2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, … Exhibit … · BS EN 13163:2012+A2:2016 BS EN 13164:2012+A1:2015 BS EN 13165:2012+A2:2016 BS EN 13166:2012+A2:2016

Schedule of Accreditation issued by

United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

~ UKAS I'IHJIIU(I"

C U! IH K SI ION

0113

PO Box No 195

Bucknalls Lane

Garston Watford

.Accredited to ISOIIEC Hertfordshire 17065;2012 to provide w025 SBA

product conformity certification

British Board of Agrement

Issue No: 025 Issue date: 20 October 2017

Contact: Mrs Clalre Alzlewood

Tel:

Website: www.bbacerts.co.uk

Locations where certification activities covered by the above Accreditation Standard are undertaken

British Board of Agrement PO Box 195 Bucknalls Lane Garston Watford Herts. WD25 9BA United Kingdom

Assessment Ma~ager: GL Page 1 of 24

BBA00010736_0001 BBA00010736/1

Schedule of Accreditation Issued by

~ United Kingdom Accreditation Service 2 Pine Trees Chertse Lane, Staines-u on-Thames TW18 3HR UK

UKAS f'RllllU(r

(IJ(TII'IC\liON British Board of Agrement

0113 Issue No: 025 Issue date: 20 October 2017

Accredited to ISOIJEC 17065:2012 to provide product

conformity certification

Product

DETAIL OF ACCREDITATION

At the last review of Document BBA 001 the following standards were included within the scope of accreditation. Other standards may have since been added using the flexible scope arrangements.

Standard

Building Systems and Kits BBA Technical Specifications 001 to 0013 and BBA Document BBA 001

Ceiling Products

Concrete and Plaster Products

Heating and Ventilation Products and Systems

Finishes

Floor Products

Highway Works, Products and Systems

Jointing Products, Components and Materials

Masonry Products

Roof and Roofing Products and Systems

Drainage and Plumbing Products and Systems

Wall and Cladding Products and Systems

Window, Door and Opening Products and Systems

Assessment Manager. GL Paga 2 of24

BBA00010736_0002 BBA00010736/2


~ United Kingdom Accreditation Service 2 Pine Trees, Chertse Lane, Staines-u on·Thames, TW18 3HR UK

U KAS l'llf)l)l}(l

CWI"IFICSIION

0113 British Board of Agrement

Issue No: 025 Issue date: 20 October 2017 Accredited to ISOIIEC

17065:2012 to provide product conformity cert!ftcatlon

Product

Environmental Profiles of Construction Products

Metal Anchors for use in Concrete Part 1: Anchors In General (97/177/EC)

Metal Anchors for use in Concrete Part 2: Torque controlled Expansion Anchors (97/177/EC)

Metal Anchors for use in Concrete Part 3: Undercut Anchors (97/177/EC)

Metal Anchors for use in Concrete Part 4: Deformation-Controlled Expansion Anchors (97/177/EC}

Metal Anchors for use in Concrete Part 5: Bonded Anchors (97/177/EC)

Metal Anchors for use in Concrete Part 6: Anchors for Multiple use for Non-Structural Applications (97/177/EC)

Structural Sealant Glazing Systems (SSGS) Part 1: Supported and Unsupported Systems (96/582/EC)

Structural Sealant Glazing Systems (SSGS) Part 2: Coated Aluminium Systems (96/582/EC)

Structural Sealant Glazing Systems (SSGS) Part 3: Systems incorporating Profiles with a Thermal Barrier (96(582/EC)

International Partition Kits for use as Non Load-Bearing Walls (2001/596/EC)

Assessment Manager; GL

Standard

• BRE Scheme Document SO 028

ETAG 001

····----

ETAG 001

ETAG 001

ETAG 001

ETAG 001

ETAG 001

ETAG 002

ETAG 002

ETAG 002

ETAG 003

-

Page 3 of24

BBA00010736_0003 BBA00010736/3


~ United Kingdom Accreditation Service 2 Pine Trees, Chertse Lane Staines-u on-Thames, TW18 3HR UK

UI\AS I'IIODU(f

CHHif'l(~\ liON


Issue No: 025 Issue date: 20 October 2017 Accredited to ISO/IEC

17065:2012 to provide product conformity certification

Product

External Thermal Insulation Composite Systems with Rendering (2001/596/EC)

Liquid Applied Roof Waterproofing Kits Part 1: General (2001 1596/EC)

Systems of Mechanically Fastened Flexible Roof Waterproofing Membranes (98/143/EC)

Timber Frame Building Kits (99/455/EC)

Prefabricated Stair Kits in General (excluding severe climatic conditions) (2001/596/EC)

Non Load-Bearing Permanent Shuttering Kits/Systems based on Hollow Blocks or Panels of Insulating Materials and sometimes Concrete (2001/596/EC)

Self Supporting Translucent Roof Kits (2001/596/EC)

Light Composite Wood-Based Beams and Columns (99/92/EC)

Log Building Kits {99/455/EC)

Post-Tensioning Kits for Pre-stressing of Structures (98/456/EC)

Plastic Anchors for Fixing of External Thermal Insulation Composite Systems with Rendering (97/463/EC)

Three-Dimensional Nailing Plates (97/638/EC)

A5sessment Manager: GL

Standard

ETAG 004

ETAG 005

ETAG 006

ETAG 007 ..

