10-Port Industrial Gigabit PoE+ DIN-Rail SwitchTI-PG102 (v1.0R)

TRENDnet’s 10-Port Industrial Gigabit PoE+ DIN-Rail Switch, model TI-PG102, has eight gigabit PoE+ ports with a 240 W PoE power budget, plus twogigabit RJ-45 / SFP shared ports. Users are able to connect eight PoE+ devices to the switch, while still providing two gigabit ports for additional networkconnections. The switch is equipped with an IP30 rated metal enclosure, designed to withstand a high degree of vibration and shock, while operatingwithin a wide temperature range of -40° – 75°C (-40° – 167°F) for industrial environments.

• 8 x Gigabit PoE+ ports• 2 x Gigabit RJ-45 / SFP shared ports• 240 W PoE power budget• 20 Gbps switching capacity• Hardened IP30 rated metal switch• Includes DIN-rail and wall mounts• Operating temperature range of -40° – 75°C (-40° – 167°F)• Dual redundant power inputs with overload current protection• Alarm output triggered by power failure• Power supply sold separately (models: TI-S24048 / 48VDC3000)

TI-PG102

PoE PowerA 240 W PoE+ power budget supplies up toeight Power over Ethernet devices with PoE+power.

Fault ToleranceFeatures dual redundant power inputs withoutput alarm relay.

Industrial Hardened DesignEquipped with a rugged IP30 rated housing,designed to withstand a high degree ofvibration, shock, and operate within a widetemperature range of -40 – 75°C (-40 –167°F).

Networking Solution

TI-PG102

Full PoE+ Power BudgetSupplies up to 30 W of PoE / PoE+ power per portwith a 240 W PoE power budget

Network Ports8 Gigabit PoE+ ports plus 2 Gigabit RJ-45 / SFPshared ports

DIN-Rail / Wall MountsIP30 rated metal enclosure with included DIN-rail andwall mount hardware

Switching Capacity20 Gbps switching capacity

Redundant PowerDual redundant power inputs with overload currentprotection (power supply sold separately models: TI-S24048 / 48VDC3000)

Alarm RelayAlarm relay triggered by power failure of primary and /or redundant power

Jumbo FrameSends larger packets, or Jumbo Frames (up to 10KB), for increased performance

Extreme TemperaturesIndustrial switch is rated for an operating temperaturerange of -40 – 75°C (-40 – 167°F)

Shock and Vibration ResistantRated for shock (EN 60068-2-27), freefall (EN60068-2-32), and vibration (EN 60068-2-6)

Grounding PointGrounding point protects equipment from externalelectrical surges

TI-PG102

SpecificationsStandards

• IEEE 802.3

• IEEE 802.3u

• IEEE 802.3ab

• IEEE 802.3z

• IEEE 802.3x

• IEEE 802.3af

• IEEE 802.3at

Device Interface

• 8 x Gigabit PoE+ ports

• 2 x Gigabit Ethernet ports

• 2 x Shared SFP slots

• 6-pin removable terminal block

• LED indicators

• DIN-Rail mount

• Wall mount

• Grounding point

Data Transfer Rate

• Ethernet: 10 Mbps (half duplex), 20 Mbps (fullduplex)

• Fast Ethernet: 100 Mbps (half duplex), 200 Mbps(full duplex)

• Gigabit: 2000 Mbps (full duplex)

Performance

• Data RAM Buffer: 2048 KB

• Switching Fabric: 20 Gbps

• MAC Address Table: 16 K entries

• Forwarding rate: 14.8 Mpps (64-byte packet size)

Special Features

• Hardened components rated for extremetemperatures

• Dual redundant power inputs

• Auto-Negotiation

• Auto store and forward architecture

• Automatic address learning and address aging

• ESD 6 KV protection

Power

• Input: 48 - 56 V DC

• Compatible power supply: TI-S24048 (soldseparately)

• Consumption: 5.67 W max. (without PD)

PoE

• Per port up to 30 W

• PoE budget: 240 Watts

Terminal Block

• Redundant power inputs, alarm relay contact, 6 pin

• Wire range: 0.34 mm^2 to 2.5 mm^2

• Solid wire (AWG): 12-24 / 14-22

• Stranded wire (AWG): 12-24 / 14-22

• Torque: 5 lb. – In / 0.5 Nm / 0.56 Nm

• Wire strip length: 7-8 mm

Alarm Relay Contact

• Relay outputs with current carrying capacity of 1 A,24 V DC

• Open circuit mode when two power sources areconnected

• Short circuit mode when only one power source isconnected

MTBF

• 510,400 hours

Housing

• IP30 metal case

• DIN-rail mount

• Wall mount

• Grounding point

• ESD 6 KV protection

Operating Temperature

• - 40 to 75 °C (-40 to 167 °F)

Operating Humidity

• Max. 95 % non-condensing

Dimensions

• 155 x 120 x 48 mm (6.1 x 4.7 x 1.9 in.)

Weight

• 445 g (1 lb)

Certifications

• CE

• FCC

• Shock (EN 60068-2-27)

• Freefall (EN 60068-2-32)

• Vibration (EN 60068-2-6)

Warranty

• Limited Lifetime Warranty*

Package Contents

• TI-PG102

• Quick Installation Guide

• Removable terminal block

• DIN-rail and wall mount kit

Updated: 2/28/2017

TI-PG102

20675 Manhattan Place • Torrance • CA 90501 • USA • T: 1-888-326-6061 • F: 1-310-961-5511 • sales@trendnet.com • www.TRENDnet.comTRENDnet is a registered trademark. Other Brands and product names are trademarks of their respective holders. Information provided in this document pertain to TRENDnet products and is subject to change at any time, without notice. For the mostrecent product information please visit http://www.trendnet.com. Copyright © TRENDnet. All Rights Reserved.

*TRENDnet offers a limited lifetime warranty for all of its metal-enclosed network switches that have been purchased in the United States/Canada on or after 1/1/2015. Cooling fan and internal power supply carry a one-year warranty.