1
flexible tapes Epoflex® Protection tape 215.01 215.01 2 28C11 Value Test norm 128 Thickness mm 0.19 ± 0.04 IEC 60371-2 228 Total weight g/m² 220 ± 25 IEC 60371-2 428 Polyester fleece g/m² 40 ± 5 IEC 60371-2 528 Resin content g/m² 180 ± 20 IEC 60371-2 628 Tensile strength N/cm 40 IEC 60371-2 728 Elongation % 10 IEC 60371-2 928 Breakdown voltage kV 3.0 IEC 60371-2 0128 Thermal class F(155°C) 0128 Min shelf life at 20°C Months 6 0128 Min shelf life at 5°C Month 12 En 11 28 Form of delivery The typical dimensions of Epoflex® 215.01 are 15mm, 20mm, and 25mm wide in 50 or 100m rolls. Other sizes are available on request. We propose a range of cores according to the separate data sheet. En 12 28 Processing We recommend to apply Epoflex® 215.01 half lapped . The separate polyethylene dividing foil must be removed during winding. An optimal protection is achieved by hardening the coils or bars at a temperature of 160°C during 8 hours. Due to the exceptional elasticity and to the slight adhesive polyester fleece, this band can be easily applied manually. En 13 28 Health and safety Epoflex® is non toxic. We recommend however, that good hygiene practices, including hand washing and the use of barrier and cleansing creams is adopted. En 21 28 Liability - The information on this data sheet is to be understood as a guideline and has a general line. It is not binding for VRI and it justifies in no case any liability for VRI. VRI reserves the right to change the information at any time. 28C11 12 Coil and bar protection tape for Resin Rich and Soft cell applications E 22 Slightly adhesive surface E 32 Very flexible and elastic E 42 Ideal for complex forms E 52 Used for very high voltages E En 1 28 Description Epoflex® 215.01 is composed of polyester fleece and a B-stage Epoxy resin pigmented red-brown. En 2 28 Application Epoflex® 215.01 is used as a final layer in the winding of electrical machines as a protection tape when using Resin Rich and Soft Coil Systems. En 3 28 Characteristics Epoflex® 215.01 shrinks under temperature, compressing the main wall insulating tapes. In this way the thermal and electrical properties of coils or bars can be considerably improved. At the same time this tape provides a substantial protection against moisture and environmental pollutants. EIM - Electrical Insulating Materials The Swiss Insulating Works Ltd. CH-4226 Breitenbach / Switzerland Phone: +41 61-785 51 11 Fax: +41 61-785 51 88 e-mail: [email protected] SIB 28C11 Eng

215.01 flexible tapes - PH - Pailamilla e Hijos · flexible tapes Epoflex® Protection tape 215.01 215.01 2 Value Test norm28C11 Thickness mm 0.19 ± 0.04 IEC 60371-2128 Total weight

  • Upload
    dodan

  • View
    214

  • Download
    0

Embed Size (px)

Citation preview

Page 1: 215.01 flexible tapes - PH - Pailamilla e Hijos · flexible tapes Epoflex® Protection tape 215.01 215.01 2 Value Test norm28C11 Thickness mm 0.19 ± 0.04 IEC 60371-2128 Total weight

flexible tapesEpoflex® Protection tape215.01

215.01

2 28C11Value Test norm128Thickness mm 0.19 ± 0.04 IEC 60371-2

228Total weight g/m² 220 ± 25 IEC 60371-2

428Polyester fleece g/m² 40 ± 5 IEC 60371-2

528Resin content g/m² 180 ± 20 IEC 60371-2

628Tensile strength N/cm ≥40 IEC 60371-2

728Elongation % ≥10 IEC 60371-2

928Breakdown voltage kV ≥3.0 IEC 60371-2

0128Thermal class F(155°C)

0128Min shelf life at 20°C Months 6

0128Min shelf life at 5°C Month 12

En

1128Form of deliveryThe typical dimensions of Epoflex® 215.01 are 15mm, 20mm, and 25mm wide in 50 or 100m rolls. Other sizes are available on request. We propose a range of cores according to the separate data sheet.

En

1228ProcessingWe recommend to apply Epoflex® 215.01 half lapped . The separate polyethylene dividing foil must be removed during winding. An optimal protection is achieved by hardening the coils or bars at a temperature of 160°C during 8 hours. Due to the exceptional elasticity and to the slight adhesive polyester fleece, this band can be easily applied manually.

En

1328Health and safetyEpoflex® is non toxic. We recommend however, that good hygiene practices, including hand washing and the use of barrier and cleansing creams is adopted.

En2128Liability - The information on this data sheet is to be understood as a guideline and has a general line. It is not binding for VRI and it justifies in no case any liability for VRI. VRI reserves the right to change the information at any time.

28C111 2Coil and bar protection tape for Resin Rich and Soft cell applications

E

2 2Slightly adhesive surfaceE

3 2Very flexible and elasticE

4 2Ideal for complex formsE

5 2Used for very high voltagesE

En128DescriptionEpoflex® 215.01 is composed of polyester fleece and a B-stage Epoxy resin pigmented red-brown.

En228ApplicationEpoflex® 215.01 is used as a final layer in the winding of electrical machines as a protection tape when using Resin Rich and Soft Coil Systems.

En328CharacteristicsEpoflex® 215.01 shrinks under temperature, compressing the main wall insulating tapes. In this way the thermal and electrical properties of coils or bars can be considerably improved. At the same time this tape provides a substantial protection against moisture and environmental pollutants.

EIM - Electrical Insulating MaterialsThe Swiss Insulating Works Ltd.CH-4226 Breitenbach / Switzerland

Phone: +41 61-785 51 11Fax: +41 61-785 51 88e-mail: [email protected]

SIB 28C11 Eng