189814 Product Selector

5/21/2018 189814 Product Selector

1/158Issue 2

Product Selector

Industrial Adhesives, Sealantsand Surface Treatment Solutions


2/158

Innovative pretreatment technology

to improve your production process

High performance engineering

adhesives and sealants

Advanced flexible bonding and

sealing solutions

Henkel Your Expert for Industrial Adhesives, Sealantsand Surface Treatment Solutions

Partner

Experienced sales and technical engineers are

available around the clock

Extensive technical support and certified

testing methods provide the most effective andreliable solutions

Advanced training programmes tailored to your

specific needs will help you become the expert

A strong distribution network puts our complete

product range close to your operation, ensuring

a high level of worldwide product availability

Identify potential cost savings and process

improvements for your operations

Nowadays, if you want to create added value, an excellent product por tfolio simply is not good enough. You need

a partner who understands your business and your products, who develops new production techniques, optimises

your processes together with you and designs tailor-made system solutions.

A partner who can make a real contribution to long-lasting value creation for you:

Henkel the worldwide market leader in adhesives, sealants and surface treatment. Get access to our unique andcomprehensive product portfolio, benefit from our exper tise and guarantee your highest process reliability. The

General Industry Business fulfils specific industry and maintenance needs from one source.

Innovation

Advanced solutions to increase your innovation

power

Set new industry standards for sustainability

and health and safety in your processes

Create the basis for the development of new

product design opportunities

2


3/158

Empowering y

Technology

Access to a complete product portfolio deliveringsuperior performance for an extensive number ofapplications

Use products that have been designed to meet

Brands

The preferred globhigh-performancetreatment solutionand maintenance


4/158

Whatever You Build, Assemble or Repair...

General Cleaners

CleaningSpecialities

CleaningPre-

Treatmen

Technical

Consultancy

Metal

Working

Technical advice(calculation, designselection)

Process simulation

Line design andengineering

Testing

Cutting Fluids

Stamping andDrawing Fluids

ConversionCoatings

Surface Prepara

Henkels Product Portfolio across the entire Value Chain

Henkel offers you more than state-of-the-art adhesives, sealants and surface treatmaccess to our unique expertise covering the entire value chain. So whatever you buitechnical consultancy and expert training will complement our engineering solution

Optimise your production line process

Enhance your product


5/158

Filling

Protecting

Removal of Paint

Functional Coatings

Anti-Seizes

Dry Film and O

Greases

EngineeringApplications

General Sealing

SealingFilling &

ProtectingCoating Lubricat

Find the R


6/158

Table of Contents

Engineering Applications

Bonding

Structural Bonding

Sealing

Filli & P t ti d C ti

8 Threadlocking Adhesives

14 Thread Sealants

20 Gasketing Products26 Retaining Compounds

32 Instant Adhesives

40 Light Cure Adhesives

48 Hotmelt Adhesives

54 Solvent-based / Water-based Adhesives

56 Structural Bonding

58 Epoxies

62 Acrylics

66 Polyurethanes

72 Silicones

76 Silane Modified Polymers

80 Butyls


7/158

Cleaning

Lubricating

Pre-Treatment

Equipment

102 Cleaning

104 Parts and Hand Cleaning

106 Maintenance Cleaning in Workshops

108 Maintenance Cleaners

110 Industrial Cleaners

112 Cleaning, Protecting and Specialities

114 Lubrication

116 Anti-Seizes

118 Dry Film and Oils

120 Greases

122 Cutting, Stamping and Drawing Fluids

124 Surface Preparation

130 Pre-Treatment and Coatings

132 Metal Pre-Treatment

134 Mould Release Agents

142 Equipment


8/158

Advantages of LoctiteThreadlockers as compared to traditional mechanical

Prevent unwanted movement, loosening, leaks, and corrosion

Resist vibration

Single-component clean and easy to apply

Can be used on all sizes of fasteners reduces inventory costs

Seal threads allow through-hole tapping

Why use a LoctiteThreadlocker?

Loctitethreadlocking products prevent self-loosening and svibration and shock loads. They are easy-flowing liquids or sthe gaps between mating threads. When used to assemble tpermanently secure threaded assemblies and eliminate frettassembly.

LoctiteThreadlockers are much superior to tmethods:

Mechanical devices, e.g. split pins, tab washers: Only used

Friction devices: add to absolute elasticity and/or increasethreadlocking under dynamic loads

Locking devices, like tooth flanged and ribbed flanged boltself-loosening, but are expensive and need larger flange-b

surfaces.LoctiteThreadlockers are single-component liquid and semtemperature to a hard solid thermoset plastic when applied other metal surfaces. They cure in the absence of air. The admating threads to lock threads and joints.

Threadlocking AdhesivesLocking of Threaded Fasteners


9/158

Surface Preparation

Correct surface preparation is the most important factor to assure the total success of any adhesiveperformance.

Degrease, clean and dry threads prior to applying the adhesive use Loctite7063 (see Cleaningon page 102)

If the parts were in contact with aqueous washing solutions or cutting fluids which leave aprotective layer on the surface, wash with hot water

If the adhesive is applied below 5C, pre-treatment with Loctite

7240 or Loctite

7649 is advised(see Surface Preparation on page 124)

For locking of plastic fasteners: see Instant Adhesives on pages 32-39

Hand-Held ApplicatorLoctite98414 Peristaltic Hand Pump, 50ml bottleLoctite97001 Peristaltic Hand Pump, 250ml bottleThese hand-held applicators mount easily on any anaerobic Loctite50ml or 250ml bottle,converting the bottle into a portable dispenser. They are designed to dispense at any angle indrop sizes from 0.01 to 0.4ml, without leaks or product waste (suitable for viscosities up to

30,000 mPas).

For information on semi- or fully automated dispensing equipment, available valves, spareparts, accessories and dispensing tips, please refer to page 142 or the LoctiteEquipmentS

Semi-Automatic Dispensing EquipmentLoctite97009 / 97121 / 97201LoctiteSemi-Automatic Dispensing Equipment combines a controller and reservoir into a singleunit for valve dispensing of many LoctiteThreadlockers. Provides digital timing control, empty andend-of-cycle signal. Pinch Valve suitable for stationary or hand-held mode. The reservoirs are largeenough to accept up to 2kg bottles, and units can be equipped with low level sensing.

Loctiteproducts are used for a wide variety of threadlocking applications. For some jobs it is sufficient to dispense

from the bottle or cartridge onto the surfaces to be joined. In other cases, however, more precise hand-held or statrequired. Loctitedispensing equipment is specially designed to make application and use of our products fast, pre

Dispensing Equipment

Bonding


10/158

Solution

Are the metal parts already assembled?

Handy Hints:

Degrease, clean and dry surfaces prior to applying the adhesive use Loctite7063(see Cleaning on page 102)

If the adhesive is applied below 5C, pre-treatment with Loctite7240 orLoctite7649 is advised (see Surface Preparation on page 124)

For plastic part(s) please refer to Instant Adhesives on pages32-39

Loctite

290

Yes

Wicking grade

Medium/High

Liquid

Size of thread Up to M80

Functional strength after1 3 h

Breakaway torque M10 bolts 10 Nm

Service temperature range -55 to +150C

Pack sizes 10ml, 50ml, 250ml, 2lt

Equipment297001, 98414, 97009, 9712

97201

Loctite 290

Threadlocking AdhesivesProduct table


11/158

No

What strength do you require?

Loctite

243

Medium

Liquid

High

Loctite

270

Liquid

Loctite

2400

Liquid

Up to M80 Up to M80 Up to M80

2 h 2 h 3 h

26 Nm 20 Nm 33 Nm

-55 to +180C -55 to +150C -55 to +180C

10ml, 50ml, 250ml, 2lt 50ml, 250ml 10ml, 50ml, 250ml, 2lt

97001, 98414, 97009, 97121,97201

97001, 9841497001, 98414, 97009, 97121,

97201

Loctite 243 Loctite 2400 Loctite 270

Bonding


12/158

Threadlocking AdhesivesProduct list

ProductChemical

basisColour Fluorescence

Max.thread

size

Servicetemperature

rangeS

Loctite221

Methacrylate

Purple Yes M80 -55 to +150C

Loctite222 Purple Yes M80 -55 to +150C

Loctite241 Blue opaque Yes M80 -55 to +150C M

Loctite242 Blue Yes M80 -55 to +150C M



Loctite248 Stick Blue Yes M50 -55 to +150C M

Loctite262 Red Yes M80 -55 to +150C Med

Loctite268 Stick Red Yes M50 -55 to +150C

Loctite270 Green Yes M80 -55 to +180C

Loctite271 Red Yes M80 -55 to +150C

Loctite272 Red-orange No M80 -55 to +200C



Loctite277 Red Yes M80 -55 to +150C

Loctite

278 Green No M80 -55 to +200C

Loctite290 Green Yes M80 -55 to +150C Med




13/158

Viscosity inmPas

Fixture timesteel

Fixture timebrass

Fixture timestainless steel

Pack sizes Comments

100 150 25 min. 20 min. 210 min. 250ml Low strength, low visco

900 1,500 15 min. 8 min. 360 min.10ml, 50ml,

250ml

Low strength, general p

100 150 35 min. 12 min. 240 min. 250ml Medium strength, low v

800 1,600 5 min. 15 min. 20 min. 250ml Medium strength, med

1,300 3,000 10 min. 5 min. 10 min.10ml, 50ml,250ml, 2lt

Medium strength, gene

5,600 10,000 20 min. 12 min. 240 min. 50ml, 250ml Medium strength, med

Semi-solid 5 min. 20 min. 9g, 19g Medium strength, posit

1,200 2,400 15 min. 8 min. 180 min. 250ml Medium/high strength,

Semi-solid 5 min. 5 min. 19g High strength, positioni

400 600 10 min. 10 min. 150 min.10ml, 50ml,250ml, 2lt

High strength, general

400 600 10 min. 5 min. 15 min. 50ml High strength, low visc

4,000 15,000 40 min. 50ml, 250ml High strength, high tem

5,000 10,000 15 min. 7 min. 180 min. 250ml, 2lt High viscosity, high stre

380 620 3 min. 3 min. 5 min. 50ml High strength, especial

6,000 8,000 30 min. 25 min. 270 min. 50ml, 250ml High viscosity, high stre

2,400 3,600 20 min. 20 min. 60 min. 50ml, 250ml High strength, high tem

20 55 20 min. 20 min. 60 min.10ml, 50ml,250ml, 2lt

Medium/high strength,

225 475 10 min. 8 min. 10 min. 50ml, 250ml Medium strength, no la

350 550 5 min. 4 min. 5 min. 50ml High strength, no labell

Bonding


14/158

Thread SealantsSealing of Threaded Components

Why use a LoctiteThread Sealant?

