16- Rulment Radial Cu Inel Exterior Sferic

Self-aligning bearing unitsDefinition and capabilities Materials and surfaces Options for shaft fixing Fixing to the shaft / Admissible speed limits Sealing systems Relubrication system Grease Series Variants / Product index Installation / Assembly criteria Prefixes and suffixes Dimension tables Self-aligning bearing units with cast iron or pressed steel housing Self-aligning bearing units with stainless steel housing Self-aligning bearing units with thermoplastic housing 422 422 424 425 426 427 427 428 429 430 431 432 432 612 636

Self-aligning bearing unitsDefinition and capabilitiesUsed in highly diversified industrial sectors, self-aligning bearing units sustain, by their design, high loads where alignment is not guaranteed. The easy way of mounting, the nearly maintenance-free operation and the low requirements to the mating structure (compensation of misalignments) enable uncomplicated constructions in economical terms. For more than 35 years, SNR has accumulated a significant experience in the various applications in mechanical construction and technological installation sectors. With more than 25.000 possible combinations of bearing units the SNR range is one of the most extensive on the market. The bearing units are separated into housings from: - Grey cast iron - Pressed steel - Stainless steel - Thermoplastic The bearing inserts differ in their shaft locking arrangements in fixation by: - Set screws - Eccentric locking collar - Adapter sleeve - Tight fit The choice of sealing systems depends on their application. SNR inserts can be equipped with various seals to provide the best effect in almost every situation. For use in corrosive environments our inserts can be protected by a special surface treatment. As well as SNR is able to deliver inserts for inch shafts. Included in this product line is a range of covers from stainless steel which provides an additional security to the operation of the bearings. The self-aligning bearing units from grey cast iron are manufactured according the ISO norm or JIS norm (Japanese Industry Standard).

Materials and SurfacesSNR - grey cast iron housings Quality grey cast FG20 or FG25. Passivated material with painted surfaces (tone RAL 5010). SNR - Stainless steel housings Solid cast housings from stainless steel with smooth surface. Material AISI 304 (X5CrNi 1810).

SNR - Pressed steel housings Housings made from cold rolled sheet steel with zinc-plated surfaces.

SNR - Thermoplastic Housings Solid housings from thermoplastic resin (PBT). The specific resin, the design and the smooth surfaces are the crucial factors which effect a good protection against bacterial contamination.422

Bearing inserts Cast iron Pressed steel Stainless steel Thermoplastic

Single row radial contact self aligning bearing inserts from steel 100Cr6 with spherical outer ring and extended inner ring. Relubricatable (Suffix G2). Riveted two-piece sheet steel cage. Radial clearance C3 (high and low temperature inserts design T20 / T04 with C4). Sealed and protected by additional slingers (UC-EX-UK), or sealed without additional slingers (US ES CS). Series metric or inch. Fixing to the shaft by means of: - Set screws - Eccentric locking collar - Adapter sleeve - Tight fit (CS, non-relubricatable)

Single row radial contact self aligning bearing inserts from stainless steel AISI 440C with spherical outer ring and extended inner ring. Relubricatable. Cage from stainless steel. Radial clearance C3. Sealed with stainless steel washer with silicon rubber and additional stainless steel slingers (SUC). Pre-lubricated with grease for food applications (according USDA-H1). Fixing to the shaft by means of: - Set screws - Eccentric locking collar

Grease fittings Cast iron Equipped in standard with a zinc-plated grease fitting (included in packaging) Pressed steel Without relubrication facility. Stainless steel Equipped in standard with a stainless steel grease fitting (mounted). Thermoplastic Equipped in standard with a stainless steel grease fitting (mounted).

Protective caps Cast iron Pressed steel Stainless steel Open or closed protective caps made of stainless steel. Suffix open design CO or COE, closed design CC or CCE. 1 or 2 grooves are needed to mount the covers (flanged units 1; pillow blocks 2). Grooves are not manufactured as standard. Units with groove have the suffix N. Other versions Cast iron Pressed steel Stainless steel Thermoplastic Thermoplastic Open or closed protective caps made of plastic. Open design CV, closed design CF.

Open or closed protective No protective caps caps made of stainless steel. available. Suffix open design CO or COE, closed design CC or CCE. 1 or 2 grooves are needed to mount the covers (flanged units 1; pillow blocks 2). Grooves are not manufactured as standard. Units with groove have the suffix N.

Cast iron housing: Surface treatment: zinc-plating (suffix PZ) or nickel-plating (suffix PN). Special design on demand. Bearing inserts from chrome steel 100Cr6: Available ex-factory: - with 3-lip sealing system (suffix L3) - with combined sealing system axial-radial lips (suffix L4) - for high operating temperatures up to +200 C (suffix T20) - for low operating temperatures up to 40 C (suffix T04) - light-weight design of adapter sleeve version (prefix LK) - with cylindrical outer ring (series CUC-CUS-CES-CEX)

423

Self-aligning bearing unitsOptions for shaft fixing

Fixing

Features 2 set screws displaced by 120 with hexagon socket and knurled cup point

Application

Hexagon socket set screw

normal loads low to medium speeds easy to disassemble

Eccentric locking collar

Fixing using an eccentric locking collar and hexagon socket set screw

normal loads with consistent direction of rotation not suitable for reversing operation low to medium speeds higher speeds suitable for reversing operation particularly smooth running

Adapter sleeve

Tapered adapter sleeve with lock washer and groove nut Concentric shaft fixing

Fixing using shaft fit adjustment Fit adjustment

medium to high speeds normal to high loads little structural space

Floating bearing screw

Stud bolt in shaft slot, can be moved in the axial direction

low speeds and loads large degree of linear expansion (e.g., due to variable temperatures)

424

Fixing to the shaft / Admissible speed limitsOne advantage of the SNR ball bearing units are the minimum demands that this type of bearing arrangement makes on the shaft. It must neither be hardened nor ground and the surface quality too has few requirements. We recommend shaft materials having tensile strength of at least 500 N/mm2. The maximal admissible speed is depending not only on the bearing geometry but also on the tolerance of the shaft diameter, as can be seen in the following diagram.

7000 6500 6000 5500 5000 4500

Speed [min-1]

4000 3500 3000 2500 2000 1500 1000 500 0201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218

j7 Series 200 h7 Series 200 h8 Series 200 h9 Series 200 j7 Series 300 h7 Series 300 h8 Series 300 h9 Series 300

Insert size

For most applications, threaded pins provide a sufficiently secure fixing of the inner ring to the shaft. For eccentric locking collars, it is recommended to use shafts manufactured according to h6-h9 for the bearing seats. If tapered adapter sleeves are used, the shaft tolerance h9 to h11 is sufficient. If severe operating conditions are encountered, such as vibrations or shocks, a slight interference fit is preferred.

425

305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 324 326 328

Self-aligning bearing unitsSealing systems

DescriptionSeal with slinger Two-part sealing system consisting of sheet metal washer with vulcanised single lip seal of nitrile rubber (NBR) and additional sheet metal slinger.

Application

Additional mechanical protection of the seal, from contamination. Medium to high speeds

Single lip seal Seal consisting of sheet metal washer with vulcanised single lip seal of nitrile rubber (NBR)

Normal ambient conditions Medium to high speeds

Triple lip seal One-part sealing system consisting of sheet metal washer with vulcanised triple lip seal of nitrile rubber (NBR)

For strong contaminated environments Low to medium speeds

L4 sealing system Two-part sealing system consisting of an internal sheet metal washer with vulcanised lip seal (radial at inner ring) and an external sheet metal washer with a radial seal to the outer ring and an internal axial seal to the internal washer. High temperature seal Non-contacting labyrinth system consisting from two sheet metal washers.

Rough environmental conditions Medium speeds

High temperature operating up to +200 C

426

Relubrication systemGrey cast iron housings are equipped with a lubrication groove within the spherical bore. The inserts have 4 lubrication holes in the outer ring which are arranged offset. Because of the arrangement of the lubrication holes, SNR inserts can be mounted in nearly all housings with lubrication groove and then be relubricated.

A B60 45

30

90

A B A-A B-B

GreaseSNR ball bearing inserts are lubricated for life ex factory. If relubrication is necessary because of severe operating condition, a grease with the same base and consistency should be used. The greases for SNR ball bearing units have the following technical characteristics:

Range of application for grease

Grease base

Temperature range [C]

Consistency DIN 51 818 NLGI class

Speed characteristic (n dm) [min1 mm] 500 000

Viscosity at 40C [mm2/s]

Standard

Lithium soap

-20 to +120

II

100

High temperatures (e.g., T20) Low temperatures (e.g., T04)

Perfluorpolyether oil and PTFE

-40 to +260

II

300 000

400

Lithium soap

-60 to +120

III

25

427

Self-aligning bearing unitsSeries

Housings

Inserts

UC200 UCPE UCPLE UCP UCPH UCPAE UCPG UCPA

UC300

SUC200

MUC200

US200 USPE USPLE USP USPH USPAE USPG USPA USPP

ES200 ESPE ESPLE ESP ESPH ESPAE ESPG ESPA ESPP

PE PLE P Cast iron PH PAE PG PA Pressed steel PP Stainless SP steel SPA Thermoplastic GNP FE F FS FCE FC FEE Cast iron FTE FLE FL FLZ FD FAE FA PF Pressed PFL steel PFT PFE Stainless SF steel SFL GSF Thermoplastic GSFT T T+WB Cast SP iron C EHE Stainless steel ST

UCP

Pillow blocks

SUCP SUCPA GNP UCFE UCF UCFCE UCFC USFE USF USFCE USFCE USFEE USFTE USFLE USFL USFLZ USFD USFAE USFA USPF USPFL USPFT USPFE SUCF SUCFL GSF GSFT UCT UCT+WB UCSP UCC UCEHE UCT UST UST+WB USSP USC USEHE SUCT EST EST+WB ESSP ESC ESEHE ESFE ESF ESFCE ESFCE ESFEE ESFTE ESFLE ESFL ESFLZ ESFD ESFAE ESFA ESPF ESPFL ESPFT ESPFE

UCF UCFS

Flanged units

UCFLE UCFL UCFLZ

UCFL

UCFA

Take-up, cadridgeand hanger units

UCC

428

SES200

EX200 EXPE EXPLE EXP EXPH EXPAE EXPG EXPA

EX300

UK200+H UKPE+H UKPLE+H UKP+H UKPH+H UKPAE+H UKPG+H UKPA+H

UK300+H

Protection caps CC,CCE/CO,COE CC,CCE/CO,COE CC,CCE/CO,COE CC,CCE/CO,COE CC,CCE/CO,COE CC,CCE/CO,COE CC,CCE/CO,COE CC,CCE/CO,COE CC,CCE/CO,COE CF/CV

Housings

EXP

UKP+H

SESP SESPA

PE PLE P PH Cast iron PAE PG PA PP Pressed steel SP Stainless steel SPA GNP Thermoplastic FE F FS FCE FC FEE FTE Cast iron FLE FL FLZ FD FAE FA PF PFL Pressed steel PFT PFE SF Stainless steel SFL GSF Thermoplastic GSFT T T+WB Cast SP iron C EHE ST Stainless steel

EXFE EXF EXFCE EXFC

EXF EXFS

UKFE+H UKF+H UKFCE+H UKFC+H

UKF+H UKFS+H

CC,CCE/CO,COE CC,CCE/CO,COE

CC,CCE/CO,COE

EXFA

UKFA+H

CC,CCE/CO,COE

SESF SESFL

CC,CCE/CO,COE CC,CCE/CO,COE CF/CV CF/CV EXT EXT+WB EXSP EXC EXEHE UKT+H UKT+H+WB UKSP+H UKC+H UKEHE+H UKT+H CC,CCE/CO,COE CC,CCE/CO,COE CC,CCE/CO,COE

EXC

UKC+H CC,CCE/CO,COE

SEST

429

Take-up, cadridgeand hanger units

Flanged units

EXFLE EXFL EXFLZ

EXFL

UKFLE+H UKFL+H UKFLZ+H

UKFL+H

CC,CCE/CO,COE CC,CCE/CO,COE

Pillow blocks

Self-aligning bearing unitsVariants / Product index

Design (page)

UC200 (P. 566)

UC300 (P. 578)

SUC200 (P. 632)

MUC200 (P. 640)

US200 (P. 568)

ES200 (P. 570)

Design (page)

PE (P. 432)

PLE (P. 438)

P (P. 442)

PH (P. 450)

PAE (P. 454)

Design (page)

FE (P. 466)

F (P. 472)

FS (P. 494)

FCE (P. 480)

FC (P. 486)

Design (page)

FD (P. 516)

FAE (P. 518)

FA (P. 520)

PF (P. 558)

PFL (P. 560)

PFT (P. 562)

Design (page)

T (P. 524)

T+WB (P. 534)

SP (P. 538)

Installation/assembly criteriaMisalignment SNR bearings units are self-aligning, due to their spherical bearing seat. The mounted insert allows an angular movement in all directions. That is why shaft misalignment is compensated up to a certain degree. This self-alignment should only be necessary once, and must not occur permanently in operation. If bearing unit should be relubricated: = 2 If bearing unit should not be relubricated: = 5 Bearings units with protective caps: = 1430

SES200 (P. 634)

EX200 (P. 572)

EX300 (P. 580)

UK200H/LK200H (P. 574)

UK300H (P. 582)

CS200 (P. 568)

PG (P. 458)

PA (P. 462)

PP (P. 556)

SP (P. 614)

SPA (P. 618)

GNP (P. 636)

FEE (P. 492)

FTE (P. 498)

FLE (P. 500)

FL (P. 504)

FLZ (P. 512)

PFE (P. 564)

SF (P. 620)

SFL (P. 626)

GSF (P. 636)

GSFT (P. 638)

C (P. 544)

EHE (P. 552)

ST (P. 630)

Bearing units with grey cast housings Bearing units with pressed steel housings Bearing units with stainless steel housings Bearing units with thermoplastic housings

Prefixes and suffixesCC CO G2 H M N PN PZ SClosed protective cap made of stainless steel Open protective cap made of stainless steel with double lip seal SNR relubrication system Adapter sleeve for bearing inserts with tapered bore Flanged housing with threaded mounting bores (metric) Groove(s) in housing for fixing protective caps Nickel-plated housing surface Zinc-plated housing surface Material stainless steel (Prefix)

431

Self-aligning bearing units with cast iron or pressed steel housingPillow block unit PE200N1 N G B1 s A1

