657 headsets

657

Bearings

Brakes

Cables & Casing

Cassettes & Freewheels

Chains & Guides

Chainrings & Guards

Cranks & Btm Brackets

Derailleurs

Fasteners

Forks & Shocks

Grips & Tape

Handlebars & Bar Ends

Headsets

Hubs

Pedals

Rims

Saddles

Seatposts

Shifters

Spokes

Stems

Tires

Tubes & Tube Care

Wheels

CO

MP

ON

ENTS

& P

AR

TS

complete headsets

Acros AH-06 HeadsetThe flagship headset designed for all types of riding on •1-1/8” external cup framesSpecially shaped steel-reinforced seal reduces friction & maintenance•Ceramic hybrid or stainless steel, angular contact bearings with low-•friction R3 seals

part# model steerer headtube ID stack color weight AC-3105 ceramic 1-1/8” 33.9mm 29.1mm black 99g AC-3107 ceramic 1-1/8” 33.9mm 29.1mm red 99g AC-3108 ceramic 1-1/8” 33.9mm 29.1mm white 99g AC-3114 stainless 1-1/8” 33.9mm 29.1mm black 109g AC-3116 stainless 1-1/8” 33.9mm 29.1mm silver 109g AC-3118 stainless 1-1/8” 33.9mm 29.1mm red 109g AC-3120 stainless 1-1/8” 33.9mm 29.1mm blue 109g AC-3122 stainless 1-1/8” 33.9mm 29.1mm gold 109g AC-3124 stainless 1-1/8” 33.9mm 29.1mm Ti-grey 109g AC-3128 stainless 1-1/8” 33.9mm 29.1mm green 109g

Acros AH-07 HeadsetDesigned for DH and FR use on 1-1/8” external cup frames•Stainless steel bearing AH-06 design with extra long, 22mm cup •insertion for added strength (verify frame compatibility)

part# model steerer headtube ID stack color weight AC-3131 stainless 1-1/8” 33.9mm 30.5mm black 125g

Acros AH-01 HeadsetDesigned for XC-mtn or road use on 1-1/8” external cup frames•Ceramic hybrid: ceramic ball bearings with stainless races and low-•friction sealsUses a smaller bearing diameter and a smaller overall cup size to reduce •weight and a labyrinth seal to reduce bearing contamination

part# model steerer headtube ID stack color weight AC-3100 ceramic 1-1/8” 33.9mm 23.4mm red 76g AC-3101 ceramic 1-1/8” 33.9mm 23.4mm black 76g

Acros AH-03 HeadsetDesigned for XC, AM and Enduro use on 1-1/8” external cup frames•Steel, angular contact bearings with an R2 lip seal to reduce contamination•

part# model steerer headtube ID stack color weight AC-3155 steel 1-1/8” 33.9mm 29.2mm black 106g

Acros Block Lock HeadsetDesigned for FR/DH use with an integrated steering lock to help prevent •frame damage when using triple-clamp forks and/or low barsElastomers with a stop-post inside the top cap keep your handlebars •and stanchions from hitting the frame during a crash (includes one set of replacement elastomers)Stainless steel angular contact bearings with an oversized race and seals •to reduce contaminationAvailable for 1-1/8” external cup (EC) or Zero Stack (ZS) frames•

part# model steerer headtube ID stack color weight AC-3401 AH-06 EC 1-1/8” 33.9mm 40.1mm black - AC-3405 Ai-22 ZS 1-1/8” 44.0mm 45.7mm black 118g

Acros Ai-69 Clamp HeadsetDesigned for lightweight road use on Integrated (Cane Creek •standard) framesInnovative “Clamp” system: after setting your stem, preload the •internal-ramp separation collar with the integrated set screw to create the needed compression, eliminating the need for an internal-steerer compression device thus saving even more system weightCeramic hybrid or stainless steel, angular contact bearings with low-•friction R3 seals

part# model steerer headtube ID stack color weight AC-3301 ceramic 1-1/8” IS-CC 41.2mm 23mm black 70g AC-3303 stainless 1-1/8” IS-CC 41.2mm 23mm black 74g

Acros AH-06 Headset

Acros AH-01 HeadsetAcros AH-07 Headset

Acros Block Lock Headset

Acros Clamp Ai-69 Headset

Acros AH-03 Headset

Acros Headsets are hand built in Renningen, Germany.

658

COM

PO

NEN

TS

& PA

RTS

Bearings

Brakes

Cables & Casing


Chains & Guides

Chainrings & Guards


Derailleurs

Fasteners

Forks & Shocks

Grips & Tape


Headsets

Hubs

Pedals

Rims

Saddles

Seatposts

Shifters

Spokes

Stems

Tires

Tubes & Tube Care

Wheels

headsets complete

Acros Zero Stack HeadsetAll-aound use on 1-1/8” semi-integrated, Zero Stack (ZS) frames•Reduces the stack height by installing the bearing inside the headtube•Ai-22 model: ceramic hybrid or stainless steel, angular contact bearings •with low-friction R3 sealsAi-03 model: steel, angular contact bearings with R2 lip seals•

part# model steerer headtube ID stack color weight AC-3201 Ai-22 ceramic 1-1/8” 44.0mm 14.9mm black 90g AC-3205 Ai-22 ceramic 1-1/8” 44.0mm 14.9mm red 90g AC-3212 Ai-22 stainless 1-1/8” 44.0mm 14.9mm black 93g AC-3220 Ai-03 steel 1-1/8” 44.0mm 21.6mm black 96g

Acros 1.5 HeadsetAvailable for 1.5” steerer or as a reducer for 1-1/8” steerer•Includes stainless steel, angular contact bearings•AH-15 models use traditional (EC), external bearing cups•Ai-25 reducer model uses Zero Stack (ZS), internal bearing cups•

part# model steerer headtube ID stack color weight AC-3242 AH-15 EC 1.5” 49.6mm 31.0mm black 156g AC-3245 AH-15R EC reducer 1-1/8” 49.6mm 31.3mm black 190g AC-3231 Ai-25 ZS reducer 1-1/8” 49.6mm 16.0mm black 143g AC-3233 Ai-25 ZS reducer 1-1/8” 49.6mm 16.0mm red 143g

Aheadset ICBM Integrated HeadsetIntegrated headset for ICBM specific frames with 44.8mm headtube ID•Full compliment angular contact cartridge bearings•

part# size stack color weight DC-0235 1-1/8” threadless 8.0mm black 80g

Aheadset Traditional Threadless HeadsetCup, bearing, and cone form identical top and bottom assemblies•Top cover is integrated with compression ring •to create a simple, light, effective assemblyCups and cones work together with a simple O-ring to seal-out •contaminants and increase the headsets life expectancyHigh ball compliment and large ball diameter increase headset durability•

part# size stack color weight DC-0801 1-1/8” threadless 29.5mm black 165g DC-0803 1” threadless 29.5mm black 163g

Aheadset Traditional Threaded HeadsetCup, bearing and cone form identical top and bottom assemblies•Top cover is integrated with compression ring •to create a simple, light, effective assemblyCups and cones work together with a simple O-ring to seal-out •contaminants and increase the headsets life expectancyHigh ball compliment and large ball diameter increase headset durability•

part# size stack color weight DC-0811 1-1/8” threaded 34.1mm black 205g DC-0813 1” threaded 34.1mm black 205g

Aheadset IS Integrated HeadsetHigh-quality semi-cartridge bearings•Top cover is integrated with compression ring •to create a simple, light, effective assemblyDue to standard bearing design, the Aheadset IS can easily •be upgraded to high-quality Cane Creek sealed bearingsIS-CC: Integrated System threadless headset for Cane Creek •compatible frames with 41.0mm headtube ID

part# size stack color weight DC-0821 1-1/8” IS-CC 7mm black 65g

Aheadset ICBM Integrated Headset

Aheadset Traditional Threadless Headset

Aheadset Traditional Threaded Headset

Aheadset IS Integrated Headset

Acros 1.5 Headset

Acros Zero Stack Headset

659

Bearings

Brakes

Cables & Casing


Chains & Guides

Chainrings & Guards


Derailleurs

Fasteners

Forks & Shocks

Grips & Tape


Headsets

Hubs

Pedals

Rims

Saddles

Seatposts

Shifters

Spokes

Stems

Tires

Tubes & Tube Care

Wheels

CO

MP

ON

ENTS

& P

AR

TS

complete headsets

Aheadset ZS Zero Stack HeadsetCup, bearing, and cone form identical top and bottom assemblies•Top cover is integrated with compression ring to create a simple, light, effective assembly•Cups and cones work together with a simple O-ring to seal-out •contaminants and increase the headsets life expectancyHigh ball compliment and large ball diameter increase headset durability•ZS: only fits Zero Stack frames with 44.0mm headtube ID (for 1-1/8”)•

part# size stack color weight DC-0826 1-1/8” ZS 14.5mm black 130g

Black Market Cartridge Headset42mm headsets fit all Blk Mrkt chromoly frames•44mm headsets fits the Blk Mrkt Killswitch frame•

part# size stack color weight BL-1900 1-1/8” IS-CA 5mm black 79g BL-1901 1-1/8” ZS 5mm black 102g

Campagnolo Integrated Headset

For framesets designed for Campagnolo-standard integrated headsets•IS-CA: 41.8mm-OD 45x45 degree, steel cup/caged-bearing system •(1/8” upper/lower) and a 30.0mm-ID crown raceIncludes steerer compression device with stem top cap and bolt•Record: carbon fiber stem cap and upper cap/spacer (TTC: tall top cap)•

part# model size stack color weight CP-10130 Record 1-1/8” IS-CA 5.9mm carbon 75g CP-10131 Record-TTC 1-1/8” IS-CA 15.9mm carbon 80g

Campagnolo Threadless HeadsetCaged bearing system 1” (5/32”-upper, 3/16”-lower), 1-1/8” •(5/32”-upper/lower) with polished alloy cups and steel races/conesThreadless compression system with star-nut, stem top cap and bolt•1” has 26.4mm-ID crown race, 1-1/8” has 30.0mm-ID crown race•Record: carbon fiber top cap and band around lower cup•

part# model size stack color weight CP-10122 Record 1” threadless 24.5mm silver/carbon 110g