ETAG 008

ETAG 009

ETAG 010

ETAG 011

ETAG 012

ETAG 013

ETAG 014

ETAG 015

Page4 of 24

BBA00010736_0004 BBA00010736/4


~ United Kingdom Accreditation Service 2 Pine Trees, Chertse Lane. Staines-u on-Thames, TW18 3HR UK

UKAS I'IUJDUC f

CI'HIIf'IC.\TION



17065:2012 to provide product conformity certlfication

Product

Self~Supporting Composite Lightweight Panels Part 1: General (94/23/EC)

Self~Supporting Composite Lightweight Panels Part 2; Specific Aspects Relating to Self-Supporting Composite Lightweight Panels for use in Roofs (94/23/EC)

Self-Supporting Composite Lightweight Panels Part 3: Specific aspects relating to Self-Supporting Composite Lightweight Panels for use in External Walls and Claddings (94/23/EC)

Self-Supporting Composite Lightweight Panels Part 4: Specific.Aspects Relating to Self-Supporting Composite Light Panels for use in Internal Walls and Ceilings (94/23/EC)

Veture Kits ~ Prefabricated Units for External Wall Insulation (2001/308/EC)

Fire Protective Products Part 1: General (2001/596/EC)

Fire Protective Products Part 2: Reactfve Coatings for Fire Protection of Steel Elements

Fire Protective Products Part 3: Renderings and Rendering Kits for Fire Resisting Applications

Fire Protective Products Part 4: Fire Protective Board, Slab and Mat Products and Kits

Pre-Fabricated Wood-Based Load~Bearing Stressed Skin Panels (94/23/EC)

Plastic fixings for masonry/stonework (non-structural)

Assessment Manager. GL

Standard

ETAG 016

ETAG 016

ETAG 016

ETAG 016

ETAG 017

ETAG 018

ETAG 018

ETAG 018

ETAG 018

ETAG 019

ETAG 020

Page 5 of24

BBA00010736_0005 BBA00010736/5


~ United Kingdom Accreditation Service 2 Pine Trees Chertse Lane Staines-u on-Thames TW18 3HR UK

UKAS 1'1(0(11.1( l

<:UntFICAII!lN



17065:2012 to provide product conform lty certification

Product

Cold Storage Premises Kits Part 1: Room Kits (2005/484/EC)

Cold Storage

Watertight covering kits for wet room floors and/or walls Part 1: Liquid applied coverings with or without wearing surface

Watertight covering kits for wet room floors and/or walls Part 2: Kits based on flexible sheets

Watertight covering kits for wet room floors and/or walls Part 3: Kits based on inherently watertight boards

Inverted roof insulation kits

Liquid applied roof waterproofing kits

Thermal Insulation Products for Buildings- Factory Made Mineral Wool (MW) Products. Specification

Thermal Insulation Products for Buildings - Factory Made Products of Expanded Polystyrene. Specification

Thermal Insulation Products for Buildings- Factory Made Products of Extruded Polystyrene Foam {XPS). Specification

Thermal Insulation Products for Buildings - Factory Made Rigid Polyurethane Foam (PUR) Products. Specification

Thermal Insulation Products for Buildings~ Factory Made Products of Phenolic Foam (PF). Specification

Thermal Insulation Products for Buildings -Factory Made Cellular Glass (CG) Products. Specification

Assessment Manager: G L

Standard

ETAG 021

ETAG 022

ETAG 022

ETAG 022

ETAG 031

ETAG 033

BS EN 13162:2012+A1:2015

BS EN 13163:2012+A2:2016

BS EN 13164:2012+A1:2015

BS EN 13165:2012+A2:2016

BS EN 13166:2012+A2:2016

88 EN 13167:2012+A1:2015

Page6 of 24

BBA00010736_0006 BBA00010736/6


~ United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-ur.on·Thames, TW18 3HR, UK

U KAS I'IH)IlliCl

CHtllriCSIIUN


Issue No: 025 Issue date: 20 October 2017 . Accredited to ISO/IEC


Product

Thermal Insulation Products for Buildings- Factory Made Wood Wool (WW) Products. Specification

Thermal Insulation Products for Buildings- Factory Made Products of Expanded Perlite (EPS). Specification

Thermal Insulation Products for Buildings - Factory Made Wood Fibre (WF} Products. Specification

