PART 1: WHAT REPLACEMENT WINDOWS ARE NOT

Human nature being what it is, most homeowners don’t bother thinking about replacement windows until the moment their windows fail. That’s okay. What isn’t okay is signing up for a window replacement immediately and just going along with whatever the contractor says.

As a homeowner, it’s important that you know exactly where your home improvement dollars are going. You need to know the basics of window replacement so you can make informed decisions when the time to make the upgrade comes.

Let’s begin with a few facts about replacement windows that need to be straightened out:

Fact #1: They don’t always replace the entire window.

This one is a common misconception. While window replacement does involve swapping an old window for a “new” one (see Fact #2), a replacement unit doesn’t always include the frame.

Three main types of replacement windows exist: full-frame units, sash kits and insert replacements. Only the first type has a head jamb, side jambs and sill.

Insert replacements are meant to be installed within the existing window frame. They have a ready-to-install secondary frame and are smaller than new construction windows. Sash kits are the most basic type of replacement window and only include new movable parts such sashes and jamb liners.

PART 1: WHAT REPLACEMENT WINDOWS ARE NOT

Fact #2: They aren’t new construction windows.

New construction windows are the windows you see on new houses and additions. They come in standard sizes and are often more affordable than replacement units. Installation costs more than make up the difference, however, because installation affects interior woodwork, siding, trim and drywall.

Replacement windows, on the other hand, are available in custom sizes and are sometimes made by special order through certified replacement window installers. While the unit itself can cost more than a new construction window, installation is much cheaper because it doesn’t involve a lot of carpentry.

Fact #3: They aren’t an energy efficiency cure-all.

Having all your windows replaced because your energy bills are skyrocketing isn’t always a smart idea. If anything, a measure this extreme should only be a last resort. Keep in mind that your home’s overall energy efficiency depends on more than just the state of your windows.

If you suspect that your windows are the culprit, start by checking their seals for air leaks. If the windows themselves are in good shape, weatherstripping or caulk may do the job. To make sure you get the right solution to your energy efficiency problem, ask a trusted window contractor to inspect your windows and check for signs of damage.

PART 2: WHAT REPLACEMENT WINDOWS CAN OFFER

Window replacement doesn’t come cheap. Here in Minnesota (West North Central), a midrange window replacement project averages out at $9,992 for vinyl replacement units and $10,919 for wood. But most homeowners find that the cost is nowhere near unreasonable, as replacement windows have a lot of benefits to offer.

Below are some of the things that make replacement windows worth every penny:

Fact #4: They offer better energy efficiency.

Many homeowners replace their windows because they want to reduce their heating and/or cooling expenses. They’re right to do so. According to the Department of Energy, energy-efficient replacement windows can help the average household save up to 2,660 kilowatt-hours per year.

2,660 kWh is enough energy to power:

and lowering your household’s energy consumption by 2,660 kWh/yr saves as much in greenhouse gas emissions as:

http://www.energystar.gov/ia/partners/manuf_res/downloads/PartnerResourceGuide-LowRes.pdf

PART 2: WHAT REPLACEMENT WINDOWS CAN OFFER

Fact #5: They offer good value for money.

While you can easily burn through ten grand on window replacement, the recoup rates and yearly savings on your energy bills make the project worth the money. Replacement windows retain up to 62% of their value upon resale—higher than a family room addition or bathroom remodel.

And according to ENERGY STAR®:

Fact #6: They offer better protection against the elements.

Replacement windows eliminate problems like leaks, cold drafts and condensation—problems that are ubiquitous with old and failing windows. Units that have insulated and/or low-e glazing and low-conductivity components also offer better protection against unwanted heat loss or gain.

Most replacement windows on the market today can even reduce the amount of ultraviolet light that enters your home. This helps keep carpets, drapes, artwork and furniture from fading and protects them from premature deterioration.

Fact #7: They offer comfort and peace of mind.

Insulated windows help minimize exterior noise, which increases indoor comfort. Replacement windows also take a load off of homeowners’ minds because unlike older windows, they don’t need semi-seasonal touch-ups and repairs. Finally, the best replacement window manufacturers offer solid warranties that will protect your investment for years.

Choosing replacement windows that best match your home and energy efficiency goals isn’t an exact science, but there are three basic considerations you’ll want to keep in mind:

Fact #8: The type of glazing matters a lot.

Glazing is the window component that has the biggest impact on energy efficiency. The rule of thumb when choosing glazing is to keep an eye out for these features:

Fact #9: The frame material matters, too.

Each frame material has its own pros and cons. Some look more high-end, some are easier to maintain, some are good at resisting extreme temperature variations. You’ll need to ask yourself what your priorities are and decide accordingly.

Multiple glazingTriple- or double-pane windows generally insulate better than single-pane windows.

Gas fill Windows that have argon, krypton, or xenon sealed in their glazing cavities are better at resisting heat transfer than windows that contain air.

Low-e coating

Glazings that have low-e coatings help block solar heat gain and provide excellent protection against UV rays.

PART 3: HOW TO CHOOSE THE RIGHT REPLACEMENT WINDOW FOR YOUR HOME

PART 3: HOW TO CHOOSE THE RIGHT REPLACEMENT WINDOW FOR YOUR HOME

In terms of energy efficiency, the following materials are excellent choices:

Fact #10: They need to be installed by a qualified professional.

Find a reliable and factory-certified window replacement contractor. Even the best window product on the market will not be able to perform well unless properly installed. Too many homeowners sign up for a window replacement without doing a background check on their contractor and end up disappointed with their customer service, workmanship or both.

For your own protection, ask at least three companies for quotes, check their credentials and reputation and hire whichever one ticks all the right boxes for you.

Home Solutions Midwest

603 1st Ave. S Albert Lea, MN

(507) 473-4106

HomeSolutionsMidwest.com