Power Supplies

Bench Power Supplies 820DC/DC & AC/DC Converters 833Desktop Power Supply Units 832Plug-in Power Supplies 829

23

VC650BT Desktop Multimeter

4mm Stackable Test Leads

2m Figure 8 Socket 3A Fused Cordset

IEC Socket to 13A Plug Cordsets

4mm Stackable Plugs to Miniature Shrouded Crocodile Clips 50cm

IEC Extension Cordsets

Digital Multimeter 2000 counts CAT III 250V

4mm Banana Plugs

2m Right Angle IEC To 5A UK Plug Cordset

4mm Stackable Test Leads 500mm

Only £198.50

From only £2.17

From only £1.16

From only £1.53

From only £0.622From only £0.858

Only £15.08

From only £0.288

From only £1.77

Only £0.531Page 1075

Page 761

Page 760

Page 747 Page 1069

Page 746

Page 756

Page 747

Page 760

Page 746

Associated products

820

Power Supplies820El

ectr

ical

& P

ower

23

Tel: 01206 751166 Fax: 01206 751188

Pow

er S

uppl

ies

Operating FrequencyAdjustableAdjustablePower conContinuou

Protection Cable lengOperating Storage teDimensionWeight:Output voIdle state:Stability atRipple (5HOutput cuIdle state:Stability atRipple (5 Display acVoltage:Current:GeneralNo. of outpTechnologyPowerConnectioDimensionWeight

TypeSingle Ou

FixedA voltage for use industryelectron

Their stsuitableindustri

• Robu• 4mm• Powe• Powe• Linea• Elect• GuaraPower ca

Voltage DC12V24V13.8V13.8V13.8V13.8V13.8V13.8V

TypeFSP-1132FSP-1134FSP-1136FSP-1138FSP-1131FSP-1243FSP-1122FSP-1133

Fixed

power sworkshobe adjuundersisuitableconditio

• Availa• 3 yea• Supp

Max. pow60W 375W 525W 145W 240W 285W

5V 1A Regulated Power SupplyA sturdy regulated power supply delivering 5V at a maximum of 1A. Ideally suited to teaching bulb and switch work in both primary and secondary schools, and electronics teaching.

• Suitable for powering most electronics teaching kits• Output is delivered via colour coded 4mm terminals• Monitored by an LED which indicates normal/short

circuit conditions by its colour• Short circuit protected• An internal control allows the output to be preset within the range 5-8.5V• The supply is enclosed in a sturdy fully earthed steel case and is supplied complete

with mains lead and instructions• Dimensions 120 x 110 x 150mm

Output voltage +5VOutput current 1A max

Overload and short circuit protectedLoad regulation 0.1%Line regulation 0.05%Ripple 5mV rms maxMains input 210 to 250V 50/60HzWeight 1kg

Type Order code 1+5V 1A Supply 85-1725 58.27

065043

Dual Rail 100mA Regulated Power SupplyA rugged power supply offering dual rail voltage output with twice the current output usually available in units of this type.

• Output is 15-0-15V at 100mA per rail.• The unit is designed for powering operational

• Features short circuit protection and output status monitoring via tricolour LEDs• Output is via colour coded 4mm terminals• The supply is enclosed in a sturdy fully earthed steel case• Supplied complete with mains lead and comprehensive instruction manual• Ideal for laboratory and educational use• Dimensions 120 x 110 x 150mm

Output voltage +15, 0, -15VOutput current 100mA max per rail

Overload and short circuit protectedLoad regulation 0.1%Line regulation 0.1%Ripple 5mV rms maxMains input 210 to 250V 50/60HzWeight 850g

Type Order code 1+ 5+15V 100mA Supply 85-1720 62.54 58.72

065044

Bench PSU Single Output 0-15VDC 0-3A 45WThe Basetech BT-153 is a Laboratory Power Supply which is ideal for universal use in the research, development, manufacturing, service

number of features (automatic switching between constant voltage and constant current operation, continuously adjustable output voltage and current limit).

All the connections are made via the sockets on the front of the device. All operating controls and indicators have been neatly arranged to simplify use. The corresponding power and voltage values are easily visible on the high-contrast LED display. Both the output current and output voltage are shown via the LED displays.

The control dial on the front of the device is used to set current and voltages values.

What’s in the Box?Basetech BT-153Power cableOperating instructions

• Finely adjustable output voltage• Display of output voltage and current• Overload and reverse polarity protection• Display of output voltage and current• Overload and reverse polarity protection • 0 to 15V/DC/ 0 to 3A• 45W maximum output• Linearly-regulated• Automatic switching between constant voltage and constant current operation• Manufacturer’s part: Basetech BT-153

Bench Power Supplies

4-in-1 Universal Measuring Station

The Voltcraft UTS-1980 is a Universal Measuring Station that combines the four most commonly used devices for measuring and laboratory use, in one single device.

These are: 10MHz Function Generator, 2.7GHz Frequency Counter, True RMS Digital Multimeter and 3x Laboratory Power Supply.

This Measuring Station is ideal for repair shops, production, laboratory, training and hobby. The individual units can be controlled and used independently.

What’s in the Box?Voltcraft UTS-1980 50 adaptorMains cable 1 pair of test leadsBNC to BNC cable 1x fuse T 250V 4ABNC to alligator cable Quick start guide2x connection cable Operating instructions (detailed instructions)

• LCD display• 4 in 1 Measuring Station • 10MHz Function Generator • 2.7GHz frequency counter • True RMS Digital Multimeter • 3x laboratory power supply • Frequency generator: amplitude to 20Vpp • Attenuator: -20dB • DDS function generator with sine, square, ramp, pulse and TTL signal generation, sweep•

voltage +5V/ 2A • DMM: TrueRMS, 80000 counts• Measuring functions: AC/DC voltage, current AC/DC, resistance, capacitance,

temperature, frequency, diode test, beeper, damping• Manufacturer’s part: Voltcraft UTS-1980

Measuring rangesVoltage 1uV to 600V/ DC, 1uV to 450V/ ACCurrent 1uA to 10A/ DC ACResistance 0.01 to 1000mCapacity 50pF to 100uFTemperature –50°C to +1300°CSquare-wave output 0.5Hz to 5000Hz in 16 stepsLaboratory power supply Control output 0 to 30V DC / 0 to 3AFixed voltage output ±15V DC/ 1A, +5V DC/ 2AFrequency range 0.01Hz to 1000MHzRange capacity 1pF to 100uFTemperature –50°C to +1300°CInterfaces NOPower supply 110/230V/ ACCalibration possible to ISO / DKDDC internal resistance 10MAC internal resistance 10MDisplay (counts) 80000Measuring range V / AC max. 450VRange A / DC min. 1uAFrequency range 0.1Hz to 10MHzCurrent measurement AC/ DCVoltage measurement AC/ DCType of measurement True RMSRange A / AC min. 1uARange A / DC max. 0.41666666667Width 370mmRange A / AC max. 0.41666666667Display DigitalAccuracy reason ±% 0.001Height 165mmType UTS 1980Measuring range V/ DC min. 1uVMeasurement Category CAT II 600VWeight 12.5kgCategory Bench Multimeters

Type Order code 1+4-in-1 Station 52-0965 749.00

553677

Fast DeliveryAll orders for in-stock items received

by 7pm – Monday to Friday

are despatched the same day

821

Power Supplies 821Electrical &

Pow

er

23

www.rapidonline.com sales@rapidonline.com

Power S

upplies

LPS1305 Bench PSU Single Output 0 to 30VDC 0 to 5A 150WThe Voltcraft LPS1305 is an Electronically Stabilised Power Supply with individual adjustment of voltage and current.

The laboratory power supply unit serves as a potential free DC voltage source to operate low-voltage consumers. The devices are connected via 4mm safety sockets at the front.

The settings for current and voltage are made via step-less control knobs. Voltage settings are made

fast and precise setting of values. The values are displayed on two high-contrast LED displays. The current limit for constant current operation can be preset without a jumper. The device is overload and short-circuit-proof and contains a safety temperature cut-off.

What’s in the Box?Voltcraft LPS1305Operating manual

• Number of outputs: 1x • 0 to 30V DC • 0 to 5A • 150W • Residual ripple <5mV • • Linear• Manufacturer’s part: Voltcraft LPS1305

Output voltage 0 to 15V DCOutput current 0 to 3ADisplay resolution 0.1V, 0.01AAccuracy ‘V’ indicatorAccuracy ‘A’ indicatorMax. output power 45WResidual amplitude <5mVrms (rms = effective)Stability at outputControl behaviour under load changes 0 to 100% <10mV

<5mAControl behaviour under current changes ±10% <5mV

<5mAT1A / 250 (inert)

Operating temperature +5°C to +40°CRel. Humidity 85%, non-condensingMax. operating altitude 2000m above sea levelOperating voltage 230V (±10%), 50HzPower input max 112VAProtection class 1Dimensions 130(W) x 160(H) x 305(D)mmWeight 3.6kgLVD Directive 2006/95/EC EN 60950-1

Type Order code 1+ LPS1305 Bench PSU 64-9441 83.30

563797

Single Output 100W DC Power SupplyA range of portable single output 100W DC Power Supplies. They are variable DC switched mode

are available with a chouce of output voltages and currents.

The power supplies offer OVP (over voltage protection) to protect sensitive equipment from low residual ripple and automatic switching between constant voltage and constant current modes.

These portable power supplies are suitable for use in labs, education or in the hobbyist workshop.

• Outputs: 1• Max power: 100W• Voltage setting range: 0.4 to 20V DC• Current setting range: 0 to 5A• PSU Technology: Switched Mode• Supplied with 100W DC power supply and power cable• Type: Bench, Tower

Order code 51-6772 51-6773 51-6774Type LRP-1205 LRP-1363 LRP-1601Inputs 1 1 1Input voltage 230V AC 230V AC 230V ACInput voltage range 200 to 240V AC 200 to 240V AC 200 to 240V ACLoad control 20mA 20mA 20mAMains control 20mV 20mV 20mVNumber of outputs 1 1 1Output power 100W 100W 100WOutput current 0 to 5A 0 to 3A 0 to 1.6AOutput voltage 0.4 to 20V DC 1 to 36V DC 1 to 60V DCDimensions W x H x D (mm) 70 x 150 x 250 70 x 150 x 250 70 x 150 x 250Weight 2kg 2kg 2kg

Type Order code 1+LRP-1205 51-6772 109.00LRP-1363 51-6773 109.00LRP-1601 51-6774 109.00

526006

Operating voltage: 230V AC, 50Hz (±10%)Frequency: 50Hz (±2Hz)Adjustable output voltage: 0 to 15V DCAdjustable output current: 0 to 3APower consumption: 100W max.Continuous operation: 8 hours max.

Fuse: 1A, 250 V (T1AL250V)Protection class: ICable length: 1.8mOperating temperature/humidity: 0°C to +40°C, <90% RHStorage temperature/humidity: -10°C to +70°C, <70% RHDimensions: 112(W) x 165(H) x 265(D)mmWeight: 2.6kgOutput voltageIdle state:Stability at 10 to 100% load:Ripple (5Hz to 1MHz):Output currentIdle state:Stability at 10 – 100 % load:Ripple (5 Hz to 1 MHz):Display accuracyVoltage: ±1% + 2 digitCurrent: ±2% + 2 digitGeneralNo. of outputs 1 xTechnology Linear regulated PSUPower 45WConnections 4mm banana jackDimensions: 105(W) x 155(H)mmWeight 2.4kg

Type Order code 1+Single Output PSU 64-6084 56.50

561347

Fixed Voltage Linear Power Supply, BenchA voltage linear power supplies suitable for use in laboratories, workshops and industry. These power supplies are electronically regulated.

Their steel plate enclosure makes them suitable for use even in demanding industrial conditions.

