Vyatka State University, Kirov

Technology of Mechanical engineering (TM ) Department

610000, Russia, Kirov, Moskovskaya str., 36, ph. +7 8332 539269, e-mail: kaf_tm@vyatsu.ru

General Information History The Department was founded in 1963 Academics The department trains students, undergraduates and graduate students involved in the

retraining and advanced training of specialists of industrial enterprises and other organizations.

Undergraduate Education Graduate Education Post-graduate Education • Advanced Training and Retraining Research Scientific direction of the department – engineering and design quality assurance

of machining and assembly technological processes, metalworking process optimization

More than 1000 publications People Department staff members: Educational research staff (2 professors, 7 associate

professors, 2 senior lecturers), engineering and educational supporting staff.

The department has a post-graduate courses: postgraduate students are being prepared in a scientific specialty “Technology and equipment for mechanical and physical-technical treatment”

2 doctoral dissertations and 20 master's theses, more than 150 patents, more than 100 research works Theses topics: - Use of high-voltage discharge in a fluid for industrial purposes - Processing problems of non-rigid parts and technology quality assurance processes of machining

and assembly - - Automation of assembly processes with the use of industrial robots - - Processes of chip formation during cutting in order to manage the process of handling viscous and

difficult to machine materials - - Diagnosis of treatment processes, development of high-performance control systems - - Superplastic shaping

Research Work

Since 1969 at the Department and its laboratory of electro-technologies have been developed a number of systems for electric hydroimpulsive stamping, molding powders, cleaning nozzles of diesel heavy-duty trucks and marine engines, and other facilities for special purposes, which were introduced in enterprises of Kirov, Izhevsk, Sarapul, Chelyabinsk, Leningrad. More than a dozen candidates of technical sciences were prepared (G.P.Кuznetsov, 1975; V.D.Perevoshchikov, 1976; G.P.Kazenin, 1976; V.V.Fominykh, 1976, N.B.Grebyonkin, 1978; M.I.Zemtsov, 1982, etc.). In 1999 G.P.Kuznetsov had defended his doctoral dissertation.

Research Work

Under the leadership of L.A. Vasilevykh was established scientific and industrial laboratory of engineering technology. Laboratory work has been linked to problems processing of non-rigid parts and design and technological quality assurance processes of machining and assembly. On this subject have been performed research work in Kirov and region enterprises (plants «Мayak», «Selmash», «Кrasnuy instrumentalshchik», «Мolot»),and also in companies and organizations from Moscow, Nizhniy Novgorod, Kuibyshev, Leningrad.

Research Work

Research Work

Under the leadership of Prof. Kudinov there were some works on: diagnosis treatment processes, the development of high-performance control systems, research in the field of contemporary modular cutting tool, the cutting chip formation processes in order to manage the process of handling viscous and difficult to machine materials. Under the direction there were defended theses by A.V. Gajda, Svetlakov B.G., Kuimov E.A., Flaksman A.L., Vinogradov D.O.

Scientific directions

• Design and technological quality assurance processes of machining and assembly process optimization metal (Supervisor: Ph.D., Associate Professor Kuimov E.A.) • Investigation of the process of superplastic forming products made from sheet materials (Supervisor: Ph.D., Associate Professor of Apatov Yu.L.) • Improving the thermal processing of non-ferrous metals. Statistical quality control of heat treatment and plastic processing (Supervisor: Ph.D., Professor Pevzner M.Z.) • Investigation of the structure and properties of the hollow sections of continuous casting in a controlled cooling (Supervisor: Prof. Chasnikov A.Ya.) • Development work on the development of non-standard equipment (Supervisor: Ph.D., Associate Professor Zhuykov V.A.)

Scientific directions

Currently, the department is working towards:

the development of the theory and techniques of construction and operation of high-performance processing and assembly automation systems, the development and implementation of methods of low-waste, low-power and strengthening technology, engineering support products reliability, increased manufacturability of product design, automation and mechanization of mechano-assembly production (use of industrial robots , rotary and conveyor lines, CNC machine tools).

Scientific directions The creation of new processes forming superplastic materials, including the development of combined processes, the development of new principles of integrated technologies for the manufacture of hollow structures through the use of nanostructured materials, development of stamping stations

Improvement of the heat treatment of non-ferrous metals, including in a transverse magnetic field to enhance uniformity of material properties, optimum width using statistical quality control. Study of the structure and properties of continuously cast hollow profiles to create new alloys having higher performance.

Scientific directions

Scientific directions Development of original technological equipment,

including automated, for a variety of activities.

Installation for trapezoidal sheet of galvanized steel C20. An apparatus for manufacturing curved profile for drywall panels. Machine for assembling barbed wire “Egoza”. Balancing machine. Apparatus for grinding plastics. Leading centers for lathes with manual and CNC. Venues rear adjustable for lathes with manual control and CNC. Machine for sharpening knives for the treatment of skins of fur-bearing animals. Self-centering lathe chucks with driven spindle. Touch sensors.

