Click here to load reader
Upload
hellenll
View
58
Download
0
Embed Size (px)
DESCRIPTION
How to make basic wire jewelry? Create your own charm necklace out of several drop beads, inches of 0.5mm brass wire and chains. All techniques required are simple and easy-to-master!
Citation preview
Basic Wire Jewelry Making Project – Create Your
Own Charm Necklace
To create your own charm necklace, you can use the
most basic wire wrapping techniques as well as a few
common supplies such as acrylic rhinestone bead
and abacus glass bead. And as being regarded as a
basic jewelry making project, we have involved all
detailed steps in the article. Just enjoy your first
experience!
Acrylic Rhinestone Bead
10mm Abacus Glass Bead
12mm Tube Glass Bead
Lobster Claw Clasp
Chain
Eyepin
0.5mm Brass Wire
Side Cutting Pliers
Flat Nose Pliers
Round Nose Pliers
How to create your own charm necklace?
Step 1: Make the adorable charms and other components
How to make basic wire jewelry? Create your own charm necklace out of several drop beads, inches of
0.5mm brass wire and chains. All techniques required are simple and easy-to-master!
1st, take your brass wire and acrylic rhinestone
bead, use the technique: how to cover a
briolette to turn your beads into dangling
charms. Make 5 totally for one necklace;
2nd, get an eyepin, string one 12mm tube glass
bead, and make a simple loop at the other end.
Make 4 units total;
3rd, replace the tube bead with 10mm abacus
glass bead and make 2 units in the same way;
Supplies needed in the jewelry making project:
Done!
Would you like to try the way creating your own
charm necklace? Just stay tuned for more basic
jewelry making project! It’s actually a pleasure to
share all inspirations here with you guys!
Shop for different styles of beads please clicks:
http://www.pandahall.com/
Step 2: Assemble the 3 components
above
1st, open the loop of the tube bead unit, slide on
the acrylic rhinestone charm and then another
tube bead unit. Repeat this action until you use all
of them;
2nd, adorn one 10mm abacus glass bead unit at
two ends.
Step 3: Add on the rest chain
1st, cut two strands of chain, measuring
about 12.5cm long for each;
2nd, open the loop of 10mm abacus glass
bead units and attach the chain strands on;
3rd, add on the clasp.