3M Coating

  • Published on
    22-Sep-2014

  • View
    170

  • Download
    6

Embed Size (px)

Transcript

<p>Corrosion Protection ProductsProduct Catalogue</p> <p>Industrial, ConstructionCopon and Thortex have been rebranded to form part of the Scotchkote range of products from 3M.</p> <p>&amp; Engineering Solutions</p> <p>(10009)CPP_Ind&amp;Eng_Prod_cat.indd 1</p> <p>3/4/09 09:53:45</p> <p>Mechanical RepairEngineering Repair Rebuilding and Protection Guide Available as (includes Tech Sheets and Spatulas) Colour Mixing Ratio V/V Base to Activator Usable Life (20C) Cure Time Initial Set (20C) Theoretical Coverage Rate Volume Capacity per Unit</p> <p>CERAMIC REPAIR SYSTEMS - Polyceramic rebuilding and resurfacing compounds for components subject to erosion and corrosion damageScotchkote Epoxy Ceramic Rebuild EG 513 (Formerly Thortex Cerami-Tech EG) Engineering Grade Erosion/Corrosion Protection System Scotchkote Epoxy Ceramic Surfacer FG 512 (Formerly Thortex Cerami-Tech FG) Fluid Grade Erosion/Corrosion Protection System Scotchkote Epoxy Ceramic HD Surfacer HG 519 (Formerly Thortex Cerami-Tech HG) High Abrasion Resistant Protection System Scotchkote Epoxy Ceramic Surfacer CR 511 (Formerly Thortex Cerami-Tech CR) Smooth Low Friction Protection System Scotchkote Epoxy HT Lining HTX 517 (Formerly Thortex Cerami-Tech HTX) High Temperature Corrosion Protection System Scotchkote Urethane Ceramic Lining FG 514 (Formerly Thortex Cerami-Flex FG) Thixotropic Cavitation Resistant System Scotchkote Urethane Ceramic Rebuild EG 515 (Formerly Thortex Cerami-Flex EG) Brushable Grade Flexible Ceramic System Repairing erosion/corrosion damage on: condenser tube sheets, valve bodies, impellers, pump casings, valve discs, pipe bends, flanges, condenser end plates, tank outlets/inlets, dissimilar metals. Prevent erosion/corrosion damage on: pipe bends elbows, pump impellers, casings, valve discs and bodies, condenser boxes, condenser tube sheets, tank surfaces. Abrasion resistant heavy duty lining material for heavy wear situations, pipes, hoppers chutes, pumps, valves, tanks. 100% solids coating designed to offer a smooth low friction finish for pumps, water boxes, condensers, valves, impellers etc. approved by W.R.A.S. for contact with potable water. Prevention of corrosion for high temperature immersion. Ideal for oil/water separators etc. For use with Cerami-Flex E.G. on all areas where cavitation attack occurs. Normally applied by brush to provide a smooth cavitation resistant lining. For rebuilding metal surfaces subject to severe erosion and cavitations attack. Designed for use on pumps, impellers, propellers, turbine blades etc. 4 x 2kg units 12 x 2kg units 4 x 1kg units 4 x 3kg units 4 x 1.5kg units 1 x 5kg units 2 x 1kg units 1 x 3kg units 4 x 800 g units 1 x 3kg units 4 x1kg units 4 x1kg units grey or blue red, grey, blue light grey, off-white blue, mid-grey, red 3:1 3:1 3:1 2:1 4:1 3:1 3:1 25 mins 25 mins 60 mins 45 mins 45 mins 20 mins 20 mins 60 mins 60 mins 3 hours 6 hours 6 hours 2 hours 2 hours 1.76 sq m per kg at 250 microns (10 mils) dft 2.5 sq m per kg at 250 microns (10 mils) dft 1.04 sq m per kg at 750 microns (30 mils) dft 0.8 sq m per kg at 1 mm dft 0.8 sq m per kg at 1 mm dft 834 cc 440 cc 1320 cc 813 cc 2710 cc 600 cc 2250 cc 835 cc 835 cc</p> <p>METAL REPAIR SYSTEMS - The ultimate choice for engineering repairs to all types of mechanical equipmentScotchkote Urethane Metal Repair RG 501 (Formerly Thortex Metal-Tech RG) Rapid Grade Metal Repair System Scotchkote Epoxy Metal Repair EG 503 (Formerly Thortex Metal-Tech EG) Engineering Grade Metal Rebuilding System Scotchkote Epoxy Metal Surfacer FG 502 (Formerly Thortex Metal-Tech FG) Fluid Grade Metal Resurfacing System Scotchkote Epoxy Metal Repair XG 509 (Formerly Thortex Metal-Tech XG) Extended Life Metal Rebuilding System Scotchkote