1 & 1 LTE Mobile Stick – ZTE MF823

Tag: 1 & 1 LTE Mobile Stick, 1&1 LTE Stick, ZTE MF823

Since summer of 2014, 1&1 also has its tariffs for mobile surfing via LTE. The basis for this is a

more compatible LTE surf stick. The model number is ZTE MF823. This can be ordered as an

option to new contracts. We show the features and specifications about 1 & 1 LTE Stick.

LTE Feature and Specifications of the 1 & 1 LTE sticks

Manufacturer and model ZTE MF823

Download rate Up to 100 MBit/s

Upload rate Up to 50 MBit/s

Compatible LTE Bands LTE 800, 900, 1800 and 2600 MHz

Backward compatible with: DC-HSPA+, UMTS, EDGE, GPRS

MIMO Support: MIMO 2x2

Connector for external antenna Yes; 2 aerial socket type TS-9 available(Buy ZTE MF823 Antenna)

LTE Category: LTE modem category 3 (3GPP Release 8)

Chipset Qualcomm

Others

Dimensions 90 mm x 28.4 mm x 13 mm

USB standard USB 2.0

LTE Feature and Specifications of the 1 & 1 LTE sticks

Memory card expansion Yes; MicroSD up to 32 GB

Compatible Operating Systems Windows XP, Windows Vista, Windows 7, Mac OS (from 10.4)

Availability www.4gltemall.com

While Telekom and Vodafone mostly rely on products from Huawei, ZTE cooperates with 1 &

1. Behind the 1 & 1 LTE stick, it hides the model number ZTE MF823. In addition, 1 & 1 offers a

mobile 4G Router (MF910) at flat rates in connection with his laptop. The LTE Stick is with a

non-branded, white version with ZTE logo.

Technical characteristics

1 & 1 LTE-Stick is a solid, typical middle class model. It supports LTE category 3 hardware, so that

the downstream hypothetically to 100 Mbit/s could be achieved. For Notebook Flats that was

good enough, as the rates offer only up to 50 MBit anyway. The device can communicate at 800,

900, 1800 and 2600 MHz by 4G. Since 1 & 1 only runs on 1.8 GHz, the MF823 stick could also

work with other network partners such as Vodafone, O2, E-Plus etc.. But you must unlocked the

1&1 LTE stick. If there is no LTE reception locally, the drive switches to 3G or 2G standards, so

that nevertheless could be surfed. If the signal is not good, over 2 sockets (TS-9) also can connect

an antenna for improved reception.

Operation and Installation

The installation is quite simple. Like many modern sticks, the 1 & 1 LTE stick also comes now

without installing an extra software. The operation and configuration takes place, easily

accessible via the browser. After first plugging it starts once a setup. This installs the necessary

drivers, as well as an icon on the desktop "4G Hostless Modem" applies. After a short time, it

further launches a browser window with the ZTE logo. Until this process is completed, it passed

no more than 30 seconds.

Conclusion

A for the 1 & 1 LTE offers quite suitable and uncomplicated stick for a small price. Simply plug in

and start surfing - so it should be a good partner to surf internet. But if you prefer the original

factory model, you could check the ZTE MF823 directly from www.4gltemall.com .