LoctiteThread Sealants, are available in liquid form or as aof gases and liquids. Designed for low and high pressure apthreaded parts and provide an instant, low pressure seal. Wstrength of most pipe systems.

LoctiteSealants are much superior to traditi Solvent-based sealing compounds: Shrink during cure as

re-torqued to minimise voids. They lock the assembly by a

PTFE tape: Lubricates allowing fittings to loosen under dynclamping force and leakage. Dynamic loads may acceleralubricating effect of PTFE frequently results in over-tightenbreakage of parts. Application requires good professional

Hemp & Paste: Slow to apply and require a lot of expertisethe torque needed to obtain the correct pre-stress. Frequeseal of the assembly.

Advantages of LoctiteThread Sealants as compared to traditional sealant ty

Single-component clean and easy to apply

Does not creep, shrink or block systems

Can be used on any size of pipe fitting

Replaces all types of tape and hemp/paste sealants

The seal resists vibration and shock loads

Grades with several approvals, e.g. Loctite55 Sealing Cord: Potable water (KTW) and Gas (DVGW)

Protect mated threaded areas against corrosion


15/158

Correct surface preparation is the most important factor to assure the total success of any sealantperformance. Without suitable surface preparation, Loctitethread sealing applications can fail.

Degrease, clean and dry surfaces prior to applying the sealant use Loctite7063 (SeeCleaning page102)

If anaerobic sealants are applied below 5C, pre-treatment with Activator Loctite7240,Loctite7471 or Loctite7649 is required

For Sealing Cord Loctite

55: Clean parts with Loctite

7063 and roughen smooth threads

Anaerobic Sealants:Loctiteanaerobic sealants can be applied by hand or with automatic or semi-automatic equipment.Excess material can be wiped away.

Hand-Held ApplicatorLoctite98414 Peristaltic Hand Pump will with stand for the Loctite50ml bottle, andLoctite97001 Peristaltic Hand Pump for the Loctite250ml bottle. They are designed to dispense atany angle in drop sizes from 0.01 to 0.4ml with viscosities up to 30,000 mPas, without post-drippingor product waste.

Loctite97002 Pneumatic Cartridge DispenserHand-held unit for 300ml cartridges tubes. With integrated pressure regulator and quick pressurerelief valve. No run-on.

Surface Preparation


For information on semi- or fully automated dispensing equipment, available valves, spareparts, accessories and dispensing tips, please refer to page 142or the LoctiteEquipmentSourcebook.

Sealing


16/158

Are the parts metal or plastic?

Handy Hints:

Degrease, clean and dry surfaces priorto applying the adhesive use Loctite7063 (see Cleaning onpage 102)

If the anaerobic sealant (Loctite542,561 572 577 or 586) is applied below

Metal, plastic or a combination of both

Do you need to make post assembly adjustments?

Yes No

Cord Gel

Loctite

55Loctite

5331

Substrate to be sealed Metal, plastic or both Metal, plastic or both

Maximum pipe size Tested to 4" 3"

Disassembly strength Low Low

Instant low pressure seal Yes (full pressure) Yes

Service temperature range -55 to +130C -50 to +150C

Pack sizes 50m, 150m cord 100ml

Equipment1 N.A. N.A.

Thread SealantsProduct table

Solution


17/158

Metal

Are the threads fine or coarse?

Medium Coarse

GelGel

Metal Metal Metal

2" 3" 3"

Medium Medium Medium

No Yes Yes

-55 to +150C -55 to +150C -55 to +150C

Not available in the U.K. 50ml, 250ml, 2lt, 2lt BIB 50ml, 250ml

N.A. 97002, 97124 97002

Loctite

577Loctite

586

Gel

Loctite

5776

Sealing


18/158

Product Chemical basis Colour FluorescenceMax. thread

size

Servictemperat

range

Loctite55PA-multi-filament

White No R4" -55 to +13

Loctite511 Methacrylate White to off-white No M80/R3" -55 to +15

Loctite542 Methacrylate Brown No M26/R3/4" -55 to +15

Loctite549 Methacrylate Orange No M80/R3" -55 to +15

Loctite561 Stick Methacrylate Orange No M80/R3" -55 to +15

Loctite567 Methacrylate Off-white No M80/R3" -55 to +15

Loctite570 MethacrylateOpaque

Silver brown No M80/R3" -55 to +15

Loctite572 Methacrylate White to off-white No M80/R3" -55 to +15

Loctite577 Methacrylate Yellow Yes M80/R3" -55 to +15

Loctite582 Methacrylate Blue Yes M56/R2" -55 to +15

Loctite586 Methacrylate Red Yes M56/R2" -55 to +15

Loctite5331 Silicone White No M80/R3" -55 to +15




Thread SealantsProduct list


19/158

Viscosity in mPas Thixotropy Approval* Pack sizes Comments

Cord DVGW, KTW, NSF 50m, 150m cord For plastic and metal, esp. ga

9,000 22,000 Yes DVGW 50ml, 250ml For metal, low strength, gene

400 800 No DVGW, WRAS 10ml, 50ml, 250ml For metal, esp. hydraulic pipe

20,000 Yes 250ml For metal, high strength, slow

Semi-solid NSF 19g Stick, for metal threads, MRO

280,000 800,000 Yes UL 50ml, 250ml For metal, low strength, coar

16,000 24,000 Yes Not available in the U.K. For metal, low strength, very

14,400 28,600 Yes 50ml, 250ml For metal, slow curing

16,000 33,000 Yes DVGW, NSF, BAM 50ml, 250ml, 2lt For metal, general purpose

4,500 5,500 No Not available in the U.K. For metal, medium strength,

4,000 6,000 Yes BAM Not available in the U.K. For metal, high strength, exce

50,000 Yes DVGW, WRAS, NSF 100ml For plastic and metal

5,000 20,000 Yes 50ml, 250ml For metal, no labelling, white

16,000 33,000 Yes PMUC 50ml For metal, especially for nucl

1,000 6,000** Yes DVGW, KTW 50ml, 250ml For metal, especially gas and

Sealing


20/158

Gasketing ProductsSealing of Flanges

Gaskets are used to prevent leakage of fluids or gases by fogasketing, it is necessary that the seal must remain intact aThe gasket must be resistant to fluids and/or gases, and witpressures to which it is subjected. LoctiteGasketing produa perfect seal between components, with maximum face-tocorrosion. A low-pressure seal is formed immediately on ass

joint that wont shrink, crack or relax.

LoctiteGasketing Products offer a much highnumerous benefits over traditional sealing sys

The major causes of failure and leakage of compression gas

Surface contact: Compression gaskets do not provide totasurfaces. Therefore minor leakages may occur (weeping).

Compression set: Compression gaskets relax under dynam

subsequent loss of bolt tension in the flange joint resulting Extrusion: Gaskets can be squeezed out between flanges

Bolt hole distortion: High stresses are transferred to the gathe gasket to crack, tear, rupture or extrude.

Why use a LoctiteGasketing Produ

Advantages of LoctiteGasketing Products as compared to conventional pre-

Single-component easy and clean to apply

Replace conventional gaskets reduce inventory

Fills all voids

No need for retorquing

Excellent instant seal

High resistance to solvents

Resists high pressure when fully cured


21/158

Surface Preparation


Components should be clean and free from contamination such as grease, oil, gasket and sealantresidues, etc.

Degrease, clean and dry surfaces prior to applying the sealant use Loctite7063 (See Cleaningon page 102)

For maintenance and repair, remove residues of old gaskets with Loctite7200 Gasket Removerand clean surfaces with Loctite7063 (see Cleaning on page 102)

If the anaerobic sealant is applied below 5C, pre-treatment with Loctite

7240, Loctite

7471 orLoctite7649 is advised (see Surface Preparation on page 124)

Cartridge GunStaku 142240 Hand-held, manually operated dispenser for all standard 300ml cartridges

Rapid loading system to make cartridge changes clean and easy

Cartridge GunLoctite97002 Pneumatic Cartridge Dispenser Hand-held unit for 300ml cartridges and 250ml squeeze tubes

Integrated pressure regulator

Quick pressure relief, to minimise run-on effect

LoctiteCartridge Dispensers are ergonomically designed for the hand delivery of Loctitesealants.Whether manual or pneumatic, each item is designed for simple, clean, hand-held dispensing ofLoctiteGasketing Products:

For information on semi- or fully automated dispensing equipment, available valves, spareparts, accessories and dispensing tips, please refer to page 142 or the LoctiteEquipment

Sealing


22/158

Handy Hints:

Remove residues of old gaskets with Loctite7200 Gasket Remover

Degrease, clean and dry surfaces prior to applying theadhesive use Loctite7063 (See Cleaning on page102)

If the anaerobic sealant is applied below 5C, pre-treatment withLoctite7240 or Loctite7649 is advised (See Surface Preparationon page 124)

Solution

Paste Ge

Meta

What gap must the sealant fill?

