1

CPU Scoresheet Instructions (May 06 upgrade)

You will need a copy of the scoresheet program for each lifting session. Before you start practicing, save a copy of the program to a safe location!!

Note: Some of the pictures may have come from a different version of the program and may not look exactly the same as the version you are working with.

If you have problems or something isn’t working, please let me know so I can fix it.

Joe Marksteiner

Work: 513-552-2122 - joe.marksteiner@ae.ge.com

Home: 513-755-6878 - SteinMark@aol.com

Cell: 513-477-0775

2

Before Loading the PL Program

1. Open Excel

2. Change the security level in Excel

1. Click on Tools in the top of the screen

2. In the drop down Tools menu select Macro

3. In the Macro dropdown menu select Security

4. When the Security window pops up, choose Medium

5. If you have more than one lifting session, you will need a copy of the program for each session.

3

Select Lb or Kg depending on the platform weight set – it will hi-light the area for you to provide the data.

Select Lb or Kg depending on the Weigh-in scale – it will automatically be transferred to the Weigh-in and Lifting sheets. Select the flights for each wt class. At weigh-n lifters will automatically be assigned to the designated flight.

A caution note will pop up when you click the Reset button – select OK or Cancel.

Program Setup Page (start here)

M/F-DivM-O

M-M1M-M2M-M3M-M4M-JR

M-SJRF-O

F-M1F-M2F-M3F-JR

F-SJR

Div-WtCls-Total

Div-WtCls-TotalDiv-WtCls-Total

Div-WtCls-TotalDiv-WtCls-TotalDiv-WtCls-Total

Div-Wilks

Div-WtCls-TotalDiv-Wilks

Div-WtCls-TotalDiv-WtCls-Total

Women 60+Women 19-23Women 14-18

Men 14-18Women OpenWomen 40-49Women 50-59

Mens Master 50-59Mens Master 60-69Mens Master 70+

Men 19-23

DescriptionMen's Open

Mens Master 40-49

Placing CodeDiv-WtCls-TotalDiv-WtCls-Total

When you type in a meet name it is automatically loaded into the print header for the results pages, the placing page and into the title line on the Awards page. Select the type of meet from the pull down menu.

Div-WtCls-Total - Example Men’s Open lifters will compete against each other based on Weight class and total.

Div-Wilks – Example Men M4 lifters will compete against each other based on their Total x WilksCoeff

Div-Wilks-Age – lifters will compete against each other based on Total x Wilks Coef x Age Coeff.

Age coefficients are not shown on the lifting page – to see them UnHide the DATA sheet

4

Weigh-in Sheet

The Weigh-in sheet is provided to make entering data easier and reduce the chances of overwriting or deleting something important on the Lifting sheet.

If you have the Names of the lifters and their intended weight class you can type those in and assign Lot #’s before weigh-in.

The program will accommodate 8 flights (A-H). If you assigned flights by gender and weight class on the Setup page, the correct flight will automatically be entered for the lifter. Or the pull down list in the Flight cell to assign those values. Name and Age are self-explanatory.

Use the pull down list for Div – the list will show the division you entered on the Setup. Then type in rack height for Squat (RH Sq), Squat 1, RH Bp, Bench 1 and Deadlift 1.

The Placing Code should also be assigned automatically based on your inputs on the Setup sheet – if not or you want to change them you can select one from the drop down menu.

Select PL for powerlifting, BP for Bench only, or Both if a lifter is competing in both categories (this column only appears for Pl plus BP and Ironman plus BP contests.

When you’re done click the box at the top to move the weigh-in data to the Lifting sheet (this is a one time event). If you need to make changes/corrections after this, do it on the Lifting sheet (see page 10).

Entry Wt Cls Flight Name Age Div

BWt (Lb)

Lot #

RH Sq

Squat 1 Lb

RH BP

Bench 1 Lb

Deadlift 1 Lb Placing Code Team

PL BP or Both

A lifter 2 21 F-O 147 2 2 200 3 100 200 Div-WtCls-Total AAA PLA lifter 3 41 F-M 151 3 2 180 3 90 180 Div-Wilks-Age AAA PLB LIFTER 4 45 M-M 165 Div-Wilks-Age

Click here to copy Weigh-in data to Lifting sheet

5

132 Lb

Lb 170 -170

Kg L16

Flt A

Name Age M/FBWt (Lb)

WtCls (Lb)