Campagnolo Record Threaded HeadsetCaged bearing system (5/32”-upper, 3/16”-lower) with alloy cups and steel races/cones•1”x24tpi BSA English threading with a 26.4mm-ID crown race•

part# size stack color weight CP-10111 1” threaded 36.5mm silver 105g

Cane Creek AER HeadsetCane Creek introduces the world’s lightest headset•Incorporating a Norglide composite upper bearing technology •into a super lightweight machined window design cupIncludes Compression Ring Technology with a split-lip lower bearing•Recommended for road applications (weights exclude spacers and preload assembly)•Available as a Traditional, Zero Stack or Integrated Aheadset•IS AER: IS-CC: Integrated System threadless headset for Cane Creek compatible frames with •41.0mm headtube ID (stainless steel 36x45 degree angular contact cartridge bearings)

part# model size stack color weight DC-0600 Traditional 1-1/8” threadless 19.95mm black 46g DC-0602 Zero Stack 1-1/8” ZS 10.13mm black 50g DC-0604 Integrated 1-1/8” IS-CC 6.2mm black 33g

Black Market Cartridge Headset

Campagnolo Record Threaded Headset

Campagnolo Threadless Headset

Campagnolo Integrated Headset

Aheadset ZS Zero Stack Headset

Cane Creek AER Headset

DC-0604

DC-0600DC-0602

660

COM

PO

NEN

TS

& PA

RTS

Bearings

Brakes

Cables & Casing


Chains & Guides

Chainrings & Guards


Derailleurs

Fasteners

Forks & Shocks

Grips & Tape


Headsets

Hubs

Pedals

Rims

Saddles

Seatposts

Shifters

Spokes

Stems

Tires

Tubes & Tube Care

Wheels

headsets complete

Cane Creek AngleSet Headset

Eccentrically machined ZeroStack bearing cups designed to create a •steeper or slacker head angle and are independent of headtube lengthAvailable as a +/- 1.0 degree headset or as a kit that includes additional cups for +/- 0.5, 1.0 and •1.5 degree adjustability (install on frame centerline axis and rotate 180-degree to change angle)CNC machined from U.S. materials in Cane Creek’s Fletcher, NC facility•Contoured and relieved 7075-T6 aluminum for minimized weight and maximized •strength, with self-aligning black oxide steel bearing design for durabilityZS49-TR49/40 fits: 1.5” headtube with a 1.5>1-1/8” tapered steerer•ZS49-ZS49/30 fits: 1.5” headtube with an 1-1/8” straight steerer•ZS44-ZS49/30 fits: traditional tapered headtube with an 1-1/8” straight steerer•ZS44-ZS56/30 fits: ZeroStack tapered headtube with an 1-1/8” straight steerer•

part# model steerer headtube ID offset angle crown race stack weight (top/bottom) +/-

DC-1407 ZS49-TR49/40 1.5>1-1/8” 49.6/49.6mm 1.0 deg 39.8mm 11mm 129g DC-1401 ZS49-ZS49/30 1-1/8” 49.6/49.6mm 1.0 deg 30.0mm 11mm 132g DC-1403 ZS44-ZS49/30 1-1/8” 44.0/49.6mm 1.0 deg 30.0mm 13mm 112g DC-1405 ZS44-ZS56/30 1-1/8” 44.0/55.9mm 1.0 deg 30.0mm 13mm 131g DC-1408 ZS49-TR49/40 (kit) 1.5>1-1/8” 49.6/49.6mm 0.5/1.0/1.5 deg 39.8mm 11mm 129g DC-1402 ZS49-ZS49/30 (kit) 1-1/8” 49.6/49.6mm 0.5/1.0/1.5 deg 30.0mm 11mm 132g DC-1404 ZS44-ZS49/30 (kit) 1-1/8” 44.0/49.6mm 0.5/1.0/1.5 deg 30.0mm 13mm 112g DC-1406 ZS44-ZS56/30 (kit) 1-1/8” 44.0/55.9mm 0.5/1.0/1.5 deg 30.0mm 13mm 131g

Cane Creek 110 Series Headset

110-Series features the strongest materials, most effective seals and •the best aesthetics with a 110 year no-questions-asked warrantyCNC machined from U.S. materials in Cane Creek’s Fletcher, NC facility•Contoured and relieved 7075-T6 aluminum for minimized weight and •maximized strength, with split-lip sealed stainless steel bearingsLow friction, Dual-Seal crown race and top cover provides maximum sealing •from contaminants, plus a captured compression ring design for carbon steerer compatibility (Interlok spacer compatible, sold separately)IS-CC (36x45 degree Cane Creek Integrated), ZS (Zero Stack), •or EC (traditional, External Cup) available for 1-1/8” and 1.5” steerer applicationsInternal parts are cross-compatible across the 10, 40 and 110 series•

part# model steerer headtube ID stack crown race color DC-1501 IS-CC 1-1/8” 41.2mm 9mm (short) 30.0mm black DC-1503 IS-CC 1-1/8” 41.2mm 9mm (short) 30.0mm silver DC-1505 IS-CC 1-1/8” 41.2mm 9mm (short) 30.0mm blue DC-1507 IS-CC 1-1/8” 41.2mm 9mm (short) 30.0mm red DC-1509 IS-CC 1-1/8” 41.2mm 15mm (tall) 30.0mm black DC-1511 IS-CC 1-1/8” 41.2mm 15mm (tall) 30.0mm silver DC-1513 IS-CC 1-1/8” 41.2mm 15mm (tall) 30.0mm blue DC-1515 IS-CC 1-1/8” 41.2mm 15mm (tall) 30.0mm red DC-1520 ZS 1-1/8” 44.0mm 8/4mm (short) 30.0mm black DC-1522 ZS 1-1/8” 44.0mm 8/4mm (short) 30.0mm silver DC-1524 ZS 1-1/8” 44.0mm 8/4mm (short) 30.0mm blue DC-1526 ZS 1-1/8” 44.0mm 8/4mm (short) 30.0mm red DC-1528 ZS 1-1/8” 44.0mm 15/4mm (tall) 30.0mm black DC-1530 ZS 1-1/8” 44.0mm 15/4mm (tall) 30.0mm silver DC-1532 ZS 1-1/8” 44.0mm 15/4mm (tall) 30.0mm blue DC-1534 ZS 1-1/8” 44.0mm 15/4mm (tall) 30.0mm red DC-1536 ZS reducer 1-1/8” 49.6mm 8/4mm 30.0mm black DC-1538 ZS reducer 1-1/8” 49.6mm 8/4mm 30.0mm silver DC-1540 ZS reducer 1-1/8” 49.6mm 8/4mm 30.0mm blue DC-1542 ZS reducer 1-1/8” 49.6mm 8/4mm 30.0mm red DC-1551 EC 1-1/8” 33.9mm 16/12mm 30.0mm black DC-1553 EC 1-1/8” 33.9mm 16/12mm 30.0mm silver DC-1555 EC 1-1/8” 33.9mm 16/12mm 30.0mm blue DC-1557 EC 1-1/8” 33.9mm 16/12mm 30.0mm red DC-1558 EC 1.5” 49.6mm 16/12mm 39.8mm black DC-1560 EC 1.5” 49.6mm 16/12mm 39.8mm silver DC-1562 EC 1.5” 49.6mm 16/12mm 39.8mm blue DC-1564 EC 1.5” 49.6mm 16/12mm 39.8mm red

Cane Creek AngleSet Headset


661

Bearings

Brakes

Cables & Casing


Chains & Guides

Chainrings & Guards


Derailleurs

Fasteners

Forks & Shocks

Grips & Tape


Headsets

Hubs

Pedals

Rims

Saddles

Seatposts

Shifters

Spokes

Stems

Tires

Tubes & Tube Care

Wheels

CO

MP

ON

ENTS

& P

AR

TS

complete headsets

Cane Creek 110 Series Headset Solutions

110-Series Solutions: separate top and bottom headset cup •assemblies for tapered, reducer and conversion applications (mix & match system helps reduce inventory overlap)Same features and materials as 110-series complete headsets including 110 year warranty•Top assemblies include star nut and top cap, while bottom assemblies include crown race•IS-CC (36x45 degree Cane Creek Integrated), ZS (Zero Stack), or EC (traditional, •External Cup) available for reduced 1-1/8” and tapered 1.25>1-1/8”, 1.5>1-1/8” steerersPlease see: www.canecreek.com/headset-fit-finder for fit information•

part# model (cup) steerer headtube ID stack crown race DC-1606 EC (upper) 1.5” 49.6mm 16mm - DC-1607 IS-CC (lower) 1-1/8” 41.2mm 1mm 30.0mm DC-1611 ZS (lower) 1-1/8” 44.0mm 4mm 30.0mm DC-1615 EC (lower) 1-1/8” 33.9mm 12mm 30.0mm DC-1605 EC (upper) 1-1/8” + tapered 33.9mm 16mm - DC-1600 IS-CC (upper) 1-1/8” + tapered 41.2mm 9mm (short) - DC-1601 IS-CC (upper) 1-1/8” + tapered 41.2mm 15mm (tall) - DC-1602 ZS (upper) 1-1/8” + tapered 44.0mm 8mm (short) - DC-1603 ZS (upper) 1-1/8” + tapered 44.0mm 15mm (tall) - DC-1604 ZS reducer (upper) 1-1/8” + tapered 49.6mm 8mm - DC-1618 EC reducer (lower) 1-1/8” 49.6mm 12mm 30.0mm DC-1612 ZS reducer (lower) 1-1/8” 49.6mm 4mm 30.0mm DC-1609 IS reducer (lower) 1-1/8” 52.0mm 1mm 30.0mm DC-1613 ZS reducer (lower) 1-1/8” 55.9mm 4mm 30.0mm DC-1616 EC convert (lower) 1.25>1-1/8” 44.0mm 12mm 33.0mm DC-1608 IS (lower) 1.25>1-1/8” 47.0mm 1mm 33.0mm DC-1617 EC convert (lower) 1.5>1-1/8” 44.0mm 12mm 39.8mm DC-1619 EC (lower) 1.5>1-1/8” 49.6mm 12mm 39.8mm DC-1610 IS (lower) 1.5>1-1/8” 52.0mm 1mm 39.8mm DC-1614 ZS (lower) 1.5>1-1/8” 55.9mm 4mm 39.8mm

