ACE9000 B-1Single-Phase Prepayment Electricity Meter
ACE9000 B-1 is the single phase prepayment meter fully designed
to fulfi ll the requirements of IEC62052-11, IEC62053-21 and STS
standards.
PROTECTION
The ACE9000 B-1 meter is manufactured using Itron’s advanced
technology and high quality component materials in order to ensure
long-term functionality and accuracy. Specially designed resistance
and protection features protect the meter from dust and liquid
damage in accordance with the IP54 protection standard.
The ACE9000 B -1 is also equipped with advanced anti-tamper
protection. In the event of tampering, the meter will continue
counting the energy consumption based on class limit. The register
will be automatically protected and will record a missing energy
measurement as a result of tampering or actual energy theft.
Visually, the yellow LED and the LCD will be activated every time
the meter detects tampering or energy theft and it will continue
indicating until the meter gets a clear tamper signal. The meter
will not accept any credit while in tamper alarm mode.
The meter is designed with a magnetic sensor used to activate
the LED tamper and LCD display each time the meter indicates an
external magnetic force. In this case, the meter will keep
measuring the energy usage based on the class 1 standard meter
specifi cations.
BENEFITS AND FEATURES
The meter is outfi tted with a physical tamper detection switch.
In the event of a physical tamper, the meter automatically records
the tampering but will not until the credit reaches zero. A clear
tamper token is required before credit can be added and the load
reconnected.
An optical probe interface is available to get access to the
information stored in the meter as well as to give direct access to
the meters data bus.
For ease of use, all Itron ACE9000 B-1 meters provide:
» LED for tamper indication (yellow) » LED for credit
indication, (red for low credit and green for suffi cient credit).
The low credit warning limit can be confi gured by the utility
» LED for consumption (red) » LCD for the display of
information
The numeric keypad provides both tactile and audible feedback.
The acceptance or rejection of a token is shown on the LCD. In
addition the meter records the last fi ve tokens entered.
LCD DISPLAY
KEY BENEFITS
» Maximum current of 80A with Class1 accuracy
» Anti Tamper features » Asymmetrical (DIN) terminal or
Symmetrical (BS) terminal arrangement
» Physical tamper switch » 20 Digit STS with encryption »
Optical port for data bus output » Keypad with 4x3 confi
guration
» Power bar indicator » Reverse current indicator » Tamper
indicator » Contractor open indicator
SPECIFICATIONS knowledge to shape your future
L L N N
L N N L
DIMENSIONSTechnical Specifi cationsMeter Type Prepayment Single
Phase meter
Standard SPLN D3.009-1 : 2010 IEC 62052-11:2003 ; IEC
62053-21:2003
Network Single Phase 2 wires
Measuring Scope Active Energy
Class Index Class 1
Reference voltage & Frequency
120V 60Hz & 220V, 230V, 240V 50Hz/60Hz
Operating Voltage Range - 30% Un to +15% Un
Power Consumption
