AIRBUS H145/EUROCOPTER EC145 The Airbus H145/Eurocopter EC145 is a twin-engine light utility helicopter

developed and manufactured by Eurocopter. The Airbus H145/Eurocopter EC145 is designed for many diverse demands that require complex electrical wiring systems containing many different connectors, contacts and terminals. Proper maintenance and repair of these electrical systems requires precision tools. To protect your investment, DMC offers a comprehensive maintenance kit to service the wiring systems of this helicopter.

DMC1808 MAINTENANCE KITThe DMC1808 Airbus H145/Eurocopter EC145 Wiring System Service Kit provides a turn-key solution and the tools necessary to strip, crimp, install, and remove the typical contacts and terminals of this wiring system. The DMC1808 kit includes the tool to application cross reference information that indicates the particular tool(s) that should be selected to repair a specific connector, contact, or terminal. In addition, the kit also contains illustrated operating instructions for the designated tooling.

COMPREHENSIVE SOLUTION FOR MAINTENANCE AND REPAIR DMC believes in providing a comprehensive, turn-key solution for electrical wire maintenance and repair. Since these tools, together with their operating instructions, are contained in a single kit, the connector repair can be made in the shortest time possible, thus permitting a rapid return of your aircraft to service. Tool kit supplied in one environmentally sealed cases and includes: Name Plate, Foam Pads/Inserts, Contents Charts, Instruction Sheets, and Tool Selection Charts.

Actual Kit may vary from example shown.Instruction Sheets

Tool Selection Charts

DMC1808AIRBUS H145/EUROCOPTER EC145 Kit

10/20 DMC1808 REV 2 VER 1COPYRIGHT © 2020 Daniels Manufacturing Corp. ALL RIGHTS RESERVED

DANIELS MANUFACTURING CORP., 526 THORPE ROAD, ORLANDO, FL 32824, USAPHONE (407) 855-6161 • FAX (407) 855-6884 • www.dmctools.com • E-MAIL: DMC@dmctools.com

DMC1808 Airbus H145/Eurocopter EC145 Kit

10/20 DMC1808 REV 2 VER 1COPYRIGHT © 2020 Daniels Manufacturing Corp. ALL RIGHTS RESERVED

DANIELS MANUFACTURING CORP., 526 THORPE ROAD, ORLANDO, FL 32824, USAPHONE (407) 855-6161 • FAX (407) 855-6884 • www.dmctools.com • E-MAIL: DMC@dmctools.com

DMC1808AIRBUS H145/EUROCOPTER EC145 Kit

DMC CONNECTOR COVERAGEMANUFACTURER SERIES

MIL-DTL-26482 Series 1 and 2

MIL-DTL-38999 Series 3

AS50151 3100, 3450 Series

MIL-DTL-83723 Series 3

M81824 Environmental Splices

MS20659 Non-Insulated Terminals

MS25036 Insulated Terminals

MIL-STD-1553 DATABUS

Amphenol - Socapex SJT Series

Amphenol - Air LB Terminal Junctions

Deutsch DMC-M Series

ITT Cannon CA Series

Leach Relay Sockets

Souriau 851 Series, 8630 series

Tyco - Amp PIDG, Solistrand, Stratotherm Series

Tyco - Raychem D-436 Series

KIT CONTENTS

6 Crimp Tools

4 Turret Heads

8 Positioners

1 Single Position Head

1 Universal Head

1 Universal Positioner

12 Metal Insertion Tools

11 Metal Removal Tools

63 Plastic Insertion/Removal Tools

4 Contact Gages

2 Unwired Contact Removal Tools w/ Probes

1 Wire Cutter

3 Wire Strippers

2 In-Service Inspection Gages

1 Die Removal Tool

12 Die Sets

1 Hex Wrench

2 Coaxial Cable Strippers

1 Wire Harness Spoon

Coverage: Airframe Power Connectors, Terminals size 12 AWG and Smaller, Coaxial ConnectorsType of Inserts: Unicellular Polyethylene Foam with Die Cut Tool CavitiesType of Construction: 1 Yellow Fiberglass/Aluminum Case

NOTICE: Unless otherwise stated by DMC, tools contained in this kit have been selected based upon their suitability to service the related connector or contact indicated at the time of design. Military Standard tools have been utilized wherever possible. These tools are not necessarily the production tools used to manufacture the aircraft and therefore, these tools may or may not correspond to the tools listed in the OEM wiring manual and/or the Chapter 20 Standard Wiring Practices Manual list of approved tooling. Verification Is Required.

Refurbishment ServicesTo ensure the longevity of your investment, DMC offers kit refurbishment and calibration services. Contact DMC for details.