· 9.3 Fuseal Squared™ PP Page Fuseal Squared Pipe 9.4 Fuseal Squared Fittings 9.5 Fuseal Squared Fusion Accessories 9.11 Effective Jan. 1, 2013. See for updated info

Section 9

FUSEAL Squared® Double Containment Corrosive

Waste Piping System

P08

0109

0

Effective Jan. 1, 2013. See www.gfpiping.com for updated info.

Glossary

S = Fuseal Electrofusion Socket

SPG = Spigot End (same dimension as pipe outside diameter)

FT = Female Thread (straight)

MT = Male Thread (straight)

MPT = Male Pipe Thread

FPT = Female Pipe Thread

PPFR = Polypropylene Flame Retardant

PPNFR = Polypropylene Non-Flame Retardant

* = Non-returnable/Non-cancellable

^ = 40% Restocking Fee

Product Line Description Discount

07 Fusion Accessories52 Fuseal PPFR Fusion Fittings-molded55 Fuseal Squared® PPNFR Sch. 40 Fittings56 Fuseal Squared® PPNFR Sch. 40 Pipe60 Fuseal Squared® PPFR Sch. 40 Fittings61 Fuseal Squared® PPFR Sch. 40 Pipe

The technical information given in this publication implies no warranty of any kind and is subject to change without notice. Please consult our Terms and Conditions of Sale.

Not for Use with Compressed Air or Gases

DO NOT TEST with Air or Air over Water

GF Piping DOES NOT RECOMMEND the use of thermoplastic piping products for systems to transport or store compressed

air or gases, or the testing of thermoplastic piping systems with compressed air or gases in above or below ground

locations. The use of GF Piping products in compressed air or gas systems automatically voids the warranty for such

products, and their use against our recommendation is entirely the responsibility and liability of the installer. GF Piping

will not accept responsibility for damage or impairment from its products, or other consequential or incidental damages

caused by misapplication, incorrect assembly, and/or exposure to harmful substances or conditions. The only exception

to this recommendation is when testing the Contain-It™ Secondary Containment System or the Fuseal Squared® Double

Containment Piping System’s Containment joints.

P0801090


9.3

Fuseal Squared™ PPPage

Fuseal Squared Pipe 9.4

Fuseal Squared Fittings 9.5

Fuseal Squared Fusion Accessories 9.11


Fuseal Squared™ PP

^ = 40% Restock Charge* = Non-Cancelable/Non-Returnable

9.4

Fuseal Squared Pipe10 ft. lengths ASize[inch]

NFRPart No.

USD/ft FRPart No.

USD/ft

1 1∕2 x 4 37G013015 * 38.82 37F013015 * 48.542 x 4 37G013020 * 41.26 37F013020 * 52.183 x 6 37G013030 * 61.88 37F013030 * 78.864 x 8 37G013040 * 69.16

6 x 10 37G013060 * 99.508 x 12 37G013080 * 134.68

Size[inch]

Mini-mumFootage[ft]

PrimaryO.D.[inch]

Contain-mentO.D.[inch]

P1[inch]

P2 P3[inch]

1 1∕2 x 4 10 1.900 4.500 20.00 2 sps @ 40" = 6'-8" 1.502 x 4 10 2.375 4.500 20.00 2 sps @ 40" = 6'-8" 2.003 x 6 10 3.500 6.625 20.00 2 sps @ 40" = 6'-8" 2.004 x 8 10 4.500 8.625 20.00 2 sps @ 40" = 6'-8" 2.00

6 x 10 10 6.625 10.750 20.00 2 sps @ 40" = 6'-8" 2.008 x 12 10 8.625 12.750 20.00 2 sps @ 40" = 6'-8" 3.00

20 ft. lengths ASize[inch]

NFRPart No.

USD/ft FRPart No.