Cane Creek 100 Series HeadsetThe 100-Series features the strongest materials, most effective seals and •premier aestheticsCNC machined from U.S. materials in Cane Creek’s Fletcher, NC facility•Contoured and relieved 7075-T6 aluminum for minimized weight and •maximized strength, with split-lip sealed stainless steel bearingsLow friction, Dual-Seal crown race and top cover provides maximum sealing •from contaminants, plus a captured compression ring design for carbon steerer compatibility (Interlok spacer compatible, sold separately)Available for 1” and 1-1/8” steerers•Internal parts are cross-compatible across the 10, 40 and 110 series•

part# model steerer headtube ID stack (top/bottom) crown race color DC-0401 EC 1-1/8” threadless 33.9mm 16.5/12mm 30.0mm black DC-0403 EC 1-1/8” threadless 33.9mm 16.6/12mm 30.0mm silver DC-0412 EC 1” threadless 30.1mm 16/11.65mm 26.4mm black DC-0414 EC 1” threadless 30.1mm 16/11.65mm 26.4mm silver DC-0420 EC 1” threaded 30.1mm 27.1/11.65mm 26.4mm black DC-0422 EC 1” threaded 30.1mm 27.1/11.65mm 26.4mm silver


Cane Creek 100 Headset

662

COM

PO

NEN

TS

& PA

RTS

Bearings

Brakes

Cables & Casing


Chains & Guides

Chainrings & Guards


Derailleurs

Fasteners

Forks & Shocks

Grips & Tape


Headsets

Hubs

Pedals

Rims

Saddles

Seatposts

Shifters

Spokes

Stems

Tires

Tubes & Tube Care

Wheels

headsets complete

Cane Creek 40 Series HeadsetThe 40-Series is the work-horse of Cane Creek’s headset line-up •and incorporates all the features necessary for a durable, light-weight, long-lasting headset while offering the perfect balance of performance, durability and valueContoured and relieved 6061-T6 aluminum for minimized weight • and maximized strength, with split-lip sealed stainless steel bearingsLow friction, Dual-Seal crown race and top cover provides maximum •sealing from contaminants, plus a captured compression ring design for carbon steerer compatibility (Interlok spacer compatible, sold separately)IS-CC (36x45 degree Cane Creek Integrated), IS-CA (45x45 degree •Campy Hiddenset), ZS (Zero Stack), or EC (traditional, External Cup) available for 1” and 1-1/8” threadless steerersInternal parts are cross-compatible across the 10, 40 and 110 series•

part# model steerer headtube ID stack (top/bottom) crown race DC-1701 IS-CC 1” 38.2mm 9/1mm (short) 26.4mm DC-1703 IS-CC 1” 38.2mm 15/1mm (tall) 26.4mm DC-1705 IS-CC 1-1/8” 41.2mm 9/1mm (short) 30.0mm DC-1707 IS-CC 1-1/8” 41.2mm 15/1mm (tall) 30.0mm DC-1709 IS-CC carbon 1-1/8” 41.2mm 9/1mm (short) 30.0mm DC-1711 IS-CC carbon 1-1/8” 41.2mm 15/1mm (tall) 30.0mm DC-1712 IS-CA 1-1/8” 42.0mm 9/1mm (short) 30.0mm DC-1714 IS-CA 1-1/8” 42.0mm 15/1mm (tall) 30.0mm DC-1716 IS-CA carbon 1-1/8” 42.0mm 9/1mm (short) 30.0mm DC-1718 IS-CA carbon 1-1/8” 42.0mm 15/1mm (tall) 30.0mm DC-1719 ZS 1-1/8” 44.0mm 8/4mm (short) 30.0mm DC-1721 ZS 1-1/8” 44.0mm 15/4mm (tall) 30.0mm DC-1723 ZS carbon 1-1/8” 44.0mm 8/4mm (short) 30.0mm DC-1725 ZS carbon 1-1/8” 44.0mm 15/4mm (tall) 30.0mm DC-1727 ZS carbon reducer 1-1/8” 49.6mm 4/4mm 30.0mm DC-1728 EC 1” 30.1mm 16/12mm 26.4mm DC-1730 EC 1-1/8” 33.9mm 16/12mm 30.0mm DC-1731 EC 1.5” 49.6mm 16/12mm 39.8mm


40-Series Solutions: separate top and bottom headset cup •assemblies for tapered, reducer and conversion applications (mix & match system helps reduce inventory overlap)Same features and materials as 40-series complete headsets•Top assemblies include star nut and top cap, •while bottom assemblies include crown raceIS-CC (36x45 degree Cane Creek Integrated), IS-CA (45x45 degree •Campy Hiddenset), ZS (Zero Stack), or EC (traditional, External Cup) available for 1-1/8” and tapered 1.5>1-1/8” steerersPlease see: www.canecreek.com/headset-fit-finder for fit information•

part# model (cup) steerer headtube ID stack crown race DC-1764 EC (upper) 1-1/8” + tapered 33.9mm 16mm - DC-1750 IS-CC (upper) 1-1/8” + tapered 41.2mm 9mm (short) - DC-1752 IS-CC (upper) 1-1/8” + tapered 41.2mm 9mm (tall) - DC-1753 IS-CC carbon (upper) 1-1/8” + tapered 41.2mm 9mm (short) - DC-1754 IS-CC carbon (upper) 1-1/8” + tapered 41.2mm 15mm (tall) - DC-1755 IS-CA (upper) 1-1/8” + tapered 42.0mm 9mm (short) - DC-1756 IS-CA (upper) 1-1/8” + tapered 42.0mm 15mm (tall) - DC-1757 IS-CA carbon (upper) 1-1/8” + tapered 42.0mm 9mm (short) - DC-1758 IS-CA carbon (upper) 1-1/8” + tapered 42.0mm 15mm (tall) - DC-1759 ZS (upper) 1-1/8” + tapered 44.0mm 8mm (short) - DC-1760 ZS (upper) 1-1/8” + tapered 44.0mm 15mm (tall) - DC-1761 ZS carbon (upper) 1-1/8” + tapered 44.0mm 8mm (short) - DC-1762 ZS carbon (upper) 1-1/8” + tapered 44.0mm 15mm (tall) - DC-1763 ZS reducer (upper) 1-1/8” + tapered 49.6mm 8mm - DC-1772 EC reducer (lower) 1-1/8” 49.6mm 12mm 30.0mm DC-1767 ZS reducer (lower) 1-1/8” 49.6mm 4mm 30.0mm DC-1765 IS reducer (lower) 1-1/8” 52.0mm 1mm 30.0mm DC-1768 ZS reducer (lower) 1-1/8” 56.0mm 4mm 30.0mm DC-1770 EC convert (lower) 1.5>1-1/8” 44.0mm 12mm 39.8mm DC-1771 EC (lower) 1.5>1-1/8” 49.6mm 12mm 39.8mm DC-1766 IS (lower) 1.5>1-1/8” 52.0mm 1mm 39.8mm DC-1769 ZS (lower) 1.5>1-1/8” 56.0mm 4mm 39.8mm



663

Bearings

Brakes

Cables & Casing


Chains & Guides

Chainrings & Guards


Derailleurs

Fasteners

Forks & Shocks

Grips & Tape


Headsets

Hubs

Pedals

Rims

Saddles

Seatposts

Shifters

Spokes

Stems

Tires

Tubes & Tube Care

Wheels

CO

MP

ON

ENTS

& P

AR

TS

complete headsets


The 10-Series has the look and feel of Cane Creek’s class-leading •40-Series headsets with simpler machining and more economical materialsDesigned with the upgrade path in mind, the 10-Series shares the •internal geometry of Cane Creek’s higher-end headsets and, as a result, replacement and upgrade parts are readily available6061-T6 aluminum construction, sealed, lightweight polymer crown race •and compression ring (Interlok spacer compatible, sold separately)ZS (Zero Stack) and EC (traditional. External Cup) •models for 1-1/8” and 1.5” steerersInternal parts are cross-compatible across the 10, 40 and 110 series•

part# model steerer headtube ID stack (top/bottom) crown race DC-1800 ZS 1-1/8” 44.0mm 8/4mm (short) 30.0mm DC-1801 ZS 1-1/8” 44.0mm 15/4mm (tall) 30.0mm DC-1803 EC 1-1/8” 33.9mm 16/12mm 30.0mm DC-1802 EC 1.5” 49.6mm 16/12mm 39.79mm

Crank Brothers Directset Cobalt HeadsetDirectset uses the cups as a bearing race •to eliminate extra parts and minimize weightCobalts are designed for Cross Country use with 28-ball •sealed cartridge bearings. Includes installation ringCobalt SL: stainless steel races•Cobalt C: bearing steel races•

part# model size stack color weight CE-6022 Cobalt SL 1-1/8” threadless 20.3mm silver 65g CE-6031 Cobalt C 1-1/8” threadless 20.3mm black 65g

Crank Brothers Directset Iodine HeadsetDirectset uses the cups as a bearing race to •eliminate extra parts and minimize weightIodines are recommended for All Mountain use with upper 28-ball sealed •cartridge bearing and lower 34-ball cartridge. Includes installation ringIodine SL: stainless steel races•Iodine C: bearing steel races•

part# model size stack color weight CE-6112 Iodine SL 1-1/8” threadless 20.56mm silver 65.5g CE-6121 Iodine C 1-1/8” threadless 20.56mm black 65.5g

Crank Brothers Directset Sage HeadsetDirectset uses the cups as a bearing race to •eliminate extra parts and minimize weightSages are perfect for Freeride use with upper and lower 34-ball sealed cartridge •bearings and longer cup insertion into frame. Includes installation ringSage SL: stainless steel races•Sage C: bearing steel races•

part# model size stack color weight CE-6242 Sage SL 1-1/8” threadless 20.56mm silver 92g CE-6251 Sage C 1-1/8” threadless 20.56mm black 92g CE-6255 Sage C 1.5” threadless 20.56mm black 92g