H2 H H1 L1 J L

D1

d

A

UCPE200

Sha ft d i

am Uni t

ete

r

Main dimensions [mm] L H 33,3 30,2 30,2 33,3 33,3 30,2 30,2 33,3 33,3 30,2 30,2 33,3 33,3 33,3 33,3 33,3 36,5 36,5 36,5 36,5 36,5 42,9 42,9 42,9 42,9 42,9 47,6 47,6 47,6 47,6 47,6 49,2 A1 19 18 18 19 19 18 18 19 19 18 18 19 19 19 19 19 21 21 21 21 21 25 25 25 25 25 27 27 27 27 27 30 A 32 30 30 32 32 30 30 32 32 30 30 32 32 32 32 32 36 36 36 36 36 40 40 40 40 40 45 45 45 45 45 48 J 97 95 95 97 97 95 95 97 97 95 95 97 97 97 97 97 103 103 103 103 103 118 118 118 118 118 126 126 126 126 126 138 N 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 14 14 14 14 14 14 14 14 14 14 14 N1 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 22 22 22 22 22 21 21 21 21 21 26 L1 40,0 38,0 38,0 40,0 40,0 38,0 38,0 40,0 40,0 38,0 38,0 40,0 40,0 40,0 40,0 40,0 39,0 39,0 39,0 39,0 39,0 47,0 47,0 47,0 47,0 47,0 49,0 49,0 49,0 49,0 49,0 53,0 H1 14,5 10,0 10,0 14,5 14,5 10,0 10,0 14,5 14,5 10,0 10,0 14,5 14,5 14,5 14,5 14,5 14,5 14,5 14,5 14,5 14,5 17,0 17,0 17,0 17,0 17,0 19,0 19,0 19,0 19,0 19,0 19,0 H2 64 57 57 64 64 57 57 64 64 57 57 64 64 64 64 64 70 70 70 70 70 82 82 82 82 82 93 93 93 93 93 99 s1 18,5 20,5 22,5 24,5 B 35 38 43 46 B1 31,0 22,0 28,6 43,5 31,0 22,0 28,6 43,5 31,0 22,0 28,6 43,5 31,0 25,0 30,9 43,5 34,0 27,0 30,9 44,3 38,1 30,0 35,7 48,3 42,9 32,0 38,9 51,1 s 12,7 6,0 6,5 17,0 12,7 6,0 6,5 17,0 12,7 6,0 6,5 17,0 12,7 7,0 7,5 17,0 14,3 7,5 7,5 17,4 15,9 8,0 9,0 18,2 17,5 8,5 9,5 18,8 -

d mm

12

UCPE201 USPE201 ESPE201 EXPE201 UCPE202 USPE202 ESPE202 EXPE202 UCPE203 USPE203 ESPE203 EXPE203 UCPE204 USPE204 ESPE204 EXPE204 UKPE205H UCPE205 USPE205 ESPE205 EXPE205 UKPE206H UCPE206 USPE206 ESPE206 EXPE206 UKPE207H UCPE207 USPE207 ESPE207 EXPE207 UKPE208H

130 125 125 130 130 125 125 130 130 125 125 130 130 130 130 130 130 130 130 130 130 158 158 158 158 158 163 163 163 163 163 179

15

17

20

25

30

35

432

* = equipped with two open protective caps for passing shafts: suffix CO or COE ** = equipped with one open and one closed protectice cap for shaft ends: suffix CC or CCE

B1 s A1

B1 s A1

B1 s A1 s1 A1 Z

D1

d

D2

d

D2

d

D2

B

d

d

Dz

A

A

A

A

A

USPE200

ESPE200

EXPE200

UKPE200H

UCPE200CO(CC)

ctiv e Clo sed cap pro ** tec tive Dyn am ic l oad rati ng Sta tic loa d ra ting We igh t

ins

ert

Ope capn prot e *

Hou

Main dimensions [mm] D1 29,0 24,6 29,0 24,6 29,0 24,6 29,0 29,0 34,0 34,0 40,3 40,3 48,0 48,0 D2 28,6 33,3 28,6 33,3 28,6 33,3 33,3 33,3 38,0 38,1 38,1 45,0 44,5 44,5 52,0 55,6 55,6 58,0 G R1/8" M6x1 M6x1 R1/8" R1/8" M6x1 M6x1 R1/8" R1/8" M6x1 M6x1 R1/8" R1/8" R1/8" R1/8" R1/8" R1/8" R1/8" R1/8" R1/8" R1/8" R1/8" R1/8" R1/8" R1/8" R1/8" R1/8" R1/8" R1/8" R1/8" R1/8" R1/8" Z 44,6 40,6 54,0 63,0 44,6 40,6 54,0 63,0 44,6 40,6 54,0 63,0 44,6 44,6 63,0 63,0 47,8 47,8 47,8 65,0 65,0 52,8 52,8 52,8 71,0 71,0 57,4 57,4 57,4 76,0 76,0 66,8 Dz 54,0 46,0 46,0 54,0 54,0 46,0 46,0 54,0 54,0 46,0 46,0 54,0 54,0 54,0 54,0 54,0 60,0 60,0 60,0 60,0 60,0 70,0 70,0 70,0 70,0 70,0 80,0 80,0 80,0 80,0 80,0 88,0

Bea

Cr [kN] PE204 PE203 PE203 PE204 PE204 PE203 PE203 PE204 PE204 PE203 PE203 PE204 PE204 PE204 PE204 PE204 PE205 PE205 PE205 PE205 PE205 PE206 PE206 PE206 PE206 PE206 PE207 PE207 PE207 PE207 PE207 PE208 UC201G2 US201G2 ES201G2 EX201G2 UC202G2 US202G2 ES202G2 EX202G2 UC203G2 US203G2 ES203G2 EX203G2 UC204G2 US204G2 ES204G2 EX204G2 UK205G2H UC205G2 US205G2 ES205G2 EX205G2 UK206G2H UC206G2 US206G2 ES206G2 EX206G2 UK207G2H UC207G2 US207G2 ES207G2 EX207G2 UK208G2H CO CO COE COE CO CO COE COE CO CO COE COE CO CO COE COE CO CO CO COE COE CO CO CO COE COE CO CO CO COE COE CO CC CC CCE CCE CC CC CCE CCE CC CC CCE CCE CC CC CCE CCE CC CC CC CCE CCE CC CC CC CCE CCE CC CC CC CCE CCE CC 12,80 9,55 9,55 12,80 12,80 9,55 9,55 12,80 12,80 9,55 9,55 12,80 12,80 12,80 12,80 12,80 14,00 14,00 14,00 14,00 14,00 19,50 19,50 19,50 19,50 19,50 25,70 25,70 25,70 25,70 25,70 29,60

C0r [kN] 6,65 4,78 4,78 6,65 6,65 4,78 4,78 6,65 6,65 4,78 4,78 6,65 6,65 6,65 6,65 6,65 7,88 7,88 7,88 7,88 7,88 11,20 11,20 11,20 11,20 11,20 15,20 15,20 15,20 15,20 15,20 18,20

kg 0,5 0,4 0,5 0,6 0,5 0,4 0,5 0,6 0,5 0,4 0,5 0,6 0,5 0,5 0,5 0,6 0,8 0,7 0,7 0,7 0,8 1,2 1,1 1,1 1,1 1,2 1,6 1,5 1,5 1,6 1,7 1,9

433

Sha dia ft me ted mm

g

ring

sin

12

15

17

20

25

30

35

r


H2 H H1 L1 J L

D1

d

A

UCPE200

Sha ft d i

am Uni t

ete

r

Main dimensions [mm] L H 49,2 49,2 49,2 49,2 54,0 54,0 54,0 54,0 54,0 57,2 57,2 57,2 57,2 57,2 63,5 63,5 63,5 63,5 63,5 69,9 69,9 69,9 69,9 79,4 79,4 79,4 82,5 79,4 79,4 89,0 A1 30 30 30 30 32 32 32 32 32 34 34 34 34 34 35 35 35 35 35 42 42 42 42 44 44 44 48 44 44 55 A 48 48 48 48 48 48 48 48 48 54 54 54 54 54 60 60 60 60 60 60 60 60 60 65 65 65 66 65 65 78 J 138 138 138 138 150 150 150 150 150 158 158 158 158 158 176 176 176 176 176 190 190 190 190 203 203 203 210 203 203 232 N 14 14 14 14 14 14 14 14 14 18 18 18 18 18 18 18 18 18 18 18 18 18 18 22 22 22 22 22 22 26 N1 26 26 26 26 29 29 29 29 29 23 23 23 23 23 30 30 30 30 30 28 28 28 28 28 28 28 30 28 28 34 L1 53,0 53,0 53,0 53,0 54,5 54,5 54,5 54,5 54,5 61,0 61,0 61,0 61,0 61,0 68,0 68,0 68,0 68,0 68,0 71,0 71,0 71,0 71,0 77,0 77,0 77,0 78,0 77,0 77,0 90,0 H1 19,0 19,0 19,0 19,0 21,5 21,5 21,5 21,5 21,5 21,5 21,5 21,5 21,5 21,5 22,5 22,5 22,5 22,5 22,5 25,0 25,0 25,0 25,0 27,5 H2 99 99 99 99 107 s1 26,0 B 50 55,0 59,0 65,0 73,0 78,0 B1 49,2 34,0 43,7 56,3 49,2 41,2 43,7 56,3 51,6 43,5 43,7 62,7 55,6 45,3 48,4 71,3 65,1 53,7 49,3 77,7 65,1 85,7 74,6 85,7 s 19,0 9,0 11,0 21,4 19,0 10,2 11,0 21,4 19,0 10,9 11,0 24,6 22,2 11,8 12,0 27,7 25,4 14,9 12,0 30,9 25,4 34,1 30,2 34,1 -

d mm

40

UCPE208 USPE208 ESPE208 EXPE208 UKPE209H UCPE209 USPE209 ESPE209 EXPE209 UKPE210H UCPE210 USPE210 ESPE210 EXPE210 UKPE211H UCPE211 USPE211 ESPE211 EXPE211 UCPE212 USPE212 ESPE212 EXPE212 UKPE213H UCPE213 EXPE213 UKPE215H UCPE214 EXPE214 UKPE216H

179 179 179 179 192 192 192 192 192 200 200 200 200 200 222 222 222 222 222 240 240 240 240 260 260 260 265 260 260 290

45

107,0 107,0 107,0 107,0 115,0 27,5 115,0 115,0 115,0 115,0 124,5 29,0 124,5 124,5 124,5 124,5 -

50

55

60

140,0 140,0 140,0 140,0 156,0 32,0

65

27,5 156,0 27,5 156,0 27,5 164,0 35,5 27,5 156,0 27,5 156,0 30,0 175,0 39,0

70

434


B1 s A1

B1 s A1

B1 s A1 s1 A1 Z

D1

d

D2

d

D2

d

D2

B

d

d

Dz

A

A

A

A

A

USPE200

ESPE200

EXPE200

UKPE200H

UCPE200CO(CC)

ctiv e Clo sed cap pro ** tec tive Dyn am ic lo ad rati ng Sta tic loa d ra ting We igh t

ins ert

Ope capn prot e *

Bea ring

g

Main dimensions [mm] D1 53,0 53,0 57,2 57,2 61,8 61,8 69,0 69,0 74,9 74,9 82,0 86,5 D2 60,3 60,3 65,0 63,5 63,5 70,0 69,9 69,9 75,0 76,2 76,2 84,2 84,2 85,0 86,0 98,0 96,8 105,0 G R1/8" R1/8" R1/8" R1/8" R1/8" R1/8" R1/8" R1/8" R1/8" R1/8" R1/8" R1/8" R1/8" R1/8" R1/8" Z 66,8 66,8 79,0 79,0 67,8 Dz 88,0 88,0 88,0 88,0 95,0

Cr [kN] PE208 PE208 PE208 PE208 PE209 PE209 PE209 PE209 PE209 PE210 PE210 PE210 PE210 PE210 PE211 PE211 PE211 PE211 PE211 PE212 PE212 PE212 PE212 PE213 PE213 PE213 PE215 PE214 PE214 PE216 UC208G2 US208G2 ES208G2 EX208G2 UK209G2H UC209G2 US209G2 ES209G2 EX209G2 UK210G2H UC210G2 US210G2 ES210G2 EX210G2 UK211G2H UC211G2 US211G2 ES211G2 EX211G2 UC212G2 US212G2 ES212G2 EX212G2 UK213G2H UC213G2 EX213G2 UK215G2H UC214G2 EX214G2 UK216G2H CO CO COE COE CO CO CO COE COE CO CO CO COE COE CO CO CO COE COE CO CO COE COE CO CO COE CC CC CCE CCE CC CC CC CCE CCE CC CC CC CCE CCE CC CC CC CCE CCE CC CC CCE CCE CC CC CCE 29,60 29,60 29,60 29,60 31,85 31,85 31,85 31,85 31,85 35,10 35,10 35,10 35,10 35,10 43,55 43,55 43,55 43,55 43,55 52,50 52,50 52,50 52,50 57,20 57,20 57,20 66,00 62,00 62,00 72,50

C0r [kN] 18,20 18,20 18,20 18,20 20,80 20,80 20,80 20,80 20,80 23,20 23,20 23,20 23,20 23,20 29,20 29,20 29,20 29,20 29,20 32,80 32,80 32,80 32,80 40,00 40,00 40,00 49,50 45,00 45,00 54,20

kg 1,8 1,8 1,8 2,0 2,3 2,2 2,1 2,2 2,4 2,9 2,7 2,7 2,7 2,9 3,5 3,4 3,4 3,2 3,7 4,8 4,6 4,5 5,1 7,3 6,1 6,6 6,8 6,1 6,6 9,4

67,8 95,0 67,8 95,0 82,0 95,0 82,0 95,0 74,6 100,0 74,6 74,6 90,0 90,0 75,2 100,0 100,0 100,0 100,0 110,0

R1/8" 75,2 110,0 R1/8" 75,2 110,0 R1/8" 102,0 110,0 R1/8" 102,0 110,0 R1/8" 87,8 120,0 R1/8" 87,8 120,0 R1/8" 109,0 120,0 R1/8" 109,0 120,0 R1/8" 88,8 132,0 R1/8" 88,8 132,0 R1/8" 118,0 132,0 R1/8" R1/8" R1/8" R1/8" -