Wood~Sased Panels for use In Construction. Characteristics, Evaluation of Conformity and Marking

Timber Structures. Structural Laminated Veneer Lumber. Requirements

Timber Structures- Connectors- Requirements

Timber Structures. Dowel-type fasteners. Requirements

Admixtures for Concrete, Mortar and Grout. Concrete Admixtures. Definitions, Requirements, Conformity, Marking and Labelling

Specification for Masonry Units. Autoclaved Aerated Concrete Masonry Units

Specification for Mortar for Masonry. Masonry mortar

Thermal insulation products for buildings- In situ formed loose-fill mineral wool (MW) Part 1: Specification for the loose fill products before installation

Assessment Manager: GL

Standard

BS EN 13168:2012+A1:2015

BS EN 13169:2012+A1:2015

BS EN 13171:2012+A1:2015

SS EN 13986:2004+A1:2015

BS EN 14374:2004

SS EN 14545:2008

BS EN 14592:2008+A1:2012

BS EN 934-2:2009+A 1:2012

BS EN 771-4:2011 +A 1 :2015

BS EN 998~2:2016

BS EN 14064~1 :2010

Page 7 af24

BBA00010736_0007 BBA00010736/7


United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Stalnes-upon-Thames, TW18 3HR, UK


Issue No: 025 Issue date: 20 October 2017 . Accredited to ISO/IEC


Product

Windows and doors- Product standard, performance characteristics - Part 1: Windows and external pedestrian doorsets without resistance to fire andfor smoke leakage characteristics

Flexible sheets for waterproofing- Bitumen damp proof sheets including bitumen basement tanking sheets -Definitions and characteristics


Standard

BS EN 14351-1:2006+A2:2016

BS EN 13969:2004

Page 6 of 24

BBA00010736_0008 BBA00010736/8

Schedule of Ace redi talion Issued by

United Kingdom Accreditation Service ~ 2 Pine Trees Chertse. Lane Staines-u pn-Thames TW18 3HR .UK

U KAS l'ltOD!.JCI

Cllli'IHC·\'IION


Issue No: 025 Issue date: 20 October 2017 Accredited to iSO/IEC


Product Standard

The certification systems used for the above are one or more of the following:

• Type testing or examination • Product evaluation • Design appraisal

These can be coupled with assessment and surveillance of production, the supplier's quality system and/or installation sites,

Where appropriate a:

• European Technical Approval, or • Certificate or Statement of Conformity, or • BBA Agrement Certificate • Certificate of factory production control

Will be issued to the supplier along with (if relevant) a license to use the· appropriate mark of conformity.

Micro•generatibn Product .certif!Mtion

Solar Collectors Solar Photovoltaic Panels Micro and Small Wind Turbines Heat Pumps Biomass Heat-led Micro- Co Generation Packages Electricity Led Micro Go-Generation Packages

Bespoke Building Integrated Photovoltaic Products

Pitched Roof Installation Kits


DECC Scheme Requh'ematlts

MCS 004- Solar Collectors MCS 005" Solar Photovoltaic Panels MCS 006 - Micro and small wind turbines MCS 007- Heat Pumps MCS 008- Biomass MCS 014- Micro CHP MCS 015 - Electricity Led Micro Go-Generation Packages MCS 017-Bespoke Building Integrated Photovoltaic Products MCS 012-Pitched Roof Installation Kits MCS 010 (Generic Factory Production Control) MCS 011 (Testing and acceptance criteria)

Page 9 of24

BBA00010736_0009 BBA00010736/9

~ rl


United Kingdom Accreditation Service 2 Pine Trees Chertse. Lane Stalnes-u on-Thames, TW18 3HR UK

LJI<AS I'IW!JU(l'

CUll"ll"lCHION




Product

Installation of following measures:

Cavity Wall Insulation Loft Insulation Pitched Roof Insulation Flat Roof Insulation Internal Wall Insulation ExternaiWall Insulation Hybrid Wall Insulation Draught Proofing Floor Insulation Energy Efficient Glazing and Doors Room in Roof Insulation

Installation of insulating material to the internal walls of a building, not including the installation of flexible thermal linings

Installation of Insulating material to the external walls of a building, not including the insulation of demountableclad buildings

Installation of Insulating material to the external and internal walls of a building (''hybrid insulation"), not including the insulation of demountable-clad buildings, and not including the installation of flexible thermal linings

Standard

PAS 2030:2017 Specification for the installation of energy efficiency measures (EEM) ln existing buildings Edition 4- February 2017

PAS 2031:2017 Certification of energy efficiency measure (EEM) installation in existing buildings Edition 3- March 2017

DCLG Conditions of Authorisation October 2015

And

The Competent Person Scheme 'BBA Solid Wall Insulation Competent Person Scheme' In accordance with the Building Regulations 2010 (as amended)

END

Assessment Manager: GL Page 10 of24

BBA00010736_0010 BBA00010736/10

~ UI<AS l'IH)I H.iCl

nnnHcsnoN

0113

Accredited to ISO/IEC 17065:2012 to provide product



United Kingdom Accreditation Service 2 Pine Trees Chertse Lane. Staines-upon-Thames, TW18 3HR, UK



Accreditation for the purpose of Notified Body Activity taking into account eA2117 and relevant requirements of ISO 17025

Directive/Regulation Conforlty Category of products or Essential Assessment individual products requirements:Product procedure/Module specification/ /Article Properties/Standards _

The Construction Annex V- FPC 97/555fEC EN 197-1:2000 Products Regulation Certification Body Cements, building limes and EN 197-1:2000/ A1:2004 (EU) No 305/2011 (AVCP) other hydraulic binders : - EN 197-1:2000/A3:2007

System 2+ Common cements, including: - EN 197-1:2011 Portland cement, -Portland composite cements: Portland-slag cement, Portland-silica fume cement, Portland-pozzolana cement, Portland-fly ash cement, Portland-burnt shale cement, Portland-limestone cement, Portland composite cement, -Blastfurnace cements, -Pozzolanic cements,-Composite cements (preparation of concrete, mortar, grout and other mixes for construction and for the manufacture of construction products)

The Construction Annex V- Product 97/555/EC EN 459-1:2010 Products Regulation Certification Body Cements, building limes and EU) No 305/2011 (AVCP) other hydraulic binders : -

System 1 Building limes, including: -Calcium limes, -Dolomitic limes, -Hydraulic limes {preparation of concrete, mortar, grout and other mixes for construction and for the manufacture of construction products).

The Construction Annex V- FPC 97/740/EC EN 771-4:2011 Products Regulation Certification Body Masonry and related products (EU) No 305/2011 (AVCP) (1/3) : - Masonry units category I

System 2+

Assessment Manager: G L Page 11 of 24

BBA00010736_0011 BBA00010736/11

0113




United Kingdom Accreditation Service 2 Pine Trees Chertse Lane Staines-u on-Tham_~s TW18 3HR,UK



Accreditation for the purpose of Notified Body Activity taking into account EA2117 and relevant requirements of ISO 17025 ..

D I rectivefReg u I atio n Confority Category of products or Essential Assessment individual products requirements :Product procedurefModule specification/ /Article Prqperties/Standards

The Construction Annex V- Testing 97/740/EC EN 845-1;2003+A1:2008 Products Regulation Laboratory Masonry and related products (EU) No 305/2011 (AVCP) (2/3) :-Ties (in wails and

System 3 partitions), Tension straps (in walls and partitions), Joist hangers (in walls and partitions), . Brackets (in walls and partitions).

The Construction Annex V- Testing 97/740/EC EN 845-2:2003 Products Regulation Laboratory Masonry and related products (EU) No 305/2011 {AVCP) (2/3) : - Lintels (in walls and

System 3 partitions).

Annex V- FPC 99/469/EC EN 934-2:2009 Certification Body Products related to concrete, (AVCP) mortar and grout (112) : ~ System 2+ Admixtures (for concrete, mortar

and grout).

Annex V- FPC 97/740/EC EN 998-2:2010 Certification Body Masonry and related products (AVCP) (1/3) : ~ Factory-made,designed System 2+ masonry mortars (in walls,

columns and partitions).

Assessment Manager: GL Page 12 of 24

BBA00010736_0012 BBA00010736/12

~ UKAS l'lt01.HI(J"

CUtllfiC\TII,lN

0113


conformity cert!ficat!on


United Kingdom Accreditation Service 2 Pine Trees Chertse Lane Stalnes-l! on-Thames .• TW18 3HR UK



Accreditation for the purpose of Notified Body Activity taking into account EA2f17 and relevant - requirements of ISO 17025

D irective/Reg ulatio n Confority Category of products or Essential Assessment individual products requlrements:Product procedurefModule spec lfic atio n/ /Article Properties/Standards

The Construction Annex V- FPC 98/214/EC EN 1 090-1 :2009 Products Regulation Certification Body Structural metallic products and EN 1 090-1 :2009+A 1:2011 (EU) No 305/2011 (AVCP) ancillaries {2/4) : -Structural EN 1090-1 :2009/AC:201 0 (cont'd) System 2+ metallic construction members:

finished metallic products such as trusses, girders, columns, stairs, ground piles, bearing piles and sheet piling, cut to size sections designed for certain applications, and rails and sleepers. They can be unprotected or protected against corrosion by coating, welded or not. (for uses in work's frames and foundations)

Annex V- FPC 99/469/EC EN 1504-2:2004 Certification Body Products related to concrete, EN 1504-3:2005 (AVCP) mortar and grout (1/2) : - EN 1504-4:2004 System 2+ Concrete protection and repair EN 1504-5:2004

products EN 1504-6:2006 EN 1504-7:2006

--.

Annex V- FPC 98/601/EC EN 12271:2006 Certification Body Road construction products (1/2) EN 12273:2008 (AVCP) : - Surface treatments {for System 2+ surface treatments of roads).


BBA00010736_0013 BBA00010736/13

~ UKAS I'I!OI.Ill(T

CfltiiFlC\TION

0113

Accredited to !SO/lEG 17065:2012 to provide product



United Kingdom Accreditation Service 2 Pine Trees Chertse Lane Staines-u on-Thames, TW18 3HR, UK

British Board of Agrement Issue No: 025 Issue date: 20 October 2017

Accreditation for the purpose of Notified Body Activity taking into account EA2/17 and relevant

··- requirements of ISO 17025

Directive/Regulation Conforliy Category of products or Essential Assessment individual products requirements: Produ et procedure/Module specification/ /Article Prq[)_erti as/Standards

The Construction Annex V- FPC 98/601/EC EN 13108-1:2006 Products Regulation Certification Body Road construction products (1/2) EN 13108-1 :2006/AC:2008 (EU) No 305/2011 (AVCP) : - Bituminous mixtures (for road EN 13108-2:2006 (cont'd) System 2+ construction and surface EN 13108-2;2006/AC:2008

treatment of roads). EN 13108-3:2006 EN 13108-3:2006/AC:2008 EN 13108-4:2006 EN 13108-4:2006/AC:2008 EN 13108-5:2006 EN 13108-5:2006/AC:2008 EN 13108-6:2006 EN 131 OB-6:2006/AC:2008 EN 13108-7:2006 EN 131 08-7:2006/AC:2008

Annex V- Testing 99/91/EC EN 13162:2008 Laboratory Thermal insulating products EN 13163:2008 (AVCP) (1/2) : -Thermal insulating EN 13164:2008 System 3 products EN 13165:2008

EN 13166:2008 EN 13167:2008 EN 13168:2008 EN 13169:2008 EN 13170:2008 EN 13171:2008 EN 14064-1:2010

Annex V- Product 99/91/EC EN 13162:2008 Certification Body Thermal insulating products EN 13163:2008 (AVCP) (2/2) : - Thermal insulating EN 13164:2008 System 1 and products EN 13165:2008

EN 13166:2008 Annex V- Testing EN 13167:2008 Laboratory EN 13168:2008 (AVCP) EN 13169:2008 System 3 EN 13170:2008

EN 13171:2008 EN 14064-1:2010

Assessment Manager: GL Paga 14 of24

BBA00010736_0014 BBA00010736/14

~ U KAS l'll(II)(IC/

O:IUIHC\ liON

0113




United Kingdom Accreditation Service 2 Pine Trees, Chertse Lane Staines-u on-Thames, TW18 3HR, UK



.Accreditation for the purpose of Notified Body Activity taking into account EA2/17 and relevant requirements of ISO 17025

Directive/Regulation Confority Category of products or Essential Assessment individual products requirements:Product procedure/Module specification! /Article Properties/Standards

The Construction Annex V- FPC 99/90/EC EN 13707:2004+A2:2009 Products Regulation Certification Body Membranes (1/3):- Roof sheets EN 13956:2005 (EU) No 305/2011 (AVCP) (in buildings). EN 13956:2005/AC:2006 (cont'd) System 2+

Annex V- Product 99/90/EC EN 13707:2004+A2:2009 Certification Body Membranes {2/3) : - Roof sheets EN 13956:2005 (AVCP) (for uses subject to reaction EN 13956:2005/AC:2006 System 1 to fire regulations).

Annex V- FPC 98/601/EC EN 13808:2005 Certification Body Road construction products (1/2) EN 14023:2010 (AVCP) : - Bitumen (for road System 2+ construction and surface

treatment of roads).

Annex V- FPC 99/90/EC EN 13967:2004 Certification Body Membranes (1/3):- Damp EN 13967:2004/A 1:2006 (AVCP) proofing sheets (in buildings). EN 13969:2004 System 2+ EN 13969:2004/A 1 :2006

Annex V- Product 97/462/EC EN 13986:2004 Certification Body Wood-based panels (1/2) :-(AVCP) Unfaced overlaid and veneered System 1 and or coated wood-based panels

(for structural elements in Annex V- FPC Internal or external applications). Certification Body (AVCP) System 2+

Annex V- Product 97/462/EC EN 13986:2004 Certification Body Wood-based panels (2/2) : -(AVCP) Unfaced, overlaid and veneered System 1 or coated wood-based panels

(for non structural elements in internal or external applications) ..

Assessment M~n~ger; GL Page 15 of 24

BBA00010736_0015 BBA00010736/15

~ U I< AS l'ltOIHI(J

CI.I!TliiC\ liON

0113




United Kingdom Accreditation Service 2 Pine Trees, Chertse Lane. Stalnes-u cin-Thames, TW18 3HR UK



Accreditation for the purpose of Notified Body Activity taking into account EA2/17 and relevant requirements of ISO 17025

Directive/Rag ulation Confority Category of products or Essential Assessment individual products requirements: Product procedure/Module specification/ /Article Pro_12erties/Standards

The Construction Annex V- Testing 98/436/EC EN 14351-1:2006+A1:2010 Products Regulation Laboratory Roof coverings, rooflights, roof (EU) No 305/2011 (AVCP) windows and ancillary (cont'd) System 3 products (6/6)

AnnexV- Testing 99/93/EC EN 14351-1:2006+A1:2010 Laboratory Doors, windows, shutters, (AVCP) blinds, gates and related System 3 building

hardware (1/1) :

Annex V- Product 97/176/EC EN 14374:2004 Certification Body Structural timber products (1/3) (AVCP) and (2/3) System 1

Annex V- FPC 97/638/EC EN 14545:2008 Certification Body Fasteners for structural timber ETAG 015 (AVCP) products (111 System 2+

Annex V- FPC 98/601/EC EN 14695:201 0 Certification Body Road construction products (1/2) (AVCP) :-Bridge deck waterproofing -

System 2+ products and kits (for bridge decks).

Annex V~ Testing 97/176/EC EN 14592:2008 Laboratory Structural timber products (3/3) : (AVCP) -Fasteners for structural System 3 timber products


BBA00010736_0016

BBA00010736/16

~ UI<AS I'II(HHICI

<:Eitllf'U:,\liON

0113

Accredited to JSO/IEC 17065:2012 to provide product

conformlty certification


United Kingdom Accreditation Service 2 Pine Trees, Chertse Lane, Stalnes-u on-Thames, TW18 3HR, UK



Directive/ Reg u I atlo n Conforlty Category of products or Essential Assessment individual products requirements:Product procedure/Module specification/ /Article Properties/Standards

The Construction Annex V- Product 99/469/EC EN 14889-1:2006 Products Regulation Certification Body Products related to concrete, EN 14889-2:2006 (EU) No 305/2011 (AVCP) mortar and grout (1/2):- Fibres (cont'd) System 1 (for structural uses in concrete,

mortar and grout)

Annex V- FPC 99/94/EC Precast normal/ EN 15037-4:2010 Certification Body lightweight/ autoclaved aerated (AVCP) concrete products (1/1): -System 2+ Precast normal/ lightweight/

autoclaved aerated concrete products (for structural use},

Annex V- Product 99/469/EC EN 15167-1:2006 Certification Body Products related to concrete, (AVCP) mortar and grout (1/2) : -System 1+ Additions (Type 11) (for concrete,

mortar and grout),

Annex V- Product 96/582/EC ETAG 001 - 1 Certification Body Metal anchors for use in ETAG 001-2 (AVCP) concrete (mechanical fasteners) ETAG 001-3 System 1 ,, - ETAG 001-3 Amendment

Metal anchors for use in ETAG 001-4 concrete (heavy-duty type) (for ETAG 001-5 fixing ETAG 001-6 and/or supporting concrete ET AG 001 - 6 Amendment structural elements or heavy units such as cladding and suspended ceilings),

Annex V- Product 97/177/EC ETAG 001-5 Certification Body Metal injection anchors for use (AVCP) in masonry (1/1) : - Metal

.System 1 injection anchors for use in masonry

Assessrnent Manager; GL Page 17 of24

BBA00010736_0017 BBA00010736/17

~ V

UKAS I'IIOI)UCr

conuu.·,\nON

0113

Accredited to ISO/IEC 17065:2.012 to provlde product

confonnlty certification


United Kingdom Accreditation Service 2 PineTrees, Chertsa. Lane Staines-u on-Thames TW18 3HR, UK



Accreditation for the purpose of Notified Body Activity taking into account EA2117 and relevant reQuirements of 15017025

Oirective!Reg u lation Conforlty CategorY of products or l:ssential Assessment Individual products requirements;Product procedure/Module specification/ /Article Properties/Standards

The Construction Annex V- FPC 97/463/EC ETAG 001-6 Products Regulation Certification Body Plastic anchors for use in ETAG 001 -6 Amendment (EU) No 305/2011 (AVCP} concrete and masonry (1/1) ETAG 014 (cont'd) System 2+

Annex V- Product 96/582/EC ETAG 002-1 Certification Body Structural sealant glazing kits of ETAG 002-2 (AVCP) types (curtain walling) :- ETAG 002-3 System 1 Structural sealant glazing kits,

Types 11 and IV (for external walls and roofs).