Crank Brothers Directset Opium HeadsetDirectset uses the cups as a bearing race •to eliminate extra parts and minimize weightOpiums are engineered specifically for Downhill use with upper and •lower 34-ball sealed cartridge bearings. Includes installation ringOpium SL: stainless steel races•Opium C: bearing steel races•Opium C Reducer: headset allows use of 1-1/8” fork on a 1.5” frame•

part# model size stack color weight CE-6302 Opium SL 1-1/8” threadless 20.56mm silver 70g CE-6311 Opium C 1-1/8” threadless 20.56mm black 70g CE-6315 Opium C Reducer 1.5” to 1-1/8” 20.56mm black 90g


Crank Brothers Directset Cobalt

Crank Brothers Directset Iodine

Crank Brothers Directset Sage

Crank Brothers Directset Opium

664

COM

PO

NEN

TS

& PA

RTS

Bearings

Brakes

Cables & Casing


Chains & Guides

Chainrings & Guards


Derailleurs

Fasteners

Forks & Shocks

Grips & Tape


Headsets

Hubs

Pedals

Rims

Saddles

Seatposts

Shifters

Spokes

Stems

Tires

Tubes & Tube Care

Wheels

headsets complete

Cinelli/Columbus Integrated Headset1-1/8” threadless Integrated System headsets for Cinelli framesets•IS-CC: Integrated System threadless headset for Cane Creek •compatible frames with 41.0mm headtube ID (stainless steel 36x45 degree angular contact cartridge bearings)IS-CA: Integrated System threadless headset for Campagnolo •Hiddenset frames with 41.8mm headtube ID (stainless steel 45x45 degree angular contact cartridge bearings)Includes: aluminum, upper cap/spacer with compression ring •and seal, bearings, frame cup/races, and a 30.0mm fork crown race

part# size stack color weight CN-9610 1-1/8” IS-CC 12.5mm black 57g CN-9618 1-1/8” IS-CA 15.1mm black 72g

FSA Orbit Xtreme-Pro Ceramic HeadsetFeatures FSA Ceramic cartridge bearings with smoother, lighter balls•Premium headset with forged, CNC machined 7075 aluminum cups, •stainless steel angular contact cartridge bearings, compression device and a 10 year warranty

part# size stack color weight FS-9945 1-1/8” threadless 30mm red/black 100g

FSA Orbit CF Ceramic HeadsetFeatures FSA Ceramic cartridge bearings with smoother, lighter balls•IS-CA: Integrated System threadless drop-in headset for Campagnolo •Hiddenset compatible frames with 41.8mm headtube ID8mm tall carbon fiber bearing cover with 45/45 degree stainless •steel angular contact bearings, 30.0mm crown race ID

part# size stack color weight FS-6808 1-1/8” IS-CA 10.5mm red/carbon 65g

FSA Orbit IS-Carbon Ceramic Headset

Features FSA Ceramic cartridge bearings with smoother, lighter balls•Micro angular contact cartridge bearings press directly into frame•8mm carbon fiber bearing cap. 30.0mm crown race ID•IS-CC: Integrated System threadless headset for Cane •Creek compatible frames with 41.0mm headtube ID

part# size stack color weight FS-6728 1-1/8” IS-CC 10mm red/carbon 52g

FSA Orbit Z Ceramic HeadsetFeatures FSA Ceramic cartridge bearings with smoother, lighter balls•Zero Stack threadless headset fits frames with 44.0mm headtube ID•Aluminum deep-cups, stainless micro angular contact cartridge bearings•Aluminum bearing cap. 30.0mm crown race ID•

part# size stack color weight FS-6774 1-1/8” threadless 12.5mm red 76g

FSA Orbit Xtreme-Pro HeadsetPremium headset with forged, CNC machined 7075 •aluminum cups, stainless steel angular contact cartridge bearings, compression device and a 10 year warrantyFS-997 and FS-998 headsets have 22mm deep insertion cups, •FS-995 has standard 12mm deep cupsReducer headset converts OnePointFive frames to accept 1-1/8” forks •(standard 1.5” headset also available)

part# size stack color weight FS-995 1-1/8” standard cup 30mm black 102g FS-997 1.5” deep cup 30mm black 200g FS-998 1.5” to 1-1/8” reducer 30mm black 210g

FSA Orbit CF Ceramic Headset

FSA Orbit IS-Carbon Ceramic Headset

FSA Orbit Z Ceramic Headset

FSA Orbit Xtreme-Pro Ceramic Headset

FSA Orbit Xtreme-Pro Headset

Cinelli/Columbus Integrated Headset

665

Bearings

Brakes

Cables & Casing


Chains & Guides

Chainrings & Guards


Derailleurs

Fasteners

Forks & Shocks

Grips & Tape


Headsets

Hubs

Pedals

Rims

Saddles

Seatposts

Shifters

Spokes

Stems

Tires

Tubes & Tube Care

Wheels

CO

MP

ON

ENTS

& P

AR

TS

complete headsets

FSA Orbit CF Headset

IS-CA: Integrated System threadless drop-in headset for Campagnolo •Hiddenset compatible frames with 41.8mm headtube ID8.7mm tall carbon fiber bearing cover with 45/45 degree stainless •steel angular contact bearings, 30.0mm crown race ID

part# size stack color weight FS-681 1-1/8” IS-CA 10.5mm carbon 67g

FSA Orbit X-Carbon Road HeadsetForged, CNC machined aluminum cups •with micro angular contact sealed bearingsCarbon fiber top bearing cap•30.0mm crown race ID, 34.0 cup OD•

part# size stack color weight FS-6515 1-1/8” threadless 33.8mm black/carbon 94g

FSA Orbit Z Reducer HeadsetReducer headset for 1.5” headtube to accept 1-1/8” threadless steerer forks•Aluminum deep-cups, stainless micro angular contact cartridge bearings•Aluminum bearing cap. 30.0mm crown race ID•

part# size stack color weight FS-667 1.5” to 1-1/8” threadless 14.0mm black 90g

FSA Orbit X-CX Road HeadsetBuilt in cable hanger with a barrel adjuster for cyclocross applications•Forged, CNC machined aluminum cups with micro angular contact •sealed bearings30.0mm crown race ID, 34.0 cup OD•

part# size stack color weight FS-6531 1-1/8” threadless 43.5mm black 125g

FSA Orbit IS-Carbon Headset

Micro angular contact cartridge bearings press directly into frame•Choose 8 or 15mm carbon fiber bearing cap. 30.0mm crown race ID•IS-CC: Integrated System threadless headset for Cane •Creek compatible frames with 41.0mm headtube ID

part# size stack color weight FS-673 1-1/8” IS-CC (8mm cap) 10mm black 54.3g FS-675 1-1/8” IS-CC (15mm cap) 17mm black 54.3g

FSA Orbit ZS-Carbon HeadsetZero Stack threadless headset fits frames with 44.0mm headtube ID•Aluminum shallow-cups, stainless micro •angular contact cartridge bearings15mm conical carbon fiber bearing cap. 30.0mm crown race ID•

part# size stack color weight FS-6771 1-1/8” threadless 23.4mm black 85.5g

FSA Orbit Z HeadsetZero Stack threadless headset fits frames with 44.0mm headtube ID•Aluminum deep-cups, stainless micro angular contact cartridge bearings•Aluminum bearing cap. 30.0mm crown race ID•

part# size stack color weight FS-6775 1-1/8” threadless 12.5mm black 78g FS-6776 1-1/8” threadless 12.5mm white 78g FS-6779 1-1/8” threadless 12.5mm red 78g FS-6780 1-1/8” threadless 12.5mm blue 78g

FSA Orbit Z-CX HeadsetBuilt in cable hanger with a barrel adjuster for cyclocross applications•Zero Stack threadless headset fits frames with 44.0mm headtube ID•Aluminum deep-cups, stainless micro angular contact cartridge bearings•Aluminum bearing cap. 30.0mm crown race ID•


FSA Orbit X-CX Road Headset

FSA Orbit Z Reducer Headset

FSA Orbit IS-Carbon Headset

FSA Orbit ZS-Carbon Headset

FSA Orbit X-Carbon Road Headset

FSA Orbit CF Headset

FSA Orbit Z Headset

FSA Orbit Z-CX Headset

666

COM

PO

NEN

TS

& PA

RTS

Bearings

Brakes

Cables & Casing


Chains & Guides

Chainrings & Guards


Derailleurs

Fasteners

Forks & Shocks

Grips & Tape


Headsets

Hubs

Pedals

Rims

Saddles

Seatposts

Shifters

Spokes

Stems

Tires

Tubes & Tube Care

Wheels

headsets complete

FSA Orbit CF40-Carbon Tapered Headset

Tapered headtube headset for fork steerers that taper from 1-1/8” to 1.5”•Upper 1-1/8” IS-CA: cupless design with Campy-type 45/45 degree •angular contact bearing (41.8mm upper headtube ID)Lower 1.5” IS-CC: cupless design with Cane Creek-type 36/45 •degree angular contact bearing (52.0mm lower headtube ID)15mm carbon fiber top bearing cap•Used on many new road frames, including Ridley, Kuota, and others•16.6mm stack height•

part# upper lower color weight FS-6820 1-1/8” IS-CA 1.5” IS-CC (40.0mm race) black 86.2g

FSA Orbit CF33-Carbon Tapered HeadsetTapered headtube headset for fork steerers that taper from 1-1/8” to 1-1/4”•Upper 1-1/8” IS-CA: cupless design with Campy-type 45/45 degree •angular contact bearing (41.8mm upper headtube ID)Lower 1-1/4” IS-CA: cupless design with Campy-type 45/45 degree •angular contact bearing (47.0mm lower headtube ID)15mm carbon fiber top bearing cap•Used on many new road frames•16.6mm stack height•

part# upper lower color weight FS-6830 1-1/8” IS-CA 1-1/4” IS-CA (33.0mm race) black 68g

FSA Orbit X Road HeadsetForged, CNC machined aluminum cups •with micro angular contact sealed bearings1-1/8” has 30.0mm crown race ID, 34.0 cup OD•

part# size stack color weight FS-6501 1” threadless 31.5mm black 82g FS-651 1-1/8” threadless 31.5mm black 95g