Loctite

574Locti

518

Product table

Gasketing Products

Up to 0.2

Flange type Rigid Rigi

Cure method Anaerobic Anaero

Oil resistance Excellent Excell

Water/Glycol resistance Excellent Excell

Service temperature range -55 to +150C -55 to +

Pack size50ml, 160ml cartridge,

250ml, 2lt50ml, 6

300ml cartrid

Equipment1 97002, 91124 142240,


23/158

Paste Paste Paste

Plastic, metals or combinat

Greater than 0.25 m

Loctite

510Loctite

5926Loctite

5699

Rigid Rigid Flexible Flexible

Anaerobic Anaerobic Moisture Moisture

Excellent Excellent Good Good

Excellent Excellent Good Excellent

-55 to +180C -55 to +200C -55 to +200C -60 to +200C

50ml, 300ml cartridge 50ml, 160ml, 250ml 40ml tube80ml, 300ml cartridg

20lt

142240, 97002 142240, 97002 N.A. 142240, 97002

Loctite

5800

Gel

Sealing

G k i P d


24/158

Product list

Gasketing Products

Product Chemical basis Colour FluorescenceService

temperaturerange

Strength

Loctite510

Methacrylate

Pink No -55 to +200C Medium

Loctite515 Dark purple Yes -55 to +150C Medium

Loctite518 Red Yes -55 to +150C Medium

Loctite573 Green Yes -55 to +150C Low

Loctite574 Orange Yes -55 to +150C Medium


Loctite5203 Red Yes -55 to +150C Very low




Loctite128068 Dark purple Yes -55 to +150C Medium

Loctite5699

Silicone

Grey No -60 to +200C Low

Loctite5900 Black No -55 to +200C Low

Loctite5910 Black No -60 to +200C Low

Loctite 5920 Copper No -60 to +350C Low


25/158

Max. gapin mm

Fixture timesteel

Fixture timealuminium

Pack sizes Comments

0.25 25 min. 45 min. 50ml, 160ml, 250ml For machined, rigid metal flanges h

0.25 30 min. 30 min. 50ml, 300ml For machined, rigid metal flanges m

0.3 25 min. 20 min.50ml, 65ml,

300ml cartridge, 850mlFor machined, rigid metal flanges s

0.1 9 h 12 h 250ml For machined, rigid metal flanges s

0.25 15 min. 45 min.50ml, 160ml cartridge,

250ml, 2ltFor machined, rigid metal flanges g

0.25 25 min. 10 min. 50ml, 300ml, 850ml, 2lt For machined, rigid metal flanges h

0.125 10 min. 20 min. 300ml For machined, rigid metal flanges e

0.25 25 min. 25 min. 50ml, 300ml, 850ml For machined, rigid metal flanges s

0.125 12 min. 30 min. 250ml For machined, rigid metal flanges

0.25 25 min. 20 min. 50ml, 300ml cartridge For machined, rigid metal flanges n

0.1 1 h 3 h 300ml, 850ml For machined, rigid metal flanges s

Skin over timeCure through

volume in 24 h

1 30 min. 2.5 mm80ml, 300ml cartridge,

20ltFor flexible flanges, machined or casexcellent in water/glycol

1 15 min. 2.5 mm 50ml, 300ml, 20lt Thixotropic paste, black, excellent in

1 40 min. 2.75 mm300ml cartridge, 80ml

tubeFor flexible flanges, machined or cas

1 40 min 2 5 mm80ml tube, For flexible flanges, machined or cas

Sealing

R t i i C d


26/158

Retaining CompoundsCylindrical Assemblies

Why use a LoctiteRetaining Compo

LoctiteRetaining Compounds secure bearings, bushes andshafts. They achieve maximum load transmission capability eliminate fretting corrosion. Applied as a liquid, they form a surfaces, eliminating the need for expensive replacement paof mechanical methods. LoctiteRetaining Compounds fill th

cure to form a strong precision assembly.

LoctiteRetaining Compounds are much supemethods:

Pins, key/keyway assemblies: Have uneven distribution of vibration at high speeds.

Splines and serrations: They cause high stresses due to tha key. High machining costs.

Clamp rings, press fits, shrink fits, and taper fits: They rely

therefore they are limited by material, surfaces and designspecific load capacities, leading to high production costs. components that can lead to failure, particularly when com

Welding and soldering: Only compatible metals can be joinhigh temperatures required. Heating of the material can ledegradation. Disassembly can also be difficult or impossib

Advantages of LoctiteRetaining Compounds as compared to conventional a

High-strength products can carry high loads

Fill all voids to prevent corrosion and fretting

100% contact load and stress is distributed evenly over the joint

Advantages of LoctiteRetaining Compounds in combination with shrink fits

Higher load transmission and performance with existing design and geometry solutions

Equal performance by lower interference/lighter construction


27/158

Components should be clean and free from contamination such as grease, oil, cutting fluids,protective coatings, etc.

Degrease, clean and dry surfaces prior to applying the sealant use Loctite7063 (See Cleaningon page 102)

If the adhesive is applied below 5C, pre-treatment with Activator Loctite7240 or Loctite7649is advised (see Surface Preparation on page 124)

The cure speed of the retaining compound can be increased by use of Activator Loctite7649 orLoctite7240 (see Surface Preparation on page 124).


Surface Preparation

LoctiteRetaining Compounds can be applied with automated process equipment or dispensedmanually.

Semi-Automatic Dispensing EquipmentLoctite97009 / 97121 / 97201LoctiteSemi-Automatic Dispensing Equipment combines a controller and reservoir into a singleunit for valve dispensing of many Loctiteproducts. Provides digital timing control, empty andend-of-cycle signal. Pinch Valve suitable for stationary or hand-held setup mode. The reservoirs arelarge enough to accept 2kg bottles, and units can be equipped with low level sensing.

Hand-Held ApplicatorLoctite98414 Peristaltic Hand Pump, 50ml bottleLoctite97001 Peristaltic Hand Pump, 250ml bottleThese hand-held applicators mount easily on any anaerobic Loctite50ml or 250ml bottle,converting the bottle into a portable dispenser. They are designed to dispense at any angle indrop sizes from 0.01 to 0.04ml, without leaks or product waste (suitable for viscosities up to30,000 mPas).

For information on semi- or fully automated dispensing equipment, available valves, spareparts, accessories and dispensing tips, please refer to page 142or the LoctiteEquipmentS b k

Bonding

Retaining Compounds


28/158

Product table

Retaining Compounds

Handy Hints:

Degrease, clean and dry surfaces prior to applying theadhesive use Loctite7063 (See Cleaning on page 102)

If the adhesive is applied below +5C, pre-treatment withLoctite7240 or Loctite7649 is advised (See Surface Preparationon page 124)

Use in conjunction with existing designs to increase their strength

Yes

Gel Liqu

Disasserequi

Is the assembly very loose or badly worn?

Loctite660 Locti64

Diametrical clearance Up to 0.5 mm Up to 0.1

Strength required High Mediu

Handling strength after1

15 min. 25 m


Pack size 50ml 10ml, 50m

Equipment2 142240 97001, 9

Solution(with Activator 7240 or 7649)


29/158

Liquid Liquid Liquid

No disassembly required

What service temperature is required?

Up to +175C

Gap 0.25 mm

Up

No

Loctite

6300Loctite

640Loctite

638

Up to 0.15 mm Up to 0.15 mm Up to 0.1 mm Up to 0.25 mm

High High High High

3 min. 10 min. 24 h 4 min.

-55 to +175C -55 to +175C -55 to +175C -55 to +150C

50ml, 250ml, 2lt 50ml, 250ml 250ml 3ml, 50ml, 250ml, 2l

97001, 98414, 97009,97121, 97201

97001, 98414 97001, 9841497001, 98414, 97009

97121, 97201

Loctite

648

Liquid

Bonding

Retaining Compounds


30/158

Product list

Retaining Compounds

Product Chemical basis Colour FluorescenceService

temperaturerange

Tensile sheastrength in

N/mm2

Loctite601

Methacrylate

Green Yes -55 to +150C > 15

Loctite603 Green Yes -55 to +150C > 22.5

Loctite620 Green No -55 to +230C** > 24.1

Loctite638 Green Yes -55 to +150C > 25

Loctite640 Green Yes -55 to +175C 22

Loctite641 Yellow No -55 to +150C > 6.5

Loctite

648 Green Yes -55 to +175C > 25


Loctite660 Silver No -55 to +150C > 17.2

Loctite661 Amber No -55 to +175C > 15

Loctite662 Amber No -55 to +150C > 25

Loctite675 Green No -55 to +150C 20




31/158

Fixture timeon steel

Maximumdiametricalclearance

Pack sizes Comments

25 min. 0.1 mm 250ml High strength, low viscosity, small gaps

8 min. 0.1 mm 10ml, 50ml, 250ml, 1lt High strength, oil tolerant

80 min. 0.2 mm 250ml High strength, high temperature resistance

4 min. 0.25 mm 3ml, 50ml, 250ml High strength, general purpose

2 h 0.1 mm 250ml, 2lt High strength, good temperature resistance, slow

25 min. 0.1 mm 10ml, 50ml, 250ml Medium strength, if disassembly is required

3 min. 0.15 mm 50ml, 250ml, 2lt High strength, good temperature resistance

10 min. 0.1 mm 250ml High strength, no acrylic acid

15 min. 0.5 mm* 50ml High strength, gap fill for repair

4 min. 0.15 mm 250ml High strength, low viscosity, also UV-curing

7 min. 0.25 mm Not available in the U.K. High strength, medium viscosity, also UV-curing

45 min. 0.1 mm 250ml, 2lt High strength, slow curing

10 min. 0.15 mm 50ml, 250ml High strength, white MSDS, good temperature re

3 min. 0.25 mm 250ml, 1lt, 2lt High strength, good temperature resistance, high

Bonding

Instant Adhesives


32/158

Instant AdhesivesFor small to medium size parts

Choosing the right LoctiteInstant Adhesive:

Why use a LoctiteInstant Adhesive

Instant adhesives, or cyanoacrylates, cure very quickly whenhumidity on the substrates triggers the cure reaction, whichtowards the middle of the adhesive joint. Cyanoacrylates areextremely fast fixturing. Due to their limited gap filling capacalthough Loctite3090 2 component cyanoacrylate will fill gsubstrates is excellent and the bonding strength in shear annot be used on float glass or glazed ceramics, but can be usexposed to water need proper adhesive selection and aging

Advantages of LoctiteInstant Adhesives:

Clean and easy to apply

Very fast positioning and fixturing of parts

Joining a wide variety of dissimilar materials Excellent adhesion on a wide range of substrates, especia

formulations are available for bonding metals or porous suimprove adhesion on difficult-to-bond materials such as PP

High strength on very small bond faces

Free of solvents

Do not require complex part geometries, e.g.snap-fits

B di


33/158

Surface Preparation

Correct surface preparation is a key factor to assure the total success of any adhesive performance.