435


Hou

sin

40

45

50

55

60

65

70

r


H2 H H1 L1 J L

D1

d

A

UCPE200

Sha ft d i

am Uni t

ete

r

Main dimensions [mm] L H 82,5 82,5 89,0 89,0 101,6 101,6 101,6 A1 48 48 55 55 55 55 55 A 66 66 78 78 85 85 85 J 210 210 232 232 268 268 268 N 22 22 26 26 27 27 27 N1 30 30 34 34 35 35 35 L1 78,0 78,0 90,0 90,0 99,0 99,0 99,0 H1 H2 s1 B 86,0 B1 77,8 92,1 82,6 95,2 96,0 72,5 s 33,3 37,3 33,3 37,3 39,7 24,5

d mm

75 80

UCPE215 EXPE215 UCPE216 EXPE216 UKPE218H UCPE218 EXPE218

265 265 290 290 330 330 330

27,5 164,0 27,5 164,0

30,0 175,0 30,0 175,0 35,0 200,0 42,0 35,0 200,0 35,0 200,0 -

90

436


B1 s A1

B1 s A1

B1 s A1 s1 A1 Z

D1

d

D2

d

D2

d

D2

B

d

d

Dz

A

A

A

A

A

USPE200

ESPE200

EXPE200

UKPE200H

UCPE200CO(CC)


ins ert

Ope capn prot e *

g

Main dimensions [mm] D1 91,5 98,0 111,0 D2 102,0 110,0 120,0 120,0 G R1/8" R1/8" R1/8" R1/8" R1/8" R1/8" R1/8" Z Dz -

Cr [kN] PE215 PE215 PE216 PE216 PE218 PE218 PE218 UC215G2 EX215G2 UC216G2 EX216G2 UK218G2H UC218G2 EX218G2 66,00 66,00 72,50 72,50 96,00 96,00 96,00

C0r [kN] 49,50 49,50 54,20 54,20 71,50 71,50 71,50

kg 6,9 7,5 9,0 9,3 13,6 13,3 13,8

437


Bea ring

Hou

sin

75 80

90

r

Self-aligning bearing units with cast iron or pressed steel housingPillow block unit PLE200N1 N G A1 B1 s

H2 H H1 J L

D1

d

A

UCPLE200

Sha ft d i

am Uni t

ete

r

Main dimensions [mm] L H 31,8 27,0 27,0 31,8 31,8 27,0 27,0 31,8 31,8 27,0 27,0 31,8 31,8 31,8 31,8 31,8 33,3 33,3 33,3 33,3 33,3 39,7 39,7 39,7 39,7 39,7 46,2 46,2 46,2 46,2 46,2 49,2 A1 22,5 20,5 20,5 22,5 22,5 20,5 20,5 22,5 22,5 20,5 20,5 22,5 22,5 22,5 22,5 22,5 24,5 24,5 24,5 24,5 24,5 27,5 27,5 27,5 27,5 27,5 30,5 30,5 30,5 30,5 30,5 34,5 A 32,0 30,0 30,0 32,0 32,0 30,0 30,0 32,0 32,0 30,0 30,0 32,0 32,0 32,0 32,0 32,0 36,5 36,5 36,5 36,5 36,5 41,5 41,5 41,5 41,5 41,5 44,5 44,5 44,5 44,5 44,5 51,0 J 94,5 88,5 88,5 94,5 94,5 88,5 88,5 94,5 94,5 88,5 88,5 94,5 94,5 94,5 94,5 94,5 104,2 104,2 104,2 104,2 104,2 119,0 119,0 119,0 119,0 119,0 129,0 129,0 129,0 129,0 129,0 137,5 N 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 14 14 14 14 14 14 14 14 14 14 14 N1 17,0 14,0 14,0 17,0 17,0 14,0 14,0 17,0 17,0 14,0 14,0 17,0 17,0 17,0 17,0 17,0 17,0 17,0 17,0 17,0 17,0 24,5 24,5 24,5 24,5 24,5 21,5 21,5 21,5 21,5 21,5 24,5 H1 12,5 11,0 11,0 12,5 12,5 11,0 11,0 12,5 12,5 11,0 11,0 12,5 12,5 12,5 12,5 12,5 12,8 12,8 12,8 12,8 12,8 14,5 14,5 14,5 14,5 14,5 16,0 16,0 16,0 16,0 16,0 18,5 H2 63,7 54,0 54,0 63,7 63,7 54,0 54,0 63,7 63,7 54,0 54,0 63,7 63,7 63,7 63,7 63,7 67,8 67,8 67,8 67,8 67,8 79,5 79,5 79,5 79,5 79,5 91,5 91,5 91,5 91,5 91,5 98,5 s1 B B1 31,0 22,0 28,6 43,5 31,0 22,0 28,6 43,5 31,0 22,0 28,6 43,5 31,0 25,0 30,9 43,5 34,0 27,0 30,9 44,3 38,1 30,0 35,7 48,3 42,9 32,0 38,9 51,1 s 12,7 6,0 6,5 17,0 12,7 6,0 6,5 17,0 12,7 6,0 6,5 17,0 12,7 7,0 7,5 17,0 14,3 7,5 7,5 17,4 15,9 8,0 9,0 18,2 17,5 8,5 9,5 18,8 -

d mm

12

UCPLE201 USPLE201 ESPLE201 EXPLE201 UCPLE202 USPLE202 ESPLE202 EXPLE202 UCPLE203 USPLE203 ESPLE203 EXPLE203 UCPLE204 USPLE204 ESPLE204 EXPLE204 UKPLE205H UCPLE205 USPLE205 ESPLE205 EXPLE205 UKPLE206H UCPLE206 USPLE206 ESPLE206 EXPLE206 UKPLE207H UCPLE207 USPLE207 ESPLE207 EXPLE207 UKPLE208H

126,5 119,0 119,0 126,5 126,5 119,0 119,0 126,5 126,5 119,0 119,0 126,5 126,5 126,5 126,5 126,5 139,0 139,0 139,0 139,0 139,0 161,5 161,5 161,5 161,5 161,5 166,0 166,0 166,0 166,0 166,0 180,5

15

17

20

18,5 35,0 20,5 38,0 22,5 43,0 24,5 46,0

25

30

35

438


B1 s A1

B1 s A1

B1 s A1 s1 A1 Z

D1

d

D2

d

D2

d

D2

B

d

d

Dz

A

A

A

A

A

USPLE200

ESPLE200

EXPLE200

UKPLE200H

UCPLE200CO(CC)


ins

ert

Ope capn prot e *

Main dimensions [mm] D1 29,0 24,6 29,0 24,6 29,0 24,6 29,0 29,0 34,0 34,0 40,3 40,3 48,0 48,0 D2 28,6 33,3 28,6 33,3 28,6 33,3 33,3 33,3 38,0 38,1 38,1 45,0 44,5 44,5 52,0 55,6 55,6 58,0 G M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 Z 44,6 40,6 54,0 63,0 44,6 40,6 54,0 63,0 44,6 40,6 54,0 63,0 44,6 44,6 63,0 63,0 47,8 47,8 47,8 65,0 65,0 52,8 52,8 52,8 71,0 71,0 57,4 57,4 57,4 76,0 76,0 66,8 Dz 54,0 46,0 46,0 54,0 54,0 46,0 46,0 54,0 54,0 46,0 46,0 54,0 54,0 54,0 54,0 54,0 60,0 60,0 60,0 60,0 60,0 70,0 70,0 70,0 70,0 70,0 80,0 80,0 80,0 80,0 80,0 88,0

Hou

Cr [kN] PLE204 PLE203 PLE203 PLE204 PLE204 PLE203 PLE203 PLE204 PLE204 PLE203 PLE203 PLE204 PLE204 PLE204 PLE204 PLE204 PLE205 PLE205 PLE205 PLE205 PLE205 PLE206 PLE206 PLE206 PLE206 PLE206 PLE207 PLE207 PLE207 PLE207 PLE207 PLE208 UC201G2 US201G2 ES201G2 EX201G2 UC202G2 US202G2 ES202G2 EX202G2 UC203G2 US203G2 ES203G2 EX203G2 UC204G2 US204G2 ES204G2 EX204G2 UK205G2H UC205G2 US205G2 ES205G2 EX205G2 UK206G2H UC206G2 US206G2 ES206G2 EX206G2 UK207G2H UC207G2 US207G2 ES207G2 EX207G2 UK208G2H CO CO COE COE CO CO COE COE CO CO COE COE CO CO COE COE CO CO CO COE COE CO CO CO COE COE CO CO CO COE COE CO CC CC CCE CCE CC CC CCE CCE CC CC CCE CCE CC CC CCE CCE CC CC CC CCE CCE CC CC CC CCE CCE CC CC CC CCE CCE CC 12,80 9,55 9,55 12,80 12,80 9,55 9,55 12,80 12,80 9,55 9,55 12,80 12,80 12,80 12,80 12,80 14,00 14,00 14,00 14,00 14,00 19,50 19,50 19,50 19,50 19,50 25,70 25,70 25,70 25,70 25,70 29,60

C0r [kN] 6,65 4,78 4,78 6,65 6,65 4,78 4,78 6,65 6,65 4,78 4,78 6,65 6,65 6,65 6,65 6,65 7,88 7,88 7,88 7,88 7,88 11,20 11,20 11,20 11,20 11,20 15,20 15,20 15,20 15,20 15,20 18,20

kg 0,5 0,4 0,5 0,6 0,5 0,4 0,5 0,6 0,5 0,4 0,5 0,6 0,5 0,5 0,5 0,6 0,8 0,7 0,7 0,7 0,8 1,2 1,1 1,1 1,1 1,2 1,6 1,5 1,5 1,6 1,7 1,9

439


g

sin

Bea r

ing

12

15

17

20

25

30

35

r

Self-aligning bearing units with cast iron or pressed steel housingPillow block unit PLE200N1 N G A1 B1 s

H2 H H1 J L

D1

d

A

Sha ft d i

am Uni t

ete

r

Main dimensions [mm] L H 49,2 49,2 49,2 49,2 52,4 52,4 52,4 52,4 52,4 55,6 55,6 55,6 55,6 55,6 61,3 61,3 61,3 61,3 61,3 68,3 68,3 68,3 68,3 68,3 A1 34,5 34,5 34,5 34,5 35,0 35,0 35,0 35,0 35,0 36,0 36,0 36,0 36,0 36,0 39,5 39,5 39,5 39,5 39,5 50,8 50,8 50,8 50,8 50,8 A 51,0 51,0 51,0 51,0 54,0 54,0 54,0 54,0 54,0 55,0 55,0 55,0 55,0 55,0 60,0 60,0 60,0 60,0 60,0 79,4 79,4 79,4 79,4 79,4 J 137,5 137,5 137,5 137,5 151,5 151,5 151,5 151,5 151,5 164,0 164,0 164,0 164,0 164,0 170,5 170,5 170,5 170,5 170,5 193,7 193,7 193,7 193,7 193,7 N 14 14 14 14 14 14 14 14 14 14 14 14 14 14 18 18 18 18 18 18 18 18 18 18 N1 24,5 24,5 24,5 24,5 24,0 24,0 24,0 24,0 24,0 27,0 27,0 27,0 27,0 27,0 26,0 26,0 26,0 26,0 26,0 29,1 29,1 29,1 29,1 29,1 H1 18,5 18,5 18,5 18,5 18,4 18,4 18,4 18,4 18,4 19,3 19,3 19,3 19,3 19,3 23,2 23,2 23,2 23,2 23,2 28,6 28,6 28,6 28,6 28,6 H2 98,5 98,5 98,5 98,5 106,4 106,4 106,4 106,4 106,4 114,0 114,0 114,0 114,0 114,0 128,0 128,0 128,0 128,0 128,0 138,1 138,1 138,1 138,1 138,1 s1 B B1 49,2 34,0 43,7 56,3 49,2 41,2 43,7 56,3 51,6 43,5 43,7 62,7 55,6 45,3 48,4 71,3 65,1 53,7 49,3 77,7 s 19,0 9,0 11,0 21,4 19,0 10,2 11,0 21,4 19,0 10,9 11,0 24,6 22,2 11,8 12,0 27,7 25,4 14,9 12,0 30,9

d mm

40

UCPLE208 USPLE208 ESPLE208 EXPLE208 UKPLE209H UCPLE209 USPLE209 ESPLE209 EXPLE209 UKPLE210H UCPLE210 USPLE210 ESPLE210 EXPLE210 UKPLE211H UCPLE211 USPLE211 ESPLE211 EXPLE211 UKPLE212H UCPLE212 USPLE212 ESPLE212 EXPLE212

180,5 180,5 180,5 180,5 197,5 197,5 197,5 197,5 197,5 214,0 214,0 214,0 214,0 214,0 219,5 219,5 219,5 219,5 219,5 245,0 245,0 245,0 245,0 245,0

26,0 50,0 27,5 55,0 29,0 59,0 31,0 62,0 -

45

50

55

60

440


B1 s A1

B1 s A1

B1 s A1 s1 A1 Z

D1

d

D2

d

D2

d

D2

B

d

d

Dz

A

A

A

A

A

USPLE200

ESPLE200

EXPLE200

UKPLE200H

UCPLE200CO(CC)


ins e

rt

Ope capn prot e *

ring

Main dimensions [mm] D1 53,0 53,0 57,2 57,2 61,8 61,8 69,0 69,0 74,9 74,9 D2 60,3 60,3 65,0 63,5 63,5 70,0 69,9 69,9 75,0 76,2 76,2 80,0 84,2 84,2 G M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 Z 66,8 66,8 79,0 79,0 67,8 Dz 88,0 88,0 88,0 88,0 95,0

Hou

Cr [kN] PLE208 PLE208 PLE208 PLE208 PLE209 PLE209 PLE209 PLE209 PLE209 PLE210 PLE210 PLE210 PLE210 PLE210 PLE211 PLE211 PLE211 PLE211 PLE211 PLE212 PLE212 PLE212 PLE212 PLE212 UC208G2 US208G2 ES208G2 EX208G2 UK209G2H UC209G2 US209G2 ES209G2 EX209G2 UK210G2H UC210G2 US210G2 ES210G2 EX210G2 UK211G2H UC211G2 US211G2 ES211G2 EX211G2 UK212G2H UC212G2 US212G2 ES212G2 EX212G2 CO CO COE COE CO CO CO COE COE CO CO CO COE COE CO CO CO COE COE CO CO CO COE COE CC CC CCE CCE CC CC CC CCE CCE CC CC CC CCE CCE CC CC CC CCE CCE CC CC CC CCE CCE 29,60 29,60 29,60 29,60 31,85 31,85 31,85 31,85 31,85 35,10 35,10 35,10 35,10 35,10 43,55 43,55 43,55 43,55 43,55 52,50 52,50 52,50 52,50 52,50

C0r [kN] 18,20 18,20 18,20 18,20 20,80 20,80 20,80 20,80 20,80 23,20 23,20 23,20 23,20 23,20 29,20 29,20 29,20 29,20 29,20 32,80 32,80 32,80 32,80 32,80

kg 1,8 1,8 1,8 2,0 2,3 2,2 2,1 2,2 2,4 2,9 2,7 2,7 2,7 2,9 3,5 3,4 3,4 3,2 3,7 4,8 4,8 4,6 4,5 5,1