FSA Orbit ZS HeadsetZero Stack threadless headset fits frames with 44.0mm headtube ID•Aluminum shallow-cups, stainless micro •angular contact cartridge bearingsAluminum bearing cap. 30.0mm crown race ID•

part# size stack color weight FS-6773 1-1/8” threadless 14mm black 78g

FSA Orbit MX HeadsetForged/CNC machined 6061 aluminum cups•7075 aluminum crown race•36 degree angular contact sealed bearings•30.0mm crown race ID, 34.0 cup OD•Includes compression device•

part# size stack color weight FS-961 1-1/8” threadless 32.4mm black 98g FS-962 1-1/8” threadless 32.4mm white 98g FS-9621 1-1/8” threadless 32.4mm blue 98g FS-9622 1-1/8” threadless 32.4mm red 98g FS-9623 1-1/8” threadless 32.4mm gold 98g

FSA Orbit IS-CX HeadsetBuilt in cable hanger with a barrel adjuster for cyclocross applications•Micro angular contact cartridge bearings press directly into frame•8mm aluminum bearing cap. 30.0mm crown race ID•IS-CC: Integrated System threadless headset for Cane •Creek compatible frames with 41.0mm headtube ID

part# size stack color weight FS-6760 1-1/8” IS-CC 17.7mm black 75g



FSA Orbit X Road Headset

FSA Orbit ZS Headset

FSA Orbit IS-CX Headset

FSA Orbit MX Headset

667

Bearings

Brakes

Cables & Casing


Chains & Guides

Chainrings & Guards


Derailleurs

Fasteners

Forks & Shocks

Grips & Tape


Headsets

Hubs

Pedals

Rims

Saddles

Seatposts

Shifters

Spokes

Stems

Tires

Tubes & Tube Care

Wheels

CO

MP

ON

ENTS

& P

AR

TS

complete headsets

FSA Pig DH-Pro Headset

Standard insertion CrMo lower cup, 6061 aluminum upper cup•Oversized 6807 lower cartridge bearing•Angular contact sealed upper bearing•30.0mm crown race ID, 34.0 cup OD•Includes aluminum top cap, bolt, star nut•

part# size stack color weight FS-771 1-1/8” threadless 31.0mm black 176g FS-772 1-1/8” threadless 31.0mm silver 176g

FSA Orbit XLII HeadsetForged/CNC machined 6061 aluminum cups•Angular contact sealed bearings•7075 aluminum crown race•30.0mm crown race ID, 34.0 cup OD•Compression device included•


FSA Orbit IS HeadsetMicro angular contact cartridge bearings press directly into frame•8mm aluminum bearing cap. 30.0mm crown race ID•IS-CC: Integrated System threadless headset for Cane Creek compatible •frames with 41.0mm headtube ID (38mm ID for 1” steerer frames)

part# size stack color weight FS-669 1” IS-CC 8.2mm black 49.2g FS-671 1-1/8” IS-CC 8.2mm black 49.2g FS-6711 1-1/8” IS-CC 8.2mm white 49.2g FS-6712 1-1/8” IS-CC 8.2mm red 49.2g FS-6713 1-1/8” IS-CC 8.2mm blue 49.2g

FSA Orbit DL HeadsetForged/CNC machined 6061 aluminum cups•5/32” caged ball upper and lower bearings•Includes compression device•Reducer headset converts OnePointFive frames to accept 1-1/8” forks•

part# size stack color weight FS-891 1-1/8” threadless 29.0mm black 112g FS-892 1-1/8” threadless 29.0mm silver 112g FS-8931 1.5” to 1-1/8” reducer 29.0mm black 130g

FSA Big Fat Pig 1.5” HeadsetForged CrMo lower cup, 6061 aluminum upper, 22mm cup insertion•Oversized 1/4” lower ball bearings, 5/32” upper bearings•Reducer headset converts OnePointFive frames to accept 1-1/8” forks •(standard 1.5” headset also available)

part# size stack color weight FS-765 1.5” threadless 29.6mm black 250g FS-767 1.5” to 1-1/8” reducer 29.6mm black 250g

FSA No. 18 HeadsetForged 1.2mm thin steel cups•36 degree angular contact sealed bearings•30.0mm crown race ID, 34.0 cup OD•Includes compression device•


FSA Duron X Road HeadsetForged, CNC machined aluminum cups and race•Micro angular contact sealed bearings•26.4 crown race ID, 30.2 cup OD, 40.6mm stack•For 1” threaded steerers•

part# size stack color weight FS-6302 1” threaded 40.6mm silver 140g

FSA Big Fat Pig 1.5” Headset

FSA Pig DH-Pro Headset

FSA Orbit DL Headset

FSA Orbit IS Headset

FSA Duron X Road Headset

FSA Orbit XLII Headset

FSA No. 18 Headset

668

COM

PO

NEN

TS

& PA

RTS

Bearings

Brakes

Cables & Casing


Chains & Guides

Chainrings & Guards


Derailleurs

Fasteners

Forks & Shocks

Grips & Tape


Headsets

Hubs

Pedals

Rims

Saddles

Seatposts

Shifters

Spokes

Stems

Tires

Tubes & Tube Care

Wheels

headsets complete

FSA No. 16 IS Headset

Angular contact cartridge bearings press directly into frame•9mm aluminum bearing cap. 30.0mm crown race ID•IS-CC: Integrated System threadless headset for Cane • Creek compatible frames with 41.0mm headtube ID


FSA Impact HeadsetIS-CA: BMX-grade Integrated System threadless drop-in headset to fit •frames with Campagnolo Hiddenset standard 41.8mm ID headtubeGyro compatible, 45/45 degree angular contact cartridge bearings, alloy •crown race, 30.0mm crown race ID

part# size stack color weight FS-701 1-1/8” IS-CA 9.4mm black 63g

FSA Pig HeadsetForged CrMo lower cup, 6061 aluminum upper•Oversized 1/4” lower ball bearings, 5/32” upper bearings•30.0mm crown race ID, 34.0 cup OD•Includes aluminum top cap, bolt, star nut•

part# size stack color weight FS-751 1-1/8” threadless 31.0mm black 180g FS-752 1-1/8” threadless 31.0mm silver 180g

FSA No. 23 IS HeadsetServiceable angular contact cartridge bearings press directly into frame•9mm aluminum bearing cap. 30.0mm crown race ID•IS-CC: Integrated System threadless headset for Cane •Creek compatible frames with 41.0mm headtube ID


FSA TH-857 HeadsetForged, CNC machined aluminum cups with •caged 5/32” lower ball bearings, 1/8” upper bearings1-1/8” has 30.0mm crown race ID, 34.0 cup OD•

part# size stack color weight FS-6490 1-1/8” threadless 26mm black 127g

FSA Mallet HeadsetCrMo cups•Oversized 3/16” lower ball bearings, 5/32” upper bearings•30.0mm crown race ID, 34.0 cup OD•Includes aluminum top cap, bolt, star nut•

part# size stack color weight FS-7491 1-1/8” threadless 25.9mm black 150g Genetic Cranium Headset

High quality, classic style 1” threaded headset with 26.4mm crown race•Polished alloy cups with steel races, caged bearings, o-ring seals•

part# size stack color weight GX-4442 1” threaded - polished 116g

Gravity Apogee Ceramic HeadsetFeatures FSA ceramic cartridge bearings with stronger, smoother, •lighter ballsFits 1-1/8” threadless steerer (Gyro compatible)•1-1/8” 36/36 degree ceramic angular contact bearing (ACB) upper and •1-1/8” 36/36 degree ceramic industrial cartridge bearing lower

part# size stack color weight GA-0105 1-1/8” threadless 31.6mm red/black 178g

Genetic Cranium Headset

Gravity Apogee Ceramic Headset

FSA Pig Headset

FSA Impact Headset

FSA Mallet Headset



FSA TH-857 Headset

669

Bearings

Brakes

Cables & Casing


Chains & Guides

Chainrings & Guards


Derailleurs

Fasteners

Forks & Shocks

Grips & Tape


Headsets

Hubs

Pedals

Rims

Saddles

Seatposts

Shifters

Spokes

Stems

Tires

Tubes & Tube Care

Wheels

CO

MP

ON

ENTS

& P

AR

TS

complete headsets

Gravity DX-Pro Tapered HeadsetTapered headtube headset for a tapered 1.5>1-1/8” steerer•Upper ZS assembly: Zero Stack semi-integrated cup, premium 36/45 degree •angular contact cartridge bearingLower EC assembly: traditional (external cup) with sealed cartridge bearing•23.3mm stack height•

headtube headtube part# steerer ID (upper) ID (lower) crown race weight GA-0142 1.5>1-1/8” 44.0mm 49.6mm 39.8mm 142g

(tapered)

Gravity SX Tapered HeadsetTapered headtube headset for a tapered 1.5>1-1/8” steerer•Upper ZS assembly: Zero Stack semi-integrated cup, 36/36 degree angular •contact bearingsLower EC assembly: traditional (external cup) with caged ball •bearings lower20.5mm stack height•


(tapered)

Gravity DX Tapered Reducer HeadsetTapered headtube reducer headset for using a fork with 1-1/8” steerer•Upper ZS assembly: Zero Stack semi-integrated cup, premium 36/45 degree •angular contact bearingLower EC reducer assembly: traditional (external cup) with caged •ball bearings21.6mm stack height•

headtube headtube part# steerer ID (upper) ID (lower) crown race weight GA-0112 1-1/8” 44.0mm 49.6mm 30.0mm 242g

Gravity SXE Tapered Reducer HeadsetTapered headtube reducer headset for using a fork with 1-1/8” steerer•Upper ZS assembly: Zero Stack semi-integrated cup, •semi-cartridge bearingLower EC reducer assembly: traditional (external cup) with caged •ball bearings22.4mm stack height•

headtube headtube part# steerer ID (upper) ID (lower) crown race weight GA-0134 1-1/8” 44.0mm 49.6mm 30.0mm 241g

Gravity 1 1.5” Reducer Headset1.5” headtube reducer headset for using a fork with 1.5>1-1/8” •tapered steererUpper ZS reducer assembly: Zero Stack semi-integrated cup, premium 36/45 •degree angular contact cartridge bearing (49.6mm upper headtube ID)Lower EC assembly: traditional (external cup) with caged ball bearings •(49.6mm lower headtube ID)18mm stack height•


(tapered)