The surfaces to be bonded should be clean, dry and free of grease. If necessary, clean the partswith Loctite7063 or Loctite7070 and allow to dry (see Cleaning on page 102)

For faster fixture time, apply LoctiteActivator to one of the mating surfaces (see SurfacePreparation on page124)

To improve adhesion to difficult-to-bond materials (PP, PE, PTFE etc.), coat these bond facescompletely with Primer Loctite770 (see Surface Preparation on page 124)


Peristaltic Dispenser Loctite98548The peristaltic motion of the rotor provides volumetric dispensing of the adhesive directly fromthe bottle. The unit is designed mainly for manual work stations, but can also be integrated intoautomatic production lines. A precise amount of product can be set and high repetition accuracy isensured.

Semi-Automatic Dispensing System Loctite1388646The system is suitable for dispensing dots or beads of low to medium viscosity LoctiteInstant

Adhesives. It is designed for integration into automated assembly lines. The diaphragm valveprovides high-resolution stroke adjustment and achieves no-drip dispensing. The controller actuatesvalve, reservoir and start of operation via footswitch, keyboard or higher ranking PLC.

LoctiteInstant Adhesives are used for a wide variety of bonding applications. For some jobs it is sufficient to dispebottles designed specifically for easy and accurate dispensing.

In other cases, however, more precise hand-held or stationary automated dispensing is required. Loctitedispensin

application and use of our products fast, precise, clean and economical:

For information on semi- or fully automated dispensing equipment, available valves, spareparts, accessories and dispensing tips, please refer to page 142 or the LoctiteEquipmentSourcebook.

Bonding

Instant Adhesives


34/158

ClearLow viscosity Blac

Are you bonding diffi cult to bond rubbers or plastics, e.g. PE, PP,

Loctite

435Loctite406 Locti

480

L tit 435L tit 406 L tit 480

Handy Hints:

In combination with LoctiteInstant Adhesives: a) toimprove adhesion of difficultto bond materials useLoctite770 b) to increasecure speed use ActivatorLoctite7458, 7452 or 7457(see Surface Preparation on

Yes

Yes

Is the bond

Undefine

Fixture time 2 10 sec. 10 20 sec. 20 50

Viscosity 20 mPas 200 mPas 150 m

Colour Colourless Colourless Blac

Service temperature range -40 to +120C -40 to +100C -40 to +

Pack sizes 20g, 50g, 500g, 2kg 20g, 500g 20g, 5

Instant AdhesivesProduct table

Solution(with Primer 770)

Bonding


35/158

Low viscosity Medium viscosity Gel, non dripLow bloom, low

odour

Loctite

401Loctite

431Loctite

454Loctite

460

3 10 sec. 5 10 sec. 5 10 sec. 5 20 sec.

100 mPas 1,000 mPas Gel 40 mPas

Colourless Colourless Colourless Colourless

-40 to +120C -40 to +80C -40 to +120C -40 to +80C

3g, 20g, 50g, 500g 20g, 500g 10g, 20g, 300g 20g, 50g, 500g

L tit 401 L tit 431 L tit 460L tit 454

No

Defined small gaps < 0.15 mm

No

Subjected to shock or impact loads?

Varying gaps? Larger gaps?

Bonding

Instant Adhesives


36/158

Product list

ProductChemical

basisViscosity in

mPasColour Fixture time

PlaPoly

Loctite382 Ethyl 5,000 Colourless transparent 20 40 sec.

Loctite401 Ethyl 100 Colourless transparent 3 10 sec.

Loctite403 Alkoxy ethyl 1,200 Colourless transparent 5 20 sec.



Loctite408 Alkoxy ethyl 5 Colourless transparent 5 10 sec.

Loctite

409 Ethyl Gel Colourless transparent 20 60 sec. Loctite410 Ethyl 3,000 Black 30 60 sec.


Loctite415 Methyl 1,200 Colourless transparent 20 40 sec.







Loctite438 Ethyl 200 Black 10 20 sec.

Loctite454 Ethyl Gel Colourless transparent 5 10 sec.

Loctite460 Alkoxy ethyl 40 Colourless transparent 5 20 sec.

Bonding


37/158

Servicetemperature

range

Properties

Pack sizes CommentsPorous and/oracidic surfaces

Low odour/cosmeticappearance

Flexible/impactresistance

-40 to +80C / 20g, 500g, 2kg, Kit General purp

-40 to +120C 3g, 20g, 50g, 500g Universal, low

-40 to +80C / 20g, 50g, 500g Low bloom, l

-40 to +120C 20g, 50g, 500g, 2kg Plastics and

-40 to +100C 50g High tempera

-40 to +80C / 20g, 500g Low bloom, l

-40 to +80C 20g General purp

-40 to +80C / 20g Toughened, b

-40 to +80C 20g General purp

-40 to +80C 20g, 50g, 500g Metals, medi

-40 to +80C 20g, 50g, 500g General purp

-40 to +80C 20g, 500g, 2kg General purp

-40 to +80C 20g, 50g, 500g General purp

-40 to +80C 20g, 500g Plastics and

-40 to +80C 20g, 500g Universal, me

-40 to +100C / 20g, 500g Toughened, c

-40 to +100C / 20g, 500g Toughened, b

-40 to +120C 10g, 20g, 300g Universal, ge

-40 to +80C / 20g, 50g, 500g Low bloom, l

g

Instant Adhesives


38/158

well suited* in com

Med = Certified according to ISO 10993 for medical device manufacturing

Product list

ProductChemical

basisViscosity in

mPasColour Fixture time

PlaPoly

Loctite4031Med Alkoxy ethyl 1,200 Colourless transparent 20 60 sec.

Loctite4061Med Ethyl 20 Colourless transparent 2 10 sec.



Loctite4601Med Alkoxy ethyl 40 Colourless transparent 20 60 sec.

Loctite4850 Ethyl butyl 400 Colourless transparent 3 10 sec.

Loctite4860 Ethyl butyl 4,000 Colourless transparent 3 10 sec.

Bonding


39/158

Servicetemperature

range

Properties

Pack sizes CommentsPorous and/oracidic surfaces

Low odour/cosmeticappearance

Flexible/impactresistance

-40 to +80C / 454g Low bloom, l

-40 to +80C 20g, 454g Plastics and

-40 to +80C 20g, 50g, 500g Plastics and

-40 to +120C / 20g, 500g High tempera

-40 to +80C / 20g Low bloom, l

-40 to +80C / 20g, 500g Flexible, bend

-40 to +80C

/ 20g, 500g Flexible, bend

Light Cure Adhesives


40/158

In addition to their excellent bonding characteristics and tranunique processing advantages and compelling process costsufficient light of the appropriate wavelength, they cure veryin-line quality control and fast cycling to subsequent procesadhesives are available in various adhesive families.

Loctite

Light Cure Equipment is engineered to match the adradiation spectrum, and suit specific part size and manufact

LoctiteLight Cure Adhesive Technologies

Light cure acrylics offer the most extensive variety of propfeature a transparency equal to glass or clear plastics, and

Light cure silicones, which cure into soft, flexible thermosbonding, sealing and leak proofing

Light cure cyanoacrylates offer outstanding plastic bondin

low intensity light irradiation Light cure anaerobics show excellent metal bonding capa

resistance combined with shadow cure

Why use a LoctiteLight Cure Adhes

For fast processing

Advantages of LoctiteLight Cure Adhesives:

Quality assura Product prese

monitoring byfluorescence

Fast snap cur

100% in-line Monitoring fu

cure paramet

Cure on demand Material remains liquid

until exposed to lightsystems, then cures inseconds

Allows time to align partsprecisely prior to cure

Choice of cure systemdetermines cure time

High speed of cure Achieves high process

speeds for maximumthroughput

Fast cycling to subsequent

process steps

Optical clarity Ideal for bonding

clear and transparentsubstrates with perfectaesthetic finish

Greatly expands thedesign options

Bonding


41/158

Correct surface preparation is a key factor to the total success of any adhesive performance.

The surfaces to be bonded should be clean, dry and free of grease. If necessary, clean the parts with Loctite70(see Cleaning on page 102)

LoctiteAssureCureDetecting System

The LoctiteAssureCuresystem is a combination of newly developed adhesives, equipment andsoftware that together allow you to:

Quickly, accurately and precisely determine that your adhesive is fully cured in your bond line

Use with a range of LoctiteAssureCureAdhesives so that your application is matched with theright adhesive performance specifically for your needs

Benefit from less scrap, less QC testing time, faster production and the confidence of verified fullcure

For some jobs it is sufficient to dispense the product manually from the bottle onto the parts to be bonded. In other hand-held or stationary automated dispensing is required. Loctitedispensing equipment is specially designed to mproducts fast, precise, clean and economical:

Surface Preparation

Dispensing Equipment and Light Cure Systems

Semi-Automated Dispensing System Loctite1388647The system is suitable for dispensing dots or beads of low to medium viscosity Loctitelight

cure adhesives, and is designed for integration into automated assembly lines.The reservoiraccommodates up to 1.0 litre Loctitebottles. The controller actuates the valve, reservoir and startof operation via footswitch, keyboard or higher ranking PLC. An airline filter/regulator is included toprovide filtered air supply.

P d bl



42/158

Ultra clearCapillary Fast c

Loctite3491

Loctite3081

Locti349

Glass and other substrates

Is a shadow area created by a non-transparent substrate? Is a sec

shadow areas?

Are you bonding glass?

Product table

Chemistry Acrylic Acrylic Acry

Viscosity 100 mPas 1,100 mPas 6,000 m

Colour Clear Clear Clea

Fluorescence Yes No No

Service temperature range -40 to +120C -40 to +130C -40 to +

Pack sizes 25ml, 1lt 25ml, 1lt 25ml,

Solution

Bonding


43/158

Acrylic Acrylic Acrylic Cyanoacrylate

5,500 mPas 15,000 mPas 1,000 mPas 20 mPas

Transparent, colourless Clear Transparent, yellow Transparent, pale gre

Yes No Yes No

-40 to +150C -40 to +140C -40 to +100C -40 to +100C

25ml, 1lt 25ml, 1lt 25ml, 1lt 28g, 1lb

High viscosity Toughened Very fast Instant adhesive

Loctite3926

Loctite3525

Loctite3555

Loctite4304

No glass

bendable/deformable High strength High strength

Product list



44/158

Product list

Product/gradeChemical

basis

Suitablewavelengths

for cure

Secondarycure system

Viscosity inmPas

Servicetemperature

range inC

cu

Loctite322 Acrylic UV No 5,500 -40 to +100

Loctite350 Acrylic UV No 4,500 -40 to +120

Loctite352 Acrylic UVActivator

707515,000 -40 to +150

Loctite3011Med Acrylic UV No 110 -40 to +100

Loctite3081Med Acrylic UV No 100 -40 to +120

Loctite3211Med

Loctite3103Acrylic UV/VIS No 10,000 thixo. -40 to +140

Loctite3301Med Acrylic UV/VIS No 160 -40 to +130

Loctite3311Med

Loctite3105 Acrylic UV/VIS No 300 -40 to +130

Loctite3321MedLoctite3106

Acrylic UV/VIS No 5,500 -40 to +150


Loctite3345Med Acrylic UV No 1,500 -40 to +120

Loctite3381Med Acrylic UV No 5,100 -40 to +130

Loctite 3491 Acrylic UV No 1 100 40 to +130

Bonding


45/158

Tack-freetime* in sec.

Fixturingtime** in sec.

Shorehardness

Substrates

Pack sizes Comme

Glass Plastics Metals Ceramics

4 10 D 68 250ml, 1lt Fast sur

20 15 D 70 50ml, 250ml High hu

17 10 D 60 50ml, 250mlHigh hutoughen

8 10 D 68 Not available in

the U.K.Fast sur

8 10 D 74 25ml, 1lt Fast sur

>30 12 D 51 25ml, 1lt For stre

>30 12 D 69 25ml For stre



15 8 D 27 1lt Highly f

30 15 D 70

Not available in

the U.K.High hu

>30 30 A 72 25ml, 1lt Highly f

15 12 D 75 25ml 1lt High tra

Product list



46/158

Product list

Product/gradeChemical

basis

Suitablewavelengths

for cure

Secondarycure system

Viscosity inmPas

Servicetemperature

range inC

cu

Loctite3555Med Acrylic UV/VIS No 1,000 -40 to +100




Loctite

3924AC Acrylic UV/VIS No 800 1,400 -40 to +100



Loctite

3972 Acrylic UV/VIS No 4,600 -40 to +100

Loctite4304Med Cyano-acrylate UV/VISSurfacemoisture

20 -40 to +100

Loctite4305Med Cyano-acrylate UV/VISSurfacemoisture

900 -40 to +100

Loctite5083 Silicone UVAtmospheric

moistureThixo. paste -60 to +200

Loctite5088 /Loctite5248Med

Silicone UVAtmospheric

moisture65,000 -60 to +200

Loctite 5091 Silicone UVAtmospheric

5 000 60 to +180

Bonding


47/158

Tack-freetime* in sec.

Fixturingtime** in sec.

Shorehardness

Substrates

Pack sizes Comme

Glass Plastics Metals Ceramics

10 5 D 77 25ml, 1lt Fast cusubstra

10 5 D 68 25ml, 1ltFast cusubstra



>60 30 3 D 57 25ml, 1lt For stre


5 5 D 68

Not available in

the U.K. Fast cu

30 >30 A 30 Not available inthe U.K. Highly f

30 >30 A 34 300ml Highly f

Hotmelt AdhesivesSolutions for fast processing applications


48/158

Solutions for fast processing applications

Hotmelt adhesives are available in solid form as granules, curaw material groups, such as ethylene vinyl acetate copolymcopolymer (PO).

Reactive hotmelt adhesives based on polyurethane (PU hotmreaction after cooling.

Hotmelts are used for rapid initial strength Are applied by means of special equipment or hot melt gu

Hotmelt adhesives were developed to bond a variety of subsThese adhesives can handle todays toughest applications inideal for applications that require high-speed manufacturingfast green strength, and minimal shrinkage.

Hotmelt adhesives offer many benefits open times rangingneed for clamps or fixtures, long-term durability and excelleand temperature extremes.

Hotmelt products are solvent-free.

Why use a Henkel Hotmelt Adhesive

Advantages Hotmelt in general

High manufacturing speed (short setting time)

Process can be easily automated Combination of adhesives and sealants

Advantages Polyamide Hotmelts (PA) Advantages Polyolefi

Bonding


49/158

Key factors to consider when choosing the right product

Surface Preparation

Equipment

Temperature resistanceHotmelt systems covering different service temperature ranges. Temperature resistance up to +150C can be achie

Adhesion to different substratesThere are hotmelt systems available for bonding polar and/or non-polar substrates. They will bond different plastics

Chemical resistanceHotmelt systems also provide excellent chemical resistance. Products are available for use in contact with oils, clea

StrengthsThermoplastic hotmelts reach their final strength immediately after cooling. At elevated temperatures they soften aas resins in hotmelt moulding processes. Polyurethane hotmelts are cross-linked with moisture to form a thermosere-shaped after it is cured.

Product safety of reactive hotmeltsPurmelt ME (MicroEmission) is a PU hotmelt adhesive innovation. These products do not need to be labeled as haza

They contain less than < 0.1% of monomeric isocyanate. This is below the limit currently specified as harmful to hEU member states.

Purmelt ME is a new PU hotmelt adhesive product line.

Surfaces should be clean and free from grease. Corona or plasma pre-treatment will improve adhesion to plastic supreheated to improve adhesion.

Glue guns for processing sticks, cartridges or granules offer simple hand-held application solutions.A wide range of different melting units is available for semi- or fully automated productionenvironments. Drum unloaders and adhesive extruders are recommended for very high volumeapplications. Roller coaters are suitable for applying hotmelt coatings.

E i t l i

Product table

Hotmelt Adhesives


50/158

Wide range ofadhesion

Pressure-sensitiveMacromould

TechnomeltQ 8707

Macromelt6238

MacroOM 6

Thermoplastic setting

Rubber Polyamide

Chemical base

Solution

Product table

TechnomeltQ 8707

Density 1.0 g/cm 0.98 g/cm 0.98 g/

Softening temperature +105 to +115C +133 to +145C +150 to +

Application temperaturerange +150 to +180C +180 to +220C +180 to +

Open time Pressure-sensitive Short Sho

Melt viscosity in mPas at+130C


21,000 33,000


3,200 4,800 10,000 16,000 8,60

Pack sizesca. 15kg carton

(cushion)20kg bag (granules) 20kg bag (g

Handy Hints:

Bonding


51/158

1.0 g/cm 1.0 g/cm 1.15 g/cm 1.13 1.23 g/cm

+99 to +109C +82 to +90C

+160 to +180C +170 to +190C +130 to +150C +110 to +140C

Very short Short 4 8 min. 4 8 min.

17,000 23,000 10,000 6,000 12,000

6,600 8,800 24,000 30,000

3,800 5,800

25kg bag (granules)10kg stick

(11.3mm diameter)16kg 2kg candle, 190kg dru

Granules Sticks Multi purpose Multi purpose

TechnomeltQ 3113

TechnomeltQ 9268H

PurmeltME 4655*

PurmeltQR 4663

Thermoplastic setting & Che

Chemical base

Ethylene vinyl acetate Polyurethane

Long open time

MicroEmission S

Technomelt Q 9268H

Product list

Hotmelt Adhesives


52/158

Product Chemical basis ColourDensity in g/cm3

(approx.)Vis

Macromelt OM 652 Polyamide Amber 0.98 9

Macromelt OM 657 Polyamide Black 0.98 8

Macromelt OM 673 Polyamide Amber 0.98 3

Macromelt OM 678 Polyamide Lack 0.98 3

Macromelt 6208 S Polyamide Black 0.98 3

Macromelt 6238 Polyamide Amber 0.98 7

Technomelt PS-M 8783 Pressure-sensitive Amber 125

Technomelt Q 3113 Ethylene vinyl acetate White 1 3,800

Technomelt Q 3183 Ethylene vinyl acetate Yellowish 1 500

Technomelt Q 4203 Polyolefine Opaque 0.8932

Technomelt Q 4209 Polyolefine Opaque 0.8927

Technomelt Q 5374 Polyolefine Amber 0.95 2,250

Technomelt Q 8707 Pressure-sensitive Amber 1 3,200

Technomelt Q 9268 H Ethylene vinyl acetate White 124

Bonding


53/158

Softening pointApplicationtemperature

Pack sizes Comments

+155C +180 to +230C 20kg bag Macromelt moulding, UL- listin




+155C +180 to +230C 20kg bag Wide range of adhesion

+139C +180 to +220C 20kg bag Wide range of adhesion

+132 to +142C +160 to +180C 8kg carton Pressure sensitive adhesive, hi

+99 to +109C +160 to +180C 25kg bag Filtration, pleat stabilisation, se

+103 to +113C +160 to +180C 25kg bag Filtration, sealing of sewing ho

+160 to +170C +180 to +200C 20kg bag Filtration, high temperature res

+155 to +165C +180 to +200C 25kg bag Filtration, high temperature res

+99 to +109C +160 to +200C ca. 13.5kg carton General assembly, good adhes

+105 to +115C +150 to +180C ca. 15kg carton Pressure sensitive adhesive, go

+82 to +90C +170 to +190C 10kg stick (11.3 mm diameter) Hotmelt sticks

Contact adhesive with good initial strength

Solvent-based / Water-based Adhesives


54/158

Solvent-based adhesivesSolvent-based adhesives (polychloroprene) are formulated with raw material groups including natural and synthcombinations (naphthas, ketones, esters or aromatics). Adhesive films will be formed upon evaporation of solvebonding (adhesive application to both surfaces) or wet bonding (applied to one of the bond faces).

Most of the contact adhesives are-based on polychloroprene rubber. They display good initial strength and achie

Terokal 2444 can be applied by brush and spatula. It is used to bond rubber to different surfaces e.g.metal, wood and to itself. Terokal 2444 offers high initial bond strength and contactability. The bondlineis flexible and provides good temperature resistance up to 90C.

Macroplast B 2140 is a solvent-based contact adhesive based on polychloroprene. The productexhibits good high-temperature strength and the ability to bond various substrates to one another.Macroplast B 2140 is suitable for spray application and is particularly useful when bonds have towithstand temperatures up to 120C.

Water-based or dispersion adhesives contain insoluble resins which are finely distributed as solid particles in of water. Crosslinking of the dispersed particles is achieved by adding mainly basic catalysts. As a result, the resheat is greatly improved.

As a rule, dispersion adhesives do not contain solvents or other problematic chemicals, they are not harmful to regard to health and safety at work. Dispersion adhesives are applied by means of rollers or handguns. Setting applying additional heat incl. air ventilation.

Water-based products with improved bonding characteristics

Terokal 2444

Macroplast B 2140

Bonding


55/158

Macroplast B 2140

Adhesin A 7088Terokal 2444

High strength

Terokal2444

MacroplastB 2140

AdhesinA 7088

Solvent-based adhesive Water-b

Hand application Spray application Tack-free

M o l t B 2140

Polystyrene foam

Bonding of insulating honeycombsto galvanised steel sheet Laminating of paper to polystyrene

T ok l 2444 Adh in A 7088

Technology Solvent-based adhesive Solvent-based adhesive Water-based adhesiv

Chemical base Polychloroprene Polychloroprene Dispersion

Solids contents ca. 30% 15 18% 57 61%

Viscosity ca. 3,000 mPas ca. 140 300 mPas 4,000 6,000 mPas

pH-value 3 5

Service temperaturerange

-30 to +90C (100C) -30 to +120C (130C)

Usage 150 300 g/m

2

150 250 g/m

2

Density ca. 0.89 g/cm3 0.78 0.88 g/cm3

Colour Beige Beige White

Pack sizes 340g, 5kg Not available in the U.K. 30kg

Solution

Handy Hints:

Solvent-based Adhesives

To improve adhesion onrubber it`s recommendedto abrade and clean thesurfaces prior to bonding

Water-based Adhesives Working tools can be cleaned

with water

Structural BondingFor demanding requirements


56/158

Why use a Henkel Adhesive for Struc

The Henkel range of Structural Bonding products offers a wirequirements and conditions that apply to industrial design a

Bonding:

Adhesive bonding is a process in which two similar or dissim

an adhesive.Adhesives build bridges between the surfaces of substrat

To achieve the optimal bonding result, the following pre Compatibility of the adhesive with the materials to be bon

Compatibility of the adhesive with the specified requireme

Correct application and curing of the adhesive

Advantages of bonding compared to conventional joining methods:

More uniform stress distribution over the entire bond face:This has a very positive effect on the static and dynamic strength achieved. Where welding and riveting resulbonding achieves a more uniform distribution of stress loads.

No change in surface and structure of the joined materials:Welding temperatures may change the structure and therefore the mechanical properties of materials. In addthe visual appearance of the parts.

Weight saving:Adhesives are particularly popular for light-weight components as the load is spread across the bond area an

Sealed joints:Adhesives also act as sealants, preventing loss of pressure or liquids, blocking the penetration of condensatio

Joining dissimilar materials and reducing the risk of corrosion:

Bonding


57/158

Rigid Bonding

Elastic Bonding

Available Technologies

Rigid adhesives are mainly used for high load transmission to replace common mechanical joining methods. Two pcould be considered as structurally linked. Mechanical characteristics like high strength, high modulus and high adcustomer applications in demanding industries like aerospace and automotive.

Rigid bonding offers significant benefits for the users: Simplifies construction by increasing strength/rigidity for load transmission

Prevents material fatigue and failure by achieving more uniform transmission of loads (stressdistribution) and by maintaining the structural integrity (no thermal or mechanical weakeningof parts)

Saves production costs by replacing conventional mechanical fasteners (screws, rivets or welding)

Saves material cost and saves weight by reducing material thickness while maintaining loadtransmission characteristics

Allows varied substrate combinations, e.g. metal/plastics, metal/glass, metal/wood etc.

Elastic adhesives are selected mainly for their capability to elastically absorb and tolerate dynamic stresses, in addproperties of the adhesive assembly. Besides their elastic properties, many elastic adhesives from Henkel exhibit aa relatively high modulus, achieving friction-locked joints which, at the same time, have elastic properties.

Elastic bonding offers significant benefits for the users: Simplifies construction by increasing strength/rigidity to withstand dynamic loads

Prevents material fatigue and failure by achieving uniform transmission of the load (stressdistribution) and by maintaining the structural integrity (no thermal or mechanical weakeningof parts)

Saves production costs by replacing conventional mechanical fasteners (screws, rivets or welding)

Allows varied substrate combinations, e.g. metal/plastics, metal/glass, metal/wood etc.

Reduces and/or compensates stress caused by differential thermal expansion of joint substrates

Photovolt

Stress an

Structural Bonding EpoxiesProduct table


58/158

What is your focus?

General bonding

High viscosity Flowable

LoctiteHysol

3423 A&BLoctiteHysol

9483 A&BSolution

Description 2K-Epoxy 2K-Epoxy

Mix ratio by volume (A:B) 1:1 2:1

Mix ratio by weight (A:B) 100:70 100:46

Working life 45min. 30min.

Fixture time 180min. 210min.

Colour Grey Ultra clear

Viscosity 300,000mPas 7,000mPas

Shear strength (GBMS) 17N/mm 23N/m

Peel strength (GBMS) 2.7N/mm 1.5N/mm

Service temperature range -55 to +120C -55 to +150C

Bonding


59/158

2K-Epoxy 2K-Epoxy 1K-Epoxy

2:1 2:1

100:46.5 100:50

110min. 60min. 5min.*

270min. 180min. 30min.**

Off-white Yellowish Grey

8,700mPas 35,000mPas 45,000mPas

24N/mm 37N/mm 46N/mm

0.4N/mm 8N/mm 9.5N/mm

-55 to +120C -55 to +120C -55 to +200C

Food approved Toughened High tem

Food contact High technical performance

LoctiteHysol

9480 A&BLoctiteHysol

9514LoctiteHysol

9466 A&B

Product list

Structural Bonding Epoxies


60/158

Product TechnologyColour

mixViscosity in

mPasMix ratio by

volumeWorking

LoctiteHysol3421 2K-Epoxy Clear amber 37,000 1:1 30 150

LoctiteHysol3423 2K-Epoxy Grey 300,000 1:1 30 60m

LoctiteHysol3425 2K-Epoxy Yellow / white 1,350,000 1:1 55 105

LoctiteHysol3430 2K-Epoxy Ultra clear 23,000 1:1 5 10m


Loctite

Hysol

3455 2K-Epoxy Grey Pasty 1:1 40min

LoctiteHysol9450 2K-Epoxy Translucent 200,000 1:1 2 7m

LoctiteHysol9461 2K-Epoxy Grey 72,000 1:1 40min


LoctiteHysol9466 2K-Epoxy Yellowish 35,000 2:1 60min

LoctiteHysol9480 2K-Epoxy Off-white 8,700 2:1 110 190

LoctiteHysol9483 2K-Epoxy Ultra clear 7,000 2:1 25 60m

LoctiteHysol9489 2K-Epoxy Grey 45,000 1:1 60 120

LoctiteHysol9492 2K-Epoxy White 30,000 2:1 15min

LoctiteHysol9497 2K-Epoxy Grey 12,000 2:1 165 255

Bonding


61/158

TensilestrengthN/mm

Peel strengthN/mm

Pack sizes Comments

28 2 3 50ml, 200ml, 1kg Structural adhesive, general purpose, long open time

24 2 3 50ml, 1kg Multiple purpose bonder, excellent for metals, good

27 1.5 2.5 50ml, 200ml Multiple purpose bonder, excellent for metals, for lar

36 3 24ml, 50ml, 200ml, 400ml Multiple purpose bonder, fast, ultra clear

25ml Structural adhesive, fast cure, ideal for metal repair

Not available in the U.K. Structural adhesive, fast, high viscosity

17 0.6 50ml, 200ml, 1kg Multiple purpose bonder, fast (5min.), gap filling, tra

30 10 50ml, 400ml, 1kg, 20kg Structural adhesive, toughened, gap filling

7 10 50ml, 400ml, 1kg Structural adhesive, toughened, gap filling, fast cure

32 8 50ml, 400ml Toughened multiple purpose bonder, high bonding st

47 0.4 50ml, 400ml Multiple purpose bonder, approved for incidental foo

47 1.5 50ml, 400ml, 1kg Multiple purpose bonder, ultra clear, excellent for pa

14 2.2 50ml Structural adhesive, general purpose, extended work

31 1.6 50ml, 400ml Structural adhesive, high temperature resistant

52.6 50ml, 400mlHigh temperature resistant, thermally conductive, excomponents (thixotropic)

Structural Bonding AcrylicsProduct table


62/158

General purpose General p

1-compone

Loctite

330Locti

F24

Loctite 330 Loctite F246

Solution

Description No mix No m

Activator 7388 or 7386 Ini No. 1

Mix ratio by volume (A:B)

Colour Pale yellow Off-w

Viscosity 67,500mPas 30,000m

Working life

Fixture time 3min. 0.5 1

Shear strength (GBMS) 15 30N/mm2 35N/m

Service temperature (up to) +100C +120

Pack sizes50ml kit, 50ml tube,

315ml, 5lt, 200lt50ml kit, 32

Bonding


63/158

Glass bonding Magnet bonding General purpose Clear bond line

2-component ac

Loctite

3298Loctite

326Loctite

3295Loctite

V5004

No mix No mix Premix Premix

7386 7649

1:1 1:1

Green-grey Yellow to amber Green Pale mauve, clear

29,000mPas 18,000mPas 17,000mPas 18,000mPas

4min. 0.5min.