67,8 95,0 67,8 95,0 82,0 95,0 82,0 95,0 74,6 100,0 74,6 74,6 90,0 90,0 75,2 100,0 100,0 100,0 100,0 110,0

M6x1 75,2 110,0 M6x1 75,2 110,0 M6x1 102,0 110,0 M6x1 102,0 110,0 M6x1 87,8 120,0 M6x1 87,8 120,0 M6x1 87,8 120,0 M6x1 109,0 120,0 M6x1 109,0 120,0

441


sin

g

Bea

40

45

50

55

60

r

Self-aligning bearing units with cast iron or pressed steel housingPillow block unit P200 P300N B1 s N1 G A1

H2 H H1 J L L1

d

D1

A

UCP200 UCP300

Sha ft d i

am Uni t

ete

r

Main dimensions [mm] L H 33,3 30,2 30,2 33,3 33,3 30,2 30,2 33,3 33,3 30,2 30,2 33,3 33,3 33,3 33,3 33,3 36,5 45,0 36,5 36,5 36,5 36,5 42,9 45,0 45,0 50,0 42,9 42,9 42,9 42,9 47,6 50,0 50,0 56,0 A1 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 26 32 26 26 26 26 30 32 32 36 30 30 30 30 31 36 36 38 A 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 45 38 38 38 38 48 45 45 50 48 48 48 48 48 50 50 56 J 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 105 132 105 105 105 105 121 132 132 140 121 121 121 121 127 140 140 160 N 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 17 13 13 13 13 17 17 17 17 17 17 17 17 17 17 17 17 N1 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 20 19 19 19 19 21 20 20 20 21 21 21 21 21 20 20 25 L1 42 42 42 42 42 42 42 42 42 42 42 42 42 42 42 42 42 54 42 42 42 42 54 54 54 54 54 54 54 54 54 54 54 60 H1 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 16 15 16 16 16 16 18 15 15 18 18 18 18 18 19 18 18 20 H2 65 62 62 65 65 62 62 65 65 62 62 65 65 65 65 65 70 85 70 70 70 70 83 85 85 95 83 83 83 83 94 95 95 106 s1 18,5 21,5 20,5 23,0 22,5 25,5 B 35,0 35,0 38,0 38,0 43,0 43,0 B1 31,0 22,0 28,6 43,5 31,0 22,0 28,6 43,5 31,0 22,0 28,6 43,5 31,0 25,0 30,9 43,5 34,0 27,0 30,9 44,3 38,0 46,8 38,1 30,0 35,7 48,3 43,0 50,0 s 12,7 6,0 6,5 17,0 12,7 6,0 6,5 17,0 12,7 6,0 6,5 17,0 12,7 7,0 7,5 17,0 14,3 7,5 7,5 17,4 15,0 16,7 15,9 8,0 9,0 18,2 17,0 17,5 -

d mm

12

UCP201 USP201 ESP201 EXP201 UCP202 USP202 ESP202 EXP202 UCP203 USP203 ESP203 EXP203 UCP204 USP204 ESP204 EXP204 UKP205H UKP305H UCP205 USP205 ESP205 EXP205 UKP206H UCP305 EXP305 UKP306H UCP206 USP206 ESP206 EXP206 UKP207H UCP306 EXP306 UKP307H

127 127 127 127 127 127 127 127 127 127 127 127 127 127 127 127 140 175 140 140 140 140 165 175 175 180 165 165 165 165 167 180 180 210

15

17

20

25

30

442


B1 s A1 s A1

B1 s

B1 s1 A1 A1 Z

d

D1

d

D2

d

D2

d

B

D2

d

Dz

A

A

A

A

A

USP200

ESP200

EXP200 EXP300

UKP200H UKP300H

UCP200CO(CC)


ins

ert

Ope capn prot e *

Main dimensions [mm] D1 29,0 24,6 29,0 24,6 29,0 24,6 29,0 29,0 34,0 34,0 35,4 40,3 40,3 44,6 D2 28,6 33,3 28,6 33,3 28,6 33,3 33,3 33,3 38,0 38,0 38,1 38,1 45,0 42,8 45,0 44,5 44,5 52,0 50,0 52,0 G M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 Z 45,0 45,0 58,4 63,4 45,0 45,0 58,4 63,4 45,0 45,0 58,4 63,4 45,0 45,0 63,4 63,4 48,0 48,0 48,0 65,2 65,2 53,0 53,0 53,0 71,2 71,2 60,0 Dz 54,0 46,0 46,0 54,0 54,0 46,0 46,0 54,0 54,0 46,0 46,0 54,0 54,0 54,0 54,0 54,0 60,0 60,0 60,0 60,0 60,0 70,0 70,0 70,0 70,0 70,0 80,0 -

Hou

Cr [kN] P204 P203 P203 P204 P204 P203 P203 P204 P204 P203 P203 P204 P204 P204 P204 P204 P205 P305 P205 P205 P205 P205 P206 P305 P305 P306 P206 P206 P206 P206 P207 P306 P306 P307 UC201G2 US201G2 ES201G2 EX201G2 UC202G2 US202G2 ES202G2 EX202G2 UC203G2 US203G2 ES203G2 EX203G2 UC204G2 US204G2 ES204G2 EX204G2 UK205G2H UK305G2H UC205G2 US205G2 ES205G2 EX205G2 UK206G2H UC305G2 EX305G2 UK306G2H UC206G2 US206G2 ES206G2 EX206G2 UK207G2H UC306G2 EX306G2 UK307G2H CO CO COE COE CO CO COE COE CO CO COE COE CO CO COE COE CO CO CO COE COE CO CO CO COE COE CO CC CC CCE CCE CC CC CCE CCE CC CC CCE CCE CC CC CCE CCE CC CC CC CCE CCE CC CC CC CCE CCE CC 12,80 9,55 9,55 12,80 12,80 9,55 9,55 12,80 12,80 9,55 9,55 12,80 12,80 12,80 12,80 12,80 14,00 22,36 14,00 14,00 14,00 14,00 19,50 22,36 22,36 27,00 19,50 19,50 19,50 19,50 25,70 27,00 27,00 33,50

C0r [kN] 6,65 4,78 4,78 6,65 6,65 4,78 4,78 6,65 6,65 4,78 4,78 6,65 6,65 6,65 6,65 6,65 7,88 11,50 7,88 7,88 7,88 7,88 11,20 11,50 11,50 15,20 11,20 11,20 11,20 11,20 15,20 15,20 15,20 19,20

kg 0,7 0,7 0,7 0,8 0,7 0,6 0,7 0,8 0,7 0,6 0,7 0,8 0,7 0,7 0,7 0,8 0,8 1,6 0,8 0,8 0,8 0,9 1,4 1,4 1,5 2,0 1,4 1,3 1,4 1,5 1,8 1,9 2,1 2,8

443


g

sin

Bea

ring

12

16

17

20

25

30

r


H2 H H1 J L L1

d

D1

A

UCP200 UCP300

Sha ft d i

am Uni t

ete

r

Main dimensions [mm] L H 47,6 47,6 47,6 47,6 49,2 56,0 56,0 60,0 49,2 49,2 49,2 49,2 54,0 60,0 60,0 67,0 54,0 54,0 54,0 54,0 57,2 67,0 67,0 75,0 57,2 57,2 57,2 57,2 63,5 75,0 75,0 80,0 63,5 63,5 A1 31 31 31 31 34 38 38 42 34 34 34 34 37 42 42 45 37 37 37 37 39 45 45 48 39 39 39 39 40 48 48 51 40 40 A 48 48 48 48 54 56 56 60 54 54 54 54 54 60 60 67 54 54 54 54 60 67 67 75 60 60 60 60 60 75 75 80 60 60 J 127 127 127 127 137 160 160 170 137 137 137 137 146 170 170 190 146 146 146 146 159 190 190 212 159 159 159 159 171 212 212 236 171 171 N 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 20 17 17 17 17 20 20 20 20 20 20 20 20 20 20 20 20 20 20 N1 21 21 21 21 23 25 25 27 23 23 23 23 23 27 27 30 23 23 23 23 25 30 30 35 25 25 25 25 25 35 35 38 25 25 L1 54 54 54 54 52 60 60 60 52 52 52 52 60 60 60 65 60 60 60 60 65 65 65 75 65 65 65 65 70 75 75 85 70 70 H1 19 19 19 19 19 20 20 22 19 19 19 19 20 22 22 24 20 20 20 20 22 24 24 27 22 22 22 22 22 27 27 30 22 22 H2 94 94 94 94 100 106 106 116 100 100 100 100 108 116 116 129 108 108 108 108 114 129 129 143 114 114 114 114 126 143 143 154 126 126 s1 24,5 27,5 26,0 30,0 27,5 32,0 29,0 34,0 B 46,0 46,0 50,0 50,0 55,0 55,0 59,0 59,0 B1 42,9 32,0 38,9 51,1 48,0 51,6 49,2 34,0 43,7 56,3 52,0 57,1 49,2 41,2 43,7 56,3 57,0 58,7 51,6 43,5 43,7 62,7 61,0 66,6 55,6 45,3 s 17,5 8,5 9,5 18,8 19,0 18,3 19,0 9,0 11,0 21,4 19,0 19,8 19,0 10,2 11,0 21,4 22,0 19,8 19,0 10,9 11,0 24,6 22,0 24,6 22,2 11,8

d mm

35

UCP207 USP207 ESP207 EXP207 UKP208H UCP307 EXP307 UKP308H UCP208 USP208 ESP208 EXP208 UKP209H UCP308 EXP308 UKP309H UCP209 USP209 ESP209 EXP209 UKP210H UCP309 EXP309 UKP310H UCP210 USP210 ESP210 EXP210 UKP211H UCP310 EXP310 UKP311H UCP211 USP211

167 167 167 167 184 210 210 220 184 184 184 184 190 220 220 245 190 190 190 190 206 245 245 275 206 206 206 206 219 275 275 310 219 219

40

45

50

55

444


B1 s A1 s A1

B1 s

B1 s1 A1 A1 Z

d

D1

d

D2

d

D2

d

B

D2

d

Dz

A

A

A

A

A

USP200

ESP200

EXP200 EXP300

UKP200H UKP300H

UCP200CO(CC)


ins

ert

Ope capn prot e *

Main dimensions [mm] D1 48,0 48,0 48,9 53,0 53,0 56,5 57,2 57,2 61,8 61,8 61,8 68,7 69,0 69,0 D2 55,6 55,6 58,0 55,0 58,0 60,3 60,3 65,0 63,5 65,0 63,5 63,5 70,0 70,0 70,0 69,9 69,9 75,0 76,2 75,0 G M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 Z 60,0 60,0 78,6 78,6 69,0 69,0 69,0 81,2 81,2 69,0 Dz 80,0 80,0 80,0 80,0 88,0 88,0 88,0 88,0 88,0 95,0 -

Hou

Cr [kN] P207 P207 P207 P207 P208 P307 P307 P308 P208 P208 P208 P208 P209 P308 P308 P309 P209 P209 P209 P209 P210 P309 P309 P310 P210 P210 P210 P210 P211 P310 P310 P311 P211 P211 UC207G2 US207G2 ES207G2 EX207G2 UK208G2H UC307G2 EX307G2 UK308G2H UC208G2 US208G2 ES208G2 EX208G2 UK209G2H UC308G2 EX308G2 UK309G2H UC209G2 US209G2 ES209G2 EX209G2 UK210G2H UC309G2 EX309G2 UK310G2H UC210G2 US210G2 ES210G2 EX210G2 UK211G2H UC310G2 EX310G2 UK311G2H UC211G2 US211G2 CO CO COE COE CO CO CO COE COE CO CO CO COE COE CO CO CO COE COE CO CO CO CC CC CCE CCE CC CC CC CCE CCE CC CC CC CCE CCE CC CC CC CCE CCE CC CC CC 25,70 25,70 25,70 25,70 29,60 33,50 33,50 40,56 29,60 29,60 29,60 29,60 31,85 40,56 40,56 53,00 31,85 31,85 31,85 31,85 35,10 53,00 53,00 62,00 35,10 35,10 35,10 35,10 43,55 62,00 62,00 71,50 43,55 43,55

C0r [kN] 15,20 15,20 15,20 15,20 18,20 19,20 19,20 24,00 18,20 18,20 18,20 18,20 20,80 24,00 24,00 31,80 20,80 20,80 20,80 20,80 23,20 31,80 31,80 37,80 23,20 23,20 23,20 23,20 29,20 37,80 37,80 44,80 29,20 29,20

kg 1,8 1,7 1,8 1,9 2,2 2,6 2,7 3,4 2,1 2,1 2,1 2,3 2,5 3,3 3,5 4,8 2,4 2,4 2,4 2,6 3,1 4,6 4,7 6,2 3,0 2,9 3,0 3,2 3,7 6,1 6,3 7,9 3,7 3,6

69,0 95,0 69,0 95,0 83,2 95,0 83,2 95,0 76,0 100,0 76,0 76,0 91,4 91,4 77,0 100,0 100,0 100,0 100,0 110,0 -

77,0 110,0 77,0 110,0

445


g

sin

Bea

ring

35

40

45

50

55

r


H2 H H1 J L L1

d

D1

A

UCP200 UCP300

Sha ft d i

am Uni t

ete

r

Main dimensions [mm] L H 63,5 63,5 69,8 80,0 80,0 85,0 69,8 69,8 69,8 69,8 76,2 85,0 85,0 90,0 A1 40 40 44 51 51 54 44 44 44 44 46 54 54 57 46 46 48 57 57 63 48 48 51 60 60 66 48 48 53 63 63 69 51 51 A 60 60 70 80 80 85 70 70 70 70 70 85 85 90 70 70 74 90 90 100 72 72 78 90 90 110 74 74 83 100 100 110 78 78 J 171 171 184 236 236 250 184 184 184 184 203 250 250 260 203 203 217 260 260 290 210 210 232 280 280 300 217 217 247 290 290 320 232 232 N 20 20 20 20 20 25 20 20 20 20 25 25 25 25 25 25 25 25 25 27 25 25 25 27 27 27 25 25 25 27 27 33 25 25 N1 25 25 25 38 38 38 25 25 25 25 29 38 38 38 29 29 31 38 38 40 31 31 31 40 40 40 31 31 31 40 40 45 31 31 L1 70 70 70 85 85 95 70 70 70 70 77 95 95 105 77 77 85 105 105 110 83 83 91 105 105 110 85 85 96 110 110 120 91 91 H1 22 22 25 30 30 32 25 25 25 25 27 32 32 33 27 27 28 33 33 35 27 27 30 35 35 40 28 28 32 35 35 40 30 30 H2 126 126 138 154 154 165 138 138 138 138 150 165 165 176 150 150 163 176 176 198 156 156 175 187 187 210 163 163 187 198 198 220 175 175 s1 31,0 36,5 32,0 38,5 35,5 42,5 39,0 44,5 40,0 48,0 B 62,0 62,0 65,0 65,0 73,0 73,0 78,0 78,0 B1 48,4 71,3 66,0 73,0 65,1 53,7 49,3 77,7 71,0 79,4 65,1 85,7 75,0 85,7 74,6 85,7 78,0 92,1 s 12,0 27,7 25,0 27,8 25,4 14,9 12,0 30,9 26,0 31,0 25,4 34,1 30,0 32,5 30,2 34,1 33,0 34,2 33,3 37,3 32,0 37,3 33,3 37,3

d mm

55

ESP211 EXP211 UKP212H UCP311 EXP311 UKP312H UCP212 USP212 ESP212 EXP212 UKP213H UCP312 EXP312 UKP313H UCP213 EXP213 UKP215H UCP313 EXP313 UKP315H UCP214 EXP214 UKP216H UCP314 EXP314 UKP316H UCP215 EXP215 UKP217H UCP315 EXP315 UKP317H UCP216 EXP216