• Robust steel plate housing• 4mm output sockets• Power switches• Power indicator• Linear technology• Electronically regulated• Guaranteed for 3 yearsPower cable is not included. For a suitable cable (order code 23-6446)

Voltage DC Output power Amps DC Consumption Mftrs. Part Order code12V 25W 2(4)A 50W FSP-1122 51-750224V 72W 3(5)A 120W FSP-1243 51-750113.8V 30W 2(4)A 60W FSP-1132 51-749613.8V 55W 4(6)A 100W FSP-1134 51-749713.8V 85W 6(8)A 140W FSP-1136 51-749813.8V 110W 8(10)A 180W FSP-1138 51-749913.8V 165W 12(15)A 400W FSP-11312 51-750013.8V 415W 30(32)A 680W FSP-11330 51-7504

Type Order code 1+FSP-1132 51-7496 35.87FSP-1134 51-7497 48.49FSP-1136 51-7498 53.24FSP-1138 51-7499 59.80FSP-11312 51-7500 89.50FSP-1243 51-7501 48.35FSP-1122 51-7502 45.03FSP-11330 51-7504 167.50

526121

Fixed Voltage Switch Mode Power Supply, Bench

power supplies suitable for use in laboratories, workshops and industry. The output voltage can be adjusted via the potentiometer on the PSU’s underside. Its steel plate enclosure makes them suitable for use even in demanding industrial conditions.

• Available up to 540W• 3 year warranty• Supplied with user manual

Max. power Output current Order code 1+60W 4A 51-7536 34.15375W 25A 51-7539 84.90525W 35A 51-7540 135.95145W 5A 51-7541 70.77240W 10A 51-7542 85.16285W 5A 51-7544 63.39

526128

plete

065043

s

065044

ontrast splays.

es.

822

Power Supplies822El

ectr

ical

& P

ower

23

Tel: 01206 751166 Fax: 01206 751188

Pow

er S

uppl

ies

OVP LineaThe VLPVoltcrafregulateseparatregulatocharactand gooregulatiVLP sercooled fans.

• Adjus• Input• Input• • PSU T• Type: • Fan le• Can bPlease N

Mftrs Part Order codeNumber ofWeight:Power:Inputs:Output volOutput volConnectioCan be ca

Input voltaOutput curOutput curType:Dimension

Mftrs Part Order codeNumber ofWeight:Power:Inputs:ConnectioCan be ca

Input voltaOutput curOutput curOutput curDimensionOutput volOutput volOutput volType:

TypeVLP-1303VLP-1405VLP-2403VLP-2602

160W10A

These lafeature the fronsoftwar

and theoperatetimes.

• 160W• Choic• Prote• Voltag• DC O• Overl• Short• Safet

PS-1302 D, 60W Single Output Variable DC Power Supply, Linear, BenchThe PS-1302 D from Voltcraft is a basic single output bench power supply that is particularly suitable for education and hobby purposes. This linear regulated PSU offers adjustable voltage 0V to 30V and current limit 0A to 2A. Set values are displayed on the PSUs LCD display.

• Overheating protection• Short circuit protection• Adjustable current limiting • Outputs: 1• Max power: 60W• Voltage setting range: 0V to 30V DC• Current setting range: 0A to 2A• Convection cooled, rear heatsink, no fans• PSU Technology: LinearPlease order the appropriate power cable under order code 23-6446 or 35-4485.DC bench power supply · User manual · Power cable not included, please order separately.

Calibration possible to ISO/ DKDConnections 4 mm safety socketsDimensions 207(W) x 105(H) x 215(D)mmInput voltage range 230V ACInputs IEC 320 C14Number of outputs 1Output current 1 0A to 2AOutput voltage 1 0V to 30V DCPSU type LinearPower 60W

BenchType (manufacturer type) PS-1302 DWeight 3.2kg

Type Order code 1+Voltcraft PS-1302 D 51-1824 88.40

523912

DC Power SuppliesA range of electronically regulated DC bench power supplies from Voltcraft’s reliable VLP series. All PSUs in this series boast excellent residual ripple, load stabilisation and power control values.

• Bench type• Digital LCD display• Short circuit protection• Overheating protection• Convection cooled (no fans)Cable required - available separately as Rapid part 23-0698.

Order code 51-2174 51-2175 51-2176Calibration possible to ISO / DKD ISO / DKD ISO / DKDConnections 4mm safety sockets 4mm safety sockets 4mm safety socketsDimensions 255(W) x 95(H) x 245(D)mm 350 (W)x 110(H) x 245(D)

mm435(W) x 110(H) x 245(D)mm

Input voltage 230V AC 230V AC 230V ACInputs IEC C14 device connector IEC C14 device connector IEC C14 device connectorNumber of outputs 2 2 3Output current 1 0A to 3A 0A to 3A 0A to 3AOutput current 2 2A 0A to 3A 0A to 3AOutput current 3 none none 2AOutput voltage 1 0V to 30V 0V to 40V 0V to 40VOutput voltage 2 3V to 6V 0V to 40V 0V to 40VOutput voltage 3 none none 3V to 6VPSU type Linear Linear LinearPower 102W 240W 252WResidual ripple <2mV <2mV <2mV

Bench Bench BenchType (manufacturer type) VLP 1303pro VLP 2403 VLP 2403proWeight 4.6kg 9kg 11kg

Type Order code 1+VLP 1303pro 51-2174 142.25VLP 2403 51-2175 247.70VLP 2403pro 51-2176 272.64

524072

100W Single Output DC Power SupplyA range of Voltcraft 100W Single Output DC Power Supplies from the LSP series. These power supplies feature a highly developed switched mode

They are slim line and lightweight in design (2kg) meaning they consume little space in workshops or labs and can be easily transported.

All models have a convenient backlit 4 digit LCD display. OVP (over voltage protection) integrated on the outputs, offering protection from potentially harmful voltage spikes.

• Available in a choice of output voltages and currents

• PSU Technology: Switched Mode• Type: BenchCable supplied.

Order code 51-6777 51-6778 51-6779Type LSP-1205 LSP-1363 LSP-1601Inputs 1 1 1Input voltage 230V AC 230V AC 230V ACInput voltage range 200 to 240V AC 200 to 240V AC 200 to 240V ACLoad control 20mA 20mA 20mAMains control 20mV 20mV 20mVNumber of outputs 1 1 1Output power 100W 100W 100WOutput current 0 to 5A 0.15 to 3A 0 to 1.6AOutput voltage 1 to 20V DC 1 to 36V DC 1 to 60V DCDimensions W x H x D (mm) 70 x 150 x 250 70 x 150 x 250 70 x 150 x 250

Type Order code 1+LSP-1205 51-6777 119.00LSP-1363 51-6778 119.00LSP-1601 51-6779 119.00

526008

PS-1152A, 22.5W Single Output DC Bench Power Supply, Linear, VariableAt just 16cm wide, the Voltcraft PS-1152A makes an ideal basic space saving bench power supply for lower voltage ranges from 1.5V to 15V.

This electronically regulated linear power supply has a

The PS-1152A is protected against overheating and short circuit. The PSU is convection cooled.

• Overheating protection• Short circuit protection• Outputs: 1• Max power: 22.5W• Voltage setting range: 1.5 to 15V DC• Current limit: 1.5A• Analogue display• Convection cooled• PSU Technology: LinearDC bench power supply • Manual • Power cable not included

Calibration possible to: ISO / DKDConnections: 4mms security socketsDimensions: 135(W) x 88(H) x 167(D)mmInput voltage range: 230V ACInputs: IEC 320 C14Number of outputs: 1Output current 1: 1.5AOutput power: 22.5WOutput voltage 1: 1.5 to 15V DCPSU type: LinearPower: 22.5W

BenchType (manufacturer type): PS-1152 AWeight: 1.9kg

Type Order code 1+Voltcraft PS-1152A 51-1823 41.54

523911

Page 760

4mm Stackable Leads

823

Power Supplies 823Electrical &

Pow

er

23

www.rapidonline.com sales@rapidonline.com

Power S

upplies

• Includes USB cable, remote connection plug, output line, software

Order code 63-9508 63-9509Operating voltage 100 to 240V AC 100 to 240V ACInput current 2.3A 2.3AOutput power 160W 160WOutput voltage 0 to 42V DC 0 to 84V DCOutput current 0 to 10A 0 to 5APerformance with active PFC >0.91 >0.91Operating temperature 0°C to +40°C 0°C to +40°CDimensions 200 x 90 x 250mm 200 x 90 x 250mm

Type Order code 1+PSU 10A 42V 63-9508 292.40PSU 5A 84V 63-9509 271.90

554894

HPS Series Variable DC Power Supplies with Remote ControlA selection of DC PSU’s from the Voltcraft HPS series of high power DC bench power supplies. These power supplies are extremely compact thanks to their primary switched mode technology. They are all full rated, with a current range of 0A to 30A via the PSU’s rear output, while its front output provides current limited to 5A.

Select from 4 operating modes: Normal, Preset, Remote Control and Set. In Normal mode, settings are made using the front panel. In Preset mode, stored settings are used and the front panel becomes inactive. Set mode is used to programme the 3 presets using the front panel controls. In Remote Control mode, the power supply responds to external DC voltage signals to alter Voltage, Current, and Output On/Off.

• Available with either 900W, 450W or 600W• Voltage setting range(s): 1V DC to 30V DC• Current setting range(s): 0A to 30A• High contrast digital LCD display for voltage and current• • Remote control via external DC voltage• • PSU Technology: Switched Mode• Type: BenchDC bench power supply • Power cable • Remote control plug connection • User manual.

Order code 51-2163 51-2164 51-2165Calibration possible to ISO / DKD ISO / DKD ISO / DKDConnections 4mm Safety socket, 4mm

Screw terminal socket4mm Safety socket, 4mm Screw terminal socket

4mm Safety socket, 4mm Screw terminal socket

Dimensions 200(W) x 90(H) x 275(D)mm 200(W) x 90(H) x 215(D)mm 200(W) x 90(H) x 215(D)mmInput voltage range 230V AC 230V AC 230V ACInputs Low-power device-panel plug,

IEC 320 C14Low-power device-panel plug, IEC 320 C14

Low-power device-panel plug, IEC 320 C14

Load control <50mV <50 mV <50mVMains control <20mV 20mV <20mVNumber of outputs 1 1 1Output current 1 0A to 30A 0A to 15A 0A to 10AOutput voltage 1 1V DC to 30V DC 1V DC to 30V DC 1V DC to 60V DCPSU type Switched Mode Switched Mode Switched ModePower 900W 450W 600WResidual ripple <5 mV <5mV <5 mV

Bench Bench BenchType (manufacturer type) HPS-13030 HPS-13015 HPS-16010Weight 3.2kg 2.6kg 2.6kg

Type Order code 1+900W 51-2163 367.74450W 51-2164 186.16600W 51-2165 248.56

524069

OVP Dual Output Variable DC Power Supply, Linear, BenchThe VLP OVP range from Voltcraft is an electronically regulated power supply with separate voltage and current regulators. The devices are characterized by low ripple and good load and power regulation. All models in the VLP series are convection cooled so they do not have fans.

• Adjustable: OVP (Over Voltage Protection)• Input voltage: 230V• Inputs:IEC C14 device connector• • PSU Technology: Linear• Type: Bench• Fan less convection cooling• Can be calibrated to: ISO / DKDPlease Note: Power cable not included.

Mftrs Part No: VLP1303 VLP1405Order code 51-7163 51-7164Number of outputs: 2 2Weight: 4.6kg 7.5kgPower: 102W 212WInputs: IEC C14 device connector IEC C14 device connectorOutput voltage 1: 0 to 30 V 0 to 40 VOutput voltage 2: 3 to 6 V 3 to 6 VConnections: 4mm safety sockets 4mm safety socketsCan be calibrated to: ISO / DKD ISO / DKD

Bench BenchInput voltage: 230V AC 230V ACOutput current 1: 0 to 3A 0 to 5AOutput current 2: 2A 2AType: Linear LinearDimensions: 255(W) x 110(H) x 245(D)mm 350(W) x 110(H) x 245(D)mm

Mftrs Part No: VLP2403 VLP2602Order code 51-7166 51-7167Number of outputs: 3 3Weight: 11kg 12kgPower: 252W 252WInputs: IEC C14 device connector IEC C14 device connectorConnections: 4mm safety sockets 4mm safety socketsCan be calibrated to: ISO / DKD ISO / DKD

Bench BenchInput voltage: 230V AC 230V ACOutput current 1: 0 to 3A 0 to 2AOutput current 2: 0 to 3A 0 to 2AOutput current 3 2A 2ADimensions: 435(W) x 110(H) x 245(D)mm 435(W) x 110(H) x 245(D)mmOutput voltage 1: 0 to 40V 0 to 60VOutput voltage 2: 0 to 40V 0 to 60VOutput voltage 3 3 to 6V 3 to 6VType: Linear Linear

Type Order code 1+VLP-1303 51-7163 155.10VLP-1405 51-7164 210.45VLP-2403 51-7166 293.60VLP-2602 51-7167 299.50

526081

160W Remote Control Laboratory SM Power Supplies 10A 42V/5A 84V

These laboratory grade programmable switch mode power supplies are bench PSUs that feature 160W constant voltage or constant current operation that can be controlled via the front panel or by remote control via the supplied USB interface and the supplied PC software. There is a large LCD display and backlit keypad and the digital rotary knobs

and the PSUs have 20x programmable voltage and current work sets that can be set to operate cyclically via the supplied software. The work set may be repeated up to 999 times.

