WELFAREHIRESOLUTIONS

LAE TOOL SPACEMOBILE WELFARE CABINS

The ‘LAE Tool Space’ has been developed to allow the safe storage of tools and equipment on-site. There are also increasing restrictions on what vans can carry and this especially has an impact for businesses involved with the many utility contracts.

Often the requirement will mean running from a central yard that requires the vans to load up the tools in the morning and

returning at the end of every day, impacting on the working time available. Clearly it would be more productive to leave the tools on-site.

Additionally leaving tools in the secure ‘LAE Tool Space’ helps reduce the weight and space issues of the workforces vans.

Technical Details

Net Weight: 1200kg

Capacity: 750kg

Unit Length: 3.60 metres

Unit Width: 2.30 metres

Unit Height: 2.37 metres

Towing Length: 5.20 metres

Towing Height: 2.69 metres

INTRODUCING LAE TOOL SPACEThe anti vandal mobile tool store.

Tool Space

Main Storage Area

WELFAREHIRESOLUTIONS

LAE TOOL SPACEMOBILE WELFARE CABINS

Tel: 01695 722 833

Mob: 07436 100689

Fax: 01695 556 865

Email: plant@lae-ltd.com

Web: www.welfare2go.co.uk

LAE Welfare Hire SolutionsUnit 1 Garnett Place, Skelmersdale Lancashire WN8 9UB

Features and Benefits Detail

Options

We have designed the ‘LAE Tool Space’ around the standard mobile welfare unit which has a number of benefits:

3 cabin doors for greater access, 1 on the side and 2 at the rear.

Visually looks like our ‘Comfort Space’ Welfare Unit, attracting less attention.

Hydraulically lowered axle arrangement is carried over so when located on-site the ‘LAE Tool Space’ is very easy to load and unload.

Anti-vandal design incorporating double locking door mechanism.

Locking towing cover hood with integrated ‘swivel’ jockey wheel which prevents the loss of individual wheel type assembly.

As with all LAE Welfare Hire Solutions the ‘LAE Tool Space’ is constructed of high quality steel, corrugated for increased strength and our very secure anti vandal locking mechanism.

Inside we can configure the ‘LAE Tool Space’ to your individual requirements. All our units are finished with a quality ply lined interior for all the walls and roofing. The floor is finished with a high-quality treated load bearing ply and then finished with a fuel and containment resistant anti slip surface.

Some of the options available are:

Partitioned to allow area for heavier items like vibrating tampers, wheel barrows and heavy digging implements.

Racking for small items like consumables, fixtures and fittings.

Hose racks.

Fuel storage.

Once lowered the hydraulic remote control switch can be isolated from the inside leaving the ‘LAE Tool Space’ as a very secure place to leave your businesses tool on-site.

Tool Space Lowered

Hydraulic Isolator

Hydraulic Remote Control Racking