Upload
truongtruc
View
326
Download
2
Embed Size (px)
Citation preview
DRILL COLLARS 3-1/8” OD Slick Drill Collar complete with 2-7/8” HT PAC Connections3-1/8” OD Slick Drill Collar complete with 2-7/8” WT 23 Connections3-3/8” OD Slick Drill Collar complete with 2-7/8” WT 26 Connections4-1/8” OD Slick Drill Collar complete with 2-7/8” NC 31 Connections 4-3/4” OD Spiral Drill Collar complete with 3-1/2” NC 38 Connections4-3/4” OD Spiral Drill Collar complete with 3-1/2” WT 38 Connections4-3/4” OD Spiral Drill Collar complete with 3-1/2” PH 6 Connections6-1/2” OD Spiral Drill Collar complete with 4-1/2” NC 50 Connections (Interdril)6-1/2” OD Spiral Drill Collar complete with 4-1/2” NC 50 Connections (VAM)8” OD Spiral Drill Collar complete with 6-5/8” REG Connections (Interdril)8” OD Spiral Drill Collar complete with 6-5/8” REG Connections (Shuguang)8” OD Spiral Drill Collar complete with 6-5/8” REG Connections (SubDrill)9-1/2” OD Spiral Drill Collar complete with 7-5/8” REG Connections DRILL PIPE – Grade S-135 2-7/8” 10.4# Grant Prideco HT PAC Drill Pipe – 3-1/8” OD x 2-7/8” OD x 1-1/2” ID2-7/8” 10.4# TenarisHydril WT23 Drill Pipe – 3-1/8” OD x 2-7/8” OD x 1-1/2” ID 2-7/8” 10.4# TenarisHydril WT23 Drill Pipe – 3-1/8” OD x 2-7/8” OD x 1-1/2” ID (Hard Banded)2-7/8” 10.4# TenarisHydril WT26 Drill Pipe – 3-3/8” OD x 2-7/8” OD x 1-3/4” ID3-1/2” 15.5# TenarisNKK NC38 DSTJ Drill Pipe – 5” OD x 3-1/2” OD x 2-9/16” ID4” 14.0# Grant Prideco XT39 Drill Pipe – 4-7/8” OD x 4” OD x 2-11/16” ID4” 14.0# Grant Prideco TT390 Drill Pipe – 5” OD x 4” OD x 2-9/16” ID5” 19.5# TenarisNKK NC50 DSTJ Drill Pipe – 6-5/8” OD x 5” OD x 3-1/4” ID5” 19.5# Grant Prideco GPDS50 Drill Pipe – 6-5/8” OD x 5” OD x 3-1/4” ID5-1/2” 21.9# NKK 5-1/2” FH DSTJ Drill Pipe – 7” OD x 5-1/2” OD x 3-1/2” ID5-7/8” 23.4# Grant Prideco XT57 Drill Pipe – 7” OD x 5-1/8” OD x 4-1/4” ID HEVIWATE DRILLPIPE 3-1/2” 19.2# NKK NC38 DSTJ Integral HWDP – 5” OD x 3-1/2” OD x 2-9/16” ID (Interdril)3-1/2” 19.2# NKK NC38 HWDP – 5” OD x 3-1/2” OD x 2-9/16” ID 4” 24.3# Grant Prideco XT39 HWDP – 4-7/8” OD x 4” OD x 2-11/16” ID4” 24.3# Grant Prideco TT390 Tri-Spiral HWDP – 5” OD x 4” OD x 2-9/16” ID5” 50.4# NKK NC50 Integral HWDP – 6-5/8” OD x 5” OD x 3” ID (Interdril)5” 50.4# NKK NC50 HWDP – 6-5/8” OD x 5” OD x 3” ID (OMSCO)5” 50.4# NKK NC50 HWDP – 6-5/8” OD x 5” OD x 3” ID (SMFi)5” 49.0# NKK NC50 DSTJ Integral HWDP – 6-5/8” OD x 5” OD x 3-1/4” ID (Interdril)5-1/2” 54.6# NKK 5-1/2” FH DSTJ HWDP – 7” OD x 5-1/2” OD x 3-1/2” ID5-7/8” 55.1# Grant Prideco XT57 HWDP – 7” OD x 5-1/8” OD x 4-1/4” ID
Page
1234
5678910111213
1415161718192021222324
25262728293031323334
MAIN MENU
TUBING 1.315” 1.80# TPS TS-8 Upset Tubing Grade L-801.660” 3.02# Hyd CS Upset Tubing Grade L-801.90” 3.64# TPS TS-8 Upset Tubing Grade L-802-7/8” 8.70# TSH533 Upset Tubing Grade P-1103-1/2” 12.95# TPS TS-6 Upset Tubing Grade L-803-1/2” 15.8# Hyd PH-6 Upset Tubing Grade T-953-1/2” 15.8# TSH533 Upset Tubing Grade L-803-1/2” 15.8# TSH533 Upset Tubing Grade T-953-1/2” 15.8# TPS TS-6 Upset Tubing Grade C95SS4-1/2” 15.5# TSH533 Upset Tubing Grade L-804-1/2” 15.8# TPS TS-6 Upset Tubing Grade L-804-1/2” 15.8# TPS TS-6 Upset Tubing Grade C95SS4-1/2” 15.5# Hyd PH-4 Upset Tubing Grade C-95 2-3/8” 4.60# TSH511 Flush Joint Tubing Grade L-802-3/8” 4.60# TSH511 Flush Joint Tubing Grade P1102-7/8” 6.40# TSH511 Flush Joint Tubing Grade L-802-7/8” 6.40# TSH511 Flush Joint Tubing Grade P1103-1/2” 9.20# TSH511 Flush Joint Tubing Grade L-803-1/2” 9.20# TSH511 Flush Joint Tubing Grade P1104” 9.50# TSH511 Flush Joint Tubing Grade L-804” 9.50# TSH511 Flush Joint Tubing Grade P1104” 11.6# TSH511 Flush Joint Tubing Grade P1105” 18.0# TSH511 Flush Joint Tubing Grade L-80 5” 18.0# TSH521 Semi Flush Tubing Grade Q125
Page
35363738394041424344454647
48495051525354555657
58
MAIN MENU
7 – 1/16” Blow out Preventors
1) 4-3/4” OD NC38 NMDC Drill Collar2) 6-3/4” OD NC50 NMDC Drill Collar3) 8” OD 6-5/8” REG NMDC Drill Collar4) 8-1/4” OD 6-5/8” REG NMDC Drill Collar5) 9-1/2” OD 7-5/8” REG NMDC Drill Collar 3.000” ID6) 9-1/2” OD 7-5/8” REG NMDC Drill Collar 3.031” ID7) 9-1/2” OD 7-5/8” REG NMDC Drill Collar 4.000” ID
8) 6-3/4” OD NC50 NMDC Spiral Drill Collar9) 8-1/4” OD 6-5/8” REG NMDC Spiral Drill Collar10) 9-1/2” OD 7-5/8” REG NMDC Spiral Drill Collar
11) 4-3/4” OD NC38 NMCSDP Flexi Collar12) 6-1/2” OD NC50 NMCSDP Flexi Collar13) 6-3/4” OD NC50 NMCSDP Flexi Collar14) 8” OD 6-5/8” REG NMCSDP Flexi Collar15) 8-1/4” OD 6-5/8” REG NMCSDP Flexi Collar
Page
59606162636465
666768
6970717273
NON MAGNETIC TUBULARS
16) Koomey Control Unit
17) HT 14:200 Torque Unit
74
75
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
IMSF48 Rev1 1st July 2012
SLICK DRILL COLLAR SPECIFICATION SHEET 2.875” X 20.046 lbs/ft GRANT PRIDECO HT PAC RANGE 2
NOV Grant Prideco
Slick Drill Collar
Original Equipment Manufacturer
NOV Grant Prideco USA
Country of Origin
USA
Nominal OD 3 1/8” (3.125”)
Nominal ID 1.500”
Steel Grade 110 Ksi Minimum Yield
Nominal Weight
20#
Nominal Wall Thickness
0.813” Drift Size 1.375”
Drill Collar Capacities Cross Sectional Area Body (𝒊𝒏𝟐)
5.903 Section Modulus (𝒊𝒏𝟑)
2.837
Cross Sectional Area OD (𝒊𝒏𝟐)
7.670 Polar Section Modulus (𝒊𝒏𝟑)
5.674
Cross Sectional Area ID (𝒊𝒏𝟐)
1.767 Moment of Inertia (𝒊𝒏𝟒)
4.43
Polar Moment of Inertia (𝒊𝒏𝟒)
8.87
Tool Joint / Connection Specifications Connection HT PAC Bend Stress Ratio 2.418 OD 3 1/8”
(3.125”) ID 1 ½”
(1.500”) Image Not To Scale
For Representation Only Adjusted Weight 20.07 Lbs / Ft Average Length 31.50 ft Tensile Strength 264,000 Lbs Torsional Strength 8,500 Ft-‐Lbs
Pin Length N/A Minimum Make Up Torque
4,300 Ft-‐Lbs Box Length N/A Hardbanding None Maximum Make
Up Torque 5,100 Ft-‐Lbs
IPC None Average Weight Per Joint Fluid Displacement 0.31
Gal / Ft Fluid Capacity 0.09
Gal / Ft 632 Lbs (287 kgs) Manufacturing Criteria Inspection
Criteria NS-‐2
API Spec 7-‐2 / FPUK NS-‐1
The information on this specification sheet is provided for illustration purposes only and is taken from information available
from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy of the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
1 Page 1
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
IMSF48 Rev1 1st July 2012
SLICK DRILL COLLAR SPECIFICATION SHEET 2.875” X 20.046 lbs/ft TenarisHydril WT23 RANGE 2
TenarisHydril WT23
Slick Drill Collar
Original Equipment Manufacturer
SMF International
Country of Origin
France
Nominal OD 3 1/8” (3.125”)
Nominal ID 1.500”
Steel Grade AISI 4145H Modified
Nominal Weight
20.046#
Nominal Wall Thickness
0.813” Drift Size 1.375”
Drill Collar Capacities Cross Sectional Area Body (𝒊𝒏𝟐)
5.903 Section Modulus (𝒊𝒏𝟑)
2.837
Cross Sectional Area OD (𝒊𝒏𝟐)
7.670 Polar Section Modulus (𝒊𝒏𝟑)
5.674
Cross Sectional Area ID (𝒊𝒏𝟐)
1.767 Moment of Inertia (𝒊𝒏𝟒)
4.43
Polar Moment of Inertia (𝒊𝒏𝟒)
8.87
Tool Joint / Connection Specifications Connection WT23 Bend Stress Ratio 1.680 OD 3 1/8”
(3.125”) ID 1 ½”
(1.500”) Image Not To Scale
For Representation Only Adjusted Weight 20.05 Lbs / Ft Average Length 31.50 ft Tensile Strength 387,000 Lbs Torsional Strength 10,400 Ft-‐Lbs
Pin Length N/A Minimum Make Up Torque
2,200 Ft-‐Lbs Box Length N/A Hardbanding None Maximum Make
Up Torque 8,300 Ft-‐Lbs
IPC None Average Weight Per Joint Fluid Displacement 0.307
Gal / Ft Fluid Capacity 0.092
Gal / Ft 630 Lbs (286 kgs) Manufacturing Criteria Inspection
Criteria NS-‐2
API Spec 7-‐2 / FPUK NS-‐1
The information on this specification sheet is provided for illustration purposes only and is taken from information available
from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy of the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
2 Page 2
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
IMSF48 Rev1 1st July 2012
SLICK DRILL COLLAR SPECIFICATION SHEET 2.875” X 22.20 lbs/ft TenarisHydril WT26 RANGE 2
TenarisHydril WT26
Slick Drill Collar
Original Equipment Manufacturer
Darron Oil Tools Country of Origin
UK
Nominal OD 3 3/8” (3.375”)
Nominal ID 1.750”
Steel Grade AISI 4145H Modified
Nominal Weight
22.20#
Nominal Wall Thickness
Drift Size 1.375”
Drill Collar Capacities Cross Sectional Area Body (𝒊𝒏𝟐)
Section Modulus (𝒊𝒏𝟑)
Cross Sectional Area OD (𝒊𝒏𝟐)
Polar Section Modulus (𝒊𝒏𝟑)
Cross Sectional Area ID (𝒊𝒏𝟐)
Moment of Inertia (𝒊𝒏𝟒)
Polar Moment of Inertia (𝒊𝒏𝟒)
Tool Joint / Connection Specifications Connection WT26 Bend Stress Ratio 1.710 OD 3 3/8”
(3.375”) ID 1 ¾”
(1.750”) Image Not To Scale
For Representation Only Adjusted Weight 22.22 Lbs / Ft Average Length 31.50 ft Tensile Strength 416,000 Lbs Torsional Strength 13,200 Ft-‐Lbs
Pin Length N/A Minimum Make Up Torque
2,800 Ft-‐Lbs Box Length N/A Hardbanding None Maximum Make
Up Torque 9,800 Ft-‐Lbs
IPC None Average Weight Per Joint Fluid Displacement Fluid Capacity
700 Lbs (318 kgs) Manufacturing Criteria Inspection
Criteria NS-‐2
API Spec 7
The information on this specification sheet is provided for illustration purposes only and is taken from information available
from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy of the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
3 Page 3
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
IMSF48 Rev1 1st July 2012
SLICK DRILL COLLAR SPECIFICATION SHEET 4.125” X 34.72 lbs/ft InterDril NC31 RANGE 2
InterDril
Slick Drill Collar
Original Equipment Manufacturer
InterDril (Asia) Ltd
Country of Origin
India
Nominal OD 4 1/8” (4.125”)
Nominal ID 2.000”
Steel Grade AISI 4145H Modified
Nominal Weight
34.72#
Nominal Wall Thickness
Drift Size 1 7/8” (1.625”)
Drill Collar Capacities Cross Sectional Area Body (𝒊𝒏𝟐)
Section Modulus (𝒊𝒏𝟑)
6.510
Cross Sectional Area OD (𝒊𝒏𝟐)
Polar Section Modulus (𝒊𝒏𝟑)
Cross Sectional Area ID (𝒊𝒏𝟐)
Moment of Inertia (𝒊𝒏𝟒)
Polar Moment of Inertia (𝒊𝒏𝟒)
Tool Joint / Connection Specifications Connection NC31 Bend Stress Ratio 2.44 OD 4 1/8”
(4.125”) ID 2”
(2.000”) Image Not To Scale
For Representation Only Adjusted Weight 35.61 Lbs / Ft Average Length 31.00 ft Tensile Strength 495,000 Lbs Torsional Strength 13,200 Ft-‐Lbs
Pin Length N/A Minimum Make Up Torque
5,400 Ft-‐Lbs Box Length N/A Hardbanding None Maximum Make
Up Torque 7,100 Ft-‐Lbs
IPC None Average Weight Per Joint Fluid Displacement 0.531
Gal / Ft Fluid Capacity
Gal / Ft 1,104 Lbs (502 kgs) Manufacturing Criteria Inspection
Criteria NS-‐2
API Spec 7
The information on this specification sheet is provided for illustration purposes only and is taken from information available
from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy of the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
4 Page 4
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
IMSF48 Rev1 1st July 2012
SPIRAL DRILL COLLAR SPECIFICATION SHEET 4.750” X 45.00 lbs/ft InterDril NC38 RANGE 2
InterDril NC38
Spiral Drill Collar
Original Equipment Manufacturer
InterDril (Asia) Ltd
Country of Origin
India
Nominal OD 4 3/4” (4.750”)
Nominal ID 2.250”
Steel Grade AISI 4145H Modified
Nominal Weight
45.00#
Nominal Wall Thickness
Drift Size 2.125”
Drill Collar Capacities Cross Sectional Area Body (𝒊𝒏𝟐)
Section Modulus (𝒊𝒏𝟑)
Cross Sectional Area OD (𝒊𝒏𝟐)
Polar Section Modulus (𝒊𝒏𝟑)
Cross Sectional Area ID (𝒊𝒏𝟐)
Moment of Inertia (𝒊𝒏𝟒)
Polar Moment of Inertia (𝒊𝒏𝟒)
Tool Joint / Connection Specifications Connection WT26 Bend Stress Ratio 1.920 OD 4 3/4”
(4.750”) ID 2.563”
Image Not To Scale
For Representation Only Adjusted Weight 45.10 Lbs / Ft Average Length 31.00 ft Tensile Strength 725,000 Lbs Torsional Strength 17,600 Ft-‐Lbs
Pin Length N/A Minimum Make Up Torque
10,000 Ft-‐Lbs Box Length N/A Hardbanding None Maximum Make
Up Torque 15,000 Ft-‐Lbs
IPC None Average Weight Per Joint Fluid Displacement Fluid Capacity
1,398 Lbs (635 kgs) Manufacturing Criteria Slip Recess Yes Inspection
Criteria NS-‐2
API Spec 7 / NS-‐1 Elevator Recess Yes
The information on this specification sheet is provided for illustration purposes only and is taken from information available
from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy of the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
5 Page 5
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
IMSF48 Rev1 1st July 2012
SPIRAL DRILL COLLAR SPECIFICATION SHEET 4.750” X 45.00 lbs/ft TenarisHydril WT38 RANGE 2
TenarisHydril WT38
Spiral Drill Collar
Original Equipment Manufacturer
InterDril (Asia) Ltd
Country of Origin
India
Nominal OD 4 3/4” (4.750”)
Nominal ID 2.250”
Steel Grade AISI 4145H Modified
Nominal Weight
45.00#
Nominal Wall Thickness
Drift Size 2.125”
Drill Collar Capacities Cross Sectional Area Body (𝒊𝒏𝟐)
Section Modulus (𝒊𝒏𝟑)
Cross Sectional Area OD (𝒊𝒏𝟐)
Polar Section Modulus (𝒊𝒏𝟑)
Cross Sectional Area ID (𝒊𝒏𝟐)
Moment of Inertia (𝒊𝒏𝟒)
Polar Moment of Inertia (𝒊𝒏𝟒)
Tool Joint / Connection Specifications Connection WT26 Bend Stress Ratio 1.420 OD 4 3/4”