Gravity DX Tapered Reducer Headset

Gravity SX Tapered Headset

Gravity SXE Tapered Reducer Headset

Gravity DX-Pro Tapered Headset

Gravity 1 Tapered Headset

670

COM

PO

NEN

TS

& PA

RTS

Bearings

Brakes

Cables & Casing


Chains & Guides

Chainrings & Guards


Derailleurs

Fasteners

Forks & Shocks

Grips & Tape


Headsets

Hubs

Pedals

Rims

Saddles

Seatposts

Shifters

Spokes

Stems

Tires

Tubes & Tube Care

Wheels

headsets complete

Gusset Integrated HeadsetEconomical integrated headset with CNC machined 6061 aluminum cap•IS-CA: Integrated System threadless drop-in headset for Campagnolo •Hiddenset, 45/45 degree angular contact cartridge bearings, compatible frames with 41.8mm headtube ID

part# size stack color weight GU-3000 1-1/8” IS-CA 5mm black -

Interloc Techno-Glide HeadsetPrecision CNC-machined 7075 aluminum cups•1” option uses 26.4mm crown race•Tange sealed cartridge bearings, with O-ring seal•

part# size stack color weight RD-1926 1” threaded 35.3mm black 93g RD-1927 1” threaded 35.3mm silver 93g RD-1931 1-1/8” threadless 27.7mm black 110g RD-1932 1-1/8” threadless 27.7mm silver 110g

Race Face Turbine HeadsetLightweight Cross Country/All Mountain headset•7075 aluminum cups, o-ring sealed top cap, •integrated compression ring top raceStainless steel angular contact retainer-type bearings•Crown races are electro less nickel plated for corrosion resistance•

part# size stack color weight RF-5011 1-1/8” threadless 28.5mm black 104g

Ritchey Zero Superlogic HeadsetTitanium coated ceramic hybrid 45/45 degree cartridge •bearings, dual lip labyrinth seals, 2014 aluminum cups/capZS: cupped, press-in threadless headset to fit Zero Stack •frames with 44.0mm headtube ID top and bottom

part# size stack color weight RC-3297 1-1/8” ZS 12.1mm black/red 79g

Ritchey Superlogic HeadsetTitanium coated ceramic hybrid 45/45 degree •cartridge bearings, dual lip labyrinth sealsCNC machined 2014 aluminum cups, 30.0mm crown race ID, 34.0mm cup OD•

part# size stack color weight RC-3299 1-1/8” threadless 26.9mm black/red 95g

Ritchey Zero WCS-Carbon HeadsetFull complement stainless steel angular contact cartridge •bearings, carbon bearing cover and compression capZS: cupped, press-in threadless headset to fit Zero Stack •frames with 44.0mm headtube ID (9mm cup depth)IS-CA: Integrated System threadless drop-in headset for Campagnolo •Hiddenset compatible frames with 41.8mm headtube ID

part# size stack color weight RC-3303 1-1/8” ZS 18mm black 86g RC-3305 1-1/8” IS-CA 16.8mm black 69g Ritchey Logic WCS Headset

Micro angular contact stainless steel sealed •cartridge bearings (smaller upper, larger lower)CNC machined 7075 aluminum cups, 30.0mm •crown race ID, 34.0mm cup OD

part# size stack color weight RC-3301 1-1/8” threadless 28.3mm black 97g

Race Face Turbine Headset

Ritchey Zero Superlogic Headset

Ritchey Superlogic Headset

Ritchey Zero WCS-Carbon Headset

Ritchey Logic WCS Headset

Interloc Techno-Glide Headset

Gusset Integrated Headset

671

Bearings

Brakes

Cables & Casing


Chains & Guides

Chainrings & Guards


Derailleurs

Fasteners

Forks & Shocks

Grips & Tape


Headsets

Hubs

Pedals

Rims

Saddles

Seatposts

Shifters

Spokes

Stems

Tires

Tubes & Tube Care

Wheels

CO

MP

ON

ENTS

& P

AR

TS

complete headsets

Ritchey Logic Pro Headset

CNC machined 7075 aluminum cups, sealed •cartridge bearings (smaller upper, larger lower)30.0mm crown race ID, 34.0mm cup OD•

part# size stack color weight RC-3307 1-1/8” threadless 32mm black 130g

Ritchey Logic HeadsetDurable steel upper/lower cups, 5/32” upper bearings, 3/16” lower bearings•1” threaded version uses a 26.4mm crown race•

part# size stack color weight RC-3315 1” threaded 35mm silver/black 140g RC-3310 1” threadless 27mm silver 127g RC-3316 1-1/8” threaded 35.5mm silver/black 170g RC-3311 1-1/8” threadless 28mm black 131g

Ritchey Zero Pro Tapered HeadsetTapered headtube headset for a tapered 1-1/8” to 1.5” fork steerer•Upper 1-1/8” IS-CA bearing: Campagnolo-type angular •contact bearing (41.8mm upper headtube ID)Lower 1.5” bearing: angular contact cartridge bearings •(52.0mm lower headtube ID, 40.0mm race ID)Alloy bearing cover and cap•

part# upper lower color weight RC-3318 1-1/8” IS-CA 1.5” (40.0mm race) black 110g

Ritchey Zero Pro HeadsetDrop-in headsets with full complement angular •contact cartridge bearings, alloy bearing cover and capIS-CC: Integrated System threadless headset for Cane Creek •compatible frames with 41.0mm headtube ID

part# size stack color weight RC-3320 1-1/8” IS-CC 10mm black 70g

Syncros FR2 Headset

Super heavy duty headset for the rider who broke all the rest•20mm insertion CNC machined stainless steel cups, retainer bearings•

part# size stack color weight SN-3362 1-1/8” threadless 34mm silver 258g

Syncros AM Hardcore HeadsetAll Mountain, Enduro, Freeride use forged, CNC machined •7075 aluminum cups with sealed cartridge bearingsOnePointFive short stack headset has 10mm insertion 7075 aluminum •upper and lower cups and Enduro sealed cartridge bearings

part# size stack color weight SN-3332 1-1/8” threadless 12.9mm black 113g

Woodman Saturn Solution 1.5” HeadsetConverts Onepointfive frames to accept 1-1/8” steerer forks•CNC 6061 aluminum cups with DBS triple bearing system: radial load •cartridge bearings upper and lower plus bottom needle thrust bearing

part# size stack color weight WN-3017 1.5” to 1-1/8” reducer 32.48mm black 170g

Woodman Axis-Headshok HeadsetSuper compact conversion headset, •allows 1-1/8” forks to fit into Headshok framesCNC 6061 aluminum cups with sealed cartridge bearings•30.0mm crown race ID, 49.5mm cup OD. Top cap and star nut included•

part# size stack color weight WN-3026 1-1/8” threadless 21.50mm black 130g WN-3028 1-1/8” threadless 21.50mm dark blue 130g WN-3029 1-1/8” threadless 21.50mm red 130g

Ritchey Logic Pro Headset

Ritchey Logic Headset

Ritchey Zero Pro Tapered Headset

Woodman Axis-Headshok Headset

Ritchey Zero Pro Headset

Syncros AM Hardcore Headset

Woodman Saturn Solution 1.5” Headset

Syncros FR2 Headset

672

COM

PO

NEN

TS

& PA

RTS

Bearings

Brakes

Cables & Casing


Chains & Guides

Chainrings & Guards


Derailleurs

Fasteners

Forks & Shocks

Grips & Tape


Headsets

Hubs

Pedals

Rims

Saddles

Seatposts

Shifters

Spokes

Stems

Tires

Tubes & Tube Care

Wheels

headsets complete

Woodman Axis SPG Headset

SPG model includes SP height adjustment shims •to fine tune cup clearance (prevent binding) and the SGC split crown race that needs no tools to installSplit race has a steel reinforcing ring and a rubber seal •ring to block out contaminantsCNC machined 6061 aluminum cups with 45/45 degree •angular contact cartridge bearings30.0mm crown race ID, 34.0 cup OD. Alloy top cap and star nut included•

part# size stack color weight WN-3091 1-1/8” threadless 27.0mm black 100g WN-3093 1-1/8” threadless 27.0mm pewter 100g WN-3094 1-1/8” threadless 27.0mm dark blue 100g WN-3095 1-1/8” threadless 27.0mm red 100g WN-3096 1-1/8” threadless 27.0mm pink 100g WN-3097 1-1/8” threadless 27.0mm gold 100g WN-3098 1-1/8” threadless 27.0mm orange 100g WN-3099 1-1/8” threadless 27.0mm green 100g

Woodman Axis SL Comp HeadsetCNC machined 6061 aluminum cups with 45/45 degree •angular contact cartridge bearings30.0mm crown race ID, 34.0 cup OD. Alloy top cap and star nut included•

part# size stack color weight WN-3100 1” threadless 27.0mm black 90g WN-3107 1-1/8” threadless 27.0mm black 108g WN-3108 1-1/8” threadless 27.0mm silver 108g WN-3109 1-1/8” threadless 27.0mm dark blue 108g WN-3110 1-1/8” threadless 27.0mm red 108g

Woodman Axis IC SPG HeadsetSPG model includes SP height adjustment shims •to fine tune cup clearance (prevent binding) and the SGC split crown race that needs no tools to installSplit race has a steel reinforcing ring and a rubber seal •ring to block out contaminantsIS-CA: Integrated System threadless drop-in headset for •Campagnolo Hiddenset, 45/45 degree angular contact cartridge bearings, compatible frames with 41.8mm headtube IDChoose 7mm or 20mm top cap. Alloy top cap and star nut included•

part# size stack color weight WN-3121 1-1/8” IS-CA 7mm top cap black 80g WN-3123 1-1/8” IS-CA 20mm top cap black 95g

Woodman Axis ICR SPG Headset

SPG model includes SP height adjustment shims •to fine tune cup clearance (prevent binding) and the SGC split crown race that needs no tools to installSplit race has a steel reinforcing ring and a rubber seal •ring to block out contaminantsIS-CC: Integrated System threadless drop-in headset for Cane Creek, •36/45 degree angular contact cartridge bearings, compatible for frames with 41.0mm headtube IDChoose 8mm or 20mm top cap. Alloy top cap and star nut included•

part# size stack color weight WN-3125 1-1/8” IS-CC 8mm top cap black 75g WN-3127 1-1/8” IS-CC 20mm top cap black 85g