USD/ft

1 1∕2 x 4 37G023015 * 38.82 37F023015 * 48.542 x 4 37G023020 * 41.26 37F023020 * 52.183 x 6 37G023030 * 61.88 37F023030 * 78.864 x 8 37G023040 * 69.16 37F023040 * 92.22

6 x 10 37G023060 * 99.50 37F023060 * 128.628 x 12 37G023080 * 134.68 37F023080 * 175.94

Size[inch]

Mini-mumFootage[ft]

PrimaryO.D.[inch]

Contain-mentO.D.[inch]

P1[inch]

P2 P3[inch]

1 1∕2 x 4 20 1.900 4.500 24.00 4 sps @ 48" = 16'-0" 1.502 x 4 20 2.375 4.500 24.00 4 sps @ 48" = 16'-0" 2.003 x 6 20 3.500 6.625 30.00 3 sps @ 60" = 15'-0" 2.004 x 8 20 4.500 8.625 30.00 3 sps @ 60" = 15'-0" 2.00

6 x 10 20 6.625 10.750 30.00 3 sps @ 60" = 15'-0" 2.008 x 12 20 8.625 12.750 30.00 3 sps @ 60" = 15'-0" 3.00




9.5

Fuseal Squared FittingsPrimary Coupling (S x S) AEach DC fitting supplied with primary coupling(s) installed on upstream primary leg(s)Downstream primary leg may require primary couplingEach DC pipe length may require a primary couplingSize[inch]

NFRPart No.

USD FRPart No.

USD N[inch]

1 1∕2 527001 17.80 0.062 527002 22.55 0.063 527003 28.49 0.134 527004 40.35 0.136 527006 64.10 0.198 527008 * 285.14 0.25

Closure Coupling (S x S) AOne required per jointSize[inch]

NFRPart No.

USD FRPart No.

USD PackQty

L[inch]

4 557004 82.50 607004 105.56 2 6.006 557006 99.50 607006 128.62 2 8.008 557008 189.28 607008 273.00 2 8.00

10 557010 * 382.20 607010 * 539.94 2 8.0012 557012 * 461.06 607012 * 655.20 2 8.00

1/4 Bend (molded x molded) (Spg x S) ASize[inch]

NFRPart No.

USD FRPart No.

USD G[inch]

K[inch]

1 1∕2 x 4 556251 297.26 606251 376.14 11.00 9.002 x 4 556252 297.26 606252 376.14 11.00 9.003 x 6 556253 376.14 606253 473.20 16.00 12.00

1/4 Bend (molded x fabricated) (Spg x S) ASize[inch]

NFRPart No.

USD FRPart No.

USD G[inch]

K[inch]

4 x 8 556254 ^ 643.06 606254 ^ 794.74 17.00 13.006 x 10 556256 ^ 812.94 606256 ^ 1013.14 19.00 16.00




9.6

1/4 Bend (fabricated x fabricated) (Spg x S) ASize[inch]

NFRPart No.

USD FRPart No.

USD G[inch]

K[inch]

8 x 12 556258 * 1092.00 606258 * 1365.00 21.00 19.00

1/8 Bend (molded x molded) (Spg x S) ASize[inch]

NFRPart No.

USD FRPart No.

USD J[inch]

K[inch]

1 1∕2 x 4 556501 242.66 606501 303.34 11.00 8.002 x 4 556502 242.66 606502 303.34 11.00 8.003 x 6 556503 291.20 606503 376.14 14.00 10.00

1/8 Bend (molded x fabricated) (Spg x S) ASize[inch]

NFRPart No.

USD FRPart No.

USD J[inch]

K[inch]

4 x 8 556504 ^ 479.26 606504 ^ 600.60 12.00 9.006 x 10 556506 ^ 637.00 606506 ^ 788.66 13.00 10.00

1/8 Bend (fabricated x fabricated) (Spg x S) ASize[inch]

NFRPart No.

USD FRPart No.

USD J[inch]

K[inch]

8 x 12 556508 * 831.14 606508 * 1031.34 14.00 12.00

45º Wye (molded x molded) (Spg x S x S) ASize[inch]

NFRPart No.

USD FRPart No.