3min. 3min. 5 10min. 3min.

26 30N/mm2 15N/mm2 25N/mm2 21N/mm2

+120C +120C +120C +80C

300ml 50ml, 250ml 50ml, 600ml 50ml, 20lt

Loctite 3298 Loctite 326 Loctite V5004Loctite 3295

Product list

Structural Bonding Acrylics


64/158

Product Description ActivatorMix ratio byvolume (A:B)

Colour

Loctite319 No mix Loctite7649 Light amber

Loctite326 No mix Loctite7649 Yellow to amber

Loctite329 No mix Loctite7386 Light straw

Loctite330 No mix Loctite7388 Pale yellow

Loctite366 No mix Loctite7649 Yellow to amber

Loctite

3038 Premix 1:10 Yellow

Loctite3295 Premix 1:1 Green

Loctite3298 No mix Loctite7386 Green-grey

Loctite3342 No mix Loctite7386 Yellow opaque

Loctite3504 No mix Loctite7649 Amber

LoctiteF245 No mix Ini No. 1, No. 5 Off-white

LoctiteF246 No mix Ini No. 1, No. 5 Off-white

LoctiteV1305 Premix 1:1 Off-white

LoctiteV1315 Premix 1:1 Off-white

LoctiteV5004 Premix 1:1 Pale mauve, clear

Bonding


65/158

Fixture time inmin.

Shear strength(GBMS) N/mm2

Servicetemperature

(up to) CPack sizes Comments

1 10 120 Not available in the U.K. Glass-metal bonder

3 15 120 50ml, 250ml Magnet bonder

1 20 100 315ml, 1lt, 5lt Fast fixture

3 15 30 10050ml kit, 50ml tube,

315ml, 5lt, 200ltGeneral purpose

N.A. 13.5 120 250ml Additional UV cure

> 40 13 (PBT) 100 50ml, 490ml PO bonder

5 10 25 120 50ml, 600ml General purpose

3 26 30 120 300ml Glass bonding

1 1.5 15 30 180 300ml High temperature

N.A. 22 120 50ml, 250ml Additional UV cure

0.5 1 25 100 320ml, 5lt Low odour

0.5 1 35 120 50ml kit, 320ml, 5lt General purpose

5 21 120 50ml Faster version of LoctiteV131

15 15 120 50ml Composite/plastic bonding

3 21 80 50ml, 20lt Clear bondline

Product table

Structural Bonding Polyurethanes


66/158

General purpose Fast cu

MacroplastUR 7221

MacroUR 72

Large surfac

1-component

Gap variation tolerance

Solution

Technology 1K-PU 1K-P

Viscosity 5,500 10,500mPas 5,500 10,5

Initial strength 2 4h 10 15

Curing time 2d 1d

Tensile shear strength > 6N/mm > 6N/m

Service temperature range (short exposure) -40 to +80C (+100C) -40 to +80C

Pack sizes Not available in the U.K. 30kg jerr

Handy Hints:

Macroplast B 8040 is used for cleaning tanks, pumps, hoses andmixing heads of metering equipment

Loctite7515 can be used to increase aging resistant ofPolyurethane adhesives on metals in humid conditions. For furtherinformation please refer to the TDS.

Refill working packs into new buckets to prevent applying unmixed

SealingBonding


67/158

2K-PU 1K-PU 2K-PU 2K-PU

8,000 10,000mPas Pasty 250,000 310,000mPas 400,000 500,000mPa

8 10h 1 h/4h* 3 4h 40 60min.

5 7d 5 7d 5 7d 2 3d

> 12N/mm > 5N/mm2at 5mm layer > 12N/mm > 10N/mm

-190 to +80C (+150C) -40 to +90C (+120C) -40 to +80C (+150C) -40 to +80C (+100C

24kg pail310ml cartridge,

400ml foil, 570ml foil,set

3.6kg combi pack 415ml twin cartridge

Good adhesion toplastics

Low temperatureresistance

Elastic bonding Primerless adhesion

MacroplastUK 8202

Terostat8597 HMLC

MacroplastUK 8326 B30

MacroplastUK 1366 B10

Structural bonding

1-component

Gap filling

2-component

NEW

Product list (2-component)



68/158

Product Technology Viscosity in mPasMix ratio by

weightWorking life a

20C in min

Macroplast UK 1351 B25 2K-PU 400,000 500,000 2:1vol. 20 30

Macroplast UK 1366 B10 2K-PU 400,000 500,000 4:1vol. 7 13

Macroplast UK 8101* 2K-PU Liquid 4:1 50 70

Macroplast UK 8103* 2K-PU 8,000 10,000 5:1 40 70

Macroplast UK 8115-23* 2K-PU 700 1,200 5:1 80 105

Macroplast UK 8126* 2K-PU 300 900 100:65 45 70

Macroplast UK 8160* 2K-PU Pasty 5:1 60 90

Macroplast UK 8202* 2K-PU 8,000 10,000 4:1 80 120

Macroplast UK 8303 B60* 2K-PU 200,000 300,000 6:1 60 75


Macroplast UK 8309* 2K-PU 850,000 5:1 40 60


SealingBonding


69/158

Consumptionper m2

Service temperaturerange (short exposure)

Pack sizes Comments

-40 to +120C (150C) 400ml twin cartridgePasty/sag resistant, high strength, higtempering necessary, GL approved asRules for Classification and Construct

-40 to +80C (+100C) 415ml twin cartridge Pasty/sag resistant, short fixture timeplastics and metal, shock absorbent

200 400g -40 to +80C (+150C) Not available in the U.K. Low viscous

200 400g -40 to +80C (+150C) 24kg pailLow viscous, multi purpose, differentflow properties, IMO approval for shipspread)

200 500g -40 to +80C (+150C) Not available in the U.K.Low viscous, very long open time, hyapplications

-40 to +80C (+150C) Not available in the U.K.Low viscous, good penetration propesnowboard industry

200 500g-190 to +80C

(+150C)Not available in the U.K. Very pasty, IMO approval for shipbuil

200 400g-190 to +80C

(+150C)24kg pail

Liquid, good flexibility at low temperaapproval (shipbuilding), Bureau Verita

200 500g -40 to +80C (+150C) Not available in the U.K.Multi purpose, pasty/sag resistant, Dshipbuilding (wheelmark, low flame s

200 500g -40 to +80C (+150C) Not available in the U.K.Pasty/sag resistant, high strength andlife versions available

200 500g -40 to +80C (+150C) 30kg pail Pasty/sag resistant, good workability

200 500g -40 to +80C (+150C) 3.6kg combi pack** Pasty/sag resistant, primerless metal

Product list (1-component)



70/158

Cleaner:Macroplast B 8040 (viscosity - 3mPas) in 30kg pack. Rinsing and cleaning agent for1K- and 2K-polyurethane adhesives / high dissolving capacity / low evaporation rate.

Product TechnologyViscosity in

mPasOpen time

at 23C, 50% rhInitial strength

Macroplast UR 7220 1K-PU 5,500 10,500 4 6h 6 10h

Macroplast UR 7221 1K-PU 5,500 10,500 40 60min. 2 4h

Macroplast UR 7225 1K-PU 5,500 10,500 20 25min. 50 70min.



Macroplast UR 7395 B-21 1K-PU 2,000 4,000 12 15min. 20 30min.


Terostat 8596 1K-PU Pasty 25min. 6h*

Terostat 8597 HMLC 1K-PU Pasty 20min. 1h / 4h*

Terostat 8599 HMLC 1K-PU Pasty 15min. 15min.*

Terostat 9097 PL HMLC 1K-PU Pasty 25min. 1h*

NEW

SealingBonding


71/158

Consumptionper m2

Service temperature range(short exposure)

Pack sizes Comments

100 200g -40 to +80C (+100C) Not available in the U.K. Very long open time for large panel a

100 200g -40 to +80C (+100C)30kg jerry can, 200kg drum, Long open time, foaming, IMO approv

flame spread)

100 200g -40 to +80C (+100C) 1,000kg containerMedium open time, foaming, IMO applow flame spread)

100 200g -40 to +80C (+100C) 30kg jerry canShort fixture time, foaming, IMO apprlow flame spread)

100 200g -40 to +80C (+100C) Not available in the U.K. Low viscous, fast setting

100 200g -40 to +80C (+100C) Not available in the U.K.Low viscous, thermally accelerated, I(wheelmark, low flame spread)

100 200g -40 to +80C (+100C) Not available in the U.K. Low viscous, thermally accelerated, m

-40 to +90C (+120C) 310ml cartridge, set 6 hours drive away time acc. FMVSS

-40 to +90C (+120C)310ml cartridge, 400ml foil,

570ml foil, setHigh modulus, low conductivity, 1 hou4 hours drive away time acc. to Europ

-40 to +90C (+120C) 310ml cartridge, setWarm applied, high modulus, low contime acc. FMVSS

-40 to +90C (+120C) 310ml cartridge, setPrimerless adhesion, high modulus, lotime acc. FMVSS

Structural Bonding SiliconesProduct table


72/158

Do you need a fast fixture / fast cure adhesive?