• 160W Power• Choice of 10A 42V or 5A 84V output• Protection class 1• Voltage or current settable via external voltage or potentiometer• DC Output switchable via switching contact• Overload protection• Short circuit protection• Safety and temperature shutdown

523912

245(D)

ector

524072

Page 1069

VC130-1 Digital Multimeter

824

Power Supplies824El

ectr

ical

& P

ower

23

Tel: 01206 751166 Fax: 01206 751188

Pow

er S

uppl

ies

• Curre• Adjus• Overl• Robu• Polyc• • Appro

Order codeInput voltaOutput volRated outpOutput volOutput volRipple andLoad reguLine regulaCooling syDimensionWeight

Type Triple o/p

0-30This verdesigneservicinclassrooconstanconstanmodes.

voltage

• One 0• One 5

500m• Sepa

amm• Curre• Adjus• Overl• Comp• Robu• Polyc• • Appro

Input voltaOutput volRated outpOutput volOutput volRipple andLoad reguLine regulaCooling syDimensionWeight

Type Triple o/p

DigitHY30A rangeSupplieTriple OThese pindepenof them0-30V a5A, whiof 5V D

Both securrent.highest

In the lo

earth co

The devoutput

The ranscience30V is

• Micro• Lock-• Displ• Input

6A AC/DC Power SupplyThis addition to our range offers AC voltages of 2, 4, 6, 8, 10 or 12V and capacitor smoothed (10,000μF), DC voltages of 1, 4, 7, 10, 13 or 15V.

• Separate AC and DC colour coded terminals are provided

• AC and DC voltages may be used simultaneously up to a maximum combined load of 6 amps

• An earth terminal is also provided should rail clamping be required

• Voltages are selected by a six position keyswitch – the key is removable in any position

• • The output voltage is monitored by a sophisticated system which detects overloads,

short circuits and cuts power to the terminals under these conditions• Tripping is indicated by a buzzer sounding and the output monitor LED turning from

green to red, thereby allowing the teacher to locate the tripped unit from across the room

• Reset is achieved by switching off the mains switch for 5 seconds• Unit comes housed in a rugged steel case with carrying handle and is stackable• Mains input is via a rear panel mounted, fused IEC connector and a detachable IEC

lead with moulded mains plug

Output voltage DC: 1, 4, 7, 10, 13 or 15VAC: 2, 4, 6, 8, 10 or 12V

Output current 6A maximumOverload and short circuit protected

Smoothing 10,000μFMains input 210 to 250V 50/60HzWeight 1.5kg

Type Order code 1+ 5+ 10+6A AC/DC Supply 85-1740 153.18 142.97 134.03

065048

4A 13.8V Fixed Output DC Cigar Socket Power SupplyA low power, DC regulated power supply that is designed for use with 13.8V DC equipment, such as communications, automotive and marine equipment. Its advanced design mean that this unit is cost effective yet gives good performance with high stability and reliability.

• Fixed 13.8V DC output• Screw connectors and 12V cigarette

lighter accessory socket• High stability• Low ripple and noise• Compact size• Overload and short circuit protection• Galvanised steel case• Polycarbonate front panel• Cooled by natural convection• Approved to CE, EN60065, EN55014

Order code 85-1714Input voltage 230V AC 50HzFixed output voltage 13.8V DCRated output current 4APeak output current 6ARipple and noise 6mVLoad regulation 130mVLine regulation 320mVDimensions 160 x 92 x 165mmWeight 3kg

Type Rated current Order code 1+Fixed o/p PSU 4A 85-1714 36.99

077155

10A 0-30V Triple Output Digital DC Regulated PSUThis supply has been designed for use in general electronic servicing in the laboratory, workshop and classroom. It can be used in either constant voltage with current limiting or constant current with voltage limiting modes. Features three independent

variable voltage.

• One 0-30V variable output• One 5V 500mA output and one

12V 500mA output• Separate digital voltmeter and

ammeter

Programmable Bench Power Supply Unit, 320WThe Voltcraft CPPS-320-84 is a Programmable Bench Power Supply Unit with adjustable output settings. The 160W power limit enables a wide range of output voltage/current settings for many applications.

The PSU also comes with a memory for the three most frequently used voltage and current settings. The USB port and included software enable the simulation of a wide range of sources and operating scenarios.

What’s in the Box?Voltcraft CPPS-320-84 Power cablesUSB cableRemote control jackSoftware CDUser manual

• Remote control via USB, external voltage sources and external potentiometers• Sense port• Backlit keypad• • Load display• Safety sockets• Wave or ramp output - output waveform can be selected via keypad or interface• Constant voltage (CV)• Constant current (CC)• 3 operating modes: standard, preset and remotely controlled (via USB/ext in)• USB control: auto-executes a maximum of 20 saved data sets with different time

settings and up to 999 cycles• Selectable over and under voltage protection• Sense function suppressing output voltage loss• Manufacturer’s part: Voltcraft CPPS-320-84

Operating voltage 100 to 240V AC, 45 to 65HzMax. input current (230 V/AC) <1,8AMaximum output power 320WOutput voltage 0 to 84V DCOutput current 0 to 10Voltage control response at 10 to 100 %

Current control response at 10 to 90% load change

Display accuracy ±(0,2% +5 counts) V/ADegree of effectiveness 85%Clock signal 44 to 55kHzPerformance factor with active PFCDevice fan Temperature controlled (0 to 100%)Mains fuse slow-blow (5 x 20mm) T3.15AL250VOperating temperature 0ºC to +40ºCOperating humidify 10% to 80%, non-condensingStorage temperature -15ºC to +70ºCStorage humidity 10% to 85%, non-condensingOperating altitude 2000m above mean sea level (N.N.)Safety class IWeight 2.3kgDimensions 200(W) x 95(H) x 245(D)mm

Type Order code 1+Bench PSU 64-9473 279.00

563798

Dual Rail 1A Regulated Power SupplyA versatile supply offering a wide range of stabilised DC voltages in both single and dual rail mode. The use of separate 4mm terminals for each of the positive and negative outputs gives the user eleven single rail voltages ranging from 3V to 30V and thirty three dual rail voltages (symmetrical and asymmetrical) in the range 5-0-5V to 15-0-15V.

• A maximum of 1A per rail is available• All outputs are short circuit protected• The supply is enclosed in a sturdy steel case

• Supplied with mains lead and a comprehensive user manual

• • Dimensions 140 x 125 x 240mm

Output voltage +15, +12, +5, 0, –5, –12, –15VOutput current 1A max per rail

Overload and short circuit protectedLoad regulation 0.1%Line regulation 0.05%Ripple 5mV rms maxMains input 210-250V 50/60HzWeight 1.65kg

Type Order code 1+Dual rail 1A supply 85-1715 96.34

065045

825

Power Supplies 825Electrical &

Pow

er

23

www.rapidonline.com sales@rapidonline.com

Power S

upplies

• Ripple and noise: CV 0.5mVrms • Protection: Reverse polarity protection, current restricted, or short-circuit protection • The dual output can be connected in parallel or series, series voltage or parallel

current is the sum value of dual output • Dimensions: 365 x 265 x 164mm• Triple output with • Available with output power of 0 to 2A, 0 to 3A, 0 to 5A• Supplied with an output voltage of 0 to 30V• Available models: Rapid HY3002-3, HY3003-3 and HY3005-3

Mftrs. Part No. HY3002-3 HY3003-3 HY3005-3Order code 85-1921 85-1922 85-1923Input Voltage 110/220V ±10%AC 110/220V ±10%AC 110/220V ±10%ACOutput Voltage 0 to 30V 0 to 30V 0 to 30VOutput Current 2x 0 to 2A 2x 0 to 3A 2x 0 to 5AFixed Output Yes, 5V, 3A Yes, 5V, 3A Yes, 5V, 3ALed Display YES YES YES

General to all modelsSource EffectLoad EffectRipple & NoiseFixed Output 5V/3ADisplay Two 3½ digit LCD displayAccuracyOperating temperature 0°C to +40°CSize 365 x 265 x 164mmWeight 8 to 13kg

Type Order code 1+ 5+HY3002-3, 0-2A 85-1921 135.69 113.99HY3003-3, 0-3A 85-1922 162.37HY3005-3, 0-5A 85-1923 188.99 158.75

554306

Digital Single Output Bench DC Power Supplies, HY3000M and HY5000M Series

A range of Rapid Digital Single Output Bench DC Power Supplies from the HY3000M and HY5000M Series. These Linear Mode variable DC power supplies are of very high quality construction.

The ‘M’ version uses Microprocessor Technology to allow the adjustment of the AMPS and VOLTS with ‘TOUCH’ technology instead of dials. The controls are splash and dirt resistant and when set they cannot be changed accidentally. The range is variable voltage, and variable current, and suitable for the laboratory, science projects, universities and schools or any other use where a stable voltage up to 30V or 50V is required.

The voltage is variable from 0 to 30V for the HY3000M and 0 to 50V for the HY5000M. The current is also variable from 0 to 5A.

The dual digital LED display meters display the actual voltage and current within 2.5 percent.

• • Microprocessor control• Lock-in voltage• Constant voltage and constant current• Serial and parallel tracking function (dual/triple series only)• Voltage and current dual display• Shining bright back light for LED display• Last setting memorizing after power off• Available with output power of 0 to 3A or 0 to 5A• Available with output voltage of 0 to 30V or 0 to 50V• Available models: HY3003M, HY3005M and HY5003M

Model HY3003M HY3005M HY5003MOrder code 85-1924 85-1925 85-1926Output Voltage 0 to 30V 0 to 30V 0 to 50VOutput Current 0 to 3A 0 to 5A 0 to 3AFixed Output No No NoType of Display LCD LCD LCD

General to bothInput voltage: 230V AC (50 to 60Hz)Power supply: AdjustableSource Effect CV<0.01%+3mVLoad Effect CC<0.5%+10mARipple and noise: CV<0.5mVrms CC<10mArmsAccuracy 2.50%Dimensions 291 x 158 x 136mm

Type Order code 1+HY3003M, 0-3A 85-1924 98.27HY3005M, 0-5A 85-1925 120.36HY5003M, 0-3A 85-1926 118.39

554304

• Current limiting LED indicator• Adjustable current control• Overload and short circuit protection• Robust, galvanised steel case• Polycarbonate front panel• • Approved to CE, EN61558, EN55014

Order code 85-1706Input voltage 230V AC 50HzOutput voltage variable 0-30V DCRated output current 10AOutput voltage 1 5V DC 500mA (max. 1A)Output voltage 2 12V DC 500mA (max. 1A)Ripple and noise 5mVLoad regulation 30mVLine regulation 10mVCooling systems Thermostatically controlled fanDimensions 205 x 125 x 280mmWeight 6.5kg

Type Rating Order code 1+Triple o/p PSU 10A 85-1706 121.45

077152

0-30V Triple Output DC Regulated PSUThis versatile power supply has been designed for use in general electronic servicing in the laboratory, workshop and classroom. All units can be used in either constant voltage with current limiting or constant current with voltage limiting modes. Features three independent

voltage.