Wilks Coeff

Lot #

RH Sq

Squat 1

Squat 2

A name4 25 F 125 132 1.1652 8 3 170A name5 25 F 135 148 1.0975 9 3 175A name6 17 F 130 132 1.1300 10 3 180A name7 25 F 145 148 1.0400 11 3 185A name8 25 F 150 165 1.0148 12 3 190A name9 25 F 155 165 0.9918 13 3 195A name14 27 F 148 148 1.0246 18 4B name1 22 M 165 165 0.7136 5 3 155B name2 25 M 175 181 0.6861 6 3 160B name3 25 M 145 148 0.7874 7 3 165B name10 45 M 140 148 0.8111 14 3 200B name11 25 M 137 148 0.8265 15 3 205

Fname4

Squat 1Rack - 3 77.1

170.0 Good

No Lift

Print Current Sheet Sort Results

Next Lifter

Spreadsheet Instructions

This section may be blank in the version of the program you are using. I tailor that section for each meet like Men’s, Master’s or High School Nationals. If you are familiar with Excel you can use the lifter’s division, and weight class (next to the name blocks) as lookup arguments for your own record information.

The screen is divided into 2 basic areas – the Current Attempt Area at the top which shows the information for the lift being performed on the platform. Most of your actions during the meet will be in this area. The only thing you do in this area is mouse click – Don’t try to type anything here!

The Scoresheet Area is used to record division, weight class, Wilks coefficient, lot number etc at weigh-in and next attempts during the meet.

A timer (I use the Xnote Stopwatch program available on the web) can be added to the sheet in any open area. Don’t delete any columns or cells or type in the gray areas of the screen – it will probably disable the macros.

You can also use the zoom control as necessary for the best display.

6

Name pulldown – this list displays the names of the lifters in the flight at the top of the lifting order - you can select any lifter in the current flight from this list. The lifter’s name will be highlighted in yellow in the scoresheet area.

Attempt pulldown – select the current attempt from this list. When you select Squat 1, Bench 1 or Deadlift 1, the program sorts the opening attempts in all the flights. When you select 2nd, 3rd or 4th attempts it only sorts the flight at the top of the lifting order. The column header for this lift will be highlighted in yellow in the scoresheet area. Note that 4th attempt column is usually hidden, but selecting it here will unhide the column on this sheet and the Results sheets.

Good and NoLift buttons – tell the program if the lift selected with the Name and Attempt puldowns was passed by the refs or turned down. They change the color of the weight on the bar (just to the left at E3 and E4) – Green for Good and Red for No-Lift. These buttons also update the Best Lift value that goes into the lifter’s total. The Next Lifter button advances to the next lifter in the flight (if you are at the end of he current flight it doesn’t do anything).

Basic Controls

132 Lb

Lb 170 -170

Kg L16

Flt A

Name Age M/FBWt (Lb)

WtCls (Lb)

Wilks Coeff

Lot #

RH Sq

A name4 25 F 125 132 1.1652 8 3 170A name5 25 F 135 148 1.0975 9 3 175A name6 17 F 130 132 1.1300 10 3 180A name7 25 F 145 148 1.0400 11 3 185A name8 25 F 150 165 1.0148 12 3 190A name9 25 F 155 165 0.9918 13 3 195A name14 27 F 148 148 1.0246 18 4B name1 22 M 165 165 0.7136 5 3 155B name2 25 M 175 181 0.6861 6 3 160B name3 25 M 145 148 0.7874 7 3 165B name10 45 M 140 148 0.8111 14 3 200B name11 25 M 137 148 0.8265 15 3 205

Fname4

Squat 1Rack - 3 77.1

170.0 Good

No Lift

Print Current Sheet Sort Results

Next Lifter

7

The Changing Flights pulldown (black background block at cell B8) moves the selected flight to the top of the lifting order. Then select the Squat 1, Bench 1 & Deadlift 1 in C3 to sort the opening attempts correctly for the new flight and put the first lifter in the name block at C1.

Basic Controls

Good

No Lift

Next Lifter

8

When the Weigh-In data was transferred to the lifting sheet the program set

1 .flight A at the top of the lifting order

2. Selected Squat 1, Bench 1, or Deadlift 1 in block B3 as required

3. Set the correct lifting order and

4. Put the name of the first lifter in the name block.

1.2.

3.

Good

No Lift

Next Lifter

Good

No Lift

Next Lifter

4.

9

1. If you need to make changes to weigh-in data, or add/remove a lifter you must unprotect the sheet first (the program automatically protects itself to minimize the chance of overwriting or deleting important information or disabling the macros).

