Demo report 20 2 aa electrical

Demonstration Thermography report

Company

Device

Customer

E-Mail: [email protected]

Phone: 01420 544433

Andy McGrath

Tester:

32 degree wide angle lensLens:

1434423Serial No.:Testo 875 series

UK

Various Sites

Demonstration ThermographyReport

Various MeasuringDates

Measuring Date:

Thermal Images with Testo 875 seriesThermal Imaging Cameras

Various Electrical Installations/Applications for DemonstrationPurposes

Thermal Surveys

Measuring Site:

Demonstration Thermography Report, to demonstrate the Capabilities ofthe Testo Thermal Imaging cameras and the Testo IR software.Demonstration Thermography Report of various Electrical Installations /Applications.

Task

Alton, Hampshire, GU34 2QJ

Newman Lane

Testo Ltd

1/18Page


File:

IV_00041.BMT 17/06/2008

Measuring Time:

15:23:23

20.0Refl. temp. [°C]:

0.95Emissivity:

Picture parameters:

Date:

Picture markings:

RemarksRefl. temp. [°C]Emiss.Temp. [°C]Measurement Objects

-20.00.9596.8Measure point 1








Thermal and Digital images taken with Testo 875 series Thermal Imaging camera. Images of Electricalequipment for Demonstration purposes to show the capabilities of the Testo 875 and the Testo IR software.Image of Electrical connections. As can be seen from the spot temperature markers on the thermal image,these connections are showing High temperatures and require further investigation.

Remarks:

2/18Page


File:

IV_00393.BMT 12/08/2010

Measuring Time:

13:45:48


0.95Emissivity:

Picture parameters:

Date:

Picture markings:



-20.00.9549.5Hot spot 1

Profile line:

Demonstration Thermal Images of Electrical Installations.Thermal and Digital images taken with Testo 875 series Thermal Imaging camera.The Thermal image is displayed in " Blue / Red " Palette.Some features of the Testo IR software have been applied to the image to highlight / indicate comparativeTemperatures. The Auto Hot Spot Indicator HS1 is applied to automatically indicate the hottest point in thedefined area. Temperature profiles graphs applied to show temperature variation across components.

Remarks:

3/18Page


File:

IV_00218.BMT 28/10/2009

Measuring Time:

14:38:29


0.95Emissivity:

Picture parameters:

Date:

Picture markings:



-20.00.95142.7Hot spot 1

Profile line:

Demonstration Thermal Images of Electrical Installations.Thermal and Digital images taken with Testo 875 series Thermal Imaging camera.The Thermal image is displayed in " Iron " Palette.Some features of the Testo IR software have been applied to the image to highlight / indicate comparativeTemperatures. The Auto Hot Spot Indicator HS1 is applied to automatically indicate the hottest point in thedefined area. Temperature profiles graphs applied to show temperature variation across components.

Remarks:

4/18Page


File:

IV_00223.BMT 28/10/2009

Measuring Time:

14:44:52


0.95Emissivity:

Picture parameters:

Date:

Picture markings:





-20.00.9551.6Hot spot 1


Remarks:

5/18Page


File:

IV_00275.BMT 14/05/2010

Measuring Time:

11:16:42


0.95Emissivity:

Picture parameters:

Date:

Picture markings:




-20.00.9553.5Hot spot 1

Profile line:

Demonstration Thermal Images of Electrical Installations.Thermal and Digital images taken with Testo 875 series Thermal Imaging camera.The Thermal image is displayed in " Iron " Palette.The Auto Hot Spot Indicator HS1, indicates the Apparent temperature of one of the supply cables.Some features of the Testo IR software have been applied to the image to highlight / indicate comparativeTemperatures. The Auto Hot Spot Indicator HS1 is applied to automatically indicate the hottest point in thedefined area. Temperature profiles graphs applied to show temperature variation across components.

