500 MW TURBO GENERATOR

BHARAT HEAVY ELECTRICAL LIMITED

UNDER GUIDANCE OF Mr.J.K.PUNDIR

Turbo Generator• Def: It is a generator consisting of

steam or water turbines coupled to to an electric generator for production of electric power.

•EXCITER STATOR ROTOR WINDING

COREFRAME

It has following constructional features:

• Permanent magnets (Pilot exciter)

• Armature rotor (Main Exciter)

• Rectifiers (diodes)• Aluminum alloy

heat sink• Coupling bolts•

EXCITER

• It has the following constructional

features:– Made of 2 halves– Ventilation ducts– 3 man holes on both

sides– Water head– Bus– End Shields– Gear Terminal Box–

STATORFRAME

STATORCORE

– Built of Laminations (0.5 mm)– Staggered Layer– Hydraulic pressed and heated– Has cooling ducts in each part– Punching done to – accomodate windings–

–

It has the following constructional features:

ROTOR

• It has the following constructional features:

– Made after forging from vaccum cast steel ingot

– Longitudnal slots– Transverse Slots– Rotor wedges as damper winding– Cooling slots

• Process of making winding:– Conductors of definite

length– Conductors: hollow or

without cavity.– Stacked together– Silicon strips between the

conductors– Heated and insulation is

done– Insulation taken off from

ends– Transposition done at

proper distances–

WINDINGS

THANKTHANK YOUYOU!!!!