Advantys® STBHigh Density Discrete I/O Modules

AGP - English 2

Advantys® STB

Advantys STB delivers customer value in distributed I/O

SmartBuilt-in intelligence and comprehensive system software

SimpleEasy to design, install and maintain

OpenThe ideal device integration I/O solution

FlexibleModular design to perfectly meet your needs

Simply Smart products are going to amaze you !

The new Advantys STB High Density Discrete I/O modules are based on these values

AGP - English 3

Advantys® STB

Introducing 2 new Advantys STB I/O Modules Model STBDDI3725 is the new 16 point,

24 VDC Basic Digital Input Module. Model STBDDO3705 is the new 16

point, 24 VDC Basic Digital Output Module.

Accessories for the New Modules include:

Model STBXTS1180, screw type high density connector set.

Model STBXTS2180, spring type high density connector set.

Model STBXBA3000, Size 3 I/O Base

AGP - English 4

Advantys® STB

Market Values of High Density I/O

• Higher I/O Point Density per Module

• Panel Space Savings, Fewer Modules Required

• Lower System Cost per I/O Point

• Increases I/O Capacity per Island

• Uses existing Advantys STB NIMs and Accessories

• Can Be Mixed with all other Advantys Products in an Island

For systems with High I/O point requirements

AGP - English 5

Advantys® STB

Product Specifications Model STBDDI3725 Input Module

Number of Points 16 Digital Inputs4 Input groups- 4 inputs/group

Input Voltage 24 VDCType of Signal True High, Sink

IEC 1131 Type 3ON State Voltage +11 to 30 VDCOFF State Voltage –3 to 5 VDCON State Current 2.0 mA Min. @11 VDCOFF State Current 1.5 mA Max.Max. Input Voltage 35 VDC for 1.3 mSResponse Time 2 mS ON to OFF

2 mS OFF to ONConnection 2 and 3 Wire Devices

AGP - English 6

Advantys® STB

Product Features

Model STBDDI3725 Input Module

IEC Type 3 Inputs Compatible with wide range of inputdevices, both solid state and mechanical contact

Power to Field Sensors Reduces field wiring and cost

Plug and Play Functionality Modules Auto-Configure when plugged into system – no software needed

Hot Swap Capability Using Standard Type NIMs, modules will automatically start upwhen plugged into system

2 & 3 Wire Input Devices Module connector includes 4 connections for Sensor power (-) to power 3 wire devices

AGP - English 7

Advantys® STB

Product Specifications

Model STBDDO3705 Output Module

Number of Points 16 Digital Outputs 2 Output groups- 8 outputs/group

Output Voltage 19.2 to 30 VDCOutput Type True High, SourceMax. Load Current 0.5 Amps per Point

4 Amps per ModuleProtection Short Circuit ProtectionON State Voltage Drop 0.4 VDC per PointOFF State Leakage 0.4 mA @ 30 VDC per PointResponse Time 2 mS ON to OFF

2 mS OFF to ONConnection 2 Wires per Output Point

AGP - English 8

Advantys® STB

Product Features

Model STBDDO3705 Output Module

Output Protection Solid State Short Circuit Protection with Auto-recovery – no fuses needed

Output Fail State Outputs Fail Safe (OFF State) onloss of communication between module and fieldbus master

Power to Field Devices Reduces field wiring and cost

Plug and Play Functionality Modules Auto-Configure when plugged into system – no software needed

Hot Swap Capability Using Standard Type NIMs, modules will automatically start upwhen plugged into system

AGP - English 9

Advantys® STB

Product Features - Accessories Field Wiring Connector – Model STBXTS1180

Screw Terminal Type 18 Terminals per Connector

2 Connectors per Package Max. wire size, 16 AWG, 1.5mmStranded or Solid Wire

Field Wiring Connector – Model STBXTS2180

Spring Terminal Type 18 Terminals per Connector

2 Connectors per Package Max. wire size, 1.5mm (16 AWG) wireSolid Wire

I/O Base – Model STBXBA3000

Size 3 I/O Base

AGP - English 10

Advantys® STB

Put I/O precisely where you need it

Locate an extension module at the end of each island segment and the system’s network communications are delivered to the next segment.

Since only one Network Interface Module is needed for the entire configuration, system setup is simplified and costs are minimized.

With only 1 NIM, you can have up to 7 segments across 15 meters.

I/O granularity 2 , 4 ,6 or 16 channels

Increased Flexibility

AGP - English 11

Advantys® STB

I/O solutions for a wide range of applications

Advantys STB High Density I/O is ideal for distributed applications such as:

Material Handling & Conveying Belt conveyors, Special overheads, Cranes, Lifts, Electrical trucks

Packaging Blistering, Palletizing

Textile Weaving machines, Spinning machines

Food & Beverage Filling and bottling, FFS machines, Conveying, Storage systems, Packaging machines

Automotive Body shop, Painting, Assembly linesBooster with multiple pumps

Vertical boxing machine Mobile shelvingAssembly line/ conveyorVertical carousel

Where there is a high number of I/O Points

AGP - English 12

Advantys® STB

Advantys Telefast means greater simplicity wiring in your automation system equipment. Save up to 33% of wiring time!

Advantys Telefast provides greater flexibility in the selection of input and output voltage ranges and output types

 Applications:

   All types of industrial applications

Use Advantys Telefast ABE 7 to Simplify your wiring !

AGP - English 14

Advantys® STB

for your attentionThanks Thanks