Epoxy Metal Repair SG 527 (Formerly Thortex Metal-Tech SG) Simple Stick Grade Metal Rebuilding System Scotchkote Urethane Pipe Repair PR 504 (Formerly Thortex Metal-Tech PR) Scotchkote TRK 19603 ThistleWrap Pipe Repair Tape Scotchkote TRK 19604 ThistleWrap Pipe Repair Tape Scotchkote TRK 19605 ThistleWrap Pipe Repair Tape Rapid repairs to: leaking pipes, radiators, tanks, fuel tanks, cracked batteries, dissimilar metals, stripped threads, sumps, casings, scored drams. Engineering, rebuilding and repairing: cracked engine blocks, worn or damaged shafts, bearing housings, flange faces, distorted base. Simple resurfacing of: battery cases, tank bases, joints and seams, casings. When used with non-slip grip prevents slip on: brake test rollers, metal straps, ramps, tank tops, platforms. Versatile repair and rebuilding system with extended working life after mixing. Simple metal repair product supplied in the form of a stick. Simply mix by hand for rapid repairs to pipes, tanks, sumps, casing etc. Simple to use, just soak in water, wrap around leak areas, seals pipes in minutes. Simple to use, just soak in water, wrap around leak areas. Seals leaking pipes in minutes Simple to use, just soak in water, wrap around leak areas. Seals leaking pipes in minutes. Simple to use, just soak in water, wrap around leak areas. Seals leaking pipes in minutes. 10 x 125g sachets 8 x 175g tubes 4 x 500g units 4 x 1kg units 4 x 2kg units 4 x 5kg units 12 x 1kg units 12 x 2kg units 1:1 3 mins 10 mins 70 cc 99 cc 205 cc 410 cc 820 cc 2050 cc 465 cc 1395 cc 1176 cc 66 cc n/a n/a n/a</p> <p>3:1</p> <p>25 mins</p> <p>60 mins</p> <p>4 x 1kg units 1 x 3kg units 4 x 3kg units 1 x 5kg units 10 x 150mm sticks (approx. 125g) 10 x 1.5m x 50mm 5 x 50 mm x 3.6 m 5 x 75 mm x 3.6 m 5 x 100 mm x 3.6 m</p> <p>2:1 1:1 n/a n/a n/a</p> <p>40 mins 60 mins 5 mins 2 - 3 mins 2 3 mins 2 3 mins 2 3 mins</p> <p>3 hours 4 hours 15 mins 5 mins 5 mins 5 mins 5 mins</p> <p>1.88 sq m per kg at 250 microns (10 mils) dft n/a n/a n/a</p> <p>RUBBER REPAIR SYSTEMS - Elastomeric systems providing effective long term repairs on any rubber surfaceScotchkote Urethane Elastomer 60FG 534 (Formerly Thortex Flexi-Tech 60 FG) Abrasion Resistant Grade Flexible Protection System 60 Durometer Scotchkote Urethane Elastomer 60EG 533 (Formerly Thortex Flexi-Tech 60 EG) Engineering Grade Flexible Repair Protection System 60 Durometer Scotchkote Urethane Elastomer 60RG 537 (Formerly Thortex Flexi-Tech 60 RG) Fast Curing Flexible Repair Protection System 60 Durometer Scotchkote Urethane Elastomer 75RG 530 (Formerly Thortex Flexi-Tech 75 RG) Fast Curing Flexible Repair Protection System 75 Durometer Scotchkote Urethane Elastomer 80FG 532 (Formerly Thortex Flexi-Tech 80 FG) Fluid Grade Flexible Casting and Moulding System 80 Durometer Scotchkote Urethane Elastomer 80EG 531 (Formerly Thortex Flexi-Tech 80 EG) Tough Abrasion Resistant Flexible Repair System 80 Durometer Scotchkote Urethane Elastomer 80BG 536 (Formerly Thortex Flexi-Tech 80 BG) Brushing Grade of Flexi-Tech 80 Durometer Durometer 60 grade designed for use with the paste grade to provide a smooth finish. Can also be used for expansion joints and as an abrasion resistant finish on steel. Durometer 60 grade paste providing flexible effective repairs to conveyor belts, gaskets, hoses, seals etc. Fast curing durometer 60 grade paste flexible repair material ideal for conveyor belts where time is of the essence. Durometer 75 fast curing flexible repair paste, ideal for all repairs to rubber surfaces where time is of the essence. Durometer 80 grade liquid designed for casting rubber components offers outstanding tear strength and abrasion resistance. Durometer 80 grade paste with excellent impact and abrasion resistance suitable for repairs to equipment operating in aggressive abrasive environments. Brushing