Yes

Fast cure Medium cure

Loctite

5615 A&BLoctite

5607 A&BSolution

Description 2K Alkoxy silicone 2K Alkoxy silicone

Mix ratio by volume (A:B) 2:1 2:1

Colour Black Grey

Mix tip working life (static mixer) 2 3min. 5 7min.

Skin formation time

Fixture time 10 15min. 50min.

Elongation at break 230% 140%

Hardness shore A 34 43

Shear strength (GBMS) 1.3N/mm 1.55N/mm

Service temperature (up to) +180C +180C

Pack sizes 400ml, 17lt 400ml, 17lt

Handy Hints:

To improve adhesion on difficult to bondmaterials, we recommend to use cleaner/ adhesion promoter Terostat 450 or

SealingBonding


73/158

General purpose Electrical components Oil resistance

No

Loctite

5366Loctite

5970Loctite

5145

1K Acetoxy silicone 1K Alkoxy silicone 1K Alkoxy silicone

Clear Clear Black

5min. 70min. 25min.

530% 500% 200%

25 25 44

2.5N/mm 3.5N/mm 1.5N/mm

+250C +200C +200C

50ml, 310ml 40ml 50ml, 300ml, 20lt

Product list

Structural Bonding Silicones


74/158

Product DescriptionMix ratio by

volumeA:B

Colour

Mix tip woring life (sta

mixer)min.

Loctite5145 1K Alkoxy silicone Clear

Loctite5366 1K Acetoxy silicone Clear

Loctite5367 1K Acetoxy silicone White

Loctite5368 1K Acetoxy silicone Black

Loctite5398 1K Acetoxy silicone Red

Loctite5399 1K Acetoxy silicone Red

Loctite5404 1K Heat curing silicone White to grey

Loctite5607 2K Alkoxy silicone 2:1 Grey 5 7

Loctite5610 2K Alkoxy silicone 2:1 Black 1 2

Loctite5612 2K Alkoxy silicone 4:1 Red 4 5

Loctite5615 2K Alkoxy silicone 2:1 Black 2 3

Loctite5616 2K Alkoxy silicone 2:1 White 2 3

Loctite5940 1K Acetoxy silicone Black

Loctite5970 1K Alkoxy silicone Black

Loctite5980 1K Alkoxy silicone Black

SealingBonding


75/158

Elongation atbreak

%Hardness shore A

Shear strength(GBMS)N/mm

Service tempera-ture

(up to)C

Pack sizes Commen

500 25 3.5 200 40ml For electr

530 25 2.5 250 310ml General p

500 20 2 250 310ml General p

435 26 2.2 250 310ml General p

200 35 2 300 310ml Flowable

500 33 3.3 300 310ml High temp

65 60 1.3 N.A. 300ml Thermal c

140 43 1.55 180 400ml, 17lt Medium c

210 40 1.35 180 400ml Very fast c

180 45 2.0 220 400ml, 17lt Higher tem

230 34 1.3 180 400ml, 17lt Fast curin

200 30 1.0 180 Not available in the U.K. White vers

500 22 1.8 200 100ml High elong

200 44 1.5 200 300ml, 20lt Very good

290 27 1.4 -55 to +200 200mlExcellent not requir

Product table

Structural Bonding Silane Modified Polym


76/158

General purpose H

TerostatMS 930

TerosMS 5

What main function are you looking for?

Elastic s

Solution

Colour White, grey, black Blac

Consistency Pasty, thixotropic Pasty, thix

Hardness shore A (DIN EN ISO 868) 30 45

Depth of cure after 24 hr 4mm 3 4m

Skin formation time 25 40min. 10 20

Tensile strength (DIN 53504) 1.0MPa 1.6M

Elongation at break (DIN 53504) 250% 210%


Pack sizes 310ml, 570ml, 18lt Not available

Handy Hints:

To improve adhesion on materials difficult to bond please use

cleaner/adhesion promoter Terostat 450 or Corona/Plasmatreatment

To increase cure speed all Terostat MS products (except MS 9399)can be accelerated by using the B-component Terostat MS 9371Bwith a mix ratio of 10:1

A li ti f T t t MS d t l ti h PMMA

SealingBonding


77/158

General purpose Flame retardant High modulusSelf spreading

TerostatMS 931

TerostatMS 939

TerostatMS 939 FR

TerostatMS 9380

Elastic bonding

White, grey, blackWhite, off-white, grey,

blackBlack White, grey

Self-levelling Pasty, thixotropic Pasty, thixotropic Pasty, thixotropic

25 55 > 50 > 65

3 4mm 3mm 3mm 3mm

15 20min. 10min. 20min. 5 10min.

0.8MPa 3.0MPa 3.5MPa 4.0MPa

100% 250% 180% 120%

-40 to +100C -40 to +100C -40 to +100C -40 to +100C

Not available in the U.K. 310ml, 570ml, 25kg 310ml, 25kg 310ml, 25kg

Product list

Structural Bonding Silane Modified Polym


78/158

Cleaner:Terostat 450 alcohol solution designed for cleaning and to improve adhesion (thin fluid,colourless)

B-Component (Hardener) for 2-component curing:Terostat MS 9371 B accelerator paste for Terostat MS adhesives and sealants (pasty,

NEW

Product Colour ConsistencyHardness shore A(DIN EN ISO 868)

Depth of curein mm

after 24h

Terostat MS 510 BlackPasty,

thixotropic45 3 4

Terostat MS 647 White, black Pasty, thixotropic 60 3

Terostat MS 930 White, grey, black Pasty, thixotropic 30 4

Terostat MS 931 White, grey, black Self-levelling 25 3 4



Terostat MS 939White, off-white, grey,

blackPasty, thixotropic 55 3

Terostat MS 939 FR Black Pasty, thixotropic > 50 3

Terostat MS 9302 Grey, brown Thixotropic 30 3 4

Terostat MS 9360 Black Pasty, thixotropic > 50 3

Terostat MS 9380 White, grey Pasty, thixotropic > 65 3

Terostat MS 9399 White, grey, black Pasty, thixotropic 60 2K-system

SealingBonding


79/158

*only available in white colour,**Available in white, grey, black

Elongationat break

(DIN 53504)in %

Servicetemperature

rangePack sizes Comments / speciality

210 -50 to +100CNot available in

the U.K.Unique fast curing as 2K, damp heat test acc. IEC 61215/QMFZ2


the U.K.Unique fast curing as 2K, damp heat test acc. IEC 61215/

250 -50 to +80C310ml, 570ml,

18ltFDA, BSS 7239, UL Listing QMFZ2


the U.K.Sensoric test acc. to DIN 10955

230 -40 to +100C 310ml, 570mlSensoric test acc. to DIN 10955, declaration of no objectiofungus resistance, IMO approval

220 -40 to +100C310ml, 570ml,

18lt

DIN EN ISO 846 (VDI 6022)

250 -40 to +100C310ml, 570ml,

25kgUL Listing, QOQW2, damp heat test acc. IEC 61215/61646

180 -40 to +100C 310ml, 25kg Flame retardant approvals (railway), DIN 5510 S4, NF F 1


the U.K.DIN EN ISO 846 (VDI 6022)

200 -40 to +100C 310ml, 25kg ASTM E 662 ASTM E 162 BSS 7239

120 -40 to +100C 310ml, 25kgGL (Germanischer Lloyd) approved elastomeric adhesive. 61215/61646/61730 > 3,000 h

150 -40 to +100C 50ml*,400ml** ASTM E 162/E662, NF F 16-101 M1, DIN EN ISO 846

Plastic sealants in different shapes

Butyls


80/158

Plastic vs. elastic

Plastic sealantsLike adhesives, sealants are employed in diverse areas of ingaining in significance. Modern sealants ideally complemensuch as the use of solid gaskets, and can often even replace

FundamentalsButyl and polyisobutylene (PIB) sealants have different chem

practically no differences in their properties when using them1-component products. As they need no hardener and no timimmediately after application. This, and the characteristics bsealants interesting solutions for production and maintenanc

Properties Excellent adhesion to almost all substrates

Final properties directly upon application

Low permeability to water vapour and gases

Good resistance to water and aging

High flexibility even at low temperatures Self-welding

Due to their inherent tackiness, butyl and PIB sealants adhersubstrates, wood, PS, EPDM and other plastics. They even awhich are generally difficult to bond, such as PE, PP and PO

Why use a Henkel Butyl?

Sealing


81/158

The butyls are given their different shapes by means of extrusion at temperatures between 60 and80C. They are subsequently applied to backing paper and coiled. The backing paper is removedimmediately before the profile is used. Profiles come in the form of flat profiles (tapes) or round

profiles (cords) with a great variety of dimensions. They are either wound on reels or cut to length(pre-cut profiles). In order to increase their longitudinal dimensional stability, flat and round profilesare also available with a core made of cotton or synthetic yarn or with a fabric sheath. Laminatingone side of the tapes to plastic films/sheets, nonwovens or aluminium composite foils achievesfurther special properties such as UV and weathering stability, tear resistance, or compatibility withplasters or paints. No application equipment or particular precautions are required for handlingthe profiles. They are easy, safe and clean to use. Thanks to our long experience and the excellentreliability of our production processes, profiles from Henkel have outstanding dimensional accuracy.This is ensured by uniform application of material during production, a feature which is constantlymonitored by our Quality Assurance.

Profiles

Putties are easily shapeable sealants based on polyisobutylene. They are given the required shape byhand and then pressed into gaps, joints or openings. Putties from Henkel easily mould themselves

to any kind of surface geometry. Having good adhesion as well as easy shapeability, they provide anexcellent seal against water, moisture, gases and dust.

Putties

At room temperature, hotmelt butyl sealants are highly viscous a

Documents

189814 Product Selector