Annex V- FPC 96/582/EC ETAG 002-1 Certification Body Structural sealant glazing kits of ETAG 002-2 (AVCP) types (curtain walling) : - ETAG 002- 3 System 2+ Structural sealant glazing kits,

Types I and Ill (for external walls and roofs).

Annex V- Product 98/213/EC ETAG 003 Certification Body Internal partition kits (1/5) (AVCP) System 1

Annex V- Product 97/556/EC ETAG 004 Version Certification Body External thermal insulation 08/2011 (AVCP) composite systems/kits with System 1 and rendering (ETICS)(1/1}:-

Annex V- FPC Certification Body (AVCP) System 2+

Assessment Manager; GL Page HI of 24

BBA00010736_0018 BBA00010736/18

~ UKAS I'HOOliCT

cmnncAIION

0113

Accredited to ISO/IEC 17065:201210 provide product

conformity certlflcati on


United Kingdom Accreditation Service 2 Pine Trees, Chertse Lane Stalnes-u on- Thames, TW1 8 3HR, UK


Accreditation for the purpose of Notified Body Activity taking Into account EA2/17 and relevant requirements of ISO 17025

Directive/Rag ulation Confority Category of products or Essential Assessment individual products requirements: Product procedure/Module specification/ /Article Properties/Standards

The Construction Annex V- Product 98/279/EC ETAG 004 Version 08/2011 Products Regulation Certification Body Non load bearing permanent ETAG 009 (EU) No 305/2011 (AVCP) shutterings; kits/systems based (cont'd) System 1 and on hollow blocks or panels of

insulating materials and, Annex V- FPC sometimes, concrete {1/1) Certification Body (AVCP) System 2+

Annex V- Product 98/599/EC ETAG 005 Certification Body Liquid applied roof waterproofing (AVCP} kits (3/3) : - Liquid applied System 1 roof waterproofing kits (for uses

subject to reaction to fire regulations)

Annex V~ FPC 98/143/EC ETAG 006 Certification Body Systems of mechanically (AVCP) fastened flexible roof System 2+ waterproofing membranes (1/1)

Annex V- Product 99/455/EC ETAG 007 Certification Body Timber frame and log ETAG 012 (AVCP) prefabricated building kits (1/1) System 1

Annex V- FPC 99/89/EC ETAG 008 Certification Body Prefabricated stair kits (1/2) (AVCP) System 2+

Annex V" Product 99/89/EC ETAG 008 Certification Body Prefabricated stair kits (2/2) (AVCP) System 1


BBA00010736_0019 BBA00010736/19

~ V

UKAS I'IIOI.H_!Cf

CUll I rtCAIION

0113

Accredited to ISOIIF:C 17065:2012 to provide product

conformity certmcatlon


United Kingdom Accreditation Service 2 Pine Trees, Chertse Lane Stalnes-u on-Thames TW18 3HR UK




D irective/Reg ulatio n Confority Category of products or Essential Assessment Individual products requIrements :Product procedure/Module specification/ /Article Properties/Standards

The Construction Annex V- Product 98/600/EC ETAG 010 Products Regulation Certification Body Self-supporting translucent roof (EU) No 305/2011 (AVCP) kits (except glass-based kits) (cont'd) System 1 (3/3)

Annex V- Product 99/92/EC ETAG 011 Certification Body Light composite wood-based (AVCP) beams and columns (1/1) System 1

Annex V- Product 98/456/EC ETAG 013 Certification Body Post-tensioning kits for the (AVCP) prestresslng of structures (1/1} System 1+

Annex V~ Product 2000/447/EC ETAG 016 ·1 Certification Body Prefabricated wood-based load- ETAG 016-2 (AVCP) bearing stressed skin panels ETAG 016-3 System 1 and self-supporting composite ETAG 016-4

lightweight panels (3/6)

Annex V- Product 99/454/EC ETAG 018-1 Certification Body Fire stopping, fire sealing and ETAG 018-4 (AVCP) fire protection products (1/2) and ETAG 018-4 Amendment System 1 (2/2)

Annex V- Product 2000/447/EC ETAG 019 Certification Body Prefabricated wood-based load-(AVCP) bearing stressed skin panels System 1 and self-supporting composite

lightweight panels (1/6) and (3/6)

Assessment Manager: Gl Page 20 of 24

BBA00010736_0020

BBA00010736/20

~ V

UKAS l'IIOt'>UCf

(l;llTWI(AIION

0113

Accredited to ISOfiEC 17065:2012 to provide .product

conformity certiflcatlon


United Kingdom Accreditation Service __ 2 Pine Trees, Chertsex lane, Stalnes-u12_on-Thames, TW1 B 3HR, UK



Accreditation for the purpose of Notified Body Activity taking into account EA2117 and relevant requirements of ISO 17025

