10 21 13/GLO BuyLine 0081

8/14/2019 10 21 13/GLO BuyLine 0081

1/12

10

Bu

8/14/2019 10 21 13/GLO BuyLine 0081

2/12

8/14/2019 10 21 13/GLO BuyLine 0081

3/12

Global Materials

Phenolic - Black Core

Holds up even under seve

moisture conditions from

pools and saunas, or when

maintenance includes hos

toilet partitions. Ideal for

vandalism is a problem. Icolor spectrum all with

edges. Available in all sty

Plastic Laminate

Combining design flexibility,

aesthetic appeal and economy in an

ideal finishthe proven benefits of

high pressure laminates are built in

featuring a smooth surface

highly resistant to scratches, grease,and mars. Offered in a complement

of designer colors. Available in

all styles.

Polymer (HDPE)

Polymer (HDPE) is highly resistant

to stains, common acids and cleaning

agents as well as to moisture. The

ideal choice for busy public facilities

never needs painting and will not

easily dent or chip. Available in awide variety of contemporary colors.

Floor Anchored/ Overhead Braced,

Ceiling Hung and Floor and Ceiling

Anchored styles.

8/14/2019 10 21 13/GLO BuyLine 0081

4/12

GLOBAL polymer toilet partitions are

the ideal choice for high-traffic areas.

They are environmentally safe and

sanitary, never need painting, and will

not easily dent or chip. It is the material

of choice for low maintenance.

HDPE solid polymer is water resistant

and unaffected by high humidity or

corrosive environments and cannot

delaminate. Most commercial cleaningagents will not damage the surface.

GLOBAL HDPE polymer has

homogeneous color and material

compound throughout. An aluminum

heat sink strip is applied to the bottom

edge of all doors and panels as standard.

Global Polymer (HDPE)

8/14/2019 10 21 13/GLO BuyLine 0081

5/12

Global Plastic Laminate

GLOBAL plastic laminate partitions combine

design flexibility with affordable cost. The high

pressure laminate finishes, bonded under pressure

to a solid impact-resistant particle board core, meet

or exceed all NEMAstandards. Edge banding of

all components prior to face lamination ensures

optimum water runoff and durability.

GLOBAL plastic laminate is available in all four

installation styles and a variety of designer colors to

complement vanities and counter tops. They are

the finish of choice for commercial and institutional

installations where aesthetics are essential.

Color Selection Guide

1010Mission White

1020Antique White

4000Almond

4010Sand

4410Natural Canvas

4300Lime Stone

4583Desert Zephyr

1130Neutral Glace

8/14/2019 10 21 13/GLO BuyLine 0081

6/12

Global Phenolic - Black Core

GLOBAL phenolic partitions are the material

of choice where durability and strength arerequired. These partitions are fabricated to

stand the test of time. The dense components,

combined with stainless steel brackets and

fasteners, stand up to the most extreme

conditions of moisture and humidity.

Phenolic is impact, water, and corrosion

resistant, and does not support bacteria.

The phenolic partition is decoratively faced

on both sides as an integral part of a resin-

impregnated kraft paper core. The surface

and core sheets are fused at high temperature

and pressure. In addition to strength and

serviceability, a wide range of colors

provides limitless design flexibility.

GLOBAL phenolic partitions are available inall four installation styles.

8/14/2019 10 21 13/GLO BuyLine 0081

7/12

GLOBAL Color-Thru Phenolic provides

another reason to choose phenolic. True to itsname, Color-Thru is made with surface color

through and through, to help resist damage;

and even discourage vandalism and abuse.

Along with phenolic strength, durability and

low maintenance requirement, Color-Thru

Phenolic is impact, scratch and graffiti

resistant; also it has excellent screw holding

power and all the advantages of traditionalPhenolic performance. Costs no more than

regular Global phenolic compartments.

Same construction features and hardware as

Global Black-Core Phenolic.

Color Selection Guide

COLOR-THRU: 10 W ORKING DAYS Any standard color - in all four styles.

Global Phenolic - Color-Thru

8/14/2019 10 21 13/GLO BuyLine 0081

8/12

Global Stainless Steel

GLOBAL stainless steel

toilet partitions are virtually

indestructible and retain their

gleaming beauty indefinitely.

These units combine the strength

of #304 stainless steel with a

#4 satin finish or textured

finish, formed and bonded to a

honeycomb core. The face sheets

are held rigid and permanently

in place by an interlockingstrip welded at each corner.

GLOBAL stainless steel

components are impervious

to just about any substance.

