17
© 2011 Autodesk MA4712-P Simulation PowerTrack Working with Any CAD Format and Autodesk Simulation Luke Mihelcic Product Marketing Manager | Digital Simulation

© 2011 Autodesk MA4712-P Simulation PowerTrack Working with Any CAD Format and Autodesk Simulation Luke Mihelcic Product Marketing Manager | Digital Simulation

Embed Size (px)

Citation preview

© 2011 Autodesk

MA4712-P Simulation PowerTrack Working with Any CAD Format and Autodesk SimulationLuke MihelcicProduct Marketing Manager | Digital Simulation

© 2011 Autodesk

Course Outline

Welcome and Introduction Manipulation and Preparation

Simplification Tools Best Practices

Working with non-Native CAD Importing / exporting Best practices

Direct Modeling Crash course Tool Best practices

Geometry Challenges with simulation models

© 2011 Autodesk

Class Summary

Learn how multi-CAD engineering organizations are using Autodesk Simulation tools. Autodesk Inventor® Fusion allows the integration of virtually any CAD model into Autodesk Simulation.

Learning ObjectivesAt the end of this class, you will be able to: Use Inventor Fusion to manipulate and prepare simulation models Work with CAD models from virtually any system Realize the benefits of direct modeling Identify and overcome typical CAD challenges when working with various CAD

systems

© 2011 Autodesk

Welcome

Email: [email protected]: https://twitter.com/lmihelcic Facebook: http://www.facebook.com/pages/Autodesk-Simulation/134510189984528

Questions for the audience…….Do you use Inventor, Pro/E, SW, NX…..?Do you simulate?Do you simplify?Do you create simulation only models?

© 2011 Autodesk

Manipulation and Preparation

© 2011 Autodesk

Tools at your disposal

Simplify Fillets

Constant size Fillet or Round

Chamfers Equal length

Holes Thru holes Counter bore

Actions Delete Create favorite Select

© 2011 Autodesk

Tools at your disposal

Find Features Fillets Holes Chamfers Extrudes Revolves Patterns Mirrors

© 2011 Autodesk

Working with non-Native CAD

© 2011 Autodesk

Tools at your disposal

Find Features 9 native file types 5 neutral

© 2011 Autodesk

Direct Modeling for Simulation

© 2011 Autodesk

Fusion Modeling Tips for Simulation

No gap No overlaps Avoid no-critical features

Fillets Chamfers Holes Close proximity features Patterns

© 2011 Autodesk

Fusion Modeling Tools

Sketching Parts Assemblies Iterating

© 2011 Autodesk

Geometry Challenges with simulation models

© 2011 Autodesk

When and Why to Simplify

Run time High element count Repetitive features

Geometry Import Failure Flow only

© 2011 Autodesk

Q & A

© 2011 Autodesk

Autodesk University Session Feedback

Your feedback is very important to Autodesk.

You can complete the session survey on your mobile device, PC, or at a survey station.

Each completed session survey enters you in that day’s drawing for a free AU 2012 pass.

You can help make AU 2012 better!

Complete the AU Conference Survey at a survey station and receive an AU 2011 T-Shirt.

© 2011 Autodesk

Autodesk, AutoCAD* [*if/when mentioned in the pertinent material, followed by an alphabetical list of all other trademarks mentioned in the material] are registered trademarks or trademarks of Autodesk, Inc., and/or its subsidiaries and/or affiliates in the USA and/or other countries. All other brand names, product names, or trademarks belong to their respective holders. Autodesk reserves the right to alter product and services offerings, and specifications and pricing at any time without notice, and is not responsible for typographical or graphical errors that may appear in this document. © 2011 Autodesk, Inc. All rights reserved.