Solenoid Valve Series

The materials included in this compilation are for the use of Dwyer Instruments, Inc. potential customers and current employees as a resource only. They may not be reproduced, published, or transmitted electronically for commercial purposes. Furthermore, the Company’s name, likeness, product names, and logos, included within these compilations may not be used without specific, written prior permission from Dwyer Instruments, Inc. ©Copyright 2013 Dwyer Instruments, Inc.

Product List

Series SBSV-B/SBSV-S Series SSV-B/SSV-S Series SRC

Series SBSV-B/SBSV-SBrass Solenoid Valves

SpecificationsService: Compatible gases and liquids.Operating Pressure:

1/8 to 1/4˝: 0 psi (0 bar) to 188 psi (13 bar)3/8 to 2˝: 7.3 psi (0.5 bar) to 188 psi (13 bar)

Pressure Limit: 246 psi (12 bar)Wetted Material:

Brass: Body: Brass; Spring: 304 SS; Seal: NBRSS: Body: 316 SS; Spring; 304 SS; Seal: Fluoroelastomer

Temperature Limits: Process: 176°F (80°C) Ambient: 32 to 149°F (0 to 65°C)

Features

Compact, general-service, 2-way solenoid valvesUsed for air, gas, water and other liquid applicationsNormally closed design, can be oriented in any positionWide range of valve sizes and flow rangesOffers connection sizes from 1/8” to 2” NPT Offers orifice sizes from 3mm to 50mm

Series SSV-B/SSV-S

SpecificationsService: Compatible gases and liquids.Operating Pressure:

1/8 to 1/4˝: 0 psi (0 bar) to 87 psi (6 bar);3/8 to 2˝: 7.3 psi (0.5 bar) to 116 psi (8 bar).

Pressure Limit: 174 psi (12 bar).Wetted Material:

Brass: Body: Brass; Spring: 304 SS; Seal: NBR.SS: Body: 316 SS; Spring: 304 SS; Seal: Fluoroelastomer.

Temperature Limits:Process: 176°F (80°C)Ambient: 32 to 149°F (0 to 65°C)

Features

Compact, general-service, 2-way guide solenoid valvesUsed for air, gas, water, and other liquid applicationsNormally open design, can be oriented in any positionWide range of valve sizes and flow rangesOffers connection sizes from 1/8” to 2” NPT Offers orifice sizes from 3mm to 50mm

Series SRCSolenoid Replacement Coils

Specifications

Compatible Valves: SSV-S, SSV-B, SBSV-B or SBSV-S.Power Requirements: 220 VAC, 110 VAC, 24 VAC or 24 VAC.Electrical Connections: DIN connection.Enclosure Rating: NEMA13 (IP54).

Pilot Operated Valve

With a pilot operated valve, there is a minimum operating pressure differential required for the piston to stay open. If the valve is too large for the application, then the minimum operating pressure differential may not be achieved, which will result in a valve that will not open or might fail to stay open.

Solenoid Valve Applications

Refrigeration SystemsSolenoid valves are used in refrigeration systems primarily to turn the refrigerant flow on and off. A pump down system is usually used to isolate refrigerant in the receiver. A thermostat is used to open or close the valve. When cooling is required, the valve opens until desired temperature, then the thermostat opens and the thermostat closes.

Combustion

Solenoid Valves are used in automation, for the security of combustion equipment for boilers, furnaces and more, also for the oil and petrochemical industries.

Irrigation SystemsWhen a small electric current is sent into the solenoid spring, the valve is activated. The spring becomes a small magnet, coils tighter and pulls the piston backward. This then seals the hole allowing air into the chamber. Without this pressure, the diaphragm is pushed out of the way by the incoming water, allowing the water to freely pass through the irrigation solenoid valve. When the current stops, air pressure comes back into the valve and closes the diaphragm.

Food Processing Machinery

Solenoid valves are used in many food processing machines, such as Bottle Washers, Poultry Feeding Systems, Hen House Wash-down Systems. They are also used in Bakeries in Pot/Pan Cleaning Spray Arms and Bun Warmers. All work accordingly when solenoid valves allow liquid or gas through according to an electric current.