(4.750”) ID 2.563”
Image Not To Scale
For Representation Only Adjusted Weight 45.10 Lbs / Ft Average Length 31.00 ft Tensile Strength 846,000 Lbs Torsional Strength 32,000 Ft-‐Lbs
Pin Length N/A Minimum Make Up Torque
9,000 Ft-‐Lbs Box Length N/A Hardbanding None Maximum Make
Up Torque Ft-‐Lbs
IPC None Average Weight Per Joint Fluid Displacement Fluid Capacity
1,398 Lbs (635 kgs) Manufacturing Criteria Inspection
Criteria NS-‐2
API Spec 7
The information on this specification sheet is provided for illustration purposes only and is taken from information available
from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy of the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
6 Page 6
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
IMSF48 Rev1 1st July 2012
SPIRAL DRILL COLLAR SPECIFICATION SHEET 4.750” X 45.00 lbs/ft InterDril PH 6 RANGE 2 Well Test Collars
InterDril PH 6
Spiral Drill Collar
Original Equipment Manufacturer
InterDril (Asia) Ltd
Country of Origin
India
Nominal OD 4 3/4” (4.750”)
Nominal ID 2.250”
Steel Grade AISI 4145H Modified
Nominal Weight
45.00#
Nominal Wall Thickness
Drift Size 2.125”
Drill Collar Capacities Cross Sectional Area Body (𝒊𝒏𝟐)
Section Modulus (𝒊𝒏𝟑)
Cross Sectional Area OD (𝒊𝒏𝟐)
Polar Section Modulus (𝒊𝒏𝟑)
Cross Sectional Area ID (𝒊𝒏𝟐)
Moment of Inertia (𝒊𝒏𝟒)
Polar Moment of Inertia (𝒊𝒏𝟒)
Tool Joint / Connection Specifications Connection PH 6 Bend Stress Ratio OD 4 3/4”
(4.750”) ID 2.563”
Image Not To Scale
For Representation Only Adjusted Weight 45.10 Lbs / Ft Average Length 31.00 ft Tensile Strength 362,000 Lbs Torsional Strength Ft-‐Lbs
Pin Length N/A Minimum Make Up Torque
6,500 Ft-‐Lbs Box Length N/A Hardbanding None Maximum Make
Up Torque 8,800 Ft-‐Lbs
IPC None Average Weight Per Joint Fluid Displacement Fluid Capacity
1,398 Lbs (635 kgs) Manufacturing Criteria Slip Recess Special Inspection
Criteria NS-‐2
API Spec 7 / NS-‐1 Elevator Recess Special
The information on this specification sheet is provided for illustration purposes only and is taken from information available
from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy of the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
7 Page 7
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
IMSF48 Rev1 1st July 2012
SPIRAL DRILL COLLAR SPECIFICATION SHEET 6.500” X 87.35 lbs/ft InterDril NC50 RANGE 2
Spiral Drill Collar
Original Equipment Manufacturer
InterDril (Asia) Country of Origin
India
Nominal OD 6 ½” (6.500”)
Nominal ID 2 13/16” (2.8125”)
Steel Grade AISI 4145H Modified
Nominal Weight
87.00#
Nominal Wall Thickness
Drift Size 2.125”
Drill Collar Capacities Cross Sectional Area Body (𝒊𝒏𝟐)
Section Modulus (𝒊𝒏𝟑)
Cross Sectional Area OD (𝒊𝒏𝟐)
Polar Section Modulus (𝒊𝒏𝟑)
Cross Sectional Area ID (𝒊𝒏𝟐)
Moment of Inertia (𝒊𝒏𝟒)
Polar Moment of Inertia (𝒊𝒏𝟒)
Tool Joint / Connection Specifications Connection NC50 Bend Stress Ratio 2.03 OD 6 ½”
(6.500”) ID 2 13/16”
(2.8125”) Image Not To Scale
For Representation Only Adjusted Weight 87.35 Lbs / Ft Average Length 31.00 ft Tensile Strength 1,392,400 Lbs Torsional Strength 52,500 Ft-‐Lbs
Pin Length N/A Recommended Make Up Torque
29,700 Ft-‐Lbs Box Length N/A Hardbanding None Maximum Make
Up Torque Ft-‐Lbs
IPC None Average Weight Per Joint Fluid Displacement Fluid Capacity
2,708 Lbs (1231 kgs) Manufacturing Criteria Slip Recess YES Inspection
Criteria NS-‐2
API Spec 7-‐1 / NS1 Elevator Recess YES
The information on this specification sheet is provided for illustration purposes only and is taken from information available
from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy of the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
8 Page 8
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
IMSF48 Rev1 1st July 2012
SPIRAL DRILL COLLAR SPECIFICATION SHEET 6.500” X 87.35 lbs/ft VAM Drilling NC50 RANGE 2
Spiral Drill Collar
Original Equipment Manufacturer
VAM Drilling Country of Origin
France
Nominal OD 6 ½” (6.500”)
Nominal ID 2 13/16” (2.8125”)
Steel Grade AISI 4145H Modified
Nominal Weight
87.00#
Nominal Wall Thickness
Drift Size 2.125”
Drill Collar Capacities Cross Sectional Area Body (𝒊𝒏𝟐)
Section Modulus (𝒊𝒏𝟑)
Cross Sectional Area OD (𝒊𝒏𝟐)
Polar Section Modulus (𝒊𝒏𝟑)
Cross Sectional Area ID (𝒊𝒏𝟐)
Moment of Inertia (𝒊𝒏𝟒)
Polar Moment of Inertia (𝒊𝒏𝟒)
Tool Joint / Connection Specifications Connection NC50 Bend Stress Ratio 2.03 OD 6 ½”
(6.500”) ID 2 13/16”
(2.8125”) Image Not To Scale
For Representation Only Adjusted Weight 87.35 Lbs / Ft Average Length 31.00 ft Tensile Strength 1,392,400 Lbs Torsional Strength 52,500 Ft-‐Lbs
Pin Length N/A Recommended Make Up Torque
29,700 Ft-‐Lbs Box Length N/A Hardbanding None Maximum Make
Up Torque Ft-‐Lbs
IPC None Average Weight Per Joint Fluid Displacement Fluid Capacity
2,708 Lbs (1231 kgs) Manufacturing Criteria Slip Recess YES Inspection
Criteria NS-‐2
API Spec 7 / NS1 Elevator Recess YES
The information on this specification sheet is provided for illustration purposes only and is taken from information available
from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy of the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
9 Page 9
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
IMSF48 Rev1 1st July 2012
SPIRAL DRILL COLLAR SPECIFICATION SHEET 8.000” X 144.00 lbs/ft Interdril 6-5/8” REG RANGE 2
Spiral Drill Collar
Original Equipment Manufacturer
InterDril (Asia) Country of Origin
India
Nominal OD 8” (8.000”)
Nominal ID 2 13/16” (2.8125”)
Steel Grade AISI 4145H Modified
Nominal Weight
144.00#
Nominal Wall Thickness
Drift Size 2.6875”
Drill Collar Capacities Cross Sectional Area Body (𝒊𝒏𝟐)
Section Modulus (𝒊𝒏𝟑)
Cross Sectional Area OD (𝒊𝒏𝟐)
Polar Section Modulus (𝒊𝒏𝟑)
Cross Sectional Area ID (𝒊𝒏𝟐)
Moment of Inertia (𝒊𝒏𝟒)
Polar Moment of Inertia (𝒊𝒏𝟒)
Tool Joint / Connection Specifications Connection 6-‐5/8” API
Regular Bend Stress Ratio 2.60
OD 8” (8.000”)
ID 2 13/16” (2.8125”)
Image Not To Scale For Representation Only
Adjusted Weight 144.00 Lbs / Ft Average Length 31.00 ft Tensile Strength 1,834,500 Lbs Torsional Strength 85,500 Ft-‐Lbs
Pin Length N/A Recommended Make Up Torque
53,300 Ft-‐Lbs Box Length N/A Hardbanding None Maximum Make
Up Torque Ft-‐Lbs
IPC None Average Weight Per Joint Fluid Displacement Fluid Capacity
4,464 Lbs (2029 kgs) Manufacturing Criteria Slip Recess YES Inspection
Criteria NS-‐2
API Spec 7-‐1 / NS1 Elevator Recess YES
The information on this specification sheet is provided for illustration purposes only and is taken from information available
from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy of the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
10 Page 10
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
IMSF48 Rev1 1st July 2012
SPIRAL DRILL COLLAR SPECIFICATION SHEET 8.000” X 144.00 lbs/ft Shuguang 6-5/8” REG RANGE 2
Spiral Drill Collar
Original Equipment Manufacturer
Shuguang Huayang Drilling Tools
Country of Origin
China
Nominal OD 8” (8.000”)
Nominal ID 2 13/16” (2.8125”)
Steel Grade AISI 4145H Modified
Nominal Weight
144.00#
Nominal Wall Thickness
Drift Size 2.6875”
Drill Collar Capacities Cross Sectional Area Body (𝒊𝒏𝟐)
Section Modulus (𝒊𝒏𝟑)
Cross Sectional Area OD (𝒊𝒏𝟐)
Polar Section Modulus (𝒊𝒏𝟑)
Cross Sectional Area ID (𝒊𝒏𝟐)
Moment of Inertia (𝒊𝒏𝟒)
Polar Moment of Inertia (𝒊𝒏𝟒)
Tool Joint / Connection Specifications Connection 6-‐5/8” API
Regular Bend Stress Ratio 2.60
OD 8” (8.000”)
ID 2 13/16” (2.8125”)
Image Not To Scale For Representation Only
Adjusted Weight 144.00 Lbs / Ft Average Length 31.00 ft Tensile Strength 1,834,500 Lbs Torsional Strength 85,500 Ft-‐Lbs
Pin Length N/A Recommended Make Up Torque
53,300 Ft-‐Lbs Box Length N/A Hardbanding None Maximum Make
Up Torque Ft-‐Lbs
IPC None Average Weight Per Joint Fluid Displacement Fluid Capacity
4,464 Lbs (2029 kgs) Manufacturing Criteria Slip Recess YES Inspection
Criteria NS-‐2
API Spec 7-‐1 / NS1 Elevator Recess NO
The information on this specification sheet is provided for illustration purposes only and is taken from information available
from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy of the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
11 Page 11
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
IMSF48 Rev1 1st July 2012
SPIRAL DRILL COLLAR SPECIFICATION SHEET 8.000” X 144.00 lbs/ft Subdrill 6-5/8” REG RANGE 2
Spiral Drill Collar
Original Equipment Manufacturer
Country of Origin
Nominal OD 8” (8.000”)
Nominal ID 2 13/16” (2.8125”)
Steel Grade AISI 4145H Modified
Nominal Weight
144.00#
Nominal Wall Thickness
Drift Size 2.6875”
Drill Collar Capacities Cross Sectional Area Body (𝒊𝒏𝟐)
Section Modulus (𝒊𝒏𝟑)
Cross Sectional Area OD (𝒊𝒏𝟐)
Polar Section Modulus (𝒊𝒏𝟑)
Cross Sectional Area ID (𝒊𝒏𝟐)
Moment of Inertia (𝒊𝒏𝟒)
Polar Moment of Inertia (𝒊𝒏𝟒)
Tool Joint / Connection Specifications Connection 6-‐5/8” API
Regular Bend Stress Ratio 2.60
OD 8” (8.000”)
ID 2 13/16” (2.8125”)
Image Not To Scale For Representation Only
Adjusted Weight 144.00 Lbs / Ft Average Length 31.00 ft Tensile Strength 1,834,500 Lbs Torsional Strength 85,500 Ft-‐Lbs
Pin Length N/A Recommended Make Up Torque
53,300 Ft-‐Lbs Box Length N/A Hardbanding None Maximum Make
Up Torque Ft-‐Lbs
IPC None Average Weight Per Joint Fluid Displacement Fluid Capacity
4,464 Lbs (2029 kgs) Manufacturing Criteria Slip Recess YES Inspection
Criteria NS-‐2
API Spec 7 Elevator Recess YES
The information on this specification sheet is provided for illustration purposes only and is taken from information available
from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy of the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
12 Page 12
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
IMSF48 Rev1 1st July 2012
SPIRAL DRILL COLLAR SPECIFICATION SHEET 9.500” X 187.47 lbs/ft Subdrill 7-5/8” REG RANGE 2
Spiral Drill Collar
Original Equipment Manufacturer
Shuguang Huayang Drilling Tools
Country of Origin
China
Nominal OD 9 ½” (9.500”)
Nominal ID 3” (3.000”)
Steel Grade AISI 4145H Modified
Nominal Weight
187.47#
Nominal Wall Thickness
3.250” Drift Size 2.875”
Drill Collar Capacities Cross Sectional Area Body (𝒊𝒏𝟐)
63.814 Section Modulus (𝒊𝒏𝟑)
83.336
Cross Sectional Area OD (𝒊𝒏𝟐)
70.882 Polar Section Modulus (𝒊𝒏𝟑)
166.671
Cross Sectional Area ID (𝒊𝒏𝟐)
7.069 Moment of Inertia (𝒊𝒏𝟒)
Polar Moment of Inertia (𝒊𝒏𝟒)
Tool Joint / Connection Specifications Connection 7-‐5/8” API
Regular Bend Stress Ratio 2.815
OD 9 ½” (9.500”)
ID 3” (3.000”)
Image Not To Scale For Representation Only
Adjusted Weight 187.47 lbs/ft Average Length 31.00 ft Tensile Strength 2,629,751 Lbs Torsional Strength 141,729 Ft-‐Lbs
Pin Length N/A Recommended Make Up Torque
88,580 Ft-‐Lbs Box Length N/A Hardbanding None Maximum Make
Up Torque 97,439 Ft-‐Lbs
IPC None Average Weight Per Joint Fluid Displacement 2.86 gal/ft Fluid Capacity 0.37 gal/ft
5,812 Lbs (2642 kgs) Manufacturing Criteria Slip Recess YES Inspection
Criteria NS-‐2
API Spec 7 Elevator Recess YES
The information on this specification sheet is provided for illustration purposes only and is taken from information available
from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy of the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
13 Page 13
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
IMSF47 Rev1 1st July 2012
DRILL PIPE SPECIFICATION SHEET 2.875” X 10.40 lbs/ft GRANT PRIDECO HT PAC RANGE 2
NOV Grant Prideco
Original Equipment Manufacturer
NOV Grant Prideco USA
Country of Origin
USA
Nominal OD 2-‐7/8” (2.875”)
Premium 2.730”
Nominal ID 2.151” Premium 2.151” Steel Grade S-‐135 Nominal
Weight 10.40#
Nominal Wall Thickness
0.362” Drift Size 1.375”
Pipe Body Capacities Yield Strength 385,000 LBS Premium 299,800 API Collapse 29,716 psi Premium 25,602 Torsional Yield Strength
20,800 Ft-‐Lbs Premium 15,900
Pipe Burst Resistance
29,747 psi Premium 28,602
Tool Joint / Connection Specifications Connection HT PAC Compatible
With
OD 3 1/8” (3.125”)
ID 1 ½” (1.500”)
Image Not To Scale For Representation Only
Adjusted Weight 10.53 Lbs / Ft Average Length 31.5 ft Tensile yield 273,000 Lbs 1215 KN Torsional Yield 8,500 Ft-‐Lbs 11486 NM
Pin Length 9” Minimum Make Up Torque
4,300 Ft-‐Lbs 5810 NM Box Length 13” Hardbanding None Maximum Make
Up Torque 5,100 Ft-‐Lbs 6892 NM
IPC TK34P Average Weight Per Joint Fluid Displacement 0.161
Gal / Ft Fluid Capacity 0.183
Gal / Ft 332 Lbs (148 kgs) Manufacturing Criteria Type of Upset IU
Inspection Criteria
NS-‐2 API Spec 5DP(PSL1) / NS-‐1
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy
of the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
14 Page 14
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
IMSF47 Rev1 1st July 2012
DRILL PIPE SPECIFICATION SHEET 2.875” X 10.40 lbs/ft TenarisHydril WT 23 RANGE 2