219 219 241 310 310 330 241 241 241 241 265 330 330 340

60

65

265 76,2 265 76,2 275 82,6 340 90,0 340 90,0 380 100,0 266 79,4 266 79,4 292 88,9 360 95,0 360 95,0 400 106,0 275 82,6 275 82,6 310 95,2 380 100,0 380 100,0 420 112,0 292 292 88,9 88,9

70

75

77,8 92,1 82,0 82,0 - 100,0 82,0 82,6 95,2

80

446


B1 s A1 s A1

B1 s

B1 s1 A1 A1 Z

d

D1

d

D2

d

D2

d

B

D2

d

Dz

A

A

A

A

A

USP200

ESP200

EXP200 EXP300

UKP200H UKP300H

UCP200CO(CC)


ins

ert

Ope capn prot e *

ring

Main dimensions [mm] D1 74,9 74,9 74,9 81,0 82,0 87,5 86,5 94,0 91,5 100,5 98,0 D2 76,2 76,2 80,0 83,0 80,0 84,2 84,2 85,0 89,0 85,0 86,0 98,0 97,0 98,0 96,8 105,0 102,0 105,0 102,0 110,0 113,0 110,0 110,0 G Z Dz

Hou

Cr [kN] P211 P211 P212 P311 P311 P312 P212 P212 P212 P212 P213 P312 P312 P313 P213 P213 P215 P313 P313 P315 P214 P214 P216 P314 P314 P316 P215 P215 P217 P315 P315 P317 P216 P216 ES211G2 EX211G2 UK212G2H UC311G2 EX311G2 UK312G2H UC212G2 US212G2 ES212G2 EX212G2 UK213G2H UC312G2 EX312G2 UK313G2H UC213G2 EX213G2 UK215G2H UC313G2 EX313G2 UK315G2H UC214G2 EX214G2 UK216G2H UC314G2 EX314G2 UK316G2H UC215G2 EX215G2 UK217G2H UC315G2 EX315G2 UK317G2H UC216G2 EX216G2 COE COE CO CO CO COE COE CO CO COE CCE CCE CC CC CC CCE CCE CC CC CCE 43,55 43,55 52,50 71,50 71,50 81,60 52,50 52,50 52,50 52,50 57,20 81,60 81,60 93,86 57,20 57,20 66,00 93,86 93,86 113,36 62,00 62,00 72,50 104,26 104,26 122,85 66,00 66,00 83,20 113,36 113,36 132,60 72,50 72,50

C0r [kN] 29,20 29,20 32,80 44,80 44,80 51,80 32,80 32,80 32,80 32,80 40,00 51,80 51,80 60,50 40,00 40,00 49,50 60,50 60,50 76,80 45,00 45,00 54,20 68,00 68,00 86,50 49,50 49,50 63,80 76,80 76,80 96,50 54,20 54,20

kg 3,4 3,9 5,0 7,6 8,0 9,5 5,0 4,8 4,7 5,4 6,1 9,5 9,8 11,2 6,1 6,6 6,9 11,2 11,6 15,9 6,6 7,1 9,4 13,1 13,6 19,2 7,3 8,0 11,3 15,2 16,2 21,4 8,9 9,3

M6x1 103,8 110,0 M6x1 103,8 110,0 M6x1 89,0 120,0 M6x1 M6x1 M6x1 M6x1 89,0 120,0 M6x1 89,0 120,0 M6x1 110,2 120,0 M6x1 110,2 120,0 M6x1 89,0 132,0 M6x1 M6x1 M6x1 M6x1 89,0 132,0 M6x1 118,2 132,0 M10x1 M6x1 M6x1 M10x1 M10x1 M10x1 M10x1 M10x1 M10x1 M10x1 M10x1 M10x1 M10x1 M10x1 M10x1 M10x1 M10x1 M10x1 -

447


sin

g

Bea

55

60

65

70

75

80

r


H2 H H1 J L L1

d

D1

A

UCP200 UCP300

Sha ft d i

am Uni t

ete

r

Main dimensions [mm] L H 101,6 106,0 106,0 118,0 A1 55 66 66 72 53 53 69 69 75 55 55 72 72 81 75 75 81 81 83 80 83 88 94 88 92 94 92 A 88 110 110 110 83 83 110 110 120 88 88 110 110 120 120 120 120 120 140 120 140 140 140 140 140 140 140 J 262 300 300 330 247 247 320 320 360 262 262 330 330 380 360 360 380 380 400 380 400 450 480 450 500 480 500 N 27 27 27 33 25 25 33 33 36 27 27 33 33 36 36 36 36 36 40 36 40 40 40 40 40 40 40 N1 33 40 40 45 31 31 45 45 50 33 33 45 45 50 50 50 50 50 55 50 55 55 55 55 55 55 55 L1 100 110 110 120 96 96 120 120 125 100 100 120 120 130 125 125 130 130 135 130 135 140 140 140 140 140 140 H1 34 40 40 45 32 32 40 40 45 34 34 45 45 50 45 45 50 50 55 50 55 65 75 65 75 75 75 H2 200 210 210 235 187 187 220 220 250 200 200 235 235 275 250 250 275 275 300 280 300 320 355 320 390 355 390 s1 42,0 48,0 52,0 54,0 B B1 s 34,0 40,5 34,1 23,4 40,0 42,0 39,7 24,5 40,0 43,6 41,0 46,8 42,0 50,0 44,0 46,0 51,0 54,0 59,0

d mm

80

UKP218H UCP316 EXP316 UKP318H UCP217 EXP217 UCP317 EXP317 UKP319H UCP218 EXP218 UCP318 EXP318 UKP320H UCP319 EXP319 UCP320 EXP320 UKP322H UCP321 UCP322 UKP324H UKP326H UCP324 UKP328H UCP326 UCP328

327 400 400 430

86,0 86,0 - 106,4 86,0 85,7 73,2 96,0 - 109,5 90,0 96,0 72,5 96,0 - 115,9 97,0 103,0 122,3

85

310 95,2 310 95,2 420 112,0 420 112,0 470 125,0 327 327 430 430 490 101,6 101,6 118,0 118,0 140,0

90

95 100

470 125,0 470 125,0 490 140,0 490 140,0 520 150,0 490 140,0 520 150,0 570 160,0 600 180,0 570 160,0 620 200,0 600 180,0 620 200,0

- 108,0 - 128,6 61,0 105,0 112,0 - 117,0 65,0 112,0 69,0 121,0 73,0 131,0 126,0 135,0 145,0

105 110 115 120 125 130 140

448


B1 s A1 s A1

B1 s

B1 s1 A1 A1 Z

d

D1

d

D2

d

D2

d

B

D2

d

Dz

A

A

A

A

A

USP200

ESP200

EXP200 EXP300

UKP200H UKP300H

UCP200CO(CC)


ins

ert

Ope capn prot e *

Main dimensions [mm] D1 107,9 105,1 114,0 111,0 120,0 126,5 134,5 140,5 149,0 163,0 177,0 190,0 D2 120,0 119,0 120,0 119,0 127,0 125,0 120,0 133,0 130,0 140,0 146,0 145,0 155,0 165,0 180,0 G M10x1 M10x1 M10x1 M10x1 M10x1 M10x1 M10x1 M10x1 M10x1 M10x1 M10x1 M10x1 M10x1 M10x1 M10x1 M10x1 M10x1 M10x1 M10x1 M10x1 M10x1 M10x1 M10x1 M10x1 M10x1 M10x1 M10x1 Z Dz -

Hou

Cr [kN] P218 P316 P316 P318 P217 P217 P317 P317 P319 P218 P218 P318 P318 P320 P319 P319 P320 P320 P322 P321 P322 P324 P326 P324 P328 P326 P328 UK218G2H UC316G2 EX316G2 UK318G2H UC217G2 EX217G2 UC317G2 EX317G2 UK319G2H UC218G2 EX218G2 UC318G2 EX318G2 UK320G2H UC319G2 EX319G2 UC320G2 EX320G2 UK322G2H UC321G2 UC322G2 UK324G2H UK326G2H UC324G2 UK328G2H UC326G2 UC328G2 -

C0r [kN]

kg 13,7 19,0 20,1 25,2 10,8 11,2 21,4 22,5 30,8 13,5 13,9 25,1 26,3 37,8 30,5 32,0 38,1 39,9 51,3 38,5 47,9 61,5 79,9 58,8 96,3 75,0 90,4

96,00 71,50 122,85 86,50 122,85 86,50 143,00 108,00 83,20 63,80 83,20 63,80 132,60 96,50 132,60 96,50 156,00 122,00 96,00 71,50 96,00 71,50 143,00 108,00 143,00 108,00 171,60 140,00 156,00 122,00 156,00 122,00 171,60 140,00 171,60 140,00 205,00 178,00 182,00 155,00 205,00 178,00 228,00 208,00 252,00 242,00 228,00 208,00 275,00 272,00 252,00 242,00 275,00 272,00

100

105 110 115 120 125 130 140

449


g

sin

Bea

ring

80

85

90

95

r

Self-aligning bearing units with cast iron or pressed steel housingHigh base pillow block unit PH200N1 d N H2 H D1 G B1 s A1

H1 J L L1 A

UCPH200

Sha ft d i

am

ete Uni t

r

Main dimensions [mm] L H 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 80 80 80 80 80 90 90 90 90 90 95 95 95 95 95 100 A1 22 19 19 22 22 19 19 22 22 19 19 22 22 22 22 22 24 24 24 24 24 28 28 28 28 28 30 30 30 30 30 34 A 40 38 38 40 40 38 38 40 40 38 38 40 40 40 40 40 50 50 50 50 50 50 50 50 50 50 60 60 60 60 60 70 J 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 105 105 105 105 105 121 121 121 121 121 127 127 127 127 127 137 N 13 12 12 13 13 12 12 13 13 12 12 13 13 13 13 13 13 13 13 13 13 17 17 17 17 17 17 17 17 17 17 17 N1 19 16 16 19 19 16 16 19 19 16 16 19 19 19 19 19 19 19 19 19 19 21 21 21 21 21 21 21 21 21 21 25 L1 48 48 48 48 48 48 48 48 48 48 48 48 48 48 48 48 50 50 50 50 50 56 56 56 56 56 56 56 56 56 56 58 H1 15 13 13 15 15 13 13 15 15 13 13 15 15 15 15 15 16 16 16 16 16 18 18 18 18 18 19 19 19 19 19 19 H2 101 97 97 101 101 97 97 101 101 97 97 101 101 101 101 101 114 114 114 114 114 130 130 130 130 130 140 140 140 140 140 149 s1 18,5 20,5 22,5 24,5 B 35,0 38,0 43,0 46,0 B1 31,0 22,0 28,6 43,5 31,0 22,0 28,6 43,5 31,0 22,0 28,6 43,5 31,0 25,0 30,9 43,5 34,0 27,0 30,9 44,3 38,1 30,0 35,7 48,3 42,9 32,0 38,9 51,1 s 12,7 6,0 6,5 17,0 12,7 6,0 6,5 17,0 12,7 6,0 6,5 17,0 12,7 7,0 7,5 17,0 14,3 7,5 7,5 17,4 15,9 8,0 9,0 18,2 17,5 8,5 9,5 18,8 -

d mm

12

UCPH201 USPH201 ESPH201 EXPH201 UCPH202 USPH202 ESPH202 EXPH202 UCPH203 USPH203 ESPH203 EXPH203 UCPH204 USPH204 ESPH204 EXPH204 UKPH205H UCPH205 USPH205 ESPH205 EXPH205 UKPH206H UCPH206 USPH206 ESPH206 EXPH206 UKPH207H UCPH207 USPH207 ESPH207 EXPH207 UKPH208H

127 127 127 127 127 127 127 127 127 127 127 127 127 127 127 127 140 140 140 140 140 165 165 165 165 165 167 167 167 167 167 184

15

17

20

25

30

35

450

* = equipped with two open protective caps for passing shafts: suffix CO or COE ** = equipped with one open and one closed protectice cap for shaft ends: suffix CC or CCEB1 s A1 B1 s A1 B1 A1

s A1

s1

Z

d

D1

d

D2

d

D2

d

B

D2

d

Dz

A

A

A

A

A

USPH200

ESPH200

EXPH200

UKPH200H

UCPH200CO(CC)


ins

ert

Ope capn prot e *


Hou

Cr [kN] PH204 PH203 PH203 PH204 PH204 PH203 PH203 PH204 PH204 PH203 PH203 PH204 PH204 PH204 PH204 PH204 PH205 PH205 PH205 PH205 PH205 PH206 PH206 PH206 PH206 PH206 PH207 PH207 PH207 PH207 PH207 PH208 UC201G2 US201G2 ES201G2 EX201G2 UC202G2 US202G2 ES202G2 EX202G2 UC203G2 US203G2 ES203G2 EX203G2 UC204G2 US204G2 ES204G2 EX204G2 UK205G2H UC205G2 US205G2 ES205G2 EX205G2 UK206G2H UC206G2 US206G2 ES206G2 EX206G2 UK207G2H UC207G2 US207G2 ES207G2 EX207G2 UK208G2H CO CO COE COE CO CO COE COE CO CO COE COE CO CO COE COE CO CO CO COE COE CO CO CO COE COE CO CO CO COE COE CO CC CC CCE CCE CC CC CCE CCE CC CC CCE CCE CC CC CCE CCE CC CC CC CCE CCE CC CC CC CCE CCE CC CC CC CCE CCE CC 12,80 9,55 9,55 12,80 12,80 9,55 9,55 12,80 12,80 9,55 9,55 12,80 12,80 12,80 12,80 12,80 14,00 14,00 14,00 14,00 14,00 19,50 19,50 19,50 19,50 19,50 25,70 25,70 25,70 25,70 25,70 29,60