grade of Flexi-Tech 80 B.G. for application to chutes, hoppers and impellers operating in aggressive abrasive environments. Includes primer 4 x 600g units Includes primer 4 x 600g units 1 x 3kg unit Includes primer 10 x 125g blister packs 4 x 600g units Includes primer 10 x 75g sachets Includes primer 4 x 600g units 1 x 2kg unit Includes primer 4 x 750g units Includes primer 4 x 600g units 1 x 2kg units 2:1 25 mins 3 hours 2.2 sq m per kg at 250 microns (10 mils) dft 555 cc 545 cc 2730 cc 112 cc 540 cc 70 cc 560 cc 1866 cc 645 cc 560 cc 1866 cc</p> <p>2:1</p> <p>25 mins</p> <p>3 hours</p> <p>2:1</p> <p>10 mins</p> <p>30 mins</p> <p>1:1</p> <p>3 - 5 mins</p> <p>30 mins</p> <p>1.08:1 3:2 1.17:2</p> <p>15 mins 12 mins 15 mins</p> <p>1 hour 4 hours 1 hour</p> <p> 1.9 sq m per kg at 500 microns (20 mils) dft</p> <p>1</p> <p>2</p> <p>(10009)CPP_Ind&amp;Eng_Prod_cat.indd 1-2</p> <p>3/4/09 09:53:45</p> <p>ConstructionUniversal Primer Systems Rebuilding and Protection Guide Unit Sizes Available Colour S = Single T = Twin WB = Water Based SB = Solvent Based SF = 100% solids Typical Dry Film Thickness microns (mils) Theoretical Coverage Rate Volume Solids %</p> <p>UNIVERSAL PRIMER SYSTEMS - General purpose primers for metal and concrete surfaces Single component waterborne coatingsScotchkote Acrylic Sealer BS 848 (Formerly Thortex Wall-Tech BS) Water Based Acrylic Sealer for Porous Surfaces Single component economical sealer for porous surfaces ideal for use with Wall-Tech C.S.M. 1 x 5 litre unit clear S WB 40 (1.6) 10 sq m per litre at 40 mm dft 40</p> <p>Two component waterborne coatingsScotchkote Epoxy Primer GP 830 (Formerly Thortex Uni-Tech GP Primer) Universal Wall and Floor Epoxy Primer Water based primer with outstanding adhesion to all mineral surfaces. 1 x 2.5 litre (3.5kg) unit 1 x 5 litre (7kg) unit 1 x 20 litre (30kg) unit off white matte T WB 40 (1.5) 11.25 sq m per litre at 40 microns (1.6 mils) dft 45</p> <p>Two component 100% solids coatingsScotchkote Epoxy Sealer SP 810 (Formerly Thortex Floor-Tech SP Primer) Epoxy 100% Solids Primer for Concrete Scotchkote Urethane Sealer SFU 854 (Formerly Thortex Floor-Tech SFU) 100% Solids Primer for Concrete and Porous Surfaces 100% solids floor primer which offers excellent adhesion to concrete surfaces. Can be used as a clear sealer or as a primer. Conductive grade also available. 1 x 2kg unit 1 x 5kg unit 1 x 20kg unit 1 x 5kg unit (conductive grade) Thixotropic grade available 1 x 3 litre (4kg) unit 1 x 15 litre unit (17kg) unit 100 (4) 200 (8) 9.6 sq m per kg at 100 microns (4 mils) dft 4.8 sq m per kg at 200 microns (8 mils) dft 10 sq m per litre at 100 microns (4 mils) dft</p> <p>T</p> <p>SF</p> <p>100</p> <p>Two component 100% solids primer/sealer for concrete surfaces</p> <p>T</p> <p>SF</p> <p>100 (4)</p> <p>100</p> <p>Single component solvent based coatingsScotchkote Urethane Primer FB 856 (Formerly Thortex Floor-Tech FB Primer) Single Component Polyurethane Floor Primer High performance primer for asphalt and concrete surfaces suitable as a dustproofing treatment for concrete. 1 x 5 litre unit 1 x 25 litre unit S SB 75 (3) 8.6 sq m per kg at 75 microns (3 mils) dft 65</p> <p>Two component solvent based coatingsScotchkote Epoxy Primer MC 145 (Formerly Thortex Uni-Tech MC Primer) All Purpose metal and Concrete Epoxy Primer Solvent based primer with excellent adhesion to all metals and cementitious substrates. Also suitable for GRP substrates. 