2. To change a lifter’s information (body weight, age, div etc) unprotect the sheet (see the picture above), make the changes and sort (using the Squat 1, Bench 1, or Dead Lift 1 blocks) if necessary to move him or her to the correct flight and position in the lifting order

3. To delete a lifter, unprotect the sheet, select the row to delete and right click, choose Delete from the dropdown list.

4. To add a lifter, unprotect the sheet and type the name in at the bottom of the name column – the program will copy the formulas and formats to the new row. After you enter all the data (including the flight) Select the appropriate attempt (Squat 1, Bench 1, or Dead Lift 1) from the pull down menu to sort the lifter into the correct flight and position. The scoresheet will automatically re-protect itself when you run the next macro.

Good

No Lift

Next Lifter

10

After all the weigh-in information is loaded – and the sheet is sorted for the first flight you can click the Print Current Sheet button and print out a scoresheet for the Jury table and a one for manual backup at the score table. The Results sheet is formatted for easier printing. The Meet name form the Setup sheet should already be in the header. You can hide/unhide columns but don’t delete any. (Go to the Results sheet and set the margins, etc. – you may need legal paper to display all the information you want.) Once you get it configured properly you can get a printout of the current sheet any time you want by clicking the Print Current Sheet button on the Lifting sheet. Don’t use this feature if you don’t have a printer connected to your computer.

Good

No Lift

Next Lifter

11

Return to the Lifting sheet and Let the lifting begin!

If the 1st lifter is successful on his attempt, click on the green Good rectangle at H3, if not click on the red No Lift rectangle at H4. If you make a mistake and click the wrong one, just click on the correct one.

A Good lift will change the color of the Weight blocks to green and a No Lift will change the color to red. It also updates the information in the scoresheet area.

Click the Next Lifter button or select from the pulldown list in the name block B2-E2. They will be in the same order as the names in the name column. The program will display the new lifter’s information. When the new lifter is selected, the scoresheet will also show the status of the previous lift Green = Good and Red Strikethrough = No Lift.

Continue through the Squat 1 attempts choosing the lifter then selecting Good or No-Lift.

114 Lb

Kg 100 -100

Lb K10

F-T1lifter1

Squat 1Rack - 5 220.5

100.0 Good

No Lift

If there is a loading or spotter error and the lifter is granted another lift at the end of the round, just type in the correct weight and the cell should turn white indicating that this lift has not been taken. Come back to him/her at the end of the round using the pulldown list in the name block. You must use the Good or No lift macros to ensure the Best Lift value is updated and the subtotal/total are correct.

Good

No Lift

Next Lifter

Good

No Lift

Next Lifter

12

148 Lb

Kg 150 -150

Lb K13

Flt A

Name Age DivBWt (Lb)

WtCls (Lb)

CoeffLot #

RH Sq

Squat 1

Squat 2

A lifter1 15 F-T1 110 114 1.2867 2 5 100 110A lifter2 18 F-T3 131 132 1.1233 3 5 -110 110A lifter3 21 M-O 130 132 0.8666 4 5 105 115A lifter4 25 M-O 146 148 0.783 5 5 130A lifter6 23 F-O 145 148 1.04 7 5 145A lifter5 41 M-M1 147 148 0.7787 6 5 150B lifter10 19 M-T3 159 165 0.7328 11 5 175

M-M1lifter5

Squat 1Rack - 5 330.7

150.0 Good

No Lift

2525

2525

101010

101010252525

Lifters will be turning in their 2nd attempts and they can be entered in the Squat 2 column

When you enter the next attempt, the scoresheet will automatically resort itself so the next round attempts are in the correct lifting order. It will not change the order for the lifters waiting to lift in the current round.

After all the 1st squats are complete, Select Squat 2 from the dropdown at B3.

The program will sort the 2nd attempts for the flight at the top of the order and put the the 1st lifter in the name block at B2.

Assign Good or No-Lift to the 2nd attempts the same way as first attempts. Do 3rd attempts the same way.

There is a hidden 4th attempt column if you need it (column N). To Unhide the 4th attempt columns select Squat 4, Bench 4 or Deadlift 4 from the pulldown at B3. This unhides the 4th attempt column on the Lifting sheet and the Results sheet.

If lifters from the next flight have changes for opening squat attempts, simply enter them in the correct location and the program will update the lifting order.

Good

No Lift

Next Lifter

Good

No Lift

Next Lifter

Good

No Lift

Next Lifter

13

1.2.

3.

4.

At the end of Squats for the first flight:

1. Select the next flight to lift from the pulldown at B8 – Thjs moves the new flight to the top of the lifting order

2. Select Squat 1 from the dropdown at block C3 - This will sort the 1st attempts for the new flight and put the first lifter in the name block at B2.