C0r [kN] 6,65 4,78 4,78 6,65 6,65 4,78 4,78 6,65 6,65 4,78 4,78 6,65 6,65 6,65 6,65 6,65 7,88 7,88 7,88 7,88 7,88 11,20 11,20 11,20 11,20 11,20 15,20 15,20 15,20 15,20 15,20 18,20

kg 0,9 0,7 0,7 1,0 0,9 0,7 0,7 1,0 0,8 0,7 0,7 1,0 0,9 0,8 0,9 0,9 1,2 1,2 1,2 1,2 1,2 1,8 1,7 1,7 1,7 1,8 2,3 2,2 2,2 2,3 2,4 2,9

451


g

sin

Bea

ring

12

15

17

20

25

30

35

r

Self-aligning bearing units with cast iron or pressed steel housingHigh base pillow block unit PH200N1 N H2 H G B1 s A1

d

D1

H1 J L L1 A

UCPH200

Sha ft d i

am

ete Uni t

r

Main dimensions [mm] L H 100 100 100 100 105 105 105 105 105 110 110 110 110 110 A1 34 34 34 34 36 36 36 36 36 36 36 36 36 36 A 70 70 70 70 70 70 70 70 70 70 70 70 70 70 J 137 137 137 137 146 146 146 146 146 159 159 159 159 159 N 17 17 17 17 17 17 17 17 17 20 20 20 20 20 N1 25 25 25 25 25 25 25 25 25 25 25 25 25 25 L1 58 58 58 58 62 62 62 62 62 65 65 65 65 65 H1 19 19 19 19 20 20 20 20 20 22 22 22 22 22 H2 149 149 149 149 157 157 157 157 157 165 165 165 165 165 s1 26,0 27,5 B 50,0 55,0 B1 49,2 34,0 43,7 56,3 49,2 41,2 43,7 56,3 51,6 43,5 43,7 62,7 s 19,0 9,0 11,0 21,4 19,0 10,2 11,0 21,4 19,0 10,9 11,0 24,6

d mm

40

UCPH208 USPH208 ESPH208 EXPH208 UKPH209H UCPH209 USPH209 ESPH209 EXPH209 UKPH210H UCPH210 USPH210 ESPH210 EXPH210

184 184 184 184 190 190 190 190 190 206 206 206 206 206

45

50

452

* = equipped with two open protective caps for passing shafts: suffix CO or COE ** = equipped with one open and one closed protectice cap for shaft ends: suffix CC or CCEB1 s A1 B1 s A1 B1 A1

s A1

s1

Z

d

D1

d

D2

d

D2

d

B

D2

d

Dz

A

A

A

A

A

USPH200

ESPH200

EXPH200

UKPH200H

UCPH200CO(CC)


ins

ert

Ope capn prot e *

Main dimensions [mm] D1 53,0 53,0 57,2 57,2 61,8 61,8 D2 60,3 60,3 65,0 63,5 63,5 70,0 69,9 69,9 G M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 Z 66,8 66,8 79,0 79,0 67,8 67,8 67,8 82,0 82,0 74,6 74,6 74,6 90,0 90,0 Dz 88,0 88,0 88,0 88,0 95,0 95,0 95,0 95,0 95,0 100,0 100,0 100,0 100,0 100,0

Hou

Cr [kN] PH208 PH208 PH208 PH208 PH209 PH209 PH209 PH209 PH209 PH210 PH210 PH210 PH210 PH210 UC208G2 US208G2 ES208G2 EX208G2 UK209G2H UC209G2 US209G2 ES209G2 EX209G2 UK210G2H UC210G2 US210G2 ES210G2 EX210G2 CO CO COE COE CO CO CO COE COE CO CO CO COE COE CC CC CCE CCE CC CC CC CCE CCE CC CC CC CCE CCE 29,60 29,60 29,60 29,60 31,85 31,85 31,85 31,85 31,85 35,10 35,10 35,10 35,10 35,10

C0r [kN] 18,20 18,20 18,20 18,20 20,80 20,80 20,80 20,80 20,80 23,20 23,20 23,20 23,20 23,20

kg 2,8 2,8 2,8 3,0 3,3 3,1 3,1 3,1 3,3 3,8 3,6 3,6 3,6 3,8

453


g

sin

Bea

ring

40

45

50

r

Self-aligning bearing units with cast iron or pressed steel housingTapped base pillow block unit PAE200G B1 s A1

H2 H E N J L L1 H1

d

D1

A

UCPAE200

Sha ft d i

am Uni t

ete

r

Main dimensions [mm] L L1 18,0 17,5 17,5 18,0 18,0 17,5 17,5 18,0 18,0 17,5 17,5 18,0 18,0 18,0 18,0 18,0 21,0 21,0 21,0 21,0 21,0 22,0 22,0 22,0 22,0 22,0 22,5 22,5 22,5 22,5 22,5 27,0 H 33,3 30,2 30,2 33,3 33,3 30,2 30,2 33,3 33,3 30,2 30,2 33,3 33,3 33,3 33,3 33,3 36,5 36,5 36,5 36,5 36,5 42,9 42,9 42,9 42,9 42,9 47,6 47,6 47,6 47,6 47,6 49,2 H1 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 10 10 10 10 10 11 11 11 11 11 12 12 12 12 12 13 A1 19 18 18 19 19 18 18 19 19 18 18 19 19 19 19 19 21 21 21 21 21 25 25 25 25 25 27 27 27 27 27 30 A 32 30 30 32 32 30 30 32 32 30 30 32 32 32 32 32 36 36 36 36 36 38 38 38 38 38 45 45 45 45 45 47 J 50,8 47,0 47,0 50,8 50,8 47,0 47,0 50,8 50,8 47,0 47,0 50,8 50,8 50,8 50,8 50,8 50,8 50,8 50,8 50,8 50,8 76,2 76,2 76,2 76,2 76,2 82,6 82,6 82,6 82,6 82,6 88,9 N M8 M8 M8 M8 M8 M8 M8 M8 M8 M8 M8 M8 M8 M8 M8 M8 M10 M10 M10 M10 M10 M10 M10 M10 M10 M10 M10 M10 M10 M10 M10 M12 E 10,0 10,0 10,0 10,0 10,0 10,0 10,0 10,0 10,0 10,0 10,0 10,0 10,0 10,0 10,0 10,0 12,5 12,5 12,5 12,5 12,5 12,5 12,5 12,5 12,5 12,5 12,5 12,5 12,5 12,5 12,5 15,0 H2 64 57 57 64 64 57 57 64 64 57 57 64 64 64 64 64 70 70 70 70 70 82 82 82 82 82 93 93 93 93 93 99 s1 18,5 20,5 22,5 24,5 B 35,0 38,0 43,0 46,0 B1 31,0 22,0 28,6 43,5 31,0 22,0 28,6 43,5 31,0 22,0 28,6 43,5 31,0 25,0 30,9 43,5 34,0 27,0 30,9 44,3 38,1 30,0 35,7 48,3 42,9 32,0 38,9 51,1 s 12,7 6,0 6,5 17,0 12,7 6,0 6,5 17,0 12,7 6,0 6,5 17,0 12,7 7,0 7,5 17,0 14,3 7,5 7,5 17,4 15,9 8,0 9,0 18,2 17,5 8,5 9,5 18,8 -

d mm

12

UCPAE201 USPAE201 ESPAE201 EXPAE201 UCPAE202 USPAE202 ESPAE202 EXPAE202 UCPAE203 USPAE203 ESPAE203 EXPAE203 UCPAE204 USPAE204 ESPAE204 EXPAE204 UKPAE205H UCPAE205 USPAE205 ESPAE205 EXPAE205 UKPAE206H UCPAE206 USPAE206 ESPAE206 EXPAE206 UKPAE207H UCPAE207 USPAE207 ESPAE207 EXPAE207 UKPAE208H

65 63 63 65 65 63 63 65 65 63 63 65 65 65 65 65 70 70 70 70 70 98 98 98 98 98 103 103 103 103 103 116

15

17

20

25

30

35

454


B1 s A1

B1 s A1 s

B1 s1 A1 A1 Z

d

D1

d

D2

d

D2

d

B

D2

d

Dz

A

A

A

A

A

USPAE200

ESPAE200

EXPAE200

UKPAE200H

UCPAE200CO(CC)


ins

ert

Ope capn prot e *


Cr [kN] PAE204 PAE203 PAE203 PAE204 PAE204 PAE203 PAE203 PAE204 PAE204 PAE203 PAE203 PAE204 PAE204 PAE204 PAE204 PAE204 PAE205 PAE205 PAE205 PAE205 PAE205 PAE206 PAE206 PAE206 PAE206 PAE206 PAE207 PAE207 PAE207 PAE207 PAE207 PAE208 UC201G2 US201G2 ES201G2 EX201G2 UC202G2 US202G2 ES202G2 EX202G2 UC203G2 US203G2 ES203G2 EX203G2 UC204G2 US204G2 ES204G2 EX204G2 UK205G2H UC205G2 US205G2 ES205G2 EX205G2 UK206G2H UC206G2 US206G2 ES206G2 EX206G2 UK207G2H UC207G2 US207G2 ES207G2 EX207G2 UK208G2H CO CO COE COE CO CO COE COE CO CO COE COE CO CO COE COE CO CO CO COE COE CO CO CO COE COE CO CO CO COE COE CO CC CC CCE CCE CC CC CCE CCE CC CC CCE CCE CC CC CCE CCE CC CC CC CCE CCE CC CC CC CCE CCE CC CC CC CCE CCE CC 12,80 9,55 9,55 12,80 12,80 9,55 9,55 12,80 12,80 9,55 9,55 12,80 12,80 12,80 12,80 12,80 14,00 14,00 14,00 14,00 14,00 19,50 19,50 19,50 19,50 19,50 25,70 25,70 25,70 25,70 25,70 29,60

C0r [kN] 6,65 4,78 4,78 6,65 6,65 4,78 4,78 6,65 6,65 4,78 4,78 6,65 6,65 6,65 6,65 6,65 7,88 7,88 7,88 7,88 7,88 11,20 11,20 11,20 11,20 11,20 15,20 15,20 15,20 15,20 15,20 18,20

kg 0,5 0,3 0,4 0,6 0,5 0,3 0,4 0,6 0,4 0,4 0,4 0,5 0,5 0,4 0,4 0,5 0,6 0,6 0,6 0,6 0,6 1,0 1,0 0,9 1,0 1,1 1,4 1,3 1,3 1,3 1,4 1,7

455


g

sin

Hou

Bea

ring

12

15

17

20

25

30

35

r

Self-aligning bearing units with cast iron or pressed steel housingTapped base pillow block unit PAE200G B1 s A1

H2 H E N J L L1 H1

d

D1

A

UCPAE200

Sha ft d i

am Uni t

ete

r

Main dimensions [mm] L L1 27,0 27,0 27,0 27,0 29,0 29,0 29,0 29,0 29,0 33,5 33,5 33,5 33,5 33,5 32,0 32,0 32,0 32,0 32,0 32,0 32,0 32,0 32,0 32,0 H 49,2 49,2 49,2 49,2 53,9 53,9 53,9 53,9 53,9 57,2 57,2 57,2 57,2 57,2 64,0 64,0 64,0 64,0 64,0 69,9 69,9 69,9 69,9 69,9 H1 13 13 13 13 14 14 14 14 14 15 15 15 15 15 16 16 16 16 16 16 16 16 16 16 A1 30 30 30 30 32 32 32 32 32 34 34 34 34 34 35 35 35 35 35 42 42 42 42 42 A 47 47 47 47 48 48 48 48 48 54 54 54 54 54 60 60 60 60 60 60 60 60 60 60 J 88,9 88,9 88,9 88,9 95,3 95,3 95,3 95,3 95,3 101,6 101,6 101,6 101,6 101,6 118,0 118,0 118,0 118,0 118,0 118,0 118,0 118,0 118,0 118,0 N M12 M12 M12 M12 M12 M12 M12 M12 M12 M16 M16 M16 M16 M16 M16 M16 M16 M16 M16 M16 M16 M16 M16 M16 E 15,0 15,0 15,0 15,0 15,0 15,0 15,0 15,0 15,0 20,0 20,0 20,0 20,0 20,0 20,0 20,0 20,0 20,0 20,0 20,0 20,0 20,0 20,0 20,0 H2 99 99 99 99 107 107 107 107 107 115 115 115 115 115 125 125 125 125 125 140 140 140 140 140 s1 26,0 27,5 29,0 31,0 B 50,0 55,0 59,0 62,0 B1 49,2 34,0 43,7 56,3 49,2 41,2 43,7 56,3 51,6 43,5 43,7 62,7 55,6 45,3 48,4 71,3 65,1 53,7 49,3 77,7 s 19,0 9,0 11,0 21,4 19,0 10,2 11,0 21,4 19,0 10,9 11,0 24,6 22,2 11,8 12,0 27,7 25,4 14,9 12,0 30,9

d mm

40

UCPAE208 USPAE208 ESPAE208 EXPAE208 UKPAE209H UCPAE209 USPAE209 ESPAE209 EXPAE209 UKPAE210H UCPAE210 USPAE210 ESPAE210 EXPAE210 UKPAE211H UCPAE211 USPAE211 ESPAE211 EXPAE211 UKPAE212H UCPAE212 USPAE212 ESPAE212 EXPAE212

116 116 116 116 120 120 120 120 120 135 135 135 135 135 150 150 150 150 150 150 150 150 150 150

45

50

55

60

456


B1 s A1

B1 s A1 s

B1 s1 A1 A1 Z

d

D1

d

D2

d

D2

d

B

D2

d

Dz

A

A

A

A

A

USPAE200

ESPAE200

EXPAE200

UKPAE200H

UCPAE200CO(CC)


ins

ert

Ope capn prot e *

Main dimensions [mm] D1 53,0 53,0 57,2 57,2 61,8 61,8 69,0 69,0 74,9 74,9 D2 60,3 60,3 65,0 63,5 63,5 70,0 69,9 69,9 75,0 76,2 76,2 80,0 84,2 84,2 G R1/8" R1/8" R1/8" R1/8" R1/8" R1/8" R1/8" R1/8" R1/8" R1/8" R1/8" R1/8" R1/8" R1/8" R1/8" Z 66,8 66,8 79,0 79,0 67,8 67,8 67,8 82,0 82,0 74,6 74,6 74,6 90,0 90,0 75,2 Dz 88,0 88,0 88,0 88,0 95,0 95,0 95,0 95,0 95,0 100,0 100,0 100,0 100,0 100,0 110,0 110,0 110,0 110,0 110,0 120,0 120,0 120,0 120,0 120,0