Examples of research works, conducted on commercial contracts with companies Research of intensive Gang of flex shafts turning on CNC machines with the mutual compensation of cutting force technology (4 inventions) Studies of non-rigid shaft turning with the use of movable lunettes-dampers Process of increasing tool life by magnetic pulse treatment research

Scientific directions

Main publications 1. Pevzner М.Z. " Improving the technology of the brass band using continuous induction heat treatment in a transverse magnetic

field " // Metallurgy and heat treatment of metals / №4, 2012, pp. 27-32. 2. Zhuykov V.А. . Technology of hardening, coating and repair: theory and practice // Zhuykov V.А., Perevoshchikov V.Д. //2012. –

pp.129-130. 3. Pevzner M.Z. Advancing the process of production of brass strips using continuous induction heat treatment in transverse

magnetic field // Metal Science and Heat Treatment (Springer. New York, USA). - 2012. - Vol. 54. - № 3-4, July. - P. 178-183. 4. Chasnikov А.Ya. Reasons for adhesion of thin copper strips during annealing. / Chasnikov А.Ya., Zinovyev А.V., 5. Duya.H,// Proceedings of the XIII International Conference "New technologies and advances in metallurgy and materials science",

Poland, May 2012 , pp. 323-326. 6. Chasnikov А.Ya. Features of using scrap brass shell casings LK75-05 for the production of flat products // X International

Conference "New Trends rational use of recycled resources and environmental problems", Moscow, 2012 . 7. Аpatov К.Yu. Getting thin figurine jewelry superplastic fwith orming. / Аpatov К.Yu., Аpatov Yu.L. // Fourteenth International

Scientific and Practical Conference "Research, development and application of high technology in the industry. 06-08.12.2012, St. Petersburg, Russia.

8. Ivanov-Polskiy К.V. Thermophysical criteria for small-diameter welded joints // Fourteenth International Scientific and Practical Conference "Research, development and application of high technology in the industry. 06-08.12.2012, St. Petersburg, Russia

9. Kuimov Е.А. . The homogeneity properties of the brass band, annealed in a transverse magnetic field. / Kuimov Е.А. , Pevzner МZ. // Fourteenth International Scientific and Practical Conference "Research, development and application of high technology in the industry. 06-08.12.2012, St. Petersburg, Russia.

10. Pevzner M.Z. Processing, metallurgy and quality management of rolled Cu and Al. / Pevzner M.Z.// LAMBERT Academic Publishing, Germany, ISBN: 978-659-13962-8, p.508 .

11. Pevzner М.Z. The energy method for the continuous monitoring and control of induction heat treatment of steel in a transverse magnetic field. // Roll production / №2, 2012, pp. 27-31.

12. Pevzner М.Z. Induction of annealing ferrous roll results and prospects of implementation / Roll production / №11, 2011, pp. 28-38.

13. Etc.

Patents and Copyrights

1. Patent RF № 83952, 27.06.09 , The apparatus for forming sheet products in the process state of superplasticity. Apatov Yu.L., Apatov К.Yu., Tsepin М.А., Nguen Tchyong An. Supporting now

2. Patent RF № 2306996, 27.09.2007, A method for producing products of blanks in a state of superplasticity. Apatov Yu.L., Apatov К.Yu., Tsepin М.А., Afrikantov А.А. Supporting now

3. Patent RF № 20051326611/22, 12.11.2007, Device for stamping in a state of superplasticity. Apatov Yu.L., Apatov К.Yu., Tsepin М.А., Polyakov S.М.

4. Patent RF № 54541, 10.07.2006, Device for stamping in a state of superplasticity. Apatov Yu.L., Apatov К.Yu., Tsepin М.А., Polyakov S.М.

5. etc., more than 150 patents and copyrights.

Swiss patent DE Patent

Italian patent Swedish patent

More than 150 copyright certificates

Over the past 7 years:

-109 scientific papers, including 14 articles in publications of Higher Attestation Commission

- 5 monographs

- 3 articles in publications that are not included in the list of Higher Attestation Commission

- 12 publications in the Proceedings of the International Conferences

- 70 papers in the collections of national and regional conferences

- 5 patents, including utility model

Research Work

List of works

• Automation tools equipment of engineering industries design

• Automated machine tool modules for machining parts, including using industrial robots development

• Statistical quality control of heat treatment and plastic processing

• Investigation of the process of superplastic forming products made from sheet materials

• Development of advanced processes - Electrohydroimpulse processing and powder metallurgy

• Development of rapid method for determining the machinability of materials.

• Investigation of the influence of the build-up to the life of tool for stainless steels

List of works

• Error control devices research

• Process machining of high hardness and accurate kinematic (external and internal) threads development

• Technological residual stresses and strains in the processing of non-rigid cylindrical parts and prismatic research

• Processing technology complex body parts through the use of modern multi-purpose equipment modernization

• Development projects on the development of non-standard equipment

1. Dmitrovgrad plant for processing non-ferrous metals, 2. Polytechnic Institute, Poland, Chestokhov 3. National University of Science and Technology ”MISIS“ 4. Vyatka Machinery Plant “AVITEC” 5. Kirov Plant “Mayak” 6. Electric Machine Building Plant ”Lepse” 7. JSC "Electroprivod“ 8. JSC “VMP “AVITEC” 9. Ltd. “Akmash-Holding“ 10. JSC “Kirov plant for processing non-ferrous metals” 11. JSC “Kirov Machine Building Plant ”1st May” 12. Research Institute of Computer Technology 13. JSC “Electric Machine Plant ”Velkont”, Kirovo-Chepetsk 14. JSC “Vesta” 15. JSC «Novo-Vyatka» 16. JSC “Kirov tool plant “Krasny Instrumentalshchik” 17. JSC “Kirskabel” 18. Ltd. “LUKOIL-Komi”, etc.

Partners: