8
Point-to-Point Microwave Radio Equipment for Data and Voice Communicaon Produced in Europe

20111210 SAF CFIP Brochure

Embed Size (px)

Citation preview

8/2/2019 20111210 SAF CFIP Brochure

http://slidepdf.com/reader/full/20111210-saf-cfip-brochure 1/8

Point-to-Point

Microwave Radio

Equipment for

Data and Voice

Communicaon

Produced in Europe

8/2/2019 20111210 SAF CFIP Brochure

http://slidepdf.com/reader/full/20111210-saf-cfip-brochure 2/8

SAF Tehnika is among the world’s top microwave carrier-class

point-to-point radio manuacturers, publicly traded in NASDAQ,

ISO certied, with R&D and complete production in Europe,covering spectrum 1.4-38 GHz and licence-ree 24 GHz with

capacities up to 366 Mbps ull-duplex (per radio).

The company oers 2 main product lines:

CFIP series

- 1,4 GHz Marathon FIDU (long haul),- 366 Mbps Lumina FODU (Optical&Electrical Gigabit Ethernet),

- CFIP-108 FODU (Fast Ethernet),- 363 Mbps CFIP PhoeniX Hybrid Split Mount System.

SAF FreeMile

- 100 Mbps ull duplex licence-ree FODU.

SAF Tehnika

CFIP FODU Technical Specifcation

Radio & Modem Full outdoor system with built-in radio,

modem and trac interaces

Product name CFIP - 108 FODU CFIP Lumina FODU

Frequency Bands 6, 7, 8, 10, 11, 13, 15, 18, 23, 24, 26, 38 GHzCapacity Up to 108 Mbps Up to 366 Mbps

Channel bandwidth 7/14/28 MHz 28/40/56 MHz

Modulation QPSK, 16APSK, 32APSK, 64QAM;

or 14MHz bw only: 128QAM

QPSK, 16APSK, 32APSK, 64QAM, 128QAM, 256QAM (or all

bw)

Protection Switching 1+0

Ring/Mesh (with STP)

1+0, Ring/Mesh (with RSTP/MSTP),

1+1 HSB switch

Aggregation - 2+0 (Ethernet Aggregation)

ACM switching Hitless

Interaces

Ethernet port 1xRJ-45 (electrical) 1 or 2 RJ-45 (electrical) or 1 or 2 ODC (ber optical)

hybrid: 1 RJ-45 (electrical) & 1 ODC (optical)

E1 4xE1 (18-pin connector) none

Power PoE+ (not IEEE standard) Outdoor power connector, PoE with surge arrestor solution

RSSI port BNC

Serial Port Dual-BNC

Connection to antenna Standard ange according to requency

CFIP Lumina FODUCFIP - 108 FODU CFIP-108 is primarily designed or IP networks and provides Fast

Ethernet interace with capacities rom 8 Mbps up to ull duplex

100 Mbps Fast Ethernet. In addition to that, CFIP-108 has a 4xE1 port or

legacy equipment connectivity and or use in hybrid TDM/IP networks.

CFIP Lumina systems are intended or Gigabit Ethernet backbone

applications delivering up to 366 Mbps per radio. 2+0 aggregation is

available or higher bandwidth users. Both single or dual, electrical and

bre optical interace versions are available, as well as hybrid version

with 1 optical and 1 electrical port.

Management

Management ports RJ-45 (same as trafc port) RJ-45 (electrical) or ODC (optical)

Management In-band In-band (trafc port) or VLAN port seperated

SNMP SNMP traps, MIB, SNMP v1/v2c, RMON

EMS Web based HTTP, Telnet, FTP, Terminal

Perormance graphs Uptime, Rx level, Tx level, System temperature, Radial MSE, LDPC decoder stress,

constellation diagram, equalizer graph

Ethernet perormance Per port Ethernet counters, Enhanced radio Ethernet statistics

Loopbacks E1, modem

8/2/2019 20111210 SAF CFIP Brochure

http://slidepdf.com/reader/full/20111210-saf-cfip-brochure 3/8

CFIP FODU Ports

CFIP-108

- RJ-45

- 18-pin (balanced E1)

- BNC (RSSI)

- Twin BNC (Serial)

CFIP Lumina (Optical)

- 1 or 2 optical ODC (Eth)

- 48V DC (Power)

- BNC (RSSI)

- Twin BNC (Serial)

CFIP Lumina (Electrical)

- 1 or 2 electrical RJ-45 (Eth)

- 48V DC (Power)

- BNC (RSSI)

- Twin BNC (Serial)

CFIP Lumina (Hybrid version)

- 1 electrical RJ-45 &

1 optical ODC (Eth)

- 48V DC (Power)

- BNC (RSSI)

- Twin BNC (Serial)

Modulation

Channel bandwidths (MHz)

CFIP-108 FODU CFIP Lumina FODU

7 14 28 28 40 56

QPSK 8 17 35 35 49 72

16APSK 16 34 69 69 98 135

32APSK 21 43 100-108 88 127 186

64QAM 28-30 57 - 115 163 241

128QAM - 68-74 - 138 196 289

256QAM - - - 162-175 229-245 337-366

CFIP-108 and CFIP Lumina FODU total payload capacity (Mbps)

Ethernet

Switch Type Managed Fast Ethernet Layer 2 Managed Gigabit Ethernet Layer 2

Max rame size 1916 bytes 9728 bytes

MAC table 1K entries; automatic learning and aging 4K entries; automatic learning and aging

Packet buer 32KB; non-blocking store&orward 128KB; non-blocking store&orward

Flow Control 802.3x

QinQ (Double Tagging) Yes, 802.1 ad (Providing Bridging Technique)

QoS 64 level DiServ (DSCP) or 8 level 802.1p mapped in 4 prioritization queues with VLAN support

QoS queuing Yes Fixed or weighted (congurable ratio)

VLAN support 802.1Q (up to 15 concurrent trafc VLAN) 802.1Q (up to 4K VLAN entries)

Spanning Tree Protocol 802.1D-2004 STP, 802.1D-2004 RSTP 802.1D-2004 RSTP, 802.1Q-2005 MSTP

MEF MEF 9, MEF 14

Mechanical & Electrical

Power consumption 25 - 33 W (SP)

38 - 45 W (HP)

27 - 40 W (SP)

44 - 52 W (HP)

Weight 3.5 kg 3.9 kg

Temperature Range -33°C to +55°C

Dimmensions: HxWxD, mm 288x288x80

Operational use EN 300 019 Class 4.1, IP65 ODU: EN 300 019 Class 4.1, IP65

8/2/2019 20111210 SAF CFIP Brochure

http://slidepdf.com/reader/full/20111210-saf-cfip-brochure 4/8

Radio & Modem

Product name

CFIP PhoeniX Split Mount CFIP PhoeniX M Split MountFrequency Bands 6, 7, 8, 10, 11, 13, 15, 18, 23, 26, 38 GHz

Capacity IDU: up to 363 MbpsODU Unied Band: up to 363 Mbps

IDU: up to 348 Mbps, up to 63E1,up to 2xSTM-1 per every 1+0 link

ODU Unied Band: up to 348 Mbps

Channel bandwidth IDU: 3.5/7/14/28/40/56 MHzODU Unied Band: 3.5/7/14/28/40/56 MHz

IDU: 7/14/28/40/56 MHzODU Unied Band: 7/14/28/40/56 MHz

Modulation QPSK, 16QAM, 32QAM, 128QAM, 256QAM

Protection Switching 1+0, 1+1 (HSB, SD, FD), Ring/Mesh (with RSTP/MSTP),

2+0, 3+0, 4+0 (Ethernet Aggregation)

1+0, 1+1 (HSB, SD, FD), Ring/Mesh (with RSTP/MSTP),

E1 ring protection, STM-1 Add/Drop,

2+0, 3+0, 4+0 (Ethernet Aggregation)

Aggregation 2+0, 3+0, 4+0 (Ethernet Aggregation 802.1 ad) 2+0, 3+0, 4+0 (Ethernet Aggregation 802.1 ad),

2+0 aggregation between single MAC,2+2 protected aggregation

ACM switching Hitless YesManagementManagement ports RJ-45, DB-9 2xRJ-45, DB-15

Management In-band Out-band managament

SNMP SNMP traps, MIB, SNMP v1/v2c SNMP traps, MIB, SNMP v1/v2/v3

EMS Web based HTTP, Telnet, FTP, Terminal

Perormance graphs Uptime, Rx level, Tx level, System temperature,Radial MSE, LDPC decoder stress,

constellation diagram, equalizer graph

Rx level, Tx level, System temperature,Signal/Noise (SNR) level, System perormance,

constellation diagram, equalizer graph

Ethernet perormance Per port Ethernet counters, Enhanced radio Ethernetstatistics

Ethernet switch statistics

Loopbacks E1, modem, IF Modem, radio, E1 (local, remote)

Ethernet

Switch Type Managed Gigabit Ethernet Layer 2Max rame size 9728 bytes

MAC table 4K entries; automatic learning and aging

Flow Control 802.3x

QinQ (Double Tagging) Yes

QoS 64 level DiServ (DSCP) or 8 level 802.1p mappedin 4 prioritization queues with VLAN support

64 level Diserv (DSCP) or 802.1Q VLAN Tag Priority,IPv4 TOS priority, Port priority

QoS queuing Fixed or weighted (congurable ratio) Weighted

VLAN support 802.1Q (up to 4K VLAN entries)

Spanning Tree Protocol 802.1D-2004 RSTP, 802.1Q-2005 MSTP 802.1D-1998 STP, 802.1D-2004 RSTP

MEF MEF 9, MEF 14

Mechanical & ElectricalPower consumption IDU: 20 - 30W / ODU: 16-27 W(SP); 32-39W(HP) IDU: 30 - 40W / ODU: 13 - 18W

Weight IDU: 3.1 kg / ODU: 3.5kg IDU: 3.4 kg / ODU: 3.5kg

Temperature Range IDU: -5°C to +45°C / ODU: -33°C to +55°C IDU: -5°C to +55°C / ODU: -33°C to +55°C

Dimmensions: HxWxD, mm IDU: 1U rack (45x430x240)

ODU: 288x288x80

IDU: 1U rack (44.5x445x238.5)

ODU: 288x288x80

Operational use ODU: EN 300 019 Class 4.1, IP65; IDU: 300 019 Class 3.1E

CFIP PhoeniX Split Mount CFIP PhoeniX M (Modular) Split Mount

CFIP PhoeniX split mount system is designed to t in classical telecom

architecture with a radio located outdoors and a sheltered indoor unit.

CFIP PhoeniX also enables transition rom TDM networks to hybrid TDM/IP networks providing up to 20E1 + GigE. Total maximum capacity

is up to 363 Mbps ull duplex (per radio).

CFIP PhoeniX M split mount system consists o PhoeniX M IDU and

PhoeniX ODU (also with XPIC unctionality). PhoeniX M IDU provides up

to 63E1 and 2xSTM-1. Total maximum capacity is up to 348 Mbps ullduplex (per radio).

CFIP Split Mount Technical Specifcation

8/2/2019 20111210 SAF CFIP Brochure

http://slidepdf.com/reader/full/20111210-saf-cfip-brochure 5/8

CFIP PhoeniX ODU Ports

- N-type (data + power)

- BNC ( RSSI)

Modulation

Channel bandwidths (MHz)

CFIP PhoeniX IDU CFIP PhoeniX M IDU*

7 14 28 40 56 7 14 28 40 56

QPSK 8 17 35 49 71 8 17 36 52 74

16APSK 17 34 69 98 135 16 36 74 108 144 - 152

32APSK 21 45 88 127 182 21 46 94 132 192

64QAM 28 57 115 163 240 ** 55 112 164 232

128QAM 34-36 68 138 196 287 - ** 128 - 136 188 264

256QAM - 79-86 161-174 229-245 335-363 - - 144 - 160 - 312 - 348

CFIP PhoeniX Split Mount IDU Interaces

CFIP PhoeniX M IDU Interaces

CFIP PhoeniX and CFIP PhoeniX M IDU total payload capacity (Mbps)

Ethernet port 4xRJ-45 (Gigabit Ethernet electrical)

E1 20xE1 (RJ-45)

Power IDU power connector

Serial Port DE9 (RS-232)

EOW 2x 3.5mm headset ports (Mic&Speaker)

Alarm port DB26HD

1+1 Port RJ-45

Connection to ODU N-Type

B a s e M o d u l e s

Standard Base -Link capacity: 50 / 100 / 155Mbps A standard module provides connectivity up to 155Mbps. By adding an expansion module – up to

37 x E1. Interaces: • 14 x E1, high-density Molex connector; • 2 x E1, RJ-48C connector;

• Voice, Data ORW RJ-48C connectors; • 100BaseTX, 25-100 Mbps, two RJ-45 portsEnhanced Base - supports ADM up to

63E1 via STM-1

42E1 BaseProvides 63E1 capacity with 21E1 expansion module.Interaces: • 42 x E1, 3x high-density Molex

connector; • Voice, Data ORW RJ-48C connectors; • 100BaseTX, 25-100 Mbps, two RJ-45 ports

GigE BaseProvides connectivity or Gigabit Ethernet. Interaces:

• 4x10/100/1000Base-T ports with RJ-45 connector;

• Ethernet SFP port;• 2 x E1, RJ-48C connector;

• Voice, Data ORW RJ-48C connectors

Enhanced GigE Base with jumbo

rames up to 9000 bytes packetEnhanced GigE Base - supports ADM

up to 63E1 via STM-1

O p t i o n a l M o d u l e s

16E1 Expansion module • 14 x E1, high-density Molex connector; • 2 x E1, RJ-48C connector