Hou

Cr [kN] PAE208 PAE208 PAE208 PAE208 PAE209 PAE209 PAE209 PAE209 PAE209 PAE210 PAE210 PAE210 PAE210 PAE210 PAE211 PAE211 PAE211 PAE211 PAE211 PAE212 PAE212 PAE212 PAE212 PAE212 UC208G2 US208G2 ES208G2 EX208G2 UK209G2H UC209G2 US209G2 ES209G2 EX209G2 UK210G2H UC210G2 US210G2 ES210G2 EX210G2 UK211G2H UC211G2 US211G2 ES211G2 EX211G2 UK212G2H UC212G2 US212G2 ES212G2 EX212G2 CO CO COE COE CO CO CO COE COE CO CO CO COE COE CO CO CO COE COE CO CO CO COE COE CC CC CCE CCE CC CC CC CCE CCE CC CC CC CCE CCE CC CC CC CCE CCE CC CC CC CCE CCE 29,60 29,60 29,60 29,60 31,85 31,85 31,85 31,85 31,85 35,10 35,10 35,10 35,10 35,10 43,55 43,55 43,55 43,55 43,55 52,50 52,50 52,50 52,50 52,50

C0r [kN] 18,20 18,20 18,20 18,20 20,80 20,80 20,80 20,80 20,80 23,20 23,20 23,20 23,20 23,20 29,20 29,20 29,20 29,20 29,20 32,80 32,80 32,80 32,80 32,80

kg 1,6 1,6 1,6 1,8 2,0 1,9 1,9 1,9 2,1 2,6 2,5 2,4 2,5 2,7 3,3 3,2 3,2 3,0 3,5 4,0 4,0 3,8 3,7 4,4

R1/8" 75,2 R1/8" 75,2 R1/8" 102,0 R1/8" 102,0 R1/8" 87,8 R1/8" 87,8 R1/8" 87,8 R1/8" 109,0 R1/8" 109,0

457


g

sin

Bea

ring

40

45

50

55

60

r

Self-aligning bearing units with cast iron or pressed steel housingTapped base pillow block unit PG200G B1 s A1

H2 H E N L1 J L H1

d

D1

A

UCPG200

Sha ft d i

am

ete Uni t

r

Main dimensions [mm] L H 33,3 30,2 30,2 33,3 33,3 30,2 30,2 33,3 33,3 30,2 30,2 33,3 33,3 33,3 33,3 33,3 36,5 36,5 36,5 36,5 36,5 42,9 42,9 42,9 42,9 42,9 47,6 47,6 47,6 47,6 47,6 49,2 A1 20 13 13 20 20 13 13 20 20 13 13 20 20 20 20 20 25 25 25 25 25 25 25 25 25 25 27 27 27 27 27 30 A 38 30 30 38 38 30 30 38 38 30 30 38 38 38 38 38 38 38 38 38 38 48 48 48 48 48 48 48 48 48 48 54 J 49 38 38 49 49 38 38 49 49 38 38 49 49 49 49 49 50 50 50 50 50 60 60 60 60 60 68 68 68 68 68 78 N M8 M6 M6 M8 M8 M6 M6 M8 M8 M6 M6 M8 M8 M8 M8 M8 M10 M10 M10 M10 M10 M10 M10 M10 M10 M10 M12 M12 M12 M12 M12 M12 E 16 15 15 16 16 15 15 16 16 15 15 16 16 16 16 16 18 18 18 18 18 18 18 18 18 18 22 22 22 22 22 22 L1 21 17 17 21 21 17 17 21 21 17 17 21 21 21 21 21 25 25 25 25 25 25 25 25 25 25 35 35 35 35 35 35 H1 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 15 15 15 15 15 17 17 17 17 17 20 20 20 20 20 20 H2 64 57 57 64 64 57 57 64 64 57 57 64 64 64 64 64 70 70 70 70 70 83 83 83 83 83 93 93 93 93 93 98 s1 18,5 20,5 22,5 24,5 B 35,0 38,0 43,0 46,0 B1 31,0 22,0 28,6 43,5 31,0 22,0 28,6 43,5 31,0 22,0 28,6 43,5 31,0 25,0 30,9 43,5 34,0 27,0 30,9 44,3 38,1 30,0 35,7 48,3 42,9 32,0 38,9 51,1 s 12,7 6,0 6,5 17,0 12,7 6,0 6,5 17,0 12,7 6,0 6,5 17,0 12,7 7,0 7,5 17,0 14,3 7,5 7,5 17,4 15,9 8,0 9,0 18,2 17,5 8,5 9,5 18,8 -

d mm

12

UCPG201 USPG201 ESPG201 EXPG201 UCPG202 USPG202 ESPG202 EXPG202 UCPG203 USPG203 ESPG203 EXPG203 UCPG204 USPG204 ESPG204 EXPG204 UKPG205H UCPG205 USPG205 ESPG205 EXPG205 UKPG206H UCPG206 USPG206 ESPG206 EXPG206 UKPG207H UCPG207 USPG207 ESPG207 EXPG207 UKPG208H

70 55 55 70 70 55 55 70 70 55 55 70 70 70 70 70 75 75 75 75 75 85 85 85 85 85 100 100 100 100 100 110

15

17

20

25

30

35

458


B1 s A1

B1 s A1 s

B1 s1 A1 A1 Z

d

D1

d

D2

d

D2

d

B

D2

d

Dz

A

A

A

A

A

USPG200

ESPG200

EXPG200

UKPG200H

UCPG200CO(CC)

Dyn am ic lo ad rati ng Sta tic loa d ra ting We igh t

Ope capn prot e *

ctiv e Clo sed cap pro ** tec tive

ins

ert


Hou

Cr [kN] PG204 PG203 PG203 PG204 PG204 PG203 PG203 PG204 PG204 PG203 PG203 PG204 PG204 PG204 PG204 PG204 PG205 PG205 PG205 PG205 PG205 PG206 PG206 PG206 PG206 PG206 PG207 PG207 PG207 PG207 PG207 PG208 UC201G2 US201G2 ES201G2 EX201G2 UC202G2 US202G2 ES202G2 EX202G2 UC203G2 US203G2 ES203G2 EX203G2 UC204G2 US204G2 ES204G2 EX204G2 UK205G2H UC205G2 US205G2 ES205G2 EX205G2 UK206G2H UC206G2 US206G2 ES206G2 EX206G2 UK207G2H UC207G2 US207G2 ES207G2 EX207G2 UK208G2H CO CO COE COE CO CO COE COE CO CO COE COE CO CO COE COE CO CO CO COE COE CO CO CO COE COE CO CO CO COE COE CO CC CC CCE CCE CC CC CCE CCE CC CC CCE CCE CC CC CCE CCE CC CC CC CCE CCE CC CC CC CCE CCE CC CC CC CCE CCE CC 12,80 9,55 9,55 12,80 12,80 9,55 9,55 12,80 12,80 9,55 9,55 12,80 12,80 12,80 12,80 12,80 14,00 14,00 14,00 14,00 14,00 19,50 19,50 19,50 19,50 19,50 25,70 25,70 25,70 25,70 25,70 29,60

C0r [kN] 6,65 4,78 4,78 6,65 6,65 4,78 4,78 6,65 6,65 4,78 4,78 6,65 6,65 6,65 6,65 6,65 7,88 7,88 7,88 7,88 7,88 11,20 11,20 11,20 11,20 11,20 15,20 15,20 15,20 15,20 15,20 18,20

kg 0,6 0,3 0,4 0,7 0,6 0,3 0,4 0,7 0,4 0,3 0,4 0,7 0,6 0,6 0,6 0,6 0,7 0,7 0,7 0,7 0,7 1,1 1,1 1,0 1,1 1,2 1,6 1,5 1,5 1,6 1,7 1,9

459


g

sin

Bea

ring

12

15

17

20

25

30

35

r

Self-aligning bearing units with cast iron or pressed steel housingTapped base pillow block unit PG200G B1 s A1

H2 H E N L1 J L H1

d

D1

A

UCPG200

Sha ft d i

am

ete Uni t

r

Main dimensions [mm] L H 49,2 49,2 49,2 49,2 53,9 53,9 53,9 53,9 53,9 57,2 57,2 57,2 57,2 57,2 63,5 63,5 63,5 63,5 63,5 69,8 69,8 69,8 69,8 69,8 A1 30 30 30 30 33 33 33 33 33 35 35 35 35 35 34 34 34 34 34 40 40 40 40 40 A 54 54 54 54 54 54 54 54 54 60 60 60 60 60 60 60 60 60 60 70 70 70 70 70 J 78 78 78 78 85 85 85 85 85 95 95 95 95 95 100 100 100 100 100 105 105 105 105 105 N M12 M12 M12 M12 M12 M12 M12 M12 M12 M16 M16 M16 M16 M16 M16 M16 M16 M16 M16 M16 M16 M16 M16 M16 E 22 22 22 22 22 22 22 22 22 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 L1 35 35 35 35 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 50 50 50 50 50 H1 20 20 20 20 20 20 20 20 20 21 21 21 21 21 25 25 25 25 25 25 25 25 25 25 H2 98 98 98 98 106 106 106 106 106 114 114 114 114 114 126 126 126 126 126 138 138 138 138 138 s1 26,0 27,5 29,0 31,0 B 50,0 55,0 59,0 62,0 B1 49,2 34,0 43,7 56,3 49,2 41,2 43,7 56,3 51,6 43,5 43,7 62,7 55,6 45,3 48,4 71,3 65,1 53,7 49,3 77,7 s 19,0 9,0 11,0 21,4 19,0 10,2 11,0 21,4 19,0 10,9 11,0 24,6 22,2 11,8 12,0 27,7 25,4 14,9 12,0 30,9

d mm

40

UCPG208 USPG208 ESPG208 EXPG208 UKPG209H UCPG209 USPG209 ESPG209 EXPG209 UKPG210H UCPG210 USPG210 ESPG210 EXPG210 UKPG211H UCPG211 USPG211 ESPG211 EXPG211 UKPG212H UCPG212 USPG212 ESPG212 EXPG212

110 110 110 110 120 120 120 120 120 135 135 135 135 135 140 140 140 140 140 150 150 150 150 150

45

50

55

60

460


B1 s A1

B1 s A1 s

B1 s1 A1 A1 Z

d

D1

d

D2

d

D2

d

B

D2

d

Dz

A

A

A

A

A

USPG200

ESPG200

EXPG200

UKPG200H

UCPG200CO(CC)


ins

ert

Ope capn prot e *

Main dimensions [mm] D1 53,0 53,0 57,2 57,2 61,8 61,8 69,0 69,0 74,9 74,9 D2 60,3 60,3 65,0 63,5 63,5 70,0 69,9 69,9 75,0 76,2 76,2 80,0 84,2 84,2 G M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 Z 66,8 66,8 79,0 79,0 67,8 67,8 67,8 82,0 82,0 74,6 74,6 74,6 90,0 90,0 75,2 75,2 75,2 102,0 102,0 87,8 87,8 87,8 109,0 109,0 Dz 88,0 88,0 88,0 88,0 95,0 95,0 95,0 95,0 95,0 100,0 100,0 100,0 100,0 100,0 110,0 110,0 110,0 110,0 110,0 120,0 120,0 120,0 120,0 120,0

Hou

Cr [kN] PG208 PG208 PG208 PG208 PG209 PG209 PG209 PG209 PG209 PG210 PG210 PG210 PG210 PG210 PG211 PG211 PG211 PG211 PG211 PG212 PG212 PG212 PG212 PG212 UC208G2 US208G2 ES208G2 EX208G2 UK209G2H UC209G2 US209G2 ES209G2 EX209G2 UK210G2H UC210G2 US210G2 ES210G2 EX210G2 UK211G2H UC211G2 US211G2 ES211G2 EX211G2 UK212G2H UC212G2 US212G2 ES212G2 EX212G2 CO CO COE COE CO CO CO COE COE CO CO CO COE COE CO CO CO COE COE CO CO CO COE COE CC CC CCE CCE CC CC CC CCE CCE CC CC CC CCE CCE CC CC CC CCE CCE CC CC CC CCE CCE 29,60 29,60 29,60 29,60 31,85 31,85 31,85 31,85 31,85 35,10 35,10 35,10 35,10 35,10 43,55 43,55 43,55 43,55 43,55 52,50 52,50 52,50 52,50 52,50

C0r [kN] 18,20 18,20 18,20 18,20 20,80 20,80 20,80 20,80 20,80 23,20 23,20 23,20 23,20 23,20 29,20 29,20 29,20 29,20 29,20 32,80 32,80 32,80 32,80 32,80

kg 1,8 1,8 1,8 2,0 2,3 2,2 2,1 2,2 2,4 2,9 2,8 2,8 2,8 3,0 3,5 3,5 3,4 3,2 3,7 4,7 4,7 4,5 4,4 5,0

461


g

sin

Bea

ring

40

45

50

55

60

r

Self-aligning bearing units with cast iron or pressed steel housingTapped base pillow block unit PA200G B1 s A1