Woodman Axis SICR Comp HeadsetEconomical Zero Stack hidden cup headset with CNC machined 6061 cups•Sealed cartridge bearings. Alloy top cap and star nut included•ZS: cupped, press-in threadless headset to fit Zero Stack frames with •44.0mm headtube ID

part# size stack color weight WN-3151 1-1/8” ZS 5mm top cap black 102g WN-3153 1-1/8” ZS 5mm top cap pewter 102g WN-3154 1-1/8” ZS 5mm top cap dark blue 102g WN-3155 1-1/8” ZS 5mm top cap red 102g WN-3156 1-1/8” ZS 5mm top cap pink 102g WN-3157 1-1/8” ZS 5mm top cap gold 102g WN-3158 1-1/8” ZS 5mm top cap green 102g

Woodman Axis SPG Headset

Woodman Axis IC SPG Headset

Woodman Axis ICR SPG Headset

Woodman Axis SICR Comp Headset

Woodman Axis SL Comp Headset

673

Bearings

Brakes

Cables & Casing


Chains & Guides

Chainrings & Guards


Derailleurs

Fasteners

Forks & Shocks

Grips & Tape


Headsets

Hubs

Pedals

Rims

Saddles

Seatposts

Shifters

Spokes

Stems

Tires

Tubes & Tube Care

Wheels

CO

MP

ON

ENTS

& P

AR

TS

accessories headsets

Azonic Headlock IIEliminates headset loosening on any 1-1/8” •headset system and replaces star-fangled nutIncludes both bolt blanks for 7.25” and 9.25” length headtubes•

part# size length AY-3052311 1-1/8” 7.25”/9.25”

Cinelli/Columbus Carbon Steerer ExpanderDesigned for 1-1/8” threadless carbon steerer tube Columbus forks•Dual, knurled aluminum expander wedge-rings for securing •and setting compression tension with threadless headsetsIncludes: expander kit with bolt and aluminum stem cap•

part# size color weight CN-9621 23.0-25.0mm black/silver 49g (w/ stem cap)

Deda Elementi Spadca Carbon Steerer Expander PlugMachined aluminum bolt and expander-collar system for use •as an internal headset preload plug on carbon-fiber steerer forksExpander bolt is externally and internally threaded to set expander •and accept standard stem preload bolt and top-cap

part# size DE-8123 23.5mm ID

FSA Compressor Cap for Carbon SteererCNC machined, anodized, laser etched •aluminum top cap with aluminum expanderFor use with smaller inner diameter fork steerer tubes•Use of this product in some forks may void the warranty•

part# size color weight FS-602 1” carbon steerer black 33g FS-609 1-1/8” carbon steerer black 37g

FSA Compressor Pro CarbonCarbon fiber top cap with aluminum expander•Reduced OD compression device fits most 1-1/8” carbon steerers•

part# size color weight FS-610 1-1/8” black 39g

FSA Carbon Top CapCarbon fiber top cap, 7075 aluminum bolt, steel star nut•

part# size color weight FS-614 1-1/8” black 21g

Gravity Whip It Top CapTop cap allows a hydraulic or cable actuated •brake line to run through the steerer tubeFeatures CNC hole in the upper cap with a •specially designed star nut to allow housing to passIncludes plastic bushing to protect housing from abrasion•

part# size color weight GA-0195 1-1/8” black 28g GA-0197 1.5” black 35g

Azonic Headlock II

Cinelli/Columbus Carbon Steerer Expander

Deda Elementi Spadca Carbon Steerer Expander Plug

FSA Compressor Cap for Carbon Steerer

FSA Compressor Pro Carbon

FSA Carbon Top Cap

Gravity Whip It Top Cap

674

COM

PO

NEN

TS

& PA

RTS

Bearings

Brakes

Cables & Casing


Chains & Guides

Chainrings & Guards


Derailleurs

Fasteners

Forks & Shocks

Grips & Tape


Headsets

Hubs

Pedals

Rims

Saddles

Seatposts

Shifters

Spokes

Stems

Tires

Tubes & Tube Care

Wheels

headsets accessories

Gusset Universal HeadlockReplaces the star nut in threadless headsets for added security•Set includes alloy top cap and bottom T-nut to fit 1-1/8”, plus 3 different •length CrMo bolts to fit most bikes. 95g (with short bolt option)Bolt lengths: 225mm (50mm threads) 243mm (60mm threads) 295mm •(60mm threads)

part# description GU-6981 headset compression device

Interloc OPS Locking Headset SpacerSimple headset spacer with a clamp on it•For use when removing a stem and not •losing the headset adjustment or pre-load

part# description stack height color RD-1906 locking headset spacer 10mm black

Niner Y.A.W.Y.D. Top CapYou Are What You Drink cap replaces any 1-1/8” threadless headset top cap•Built-in lip accepts a bottle cap from your favorite beer bottle•

part# size color NE-9371 1-1/8” black

Woodman Capsule PHReuseable threadless headset preload device for 1-1/8” carbon steerers•Dual wedge expander sleeve offers greater contact area which •reinforces the steerer tube against stem clamping loadsGrooved sleeve will not slip, even under strong vibrations•Includes 7075 aluminum bolt and an elastomer to prevent overtightening•Choose carbon fiber or aluminum top cap•

part# size cap weight WN-3311 1-1/8” carbon steerer carbon fiber 39g WN-3313 1-1/8” carbon steerer black aluminum 42g

Woodman Capsule Extrem Headset LockReplace star nut with headset compression device•Fits threadless steerers from 175mm to 270mm•All aluminum construction to save weight•6mm threaded hole in base for fender attachment•80g•

part# size color WN-3351 1-1/8” black

Woodman Steerer/Headset Shipping ClampSecures a threadless fork and headset in the frame when •you remove your stem for traveling/shipping purposesPrevents loss of headset parts or other damage caused •by a loose fork in transitOnce headset tension is set you can leave the clamp installed, allowing you •to remove the stem anytime without any effect on headset adjustment

part# description size color WN-3881 steerer/headset shipping clamp 1-1/8” black

Gusset Universal Headlock

Interloc OPS Locking Headset Spacer

Niner Y.A.W.Y.D. Top Cap

Woodman Capsule PH

Woodman Capsule Extrem Headset Lock

Woodman Steerer/Headset Shipping Clamp

675

Bearings

Brakes

Cables & Casing


Chains & Guides

Chainrings & Guards


Derailleurs

Fasteners

Forks & Shocks

Grips & Tape


Headsets

Hubs

Pedals

Rims

Saddles

Seatposts

Shifters

Spokes

Stems

Tires

Tubes & Tube Care

Wheels

CO

MP

ON

ENTS

& P

AR

TS

reducers & spacers headsets

FSA 1.5” Headtube Reducer CupsAdapts OnePointFive headtube frames to accept any standard (non-•integrated type) 1-1/8” headset or forkCNC machined, anodized, laser etched. Sold as pair•BTI also offers a variety of FSA 1.5” to 1-1/8” reducer headsets•

part# adapts color FS-595 1.5” to 1-1/8” black

Identiti DaleDucers HeadShok ReducerFor use in converting Cannondale HeadShok frames to accept any •standard (non-integrated type) 1-1/8” headset or forkSold as a pair, headset sold separately•Dimensions: 49.5mm OD x 34mm ID (10mm insertion depth)•

part# adapts color DD-9950 Cannondale HeadShok to 1-1/8” black

Wheels Headtube Reducer ShimsMachined aluminum shims allow fitting headsets into larger diameter headtubes•Sold as pair•

part# adapts color WZ-1399 1.5” to 1-1/8” black WZ-1814 1-1/4” to 1-1/8” black WZ-1018 1-1/8” to 1” black

Cane Creek Carbon Interlok Spacers

Carbon fiber headset spacers with interlocking flange and groove •system provides a more secure, stiffer front end/steering setupDC-2121: use 5mm Top for flush, flangeless interface with bottom of stem•

part# ID size color DC-2121 1-1/8” 5mm (top) carbon DC-2122 1-1/8” 5mm carbon DC-2124 1-1/8” 10mm carbon

Cane Creek 110 Series Interlok SpacersColor matched aluminum Interlok spacers for the 110 Series headsets•

part# ID size color DC-2130 1-1/8” 2.5mm black DC-2131 1-1/8” 2.5mm silver DC-2132 1-1/8” 2.5mm blue DC-2133 1-1/8” 2.5mm red DC-2134 1-1/8” 5mm black DC-2135 1-1/8” 5mm silver DC-2136 1-1/8” 5mm blue DC-2137 1-1/8” 5mm red DC-2138 1-1/8” 10mm black DC-2139 1-1/8” 10mm silver DC-2140 1-1/8” 10mm blue DC-2141 1-1/8” 10mm red

Cane Creek Nylon Interlok SpacersNon-creaking injection molded Nylon spacers with interlocking flange •and groove system improves front end stiffness/steering precisionDC-2201: use 5mm Top for flush interface with bottom of stem, where the •linking flanges will face up, allowing use with non-Cane Creek headsetsDC-2202: use 5mm Inverted Top for flush interface with bottom of stem, •where the linking flanges will face down, so that the bottom spacer connects with the groove in any Interlok compatible Cane Creek headset

part# ID size color DC-2201 1-1/8” 5mm (top) black DC-2202 1-1/8” 5mm (inverted top) black DC-2204 1-1/8” 5mm black DC-2206 1-1/8” 10mm black

Cane Creek CarbonInterlok Spacers

Cane Creek Nylon Interlok Spacers

FSA 1.5” Headtube Reducer Cups

Identiti DaleDucers HeadShok Reducer

Wheels Headtube Reducer Shims

Cane Creek 110 Series Interlok Spacers

676

COM

PO

NEN

TS

& PA

RTS

Bearings

Brakes

Cables & Casing


Chains & Guides

Chainrings & Guards


Derailleurs

Fasteners

Forks & Shocks

Grips & Tape


Headsets

Hubs

Pedals

Rims

Saddles

Seatposts

Shifters

Spokes

Stems

Tires

Tubes & Tube Care

Wheels

headsets spacers

Cane Creek Integrated Headset Shims

Shims used to adjust the depth of the machined headtube in •order to ensure a correct fit for most Integrated System headsetsRecommended for use between top cover and compression •ring to prevent the top cover from coming into contact with the top of the headtube

part# ID thickness color DC-3152 1-1/8” 0.25mm silver DC-3153 1-1/8” 0.50mm silver