1 x 5 litre (6.5kg) unit 1 x 20 litre (25.5lg) unit off white T SB 50 (2) 8.8 sq m per kg at 50 microns (2 mils) dft 45</p> <p>Concrete and Floor Protection</p> <p>Rebuilding and Protection Guide</p> <p>Unit Sizes Available</p> <p>Colour</p> <p>Mixing Ratio V/V Base to Activator</p> <p>Usable Life (20C)</p> <p>Cure Time Initial Set (20C)</p> <p>Theoretical Coverage Rate</p> <p>Volume Capacity per Unit</p> <p>CONCRETE REPAIR SYSTEMS - High performance repair products with outstanding adhesion to concrete and excellent abrasion and chemical resistanceScotchkote Epoxy Concrete Repair 474 (Formerly Thortex Grano-Tech) Universal Concrete Repair and Protection System Repairs, rebuilds and protects: spalled sills and lintels, concrete floors, quarry tiles, steps, ramps, loading bays, bund walls, from mild chemical attack. Includes primer 1 x 5kg unit 1 x 15kg unit Includes primer 1 x 5kg unit Includes primer 1 x 5kg unit 2 x 10kg units grey primer 2:1 Grano-Tech resins 2:1 primer 2:1 Wall-Tech L.W. resins 2:1 resins 2:1 variable primer 30 mins Grano-Tech 70 mins primer 30 mins Wall-Tech L.W. 70 mins 25 mins 20 mins primer 3 1/2 hours Grano-Tech 8 hours primer 3 1/2 hours Wall-Tech L.W. 3 1/2 hours 3 1/2 hours 20 mins variable 0.4 sq m at 6mm (5kg unit) 1.2 sq m at 6mm (15kg unit) 2250 cc 6750 cc</p> <p>Scotchkote Epoxy Concrete Mortar LW 405 (Formerly Thortex Wall-Tech LW) Lightweight Concrete Repair Mortar for Vertical and Overhead Surfaces Scotchkote Epoxy Concrete Repair PR 415 (Formerly Thortex Floor-Tech PR) Patch Repair System Scotchkote Waterproofing Compound CWC 423 (Formerly Thortex Wall-Tech CWC) Cementitious Waterproofing</p> <p>Lightweight system with excellent application properties for vertical and overhead surfaces. Provides a strong durable repair to any concrete or mineral surface. Fast setting self priming epoxy concrete repair system Polymer cement system which reacts with concrete and cement structures to provide a chemically bonded waterproofing layer which resists hydrostatic pressure up to 7 bar. Ideal for cellars, tunnels, underpasses etc. Where water penetration is a problem.</p> <p>stone</p> <p>0.9 sq m at 6mm (5kg unit)</p> <p>5400 cc</p> <p>light grey grey</p> <p>2250 cc </p> <p>UNIVERSAL SEALANTS - Flexible elastomeric sealants with excellent adhesion and chemical resistanceScotchkote Urethane Elastomer SS 441 (Formerly Thortex Seal-Tech SS) Food Grade Caulking Compound 75 Durometer High performance 75 durometer two component elastomeric caulking compound available in both paste and fluid grade suitable for use in food production areas. 5 x 1kg fluid or paste Includes primer light grey 8:1 - fluid 7:1 - paste 10 mins - fluid 20 mins - paste 20 mins - fluid 2 hours - paste 890 cc</p> <p>TIMBER REPAIR PRODUCTS - Versatile repair option for hardwood and softwood repairsScotchkote Timber Repair 864 (Formerly Thortex Timba-Tech) Universal Wood, Fibreglass and Ceramic Repair System Fast repairs to: damaged or rotted timber, hardwood floors, wood brick tiles, antique furniture, chairs, tables, steps, worktops, splintered wood. 1 x 2kg unit variable typical 6-7 mins 20 mins 1420 cc</p> <p>3</p> <p>4</p> <p>(10009)CPP_Ind&amp;Eng_Prod_cat.indd 3-4</p> <p>3/4/09 09:53:45</p> <p>Floor Repair and Protection Systems</p> <p>Rebuilding and Protection Guide</p> <p>Unit Sizes Available</p> <p>Colour</p> <p>S = Single T = Twin</p> <p>WB = Water Based SB = Solvent Based SF = 100% solids</p> <p>Typical Dry Film Thickness microns (mils)</p> <p>Theoretical Coverage Rate</p> <p>Volume Solids %</p> <p>FLOOR REPAIR AND PROTECTION SYSTEMS - A unique range of high performance screeds and coatings designed to protect floors in any environment Single component waterborne coatingsScotchkote Urethane Sealer CS 860 (Formerly Thortex Floor-Tech CS) Universal Acrylic Urethane Clear Sealer Protection System Clear water based floor sealer suitable for use as an abrasion resistant lacquer on wood. Low gloss version also available. 1 x 5 litre (5kg) unit clear S WB 25 (1) 13.6 sq m per litre at 25 microns (1 mil) dft 35</p> <p>Two component waterborne coatingsScotchkote WB Clear Sealer FS 827 (Formerly Thortex Floor-Tech FS Seal) Water Based Polyurethane Clear Sealer System Scotchkote Floor Sealer...</p>