• One 0 to 30V variable output• One 5V 500mA output and one 12V

500mA output• Separate analogue voltmeter and

ammeter• Current limiting LED indicator• Adjustable current control• Overload and short circuit protection• Compact and lightweight• Robust, galvanised steel case• Polycarbonate front panel• • Approved to CE, EN60065, EN55014

Input voltage 230V AC 50HzOutput voltage variable 0 to 30V DCRated output current 2.5AOutput voltage 1 5V DC 500mA (max. 1A)Output voltage 2 12V DC 500mA (max. 1A)Ripple and noise 5mVLoad regulation 0.5% +10mVLine regulation 0.5% +10mVCooling systems Natural convectionDimensions 150 x 145 x 200mmWeight 2.8kg

Type Rating Order code 1+Triple o/p PSU 2.5A 85-1707 72.11

077154

Digital Triple Output Bench DC Power Supplies, HY3000-3 SeriesA range of Rapid Digital Power Supplies that belong to the Triple Output HY3000-3 Series. These power supplies have three independent output channels: two of them provide adjustable output of 0-30V and 0 to 2A, 0 to 3A or 0 to 5A, while the third has of 5V DC 3A.

Both series and parallel connections are possible allowing you to double the voltage or current. The highest output is the sum of twice the voltage value in series mode and the highest output current is the sum of twice the current value in parallel mode.

In the lower part of HY3000-3 front panel there are output terminals and earth

earth connector while the third does not.

The device allows smooth adjustment of both parameters (current and voltage). Each output has a separate potentiometer.

The range is variable voltage, and variable current linear, and suitable for the laboratory, science projects, universities and schools or any other use where a stable voltage up to 30V is required.

• Microprocessor Control DC power supply • Lock-in voltage at your choice• Display type: LED • Input voltage: 104 to 127V AC (60Hz), 207 to 253V AC (50Hz)

oads,

from s the

ee IEC

065048

ply

077155

826

Power Supplies826El

ectr

ical

& P

ower

23

Tel: 01206 751166 Fax: 01206 751188

Pow

er S

uppl

ies

Mftrs. PartOrder codePower ModInput VoltaOutput AvaOutput VolOutput CuOutput AddPower MaxSource EffLoad EffecRipple & NCooling SyDigitsDisplay TypAccuracy (Accuracy (Constant VConstant CProtectionResettableEnvironmeRelative hu

TypeHY3003DHY3005D

DigitHY50A rangePower Sare veryallowingvoltage

is also v

the volteasy to

Applicause, wh

• Input• • Prote• Outpu• Outpu• Accu• • • • • Mode• Displ• Dime• Availa

Mftrs. PartOrder codeRegulated Regulated Input voltaLine regulaLoad regu

Ripple and

ProtectionVoltage indCurrent indRelative hu

TypeHY5002DHY5003D

DigitHY30The RapDigital Power Sstable, DC powcontinuthe outlevels.

The volt

current 0 to 5A

making

General to bothInput voltage: 110 to 220V AC (50 to 60Hz)Power supply: AdjustableSource EffectLoad EffectRipple and noise:AccuracyDimensions 291 x 158 x 136mm

Type Order code 1+HY3003C, 0-30V 0-3A 85-1931 83.78HY3005C, 0-30V 0-5A 85-1932 90.58

554271

Digital Single Output Bench DC Power Supplies, HY1802D SeriesA range of Rapid Single Output Bench DC Power Supplies. These are very stable, regulated output DC power supplies allowing continuous adjustment of both the output voltage and current levels.he Power Supplies have two LCD displays, allowing the output voltages and currents to be displayed simultaneously.

The voltage is variable from 0 to 18V for these models. The current is also variable from 0 to 2A for the HY1802D, and 0 to 3A for the HY1803.

Applications: Excellent for Schools, Universities, laboratory, science projects or any other use, where stable voltage up to 18V is required.

• 2 LCD displays• Constant voltage and constant current• Compact size• • Display accuracy: Voltage: LCD ±1% +2digits Current: LCD ±2% +2digits• Mode: linear• Dimension: 210 x 160 x 95mm• Voltage Adjustable: 0 to 18V DC• • Available models: Rapid HY1802D and HY1803D

Mftrs. Part No. HY1802D HY1803DOrder code 85-1933 85-1934Output Voltage 0 to 18V 0 to 18VOutput Current 0 to 2A 0 to 3AFixed Output No NoType of Display LCD LCD

General for both modelsInput voltage: 104 to 127V AC (60Hz), 207 to 253V AC (50Hz)Line regulation:Load regulation:

Ripple and noise:

Protection: constant current and short-circuit protectionVoltage indication accuracy: LED/LCD ±1% +2digits, analogue display 2.5%Current indication accuracy: LED/LCD ±2% +2digits, analogue display 2.5%Environment: 0C to +40CRelative humidity: <90%

Type Order code 1+ 5+HY1802D, 0-2A 85-1933 51.27 43.06HY1803D, 0-3A 85-1934 53.45 44.90

554307

Digital Single Output Bench DC Power Supplies, HY3003D SeriesA range of Rapid Digital Single Output Bench Power Supplies from the HY3000D Series. These are very stable, regulated output DC power supplies allowing continuous adjustment of both the output voltage and current levels.

The Lab-Grade Power Supplies have two LCD displays, allowing the output voltages and currents to be displayed simultaneously.

The voltage is variable from 0 to 30V for these models. The current is also variable from 0 to 3A for the HY3003D, and 0 to 5A for the HY3005D. The power supplies are equipped with

extremely easy to set the output to your desired level.

Applications: Excellent for Schools, Universities, laboratory, science projects or any other use, where stable voltage up to 30V is required.

• 2 LCD displays• Constant voltage and constant current• Compact size• • Input voltage: 110 to 220V AC/60Hz• Line regulation: CV <= 0.01% + 1 mV, CC <= 0.2% + 1 mA• Load Regulation: CV <= 0.01% + 3mV, CC <= 0.2% + 3 mA• Ripple noise: CV <= 0.5 mV RMS, CC <= 3 mA RMS• Protection: constant current and short-circuit protection• LCD reading accuracy: ±1% for voltage and ±2% for current• Environment: 0°C to +40°C, relative humidity < 90%• Dimensions: 291 x 158 x 136mm• Available models: Rapid HY3003D and HY3005D

Digital Triple Output Bench DC Power Supplies, HY3000M-3 SeriesA range of Rapid Power Supplies that belongs to the Triple Output HY3000M-3 Series. These power supplies have three independent output channels: two of them provide adjustable output of 0-30V and 0 to 3A or 0 to 5A, while the third has a5V DC 3A.

Both series and parallel connections are possible allowing you to double the voltage or current. The highest output is the sum of twice the voltage value in series mode and the highest output current is the sum of twice the current value in parallel mode.

In the lower part of the HY3000M-3 front panel there are output terminals and earth

earth connector while the third does not.

The device allows smooth adjustment of both parameters (current and voltage). Each output has a separate potentiometer.

The ‘M’ version uses Microprocessor Technology to allow the adjustment of the AMPS and VOLTS with ‘TOUCH’ technology instead of dials. The controls are splash and dirt resistant and when set they cannot be changed accidentally. The range is variable voltage, and variable current linear, and suitable for the laboratory, science projects, universities and schools or any other use where a stable voltage up to 30V is required.

• Microprocessor Control DC power supply• Lock-in voltage at your choice• Display type: 4x LED• Input voltage: 104 to 127V AC (60Hz), 207 to 253V AC (50Hz)• Ripple and noise: CV 0.5mVrms• Protection: Reverse polarity protection, current restricted, or short-circuit protection• The dual output can be connected in parallel or series, series voltage or parallel

current is the sum value of dual output• • Dimensions: 365 x 265 x 164mm• Available models: Rapid HY3003M-3 and HY3005M-3

Model HY3003M-3 HY3005C-3Order code 85-1927 85-1928Output Voltage 0 to 30V 0 to 30VOutput Current 0 to 3A 0 to 5AFixed Output Yes, 5V, 3A Yes, 5V, 3AType of Display LCD LCD

General for both typesMains voltage: 110/ 220VAC +/-10%, selectableVoltage display accuracy: LCD: 1.0%+2digitsCurrent display accuracy: LCD: 2.0%+2digits

Line regulation: CC<0.2% +1mASource effect: CV<0.01% +1mVLoad Regulation: CC<0.2% +5mALoad effects: CV<0.01% +5mV

Fixed output <10mVRipple & Noise: CV<0.5mVrms CC<3mArms

Fixed output <10mVFixed output: Accuracy: ±2.5%

Type Order code 1+HY3005M-3, 0-5A 85-1928 193.32

554305

Analogue Single Output Bench DC Power Supplies, HY3000C SeriesA range of Rapid Single Output Bench DC Power Supplies from the HY3003C and HY3005C Series. These are very stable, regulated output DC power supplies allowing continuous adjustment of both the output voltage and current levels.

The Power Supplies have two analogue displays, allowing the output voltages and currents to be displayed simultaneously.

Applications: Excellent for Schools, Universities, laboratory, science projects or any other use, where stable voltage up to 30V is required.

• Display type: 2x Analogue• Linear mode• Input voltage: 110 to 220V AC (50 to 60Hz)• Available with output power of 0 to 3A or 0 to 5A• Supplied with output voltage of 0 to 30V• Available models: HY3003C and HY3005C

Model HY3003C HY3005COrder code 85-1931 85-1932Output Voltage 0 to 30V 0 to 30VOutput Current 0 to 3A 0 to 5AFixed Output No NoType of Display Analogue Analogue

827

Power Supplies 827Electrical &

Pow

er

23

www.rapidonline.com sales@rapidonline.com

Power S

upplies

Applications: Excellent for Schools, Universities, laboratory, science projects or any other use, where stable voltage up to 30V is required.

• Input voltage: 104 to 127V AC (60Hz), 207 to 253V AC (50Hz)• • Protection: current restricted, or short-circuit protection• Output type: Dual output• Output Current: 2x 0 to 5A• Output Voltage: 2x 0 to 30V• Accuracy ±2.5• • • • • Modes of current and voltage stabilisation• Display: LCD• Dimensions: 291 x 158 x 136mm• Manufacturer’s part: Rapid HY3005D

Mftrs. Part No. HY3005DOrder code 85-1939Regulated Output Voltage 2x 0 to 30VRegulated Output Current 2x 0 to 5AInput voltage: 220V/110V AC, 50Hz/60Hz ±2HzLine regulation:Load regulation:

Ripple and noise:

Protection: Current and short-circuit protectionVoltage indication accuracy: LED/LCD±1%+2digits, display 2.5%Current indication accuracy: LED/LCD±2%+2digits, display 2.5%Relative humidity 0°C to +40°C <90%

Type Order code 1+ 5+HY3005D 0-5A 85-1939 189.04 158.79

554416

Digital Triple Output DC Regulated Bench Power Supplies, HY3000F-3 Series

A range of Rapid Triple Output Bench DC Regulated Power Supplies from the HY3003F-3 and HY3005F-3 Series with one . These are very stable, multiple output DC power supplies allowing continuous adjustment of both the output voltage and current levels.

The Power Supplies have four, two colour LED displays, allowing the output voltages and currents to be displayed simultaneously. It has three outputs, with one output being

Both series and parallel connection is possible allowing twice the voltage or current and outputs to be tracked relative to the master output. The highest output voltage is the sum of twice the voltage value in series mode and the highest output current is the sum of twice the current value when in parallel mode.

Applications: Excellent for Schools, Universities, laboratory, science projects or any other use, where stable voltage up to 30V is required.