Remarks:

6/18Page


File:

IV_00267.BMT 14/05/2010

Measuring Time:

11:09:59


0.95Emissivity:

Picture parameters:

Date:

Picture markings:


-20.00.9550.0Hot spot 1

Profile line:


Remarks:

7/18Page


File:

IV_00268.BMT 14/05/2010

Measuring Time:

11:10:16


0.95Emissivity:

Picture parameters:

Date:

Picture markings:



-20.00.9560.3Hot spot 1

Profile line:


Remarks:

8/18Page


File:

IV_00271.BMT 14/05/2010

Measuring Time:

11:11:37


0.95Emissivity:

Picture parameters:

Date:

Picture markings:




-20.00.9571.9Hot spot 1

Profile line:

Demonstration Thermal Images of Electrical Installations.Thermal and Digital images taken with Testo 875 series Thermal Imaging camera.The Thermal image is displayed in " Hot / Cold " Palette.Some features of the Testo IR software have been applied to the image to highlight / indicate comparativeTemperatures. The Auto Hot Spot Indicator HS1 is applied to automatically indicate the hottest point in thedefined area. Temperature profiles graphs applied to show temperature variation across components.

Remarks:

9/18Page


File:

IV_00272.BMT 14/05/2010

Measuring Time:

11:12:06


0.95Emissivity:

Picture parameters:

Date:

Picture markings:




-20.00.9544.8Hot spot 1


Remarks:

10/18Page


File:

IV_00355.BMT 03/12/2008

Measuring Time:

10:12:57


0.95Emissivity:

Picture parameters:

Date:

Picture markings:


Spot Temp 1 on Grey Phase ofIsolator

20.00.9546.8Measure point 1

Spot Temp 2 on Black Phasecable


Spot Temp 3 on Red Phasecable


Spot Temp 4 on Blue Phasecable


Profile line:

Thermal and Digital images taken with Testo 875 series Thermal Imaging camera. Images of Electricalequipment for Demonstration purposes to show the capabilities of the Testo 875 and the Testo IR software.Isolator SwitchThermal image indicates the spot temperatures of the Phase connections.A temperature profile line graph has been applied horizontally across the cables to highlight the temperaturevariation.As can be seen, the Grey phase is considerably hotter in comparison to the other phases.It is therefore recommended that an inspection of these connections is conducted.

Remarks:

11/18Page


File:

IV_00273.BMT 14/05/2010

Measuring Time:

11:14:58


0.95Emissivity:

Picture parameters:

Date:

Picture markings:



-20.00.9562.6Hot spot 1

Profile line:

Demonstration Thermal Images of Electrical Installations.Thermal and Digital images taken with Testo 875 series Thermal Imaging camera.The thermal imagehighlights the apparent temperature of a cable enclosed in the conduit.The Thermal image is displayed in " Iron " Palette.Some features of the Testo IR software have been applied to the image to highlight / indicate comparativeTemperatures. The Auto Hot Spot Indicator HS1 is applied to automatically indicate the hottest point in thedefined area. Temperature profiles graphs applied to show temperature variation across components.

Remarks:

12/18Page


File:

IV_00423.BMT 11/12/2008

Measuring Time:

15:36:20


0.95Emissivity:

Picture parameters:

Date:

Picture markings:


Spot Temp 1 Red Phase20.00.9583.3Measure point 1



-20.00.9590.7Hot spot 1

Profile line:

Demonstration Thermography Survey.Thermal Survey of Main Electrical Supply Cabinet, using the Testo 875 series Thermal Imaging camera.Thermal and Digital image of all the Supply Panel. This is achieved in the confined space due to the Testo875 camera being equipped as standard with a 32 degree, Wide Angle Lens.3 Spot Temp markers have been added along with the Auto Hot Spot Indicator HS1, to indicate temperaturesalong with a Temperature Profile Line Graph.

Remarks:

13/18Page


File:

IV_00356.BMT 03/12/2008

Measuring Time:

10:13:47


0.95Emissivity:

Picture parameters:

Date:

Picture markings:


Red Phase cable20.00.9537.5Measure point 1

Black Phase cable20.00.9541.1Measure point 2

Grey Phase cable20.00.9541.0Measure point 3

Blue Phase cable20.00.9528.5Measure point 4

-20.00.9542.3Hot spot 1

Profile line:

Thermal and Digital images taken with Testo 875 series Thermal Imaging camera. Images of Electricalequipment for Demonstration purposes to show the capabilities of the Testo 875 and the Testo IR software.Isolator SwitchThermal image indicates the spot temperatures of the Phase connection cables higher up in the control panelabove the Isolator switch.A temperature profile line graph has been applied horizontally across the cables to highlight the temperaturevariation.

