Advance PTZ Operating GuideAdvance PTZ Operating Guide

Get Started!Get Started!

click PTZ on

site server panel

4 Modes4 ModesBasic/ Advance/ Auto/ CustomBasic/ Advance/ Auto/ Custom

• click to choose one from 4 different modes

Pre-Use SettingsPre-Use Settings

• click on PTZ pop-up panel

Pre-Use SettingsPre-Use Settings

• Enable each PTZ camera connected to DVR machine

• Select PTZ protocol

Pre-Use SettingsPre-Use Settings

• set the ID on PTZ camera first then key the ID e.g. 1,2,3…in the address box and coordinated PTZ type to the ID

Basic ModeBasic Mode

• Default is Basic mode• now the PTZs can be

used in basic pan / tilt functions and set preset positions for each PTZ

How to use basic modeHow to use basic mode

• Click to select PTZ camera in operation

• means no PTZ camera attached

Basic Mode Basic Mode

• press to maneuver PTZ camera

• press to stop panning / tilting

Basic ModeBasic Mode

• press to zoom-in / zoom-out

• press to stop zooming

Preset PositionPreset Position• right-click mouse

pad• key a name in the

1st preset button box for camera1

• apply this method to each preset button for each camera

Door Way

Preset PositionPreset Position

Change to Advance ModeChange to Advance Mode• click to choose

advance mode• then select Advance

Advance ModeAdvance Mode

• the functions such as Iris, Focus are enabled according to the speed dome built-in protocols not DVR software itself

CAMERA1Iris

Focus

Pan speed

Tilt speed

Advance ModeAdvance Mode

• select camera

Advance ModeAdvance Mode

• adjusting Iris by pressing and is for auto iris adjustment

• adjusting Focus by pressing and is for auto focus adjustment

CAMERA1Iris

Focus

Pan speed

Tilt speed

Advance ModeAdvance ModeAdjustAdjust panning speed panning speed

• press to adjust panning speed

• press to reset default panning speed

Advance ModeAdvance ModeAdjust tilting speedAdjust tilting speed

• press to

adjust tilting speed• press to reset

default panning

speed

Auto ModeAuto Mode

• auto looping

• auto panning

Auto ModeAuto Mode

• press to select Auto mode

CAMERA1Iris

Auto ModeAuto Mode

Select Auto Mode Select Camera

Auto ModeAuto Modeauto loopingauto looping

• enter integer numbers from 1..8 for a camera that positions have been set e.g. 1 2 3… (space between numbers is required)

• set time interval e.g. 5

press to enable

1 2 3

5

CAMERA1

1 2 3

Auto State ChangingAuto State Changing

1st , 2nd preset positions whichwere defined earlier on

Auto State ChangingAuto State Changing

3rd preset position whichwas defined earlier on

Auto PanningAuto Panning

• set camera to desired left-point and right-point

• press to start auto panning • when the camera is panning on the

wrong side, click to invert• increase / decrease / default

panning speed

Another Thing to RemindAnother Thing to Remind

• reset speed dome to original manufacture setting when encountering speed dome abnormal problems

CustomCustom

• speed domes may have more built-in functions than advance PTZ accommodates

Custom SettingCustom Setting

• by enabling those functionalities, we can make PTZ more versatile

Custom SettingCustom Setting

• click to bring up dialog box

• designate it a description

• key in the protocol given by the speed dome manufacturer

• press to enableSpeed Dome ProtocolDescription

Other Things to RemindOther Things to Remind using joystick to control Speed Domeusing joystick to control Speed Dome

• select the joystick detected

• move cursor to each empty box then press buttons on joystick of your own favor

DemonstrationsDemonstrations

• assign each button to each dialog box

• beware of running out free buttons

• use a game pad with at least 11 number buttons

Other Things to RemindOther Things to Remindusing Keyboard to control Speed Domeusing Keyboard to control Speed Dome

• tick the box to enable keyboard operation

• move cursor to each empty box then press keyboard buttons of your own favor

DemonstrationsDemonstrations