Tenaris Hydril
Wedge Thread Drill Pipe
WT23
Original Equipment Manufacturer
Hydril Country of Origin
USA
Nominal OD 2-‐7/8” (2.875”)
Premium 2.209”
Nominal ID 2.151” Premium 2.151” Steel Grade S-‐135 Nominal
Weight 10.40#
Nominal Wall Thickness
0.362” Drift Size 1.375”
Pipe Body Capacities Yield Strength 386,000 LBS Premium API Collapse 29,720 psi Premium Torsional Yield Strength
21,000 Ft-‐Lbs Premium
Pipe Burst Resistance
29,750 psi Premium
Tool Joint / Connection Specifications Connection WT 23 Compatible
With
OD 3 1/8” (3.125”)
ID 1 ½” (1.500”)
Image Not To Scale For Representation Only
Adjusted Weight 10.50 Lbs / Ft Average Length 30.5 ft Tensile yield 387,000 Lbs Torsional Yield 10,400 Ft-‐Lbs
Pin Length 12” Minimum Make Up Torque
2,200 Ft-‐Lbs Box Length 10” Hardbanding None Maximum Make
Up Torque 8,300 Ft-‐Lbs
IPC TK34P Average Weight Per Joint Fluid Displacement 0.16
Gal / Ft Fluid Capacity 0.18
Gal / Ft 320 Lbs (148 kgs) Manufacturing Criteria Type of Upset IU
Inspection Criteria
NS-‐2 API Spec 5DP
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy
of the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
15 Page 15
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
IMSF47 Rev1 1st July 2012
DRILL PIPE SPECIFICATION SHEET 2.875” X 10.40 lbs/ft TenarisHydril WT 23 RANGE 2
Tenaris Hydril
Wedge Thread Drill Pipe
WT23
Original Equipment Manufacturer
Hydril Country of Origin
USA
Nominal OD 2-‐7/8” (2.875”)
Premium 2.209”
Nominal ID 2.151” Premium 2.151” Steel Grade S-‐135 Nominal
Weight 10.40#
Nominal Wall Thickness
0.362” Drift Size 1.375”
Pipe Body Capacities Yield Strength 386,000 LBS Premium API Collapse 29,720 psi Premium Torsional Yield Strength
21,000 Ft-‐Lbs Premium
Pipe Burst Resistance
29,750 psi Premium
Tool Joint / Connection Specifications Connection WT 23 Compatible
With
OD 3 1/8” (3.125”)
ID 1 ½” (1.500”)
Image Not To Scale For Representation Only
Adjusted Weight 10.50 Lbs / Ft Average Length 30.5 ft Tensile yield 387,000 Lbs Torsional Yield 10,400 Ft-‐Lbs
Pin Length 12” Minimum Make Up Torque
2,200 Ft-‐Lbs Box Length 10” Hardbanding Armacor M Maximum Make
Up Torque 8,300 Ft-‐Lbs
IPC TK34P Average Weight Per Joint Fluid Displacement 0.16
Gal / Ft Fluid Capacity 0.18
Gal / Ft 320 Lbs (148 kgs) Manufacturing Criteria Type of Upset IU
Inspection Criteria
NS-‐2 API Spec 5DP
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy
of the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
16 Page 16
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
IMSF47 Rev1 1st July 2012
DRILL PIPE SPECIFICATION SHEET 2.875” X 10.40 lbs/ft TenarisHydril WT 26 RANGE 2
Tenaris Hydril
Wedge Thread Drill Pipe
WT26
Original Equipment Manufacturer
Hydril Country of Origin
USA
Nominal OD 2-‐7/8” (2.875”)
Premium 2.209”
Nominal ID 2.151” Premium 2.151” Steel Grade S-‐135 Nominal
Weight 10.40#
Nominal Wall Thickness
0.362” Drift Size 1.625”
Pipe Body Capacities Yield Strength 386,000 LBS Premium API Collapse 29,720 psi Premium Torsional Yield Strength
21,000 Ft-‐Lbs Premium
Pipe Burst Resistance
29,750 psi Premium
Tool Joint / Connection Specifications Connection WT 23 Compatible
With
OD 3 3/8” (3.375”)
ID 1 ¾” (1.750”)
Image Not To Scale For Representation Only
Adjusted Weight 10.50 Lbs / Ft Average Length 30.5 ft Tensile yield 387,000 Lbs Torsional Yield 10,400 Ft-‐Lbs
Pin Length 12” Minimum Make Up Torque
2,800 Ft-‐Lbs Box Length 10” Hardbanding Arnco 200XT Maximum Make
Up Torque 9,800 Ft-‐Lbs
IPC TK34P Average Weight Per Joint Fluid Displacement 0.16
Gal / Ft Fluid Capacity 0.18
Gal / Ft 320 Lbs (148 kgs) Manufacturing Criteria Type of Upset IU
Inspection Criteria
NS-‐2 API Spec 5DP
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy
of the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
17 Page 17
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
IMSF47 Rev1 1st July 2012
DRILL PIPE SPECIFICATION SHEET
3.500” X 15.50 lbs/ft TenarisNKK NC38 DSTJ RANGE 2
Tenaris NKK Tubulars
Double Shoulder Tool Joint (DSTJ)
Drill Pipe
Original Equipment Manufacturer
Tenaris NKK Tubulars
Country of Origin
Japan
Nominal OD 3 ½” (3.500”)
Premium 3.320”
Nominal ID 2.602” Premium 2.602”
Steel Grade S-135 Nominal Weight
15.50#
Nominal Wall Thickness
0.449” Drift Size 2 7/16” (2.4375”)
Pipe Body Capacities
Yield Strength 581,000 LBS Premium 451,120
API Collapse 30,180 psi Premium 25,960
Torsional Yield Strength
37,950 Ft-Lbs Premium 29,060
Pipe Burst Resistance
30,310 psi Premium 27,710
Tool Joint / Connection Specifications
Connection NC38 DSTJ Compatible With
NC38 GPDS 38
OD 5” (5.000”)
ID 2 9/16”” (2.5625”)
Image Not To Scale For Representation Only
Adjusted Weight 16.96 Lbs / Ft Average Length 31.5 ft
Tensile yield 703,300 Lbs
Torsional Yield 26,940 Ft-Lbs
Pin Length 10.5” Minimum Make Up Torque
16,200 Ft-Lbs
Box Length 15.0”
Hardbanding Arnco 300XT Maximum Make Up Torque
18,900 Ft-Lbs
IPC TK34P
Average Weight Per Joint Fluid Displacement 0.259 Gal / Ft
Fluid Capacity 0.275 Gal / Ft 535 Lbs (243 kgs)
Manufacturing Criteria Type of Upset IEU
Inspection Criteria
NS-2
API Spec 5DP(PSL1) / NS-1
The information on this specification sheet is provided for illustration purposes only and is taken from information available
from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy of the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
18 Page 18
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
IMSF47 Rev1 1st July 2012
DRILL PIPE SPECIFICATION SHEET
4.000” X 14.00 lbs/ft NOV GrantPrideco XT39 RANGE 2
NOV Grant Prideco
XT39 Drill Pipe Connection
Original Equipment Manufacturer
NOV Grant Prideco
Country of Origin
USA
Nominal OD 4” (4.000”)
Premium 3.868”
Nominal ID 3.340” Premium 3.340”
Steel Grade S-135 Nominal Weight
14.00#
Nominal Wall Thickness
0.330” Drift Size 2.563”
Pipe Body Capacities
Yield Strength 513,600 LBS Premium 403,500
API Collapse 20,141 psi Premium 13,836
Torsional Yield Strength
41,900 Ft-Lbs Premium 32,800
Pipe Burst Resistance
19,491 psi Premium 17,820
Tool Joint / Connection Specifications
Connection XT 39 Compatible With
OD 4-7/8” (4.875”)
ID 2-11/16”” (2.688”)
Image Not To Scale For Representation Only
Adjusted Weight 16.19 Lbs / Ft Average Length 31.5 ft
Tensile yield 662,200 Lbs
Torsional Yield 35,300 Ft-Lbs
Pin Length 10.0” Minimum Make Up Torque
17,700 Ft-Lbs
Box Length 15.0”
Hardbanding Arnco 300XT Maximum Make Up Torque
21,200 Ft-Lbs
IPC TK34P
Average Weight Per Joint Fluid Displacement 0.25 Gal / Ft
Fluid Capacity 0.43 Gal / Ft 494 Lbs (225 kgs)
Manufacturing Criteria Type of Upset IU
Inspection Criteria
NS-2
API Spec 5DP(PSL1) / NS-1
The information on this specification sheet is provided for illustration purposes only and is taken from information available
from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy of the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
19 Page 19
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
IMSF47 Rev1 1st July 2012
DRILL PIPE SPECIFICATION SHEET 4.000” X 14.00 lbs/ft NOV GrantPrideco TurboTorque (TT) 390
RANGE 2
NOV Grant Prideco
TurboTorque TT390 Drill Pipe Connection
Original Equipment Manufacturer
NOV Grant Prideco
Country of Origin
USA
Nominal OD 4” (4.000”)
Premium 3.868”
Nominal ID 3.340” Premium 3.340” Steel Grade S-‐135T Nominal
Weight 14.00#
Nominal Wall Thickness
0.330” Drift Size 2.438”
Pipe Body Capacities Yield Strength 513,600 LBS Premium 403,500 API Collapse 20,141 psi Premium 13,836 Torsional Yield Strength
41,900 Ft-‐Lbs Premium 32,800
Pipe Burst Resistance
19,491 psi Premium 17,820
Tool Joint / Connection Specifications Connection TT390 Compatible
With
OD 5” (5.000”)
ID 2-‐9/16”” (2.563”)
Image Not To Scale For Representation Only
Adjusted Weight 16.62 Lbs / Ft Average Length 31.5 ft Tensile yield 753,700 Lbs Torsional Yield 47,200 Ft-‐Lbs
Pin Length 10.0” Minimum Make Up Torque
23,600 Ft-‐Lbs Box Length 15.0” Hardbanding Arnco 300XT Maximum Make
Up Torque 33,000 Ft-‐Lbs
IPC TK34P Average Weight Per Joint Fluid Displacement 0.25
Gal / Ft Fluid Capacity 0.43
Gal / Ft 494 Lbs (225 kgs) Manufacturing Criteria Type of Upset IU
Inspection Criteria
NS-‐2 API Spec 5DP(PSL1) / NS-‐1
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy
of the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
20 Page 20
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
IMSF47 Rev1 1st July 2012
DRILL PIPE SPECIFICATION SHEET
5.000” X 19.50 lbs/ft TenarisNKK NC50 DSTJ RANGE 2
Tenaris NKK Tubulars
Double Shoulder Tool Joint (DSTJ)
Drill Pipe
Original Equipment Manufacturer
Tenaris NKK Tubulars
Country of Origin
Japan
Nominal OD 5” (5.000”)
Premium 4.855”
Nominal ID 4.276” Premium 4.276”
Steel Grade S-135 Nominal Weight
19.50#
Nominal Wall Thickness
0.362” Drift Size 3 1/8” (3.125”)
Pipe Body Capacities
Yield Strength 712,070 LBS Premium 560,770
API Collapse 15,650 psi Premium 10,010
Torsional Yield Strength
74,100 Ft-Lbs Premium 58,110
Pipe Burst Resistance
17,100 psi Premium 15,640
Tool Joint / Connection Specifications
Connection NC50 DSTJ Compatible With
NC50 GPDS 50
OD 6 5/8” (6.625”)
ID 3 ¼” (3.250”)
Image Not To Scale For Representation Only
Adjusted Weight 22.80 Lbs / Ft Average Length 31.5 ft
Tensile yield 1,374,700 Lbs
Torsional Yield 71,240 Ft-Lbs
Pin Length 10.5” Minimum Make Up Torque
42,700 Ft-Lbs Premium (6-5/16” OD TJ) 42,700 ft-Lbs Box Length 15.0”
Hardbanding Arnco 300XT Maximum Make Up Torque
49,900 Ft-Lbs Premium (6-5/16” OD TJ) 46,200 ft-Lbs IPC TK34P
Average Weight Per Joint Fluid Displacement 0.366 Gal / Ft
Fluid Capacity 0.698 Gal / Ft 718 Lbs (326 kgs)
Manufacturing Criteria Type of Upset IEU
Inspection Criteria
NS-2
API Spec 5DP(PSL1) / NS-1
The information on this specification sheet is provided for illustration purposes only and is taken from information available
from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy of the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
21 Page 21
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
IMSF47 Rev1 1st July 2012
DRILL PIPE SPECIFICATION SHEET
5.000” X 19.50 lbs/ft Grant Prideco GPDS50 RANGE 2
Grant Prideco Double Shoulder (GPDS)
Drill Pipe
Original Equipment Manufacturer
NOV Grant Prideco
Country of Origin
USA
Nominal OD 5” (5.000”)
Premium 4.855”
Nominal ID 4.276” Premium 4.276”
Steel Grade S-135 Nominal Weight
19.50#
Nominal Wall Thickness
0.362” Drift Size 3 1/8” (3.125”)
Pipe Body Capacities
Yield Strength 712,100 LBS Premium 560,800
API Collapse 15,672 psi Premium 10,029
Torsional Yield Strength
74,100 Ft-Lbs Premium 58,100
Pipe Burst Resistance
17,105 psi Premium 15,638
Tool Joint / Connection Specifications
Connection GPDS 50 Compatible With
NC50 NC50 DSTJ
OD 6 5/8” (6.625”)
ID 3 ¼” (3.250”)
Image Not To Scale For Representation Only
Adjusted Weight 24.94 Lbs / Ft Average Length 31.96 ft
Tensile yield 1,250,000 Lbs
Torsional Yield 72,200 Ft-Lbs
Pin Length 11.0” Minimum Make Up Torque
36,100 Ft-Lbs
Box Length 15.0”
Hardbanding Arnco 300XT Maximum Make Up Torque
43,300 Ft-Lbs
IPC TK34XT
Average Weight Per Joint Fluid Displacement 0.38 Gal / Ft
Fluid Capacity 0.70 Gal / Ft 767 Lbs (348 kgs)
Manufacturing Criteria Type of Upset IEU
Inspection Criteria
NS-2
API Spec 5DP(PSL1) / NS-1
The information on this specification sheet is provided for illustration purposes only and is taken from information available
from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy of the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
22 Page 22
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
IMSF47 Rev1 1st July 2012
DRILL PIPE SPECIFICATION SHEET
5.500” X 21.90 lbs/ft TenarisNKK FH DSTJ RANGE 2
Tenaris NKK Tubulars
Double Shoulder Tool Joint (DSTJ)
Drill Pipe
Original Equipment Manufacturer
Tenaris NKK Tubulars
Country of Origin
Japan
Nominal OD 5 ½” (5.500”)
Premium 5.356”
Nominal ID 4.778” Premium 4.778”
Steel Grade S-135 Nominal Weight
21.90#
Nominal Wall Thickness
0.361” Drift Size 3 3/8” (3.375”)
Pipe Body Capacities
Yield Strength 786,810 LBS Premium 620,610
API Collapse 12,680 psi Premium 7,520
Torsional Yield Strength
91,280 Ft-Lbs Premium 71,750
Pipe Burst Resistance
15,510 psi Premium 14,180
Tool Joint / Connection Specifications
Connection 5 ½” FH DSTJ Compatible With
5 ½” FH GPDS 55
OD 7” (7.000”)
ID 3 ½” (3.500”)
Image Not To Scale For Representation Only
Adjusted Weight 24.97 Lbs / Ft Average Length 31.5 ft
Tensile yield 1,754,200 Lbs
Torsional Yield 88,570 Ft-Lbs
Pin Length 10.5” Minimum Make Up Torque
53,100 Ft-Lbs
Box Length 15.0”
Hardbanding Arnco 300XT Maximum Make Up Torque
62,000 Ft-Lbs
IPC TK34P
Average Weight Per Joint Fluid Displacement 0.402 Gal / Ft
Fluid Capacity 0.870 Gal / Ft 787 Lbs (358 kgs)
Manufacturing Criteria Type of Upset IEU
Inspection Criteria
NS-2
API Spec 5DP(PSL1) / NS-1
The information on this specification sheet is provided for illustration purposes only and is taken from information available
from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy of the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
23 Page 23
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
IMSF47 Rev1 1st July 2012
DRILL PIPE SPECIFICATION SHEET
5.875” X 23.40 lbs/ft NOV GrantPrideco XT57 RANGE 2
NOV Grant Prideco
XT57 Drill Pipe Connection
Original Equipment Manufacturer
NOV Grant Prideco
Country of Origin
USA
Nominal OD 5 7/8” (5.875”)
Premium 5.731”
Nominal ID 5.153” Premium 5.153”
Steel Grade S-135 Nominal Weight
23.40#
Nominal Wall Thickness
0.361” Drift Size 4.125”
Pipe Body Capacities
Yield Strength 844,200 LBS Premium 666,500
API Collapse 10,825 psi Premium 6,204
Torsional Yield Strength
105,500 Ft-Lbs Premium 83,000
Pipe Burst Resistance
14,517 psi Premium 13,273
Tool Joint / Connection Specifications
Connection XT 57 Compatible With
OD 7” (7.000”)
ID 4 ¼” (4.250”)
Image Not To Scale For Representation Only
Adjusted Weight 28.17 Lbs / Ft Average Length 31.5 ft
Tensile yield 1,198,100 Lbs
Torsional Yield 94,300 Ft-Lbs
Pin Length 12.0” Minimum Make Up Torque
47,200 Ft-Lbs
Box Length 17.0”
Hardbanding TCS-Ti Maximum Make Up Torque
56,600 Ft-Lbs
IPC TK34P
Average Weight Per Joint Fluid Displacement 0.43 Gal / Ft
Fluid Capacity 1.04 Gal / Ft 865 Lbs (393 kgs)
Manufacturing Criteria Type of Upset IEU
Inspection Criteria
NS-2
API Spec 5DP(PSL1) / NS-1
The information on this specification sheet is provided for illustration purposes only and is taken from information available
from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy of the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
24 Page 24
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
IMSF49 Rev1 1st July 2012
HEAVY WEIGHT DRILL PIPE SPECIFICATION SHEET
3.500” X INTEGRATED HWDP NC38 DSTJ RANGE 2
Original Equipment Manufacturer
Interdril (Asia) Country of Origin
India
Nominal OD 3 ½” (3.500”)
Premium
Nominal ID 2 ¼” Premium
Steel Grade AISI 4145 H modified
Nominal Weight
23.50#
Nominal Wall Thickness
5/8” (0.625”)
Drift Size 2 1/8” (2.125”)
Pipe Body Capacities
Yield Strength 677,408 Lbs
API Collapse 17,574 PSI
Torsional Yield Strength
40,258 Ft-Lbs
Pipe Burst Resistance
42,857 PSI
Tool Joint / Connection Specifications
Connection NC38 DSTJ Compatible With
NC38 GPDS 38
OD 5” (5.000”)
ID 2-1/4” (2.250”)
Image Not To Scale For Representation Only
TYPE of Tool Joint INTEGRAL Non Welded
Adjusted Weight 25.71 Lbs / Ft Average Length 31.0 ft
Tensile yield 775,250 Lbs
Pin Length 24” Torsional Yield 28,810 Ft-Lbs
Box Length 24”
Hardbanding Arnco 300XT Make Up Torque 11,500 Ft-Lbs
Hardbanding Centre Wear Pad
Arnco 300XT
Average Weight Per Joint Centre Upset OD 4” (4.000”)
Fluid Capacity Gal / Ft 797 Lbs (362 kgs)
Manufacturing Criteria Type of Upset Inspection Criteria
NS-2
API Spec 7-1 / NS-1
The information on this specification sheet is provided for illustration purposes only and is taken from information available
from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy of the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
25 Page 25
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
IMSF49 Rev1 1st July 2012
HEAVY WEIGHT DRILL PIPE SPECIFICATION SHEET 3.500” X WELDED HWDP NC38 RANGE 2
Original Equipment Manufacturer
VAM Drilling Country of Origin
France
Nominal OD 3 ½” (3.500”)
Premium
Nominal ID 2 9/16” Premium Steel Grade AISI 4145 H
modified Nominal Weight
19.00#
Nominal Wall Thickness
13/32” (0.40625”)
Drift Size 2 7/16” (2.4375”)
Pipe Body Capacities Yield Strength 536,000 Lbs API Collapse 27,800 PSI Torsional Yield Strength
34,600 Ft-‐Lbs
Pipe Burst Resistance
32,100 PSI
Tool Joint / Connection Specifications Connection NC38 Compatible
With NC38 DSTJ GPDS 38
OD 5” (5.000”)
ID 2-‐9/16” (2.5625”)
Image Not To Scale For Representation Only
TYPE of Tool Joint WELDED Adjusted Weight 19.16 Lbs / Ft Average Length 31.0 ft Tensile yield 649,000 Lbs
Pin Length 24” Torsional Yield 23,600 Ft-‐Lbs
Box Length 24” Hardbanding Arnco 300XT Make Up Torque 11,500 Ft-‐Lbs
Hardbanding Centre Wear Pad
PRO-‐CASING
Average Weight Per Joint Centre Upset OD 4” (4.000”)
Fluid Capacity Gal / Ft 594 Lbs (270 kgs)
Manufacturing Criteria Type of Upset Inspection Criteria
NS-‐2 API Spec 7-‐1 / NS-‐1
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy
of the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
26 Page 26
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
IMSF49 Rev1 1st July 2012
HEAVY WEIGHT DRILL PIPE SPECIFICATION SHEET 4.000” X WELDED HWDP XT39 RANGE 2
Original Equipment Manufacturer
Grant Prideco Country of Origin
USA
Nominal OD 4” (4.000”)
Premium
Nominal ID 2 9/16” Premium Steel Grade AISI 4145 H
modified Nominal Weight
24.32#
Nominal Wall Thickness
23/32” (0.719”)
Drift Size 2 7/16” (2.4375”)
Pipe Body Capacities Yield Strength 704,100 Lbs API Collapse 28,014 PSI Torsional Yield Strength
47,700 Ft-‐Lbs
Pipe Burst Resistance
29,883 PSI
Tool Joint / Connection Specifications Connection XT39 Compatible
With
OD 4-‐7/8” (4.875”)
ID 2-‐9/16” (2.5625”)
Image Not To Scale For Representation Only
TYPE of Tool Joint WELDED Adjusted Weight 28.38 Lbs / Ft Average Length 31.0 ft Tensile yield 724,100 Lbs
Pin Length 24” Torsional Yield 37,000 Ft-‐Lbs
Box Length 24” Hardbanding Arnco 300XT Recommended
Make Up Torque 22,200 Ft-‐Lbs
Hardbanding Centre Wear Pad
Smooth-‐X
Average Weight Per Joint Centre Upset OD 4 ½” (4.500”)
Fluid Capacity 0.27 Gal / Ft 927 Lbs (421 kgs)
Manufacturing Criteria Type of Upset Inspection Criteria
NS-‐2 API Spec 7-‐1 / NS-‐1
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy
of the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
27 Page 27
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
IMSF49 Rev1 1st July 2012
HEAVY WEIGHT DRILL PIPE SPECIFICATION SHEET 4.000” X WELDED TRI-SPIRAL HWDP TT390 RANGE 2
Original Equipment Manufacturer
NOV Grant Prideco
Country of Origin
USA
Nominal OD 4” (4.000”)
Premium
Nominal ID 2 9/16” Premium Steel Grade HW-‐105 Nominal
Weight
Nominal Wall Thickness
23/32” (0.720”)
Drift Size 2 5/16” (2.312”)
Pipe Body Capacities Yield Strength 778,200 Lbs API Collapse 30,962 PSI Torsional Yield Strength
52,800 Ft-‐Lbs
Pipe Burst Resistance
33,029 PSI
Tool Joint / Connection Specifications Connection TurboTorque
390 Compatible With
OD 5” (5.000”)
ID 2-‐9/16” (2.5625”)
Image Not To Scale For Representation Only
TYPE of Tool Joint INTEGRAL Non Welded Adjusted Weight 31.51 Lbs / Ft Average Length 31.0 ft Tensile yield 754,200 Lbs
Pin Length 24” Torsional Yield 47,200 Ft-‐Lbs
Box Length 24” Hardbanding TCS-‐Ti Recommended
Make Up Torque 33,000 Ft-‐Lbs 23,600
Ft-‐Lbs (Min)
Hardbanding Centre Wear Pad
Smooth-‐X
Average Weight Per Joint Fluid Displacement 0.47 Gal / Ft Fluid Capacity 0.27 Gal / Ft 977 Lbs (444 kgs)
Manufacturing Criteria Type of Upset Inspection Criteria
NS-‐2 API Spec 7-‐1 / NS-‐1
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy
of the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
28 Page 28
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
IMSF49 Rev1 1st July 2012
HEAVY WEIGHT DRILL PIPE SPECIFICATION SHEET 5.000” X INTEGRATED HWDP NC50 RANGE 2
Original Equipment Manufacturer
Interdril (Asia) Country of Origin
India
Nominal OD 5” (5.000”)
Premium
Nominal ID 3” Premium Steel Grade AISI 4145 H
modified Nominal Weight
50.00#
Nominal Wall Thickness
1.000” Drift Size 2 7/8” (2.875”)
Pipe Body Capacities Yield Strength 1,382,304 Lbs API Collapse 16,110 PSI Torsional Yield Strength
112,977 Ft-‐Lbs
Pipe Burst Resistance
44,000 PSI
Tool Joint / Connection Specifications Connection NC50 Compatible
With NC50 DSTJ GPDS 50
OD 6 5/8” (6.625”)
ID 3” (3.000”)
Image Not To Scale For Representation Only
TYPE of Tool Joint INTEGRAL Non Welded Adjusted Weight 50.38 Lbs / Ft Average Length 31.0 ft Tensile yield 1,546,000 Lbs
Pin Length 24” Torsional Yield 63,100 Ft-‐Lbs
Box Length 24” Hardbanding Arnco 300XT Make Up Torque 30,000 Ft-‐Lbs
Hardbanding Centre Wear Pad
Arnco 300XT
Average Weight Per Joint Centre Upset OD 5 1/8” (5.125”)
Fluid Capacity 0.698 Gal / Ft 1562 Lbs (710 kgs)
Manufacturing Criteria Type of Upset Inspection Criteria
NS-‐2 API Spec 7-‐1 / NS-‐1
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy
of the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
29 Page 29
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
IMSF49 Rev1 1st July 2012
HEAVY WEIGHT DRILL PIPE SPECIFICATION SHEET 5.000” X WELDED HWDP NC50 RANGE 2
Original Equipment Manufacturer
OMSCO Country of Origin
USA
Nominal OD 5” (5.000”)
Premium
Nominal ID 3” Premium Steel Grade AISI 4130 Nominal
Weight 49.00#
Nominal Wall Thickness
1” (1.000”)
Drift Size 2 7/8” (2.875”)
Pipe Body Capacities Yield Strength 942,400 Lbs API Collapse PSI Torsional Yield Strength
77,000 Ft-‐Lbs
Pipe Burst Resistance
PSI
Tool Joint / Connection Specifications Connection NC50 Compatible
With NC50 DSTJ GPDS 50
OD 6 1/2” (6.500”)
ID 3” (3.000”)
Image Not To Scale For Representation Only
TYPE of Tool Joint WELDED 4145 H Mod Adjusted Weight 49.70 Lbs / Ft Average Length 31.0 ft Tensile yield 1,298,461 Lbs
Pin Length 24” Torsional Yield 52,237 Ft-‐Lbs
Box Length 24” Hardbanding Arnco 100XT Make Up Torque 30,000 Ft-‐Lbs
Hardbanding Centre Wear Pad
O-‐1000
Average Weight Per Joint Centre Upset OD 5 ½” (5.500”)
Fluid Capacity Gal / Ft 1,516 Lbs (689 kgs)
Manufacturing Criteria Type of Upset Inspection Criteria
NS-‐2 API Spec 7-‐1 / NS-‐1
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy
of the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
30 Page 30
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
IMSF49 Rev1 1st July 2012
HEAVY WEIGHT DRILL PIPE SPECIFICATION SHEET 5.000” X WELDED HWDP NC50 RANGE 2
Original Equipment Manufacturer
SMFi Country of Origin
France
Nominal OD 5” (5.000”)
Premium
Nominal ID 3” Premium Steel Grade AISI 4130 Nominal
Weight 49.00#
Nominal Wall Thickness
1” (1.000”)
Drift Size 2 7/8” (2.875”)
Pipe Body Capacities Yield Strength 942,400 Lbs API Collapse PSI Torsional Yield Strength
77,000 Ft-‐Lbs
Pipe Burst Resistance
PSI
Tool Joint / Connection Specifications Connection NC50 Compatible
With NC50 DSTJ GPDS 50
OD 6 5/8” (6.625”)
ID 3” (3.000”)
Image Not To Scale For Representation Only
TYPE of Tool Joint WELDED 4145 H Mod Adjusted Weight 50.38 Lbs / Ft Average Length 31.0 ft Tensile yield 1,384,200 Lbs
Pin Length 24” Torsional Yield 56,900 Ft-‐Lbs
Box Length 24” Hardbanding Arnco 100XT Make Up Torque 30,000 Ft-‐Lbs
Hardbanding Centre Wear Pad
PROCASING
Average Weight Per Joint Centre Upset OD 5 ½” (5.500”)
Fluid Capacity Gal / Ft 1,523 Lbs (692 kgs)
Manufacturing Criteria Type of Upset Inspection Criteria
NS-‐2 API Spec 7-‐1 / NS-‐1
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy
of the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
31 Page 31
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
IMSF49 Rev1 1st July 2012
HEAVY WEIGHT DRILL PIPE SPECIFICATION SHEET
5.000” X INTEGRATED HWDP NC50 DSTJ RANGE 2
Original Equipment Manufacturer
Interdril (Asia) Country of Origin
India
Nominal OD 5” (5.000”)
Premium
Nominal ID 3 ¼” (3.250”)
Premium
Steel Grade AISI 4145 H modified
Nominal Weight
49.00#
Nominal Wall Thickness
Drift Size 3 1/8” (3.125”)
Pipe Body Capacities
Yield Strength 1,247,313 Lbs
API Collapse 16,110 PSI
Torsional Yield Strength
106,630 Ft-Lbs
Pipe Burst Resistance
38,500 PSI
Tool Joint / Connection Specifications
Connection NC50 DSTJ Compatible With
NC50 GPDS 50
OD 6 5/8” (6.625”)
ID 3 ¼” (3.250”)
Image Not To Scale For Representation Only
TYPE of Tool Joint INTEGRAL Non Welded
Adjusted Weight 49.13 Lbs / Ft Average Length 31.0 ft
Tensile yield 1,268,960 Lbs
Pin Length 24” Torsional Yield 65,600 Ft-Lbs
Box Length 24”
Hardbanding Arnco 300XT Make Up Torque 30,000 Ft-Lbs
Hardbanding Centre Wear Pad
Arnco 300XT
Average Weight Per Joint Centre Upset OD 5 ½” (5.500”)
Fluid Capacity
1523 Lbs (692 kgs)
Manufacturing Criteria Type of Upset Inspection Criteria
NS-2
API Spec 7-1 / NS-1
The information on this specification sheet is provided for illustration purposes only and is taken from information available
from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy of the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
32 Page 32
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
IMSF49 Rev1 1st July 2012
HEAVY WEIGHT DRILL PIPE SPECIFICATION SHEET 5.500” X WELDED HWDP 5 ½” FH DSTJ RANGE 2
Original Equipment Manufacturer
VAM Drilling Country of Origin
France
Nominal OD 5 ½” (5.500”)
Premium
Nominal ID 3 ½” Premium Steel Grade AISI 4140 Nominal
Weight 54.00#
Nominal Wall Thickness
1” (1.000”)
Drift Size 3 1/8” (3.125”)
Pipe Body Capacities Yield Strength 1,700,000 Lbs API Collapse 35,700 PSI Torsional Yield Strength
158,000 Ft-‐Lbs
Pipe Burst Resistance
43,600 PSI
Tool Joint / Connection Specifications Connection 5 ½” FH DSTJ Compatible
With 5 ½” FH GPDS 55
OD 7” (7.000”)
ID 3 ½” (3.500”)
Image Not To Scale For Representation Only
TYPE of Tool Joint WELDED AISI 4140 Adjusted Weight 54.60 Lbs / Ft Average Length 31.0 ft Tensile yield 1,620,000 Lbs
Pin Length 24” Torsional Yield 81,700 Ft-‐Lbs
Box Length 24” Hardbanding Arnco 300XT Make Up Torque 53,100 Ft-‐Lbs
Hardbanding Centre Wear Pad
PROCASING
Average Weight Per Joint Centre Upset OD 5 ½” (5.500”)
Fluid Capacity Gal / Ft 1,692 Lbs (770 kgs)
Manufacturing Criteria Type of Upset Inspection Criteria
NS-‐2 API Spec 7-‐1 / NS-‐1
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy
of the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
33 Page 33
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
IMSF49 Rev1 1st July 2012
HEAVY WEIGHT DRILL PIPE SPECIFICATION SHEET 5.875” X WELDED HWDP XT57 RANGE 2
Original Equipment Manufacturer
Grant Prideco Country of Origin
USA
Nominal OD 5 7/8” (5.875”)
Premium
Nominal ID 4” Premium Steel Grade AISI 4130
95 Ksi Nominal Weight
Nominal Wall Thickness
0.938” Drift Size 3 7/8” (3.875”)
Pipe Body Capacities Yield Strength 1,381,500 Lbs API Collapse 25,481 PSI Torsional Yield Strength
142,800 Ft-‐Lbs
Pipe Burst Resistance
26,529 PSI
Tool Joint / Connection Specifications Connection 5 7/8” XT57 Compatible
With
OD 7” (7.000”)
ID 4” (4.000”)
Image Not To Scale For Representation Only
TYPE of Tool Joint WELDED AISI 4130 120 Ksi Adjusted Weight 55.14 Lbs / Ft Average Length 31.0 ft Tensile yield 1,394,900 Lbs
Pin Length 24” Torsional Yield 106,200 Ft-‐Lbs
Box Length 24” Hardbanding Arnco 300XT Make Up Torque 63,700 Ft-‐Lbs
Hardbanding Centre Wear Pad
Smooth -‐ X
Average Weight Per Joint Centre Upset OD 6 3/8” (6.375”)
Fluid Capacity 0.84 Gal / Ft 1,709 Lbs (777 kgs)
Manufacturing Criteria Type of Upset Inspection Criteria
NS-‐2 API Spec 7-‐1 / NS-‐1
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy
of the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
34 Page 34
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
TUBING SPECIFICATION SHEET
1.315” X 1.80 lbs/ft TPS Multiseal TS-8
TPS TECHNITUBE
Rohrenwerke GMBH
Original Equipment Manufacturer
TPS Technitube Country of Origin
Germany
Nominal Tubing OD
1.315” Drift Size 0.955”
Steel Grade L-80 Nominal Weight
1.80 lbs/ft
Nominal Wall Thickness
0.133” Nominal ID 1. 049”
Tubing Capacities
Body Yield Strength
40,000 LBS 178 KN
API Collapse 14,550 PSI 1003 BAR
Internal Yield 14,160 PSI 977 BAR
Joint strength 45,600 LBS 203 KN
Connection Specifications
Connection TPS MULTISEAL TS-8
Compatible With
1” Hyd CS
OD 1.552” ID 0.970”
Image Not To Scale For Representation Only
Connection Length 2.40” Minimum
3.24” Standard 1 recut
4.08” Type 2 2 recut
Connection Length 4.92” Type 3 3 recut
(LP – Length Pin) Minimum Make Up Torque
400
Ft/Lbs
540 NM (LB – Length Box)
LB Minimum = LP – 0.23”
Optimum Make Up Torque
450 Ft/Lbs 610 NM
Connection Make Up Loss Maximum Make Up Torque
500 Ft/Lbs 680 NM
2.23”
Manufacturing Criteria Connection Tensile Efficiency
114% Inspection Criteria
API 5A5 API 5CT API 5CT
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy
of the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
35 Page 35
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
TUBING SPECIFICATION SHEET 1.660” X 3.02 lbs/ft TenarisHydril CS
TenarisHydril
CS Integral Upset Tubing
Original Equipment Manufacturer
TenarisHydril Country of Origin
Germany
Nominal Tubing OD
1.660” Drift Size 1.184”
Steel Grade L-‐80 Nominal Weight
3.02 lbs/ft
Nominal Wall Thickness
0.191” Nominal ID 1.278”
Tubing Capacities Body Yield Strength
71,000 LBS 316 KN
API Collapse 16,290 PSI 1123 BAR Internal Yield 16,110 PSI 1111 BAR Joint strength 71,000 LBS 316 KN Connection Specifications Connection 1 ¼”
TenarisHydril CS Compatible With
1.660” TS-‐8
OD 1.927” ID 1.218” Image Not To Scale
For Representation Only Connection Length Minimum
Standard 1 recut Type 2 2 recut
Connection Length Type 3 3 recut Minimum Make Up Torque
600
Ft/Lbs
810 NM
Optimum Make Up Torque
700 Ft/Lbs 946 NM
Connection Make Up Loss Maximum Make Up Torque
800 Ft/Lbs 1081 NM 2.22”
Manufacturing Criteria Connection Tensile Efficiency
100.0% Inspection Criteria
API 5A5 API 5CT API 5CT
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy
of the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
36 Page 36
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
TUBING SPECIFICATION SHEET
1.900” X 3.64 lbs/ft TPS Multiseal TS-8
TPS TECHNITUBE
Rohrenwerke GMBH
Original Equipment Manufacturer
TPS Technitube Country of Origin
Germany
Nominal Tubing OD
1.900” Drift Size 1.286”
Steel Grade L-80 Nominal Weight
3.64 lbs/ft
Nominal Wall Thickness
0.200” Nominal ID 1.500”
Tubing Capacities
Body Yield Strength
85,000 LBS 379 KN
API Collapse 15,070 PSI 1039 BAR
Internal Yield 14,740 PSI 1017 BAR
Joint strength 86,000 LBS 383 KN
Connection Specifications
Connection TPS MULTISEAL TS-8
Compatible With
1 ½” Hyd CS
OD 2.162” ID 1.440”
Image Not To Scale For Representation Only
Connection Length 2.43” Minimum
3.27” Standard 1 recut
4.11” Type 2 2 recut
Connection Length 4.95” Type 3 3 recut
(LP – Length Pin) Minimum Make Up Torque
800
Ft/Lbs
1085 NM (LB – Length Box)
LB Minimum = LP – 0.23”
Optimum Make Up Torque
900 Ft/Lbs 1220 NM
Connection Make Up Loss Maximum Make Up Torque
1000 Ft/Lbs 1360 NM
2.23”
Manufacturing Criteria Connection Tensile Efficiency
101.3% Inspection Criteria
API 5A5 API 5CT API 5CT
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy
of the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
37 Page 37
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
TUBING SPECIFICATION SHEET 2.875” X 8.70 lbs/ft TenarisHydril TSHW533
TenarisHydril
TSHW533 Integral Upset Tubing
Original Equipment Manufacturer
TenarisHydril Country of Origin
UK Romania Argentina
Nominal Tubing OD
2 7/8” (2.875”)
Drift Size 2.165”
Steel Grade P-‐110 Nominal Weight
8.70 lbs/ft
Nominal Wall Thickness
0.308” Nominal ID 2.259”
Tubing Capacities Body Yield Strength
273,000 LBS 1215 KN
API Collapse 21,040 PSI 1450 BAR Internal Yield 20,620 PSI 1422 BAR Joint strength 125,000 LBS 556 KN Connection Specifications Connection 2 7/8”
TSHW533 Compatible With
TSH503 TSH553 TSH563
OD 3.328” ID 2.259” Image Not To Scale
For Representation Only Connection Length Minimum
Standard 1 recut Type 2 2 recut
Connection Length Type 3 3 recut Minimum Make Up Torque
2,500
Ft/Lbs
3378 NM Optimum Make Up Torque
3,000 Ft/Lbs 4054 NM
Connection Make Up Loss Maximum Make Up Torque
4,400 Ft/Lbs 5946 NM 3.64”
Manufacturing Criteria Connection Tensile Efficiency
100% Inspection Criteria
API 5A5 API 5CT API 5CT
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy
of the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
38 Page 38
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
TUBING SPECIFICATION SHEET 3.500” X 12.95 lbs/ft TPS Multiseal TS-6
TPS TECHNITUBE
Rohrenwerke GMBH
Original Equipment Manufacturer
TPS Technitube Country of Origin
Germany
Nominal Tubing OD
3.500” Drift Size 2.625”
Steel Grade L-‐80 Nominal Weight
12.95 lbs/ft
Nominal Wall Thickness
0.375” Nominal ID 2.750”
Tubing Capacities Body Yield Strength
295,000 LBS 1314 KN
API Collapse 15,310 PSI 1056 BAR Internal Yield 15,000 PSI 1034 BAR Joint strength 351,000 LBS 1562 KN Connection Specifications Connection TPS MULTISEAL
TS-‐6 Compatible With
3 ½” PH6 3 ½” RTS-‐6 3 ½” BTS-‐6 3 ½” HITS-‐HD
OD 4.313” ID 2.687” Image Not To Scale
For Representation Only Connection Length 3.77” Minimum
5.03” Standard 1 recut 6.28” Type 2 2 recut
Connection Length 7.54” Type 3 3 recut (LP – Length Pin) Minimum Make
Up Torque 5,500
Ft/Lbs
7460 NM (LB – Length Box)
LB Minimum = LP – 0.43”
Optimum Make Up Torque
6,190 Ft/Lbs 8390 NM
Connection Make Up Loss Maximum Make Up Torque
6,880 Ft/Lbs 9330 NM 3.35”
Manufacturing Criteria Connection Tensile Efficiency
119% Inspection Criteria
API 5A5 API 5CT API 5CT
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy
of the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
39 Page 39
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
TUBING SPECIFICATION SHEET 3.500” X 15.8 lbs/ft TenarisHydril PH6
TenarisHydril
PH6 Integral Upset Tubing
Original Equipment Manufacturer
TenarisHydril Country of Origin
USA
Nominal Tubing OD
3.500” Drift Size 2.423”
Steel Grade T-‐95 Nominal Weight
15.8 lbs/ft
Nominal Wall Thickness
0.476” Nominal ID 2.548”
Tubing Capacities Body Yield Strength
430,000 LBS 1914 KN
API Collapse 22,330 PSI 1540 BAR Internal Yield 22,610 PSI 1559 BAR Joint strength 430,000 LBS 1914 KN Connection Specifications Connection TenarisHydril
PH-‐6 Compatible With
3 ½” TS6 3 ½” RTS-‐6 3 ½” BTS-‐6 3 ½” HITS-‐HD
OD 4.500” ID 2.485” Image Not To Scale
For Representation Only Connection Length Minimum
Standard 1 recut Type 2 2 recut
Connection Length Type 3 3 recut Minimum Make Up Torque
6,400
Ft/Lbs
8648 NM
Optimum Make Up Torque
7,200 Ft/Lbs 9730 NM
Connection Make Up Loss Maximum Make Up Torque
8,000 Ft/Lbs 10810 NM 3.34”
Manufacturing Criteria Connection Tensile Efficiency
100% Inspection Criteria
API 5A5 API 5CT API 5CT
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy
of the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
40 Page 40
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
TUBING SPECIFICATION SHEET 3.500” X 15.8 lbs/ft TenarisHydril TSHW533
TenarisHydril
TSHW533 Integral Upset Tubing
Original Equipment Manufacturer
TenarisHydril Country of Origin
UK Romania Argentina
Nominal Tubing OD
3 ½” (3.500”)
Drift Size 2.423”
Steel Grade L-‐80 Nominal Weight
15.8 lbs/ft
Nominal Wall Thickness
0.476” Nominal ID 2.548”
Tubing Capacities Body Yield Strength
362,000 LBS 1611 KN
API Collapse 18,800 PSI 1296 BAR Internal Yield 19,040 PSI 1313 BAR Joint strength 362,000 LBS 1611 KN Connection Specifications Connection 3 ½” TSHW533 Compatible
With TSH503 TSH553 TSH563
OD 4.160” ID 2.498” Image Not To Scale
For Representation Only Connection Length Minimum
Standard 1 recut Type 2 2 recut
Connection Length Type 3 3 recut Minimum Make Up Torque
7,800
Ft/Lbs
10540 NM Optimum Make Up Torque
9,400 Ft/Lbs 12702 NM
Connection Make Up Loss Maximum Make Up Torque
11,800 Ft/Lbs 15946 NM 4.49”
Manufacturing Criteria Connection Tensile Efficiency
100% Inspection Criteria
API 5A5 API 5CT API 5CT
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy
of the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
41 Page 41
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
TUBING SPECIFICATION SHEET 3.500” X 15.8 lbs/ft TenarisHydril TSHW533
TenarisHydril
TSHW533 Integral Upset Tubing
Original Equipment Manufacturer
TenarisHydril Country of Origin
UK Romania Argentina
Nominal Tubing OD
3 ½” (3.500”)
Drift Size 2.423”
Steel Grade T-‐95 Nominal Weight
15.8 lbs/ft
Nominal Wall Thickness
0.476” Nominal ID 2.548”
Tubing Capacities Body Yield Strength
430,000 LBS 1914 KN
API Collapse 22,330 PSI 1540 BAR Internal Yield 22,610 PSI 1559 BAR Joint strength 430,000 LBS 1914 KN Connection Specifications Connection 3 ½” TSHW533 Compatible
With TSH503 TSH553 TSH563
OD 4.160” ID 2.498” Image Not To Scale
For Representation Only Connection Length Minimum
Standard 1 recut Type 2 2 recut
Connection Length Type 3 3 recut Minimum Make Up Torque
7,800
Ft/Lbs
10540 NM Optimum Make Up Torque
9,400 Ft/Lbs 12702 NM
Connection Make Up Loss Maximum Make Up Torque
11,800 Ft/Lbs 15946 NM 4.49”
Manufacturing Criteria Connection Tensile Efficiency
100% Inspection Criteria
API 5A5 API 5CT API 5CT
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy
of the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
42 Page 42
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
TUBING SPECIFICATION SHEET
3.500” X 15.8 lbs/ft TPS Techniseal TS-6
Original Equipment Manufacturer
TPS Techniseal Country of Origin
Germany
Nominal Tubing OD
3.500” Drift Size 2.423”
Steel Grade C-95SS Nominal Weight
15.8 lbs/ft
Nominal Wall Thickness
0.476” Nominal ID 2.548”
Tubing Capacities
Body Yield Strength
430,000 LBS 1914 KN
API Collapse 22,330 PSI 1540 BAR
Internal Yield 22,610 PSI 1559 BAR
Joint strength 456,000 LBS 2027 KN
Connection Specifications
Connection Techniseal TS-6 Compatible With
3 ½” PH6 3 ½” RTS-6 3 ½” BTS-6 3 ½” HITS-HD
OD 4.500” ID 2.485”
Image Not To Scale For Representation Only
Connection Length 3.87” Minimum
5.13” Standard 1 recut
6.39” Type 2 2 recut
Connection Length 7.65” Type 3 3 recut
Minimum Make Up Torque
6,400
Ft/Lbs
8680 NM
Optimum Make Up Torque
7,200 Ft/Lbs 9760 NM
Connection Make Up Loss Maximum Make Up Torque