Even scratches caused by

deliberate vandalism can be

removed by buffing. Theelegance of GLOBAL stainless

steel components complements

any design scheme, either

in new construction or for

8/14/2019 10 21 13/GLO BuyLine 0081

9/12

Global powder coated steel

partitions provide high-tech

quality at an economical price.

The powder coated finish is

electrostatically applied over

stretcher level quality steel.

The finish is highly resistant

to wear, fading, staining,

scratching and scuffing. It is

easily cleaned with mild soap

and wiped dry.

The steel is electrogalvanized

to protect against corrosion

and provide a proper base for

the finish. The face sheets are

held rigid and permanently in

place by an interlocking strip

welded at each corner. Thecore is cellular honeycomb

which provides strong

construction and maximum

sound attenuation.

Global Powder Coated

8/14/2019 10 21 13/GLO BuyLine 0081

10/12

PHENOLIC - COLOR-THRU

Solid core, comprised of multiplkraft paper, phenolic resin and decsheets, all of the same color, shtogether under high temperature a

a. Floor Anchored Overhead Braceb. Floor Anchoredc. Ceiling Hungd. Floor and Ceiling Anchored

Doors shall be constructed of 3/4phenolic.Panels shall be constructed of 1/phenolic.

Pilasters shall be constructed of 3Pilaster shall include a mountcomprising a 1/4" thick x 3/4" widsteel base bar with 3/8" steel lag mounting bar shall be secured to structure with two 3/8" cadmiumanchoring studs.

a. All exposed door hardware shal

aluminum and shall be as noted:1. Heavy-duty die cast vault hinge brushed finish and have wrap-aroThe gravity acting cams shall be from 3/4" diameter nylon roddiameter stainless steel pin. Hingthrough-bolted onto doors and pilstainless steel theft resistant thr

PLASTIC LAMI NATE

High-pressure decorative plasticlaminate .050" (1.2 mm) thick bondedwith non-toxic water resistantadhesive under high pressure to 45-lb

(20.4-kg) density resin impregnatedparticle-board.

a. Floor Anchored Overhead Bracedb. Floor Anchoredc. Ceiling Hungd. Floor and Ceiling Anchored

Doors and panels finished thickness to be 1".Doors to be recessed to accept hinges withinthe plane of the door and yield bi-directionaloperation about an axis within the plane ofthe door.

Pilasters shall be 1-1/4" thick. Pilastersshall include a mounting systemcomprising a 1/4" thick x 1" wide steelbase bar with 3/8" steel lag bolts. Eachmounting bar shall be secured to thebuilding structure with two 3/8"cadmium-plated self-anchoring studs.

a. Door hardware shall be chromium

plated die cast Zamac on all exposedparts and shall be as noted:1. Hinges shall be recessed into doorand saddle mounted on the adjacentpilaster. Hinges shall be adjustable forpartial opening or self-closing of doors.2. Slide latches shall be mounted at themid-point of t he door Keepers shall be

PHENOLIC - BLACK CORE

Solid core with decorative laminate on bothsides. Materi al has multiple layers of resin-impregnated kraft and surface sheets fusedat high temperatures and pressure. Al l edgesare black.


Doors shall be constructed of 3/4" black corephenolic.Panels shall be constructed of 1/2" black corephenolic.

Pilasters shall be constructed of 3/4" phenolicPilaster shall include a mounting systemcomprising a 1/4" thick x 3/4" wide stainlesssteel base bar with 3/8" steel lag bolts. Eachmounting bar shall be secured to the buildingstructure with two 3/8" cadmium plated selfanchoring studs.

a. All exposed door hardware shall be die

cast aluminum and shall be as noted:1. Heavy-duty die cast vault hinge shall havea brushed finish and have wrap-aroundflanges. The gravity acting cams shall beconstructed from 3/4" diameter nylon rod and3/8" diameter stainless steel pin. Hingesshall be through-bolted onto doors andpilasters using stainless steel t heft resistant

M ATERIALINFORMATION

TYPESAVAILABLE:

DOORS AN D

PANELS:

PILASTERS:

HARDWARE:

SpecificationsPOLYM ER (HDPE)

High-density polyethylene (HDPE) resinswith homogeneous color throughout.

a. Floor Anchored Overhead Bracedb. Floor and Ceiling Anchoredc. Ceiling Hung

Doors and panels to be 1" thick and 55"high and have an extruded aluminumheat sink strip attached to the loweredge.