H2 H E N J L L1 H1

d

D1

A

UCPA200

Sha ft d i

am

ete Uni t

r

Main dimensions [mm] L H 30,2 30,2 30,2 30,2 30,2 30,2 30,2 30,2 30,2 30,2 30,2 30,2 30,2 30,2 30,2 30,2 36,5 36,5 36,5 36,5 36,5 42,9 42,9 42,9 42,9 42,9 47,6 47,6 47,6 47,6 47,6 49,2 A1 22 19 19 22 22 19 19 22 22 19 19 22 22 22 22 22 23 23 23 23 23 25 25 25 25 25 27 27 27 27 27 28 A 40 36 36 40 40 36 36 40 40 36 36 40 40 40 40 40 38 38 38 38 38 48 48 48 48 48 48 48 48 48 48 54 J 52 48 48 52 52 48 48 52 52 48 48 52 52 52 52 52 56 56 56 56 56 66 66 66 66 66 80 80 80 80 80 84 N M10 M8 M8 M10 M10 M8 M8 M10 M10 M8 M8 M10 M10 M10 M10 M10 M10 M10 M10 M10 M10 M14 M14 M14 M14 M14 M14 M14 M14 M14 M14 M14 E 13 9 9 13 13 9 9 13 13 9 9 13 13 13 13 13 15 15 15 15 15 18 18 18 18 18 20 20 20 20 20 20 L1 22 20 20 22 22 20 20 22 22 20 20 22 22 22 22 22 27 27 27 27 27 30 30 30 30 30 30 30 30 30 30 32 H1 11 10 10 11 11 10 10 11 11 10 10 11 11 11 11 11 12 12 12 12 12 13 13 13 13 13 13 13 13 13 13 13 H2 62 57 57 62 62 57 57 62 62 57 57 62 62 62 62 62 72 72 72 72 72 84 84 84 84 84 95 95 95 95 95 100 s1 18,5 20,5 22,5 24,5 B 35,0 38,0 43,0 46,0 B1 31,0 22,0 28,6 43,5 31,0 22,0 28,6 43,5 31,0 22,0 28,6 43,5 31,0 25,0 30,9 43,5 34,0 27,0 30,9 44,3 38,1 30,0 35,7 48,3 42,9 32,0 38,9 51,1 s 12,7 6,0 6,5 17,0 12,7 6,0 6,5 17,0 12,7 6,0 6,5 17,0 12,7 7,0 7,5 17,0 14,3 7,5 7,5 17,4 15,9 8,0 9,0 18,2 17,5 8,5 9,5 18,8 -

d mm

12

UCPA201 USPA201 ESPA201 EXPA201 UCPA202 USPA202 ESPA202 EXPA202 UCPA203 USPA203 ESPA203 EXPA203 UCPA204 USPA204 ESPA204 EXPA204 UKPA205H UCPA205 USPA205 ESPA205 EXPA205 UKPA206H UCPA206 USPA206 ESPA206 EXPA206 UKPA207H UCPA207 USPA207 ESPA207 EXPA207 UKPA208H

76 70 70 76 76 70 70 76 76 70 70 76 76 76 76 76 84 84 84 84 84 94 94 94 94 94 110 110 110 110 110 116

15

17

20

25

30

35

462


B1 s A1

B1 s A1 s

B1 s1 A1 A1

d

D1

d

D2

d

D2

d

B

D2

A

A

A

A

USPA200

ESPA200

EXPA200

UKPA200H


ins

ert

Ope capn prot e *


Hou

Cr [kN] PA204 PA203 PA203 PA204 PA204 PA203 PA203 PA204 PA204 PA203 PA203 PA204 PA204 PA204 PA204 PA204 PA205 PA205 PA205 PA205 PA205 PA206 PA206 PA206 PA206 PA206 PA207 PA207 PA207 PA207 PA207 PA208 UC201G2 US201G2 ES201G2 EX201G2 UC202G2 US202G2 ES202G2 EX202G2 UC203G2 US203G2 ES203G2 EX203G2 UC204G2 US204G2 ES204G2 EX204G2 UK205G2H UC205G2 US205G2 ES205G2 EX205G2 UK206G2H UC206G2 US206G2 ES206G2 EX206G2 UK207G2H UC207G2 US207G2 ES207G2 EX207G2 UK208G2H CO CO COE COE CO CO COE COE CO CO COE COE CO CO COE COE CO CO CO COE COE CO CO CO COE COE CO CO CO COE COE CO CC CC CCE CCE CC CC CCE CCE CC CC CCE CCE CC CC CCE CCE CC CC CC CCE CCE CC CC CC CCE CCE CC CC CC CCE CCE CC 12,80 9,55 9,55 12,80 12,80 9,55 9,55 12,80 12,80 9,55 9,55 12,80 12,80 12,80 12,80 12,80 14,00 14,00 14,00 14,00 14,00 19,50 19,50 19,50 19,50 19,50 25,70 25,70 25,70 25,70 25,70 29,60

C0r [kN] 6,65 4,78 4,78 6,65 6,65 4,78 4,78 6,65 6,65 4,78 4,78 6,65 6,65 6,65 6,65 6,65 7,88 7,88 7,88 7,88 7,88 11,20 11,20 11,20 11,20 11,20 15,20 15,20 15,20 15,20 15,20 18,20

kg 0,6 0,4 0,4 0,7 0,6 0,4 0,4 0,6 0,5 0,4 0,4 0,6 0,5 0,5 0,5 0,6 0,8 0,7 0,7 0,7 0,8 1,1 1,1 1,0 1,1 1,2 1,5 1,5 1,4 1,5 1,6 1,8

463


g

sin

Bea

ring

12

15

17

20

25

30

35

r

Self-aligning bearing units with cast iron or pressed steel housingTapped base pillow block unit PA200G B1 s A1

H2 H E N J L L1 H1

d

D1

A

UCPA200

Sha ft d i

am

ete Uni t

r

Main dimensions [mm] L H 49,2 49,2 49,2 49,2 54,2 54,2 54,2 54,2 54,2 57,2 57,2 57,2 57,2 57,2 63,5 63,5 63,5 63,5 63,5 69,9 69,9 69,9 69,9 69,9 A1 28 28 28 28 32 32 32 32 32 32 32 32 32 32 33 33 33 33 33 36 36 36 36 36 A 54 54 54 54 60 60 60 60 60 60 60 60 60 60 66 66 66 66 66 68 68 68 68 68 J 84 84 84 84 90 90 90 90 90 94 94 94 94 94 104 104 104 104 104 114 114 114 114 114 N M14 M14 M14 M14 M14 M14 M14 M14 M14 M16 M16 M16 M16 M16 M16 M16 M16 M16 M16 M16 M16 M16 M16 M16 E 20 20 20 20 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 L1 32 32 32 32 42 42 42 42 42 35 35 35 35 35 47 47 47 47 47 52 52 52 52 52 H1 13 13 13 13 13 13 13 13 13 14 14 14 14 14 14 14 14 14 14 15 15 15 15 15 H2 100 100 100 100 108 108 108 108 108 116 116 116 116 116 125 125 125 125 125 138 138 138 138 138 s1 26,0 27,5 29,0 31,0 B 50,0 55,0 59,0 62,0 B1 49,2 34,0 43,7 56,3 49,2 41,2 43,7 56,3 51,6 43,5 43,7 62,7 55,6 45,3 48,4 71,3 65,1 53,7 49,3 77,7 s 19,0 9,0 11,0 21,4 19,0 10,2 11,0 21,4 19,0 10,9 11,0 24,6 22,2 11,8 12,0 27,7 25,4 14,9 12,0 30,9

d mm

40

UCPA208 USPA208 ESPA208 EXPA208 UKPA209H UCPA209 USPA209 ESPA209 EXPA209 UKPA210H UCPA210 USPA210 ESPA210 EXPA210 UKPA211H UCPA211 USPA211 ESPA211 EXPA211 UKPA212H UCPA212 USPA212 ESPA212 EXPA212

116 116 116 116 120 120 120 120 120 130 130 130 130 130 140 140 140 140 140 150 150 150 150 150

45

50

55

60

464


B1 s A1

B1 s A1 s

B1 s1 A1 A1

d

D1

d

D2

d

D2

d

B

D2

A

A

A

A

USPA200

ESPA200

EXPA200

UKPA200H


ins

ert

Ope capn prot e *

Main dimensions [mm] D1 53,0 53,0 57,2 57,2 61,8 61,8 69,0 69,0 74,9 74,9 D2 60,3 60,3 65,0 63,5 63,5 70,0 69,9 69,9 75,0 76,2 76,2 80,0 84,2 84,2 G M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 M6x1 Z 68,4 68,4 80,6 80,6 70,2 70,2 70,2 84,4 84,4 75,6 75,6 75,6 91,0 91,0 77,0 77,0 77,0 103,8 103,8 90,0 90,0 90,0 111,2 111,2 Dz 88,0 88,0 88,0 88,0 95,0 95,0 95,0 95,0 95,0 100,0 100,0 100,0 100,0 100,0 110,0 110,0 110,0 110,0 110,0 120,0 120,0 120,0 120,0 120,0

Hou

Cr [kN] PA208 PA208 PA208 PA208 PA209 PA209 PA209 PA209 PA209 PA210 PA210 PA210 PA210 PA210 PA211 PA211 PA211 PA211 PA211 PA212 PA212 PA212 PA212 PA212 UC208G2 US208G2 ES208G2 EX208G2 UK209G2H UC209G2 US209G2 ES209G2 EX209G2 UK210G2H UC210G2 US210G2 ES210G2 EX210G2 UK211G2H UC211G2 US211G2 ES211G2 EX211G2 UK212G2H UC212G2 US212G2 ES212G2 EX212G2 CO CO COE COE CO CO CO COE COE CO CO CO COE COE CO CO CO COE COE CO CO CO COE COE CC CC CCE CCE CC CC CC CCE CCE CC CC CC CCE CCE CC CC CC CCE CCE CC CC CC CCE CCE 29,60 29,60 29,60 29,60 31,85 31,85 31,85 31,85 31,85 35,10 35,10 35,10 35,10 35,10 43,55 43,55 43,55 43,55 43,55 52,50 52,50 52,50 52,50 52,50

C0r [kN] 18,20 18,20 18,20 18,20 20,80 20,80 20,80 20,80 20,80 23,20 23,20 23,20 23,20 23,20 29,20 29,20 29,20 29,20 29,20 32,80 32,80 32,80 32,80 32,80

kg 1,8 1,7 1,8 1,9 2,2 2,1 2,1 2,1 2,3 2,7 2,6 2,5 2,6 2,8 3,3 3,2 3,1 2,9 3,5 4,1 4,1 3,9 3,8 4,5

465


g

sin

Bea

ring

40

45

50

55

60

r

Self-aligning bearing units with cast iron or pressed steel housingFour-bolt flanged unit FE200G N e s A2 B1

J

L

d

D1

J L

A1 A

UCFE200

Sha ft d i

am

ete Uni t

r

Main dimensions [mm] L J 63,5 54,0 54,0 63,5 63,5 54,0 54,0 63,5 63,5 54,0 54,0 63,5 63,5 63,5 63,5 63,5 70,0 70,0 70,0 70,0 70,0 82,5 82,5 82,5 82,5 82,5 92,0 92,0 92,0 92,0 92,0 101,5 A 29,5 31,0 31,0 29,5 29,5 31,0 31,0 29,5 29,5 31,0 31,0 29,5 29,5 29,5 29,5 29,5 30,0 30,0 30,0 30,0 30,0 33,5 33,5 33,5 33,5 33,5 36,0 36,0 36,0 36,0 36,0 39,5 A1 10,0 9,5 9,5 10,0 10,0 9,5 9,5 10,0 10,0 9,5 9,5 10,0 10,0 10,0 10,0 10,0 11,0 11,0 11,0 11,0 11,0 12,0 12,0 12,0 12,0 12,0 12,5 12,5 12,5 12,5 12,5 13,0 A2 37,3 33,0 39,1 45,5 37,3 33,0 39,1 45,5 37,3 33,0 39,1 45,5 37,3 37,0 42,4 45,5 37,5 38,7 38,5 42,4 45,9 40,5 42,2 42,0 46,7 50,1 43,5 46,4 44,5 50,4 53,3 48,5 e 19,0 17,0 17,0 19,0 19,0 17,0 17,0 19,0 19,0 17,0 17,0 19,0 19,0 19,0 19,0 19,0 19,0 19,0 19,0 19,0 19,0 20,0 20,0 20,0 20,0 20,0 21,0 21,0 21,0 21,0 21,0 24,0 N 11,5 11,5 11,5 11,5 11,5 11,5 11,5 11,5 11,5 11,5 11,5 11,5 11,5 11,5 11,5 11,5 11,5 11,5 11,5 11,5 11,5 11,5 11,5 11,5 11,5 11,5 14,0 14,0 14,0 14,0 14,0 14,0 s1 18,5 20,5 22,5 24,5 B 35,0 38,0 43,0 46,0 B1 31,0 22,0 28,6 43,5 31,0 22,0 28,6 43,5 31,0 22,0 28,6 43,5 31,0 25,0 30,9 43,5 34,0 27,0 30,9 44,3 38,1 30,0 35,7 48,3 42,9 32,0 38,9 51,1 s 12,7 6,0 6,5 17,0 12,7 6,0 6,5 17,0 12,7 6,0 6,5 17,0 12,7 7,0 7,5 17,0 14,3 7,5 7,5 17,4 15,9 8,0 9,0 18,2 17,5 8,5 9,5 18,8 -

d mm

12

UCFE201 USFE201 ESFE201 EXFE201 UCFE202 USFE202 ESFE202 EXFE202 UCFE203 USFE203 ESFE203 EXFE203 UCFE204 USFE204 ESFE204 EXFE204 UKFE205H UCFE205 USFE205 ESFE205 EXFE205 UKFE206H UCFE206 USFE206 ESFE206 EXFE206 UKFE207H UCFE207 USFE207 ESFE207 EXFE207 UKFE208H

86 76 76 86 86 76 76 86 86 76 76 86 86 86 86 86 95 95 95 95 95 108 108 108 108 108 118 118 118 118 118 130

15

17

20

25

30

35

466

* = equipped with one open protective cap for passing shafts: suffix CO or COE ** = equipped with one closed protectice cap for shaft ends: suffix CC or CCE

A2 e B1 s

e s

A2 B1

A2 e B1 s e

A2 s1 Z

d

D1

d

D2

d

D2

d

B

D2

d

Dz

A1 A

A1 A

A1 A

A1 A A

USFE200

ESFE200

EXFE200

UKFE200H

UCFE200CO(CC)


ins

ert

Ope capn prot e *

g


Cr [kN] FE204 FE203 FE203 FE204 FE204 FE203 FE203 FE204 FE204 FE203 FE203 FE204 FE204 FE204 FE204 FE204 FE205 FE205 FE205 FE205 FE205 FE206 FE206 FE206 FE206 FE206 FE207 FE207 FE207 FE207 FE207 FE208 UC201G2 US201G2 ES201G2 EX201G2 UC202G2 US202G2 ES202G2 EX202G2 UC203G2 US203G2 ES203G2 EX203G2 UC204G2 US204G2 ES204G2 EX204G2 UK205G2H UC205G2 US205G2 ES205G2 EX205G2 UK206G2H UC206G2 US206G2 ES206G2 EX206G2 UK207G2H UC207G2 US207G2 ES207G2 EX207G2 UK208G2H CO CO COE COE CO CO COE COE CO CO COE COE CO CO COE COE CO CO CO COE COE CO CO CO COE COE CO CO CO COE COE CO CC CC CCE CCE CC CC CCE CCE CC CC CCE CCE CC CC CCE CCE CC CC CC CCE CCE CC CC CC CCE CCE CC CC

Documents

16- Rulment Radial Cu Inel Exterior Sferic