8,000 Ft/Lbs 10850 NM
3.34”
Manufacturing Criteria Connection Tensile Efficiency
100% Inspection Criteria
API 5A5 API 5CT API 5CT
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy
of the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
43 Page 43
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
TUBING SPECIFICATION SHEET 4.500” X 15.5 lbs/ft TenarisHydril TSHW533
TenarisHydril
TSHW533 Integral Upset Tubing
Original Equipment Manufacturer
TenarisHydril Country of Origin
Indonesia
Nominal Tubing OD
4 ½” (4.500”)
Drift Size 3.701”
Steel Grade L-‐80 Nominal Weight
15.5 lbs/ft
Nominal Wall Thickness
0.337” Nominal ID 3.826”
Tubing Capacities Body Yield Strength
353,000 LBS 1570 KN
API Collapse 11,080 PSI 764 BAR Internal Yield 10,480 PSI 722 BAR Joint strength 353,000 LBS 1570 KN Connection Specifications Connection 4 ½” TSHW533 Compatible
With TSH503 TSH553 TSH563
OD 4.992” ID 3.776” Image Not To Scale
For Representation Only Connection Length Minimum
Standard 1 recut Type 2 2 recut
Connection Length Type 3 3 recut Minimum Make Up Torque
5,800
Ft/Lbs
7838 NM Optimum Make Up Torque
7,000 Ft/Lbs 9459 NM
Connection Make Up Loss Maximum Make Up Torque
10,200 Ft/Lbs 13784 NM 4.09”
Manufacturing Criteria Connection Tensile Efficiency
100% Inspection Criteria
API 5A5 API 5CT API 5CT
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy
of the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
44 Page 44
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
TUBING SPECIFICATION SHEET 4.500” X 15.50 lbs/ft TPS Multiseal TS-6
TPS TECHNITUBE
Rohrenwerke GMBH
Original Equipment Manufacturer
TPS Technitube Country of Origin
Germany
Nominal Tubing OD
4.500” Drift Size 3.701”
Steel Grade L-‐80 Nominal Weight
15.50 lbs/ft
Nominal Wall Thickness
0.337” Nominal ID 3.091”
Tubing Capacities Body Yield Strength
353,000 LBS 1570 KN
API Collapse 11,080 PSI 764 BAR Internal Yield 10,400 PSI 723 BAR Joint strength 378,000 LBS 1681 KN Connection Specifications Connection TPS MULTISEAL
TS-‐6 Compatible With
4 ½” PH6 4 ½” RTS-‐6 4 ½” BTS-‐6 4 ½” HITS-‐HD
OD 5.125” ID 3.765” Image Not To Scale
For Representation Only Connection Length 3.72” Minimum
4.97” Standard 1 recut 6.23” Type 2 2 recut
Connection Length 7.49” Type 3 3 recut (LP – Length Pin) Minimum Make
Up Torque 6,000
Ft/Lbs
8130 NM (LB – Length Box)
LB Minimum = LP – 0.38”
Optimum Make Up Torque
6,750 Ft/Lbs 9150 NM
Connection Make Up Loss Maximum Make Up Torque
7,500 Ft/Lbs 10170 NM 3.34”
Manufacturing Criteria Connection Tensile Efficiency
107% Inspection Criteria
API 5A5 API 5CT API 5CT
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy
of the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
45 Page 45
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
TUBING SPECIFICATION SHEET 4.500” X 15.50 lbs/ft TPS Multiseal TS-6
TPS TECHNITUBE
Rohrenwerke GMBH
Original Equipment Manufacturer
TPS Technitube Country of Origin
Germany
Nominal Tubing OD
4.500” Drift Size 3.701”
Steel Grade C95SS Nominal Weight
15.50 lbs/ft
Nominal Wall Thickness
0.337” Nominal ID 3.091”
Tubing Capacities Body Yield Strength
419,000 LBS 1864 KN
API Collapse 12,450 PSI 879 BAR Internal Yield 12,750 PSI 858 BAR Joint strength 448,000 LBS 1994 KN Connection Specifications Connection TPS MULTISEAL
TS-‐6 Compatible With
4 ½” PH6 4 ½” RTS-‐6 4 ½” BTS-‐6 4 ½” HITS-‐HD
OD 5.125” ID 3.765” Image Not To Scale
For Representation Only Connection Length 3.72” Minimum
4.97” Standard 1 recut 6.23” Type 2 2 recut
Connection Length 7.49” Type 3 3 recut (LP – Length Pin) Minimum Make
Up Torque 6,900
Ft/Lbs
9360 NM (LB – Length Box)
LB Minimum = LP – 0.38”
Optimum Make Up Torque
7,760 Ft/Lbs 10520 NM
Connection Make Up Loss Maximum Make Up Torque
8,630 Ft/Lbs 11700 NM 3.34”
Manufacturing Criteria Connection Tensile Efficiency
107% Inspection Criteria
API 5A5 API 5CT API 5CT
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy
of the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
46 Page 46
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
TUBING SPECIFICATION SHEET 4.500” X 24.0 lbs/ft TenarisHydril PH4
TenarisHydril
PH4 Integral Upset Tubing
Original Equipment Manufacturer
TenarisHydril Country of Origin
USA
Nominal Tubing OD
4.500” Drift Size 3.255”
Steel Grade C-‐95 Nominal Weight
24.0 lbs/ft
Nominal Wall Thickness
0.560” Nominal ID 3.380”
Tubing Capacities Body Yield Strength
659,000 LBS 2933 KN
API Collapse 20,700 PSI 1428 BAR Internal Yield 20,690 PSI 1426 BAR Joint strength 659,000 LBS 2933 KN Connection Specifications Connection TenarisHydril
PH-‐4 Compatible With
OD 5.563” ID 3.300”
Image Not To Scale For Representation Only
Connection Length Minimum Standard 1 recut Type 2 2 recut
Connection Length Type 3 3 recut Minimum Make Up Torque
11,800
Ft/Lbs
15946 NM
Optimum Make Up Torque
13,300 Ft/Lbs 17973 NM
Connection Make Up Loss Maximum Make Up Torque
14,800 Ft/Lbs 20000 NM 4.76”
Manufacturing Criteria Connection Tensile Efficiency
100% Inspection Criteria
API 5A5 API 5CT API 5CT
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy
of the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
47 Page 47
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
TUBING SPECIFICATION SHEET 2.375” X 4.60 lbs/ft TenarisHydril TSHW511
TenarisHydril
TSHW511 Flush Joint Tubing
Original Equipment Manufacturer
TenarisHydril Country of Origin
UK Romania Argentina
Nominal Tubing OD
2 3/8” (2.375”)
Drift Size 1.901”
Steel Grade L-‐80 Nominal Weight
4.60 lbs/ft
Nominal Wall Thickness
0.190” Nominal ID 1.995”
Tubing Capacities Body Yield Strength
104,000 LBS 463 KN
API Collapse 11,780 PSI 812 BAR Internal Yield 11,200 PSI 772 BAR Joint strength 62,000 LBS Connection Specifications Connection 2 3/8”
TSHW511 Compatible With
OD 2.406” ID 1.930” Image Not To Scale
For Representation Only Connection Length Minimum
Standard 1 recut Type 2 2 recut
Connection Length Type 3 3 recut Minimum Make Up Torque
550
Ft/Lbs
730 NM Optimum Make Up Torque
600 Ft/Lbs 810 NM
Connection Make Up Loss Maximum Make Up Torque
1,000 Ft/Lbs 1,351 NM 2.27”
Manufacturing Criteria Connection Tensile Efficiency
59.9% Inspection Criteria
API 5A5 API 5CT API 5CT
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy
of the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
48 Page 48
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
TUBING SPECIFICATION SHEET 2.375” X 4.60 lbs/ft TenarisHydril TSHW511
TenarisHydril
TSHW511 Flush Joint Tubing
Original Equipment Manufacturer
TenarisHydril Country of Origin
UK Romania Argentina
Nominal Tubing OD
2 3/8” (2.375”)
Drift Size 1.901”
Steel Grade P-‐110 Nominal Weight
4.60 lbs/ft
Nominal Wall Thickness
0.190” Nominal ID 1.995”
Tubing Capacities Body Yield Strength
143,000 LBS 636 KN
API Collapse 16,130 PSI 1112 BAR Internal Yield 15,400 PSI 1062 BAR Joint strength 86,000 LBS Connection Specifications Connection 2 3/8”
TSHW511 Compatible With
OD 2.406” ID 1.930” Image Not To Scale
For Representation Only Connection Length Minimum
Standard 1 recut Type 2 2 recut
Connection Length Type 3 3 recut Minimum Make Up Torque
550
Ft/Lbs
730 NM Optimum Make Up Torque
600 Ft/Lbs 810 NM
Connection Make Up Loss Maximum Make Up Torque
1,000 Ft/Lbs 1,351 NM 2.27”
Manufacturing Criteria Connection Tensile Efficiency
59.9% Inspection Criteria
API 5A5 API 5CT API 5CT
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy
of the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
49 Page 49
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
TUBING SPECIFICATION SHEET 2.875” X6.40 lbs/ft TenarisHydril TSHW511
TenarisHydril
TSHW511 Flush Joint Tubing
Original Equipment Manufacturer
TenarisHydril Country of Origin
UK Romania Argentina
Nominal Tubing OD
2 7/8” (2.875”)
Drift Size 2.347”
Steel Grade L-‐80 Nominal Weight
6.40 lbs/ft
Nominal Wall Thickness
0.217” Nominal ID 2.441”
Tubing Capacities Body Yield Strength
145,000 LBS 645 KN
API Collapse 11,170 PSI 770 BAR Internal Yield 10,570 PSI 729 BAR Joint strength 80,000 LBS Connection Specifications Connection 2 7/8”
TSHW511 Compatible With
OD 2.875” ID 2.377” Image Not To Scale
For Representation Only Connection Length Minimum
Standard 1 recut Type 2 2 recut
Connection Length Type 3 3 recut Minimum Make Up Torque
700
Ft/Lbs
946 NM Optimum Make Up Torque
800 Ft/Lbs 1080 NM
Connection Make Up Loss Maximum Make Up Torque
1,200 Ft/Lbs 1622 NM 2.27”
Manufacturing Criteria Connection Tensile Efficiency
55% Inspection Criteria
API 5A5 API 5CT API 5CT
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy
of the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
50 Page 50
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
TUBING SPECIFICATION SHEET 2.875” X6.40 lbs/ft TenarisHydril TSHW511
TenarisHydril
TSHW511 Flush Joint Tubing
Original Equipment Manufacturer
TenarisHydril Country of Origin
UK Romania Argentina
Nominal Tubing OD
2 7/8” (2.875”)
Drift Size 2.347”
Steel Grade P-‐110 Nominal Weight
6.40 lbs/ft
Nominal Wall Thickness
0.217” Nominal ID 2.441”
Tubing Capacities Body Yield Strength
199,000 LBS 886 KN
API Collapse 14,550 PSI 1003 BAR Internal Yield 14,530 PSI 1002 BAR Joint strength 110,000 LBS Connection Specifications Connection 2 7/8”
TSHW511 Compatible With
OD 2.875” ID 2.377” Image Not To Scale
For Representation Only Connection Length Minimum
Standard 1 recut Type 2 2 recut
Connection Length Type 3 3 recut Minimum Make Up Torque
700
Ft/Lbs
946 NM Optimum Make Up Torque
800 Ft/Lbs 1080 NM
Connection Make Up Loss Maximum Make Up Torque
1,200 Ft/Lbs 1622 NM 2.27”
Manufacturing Criteria Connection Tensile Efficiency
55% Inspection Criteria
API 5A5 API 5CT API 5CT
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy
of the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
51 Page 51
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
TUBING SPECIFICATION SHEET 3.500” X 9.20 lbs/ft TenarisHydril TSHW511
TenarisHydril
TSHW511 Flush Joint Tubing
Original Equipment Manufacturer
TenarisHydril Country of Origin
UK Romania Argentina
Nominal Tubing OD
3 ½” (3.500”)
Drift Size 2.867”
Steel Grade L-‐80 Nominal Weight
9.20 lbs/ft
Nominal Wall Thickness
0.254” Nominal ID 2.992”
Tubing Capacities Body Yield Strength
207,000 LBS 921 KN
API Collapse 10,540 PSI 727 BAR Internal Yield 10,160 PSI 700 BAR Joint strength 126,000 LBS Connection Specifications Connection 3 ½”
TSHW511 Compatible With
OD 2.875” ID 2.377” Image Not To Scale
For Representation Only Connection Length Minimum
Standard 1 recut Type 2 2 recut
Connection Length Type 3 3 recut Minimum Make Up Torque
1,200
Ft/Lbs
1622 NM Optimum Make Up Torque
1,400 Ft/Lbs 1892 NM
Connection Make Up Loss Maximum Make Up Torque
2,100 Ft/Lbs 2838 NM 2.740”
Manufacturing Criteria Connection Tensile Efficiency
60.9% Inspection Criteria
API 5A5 API 5CT API 5CT
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy
of the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
52 Page 52
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
TUBING SPECIFICATION SHEET 3.500” X 9.20 lbs/ft TenarisHydril TSHW511
TenarisHydril
TSHW511 Flush Joint Tubing
Original Equipment Manufacturer
TenarisHydril Country of Origin
UK Romania Argentina
Nominal Tubing OD
3 ½” (3.500”)
Drift Size 2.867”
Steel Grade P-‐110 Nominal Weight
9.20 lbs/ft
Nominal Wall Thickness
0.254” Nominal ID 2.992”
Tubing Capacities Body Yield Strength
285,000 LBS 1268 KN
API Collapse 13,530 PSI 933 BAR Internal Yield 13,970 PSI 963 BAR Joint strength 174,000 LBS Connection Specifications Connection 3 ½”
TSHW511 Compatible With
OD 2.875” ID 2.377” Image Not To Scale
For Representation Only Connection Length Minimum
Standard 1 recut Type 2 2 recut
Connection Length Type 3 3 recut Minimum Make Up Torque
1,200
Ft/Lbs
1622 NM Optimum Make Up Torque
1,400 Ft/Lbs 1892 NM
Connection Make Up Loss Maximum Make Up Torque
2,100 Ft/Lbs 2838 NM 2.740”
Manufacturing Criteria Connection Tensile Efficiency
60.9% Inspection Criteria
API 5A5 API 5CT API 5CT
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy
of the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
53 Page 53
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
TUBING SPECIFICATION SHEET 4.000” X 9.50 lbs/ft TenarisHydril TSHW511
TenarisHydril
TSHW511 Flush Joint Tubing
Original Equipment Manufacturer
TenarisHydril Country of Origin
UK Romania Argentina
Nominal Tubing OD
4” (4.00”)
Drift Size 3.423”
Steel Grade L-‐80 Nominal Weight
9.50 lbs/ft
Nominal Wall Thickness
0.226” Nominal ID 3.548”
Tubing Capacities Body Yield Strength
214,000 LBS 952 KN
API Collapse 6,590 PSI 470 BAR Internal Yield 7,910 PSI 545 BAR Joint strength 132,000 LBS 588 KN Connection Specifications Connection 4” TSHW511 Compatible
With
OD 4.000” ID 3.454” Image Not To Scale
For Representation Only Connection Length Minimum