3. The next flight is now ready to go – choose Good or No-lift

4. Select the next lifter and enter next attempts the same way as before.

5. Follow the above steps for the remaining flights of Squats.

Good

No Lift

Next Lifter

Good

No Lift

Next Lifter

14

1. When you are done with Squats start with A flight Bench 1 – Select Flt A at the top of the flight column (B8).

If there are changes to opening bench attempts just enter them and the program will sort them correctly – you don’t need to change the flight, the attempts or the lifter to update the next flight’s bench order.

2. Select Bench 1 from the pull-down below the name block

3. Use the Good or No-Lift buttons as appropriate

4. Select Next Lifter or use the pulldown list in the name block.

5. Proceed through Bench the same way you went through Squats.

If you are running a PL plus BP meet or an Ironman plus BP meet, the BenchResults sheet will automatically record the BP results and places when bench presses are completed (it’s activated when you select Deadlift 1)

Good

No Lift

Next Lifter

Good

No Lift

Next Lifter

15

1. Proceed through Bench press the same way you went through Squats using the pulldowns to select the flight, the attempt and the lifter.

2. Select Good or No-Lift for each attempt. After each successful bench, the lifters Sub Total will update.

3. Enter next attempts in the appropriate location.

4th attempts for Bench are in Column T if needed. The Best lift column for each lift does not include 4th attempts. It also rounds down world record records to the closest multiple of 2.5 for Kilos or 5 for Lbs.

Good

No Lift

Next Lifter

Good

No Lift

Next Lifter

Good

No Lift

Next Lifter

16

NameBirth Year Div

Body Wt Wt cls Coeff Team

PL BP Both

Bench 1

Bench 2

Bench 3

Bench 4

Best Bench

Wilks Bench

Age Coeff x Wilks

lifter1 14 F-T1 110 114 1.2867 A Both 50 55 60 0 60 77.20028 94.95635

lifter3 25 M-O 130 132 0.8666 A Both -75 75 -80 0 75 64.99622 64.99622

lifter4 23 M-O 146 148 0.7830 B BP 100 110 115 0 115 90.04568 90.04568

lifter7 35 M-O 163 165 0.7198 B BP 150 155 160 0 160 115.1605 115.1605

lifter21 31 M-O 198 198 0.6391 A Both -190 -190 190 0 190 121.424 121.424

lifter12 28 M-O 195 198 0.6442 A Both 175 -180 180 0 180 115.9477 115.9477

lifter16 24 M-O 193 198 0.6477 B Both 150 165 170 0 170 110.1084 110.1084

lifter19 19 M-T3 196 198 0.6424 C BP 200 205 -207.5 0 205 131.6982 136.9661

Bench Results

You can print out Bench Press results as soon as Bench is over on a separate sheet. The data is transferred when you select Deadlift 1.

Simply go to the BenchResults sheet. The information for all the BP lifters is on the sheet and is sorted by gender Weight class and Best Bench.

17

1. When you are done with Bench start with A flight Deadlift 1 (selecting Deadlift 1 automatically records BP data on the BenchResults page)

2. Select Flt A at the top of the flight column (B8).

If there are changes to opening Deadlift attempts just enter them and the scoresheet automatically updates the lifting order.

3. Select Deadlift 1 from the pull-down below the name block

4. The first lifter should be in the name block at B2.

5. The data for the first lifter in A flight Deadlift will appear in the current attempt area.

Good

No Lift

Next Lifter

Good

No Lift

Next Lifter

18

1. Proceed through Deadlift the same way you went through Squats and Bench using the pulldowns to select the flight, the lifter and the attempt.

2. Select Good or No-Lift for each attempt. After each successful Deadlift the lifters Total, Wilks Total, Age Coef x Wilks, and PL-Div-WtCl are computed automatically and updated.

3. During Deadlift the lifter’s current Total is displayed where rack height had been. When people change 3rd attempts on deadlift just enter the new attempts in the correct location and the program will automatically re-compute the lifting order.

4. At the end of Deadlift, click on the Sort Results rectangle, the program will arrange the lifters by Gender, Weight Class and Total.

5. The Print Current Sheet button copies the data to the Results sheet that is formatted for easier printing and copying.

19

The Results sheet is formatted for easier printing. All the data from the Lifting sheet is transferred to this sheet but may be in a hidden column. You can hide or unhide columns as necessary to show the information you want or to fit the paper in your printer.

PL only results will usually fit on letter paper in landscape mode. You may need to use legal size paper if you have 4th attempts or want to display more columns. Do a test print to make sure you margins, headers & footers etc are correct.