USD GJ[inch]

GN[inch]

N[inch]

1 1∕2 x 4 556301 752.26 606301 934.26 15.00 7.00 22.002 x 4 556302 752.26 606302 934.26 15.00 7.00 22.003 x 6 556303 800.80 606303 1116.26 20.00 8.00 28.00

45º Wye (molded x fabricated) (Spg x S x S) ASize[inch]

NFRPart No.

USD FRPart No.

USD GJ[inch]

GN[inch]

N[inch]

4 x 8 556304 ^ 976.74 606304 ^ 1225.46 20.00 11.31 31.316 x 10 556306 ^ 1164.80 606306 ^ 1449.94 26.00 12.25 38.25




9.7

45º Wye (fabricated x fabricated) (Spg x S x S) ASize[inch]

NFRPart No.

USD FRPart No.

USD GJ[inch]

GN[inch]

N[inch]

8 x 12 556308 * 1619.80 606308 * 2026.26 31.00 15.00 46.00

45º Wye - Reducing (molded x molded) (Spg x S x S) AMain[inch]

Reduced[inch]

NFRPart No.

USD FRPart No.

USD GJ[inch]

GN[inch]

N[inch]

2 x 4 1 1∕2 x 4 556322 946.40 606322 1183.00 15.00 7.00 22.003 x 6 1 1∕2 x 4 556323 1049.54 606323 1310.40 18.00 7.00 25.003 x 6 2 x 4 556324 1049.54 606324 1310.40 18.00 7.00 25.00

45° Wye - Reducing (molded x fabricated) (Spg x S xS)

A

Main[inch]

Reduced[inch]

NFRPart No.

USD FRPart No.

USD GJ[inch]

GN[inch]

N[inch]

4 x 8 2 x 4 556325 ^ 1243.66 606325 ^ 1559.14 15.75 11.31 31.314 x 8 3 x 6 556326 ^ 1243.66 606326 ^ 1559.14 18.50 11.31 31.31

6 x 10 3 x 6 556327 ^ 1741.14 606327 ^ 2184.00 22.00 12.25 38.256 x 10 4 x 8 556328 ^ 1741.14 606328 ^ 2184.00 25.00 12.25 38.25

45° Wye-Reducing (fabricated x fabricated) (Spg x S xS)

A

Main[inch]

Reduced[inch]

NFRPart No.

USD FRPart No.

USD GJ[inch]

GN[inch]

N[inch]

8 x 12 4 x 8 556329 * 2548.00 606329 * 3185.00 24.00 15.00 46.008 x 12 6 x 10 556330 * 2548.00 606330 * 3185.00 26.00 15.00 46.00

Combo Wye & 1/8 Bend(molded x molded) (Spg x S x S)

A

Size[inch]

NFRPart No.

USD FRPart No.

USD GH[inch]

GK[inch]

N[inch]

1 1∕2 x 4 557301 928.20 607301 1164.80 15.25 18.00 23.502 x 4 557302 928.20 607302 1164.80 15.25 18.00 23.503 x 6 557303 1049.54 607303 1310.40 18.00 24.00 28.00

Combo Wye & 1/8 Bend(molded x fabricated) (Spg x S x S)

A

Size[inch]

NFRPart No.

USD FRPart No.

USD GH[inch]

GK[inch]

N[inch]

4 x 8 557304 ^ 1201.20 607304 ^ 1498.46 20.00 20.00 31.316 x 10 557306 ^ 1577.34 607306 ^ 1971.66 25.25 25.25 38.25




9.8

Combo Wye & 1/8 Bend(fabricated x fabricated) (Spg x S x S)

A

Size[inch]

NFRPart No.

USD FRPart No.

USD GH[inch]

GK[inch]

N[inch]

8 x 12 557308 * 2026.26 607308 * 2529.80 30.00 30.00 46.00

Combo Wye & 1/8 Bend - Reducing(molded x molded) (Spg x S x S)

A

Main[inch]

Reduced[inch]

NFRPart No.

USD FRPart No.