Remarks:

14/18Page


File:

IV_00040.BMT 16/02/2010

Measuring Time:

11:31:05


0.95Emissivity:

Picture parameters:

Date:

Picture markings:


-20.00.9591.1Hot spot 1

Profile line:

Thermal and Digital images taken with Testo 875 series Thermal Imaging camera during a Demonstration ofthe camera.The images taken have been used to compile an example report to demonstrate the capabilities of the TestoThermal Imaging camera and the Testo IR software.The image is of a Conveyor Motor which is part of the Sheeting Production Line.The Auto Hot Spot indicator (HS1) has been applied to the thermal image to automatically indicate thehottest point in the defined area.As can be seen, the Hottest point on the motor is approx 93 deg C.This should be compared to the Manufacturers Operating Temperature range and monitored in the future. Incomparison to other Motors on this Conveyor system, this motor is running at a considerably hottertemperature. Additional Spot temperature markers have been added to other sections of the motor forcomparison purposes. A Temperature Profile Line graph has been applied to give further visualrepresentation of the temperature profile across the motor.The thermal image is displayed in " Iron " Palette.

Remarks:

15/18Page


File:

IV_00204.BMT 13/10/2008

Measuring Time:

16:14:05


0.95Emissivity:

Picture parameters:

Date:

Picture markings:


SpotTemp 1 on Pump Body 120.00.9571.6Measure point 1

Spot Temp 2 on Flangeconnector


Spot Temp 3 on Flangeconnector


Spot Temp 4 on Pump Body 220.00.9560.1Measure point 4

-20.00.9572.7Hot spot 1

Profile line:

Demonstration Thermal Images of Electrical Installations.Thermal and Digital images taken with Testo 875 series Thermal Imaging camera.The Thermal image is displayed in " Iron " Palette.Some features of the Testo IR software have been applied to the image to highlight / indicate comparativeTemperatures. The Auto Hot Spot Indicator HS1 is applied to automatically indicate the hottest point in thedefined area. A Temperature profile graph applied, to show temperature variation across components.AnIsotherm has been applied to highlight by colour, the area of the component that is within a definedtemperature range.

Remarks:

16/18Page


File:

IV_00702.BMT 14/04/2009

Measuring Time:

11:44:38


0.95Emissivity:

Picture parameters:

Date:

Picture markings:


Spot Temp 1 for comparisonpurposes.








Auto Hot Spot Indicates Hottestpoint in defined area

20.00.9549.1Hot spot 1

Profile line:

Thermal and Digital Images taken with Testo 875 series Thermal Imaging camera as part of Demonstrationof camera.Images taken to demonstrate the capabilities of the Testo 875 and the Testo IR software.Images are of a Control Motor in a Production Line.The Auto Hot spot indicator has been applied to the thermal image to indicate the Hottest point in the definedarea.Additional Spot Temperature markers have been added to provide temperature comparisons on other partsof the component.A Temperature profile line graph has been applied to show the temperature profile across the component.

Remarks:

17/18Page


Demonstration Report utilising the Testo range of Thermal Imaging cameras and Testo IR software.The objective of this Demonstration Thermography report is to demonstrate the report producing capabilities of the software and the Quality of the Thermal images captured with Testo Thermal Imaging cameras.The report is for demonstration purposes only.The images are not to highlight any specific anomalies in Electrical Installations. The images were taken during Demonstration visits and reproduced to demonstrate the capabilities of the cameras and software.

This is an example of the "Standard" report template from the software, using images from Testo Thermal Imaging cameras, compiled into a Report using the Testo IR software.

The Thermal and Digital images are of various Electrical Installations / Applications.

The Thermal images indicate the "Apparent" temperatures on the equipment.

As the images are for Demonstration purposes, no account has been made in respect of Emissivity values for Materials or Reflected Temperature, therefore the indicated temperatures are "Apparent" Temperatures.

Some of the features of the camera and the software have been applied to the thermal images.

Spot Temperature Markers have been added to the thermal image to indicate temperatures and to highlight the temperature variation.

Auto Hot Spot Indicator has been applied which automatically highlights the hottest point in the defined area.

Temperature Profile Line Graph, shows the temperature variation in graph form across the electrical components.

The thermal images can been presented in various palettes such as " Iron " and " Blue / Red", from the selection of palettes available in the camera and the software.The Thermal/Digital images are time and date stamped to verify the time and date when the images were taken.The report also stipulates the emissivity value relating to the thermal image.

Andy McGrath

,27/07/2010

Review:

18/18Page

Art & Photos

Demo report 20 2 aa electrical