Pilasters shall be 1" thick. Pilaster shallinclude a mounting system comprising a1/4" thick x 1" wide stainless steel basebar with 3/8" steel lag bolts. Eachmounting bar shall be secured to thebuilding structure with two 3/8"cadmium-plated self anchoring studs.

a. All exposed door hardware shall be die

cast aluminum and shall be as noted:1. Heavy-duty die cast vault hinge shallhave a brushed finish and have wrap-around flanges. The gravity acting camsshall be constructed from 3/4" diameternylon rod and 3/8" diameter stainlesssteel pin. Hinges shall be through-boltedonto doors and pilasters using stainless

8/14/2019 10 21 13/GLO BuyLine 0081

11/12

M ATERIALINFORMATION

TYPESAVAILABLE:

DOORS ANDPANELS:

PILASTERS:

STAINLESS STEEL

Stretcher-leveled quality type 304 stainless steel, formed and bonded underpressure with a non-toxic adhesive to a resin-impregnated, sound-deadening,honeycomb core.


Doors and panels shall be 1" thick, constructed of two sheets of 22 gaugestainless steel. The perimeter shall be sealed with a 22 gauge interlockingmolding. Molding corners shall be welded to each other and to face sheetsand ground smooth to form a rigid frame around the component.

a. Floor Anchored Overhead Braced Pilasters shall be 1-1/4" thick constructedof tw o sheets of 22 gauge stainless steel. Vertical edges shall be sealed with22 gauge interlocking molding. An inverted stirrup shall be welded within thebase of each pilaster with a jack bolt for leveling during installation andpermanent load support. "L" brackets shall be coupled to the stirrup bracketand floor for full range adjustment.b. Floor Anchored Pilasters shall be 1-1/ 4" thi ck, constructed of tw o sheets of18 gauge stainless steel. Vertical and top edges shall be sealed with 22gauge interlocking molding. An 11 gauge slotted stirrup bracket shall bewelded in the base of each pilaster. Two 3/ 8" diameter cadmium-platedstuds anchor the mounting bracket to a concrete floor.c. Ceiling Hung Pilasters shall be 1-1/4" thick, constructed of two sheets of18 gauge stainless steel. Vertical and bottom edges shall be sealed with 22gauge stainless steel interlocking molding. An 11 gauge slotted stirrupbracket shall be welded to the top of each pilaster. Two 3/8" diametercadmium-plated studs anchor the mounting bracket to overhead structuralsteel members.d Fl d C ili A h d Pil t h ll b 1 1/4" thi k t t d f

SpecificationsPOWDER COATED

Stretcher-leveled quality galvannealed steel, formed and bondedpressure with a non-toxic adhesive to a resin-impregnated, deadening honeycomb core. Hybrid resin powder w hich is electrost

charged, is sprayed onto the surface then heated fused in a curininto a smooth coating.


Doors and panels shall be 1" t hick, constructed of tw o sheets of 22steel. The perimeter shall be sealed with a 22 gauge interlocking mMolding corners shall be welded to each other and to face sheeground smooth to form a ri gid frame around the component.

a. Floor Anchored Overhead Braced Pilasters shall be 1-14" thick consof tw o sheets of 22 gauge steel. Vertical edges shall be sealed wgauge interlocking molding. An inverted stirrup shall be welded witbase of each pilaster with a jack bolt for leveling during installatipermanent load support. "L" brackets shall be coupled to the bracket and fl oor for full range adjustment.b. Floor Anchored Pilasters shall be 1-14" thick, constructed of two sh18 gauge steel. Vertical edges shall be sealed with 22 gauge intermolding. The top of each pilaster shall be sealed with 22 interlocking molding. A 11 gauge slotted sti rrup bracket shall be wethe base of each pilaster. Two 38" diameter cadmium-plated self anstuds anchor the mounting bracket to a concrete floor.c. Ceiling Hung Pilasters shall be 1-14" thick, constructed of two sh18 gauge steel. Vertical and bottom edges shall be sealed with 22interlocking molding. A 11 gauge slotted stirrup bracket shall be to the top of each pilaster. Two 38" diameter studs anchor the mobracket to overhead structural steel members.d Fl d C ili A h d Pil t h ll b 1 1 " thi k t

8/14/2019 10 21 13/GLO BuyLine 0081

12/12

Global Privacy and Urinal

Screens are available in

three, easy to maintainmounting configurations and

are offered in six materials:

polymer, plastic laminate,

phenolic-black core,

phenolic-color-thru, stainless

steel and powder coated.

Construction styles include

wall hung, floor anchoredand post-to-ceiling screens.

Wall Hung Screens

Standard sizes:

24" x 42", 18" x 42", 12" x 42".

Floor Anchored Screens

6" wide pil asters,

58" high panels by depth

required.

Post-to-Ceiling Screens

Post 1-3/4" sq. x 10' satin

finish aluminum.

Global Privacy and Urinal Screens

Documents

10 21 13/GLO BuyLine 0081