21E1 Expansion module 21 x E1, 2x high-density Molex connector

STM-1 Optical mini moduleSTM-1, Single mode 1310 nm, SC Duplex Transceiver. Unconditionally eyesae laser IEC 825/CDRH

Class 1 Compliant

STM-1 Electrical mini module STM-1, 2xBNC, ITU-T Rec. G.703, 75 Ω

2xSTM-1 Optical expansion module2xSTM-1, Single mode 1310 nm, SC Duplex Transceiver. Unconditionally eyesae laser IEC 825/

CDRH Class 1 Compliant

2xSTM-1 Electrical expansion module 2xSTM-1, 2xBNC, ITU-T Rec. G.703, 75 Ω

2xSTM-1 SFPE module 2 SFP ports or connection various optical or electrical adapters corresponding to STM-1 standards

M o d e m

Unied Band Modem

• 7-56 MHz, QPSK - 256QAM,

• RJ-45 (XPIC),

• TNC (connection to ODU)

* Capacities are subject to change ** Under development

8/2/2019 20111210 SAF CFIP Brochure

http://slidepdf.com/reader/full/20111210-saf-cfip-brochure 6/8

nHigh capacity system with up to 20E1 and up to 363 Mbps

Gigabit Ethernet - ideal or building hybrid networks to

acilitate transition rom TDM to IP;

nIndustrial grade anless design increases reliability and

enables low power consumption;

nLeading edge technology utilizing 256QAM modulation

and 56MHz channel bandwidth allows high capacity

throughput up to 366 Mbps;

nExcellent upgrade or existing PDH split mount systems;

nUp to 4094 concurrent VLAN trafc allows building many

port-to-port networks paths or specic client services;

n Jumbo rame size support (up to 9728 bytes), allows

using longer header ino (VLAN, MPLS) and transmitting

more useul content and less headers, thus gaining on total

throughput.

CFIP PhoeniX Highlights

nExcellent system gain allows to efciently upgrade PDH

radios to 108 Mbps capacity without increasing antenna

sizes;

nLow power consumption enables Power over Ethernet anduse o solar/wind energy;

nACM and ATPC or high availability and high density

deployments;

nVery high fexibility allows to congure the system to

various channel bandwidths, modulation schemes and

capacity settings.

nSNMP support or remote network monitoring and mana-gement.

CFIP-108 FODU Highlights

nLeading edge technology with up to 256QAM modu-

lation and 56MHz channel bandwidth allows high

capacity throughput up to 366 Mbps (per radio);

nOptical Ethernet connections provide excellent protec-

tion against lightning strikes and allow long distances

between user equipment and the radio;

n2 Gigabit Ethernet ports provide the convenience o

having separate ports or management (both basic and

advanced) and user trafc;

nUp to 4094 concurrent VLAN trafc allows building many

port-to-port networks paths or specic client services;

n Jumbo rame size supports up to 9728 bytes, which

allows using longer header ino (VLAN, MPLS) and

transmitting more useul content and less headers, thus

gaining on total throughput;

nACM and ATPC or high availability and high density

deployments.

CFIP Lumina Highlights

nRing conguration with built-in add-drop unctionality or

up to 63E1;

n348Mbps radio (56MHz) or capacities o up to 933 Mbps

per link in 3+0 conguration;

n63E1 + 25-30Mbps Ethernet with a single ODU (28 MHz);

nEasy upgrade o existing set-up to 1+1 or 2+0, 3+0, 4+0

congurations with GigE.

CFIP PhoeniX M Highlights

8/2/2019 20111210 SAF CFIP Brochure

http://slidepdf.com/reader/full/20111210-saf-cfip-brochure 7/8

SAF CFIP-108, CFIP Lumina and CFIP PhoeniX ODU max Tx Power

Application diagram o CFIP Products

Application diagram o CFIP PhoeniX M

Modulation Standard/High Tx Power, dBm

6, 7, 8 GHz 10, 11, 13, 15 GHz 18, 23, 26 GHz 24 GHz 38 GHz

QPSK +19 / +27 +19 / +25 +19 -20 to 0 +12

16APSK +18 / +26 +18 / +24 +18 -20 to -1 +11

32APSK +17 / +25 +17 / +23 +17 -20 to -2 +10

64QAM +15 / +23 +15 / +21 +15 -20 to -4 +8

128QAM +15 / +23 +15 / +21 +15 -20 to -4 +8

256QAM +12 / +20 +12 / +17 +12 -20 to -7 +5

8/2/2019 20111210 SAF CFIP Brochure

http://slidepdf.com/reader/full/20111210-saf-cfip-brochure 8/8