Directive/Rag u lation Confority Category of products or Essential Assessment individual products requirements: Product procedure/Module specification/ /Article Pro pe rti es/Standa rds

The Construction Annex V- FPC 2003/655/EC ETAG 022-1 Products Regulation Certification Body Watertight coverings kits for ETAG 022-2 (EU) No 305/2011 (AVCP) wetroom floors and walls (1/2 ETAG 022-3 (cont'd) System 1 and

Annex V- FPC Certification Body (AVCP) System 2+& 2+

Annex V- FPC 2003/655/EC ETAG 022-1 Certification Body Watertight coverings kits for ETAG 022-2 (AVCP) wetroom floors and walls (2/2) ETAG 022-3 System 1 & 2+

Annex V- FPC 2003/722/EC ETAG 033 Certification Body Liquid-applied bridge deck (AVCP) waterproofing kits;-System 2+ Liquid-applied bridge deck

waterproofing kits (in bridge decks).

Annex V- Product 2003/728/EC ETAG 023 Certification Body Metal frame building kits, (AVCP) concrete frame building kits, System 1 prefabricated building units, cold

storage room kits and rock-fall protection kits : -Prefabricated building units (in building works).

Assessment Manager: GL Page 21 of 2:4

BBA00010736_0021 BBA00010736/21

~ UKAS l'll(ll) UC I

t:WTIHG\li(JN

0113




United Kingdom Accreditation Service 2 Pine Trees Chertse Lane Stalnes-u on-Thames TW18 3HR, UK




Directive/Rag ulation Confority Category of products or Essential Assessment individual products requirements:Product

. procedure/Module specification! /Article Properties/Standards

The Construction As a Technical Annex IV -Product Areas 1. Precast normal I lightweight Products Regulation Assessment Body I autoclaved aerated concrete (EU) No 305/2011 (TAB) for products. (cont'd) developing

European 2. Doors, windows, shutters, Assessment gates and related building Documents hardware.

3. Membranes, including liquid applied and kits (for water and/or water vapour control)

4. Thermal insulation products. composite insulating kits I systems.

6, Chimneys, flues and specific products

7. Gypsum products

8. Geotextiles, geomembranes, and related products.

9. Curtain walling I cladding I structural sealant glazing.

12. Circulation fixtures: road equipment

13. Structural timber products I elements and ancillaries.

14. Wood based panels and elements.

15. Cement, building limes and other hydraulic binders.

Assessment Manager: GL Page 2.2. of 24

BBA00010736_0022

BBA00010736/22

- .:·"

0113

Accredited to ISO/lEG. 17065:2012 to provide product

conformity certlflcatlon


United Kingdom Accreditation Service 2 Pine Trees Chertse Lane Staines-u on-Thames" TW18 3HR UK



Accreditation for the purpose of Notified Body Activity taking Into account EA2117 and relevant requirements of ISO 17025

Directive/Regulation Confority Category of products or Essential Assessment individual products requirements:Product procedure/Module specification/ /Article P ropertles/Standards

The Construction As a Technical Annex IV -Product Areas 16. Reinforcing and Products Regulation Assessment Body (cant' d) prestressing steel for concrete (EU) No 305/2011 (TAB) for (and ancillaries). post (cont'd) developing tensioning kits

European Assessment 17. Masonry and related Documents products. masonry units, (cont'd) mortars, and ancillaries.

18. Waste water engineering products

19. Floorings.

20. Structural metallic products and ancillaries.

21. Internal & external wall and ceiling finishes. Internal partition kits

22. Roof coverings, roof lights, roof windows, and ancillary products. roof kits

23. Road construction products.

24. Aggregates

25. Construction adhesives

26. Products related to concrete, mortar and grout.

27. Space heating appliances

28. Pipes~tanks and ancitlaries not in contact with water intended for human consumption


BBA00010736_0023 BBA00010736/23

~ V UKAS I'UODUCI

(I:I!I'IIICAliON

0113

Accredited to ISOIIEC 17065:2012 to provide product

conform lty certification


United Kingdom Accreditation Service 2 Pine Trees Chertse Lane Staines-u on-Thames, TW18 3HR, UK



Accreditation for the purpose of Notified Body Activity taking into account EA2f17 and relevant rl:!quirements of ISO 17025

Directive/Rag ulation Confority Category of products or Essential Assessment individual products requirements:Product procedurefModule specification/ /Article Properties/Standards

The Construction As a Technical Annex IV -Product Areas 29. Construction products in Products Regulation Assessment Body (cont'd) contact with water intended (EU) No 305/2011 (TAB) for for human consumption (cant' d) developing

European 30. Flat glass, profiled glass Assessment and glass block products Documents (cont'd) 32. Sealants for joints

33. Fixings

34.Building kits, units, and prefabricated elements.

END


BBA00010736_0024 BBA00010736/24