• Display type: 4 LED with 2 colours• Linear mode• Input voltage: 104 to 127V AC (60Hz), or 207 to 253V AC (50Hz• Dual output can be connected in parallel or series• Available with output power of 2x 0 to 3A or 2x 0 to 5A• Supplied with output voltage of 2x 0 to 30V• Supplied with • Manufacturer’s part: Rapid HY3003F-3 and HY3005F-3

Model HY3003F-3 HY3005F-3Order code 85-1941 85-1942Output Voltage 2x 0 to 30V 2x 0 to 30VOutput Current 2x 0 to 3A 2x 0 to 5AFixed OutputType of Display LED LED

General to bothInput voltage: 104 to 127V AC (60Hz), 207 to 253V AC (50Hz)Power supply: Dual adjustableLine regulation:Load regulation:

Ripple and noise:

Protection: Constant current and short-circuit protectionVoltage indication accuracy: LED/LCD±1% +2digits analogue display 2.5%Current indication accuracy: LED/LCD±2% +2digits analogue display 2.5%

Type Order code 1+HY3003F-3, 0-3A 85-1941 181.17HY3005F-3, 0-5A 85-1942 210.95

554270

Mftrs. Part No. HY3003D HY3005DOrder code 85-1935 85-1936Power Mode Linear LinearInput Voltage 110V AC or 220V AC, 60Hz 110V AC or 220V AC, 60HzOutput Available Single SingleOutput Voltage 0 to 30V DC 0 to 30V DCOutput Current 0 to 3A DC 0 to 5A DCOutput Additional NO NOPower Max 90W 150WSource Effect CV<0.01%+1mV, CC<0.2% + 1mA CV<0.01%+1mV, CC<0.2% + 1mALoad Effect CV <= 0.01% + 3mV, CC <= 0.2% + 3mA CV <= 0.01% + 3mV, CC <= 0.2% + 3mARipple & Noise CV <= 0.5mV RMS, CC <= 3 mA CV <= 0.5mV RMS, CC <= 3mACooling System Fan (built-in) Fan (built-in)Digits 3.5 3.5Display Type 2 LCD 2 LCDAccuracy (V) ±1% ±2digits ±1% ±2digitsAccuracy (A) ±2% ±2digits ±2% ±2digitsConstant Voltage YES YESConstant Current YES YESProtection Short Circuit Short CircuitResettable fuse YES YESEnvironmental 0°C to +40°C 0°C to +40°CRelative humidity: <90% <90%

Type Order code 1+ 5+HY3003D, 0-3A 85-1935 90.72 76.20HY3005D, 0-5A 85-1936 116.72 98.04

554308

Digital Single Output Bench DC Power Supplies, HY5000D SeriesA range of Rapid Digital Single Output Bench Power Supplies from the HY5000D Series. These are very stable, regulated output DC power supplies allowing continuous adjustment of both the output voltage and current levels.

is also variable from 0 to 3A. The power supplies are

the voltage and current outputs, making it extremely easy to set the output to your desired level.

Applications: Excellent for Schools, Universities, laboratory, science projects or any other use, where stable voltage up to 50V is required.

• Input voltage: 110 to 220V AC (50Hz)• • Protection: current restricted, or short-circuit protection• Output type: single output• Output Current: 0 to 3A• Accuracy ±2.5• • • • • Modes of current and voltage stabilisation • Display: LCD• Dimensions: 291 x 158 x 136mm• Available models: Rapid HY5002D and HY5003D S

Mftrs. Part No. HY5002D HY5003DOrder code 85-1937 85-1938Regulated Output Voltage 0 to 50V 0 to 50VRegulated Output Current 0 to 2A 0 to 3AInput voltage: 220V/110V AC 50Hz/60Hz 220V/110V AC 50Hz/60HzLine regulation:Load regulation:

Ripple and noise:

Protection: Current and short-circuit protection Current and short-circuit protectionVoltage indication accuracy: LED/LCD ±1% +2digits, display 2.5% LED/LCD ±1% +2digits, display 2.5%Current indication accuracy: LED/LCD ±2% +2digits, adisplay 2.5% LED/LCD ±2% +2digits, adisplay 2.5%Relative humidity 0°C to +40°C, <90% 0°C to +40°C, <90%

Type Order code 1+ 5+HY5002D 0-2A 85-1937 101.71 85.44HY5003D 0-3A 85-1938 113.71

554309

Digital Dual Output Bench DC Power Supplies, HY3000D SeriesThe Rapid HY3005D is a Digital Dual Output Bench Power Supply. This is a very stable, regulated output DC power supply allowing continuous adjustment of both the output voltage and current levels.

The voltage of the HY3005D

current is also variable from 0 to 5A. The power supply is

making it extremely easy to set the output to your desired level.

554271

554307

d with

ny other

828

Power Supplies828El

ectr

ical

& P

ower

23

Tel: 01206 751166 Fax: 01206 751188

Pow

er S

uppl

ies

DP80PoweThese oDC powRigol hwith anwhich inchanneinput, mswitchinarea anThe supthe folloR&D latesting,test, quinspectcharact

• DP83CH2, CH3,DP831A:3

OVP/OCP10mV~331mV~33V

MultThese Dwith thrisolated

• Consconst

• Trackseries

• 0.01%regul

• Low r• Outpu• Four

displa• Outpu• Fan s• Overl• Supp• GW I

Mftrs. pt. nOrder codeOutput moVoltage

Current

Max. poweTracking seTracking paAC Input

Type3-channe

SMPA rangesuppliecompacfor voltaadjusta

on baseeither 2

• The Poverlo(set aprote

30V 2.5A Regulated Power SupplyThe Rapid PS3025 is a new high quality, fully regulated, power supply capable of supplying up to 30V at a maximum of 2.5 amps with

• Ideally suited to laboratory test and educational environments

• Voltage and current outputs are individually displayed on liquid crystal displays

• Output voltage is continuously adjustable via a single control from 0 to 30V DC

• Output current limiting is fully adjustable up to 2.5A, again by a single control

• The 30V output is terminated with 4mm colour coded terminals

• The 5V and 12V outputs are terminated via a spring loaded colour coded terminal block

• All outputs are overload and short circuit protected• The power supply is housed in a sturdy steel enclosure and is supplied with mains

lead terminated with a UK mains plug fused at 5A and user instructions

Output 1: Voltage 0 to 30V DC continuously variableCurrent 0 to 2.5A continuously variable

Output 2: VoltageCurrent 500mA

Output 3: VoltageCurrent 500mA

Regulation: Line 0.05% ±5mVLoad 0.05% ±5mV

Ripple and noise 0.25mV typicalPower requirement 240V AC 50/60HzWeight 4.5KgDimensions 200 x 150 x 145mm

Type Order code 1+30V 2.5A Reg. PSU 85-1705 84.14

065049

3A Switched Output Switch Mode Power SupplyA compact, switch mode power supply that offers six selectable output voltages (3, 4.5, 6, 7.5, 9, 12V), and is rated at 3A output current.

• The power supply is housed in a tough polycarbonate housing

• from the mains earth)

• Offers excellent performance and reliability at a low-cost

• Overload and short circuit protection

• Ideal for a wide range of applications, and is especially suited for the educational environment

• Output is via 4mm socket/screw terminals• Supplied with two sets of leads - one set with crocodile clips and bare ends the other

with 4mm plugs and 4-way power plug adaptor• CE approved to EN60950, EN55011

Output voltage 3V, 4.5V, 6V, 7.5V, 9V, 12VOutput current 3ARipple & noise 10mV rmsLine regulation 60mVLoad regulation 300mVDimensions 90 x 50 x 140mmCE approval EN60950, EN55011

Type Order code 1+ 5+ 10+ 50+3A Switched o/p PSU 85-1820 33.62 31.07 29.15 27.25

065050

UTD3700E Series DC Power SuppliesThe UNI-T UTD3700E series is a high quality, regulated DC power supply with variable output voltage and current limiting. Suitable for a wide range of applications, from domestic to laboratory and industrial, the UNI-T UTD3700E is one of the

power supplies available.

• Power: 220V ±10%, 50Hz ± 4%

• Product Colour: Red and grey• Product weight: Around 4kg• Product size: 210mm x 152mm x 305mm• Standard Accessories: Test lead, English manual and power cord

Type Order code 1+ 5+ 10+Uni-T 0-32V DC Power Supply 85-4048 172.05 156.69 149.00

400405

Digital Dual Output DC Regulated Bench Power Supplies, HY3000F SeriesA range of Rapid Dual Output Bench DC Regulated Power Supplies from the HY3005F and HY5003F Series. These are very stable, multiple output DC power supplies allowing continuous adjustment of both the output voltage and current levels.

The Power Supplies have two LED displays, allowing the output voltages and currents to be displayed simultaneously.

Applications: Excellent for Schools, Universities, laboratory, science projects and many other uses.

• Display type: LED• Linear mode• Input voltage: 207 to 253V AC (50Hz)• Dual output • Available with output power of 0-5 and 0-3A• Available with output voltages of 0-30V and 0-50V• Both models have 1x 5V 3A Fixed Output• Available models HY3005F and HY5003F

Model HY3005F HY5003FOrder code 85-1943 85-1944Output Voltage 1x 0 to 30V 1x 0 to 50VOutput Current 1x 0 to 5A 1x 0 to 3AFixed Output 1x 5V 3A 1x 5V 3AType of Display LED LED

General to bothInput voltage: 207 to 253V AC (50Hz)Power supply: Dual adjustableLine regulation:Load regulation:

Ripple and noise:

Protection: Constant current and short-circuit protectionVoltage indication accuracy: LED/LCD±1% +2digits analogue display 2.5%Current indication accuracy: LED/LCD±2% +2digits analogue display 2.5%

Type Order code 1+HY3005F, 0-30V 85-1943 118.29HY5003F, 0-50V 85-1944 115.81

554269

Single Output 150W Variable Bench Power SupplyThe Basetech BT-305 is a continuously adjustable

design/build quality that stretch beyond other PSUs in its price bracket.

Both output voltage and current limit can be set independently using the front mounted dials,

has two easy to read LED displays, showing the voltage and current output, even when the PSU’s output is Off.

Automatic switching between constant voltage and

current limiting and output voltage make this power supply unit the perfect entry level model for hobby and model construction.

• Single 0-30V variable output, 0-5A• • Automatic switching between constant current and constant voltage modes• Toggle output On/Off, voltage and current remain displayed • Convenient carrying handle• Weight 5.3kg• Manufacturer’s part: Basetech BT-305Cable supplied.

No. of outputs 1 xWidth 130mmPower 150W

DesktopOutput current 1 0 to 5AInputs IEC 320 C14 panel plugType BT-305Connections 4mm banana jackOutput voltage1 0 to 30V DCType LinearInput voltage 230V ACHeight 155mmWeight 4.95kg

Type Order code 1+Bench power supply 52-1977 98.00

544125

Downloadable datasheetswww.rapidonline.com

829

Power Supplies 829Electrical &

Pow

er

23

www.rapidonline.com sales@rapidonline.com

Power S

upplies

• A thermally controlled, variable speed fan ensures quiet and cool operation• CE approved to EN60950, EN55022, EN61588 (25A version) and EN5011

(40A version)

85-1824 85-182825A 40A

Variable output voltage 3V to 15V DC 3V to 15V DCFixed voltage mode 13.5V DC 13.5V DCRipple and noise 50mV 50mVLoad regulation 200mV 200mVLine regulation 50mV 50mV

>78% >78%Power factor correction >0.95 at optimal load >0.95 at optimal loadV meter range 3x LED 3x LEDA meter range 3x LED 3x LEDDimensions 220 x 110 x 220mm 220 x 110 x 300mmWeight 2.7kg 3.5kg

Type Order code 1+25A SMPS Digital display 85-1824 99.2740A SMPS Digital display 85-1828 125.00

065063

Switch Mode Power Supply 30V/30A

This high power (900W) switch-mode DC regulated power supply features a 1-30V

The constant current limiting protecton allows the output current to remain stable, but the output voltage decreases to a safe operating level. Remote sensing is included to compensate for output line losses, plus the output voltage level can be externally controlled via a remote terminal.

