1
2200 SERIES GRAVITY ROLLER CONVEYORS Features & Specifications • Loads up to 80 lbs/ft* (119 kg/m) Conveyor load capacity depends on conveyor size, incline, accumulated loads and other factors. • Conveyor Widths: 6" (152 mm), 12" (305 mm), 18" (457 mm) and 24" (610 mm) • Conveyor Lengths: 2' (610 mm) to 12' (3,658 mm) in 6" (152 mm) increments • Rollers: 1" (25 mm) diameter rollers on 1.2" (31 mm), 2.4" (61 mm) or 3.6" (91 mm) centers Anodized aluminum tube with steel ball bearing • Side T-slot fits Dorner drop in hardware • Lower T-slot fits standard M6 square nuts • Standard lengths available in 6" increments DORNER MFG. CORP. PO Box 20 • 975 Cottonwood Ave. Hartland, WI 53029 USA INSIDE THE USA TEL: 800.397.8664 FAX: 800.369.2440 OUTSIDE THE USA TEL: 262.367.7600 FAX: 262.367.5827 © Dorner Mfg. Corp. 2017. All Rights Reserved. Made in the U.S.A. 851-807 Rev B - D.O. www.dorner.com [email protected] Move loads efficiently and economically without the need for power! • T-slot integrates with stand, eliminating the need for mounting brackets • Ergonomically designed to reduce injury • Ideal for case and tote handling • Light weight yet durable frame design • Optional end stop available * All conveyors are shipped with a roller at each end. Depending on roller centers, one odd roller space may occur. All frames are punched for rollers 0.6" (15) from each end on 1.2" (31) centers. W - 1.02 (26) W + .47 (12) 0.60 (15) 0.60 (15) 2.06 (52) 2.00 (51) 1.56 (40)

2200 SERIES GRAVITY ROLLER CONVEYORS · 2200 SERIES GRAVITY ROLLER CONVEYORS Features & Specifications • Loads up to 80 lbs/ft* (119 kg/m) • Conveyor load capacity depends on

  • Upload
    others

  • View
    16

  • Download
    0

Embed Size (px)

Citation preview

Page 1: 2200 SERIES GRAVITY ROLLER CONVEYORS · 2200 SERIES GRAVITY ROLLER CONVEYORS Features & Specifications • Loads up to 80 lbs/ft* (119 kg/m) • Conveyor load capacity depends on

2200 SERIESGRAVITY ROLLER CONVEYORS

Features & Specifications• Loads up to 80 lbs/ft* (119 kg/m) • Conveyor load capacity depends on conveyor size, incline, accumulated loads and other factors.• Conveyor Widths: 6" (152 mm), 12" (305 mm), 18" (457 mm) and 24" (610 mm)• Conveyor Lengths: 2' (610 mm) to 12' (3,658 mm) in 6" (152 mm) increments• Rollers: • 1" (25 mm) diameter rollers on 1.2" (31 mm), 2.4" (61 mm) or 3.6" (91 mm) centers • Anodized aluminum tube with steel ball bearing• Side T-slot fits Dorner drop in hardware• Lower T-slot fits standard M6 square nuts• Standard lengths available in 6" increments

DORNER MFG. CORP.PO Box 20 • 975 Cottonwood Ave.Hartland, WI 53029 USA

INSIDE THE USATEL: 800.397.8664FAX: 800.369.2440

OUTSIDE THE USATEL: 262.367.7600FAX: 262.367.5827

© Dorner Mfg. Corp. 2017. All Rights Reserved. Made in the U.S.A. 851-807 Rev B - D.O.

[email protected]

Move loads efficiently and economically without the need for power!• T-slot integrates with stand, eliminating the need for mounting brackets• Ergonomically designed to reduce injury• Ideal for case and tote handling• Light weight yet durable frame design

• Optional end stop available

* All conveyors are shipped with a roller at each end. Depending on roller centers, one odd roller space may occur. All frames are punched for rollers 0.6" (15) from each end on 1.2" (31) centers.

W - 1.02 (26)

W + .47 (12)

2.06 (52) 2.00 (51)

0.60(15)

0.60 (15)

1.56 (40)

W - 1.02 (26)

W + .47 (12)

2.06 (52) 2.00 (51)

0.60(15)

0.60 (15)

1.56 (40)

W - 1.02 (26)

W + .47 (12)

2.06 (52) 2.00 (51)

0.60(15)

0.60 (15)

1.56 (40)