USD GH[inch]

GK[inch]

N[inch]

2 x 4 1 1∕2 x 4 557322 946.40 607322 1183.00 15.25 18.00 23.503 x 6 1 1∕2 x 4 557323 1170.86 607323 1468.14 16.00 20.50 26.003 x 6 2 x 4 557324 1170.86 607324 1468.14 16.00 20.50 26.00

Combo Wye & 1/8 Bend - Reducing(molded x fabricated) (Spg x S x S)

A

Main[inch]

Reduced[inch]

NFRPart No.

USD FRPart No.

USD GH[inch]

GK[inch]

N[inch]

4 x 8 2 x 4 557325 ^ 1456.00 607325 ^ 1820.00 20.00 17.00 31.314 x 8 3 x 6 557326 ^ 1456.00 607326 ^ 1820.00 20.00 19.00 31.31

6 x 10 3 x 6 557327 ^ 2184.00 607327 ^ 2717.86 25.25 24.25 38.256 x 10 4 x 8 557328 ^ 2184.00 607328 ^ 2717.86 25.25 26.25 38.25

Combo Wye & 1/8 Bend - Reducing(fabricated x fabricated) (Spg x S x S)

A

Main[inch]

Reduced[inch]

NFRPart No.

USD FRPart No.

USD GH[inch]

GK[inch]

N[inch]

8 x 12 4 x 8 557329 * 3033.34 607329 * 3822.00 26.00 24.00 46.008 x 12 6 x 10 557330 * 3033.34 607330 * 3822.00 28.00 26.00 46.00

P-Trap (molded x molded) (Spg x S) ASize[inch]

NFRPart No.

USD FRPart No.

USD L1[inch]

L2[inch]

L3[inch]

L4[inch]

1 1∕2 x 4 557201 1019.20 607201 1274.00 7.25 9.13 9.44 19.002 x 4 557202 1019.20 607202 1274.00 7.25 9.13 9.44 19.003 x 6 557203 1304.34 607203 1650.14 12.00 15.00 15.00 27.00

P-Trap (molded x fabricated) (Spg x S) ASize[inch]

NFRPart No.

USD FRPart No.

USD L1[inch]

L2[inch]

L3[inch]

L4[inch]

4 x 8 557204 ^ 1892.80 607204 ^ 2366.00 14.00 24.25 24.25 38.256 x 10 557206 ^ 2620.80 607206 ^ 3306.34 16.25 28.25 28.25 44.25




9.9

P-Trap (fabricated x fabricated) (Spg x S) ASize[inch]

NFRPart No.

USD FRPart No.

USD L1[inch]

L2[inch]

L3[inch]

L4[inch]

8 x 12 557208 * 3476.20 607208 * 4337.66 18.25 32.31 32.31 50.31

Termination Fitting (Spg x Spg) ASize[inch]

NFRPart No.

USD FRPart No.

USD L[inch]

L1[inch]

1 1∕2 x 4 558001 291.20 608001 382.20 18.00 10.752 x 4 558002 291.20 608002 382.20 18.00 11.253 x 6 558003 333.66 608003 412.54 22.00 13.254 x 8 558004 ^ 376.14 608004 ^ 473.20 22.00 13.50

6 x 10 558006 ^ 479.26 608006 ^ 600.60 22.00 8.008 x 12 558008 * 588.46 608008 * 752.26 22.00 8.00

Fitting Cleanout Adapterwith Plug Assembly (Loose) (Spg x Spg)

A

Size[inch]

NFRPart No.

USD FRPart No.

USD L[inch]

L1[inch]

1 1∕2 x 4 557701A 310.62 607701A 401.62 18.00 10.752 x 4 557702A 314.26 607702A 405.26 18.00 11.253 x 6 557703A 376.14 607703A 455.00 22.00 13.254 x 8 557704A ^ 458.64 607704A ^ 555.70 22.00 13.50

6 x 10 557706A ^ 644.28 607706A ^ 765.62 22.00 8.008 x 12 557708A * 1710.80 607708A * 1874.60 22.00 8.00

Test Fitting (Spg x Spg) ASize[inch]

NFRPart No.

USD FRPart No.