• Includes front terminal with 3A limiting• Main o/p, remote sensing, remote control terminals are mounted on the back of unit• Adjustable o/p 1-30V DC• Lightweight and small footprint - 220 x 110 x 360mm, 5.8kg• Overload, over-temperature, short circuit protection• Constant current mode with LED indicator• Variable speed thermally controlled fan• Large LED readoutsFor a suitable in-line locking DIN socket see Rapid part 50-3220

Variable output voltage 1V to 30V DCTotal rated output current 30A (front + back terminals)Front output max 3ALoad regulation 0.1% +5mVLine regulation 0.05% +3mVRipple and noise 40mV pk-pk

>85%Power factor correction >0.97LED readouts 3-digit display for voltage and currentMeter accuracy 1% + 1 count

Type Order code 1+30V/30A PSU 85-1832 195.00

068072

Plug-in Power Supplies

DC Connector Polarity ChangerThese adaptors have been designed and manufactured by PowerPax to solve an ongoing problem. You have the correct voltage/current AC adaptor, but it’s the wrong polarity. These 2 adaptors will solve that problem.

polarity changer. The centre positive jack to centre negative plug (black colour (Part number C4535 (order code 85-3083)).

The other adaptor is a 2.5 x 5.5 x 12mm polarity changer with a centre positive jack to centre negative plug (grey colour (Part number C4536 (order code 85-3084)).

• Centre positive jack to centre negative plug• Available with 2.1mm (black) or 2.5mm (grey) jack sleeve

Type Order code 1+Black Connector 85-3083 2.34 MOQ 10Type Order code 10+Grey Connector 85-3084 2.34

538677

DP800 Series 1/2/3 Output Variable Bench DC Power SuppliesThese output variable bench DC power supplies from Rigol have been designed with an intuitive user interface which includes an LCD display, channel setting, parameter input, menu softkey, display switching, advanced function area and output terminal. The supplies are ideal for the following applications: R&D lab general purpose testing, automotive electronic test, quality assessment inspection, production testing, bias power for RF/MW circuits, device or circuit characterisation and troubleshooting.

• DP832A/832:3 outputs, CH1CH2, CH3, total power up to 195WDP831A:3 outputs, CH1

OVP/OCP Total power Order code 1+10mV~33V/1mA~3.3A 195W 63-2172 373.361mV~33V/1mA~3.3A 195W 63-2173 666.64

553443

Multi Channel DC PSUsThese DC PSUs are available with three or four independent isolated outputs.

• Constant voltage and constant current modes

• Tracking operation and auto series/parallel operation

• 0.01% load and line regulation

• Low ripple and noise• Output ON/OFF switch• Four 0.5in three-digit LED

displays• Output voltage and current setting when output disabled• Fan speed control circuit minimises fan noise• Overload and reverse polarity protection• Supplied with Instruction manual, power lead and test leads• GW Instek GPS series

Mftrs. pt. no. GPS-3303S GPS-4303SOrder code 85-1825 85-1826Output modeVoltage Channel 1 0-30V 0-30V

Channel 2 0-30V 0-30VChannel 3 5V 2.2-5.2VChannel 4 - 8-15V

Current Channel 1 3A 3AChannel 2 3A 3AChannel 3 3A 1AChannel 4 - 1A

Max. power 195W 200WTracking series voltage 0-60V 0-60VTracking parallel current 0-6A 0-6AAC Input 100/120/220/230V AC 50/60Hz

Type Order code 1+3-channel PSU 85-1825 223.16

074715

SMPS 25A/40AA range of high power switch mode power supplies housed in a lightweight and compact enclosure with digital LED displays for voltage and current readings. Output is adjustable from 3V to 15V with the ability

on base of unit. Models are available with either 25A or 40A outputs.

• The PSUs are fully protected with overload, over temperature, over voltage (set at 16.5V) and short circuit protection as standard

inal

ains

065049

e other

50+27.25

065050

400405

Free Delivery*on all orders over £30 (excl. VAT)

(UK mainland only)

* See Terms & Conditions for full details

830

Power Supplies830El

ectr

ical

& P

ower

23

Tel: 01206 751166 Fax: 01206 751188

Pow

er S

uppl

ies

31W Powe

An innothe uniqsupplieused as

and supapplica

• For u• Supp• Regu• Overv• Appro• PSE a

Input voltaOutput

Ripple maDimension

Output con

Type 31W SMP31W SMP31W SMP

36W MultThis innsupply regulatethat pu

• Outpumista

• OutpuDC in

• SuppAustr

• Standsix co

• CB, C

Input volta

Output vol5V6V7V8V9V10V11V12V13V14V

Output coType AType DType H

Type36W Plug

15W Mini Plugtop Switch Mode PSUA range of high quality plugtop PSUs that offer an output through the moulded female barrel connector.

• 15 Watt continuous• Input voltage of 100-240V AC• 5V, 6V, 9V, 12V, 15V and 24V DC versions available• 2.1 x 5.5 x 12mm female barrel• +ve centre polarity• Short circuit and over voltage protection• CE marked and safety approved

Dimensions (h x d x w) (mm) 64 x 50 x 49.2 including pins (UK)Input voltageOutput barrel (mm) 2.1 x 5.5 x 12Output 85-2900 5V DC 2.5A max.

85-2906 6V DC 3.0A max.85-2901 9V DC 1.6A max.85-2902 12V DC 1.25A max.85-2903 15V DC 1.0A max.85-2904 24V DC 0.65A max.

Voltage protection Short circuit and over voltage protectionWeight 116g approx.Approved CE marked and approved

Voltage Current Order code 1+ 10+ 25+5V DC 2.5A 85-2900 11.04 9.09 8.106V DC 3.0A 85-2906 12.02 9.67 8.889V DC 1.6A 85-2901 10.01 8.25 7.3412V DC 1.25A 85-2902 9.65 7.95 7.0815V DC 1.0A 85-2903 10.05 8.28 7.3724V DC 0.65A 85-2904 9.75 8.03 7.15

071059

Ideal Power 12W Interchangeable Plugtop/Desktop Switch Mode Power SupplyAn innovative range of 12W regulated output switch mode power supplies that feature the unique ability to change from being a plugtop unit to a desktop unit. A series of supplied connector plates (UK, US, Euro and Australian types) enables the unit to be used as a plugtop unit or, use the blank

the most common DC connectors. This unit is ideal for many applications including use in OEM products.

• For use as a desktop or plugtop unit• Supplied with eight of the most common DC output connectors• Regulated output• Overvoltage protection• Approved to international standards and CE marking• PSE and SAA approved for Japan and Australia

Input voltage 90V to 264V AC 50/60HzOutput 5V DC 2.5A (Order code 85-3110)

9V DC 1.2A (Order code 85-3111)12V DC 1A (Order code 85-3112)15V DC 0.8A (Order code 85-3113)24V DC 0.5A (Order code 85-3114)

Ripple max. 1%Dimensions (excl. plug) 77 x 46.5 x 37mm

Output connectors 1.3 x 3.4 x 11mm right angled2.1 x 5.5 x 12mm right angled2.5 x 5.5 x 12mm right angled1.7 x 4 x 9.5mm right angled2.1 x 5.5 x 12mm straight1.7 x 4.7 x 9.5mm straight0.7 x 2.35 x 9.5mm straight3 x 6.3 x 12mm straight

Type Rating Order code 1+ 10+ 25+ 100+12W SMPS 5V 2.5A 85-3110 12.11 10.66 9.86 9.1312W SMPS 9V 1.2A 85-3111 12.11 10.66 9.86 9.1312W SMPS 12V 1A 85-3112 12.11 10.66 9.86 9.1312W SMPS 15V 0.8A 85-3113 12.11 10.66 9.86 9.1312W SMPS 24V 0.5A 85-3114 11.76 10.35 9.57 8.86

081327

Mini Plugtop Switch Mode Power SupplyA range of miniature power supplies that offer switch mode performance and are available in several outputs (see price panel for details).

• Wide input voltage range• Output connector 2.1 x 12mm plug• Short circuit, overvoltage and overcurrent

protection• Long MTBF of 50,000 hours at 25°C, full load• Fitted with 140cm cable• EMI standard CE Class B, Conduction and

Radiation• Safety standards BSMI, CB, CE, GS

Input voltage range 90 to 264V AC 47 to 63Hz63% min.

Load regulation ±5%Leakage current <0.25mAOperating temperature 0°C to +40°C @ 20 to 80% RHStorage temperature –20°C to +60°C @ 10 to 90% RHDimensions 52(L) x 29(W) x 89(H)mmWeight 108g

Output voltage Output current Power Order code3.3V DC 1.5A 4.95W 85-29545.0V DC 1.5A 7.50W 85-29557.5V DC 1.0A 7.50W 85-295612V DC 1.0A 1.20W 85-307012V DC 0.5A 6.00W 85-307115V DC 0.5A 7.50W 85-2959

Voltage Current Order code 1+ 10+ 25+ 100+3.3V 1.5A 85-2954 9.95 8.10 7.205.0V 1.5A 85-2955 9.16 7.46 6.63 6.097.5V 1.0A 85-2956 10.36 8.43 7.5012V 0.5A 85-3071 5.75 5.10 4.46 3.8012V 1.0A 85-3070 6.99 6.29 5.58 4.8815V 0.5A 85-2959 9.09 7.40 6.58

080857

Mini Regulated Voltage Adjustable PSUAn AC/DC Switching adaptor.

• Input: 100 to 240V• Current: 1000mA (max)• Supplied complete with 6 detachable plugs including• A (2.5mm) , B (3.5mm) , E (5.5x2.1mm) , G (5.5x2.5mm) ,

H (3.5x1.35mm) and N (5.5x1.5mm)• Dimensions of casing: 76.5x43x33mm

InputInput voltage 100 to 240V ACInput frequency 50 to 60HzNo load power consumption 0.3WInput full load current 0.25AInput power 16.5W maxOutputLight load output voltage 3.0/4.5/5.0/6.0/7.5/9.0/12.0V DC ±10%Full load output voltage 3.0/4.5/5.0/6.0/7.5/9.0/12.0V DC ±10%Min load output current 0AMax load output current 1.0ANoise test bandwidth 20MHz.Each output bypassed by a 10uFLine regulation 0.5% Input 90 to 264V AC output loaded at full loadSetup, rise, hold uptimeOverall performanceTotal output power 12W

Complied with EUPHi–potInput to output 3000V AC 5mA 50/60HzInput to case 3000V AC 5mA 50/60HzOutput to case 1500V AC 5mA 50/60HzIsolation resistance 100MEnvironmentalOperating temperature 0°C to +25°CStorage temperature –20°C to +50°COperating humidity 20%–85% RH. Non–condensingStorage humidity 10%–90% RH Non–condensing

Dimension 76.5(L)x 42.4(W)x 72.2(H)mmWeight 140g

Type Order code 1+ 10+ 25+Mini regulated PSU 85-1683 7.08 6.50 6.14

401000

Page 119

831

Power Supplies 831Electrical &

Pow

er

23

www.rapidonline.com sales@rapidonline.com

Power S

upplies

5V DC 1A USB UK PinsThis 5V DC 1A USB power supply has a 90-264V AC input for world use. It carries full international safety approvals and meet the latest ErP stage 2 requirements with high reliability (M.T.B.F of 50K hours at 25 degrees C.) The SW4492-V2 power supply can be used to charge a wide range of products. These PSUs are available in black or white.

• Output: 5V DC 1A• Power (Watts): 5W• DC Plug: USB socket• Rated input voltage: 90 to 264V AC

Mftrs. Part Voltage Amps Watts Order codeSW4492-V 5V DC 1A 5W 85-2893

Case colour Order code 1+ 10+ 25+Black 85-2893 3.67 3.33 3.21White 85-2894 3.77 3.45 3.34

526289

5V DC 2.1A USB with UK PinsThis 5V DC 2.1A USB power supply has a 90-264V AC input for world use. It carries full international safety approvals and meet the latest ErP stage 2 requirements with high reliability (M.T.B.F of 50K hours at 25 degrees C.) The SW4479 power supply can be used to charge a wide range of products.

• Part Number: SW4479• Output: 5V DC 2.1A• Power (Watts): 10.5W• DC Plug: USB socket• Rated Input Voltage: 100 to 240V AC

Mftrs. Part Voltage Amps Watts Order codeSW4479 5V DC 2.1A 10.5W 85-2892

Type Order code 1+ 10+ 25+V DC 2.1A USB PSU 85-2892 6.21 5.64 5.47

526288

5V DC 1A UK with Micro USB Output LeadThis 5V DC 1A USB power supply comes complete with a Micro USB output lead and a set of AC interchangeable AC pins. The PSU has a 90-264V AC input for world use. It carries full international safety approvals and meet the latest ErP stage 2 requirements with high reliability (M.T.B.F of 50K hours at 25 degrees C.) The SW4149-B power supply can be used to charge a wide range of products.

