1
ADC 5000 Series Battery charger/Power supply 12, 24, 48 VDC output voltage 60, 125 and 250W output power DIN rail or base plate mounting Switch mode technology Temperature compensated charging voltage Alarm relay ADC 5000 is a series of compact and stable power supplies suitable for all types of industrial application. Suitable for battery chargers with very low ripple, built-in series diode and temperature regulated output voltage. LED indication for supply output voltage. Stable, mechanical construction, high efficiency, and convection cooling ensure long service life. Available with 12, 24, and 48 VDC output voltage. Manufacturer POWERNET. ADC type 1) Voltage Nominal Voltage Battery Charger Voltage Power Supply Current Dimensions [VDC] [VDC] [VDC] [A]* WxHxD [mm] 56xy (60W) 50xy (125W) 53xy (250W) 12 12 12 13.7 13.7 13.7 10.5…15 9…15 9…15 5 10 20 50x120x80 66x148x113 75x172x122 57xy (60W) 51xy (125W) 54xy (250W) 24 24 24 27.4 27.4 27.4 21…29 21…29 21…29 2.5 5 10 50x120x80 66x148x113 75x172x122 58xy (60W) 52xy(125W) 55xy (250W) 48 48 48 54.8 54.8 54.8 45…58 45…58 45…58 1.25 2.5 5 50x120x80 66x148x113 75x172x122 Technical Specifications *Max. current limit is approx. 10% higher than nominal W 0 5 2 W 5 2 1 W 0 6 : r e w o P Voltage: 12VDC 24VDC 48VDC 12VDC 24VDC 48VDC 12VDC 24VDC 48VDC Input (AC): 90…264VAC/45…65Hz 94…132VAC or 184…264VAC (reverser)/45…65Hz Ripple [mVDC rms]: Regulation, 0…90%: Hold-up time [ms]: <15 <1.5% >50 <10 <0.5% >50 <10 <0.5% >50 <15 <1.0% >20 <10 <0.5% >20 <10 <0.5% >20 <15 <1.0% >20 <10 <0.5% >20 <10 <0.5% >20 K O t u p t u o C D = D E L n e e r G : n o i t a c i d n I Alarm relay: Power fail/low output voltage: Potential free change-over switch, 24VDC/0.3A or 30VAC/0.5A g n i t a r e d t u o h t i w r e w o p l l u f t a C ° 5 5 + 0 4 - : e g n a r e r u t a r e p m e T ) d e s o l c n e r o t c e n n o c ( ² m m 5 . 2 x a m , s p m a l c / s r o t c e n n o C : n o i t c e n n o C Labelling: EN 60950 class 1, EN 55022 class B, ETS 300 019-2-4 class 4 M5 0 2 P I , m u i n i m u l a / l e e t s d e t a r o f r e P : e r u s o l c n E X selection code 2 = Power supply/DIN rail 8 = Battery charger/DIN (incl. temp. sensor) 3 = Power supply/Wall 9 = Battery charger/Wall (incl. temp. sensor) Y selection code 1 = Alarm relay (standard) 3 = Alarm relay + series diode Tel: +358 20 753 3200 Fax: +358 20 753 3205 Email: [email protected] http:// www.vamp.fi We reserve the rights to product alterations without prior notice. Copyright © Vamp Ltd. All trademarks are the property of their respective holders. Vamp Ltd P.O.Box 810 FI-65101 VAASA Finland Visiting address: Vaasa Airport Park Yrittäjänkatu 15 Vaasa, Finland ISO 9001:2000 certified company TE R DeutschlandGmbH Grützmühlenweg 40 22339 Hamburg Fon 040/53 80 92-50 Fax 040/53 80 92-85 E-mail: [email protected] http: //ww w.ter-deutschland.de

ADC 5000 Series Battery charger/Power supply - Wind … Supply ADC5000.… · ADC 5000 Series Battery charger/Power supply • 12, 24, 48 VDC output voltage • 60, 125 and 250W output

  • Upload
    tranque

  • View
    225

  • Download
    2

Embed Size (px)

Citation preview

Page 1: ADC 5000 Series Battery charger/Power supply - Wind … Supply ADC5000.… · ADC 5000 Series Battery charger/Power supply • 12, 24, 48 VDC output voltage • 60, 125 and 250W output

ADC 5000 Series Battery charger/Power supply

• 12, 24, 48 VDC output voltage • 60, 125 and 250W output power • DIN rail or base plate mounting • Switch mode technology • Temperature compensated charging voltage • Alarm relay

ADC 5000 is a series of compact and stable power supplies suitable for all types of industrial application. Suitable for battery chargers with very low ripple, built-in series diode and temperature regulated output voltage. LED indication for supply output voltage. Stable, mechanical construction, high efficiency, and convection cooling ensure long service life. Available with 12, 24, and 48 VDC output voltage. Manufacturer POWERNET.

ADC type1) VoltageNominal

VoltageBattery Charger

VoltagePower Supply

Current Dimensions

[VDC] [VDC] [VDC] [A]* WxHxD [mm] 56xy (60W) 50xy (125W) 53xy (250W)

121212

13.713.713.7

10.5…159…159…15

51020

50x120x80 66x148x113 75x172x122

57xy (60W) 51xy (125W) 54xy (250W)

242424

27.427.427.4

21…2921…2921…29

2.55

10

50x120x80 66x148x113 75x172x122

58xy (60W) 52xy(125W) 55xy (250W)

484848

54.854.854.8

45…5845…5845…58

1.252.5

5

50x120x80 66x148x113 75x172x122

Technical Specifications *Max. current limit is approx. 10% higher than nominal W052 W521 W06 :rewoP

Voltage: 12VDC 24VDC 48VDC 12VDC 24VDC 48VDC 12VDC 24VDC 48VDCInput (AC): 90…264VAC/45…65Hz 94…132VAC or 184…264VAC (reverser)/45…65Hz

Ripple [mVDC rms]: Regulation, 0…90%: Hold-up time [ms]:

<15<1.5% >50

<10<0.5% >50

<10<0.5% >50

<15<1.0% >20

<10<0.5% >20

<10<0.5% >20

<15<1.0% >20

<10<0.5% >20

<10<0.5% >20

”KO“ tuptuo CD = DEL neerG :noitacidnIAlarm relay: Power fail/low output voltage: Potential free change-over switch, 24VDC/0.3A or

30VAC/0.5A gnitared tuohtiw rewop lluf ta C°55+…04- :egnar erutarepmeT

)desolcne rotcennoc( ²mm5.2 xam ,spmalc/srotcennoC :noitcennoCLabelling: EN 60950 class 1, EN 55022 class B, ETS 300 019-2-4 class 4 M5

02PI ,muinimula/leets detarofreP :erusolcnE

X selection code 2 = Power supply/DIN rail 8 = Battery charger/DIN (incl. temp. sensor) 3 = Power supply/Wall 9 = Battery charger/Wall (incl. temp. sensor)

Y selection code 1 = Alarm relay (standard) 3 = Alarm relay + series diode

Tel: +358 20 753 3200Fax: +358 20 753 3205Email: [email protected]:// www.vamp.fi

We reserve the rights to product alterations without prior notice.Copyright © Vamp Ltd. All trademarks are the property of their respective holders.

Vamp LtdP.O.Box 810FI-65101 VAASAFinland

Visiting address:Vaasa Airport ParkYrittäjänkatu 15Vaasa, Finland

ISO 9001:2000certified company

TE R Deutschland GmbHGrützmühlenweg 4022339 HamburgFon 040/53 80 92-50Fax 040/53 80 92-85E-mail: [email protected]: //ww w.ter-deutschland.de