USD L[inch]

L1[inch]

1 1∕2 x 4 558501 297.26 608501 388.26 18.00 10.752 x 4 558502 297.26 608502 388.26 18.00 11.253 x 6 558503 339.74 608503 418.60 22.00 13.254 x 8 558504 ^ 382.20 608504 ^ 479.26 22.00 13.50

6 x 10 558506 ^ 485.34 608506 ^ 606.66 22.00 8.008 x 12 558508 * 594.54 608508 * 758.34 22.00 8.00

Access Tee (4" Access) (Spg x Spg x S) ASize[inch]

NFRPart No.

USD FRPart No.

USD GK[inch]

GN[inch]

N[inch]

1 1∕2 x 4 557901 442.86 607901 546.00 11.00 11.00 22.002 x 4 557902 442.86 607902 546.00 11.00 11.00 22.003 x 6 557903 515.66 607903 637.00 13.00 13.00 26.004 x 8 557904 ^ 588.46 607904 ^ 734.06 13.00 13.00 26.00

6 x 10 557906 ^ 800.80 607906 ^ 994.94 17.00 17.00 34.008 x 12 557908 * 879.66 607908 * 1092.00 18.00 18.00 36.00




9.10

Floor Drain (Spg) ASize[inch]

NFRPart No.

USD FRPart No.

USD A[inch]

B[inch]

C[inch]

L[inch]

2 x 4 557752 667.34 607752 825.06 8.50 12.00 1.63 13.633 x 6 557753 740.14 607753 928.20 8.50 12.00 1.63 13.634 x 8 557754 ^ 946.40 607754 ^ 1183.00 8.50 12.00 1.63 14.63

6 x 10 557756 ^ 1274.00 607756 ^ 1613.74 8.50 12.00 1.63 22.63

Pipe Increaser (Spg x S) AMain[inch]

Reduced[inch]

NFRPart No.

USD FRPart No.

USD N[inch]

2 x 4 1 1∕2 x 4 557022 111.62 607022 134.68 1.613 x 6 1 1∕2 x 4 557023 661.26 607023 825.06 9.383 x 6 2 x 4 557024 661.26 607024 825.06 9.384 x 8 2 x 4 557025 ^ 873.60 607025 ^ 1085.94 10.504 x 8 3 x 6 557026 ^ 873.60 607026 ^ 1085.94 9.00

6 x 10 3 x 6 557027 ^ 1170.86 607027 ^ 1462.06 14.006 x 10 4 x 8 557028 ^ 1170.86 607028 ^ 1462.06 12.008 x 12 4 x 8 557029 * 1304.34 607029 * 1644.06 18.008 x 12 6 x 10 557030 * 1304.34 607030 * 1644.06 15.00

Centralizer ASize[inch]

PPPart No.

USD PackQty

1 1∕2 x 4 557801 * 52.18 102 x 4 557802 * 60.66 103 x 6 557803 * 69.16 104 x 8 557804 * 76.44 10

6 x 10 557806 * 82.50 108 x 12 557808 * 92.22 10




9.11

Fuseal Squared Fusion AccessoriesFusion Collar with Plastic Clamp6" fusion collars without plastic clampSize[inch]

Part No. USD PackQty

1 1∕2 526282 * 8.50 102 526283 * 9.71 103 526284 * 10.93 104 526285 * 13.97 106 526287 * 15.18 10

Loose Coil4" &6" loose coils are for Closure Couplings only Size[inch]

Part No. USD PackQty

4 37F160804 * 7.14 106 37F160806 * 9.93 108 37B160808 * 28.54 10

10 37B160810 * 29.79 1012 37B160812 * 33.51 10

Metal Clamp ASize[inch]

Part No. USD lbs PackQty

4 37Z000400 * 52.13 0.399 16 37Z000600 * 68.27 0.399 18 37Z000800 * 76.95 0.500 1

10 37Z001000 * 96.81 0.600 112 37Z001200 * 104.26 0.600 1


Documents

· 9.3 Fuseal Squared™ PP Page Fuseal Squared Pipe 9.4 Fuseal Squared Fittings 9.5 Fuseal Squared Fusion Accessories 9.11 Effective Jan. 1, 2013. See for updated info