• Part Number: SW4450-B• Output: 5V DC• Current Min.: 0.01A• Power (Watts): 5W• USB ouput lead• Rated Input Voltage: 100 to 240V AC

Mftrs. Part Voltage Amps Watts Order codeSW4450B 5V DC 1000mA 5W 85-2890

Type Order code 1+ 10+5V DC 1A USB PSU 85-2890 4.33 3.93

526286

Stontronics Level VI UK Plugtop Switched Mode Power Supply Units SMPSUA range of 12V DC, switched mode plugtop power supplies from Stontronics. The power supplies have standard UK 13A plug pins and a standard 5.5 x 2.1mm centre positive output connector.

• 12V DC plugtop power supplies• Small & compact design• • Short-circuit, over-current and over-voltage protection• Turn-on delay• 1 year manufacturer’s warranty• Stontronics T6 series

Voltage Max. current Order code 1+ 10+ 25+12V DC 500mA 85-3006 5.55 4.35 3.9012V DC 1.5A 85-3744 5.85 5.57 5.4112V DC 2.0A 90-2766 7.63 6.63 5.84

564071

31W Interchangeable Plugtop/Desktop Switch Mode Power Supply

An innovative range of 31W regulated output switch mode power supplies that feature the unique ability to change from being a plugtop unit to a desktop unit. A series of supplied connector plates (UK, US, Euro and Australian types) enables the unit to be used as a plugtop unit or, use the blank plate and the IEC inlet to utilise the unit as a

and supplied with eight of the most common DC connectors. This unit is ideal for many applications including use in OEM products.

• For use as a desktop or plugtop unit• Supplied with eight of the most common DC output connectors• Regulated output• Overvoltage protection• Approved to international standards and CE marking• PSE and SAA approved for Japan and Australia

Input voltage 90V to 264V AC 50/60HzOutput 5V DC 4A (Order code 85-3120)

9V DC 2.66A (Order code 85-3121)12V DC 2.5A (Order code 85-3122)15V DC 2A (Order code 85-3123)24V DC 1.25A (Order code 85-3124)

Ripple max. 1%Dimensions (excl. plug) 101 x 52 x 36mm (5V model)

89 x 56 x 41mm (12V, 15V and 24V models)Output connectors 1.3 x 3.4 x 11mm right angled

2.1 x 5.5 x 12mm right angled2.5 x 5.5 x 12mm right angled1.7 x 4 x 9.5mm right angled2.1 x 5.5 x 12mm straight1.7 x 4.7 x 9.5mm straight0.7 x 2.35 x 9.5mm straight3 x 6.3 x 12mm straight

Type Rating Order code 1+ 10+ 25+31W SMPS 12V 2.5A 85-3122 14.37 12.54 11.5731W SMPS 15V 2A 85-3123 14.37 12.54 11.5731W SMPS 24V 1.25A 85-3124 14.37 12.54 11.57

081329

36W Voltage Adjustable Multi-Output Plugtop PSUThis innovative plugtop switch mode power supply will supply any one of twenty fully regulated voltages by means of a resistor that pushes into the side of the unit.

• Output voltage cannot be changed by mistake

• Output voltage between 5V DC and 24V DC in 1V increments

• Supplied with UK, European, USA and Australian push-on input pins

• Standard output connector pack includes six connector types

• CB, CE, GS approved

Input voltage 100 to 240V AC 50/60Hz

Output voltage Output current Output voltage Output current5V 3.8A 15V 2.4A6V 3.7A 16V 2.2A7V 3.6A 17V 2.1A8V 3.5A 18V 2.0A9V 3.4A 19V 1.88A10V 3.3A 20V 1.8A11V 3.2A 21V 1.7A12V 3.0A 22V 1.63A13V 2.7A 23V 1.56A14V 2.5A 24V 1.5A

Output connectorsType A 2.5mm male Type B 3.5mm maleType D 2.1 x 5.5 x 12mm female Type G 2.5 x 5.5 x 12mm femaleType H 1.3 x 3.5 x 10mm female Type N 1.5 x 5.5 x 12mm female

Type Order code 1+ 10+ 25+36W Plugtop PSU 85-2908 19.46 18.20 16.83

076992

071059

p

ng use

100+9.139.139.139.138.86

081327

832

Power Supplies832El

ectr

ical

& P

ower

23

Tel: 01206 751166 Fax: 01206 751188

Pow

er S

uppl

ies

Output

DimensionInput voltaCable inletOutput baVoltage proOperating Storage teNo load stWeightApproved

Type12V DC 515V DC 418V DC 324V DC 2

90W High quthat feainlet an5.5 x 1conneca rangemonitordevices

• Wide• Maxim• Availa• LED i• Short• No lo• Requ• • Please n6500) Fo

Input voltaOutput

Load reguLeakage cMTBFOperating Storage teDimensionWeight

Type 90W PSU

120WHigh quthat feaand a 15.5 x 1conneca rangemonitorperiphe

• Wide• Maxim• Availa• AC ac• Low c• • • No in• Short•

Input voltaOutput

Operating DimensionWeight

Type 120W PS120W PS

12-25W Mini Desktop Switch Mode PSUA range of high quality switch mode PSUs that have 2-pin IEC input connectors.

• Wide range input voltage 90 to 255V AC at 47 to 63Hz

• Short circuit, over voltage and over current protection

• • Fully regulated output• Connector, 2.1 x 5.5 x 12mm female

barrel• Dimensions 75 x 47.5 x 26.5mm• IEC, TUV, UL approved

Type Order code 1+ 10+24V DC 0.55A 85-3946 12.96 10.61

074995

PowerPax UK 25-30W DC Miniature Desktop Switch Mode PSUThese high quality desktop PSUs each offer

IEC320-C8 inlet (cable not supplied) order code 23-7497.

• 2.1 x 5.5 x 12mm female barrel• Please note: A 2.5 x 5.5 x 12mm output

part (Order code 85-3073)•

• No minimum load• 25W max.• 5V, 12V, 15V and 24V DC versions available• +ve centre polarity• Short circuit and over voltage protection• Meets radiated and conducted emission requirements of CISPR22 Class B and FCC

Class B• CE, UL, cUL, TUV, CB and BSMI approved

Current Dimensions Order codeOutput 5V DC 5A 90(L) x 55(W) x 35(D)mm 85-2950

12V DC 2.5A 101(L) x 51(W) x 34(D)mm 85-307312V DC 3.8A 95(L) x 43(W) x 28(D)mm 85-295115V DC 3A 95(L) x 43(W) x 28(D)mm 85-295224V DC 2.5A 120(L) x 58(W) x 37(D)mm 85-2953

Voltage protection Short circuit and over chargeInput voltageCable inlet IEC320-C8 (2P)Output barrel 2.1 x 5.5 x 12mmOperating temperature 0°C to +40°CStorage temperature –40°C to +85°CWeight 193g approx.Approved CE, UL, cUL, TUV, CB and BSMI approved

Type Order code 1+ 10+ 25+5V DC 5A 85-2950 18.65 16.58 14.5112V DC 2.5A 85-3073 12.01 10.33 9.1912V DC 3.5A 85-2951 15.67 14.27 12.8815V DC 2.6A 85-2952 19.43 15.53 14.1424V DC 2.5A 85-2953 24.43 19.54 17.79

071065

60W to 65W Desktop Switch Mode Power Supply (2-pin Output)These high quality desktop switch mode

IEC320-C8 inlet,

supplied) order code 23-7497.

• 1.5A

• 65W max• 5V, 12V, 15V and 24V DC versions

available• 2.1 x 5.5 x 12mm female barrel• +ve centre polarity• Short circuit, over voltage and over

current protection• 4 versions available• Meet FCC Class B and CISPR22 Class B• CE, UL, cUL, TUV, CB and BSMI approved

Desktop Power Supply Units

60W to 65W Desktop Switch Mode Power Supply (3-pin IEC input)A range of high quality, ultra compact 65W desktop switch mode power supplies with full international safety approvals including CB, UL, cUL, BSMI, PSE, GS, RCM, CE and LPS. These switch mode power supplies meet Energy

and have a wide range 90-264V AC 47/63Hz input for world use. They also come with short circuit, over voltage and over load current protection as standard.

• Input 90V to 264V AC 47/63Hz• Output 12V DC to 24V DC• Dimensions: 115 x 53 x 38mm•

Output power Input Output Output Order code60W 90 to 264V AC 12V DC 5.0A 85-308065W 90 to 264V AC 24V DC 2.7A 85-3081

Type Order code 1+12V DC 5A PSU 85-3080 12.4124V DC 2.7A Desktop PSU 85-3081 12.41

400397

Switch Mode PSU 12W-25WThis range of desktop switch mode PSUs made to high standard offer a regulated single

via a IEC320-C8 inlet, (cable not supplied) order code 23-7497.

• • 25W max.• 5V, 9V, 12V, 15V and 24V DC versions

available• 2.1 x 5.5 x 12mm female barrel• +ve centre polarity• Low ripple and noise• EMI: Meets FCC class B• Short circuit and over voltage protection• 7 versions available• The input voltage is via a IEC320-C8 inlet, (cable not supplied) order code 23-7497.• CE, UL, cUL, TUV, CB and BSMI approved

Mftrs. Part No. Output Current Dimensions Order codeSW3110 5V DC 2.5A 68.2 (H) x 49.8 (W) x 26.3mm (D) 85-2940SW3111 9V DC 1.6A 68.2 (H) x 49.8 (W) x 26.3mm (D) 85-2941SW3113 12V DC 1.25A 68.2 (H) x 49.8 (W) x 26.3mm (D) 85-2943SW3114 12V DC 2A 94 (H) x 43.5 (W) x 31mm (D) 85-2944SW3115 15V DC 1A 68.2 (H) x 49.8 (W) x 26.3mm (D) 85-2945SW3116 24V DC 0.65A 68.2 (H) x 49.8 (W) x 26.3mm (D) 85-2946

Input voltageCable inlet IEC320-C8 (2P)Output barrel 2.1 x 5.5 x 12mmVoltage protection Short circuit and over voltageOperating temperature 0°C to +40°CStorage temperature –40°C to +85°CWeight 109g approx.Approved CE, UL, cUL, TUV, CB, BSMI

Type Order code 1+ 10+ 25+5V DC 2.5A 85-2940 11.66 9.33 8.559V DC 1.5A 85-2941 11.96 9.57 8.7712V DC 1.2A 85-2943 11.65 9.32 8.5312V DC 2A 85-2944 16.16 12.92 11.8315V DC 1A 85-2945 10.90 8.89 8.2824V DC 0.55A 85-2946 11.83 9.47 8.67

071064

Downloadable datasheetswww.rapidonline.com

Page 746

Cordsets

833

Power Supplies 833Electrical &

Pow

er

23

www.rapidonline.com sales@rapidonline.com

Power S

upplies

DC/DC & AC/DC Converters

AC-DC Power Supplies with 3W Single OutputThese AC-DC 4-Pin Power Supplies with 3W Single Output from Vigortronix are transformers manufactured for use in applications where space is limited, thanks to their encapsulated design of the module which feature a ‘built-in’ transformer.

Weighing just 30g, these PCB modules are not only cost-effective, but also boast some excellent features, such as the Pri/Sec full isolation, low standby power (<0.15W), -25°C to +70°C operating temperature (full load) and low ripple & noise, while offering over power, over voltage and short circuit protection.