Standard 1 recut Type 2 2 recut
Connection Length Type 3 3 recut Minimum Make Up Torque
1,300
Ft/Lbs
1757 NM Optimum Make Up Torque
1,600 Ft/Lbs 2162 NM
Connection Make Up Loss Maximum Make Up Torque
2,100 Ft/Lbs 2838 NM 2.740”
Manufacturing Criteria Connection Tensile Efficiency
61.8% Inspection Criteria
API 5A5 API 5CT API 5CT
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy
of the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
54 Page 54
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
TUBING SPECIFICATION SHEET 4.000” X 9.50 lbs/ft TenarisHydril TSHW511
TenarisHydril
TSHW511 Flush Joint Tubing
Original Equipment Manufacturer
TenarisHydril Country of Origin
UK Romania Argentina
Nominal Tubing OD
4” (4.00”)
Drift Size 3.423”
Steel Grade P-‐110 Nominal Weight
9.50 lbs/ft
Nominal Wall Thickness
0.226” Nominal ID 3.548”
Tubing Capacities Body Yield Strength
295,000 LBS 1313 KN
API Collapse 7,910 PSI 545 BAR Internal Yield 10,880 PSI 750 BAR Joint strength 182,000 LBS 810 KN Connection Specifications Connection 4” TSHW511 Compatible
With
OD 4.000” ID 3.454” Image Not To Scale
For Representation Only Connection Length Minimum
Standard 1 recut Type 2 2 recut
Connection Length Type 3 3 recut Minimum Make Up Torque
1,300
Ft/Lbs
1757 NM Optimum Make Up Torque
1,600 Ft/Lbs 2162 NM
Connection Make Up Loss Maximum Make Up Torque
2,100 Ft/Lbs 2838 NM 2.740”
Manufacturing Criteria Connection Tensile Efficiency
61.8% Inspection Criteria
API 5A5 API 5CT API 5CT
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy
of the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
55 Page 55
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
TUBING SPECIFICATION SHEET 4.000” X 11.6 lbs/ft TenarisHydril TSHW511
TenarisHydril
TSHW511 Flush Joint Tubing
Original Equipment Manufacturer
TenarisHydril Country of Origin
UK Romania Argentina
Nominal Tubing OD
4” (4.00”)
Drift Size 3.303”
Steel Grade P-‐110 Nominal Weight
11.6 lbs/ft
Nominal Wall Thickness
0.226” Nominal ID 3.548”
Tubing Capacities Body Yield Strength
367,000 LBS 1633 KN
API Collapse 13,160 PSI 907 BAR Internal Yield 13,760 PSI 948 BAR Joint strength 224,000 LBS 996 KN Connection Specifications Connection 4” TSHW511 Compatible
With
OD 4.000” ID 3.334” Image Not To Scale
For Representation Only Connection Length Minimum
Standard 1 recut Type 2 2 recut
Connection Length Type 3 3 recut Minimum Make Up Torque
1,700
Ft/Lbs
2297 NM Optimum Make Up Torque
2,000 Ft/Lbs 2702 NM
Connection Make Up Loss Maximum Make Up Torque
3,000 Ft/Lbs 4054 NM 2.740”
Manufacturing Criteria Connection Tensile Efficiency
61.0% Inspection Criteria
API 5A5 API 5CT API 5CT
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy
of the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
56 Page 56
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
TUBING SPECIFICATION SHEET 5.000” X 18.0 lbs/ft TenarisHydril TSHW511
TenarisHydril
TSHW511 Flush Joint Tubing
Original Equipment Manufacturer
TenarisHydril Country of Origin
UK Romania Argentina
Nominal Tubing OD
5” (5.00”)
Drift Size 4.151”
Steel Grade L-‐80 Nominal Weight
18.0 lbs/ft
Nominal Wall Thickness
0.362” Nominal ID 4.276”
Tubing Capacities Body Yield Strength
422,000 LBS 1878 KN
API Collapse 10,500 PSI 724 BAR Internal Yield 10,140 PSI 699 BAR Joint strength 265,000 LBS 1179 KN Connection Specifications Connection 5” TSHW511 Compatible
With
OD 5.000” ID 4.185” Image Not To Scale
For Representation Only Connection Length Minimum
Standard 1 recut Type 2 2 recut
Connection Length Type 3 3 recut Minimum Make Up Torque
3,500
Ft/Lbs
4730 NM Optimum Make Up Torque
4,200 Ft/Lbs 5676 NM
Connection Make Up Loss Maximum Make Up Torque
6,100 Ft/Lbs 8243 NM 3.620”
Manufacturing Criteria Connection Tensile Efficiency
62.8% Inspection Criteria
API 5A5 API 5CT API 5CT
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy
of the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
57 Page 57
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
TUBING SPECIFICATION SHEET 5.000” X 18.0 lbs/ft TenarisHydril TSHW521
TenarisHydril
TSHW521
Integral Semi Flush Joint Tubing
Original Equipment Manufacturer
TenarisHydril Country of Origin
UK Romania Argentina
Nominal Tubing OD
5” (5.00”)
Drift Size 4.151”
Steel Grade Q-‐125 Nominal Weight
18.0 lbs/ft
Nominal Wall Thickness
0.362” Nominal ID 4.276”
Tubing Capacities Body Yield Strength
659,000 LBS 2933 KN
API Collapse 14,820 PSI 1022 BAR Internal Yield 15,840 PSI 1092 BAR Joint strength 486,000 LBS 2162 KN Connection Specifications Connection 5” TSHW521 Compatible
With
OD 5.359” ID 4.226”
Image Not To Scale For Representation Only
Connection Length Minimum Standard 1 recut Type 2 2 recut
Connection Length Type 3 3 recut Minimum Make Up Torque
6,100 Ft/Lbs 8243 NM Optimum Make Up Torque
7,300 Ft/Lbs 9865 NM
Connection Make Up Loss Maximum Make Up Torque
10,700 Ft/Lbs 14459 NM 3.620”
Manufacturing Criteria Connection Tensile Efficiency
73.8% Inspection Criteria
API 5A5 API 5CT API 5CT
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy
of the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
58 Page 58
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
IMSF48 Rev1 1st July 2012
NON MAGNETIC DRILL COLLAR SPECIFICATION SHEET 4.750” NC38 SLICK COLLAR
Non MAG Drill Collar
Original Equipment Manufacturer
Schoeller Bleckmann
Country of Origin
Austria
Nominal OD 4 ¾” (4.750”)
Nominal ID 2 11/16” (2.6875”)
Material Grade P530 Grain Size ASTM
Magnetic Permeability
1.001 max. Drift Size 2 9/16” (2.5625”)
Drill Collar Capacities Tensile Strength
120,000 Psi Minimum 827 Mpa
Yield Strength
110,000 Psi Minimum 758 Mpa
Impact Strength
Above 60J Ft / Lbs Charpy V Notch
Hardness (Brinell)
Minimum 285 BHN
Tool Joint / Connection Specifications Connection NC38 OD 4 ¾”
(4.750”) ID 2 11/16”
(2.6875”) Image Not To Scale
For Representation Only Adjusted Weight Average Length 31.00 ft Tensile Strength 587,300 Lbs Torsional
Strength 18,100 Ft-‐Lbs
Hardbanding Recommended Make Up Torque
9,700 Ft-‐Lbs IPC None
Chemical Properties Maximum Make Up Torque
Ft-‐Lbs
Phosphorous Elongation 18 % Sulphur <0.030%
Average Weight Per Joint Fluid Displacement Fluid Capacity
Manufacturing Criteria Slip Recess N/A Inspection Criteria
NS-‐2 API Spec 7-‐1 Elevator Recess N/A
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy
of the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
59 Page 59
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
IMSF48 Rev1 1st July 2012
NON MAGNETIC DRILL COLLAR SPECIFICATION SHEET 6.750” NC50 SLICK COLLAR
Non MAG Drill Collar
Original Equipment Manufacturer
Schoeller Bleckmann
Country of Origin
Austria
Nominal OD 6 ¾” (6.750”)
Nominal ID 3 ¼” (3.250”)
Material Grade P530 Grain Size ASTM
Magnetic Permeability
1.001 max. Drift Size 3 1/8” (3.125”)
Drill Collar Capacities Tensile Strength
120,000 Psi Minimum 827 Mpa
Yield Strength
110,000 Psi Minimum 758 Mpa
Impact Strength
Above 60J
Hardness (Brinell)
Minimum 285 BHN
Tool Joint / Connection Specifications Connection
NC50
OD 6 ¾” (6.750”)
ID 3 ¼” (3.250”)
Image Not To Scale For Representation Only
Adjusted Weight Average Length 31.00 ft Recommended Make Up Torque
Ft-‐Lbs
Hardbanding None Maximum Make Up Torque
Ft-‐Lbs IPC None
Chemical Properties Phosphorous <0.05% Elongation 18 % Sulphur <0.030%
Average Weight Per Joint Fluid Displacement Fluid Capacity
Manufacturing Criteria Slip Recess N/A Inspection Criteria
NS-‐2 API Spec 7-‐1 Elevator Recess N/A
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy
of the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
60 Page 60
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
IMSF48 Rev1 1st July 2012
NON MAGNETIC DRILL COLLAR SPECIFICATION SHEET 8.000” 6-5/8” REG DRILL COLLAR
Non MAG Drill Collar
Original Equipment Manufacturer
Schoeller Bleckmann
Country of Origin
Austria
Nominal OD 8” (8.000”)
Nominal ID 2 13/16” (2.8125”)
Material Grade P530 Grain Size ASTM
Magnetic Permeability
1.001 max. Drift Size 3 11/16” (3.6875”)
Drill Collar Capacities Tensile Strength
110,000 Psi Minimum 758 Mpa
Yield Strength
100,000 Psi Minimum 689 Mpa
Impact Strength
Above 60J
Hardness (Brinell)
Minimum 285 BHN
Tool Joint / Connection Specifications Connection 6 5/8” REG OD 8”
(8.000”) ID 2 13/16”
(2.8125”) Image Not To Scale
For Representation Only Adjusted Weight Average Length 31.00 ft Recommended Make Up Torque
Ft-‐Lbs
Hardbanding None Maximum Make Up Torque
Ft-‐Lbs IPC None
Chemical Properties Phosphorous <0.05% Elongation 20 % Sulphur <0.030%
Average Weight Per Joint Fluid Displacement Fluid Capacity
Manufacturing Criteria Slip Recess N/A Inspection Criteria
NS-‐2 API Spec 7-‐1 Elevator Recess N/A
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy
of the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
61 Page 61
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
IMSF48 Rev1 1st July 2012
NON MAGNETIC DRILL COLLAR SPECIFICATION SHEET 8.250” 6-5/8” REG DRILL COLLAR
Non MAG Drill Collar
Original Equipment Manufacturer
Schoeller Bleckmann
Country of Origin
Austria
Nominal OD 8 ¼” (8.250”)
Nominal ID 3 ½” (3.500”)
Material Grade P530 Grain Size ASTM
Magnetic Permeability
1.001 max. Drift Size 3 3/8” (3.325”)
Drill Collar Capacities Tensile Strength
110,000 Psi Minimum 758 Mpa
Yield Strength
100,000 Psi Minimum 689 Mpa
Impact Strength
Above 60J
Hardness (Brinell)
Minimum 285 BHN
Tool Joint / Connection Specifications Connection 6 5/8” REG OD 8 ¼”
(8.000”) ID 3 ½”
(3.500”) Image Not To Scale
For Representation Only Adjusted Weight Average Length 31.00 ft Recommended Make Up Torque
Ft-‐Lbs
Hardbanding None Maximum Make Up Torque
Ft-‐Lbs IPC None
Chemical Properties Phosphorous <0.05% Elongation 20 % Sulphur <0.030%
Average Weight Per Joint Fluid Displacement Fluid Capacity
Manufacturing Criteria Slip Recess N/A Inspection Criteria
NS-‐2 API Spec 7-‐1 Elevator Recess N/A
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy
of the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
62 Page 62
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
IMSF48 Rev1 1st July 2012
NON MAGNETIC DRILL COLLAR SPECIFICATION SHEET 9.500” 7-5/8” REG DRILL COLLAR
Non MAG Drill Collar
Original Equipment Manufacturer
Schoeller Bleckmann
Country of Origin
Austria
Nominal OD 9 ½” (9.500”)
Nominal ID 3” (3.000”)
Material Grade P530 Grain Size ASTM
Magnetic Permeability
1.001 max. Drift Size 2 7/8” (2.875”)
Drill Collar Capacities Tensile Strength
110,000 Psi Minimum 758 Mpa
Yield Strength
100,000 Psi Minimum 689 Mpa
Impact Strength
Above 60J
Hardness (Brinell)
Minimum 285 BHN
Tool Joint / Connection Specifications Connection 7 5/8” REG OD 9 ½”
(9.500”) ID 3”
(3.000”) Image Not To Scale
For Representation Only Adjusted Weight Average Length 31.00 ft Recommended Make Up Torque
Ft-‐Lbs
Hardbanding None Maximum Make Up Torque
Ft-‐Lbs IPC None
Chemical Properties Phosphorous <0.05% Elongation 20 % Sulphur <0.030%
Average Weight Per Joint Fluid Displacement Fluid Capacity
Manufacturing Criteria Slip Recess N/A Inspection Criteria
NS-‐2 API Spec 7-‐1 Elevator Recess N/A
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy
of the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
63 Page 63
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
IMSF48 Rev1 1st July 2012
NON MAGNETIC DRILL COLLAR SPECIFICATION SHEET 9.500” 7-5/8” REG DRILL COLLAR
Non MAG Drill Collar
Original Equipment Manufacturer
Schoeller Bleckmann
Country of Origin
Austria
Nominal OD 9 ½” (9.500”)
Nominal ID 3 1/32” (3.031”)
Material Grade P530 Grain Size ASTM
Magnetic Permeability
1.001 max. Drift Size 2 29/32” (2.9063”)
Drill Collar Capacities Tensile Strength
110,000 Psi Minimum 758 Mpa
Yield Strength
100,000 Psi Minimum 689 Mpa
Impact Strength
Above 60J
Hardness (Brinell)
Minimum 285 BHN
Tool Joint / Connection Specifications Connection 7 5/8” REG OD 9 ½”
(9.500”) ID 3 1/32””
(3.031”) Image Not To Scale
For Representation Only Adjusted Weight Average Length 31.00 ft Recommended Make Up Torque
Ft-‐Lbs
Hardbanding None Maximum Make Up Torque
Ft-‐Lbs IPC None
Chemical Properties Phosphorous <0.05% Elongation 20 % Sulphur <0.030%
Average Weight Per Joint Fluid Displacement Fluid Capacity
Manufacturing Criteria Slip Recess N/A Inspection Criteria
NS-‐2 API Spec 7-‐1 Elevator Recess N/A
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy
of the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
64 Page 64
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
IMSF48 Rev1 1st July 2012
NON MAGNETIC DRILL COLLAR SPECIFICATION SHEET 9.500” 7-5/8” REG DRILL COLLAR
Non MAG Drill Collar
Original Equipment Manufacturer
Schoeller Bleckmann
Country of Origin
Austria
Nominal OD 9 ½” (9.500”)
Nominal ID 4” (4.000”)
Material Grade P530 Grain Size ASTM
