Stand alone MFU running onPhilips P8 PLC
Automatic control on
Turbidity, Temperature, Pressure and Flow
20-25 m3/hrpurified process or waste water
Automaticcleaning program
of membranes
DimensionsLxWxH
470x160x360 m
Liquid purifiedfrom solids
below ppm level
Description of use
Microfiltration is worldwide used to clean process water, waste
water or to concentrate a flow with particles. These
microfiltration units (MFU) are designed for an electro chemical
machining (ECM) factory to separate metal hydroxides out of a
saline solution with 20-25 m3/hr. By this filtration step it is
possible to reuse the process water continuously. The quality of
the reused process water is very high with a particle content below
ppm level. The units can be used in a pH range of 2-12 at a
capacity of 20-25 m3/hr or 2 separate systems of 10-12m3/hr.
The field of use for these used units are:
�electrolyte regeneration of an ECM process
�regeneration of galvanic process water
�general process/ waste water treatment to remove particles
(solids) for upgrade or reuse
For your specific application you can always contact ECM
Technologies
Description of microfiltration
Microfiltration is based on the separation of particles and
liquid by exclusion by pressure and pore size of the membrane. The
particles are retained by the membrane and are concentrated in the
circulation loop. The liquid is transported through the membrane by
a pressure drop.
The automatic, stand alone running microfiltration unit (MFU) is
equipped with a turbidity measurement to control a constant
concentration of particles in the loop. An automatic back flush
prevents blocking of the pores of the membranes and an automatic
chemical cleaning program guarantees the continuous purified liquid
flow.
Special trade price:
� 15.000,00
excluding VAT, support, transport and
handling