• Orange colour• 2 input pins and 2 output pins• 90-264V AC/47-63Hz (120V DC-370V DC) input voltage range• 3.3V-48V DC output range• 3600Vrms dielectric strength• UL94-V0 material• EN61558, EN60950, CE, UL safety• Output voltage Order code 1+ 5+ 25+ 100+3.3V 84-2173 4.64 4.39 4.25 3.665V 84-2174 4.64 4.39 4.25 3.666V 84-2175 4.64 4.39 4.25 3.667.5V 84-2176 4.64 4.39 4.25 3.669V 84-2177 4.64 4.39 4.25 3.6612V 84-2178 4.64 4.39 4.25 3.6615V 84-2179 4.64 4.39 4.25 3.6618V 84-2180 4.64 4.39 4.25 3.6624V 84-2181 4.64 4.39 4.25 3.6648V 84-2159 5.09 4.83 4.67 4.18

533024

VTX-214-PCB1 Universal AC-DC Converter Mounting KitThe Vigortronix VTX-214-PCB1 is a Universal AC-DC Converter Mounting Kit and a key component in the design of nearly all mains powered electrical and electronic equipment. This Vigortronix mounting kit provides a convenient ‘Plug and Play’ solution with a prefabricated PCB with screw terminal connections and through holes for mounting with

mains fuse and an LED for Output Status.

• Universal AC-DC Converter PCB• Ideal for Testing and Prototyping purposes• Suitable for 1W - 10Watt Converters• Optional: Additional Filter Components• Insulated Terminal Blocks• Fitted with Mains Fuse• LED for Output status• Wall / Enclosure mountable• Manufacturer’s part: Vigortronix VTX-214-PCB1

Type Order code 1+ 5+ 25+ 100+AC-DC Converter PCB 84-2157 5.73 5.50 5.12 4.78

552037

Current Order codeOutput 12V DC 5A 85-2931

15V DC 4.2A 85-293224V DC 2.5A 85-2953

Dimensions 115 (L) x 53 (W) x 37mm (D)Input voltageCable inlet IEC320-C8 (2P)Output barrel 2.1 x 5.5 x 12mmVoltage protection Short circuit, over voltage and over current protectionOperating temperature 0°C to 40°CStorage temperature –40°C to +85°CNo load standby power 0.25-0.75W maxWeight 261g approxApproved CE, UL, cUL, TUV, CB and BSMI approved

Type Order code 1+ 10+ 25+12V DC 5A 85-2931 26.44 20.85 19.0015V DC 4.2A 85-2932 25.28 20.23 18.5318V DC 3.6A desktop PSU 85-3074 21.51 19.57 17.6124V DC 2.5A 85-2953 24.43 19.54 17.79

071063

90W Desktop Switch Mode PSUHigh quality desktop switch mode PSUs that feature an IEC320 C6 ‘cloverleaf’ inlet and a captive lead with a 2.1 x 5.5 x 12mm female, centre positive DC connector. These PSUs are suitable for a range of applications including LCD monitors, notebooks, printers and portable devices.

• Wide input voltage range 90V to 264V• Maximum power 90W• Available in 12V and 24V versions• LED indication• Short circuit, over voltage and over current protection• No load power consumption 0.5W• Requires a C5 socket to 13A plug cord 2m lead (order code 23-6500) not supplied• CE/FCC Class B• BSMI, CB, GS, PSE, UL, cULPlease note that a C5 socket to 13A plug cord 2m lead is required for this product (order code 23-6500) For suitable mains lead see Connectors – mains/power section

Input voltage 90V to 264V 47Hz to 63HzOutput 85-2982 +24V 3.75A 90W

80% typ.Load regulation ±5%Leakage current <3.5mAMTBF 50,000 hours min. @ +25°C full loadOperating temperature 0°C to +40°C @20 to 80% RHStorage temperature –20°C to +60°C @10 to 90% RHDimensions 138 x 61 x 36mmWeight 415g

Type Voltage Order code 1+ 10+90W PSU 24V DC 85-2982 30.47 27.73

079713

120W Desktop Switch Mode PSUHigh quality desktop switch mode PSUs that feature a standard IEC320 C14 inlet and a 1.2m captive lead with a 2.1 x 5.5 x 12mm female, centre positive DC connector. These PSUs are suitable for a range of applications including LCD monitors, notebooks, printers and other peripheral and portable devices.

• Wide input voltage range 90V to 264V• Maximum power 120W• Available in 12V and 24V versions• AC active PFC input design• Low cost and low weight• • • No inrush current damage at cold start• Short circuit, over voltage and over current protection• BSMI, CB, CCC, CE, EK, PSE, TUV, cUL

Input voltage 90V to 264V 50Hz to 60HzOutput 85-2983 +12V 10A 120W

85-2984 +24V 5A 120WOperating temperature +10°C to +40°CDimensions 150 x 65 x 38mmWeight 514g

Type Voltage Order code 1+ 10+120W PSU 12V DC 85-2983 47.47120W PSU 24V DC 85-2984 43.72 38.26

079714

074995

h

d FCC

de

071065

…where price meets quality

www.rapidonline.com

DC to 230V AC Inverters

834

Power Supplies834El

ectr

ical

& P

ower

23

Tel: 01206 751166 Fax: 01206 751188

Pow

er S

uppl

ies

1W Dual Output DC to DC Converters - RA/RB SeriesA range of 1W dual output DC to DC converters in industry standard SIL or DIL packages. Competitively priced this range features:

• Dual output from a single input rail• Industry standard pinout• • Power sharing on output• UL 94V-0 package material

Order code Input Output Output Load (max.)SIL Package84-2270 5V ±5V ±100mA 70 to 78% 470μF84-2272 5V ±12V ±42mA 78 to 82% 220μF84-2274 5V ±15V ±33mA 80 to 84% 220μF84-2276 12V ±5V ±100mA 70 to 78% 470μF84-2278 12V ±12V ±42mA 78 to 82% 220μF84-2280 12V ±15V ±33mA 80 to 84% 220μF84-0010 24V ±5V ±100mA 70 to 78% 470μF84-2284 24V ±12V ±42mA 78 to 82% 220μF84-2286 24V ±15V ±33mA 80 to 84% 220μFDIL Package84-2296 12V ±5V ±100mA 70 to 78% 470μF84-0008 24V ±12V ±42mA 78 to 82% 220μF

Input voltage Output voltage Order code 1+ 5+ 10+SIL package5V 5V 84-2270 4.78 4.58 4.265V 12V 84-2272 4.78 4.58 4.265V 15V 84-2274 4.78 4.58 4.2612V 5V 84-2276 4.83 4.6212V 12V 84-2278 4.78 4.58 4.2612V 15V 84-2280 4.78 4.58 4.2624V 12V 84-2284 5.36 4.88 4.67DIL package12V 5V 84-2296 2.60 MOQ 25Input voltage Output voltage Order code 25+SIL package24V 5V 84-0010 6.3624V 15V 84-2286 4.67DIL package24V 12V 84-0008 6.69

036108

SIP3 Single Output DC/DC Converter R-78(H/B)xx(L) SeriesA range of Recom DC to DC Single Output converters from the R-78xx-1.0 and R-78HBxx series. These switching regulators are ideally suited to replace 1A 78xx linear regulators and are pin compatible. The convertors have a high voltage input range, and an

as heat, so there is no need for any heat sinks with their additional space.

regulators where component height is at a premium. The low ripple

Typical applications include telecommunication, automotive, industrial, aerospace and battery powered applications.

• • Pin-out compatible with LM78xx Linear Regulators• Wide input range (4.75V to 18V)• Short circuit protection, thermal shutdown• Non standard outputs available as specials• Low ripple and noise• No heatsink required• • Available in the R-78xx-1.0 and R-78HBxx series• Available with Straight or 90° pins (L version)

Mftrs. Part Input (V) Output (V) Output (A) Order codeR-785.0-0.5 6.5-34 5.0 0.5 94% 84-2554R-7812-0.5 15-34 12 0.5 97% 84-2557R-785.0-1.0 6.5-18 5.0 1.0 94% 84-2573R-7815-0.5 18-34 15 0.5 97% 84-2558R-7815-0.5 18-34 3.3 0.5 91% 84-2553R-783.3-1.0 4.75-18 3.3 1.0 90% 84-2572R-782.5-1.0 4.75-18 1.8 1.0 82% 49-6939R-78B3.3-1.5 4.75-18 3.3 1.5 91% 49-6968R-78B3.3-1.0 4.75-34 3.3 1.0 89% 49-6965R-78B5.0-1.5 6.5-18 5.0 1.5 94% 49-6969R-78B5.0-1.0 6.5-34 5.0 1.0 93% 49-6966R-785.0-05 6.5-32 5.0 0.5 94% 49-6940R-78B6.5-1.0 9.0-32 6.5 1.0 94% 49-6949R-78HB6.5-0.5 9-72 6.5 0.5 91% 49-6957R-78HB3.3-0.5 9-72 3.3 0.5 82% 49-6970R-78HB5.0-0.5 9-72 5.0 0.5 87% 49-6971R-78B9.0-1.0 12-32 9.0 1.0 93% 49-6950R-78HB9.0-0.5 14-72 9.0 0.5 92% 49-6958R-78B12-1.0 16-34 12 1.0 96% 49-6967R-78HB12-0.5 17-72 12 0.5 94% 49-6972R-78B15-1.0 20-32 15 1.0 97% 49-6943R-78HB15-0.5 20-72 15 0.5 95% 49-6952R-78HB24-0.3 36-72 24 0.3 96% 49-6954R-78B3.3-1.5L 4.75-18 3.3 1.5 91% 49-6946R-78B3.3-1.0 4.75-34 3.3 1A 89% 49-6945R-78B5.0-1.5l 6.5-18 5.0 1.5 94% 49-6948lR-78B5.0-1.0L 6.5-34 5.0 1.0 93% 49-6947R-78HB5.0-0.5L 9-72 5.0 0.5 87% 49-6956R-78B9.0-1.0L 12-32 9.0 1.0 95% 49-6951R-78B12-1.0L 16-32 12 1.0 96% 49-6942R-78B15-1.0L 20-32 15 1.0 97% 49-6944R-78HB15-0.5L 20-72 15 0.5 95% 49-6953R-78HB24-0.3L 36-72 24 0.3 96% 49-6955

Type Order code 1+ 5+ 10+R-785.0-0.5 84-2554 5.88 5.61 5.30R-7812-0.5 84-2557 6.50 6.14 5.11R-785.0-1.0 84-2573 6.56 6.20 5.16R-7815-0.5 84-2558 5.93 5.66 5.36R-783.3-0.5 84-2553 5.93 5.66 5.36R-783.3-1.0 84-2572 5.93 5.66 5.36R-782.5-1.0 49-6939 5.93 5.66 5.36R-78B3.3-1.5 49-6968 9.56 9.03 8.51R-78B3.3-1.0 49-6965 7.88 7.46R-78B5.0-1.5 49-6969 9.46 8.94R-78B5.0-1.0 49-6966 7.88 7.46 7.04R-786.5-0.5 49-6940 5.93 5.66 5.36R-78B6.5-1.0 49-6949 8.51 8.09R-78HB6.5-0.5 49-6957 12.08 11.45 10.92R-78HB3.3-0.5 49-6970 11.45 10.82R-78HB5.0-0.5 49-6971 11.45 10.82R-78B9.0-1.0 49-6950 8.51 8.09 7.67R-78HB9.0-0.5 49-6958 11.45 10.82 10.29R-78B12-1.0 49-6967 8.10 7.70 7.30R-78HB12-0.5 49-6972 12.08 11.45 10.92R-78B15-1.0 49-6943 8.51 8.09 7.67R-78HB15-0.5 49-6952 12.08 11.45 10.92R-78HB24-0.3 49-6954 13.13 12.50 11.76R-78B3.3-1.5L 49-6946 9.98 9.35 8.93R-78B3.3-1.0L 49-6945 8.30 7.88 7.46R-78B5.0-1.5L 49-6948 9.98 9.35 8.93R-78B5.0-1.0L 49-6947 8.30 7.88 7.46R-78HB5.0-0.5L 49-6956 11.87 11.34R-78B9.0-1.0L 49-6951 9.03 8.51 8.09R-78B12-1.0L 49-6942 9.03 8.51 8.09R-78B15-1.0L 49-6944 9.03 8.51 8.09R-78HB15-0.5L 49-6953 12.18 11.45 10.40R-78HB24-0.3L 49-6955 13.55 12.92

532796

Scheduled ordersRapid will store your order FREE OF CHARGE and then

deliver the required amount along with an individual invoice on your specified dates.

Email your scheduled order and

required dates to:

education@rapidonline.com