Magnetic Permeability
1.001 max. Drift Size 3 3/8” (3.325”)
Drill Collar Capacities Tensile Strength
110,000 Psi Minimum 758 Mpa
Yield Strength
100,000 Psi Minimum 689 Mpa
Impact Strength
Above 60J
Hardness (Brinell)
Minimum 285 BHN
Tool Joint / Connection Specifications Connection 7 5/8” REG OD 9 ½”
(9.500”) ID 4”
(4.000”) Image Not To Scale
For Representation Only Adjusted Weight Average Length 31.00 ft Recommended Make Up Torque
Ft-‐Lbs
Hardbanding None Maximum Make Up Torque
Ft-‐Lbs IPC None
Chemical Properties Phosphorous <0.05% Elongation 20 % Sulphur <0.030%
Average Weight Per Joint Fluid Displacement Fluid Capacity
Manufacturing Criteria Slip Recess N/A Inspection Criteria
NS-‐2 API Spec 7-‐1 Elevator Recess N/A
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy
of the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
65 Page 65
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
IMSF48 Rev1 1st July 2012
NON MAGNETIC DRILL COLLAR SPECIFICATION SHEET 6.750” NC50 SPIRAL COLLAR
Non MAG Spiral Drill Collar
Original Equipment Manufacturer
Schoeller Bleckmann
Country of Origin
Austria
Nominal OD 6 ¾” (6.750”)
Nominal ID 2 7/8” (2.875”)
Material Grade P530 Grain Size ASTM
Magnetic Permeability
1.001 max. Drift Size 3 1/8” (3.125”)
Drill Collar Capacities Tensile Strength 120,000 Psi Minimum
827 Mpa Yield Strength 110,000 Psi Minimum
758 Mpa Impact Strength
Above 60J
Hardness (Brinell)
Minimum 285 BHN
Tool Joint / Connection Specifications Connection
NC50
OD 6 ¾” (6.750”)
ID 2 7/8” (2.875”)
Image Not To Scale For Representation Only
Adjusted Weight Average Length 31.00 ft
Hardbanding None Recommended Make Up Torque
Ft-‐Lbs
IPC None Maximum Make Up Torque
Ft-‐Lbs Chemical Properties
Phosphorous <0.05% Elongation 18 % Sulphur <0.030% Fluid Displacement Fluid Capacity
Manufacturing Criteria Slip Recess N/A Inspection
Criteria NS-‐2
API Spec 7-‐1 Elevator Recess N/A
The information on this specification sheet is provided for illustration purposes only and is taken from information available
from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy of the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
66 Page 66
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
IMSF48 Rev1 1st July 2012
NON MAGNETIC DRILL COLLAR SPECIFICATION SHEET 8.250” 6-5/8” REG DRILL COLLAR
Non MAG Drill Collar
Original Equipment Manufacturer
Schoeller Bleckmann
Country of Origin
Austria
Nominal OD 8 ¼” (8.250”)
Nominal ID 2 13/16” (2.8125”)
Material Grade P530 Grain Size ASTM
Magnetic Permeability
1.001 max. Drift Size 2 11/16” (2.6875”)
Drill Collar Capacities Tensile Strength
100,000 Psi Minimum 689 Mpa
Yield Strength
110,000 Psi Minimum 758 Mpa
Impact Strength
Above 60J
Hardness (Brinell)
Minimum 285 BHN
Tool Joint / Connection Specifications Connection 6 5/8” REG OD 8 ¼”
(8.000”) ID 2 13/16”
(2.8125”) Image Not To Scale
For Representation Only Adjusted Weight Average Length 31.00 ft Recommended Make Up Torque
Ft-‐Lbs
Hardbanding Maximum Make Up Torque
Ft-‐Lbs IPC None
Chemical Properties Phosphorous <0.05% Elongation 20 % Sulphur <0.030%
Average Weight Per Joint Fluid Displacement Fluid Capacity
Manufacturing Criteria Slip Recess N/A Inspection Criteria
NS-‐2 API Spec 7-‐1 Elevator Recess N/A
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy
of the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
67 Page 67
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
IMSF48 Rev1 1st July 2012
NON MAGNETIC DRILL COLLAR SPECIFICATION SHEET 9.500” 7-5/8” REG DRILL COLLAR
Non MAG Drill Collar
Original Equipment Manufacturer
Schoeller Bleckmann
Country of Origin
Austria
Nominal OD 9 ½” (9.500”)
Nominal ID 3” (3.000”)
Material Grade P530 Grain Size ASTM
Magnetic Permeability
1.001 max. Drift Size 2 7/8” (2.875”)
Drill Collar Capacities Tensile Strength
110,00 Psi Minimum 758 Mpa
Yield Strength
100,00 Psi Minimum 689 Mpa
Impact Strength
Above 60J Ft / Lbs
Hardness (Brinell)
Minimum 285 BHN
Tool Joint / Connection Specifications Connection 7 5/8” REG OD 9 ½”
(9.500”) ID 3”
(3.000”) Image Not To Scale
For Representation Only Adjusted Weight Average Length 31.00 ft Recommended Make Up Torque
Ft-‐Lbs
Hardbanding None Maximum Make Up Torque
Ft-‐Lbs IPC None
Chemical Properties Phosphorous <0.05% Elongation 20 Sulphur <0.030%
Average Weight Per Joint Fluid Displacement Fluid Capacity
Manufacturing Criteria Slip Recess N/A Inspection Criteria
NS-‐2 API Spec 7-‐1 Elevator Recess N/A
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy
of the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
68 Page 68
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
IMSF48 Rev1 1st July 2012
NON MAGNETIC DRILL COLLAR SPECIFICATION SHEET 4.750” NC38 FLEXI COLLAR
Non MAG Flexi Collar
Original Equipment Manufacturer
Schoeller Bleckmann
Country of Origin
Austria
Nominal OD 4 ¾” (4.750”)
Nominal ID 2 11/16” (2.6875”)
Material Grade P530 Grain Size 3-‐5 ASTM
Magnetic Permeability
1.001 max. Drift Size 2 9/16” (2.5625”)
Drill Collar Capacities Tensile Strength
130.5 KSI 120 KSI Min
Yield Strength
121.4 KSI 110 KSI Min
Impact Strength
171 Ft / Lbs Charpy V Notch
Hardness (Brinell)
311 – 321 BHN
Tool Joint / Connection Specifications Connection NC38 OD 4 ¾”
(4.750”) ID 2 11/16”
(2.6875”)
Image Not To Scale For Representation Only
Adjusted Weight Average Length 31.00 ft Tensile Strength 587,300 Lbs Torsional
Strength 18,100 Ft-‐Lbs
Recommended Make Up Torque
9,700 Ft-‐Lbs
Hardbanding Maximum Make Up Torque
Ft-‐Lbs IPC None
Chemical Properties Phosphorous <0.05% Elongation 18 % Sulphur <0.030%
Average Weight Per Joint Fluid Displacement Fluid Capacity 0.360 gal / ft
Manufacturing Criteria Slip Recess N/A Inspection Criteria
NS-‐2 API Spec 7-‐1 Elevator Recess N/A
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy
of the information provided or for any error, omission or misstatement.
www.saltire-energy.com
69 Page 69
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
IMSF48 Rev1 1st July 2012
NON MAGNETIC DRILL COLLAR SPECIFICATION SHEET 6.500” NC50 FLEXI COLLAR
Non MAG Flexi Collar
Original Equipment Manufacturer
Schoeller Bleckmann
Country of Origin
Austria
Nominal OD 6 ½” (6.500”)
Nominal ID 3 ¼” (3.250”)
Material Grade P530 Grain Size 1-‐2 ASTM
Magnetic Permeability
1.001 max. Drift Size 3 1/8” (3.125”)
Drill Collar Capacities Tensile Strength
128.1 KSI 120 KSI Min
Yield Strength
119.2 KSI 110 KSI Min
Impact Strength
181 Ft / Lbs Charpy V Notch
Hardness (Brinell)
296 – 303 BHN
Tool Joint / Connection Specifications Connection NC50 OD 6 ½”
(6.500”) ID 3 ¼”
(3.250”)
Image Not To Scale For Representation Only
Adjusted Weight Average Length 31.00 ft Tensile Strength 560,800 Lbs Torsional
Strength 71,240 Ft-‐Lbs
Recommended Make Up Torque
26,700 Ft-‐Lbs
Hardbanding None Maximum Make Up Torque
Ft-‐Lbs IPC None
Chemical Properties Phosphorous <0.05% Elongation 18 % Sulphur <0.030%
Average Weight Per Joint Fluid Displacement Fluid Capacity 0.698 gal / ft
Manufacturing Criteria Slip Recess N/A Inspection Criteria
NS-‐2 API Spec 7-‐1 Elevator Recess N/A
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy
of the information provided or for any error, omission or misstatement.
www.saltire-energy.com
70 Page 70
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
IMSF48 Rev1 1st July 2012
NON MAGNETIC DRILL COLLAR SPECIFICATION SHEET 6.750” NC50 FLEXI COLLAR
Non MAG Flexi Collar
Original Equipment Manufacturer
Schoeller Bleckmann
Country of Origin
Austria
Nominal OD 6 ¾” (6.750”)
Nominal ID 3 ¼” (3.250”)
Material Grade P530 Grain Size 2-‐4 ASTM
Magnetic Permeability
1.001 max. Drift Size 3 1/8” (3.125”)
Drill Collar Capacities Tensile Strength
132.9 KSI 120 KSI Min
Yield Strength
123.7 KSI 110 KSI Min
Impact Strength
170 Ft / Lbs Charpy V Notch
Hardness (Brinell)
306 – 316 BHN
Tool Joint / Connection Specifications Connection
NC50
OD 6 ¾” (6.750”)
ID 3 ¼” (3.250”)
Image Not To Scale For Representation Only
Adjusted Weight Average Length 31.00 ft Recommended Make Up Torque
Ft-‐Lbs
Hardbanding None Maximum Make Up Torque
Ft-‐Lbs IPC None
Chemical Properties Phosphorous <0.05% Elongation 18 % Sulphur <0.030%
Average Weight Per Joint Fluid Displacement Fluid Capacity
Manufacturing Criteria Slip Recess N/A Inspection Criteria
NS-‐2 API Spec 7-‐1 Elevator Recess N/A
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy
of the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
71 Page 71
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
IMSF48 Rev1 1st July 2012
NON MAGNETIC DRILL COLLAR SPECIFICATION SHEET 8.000” 6-5/8” REG FLEXI COLLAR
Non MAG Flexi Collar
Original Equipment Manufacturer
Schoeller Bleckmann
Country of Origin
Austria
Nominal OD 8” (8.000”)
Nominal ID 3 ½” (3.500”)
Material Grade P530 Grain Size 3-‐4 ASTM
Magnetic Permeability
1.001 max. Drift Size 3 3/8” (3.325”)
Drill Collar Capacities Tensile Strength
130.5 KSI 120 KSI Min
Yield Strength
120.5 KSI 100 KSI Min
Impact Strength
146 Ft / Lbs Charpy V Notch
Hardness (Brinell)
298 – 302 BHN
Tool Joint / Connection Specifications Connection 6 5/8” REG OD 8”
(8.000”) ID 3 ½”
(3.500”)
Image Not To Scale For Representation Only
Adjusted Weight Average Length 31.00 ft Recommended Make Up Torque
Ft-‐Lbs
Hardbanding None Maximum Make Up Torque
Ft-‐Lbs IPC None
Chemical Properties Phosphorous <0.05% Elongation 20 % Sulphur <0.030%
Average Weight Per Joint Fluid Displacement Fluid Capacity
Manufacturing Criteria Slip Recess N/A Inspection Criteria
NS-‐2 API Spec 7-‐1 Elevator Recess N/A
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy
of the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
72 Page 72
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
IMSF48 Rev1 1st July 2012
NON MAGNETIC DRILL COLLAR SPECIFICATION SHEET 8.250” 6-5/8” REG FLEXI COLLAR
Non MAG Flexi Collar
Original Equipment Manufacturer
Schoeller Bleckmann
Country of Origin
Austria
Nominal OD 8 ¼” (8.250”)
Nominal ID 3 ½” (3.500”)
Material Grade P530 Grain Size ASTM
Magnetic Permeability
1.001 max. Drift Size 3 3/8” (3.325”)
Drill Collar Capacities Tensile Strength
110,000 Psi Minimum 758 Mpa
Yield Strength
100,000 Psi Minimum 689 Mpa
Impact Strength
Above 60J Ft / Lbs
Hardness (Brinell)
Minimum 285 BHN
Tool Joint / Connection Specifications Connection 6 5/8” REG OD 8 ¼”
(8.000”) ID 3 ½”
(3.500”)
Image Not To Scale For Representation Only
Adjusted Weight Average Length 31.00 ft Recommended Make Up Torque
Ft-‐Lbs
Hardbanding None Maximum Make Up Torque
Ft-‐Lbs IPC None
Chemical Properties Phosphorous <0.05% Elongation 20 % Sulphur <0.030%
Average Weight Per Joint Fluid Displacement Fluid Capacity
Manufacturing Criteria Slip Recess N/A Inspection Criteria
NS-‐2 API Spec 7-‐1 Elevator Recess N/A
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy
of the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
73 Page 73
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
SPECIFICATION SHEET Koomey Control Unit
Model 5 Function Electrics Koomey Control Unit Details
Approximate Height of Unit
99” Approximate Width of Unit
57“
Approximate Length of Unit
72” Approximate Weight of Unit
3600Ibs
Capacity
8 x 11 USG Functions 5
Pumps 2x Air Certification DNV
Image Not To Scale For Representation Only
Saltire Pressure Control Ltd Workshop Badentoy Road, Badentoy Park, Portlethen, Aberdeen AB12 4YA
TEL: +44 (0) 1224 782211 E-‐Mail: enquiries@saltire-‐energy.com
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy of
the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
74 Page 74
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
SPECIFICATION SHEET HT 14:200 Torque System
AMC Engineering
HT 14:200 Torque System
Original Equipment Manufacturer
AMC Engineering Limited
Country of Origin
UK
Fixed Headstock Capacity
2-‐3/8” Minimum
14” Maximum
Travelling Tailstock Capacity
2-‐3/8” Minimum
14” Maximum
Tailstock has a Top Open Option available for easy loading of tools
into the machine
Torque Capacities Maximum Make Up Torque
160,000 Ft-‐Lbs
Maximum Break Out Torque
200,000 Ft-‐Lbs
Self-‐Centering Cylinders for Safe Centering of Tools
Torque Unit Details
Image Not To Scale
For Representation Only
Approximate Length of Unit
12 feet
Approximate Width of Unit
6 Approximate Height of Unit
8
Operators Approximate Total Weight of Unit
6 Tonne Trained Personnel Craneage / Handling Capacity of Workshop
Operating Working Pressure
3000 PSI
20 Tonne Certification
No Changing of Jaws Required
Torque Chart Print Out
Torque Facilities offered at Saltire Pressure Control Ltd Workshop Badentoy Road, Badentoy Park, Portlethen, Aberdeen AB12 4YA
TEL: +44 (0) 1224 782211 E-‐Mail: enquiries@saltire-‐energy.com
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy
of the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
75 Page 75