Straitline SC Headset Spacer KitsPrecision CNC machined and color anodized with laser-etched graphics•1-1/8” spacers are straightwall, where the 1.5” spacers •are externally machine-butted to reduce weight1-1/8” kits include: (1ea) 3mm, 6mm, 12mm, and 25mm spacers•1.5” kits include: (1ea) 3mm, 6mm & (2ea) 12mm spacers•

part# size color ST-3020 1-1/8” pink ST-3022 1-1/8” black ST-3024 1-1/8” Ti grey ST-3026 1-1/8” blue ST-3028 1-1/8” red ST-3030 1-1/8” bronze ST-3032 1-1/8” orange ST-3050 1.5” pink ST-3052 1.5” black ST-3054 1.5” Ti grey ST-3056 1.5” blue ST-3058 1.5” red ST-3060 1.5” bronze ST-3062 1.5” orange

Thomson Stem CapMachined aluminum with three Thomson logos circling the cap•Designed for use with the 31.8mm X4 and X2 stems•

part# size color package TP-10121 1-1/8” black each TP-10122 1-1/8” silver each

Torelli Aluminum Headset SpacersMachined aluminum spacers for tuning bar and stem height•Relieved inside for weight reduction•

part# ID size color TI-9621 1-1/8” 5mm black TI-9623 1-1/8” 10mm black TI-9625 1-1/8” 15mm black TI-9627 1-1/8” 20mm black

Vuelta Carbon Headset SpacersCarbon spacers for tuning bar and stem height•

part# ID size color VL-4421 1-1/8” 2.5mm carbon VL-4423 1-1/8” 5mm carbon VL-4425 1-1/8” 10mm carbon VL-4427 1-1/8” 15mm carbon VL-4429 1-1/8” 20mm carbon

Cane Creek Integrated Headset Shims

Thomson Stem Cap

Torelli Aluminum Headset Spacers

Straitline SC Headset Spacer Kits

Vuelta Carbon Headset Spacers

677

Bearings

Brakes

Cables & Casing


Chains & Guides

Chainrings & Guards


Derailleurs

Fasteners

Forks & Shocks

Grips & Tape


Headsets

Hubs

Pedals

Rims

Saddles

Seatposts

Shifters

Spokes

Stems

Tires

Tubes & Tube Care

Wheels

CO

MP

ON

ENTS

& P

AR

TS

spacers & service parts headsets

Vuelta Aluminum Headset Spacers

Machined aluminum spacers for tuning bar and stem height•part# ID size color VL-41021 1” 2.5mm black VL-41022 1” 2.5mm silver VL-41051 1” 5mm black VL-41052 1” 5mm silver VL-41101 1” 10mm black VL-41102 1” 10mm silver VL-41201 1” 20mm black VL-41202 1” 20mm silver VL-42021 1-1/8” 2.5mm black VL-42022 1-1/8” 2.5mm silver VL-42051 1-1/8” 5mm black VL-42052 1-1/8” 5mm silver VL-42101 1-1/8” 10mm black VL-42102 1-1/8” 10mm silver VL-42201 1-1/8” 20mm black VL-42202 1-1/8” 20mm silver

Wheels Carbon Fiber Headset Spacer

Black carbon fiber weave headset spacers for tuning ride height•Kit includes 1-1/8” spacers: 10) 2.5mm, •20) 5mm, 10) 10mm, 1) 15mm, 2) 20mmPacks (1” and 1-1/8”) include 2.5mm, 5mm and 10mm•

part# size color package WZ-1406 1-1/8” x 2.5mm carbon each WZ-1407 1-1/8” x 5mm carbon each WZ-1408 1-1/8” x 10mm carbon each WZ-1409 1-1/8” x 15mm carbon each WZ-1410 1-1/8” x 20mm carbon each WZ-1411 1-1/8” x 40mm carbon each WZ-1430 1-1/8” kit carbon 62/box

Wheels Aluminum Headset SpacerMachined aluminum spacers for tuning ride height•1” kit includes storage box, 10 different keyed and non-keyed spacer •sizes: (20) 1.5mm silver, (20) 2mm silver keyed, (20) 2.5mm silver, (15) 2.5mm black, (15) 5mm silver, (10) 5mm black, (5) 7.5mm silver, (3) 10mm silver, (3) 15mm silver, (3) 20mm silver1-1/8” kit includes storage box, with selection of non-keyed spacers: •(15) 1.5mm silver, (15) 1.5mm black, (15) 2.5mm silver, (15) 2.5mm black, (15) 5mm silver, (15) 5mm black, (5) 7.5mm silver, (5) 7.5mm black, (5) 10mm silverPacks include: (1) 2.5mm, (1) 5mm, (1) 7.5mm, (1) 10mm•

part# size color package WZ-1201 1” kit silver and black 117/box WZ-1301 1-1/8” kit silver and black 110/box WZ-1220 1” pack black 4/bag WZ-1221 1-1/8” pack black 4/bag WZ-1395 1.5” x 5mm black each WZ-1396 1.5” x 10mm black each

Aheadset Bearings

Replacement retainer or cartridge bearings for Aheadsets•DC-2039: stainless steel bearings can also be used to upgrade S2,ZS2,IS2•

part# description fits model package DC-2030 1-1/8” retainer bearing SAS, STS box/10 DC-2037 1-1/8” stainless steel cartridge bearing 110 each DC-2038 1-1/8” standard cartridge bearing S2, ZS2, IS2 pair DC-2039 1-1/8” stainless steel cartridge bearing S6, ZS6, IS6 pair

Aheadset TF3 Hollow Preload BoltAheadset preload adjusting bolt, cap and star nut•Bolt is hollow for cable pass-through•

part# description color DC-3059 headset preload assy w/ hollow bolt black

Wheels AluminumHeadset Spacer

Wheels Carbon FiberHeadset Spacer

Vuelta Aluminum Headset Spacers

Aheadset Bearings

Aheadset TF3 Hollow Preload Bolt

678

COM

PO

NEN

TS

& PA

RTS

Bearings

Brakes

Cables & Casing


Chains & Guides

Chainrings & Guards


Derailleurs

Fasteners

Forks & Shocks

Grips & Tape


Headsets

Hubs

Pedals

Rims

Saddles

Seatposts

Shifters

Spokes

Stems

Tires

Tubes & Tube Care

Wheels

headsets service parts

Aheadset Star NutsSteel star fangled nuts for anchoring headset compression in steerer•

part# description DC-3051 Star nut, 1” aluminum steerer DC-3053 Star nut, 1” steel (some 1-1/8” aluminum) DC-3055 Star nut, 1-1/8” steel (some 1-1/4,1-1/8” alum) DC-3057 Star nut, 1-1/4” steel (some 1-1/4” aluminum) DC-3058 Star nut, 1.5” threadless

Cane Creek AngleSet Replacement Parts

Replacement parts specifically for the AngleSet headsets•part# description DC-1450 ZS44 0.0 degree offset top cup DC-1451 ZS49 0.0 degree offset top/bottom cup DC-1452 ZS49 0.5 degree offset top/bottom cup DC-1453 ZS49 1.0 degree offset top/bottom cup DC-1454 ZS49 1.5 degree offset top/bottom cup DC-1455 TR49 0.0 degree offset bottom cup DC-1456 ZS56 0.5 degree offset bottom cup DC-1457 ZS56 1.0 degree offset bottom cup DC-1458 ZS56 1.5 degree offset bottom cup DC-1459 gimbal - 41mm for 1.25” bearings DC-1460 gimbal - 52mm for 1.5 bearings (TR49/40 only) DC-1461 AngleSet 1-1/8” top cap

Cane Creek / Aheadset Service PartsCrown races and compression rings for servicing •Cane Creek headsets and Aheadsets

part# fits model size DC-2000 SAS, STS, AL 30.0mm race DC-2005 XCII 1.5” >>> works with XX II lower 1.5” cup for a 1.5” steererDC-2006 XCII 1.5”>1 1/8” (reducer) >>> works with XXC II and ZSII lower 1.5” cup for a 1 1/8” steerer (reducer)DC-2013 1-1/8” 110 compression ring DC-2014 110 30.0mm race DC-2017 IS2, IS6, S6, S2,S3 30.0mm race >>> race fits IS2, IS6, S6, S2,S3 and S8DC-2018 IS2i, IS8i 30.0mm race

FSA Headset Bearingspart# fits model size description bearing (size) FS-5111 Orbit X and 1-1/8” micro angular MR049

upper Pig DH Pro cartridge bearing (36 x 36 deg) FS-5115 Orbit IS and Orbit ZS 1-1/8” angular cartridge bearing MR054 (36 x 45 deg) FS-5119 Orbit Xtreme Pro 1.5” industrial cartridge bearing MR069 FS-5121 Orbit DL and upper Pig 1-1/8” caged bearing MR014 (5/32” x 22) FS-5123 lower Pig 1-1/8” caged bearing MR016 (1/4” x 15) FS-5125 lower Pig DH-Pro 1-1/8” industrial cartridge bearing MR029 FS-5127 Big Fat Pig 1.5” caged bearing MR068 (7/32” x 20)

FSA Headset Crown Racespart# description fits model size FS-526 crown race Orbit X 1-1/8” FS-5265 crown race Orbit-Z 1-1/8” FS-5269 crown race Orbit Xtreme-Pro 1.5” FS-5278 crown race Pig 1-1/8” FS-528 crown race Pig DH-Pro 1-1/8” FS-5281 crown race Big Fat Pig 1.5”

Woodman Headset Service PartsWoodman’s proprietary full compliment cartridge bearing (no retainer)•Choose 36/45 degree (Cane Creek drop-in) 45/45 degree •(Campy drop-in, Zero Stack press-fit)WN-3951: replacement aluminum crown race for Axis SL Comp (not SPG)•

part# description fits model package WN-3943 36/45 cartridge bearing, 1-1/8” ICR pair WN-3945 45/45 cartridge bearing, 1-1/8” Axis-SL, IC, SICR pair WN-3951 crown race ring, 1-1/8” Axis SL Comp each

Cane Creek / Aheadset Service Parts

Cane Creek AngleSet Replacement Parts

Aheadset Star Nuts

FSA Headset Bearings

Woodman Headset Service Parts

FSA Headset Crown Races

Documents

657 headsets