Don’t delete any columns on this sheet if you are going to use the program again, otherwise the information from the lifting sheet won’t be in the right columns.

You can use the Excel Auto Filter functions to display a particular weigh class or division.

Name Age DivBWt (Lb)

WtCls (Lb) Coeff

Squat 1

Squat 2

Squat 3

Bench 1

Bench 2

Bench 3

Deadlift 1

Deadlift 2

Deadlift 3 PL Total

Wilks Total

Age Coef x Wilks

Placing Pl-Div-WtCl

Tm Pts Team

lifter 8 45 F-M 146 148 1.0348 195 210 215 100 -105 -105 195 215 225 540.0 253.47 267.41 1-F-M 12 AAA

lifter 3 41 F-M 151 165 1.0101 180 -195 195 90 95 105 180 -185 185 485.0 222.21 224.43 2-F-M 9 AAA

lifter 9 35 F-O 131.5 132 1.1200 250 265 -270 125 -135 -135 250 255 -265 645.0 327.67 327.67 1-F-O-132 12 AAA

lifter 7 36 F-O 129 132 1.1368 220 -230 230 110 115 -120 220 235 240 585.0 301.67 301.67 2-F-O-132 9 AAA

lifter 6 25 F-O 131 132 1.1233 215 225 -235 110 120 135 215 225 -235 585.0 298.07 298.07 3-F-O-132 8 AAA

lifter 2 21 F-O 147 148 1.0297 200 205 225 100 110 120 200 -210 210 555.0 259.22 264.40 1-F-O-148 12 AAA

lifter 5 19 F-T 118 123 1.2190 160 175 190 80 90 -100 160 180 -195 460.0 254.35 264.52 1-F-T 12 AAA

lifter 1 19 F-T 125 132 1.1652 165 -170 170 85 -95 95 165 -180 180 445.0 235.20 244.61 2-F-T 9 AAA

lifter 4 14 F-T 137 148 1.0852 145 155 165 75 85 95 145 165 175 435.0 214.13 263.37 3-F-T 8 AAA

lifter 20 49 M-M 146 148 0.7830 375 385 405 190 205 215 375 -385 385 1005.0 356.95 397.28 1-M-M 12 AAA

lifter 14 51 M-M 179 181 0.6764 -360 -360 360 180 -190 190 360 375 -395 925.0 283.81 325.53 2-M-M 9 AAA

lifter 10 21 M-O 147 148 0.7787 400 425 445 -200 200 -220 400 -425 425 1070.0 377.92 385.48 1-M-O-148 12 AAA

Results sheet

20

Awards

This page displays up to 10 lifters/places in the selected Divisions/weight classes at the end of the meet. Data for this page is taken from the Results and BenchResults pages so those pages must have the current meet information.

Select the award categories (Division, Weight Class and Full Meet/Bench Press etc) by clicking on the underlined text and selecting from the dropdown list – these are the only inputs you make on this sheet. For Best Lifter select All weight classes and All divisions.

You can resize the page, columns or rows (don’t delete any) to fit your display and you can change the background or add your own meet graphic to the page (just unprotect the sheet). It’s OK to change the the text font/size and cell colors too.

Division M-O

75 Kilogram Class

Place NameBest

SquatBest

BenchBest

DeadliftPL

Total

1 lifter3 155 100 160 415

2 lifter4 155 110 140 405

3 lifter5 135 85 145 365

Full Meet

meet name test1

21

Make sure you save your file or you will lose all your data.

Go the Setup sheet and click on the box that says:

Reset for New Meet

and the program will clear all the data in the Weigh-In, Lifting, BenchResults and Results sheets.

Clearing Data to Re-use the program

22

Some Notes on the Program

• The program was written to accommodate up to 8 flights in a session.• Someone familiar with Excel can easily hide/unhide columns and resize the

display as necessary. They should also be familiar with print commands and formatting.

• When you click on Good or No Lift it may take several seconds for the macro to run and make all the changes to the spreadsheet – it takes longer if you have a slow processor.

• It’s a good idea to practice with the program before the meet to get used to the sequence of doing things (start with a blank Weigh-in sheet and simulate a whole meet including print out of the results).

• Save frequently during the competition!!• I did not build in a timer – I found Xnote Stopwatch (

http://www.stopwatch-timer.com/) to work well for PL meets. It has an easy to use countdown timer and it can be resized and placed in any open area of the sheet. I recommend setting up hotkeys to run the clock (I use F1=start/stop and F2=Reset) it saves mouse clicks switching from the timer to the scoresheet.