2
Your partner in energy solutions CG Power Systems Belgium NV (Formerly Pauwels) Automation The Automation Systems Division is a specialist supplier of advanced products and services to the global substation automation market. Our products ensure the secure and reliable automation and control of electricity transmission and distribution assets from 6.6 kV to 400 kV tailored to meet the specific needs of our customers worldwide. The Automation Systems Division’s head office and development centre is based in Dublin and the needs of our global customers are met through wholly- owned project delivery offices in the UK and the USA and a network of approved partners around the world. The Automation Systems Division is a specialist supplier of: > Remote terminal units (RTU) > Substation Control Systems (SCS) > Distribution Automation (DA) equipment and systems > IEC 61850 compliant solutions Services CG offers a full range of after-sales services. These are provided by the CG Services Division, a specialist division within the group that has its headquarters in Charleroi (Belgium) and a subdivision in Hungary. The Services Division installs, maintains, refurbishes and repairs transformers, tap-changers, AIS, GIS and substations worldwide. As a total solutions provider, the Services Division also delivers life extension programs supported by condition based monitoring systems as well as numerous accessories and spare parts for transformers and on-load tap changers. The division operates through group service organizations in Mechelen (Belgium), France, the USA, Saudi Arabia, Indonesia and Curaçao, forming a global network. Automation & services Contact CG Power Systems Belgium NV Antwerpsesteenweg 167, 2800 Mechelen T +32 15 283 333 - F +32 15 283 300 CG Holdings Belgium NV Systems Division Antwerpsesteenweg 167, 2800 Mechelen T +32 15 283 333 - F +32 15 283 491 CG Holdings Belgium NV Services Division Rue Vital Françoisse 220, BP 1581, 6000 Charleroi T +32 71 441 020 - F +32 71 470 189 [email protected] - www.cgglobal.com The CG Systems Division has developed into an important division within the CG group. The Systems Division specializes in electrical turnkey projects and has an impressive list of references covering over 50 countries, ranging from Australia to Zimbabwe. AIS and GIS substations The Systems Division is a specialist in turnkey substation projects up to 500 kV. These projects are carried out for large industrial customers as well as for electricity utilities. Mobile substations and mobile (hybrid) transformers Mobile substations are fully equipped electrical substations mounted on semi-trailers. Fast integration into the network and the ability to reuse them at other locations are the main advantages of these mobile units. In addition to that, the erection and commissioning time of the substation and the civil construction works are reduced to a minimum. That is because the mobile substation is completely pre-assembled and tested at the plant. Our scope ranges from mobile transformers to complete mobile substations with a maximum voltage rating of 220 kV and a maximum output of 80 MVA. Compact substation designs When space is at a premium, the Systems Division provides compact substation solutions such as modular substations. The concept developed by the Systems Division consists of three separate modules: high voltage equipment, power transformer and medium voltage equipment. Each module is mounted on skids. The modules are designed in such a way that transportation is easy and installation times short. They are pre-assembled at the Systems Division’s facilities. Before leaving the factory, the substation is exhaustively tested. Systems Division

AIS and GIS substations CG Power Systems Belgium NV · PDF fileCG Power Systems Belgium NV (formerly Pauwels Trafo Belgium NV) with manufacturing units in Belgium, Ireland, USA, Canada

Embed Size (px)

Citation preview

Page 1: AIS and GIS substations CG Power Systems Belgium NV · PDF fileCG Power Systems Belgium NV (formerly Pauwels Trafo Belgium NV) with manufacturing units in Belgium, Ireland, USA, Canada

Your partner in energy solutions

CG Power Systems Belgium NV(Formerly Pauwels)

Automation

The Automation Systems Division is a specialist supplier of advanced products and services to the global substation automation market. Our products ensure the secure and reliable automation and control of electricity transmission and distribution assets from 6.6 kV to 400 kV tailored to meet the specific needs of our customers worldwide.

The Automation Systems Division’s head office and development centre is based in Dublin and the needs of our global customers are met through wholly-owned project delivery offices in the UK and the USA and a network of approved partners around the world.

The Automation Systems Division is a specialist supplier of:> Remote terminal units (RTU)> Substation Control Systems (SCS)> Distribution Automation (DA) equipment and

systems> IEC 61850 compliant solutions

Services

CG offers a full range of after-sales services. These are provided by the CG Services Division, a specialist division within the group that has its headquarters in Charleroi (Belgium) and a subdivision in Hungary. The Services Division installs, maintains, refurbishes and repairs transformers, tap-changers, AIS, GIS and substations worldwide. As a total solutions provider, the Services Division also delivers life extension programs supported by condition based monitoring systems as well as numerous accessories and spare parts for transformers and on-load tap changers. The division operates through group service organizations in Mechelen (Belgium), France, the USA, Saudi Arabia, Indonesia and Curaçao, forming a global network.

Automation & services

Contact

CG Power Systems Belgium NVAntwerpsesteenweg 167, 2800 MechelenT +32 15 283 333 - F +32 15 283 300

CG Holdings Belgium NVSystems DivisionAntwerpsesteenweg 167, 2800 MechelenT +32 15 283 333 - F +32 15 283 491

CG Holdings Belgium NVServices DivisionRue Vital Françoisse 220, BP 1581, 6000 CharleroiT +32 71 441 020 - F +32 71 470 189

[email protected] - www.cgglobal.com

The CG Systems Division has developed into an important division within the CG group. The Systems Division specializes in electrical turnkey projects and has an impressive list of references covering over 50 countries, ranging from Australia to Zimbabwe.

AIS and GIS substations

The Systems Division is a specialist in turnkey substation projects up to 500 kV. These projects are carried out for large industrial customers as well as for electricity utilities.

Mobile substations and mobile (hybrid) transformers

Mobile substations are fully equipped electrical substations mounted on semi-trailers. Fast integration into the network and the ability to reuse them at other locations are the main advantages of these mobile units. In addition to that, the erection and commissioning time of the substation and the civil construction works are reduced to a minimum. That is because the mobile substation is completely pre-assembled and tested at the plant. Our scope ranges from mobile transformers to complete mobile substations with a maximum voltage rating of 220 kV and a maximum output of 80 MVA.

Compact substation designs

When space is at a premium, the Systems Division provides compact substation solutions such as modular substations. The concept developed by the Systems Division consists of three separate modules: high voltage equipment, power transformer and medium voltage equipment. Each module is mounted on skids. The modules are designed in such a way that transportation is easy and installation times short. They are pre-assembled at the Systems Division’s facilities. Before leaving the factory, the substation is exhaustively tested.

Systems Division

Page 2: AIS and GIS substations CG Power Systems Belgium NV · PDF fileCG Power Systems Belgium NV (formerly Pauwels Trafo Belgium NV) with manufacturing units in Belgium, Ireland, USA, Canada

CG Power Systems Belgium NV (formerly Pauwels Trafo Belgium NV) with manufacturing units in Belgium, Ireland, USA, Canada and Indonesia is a developer of innovative, high-quality, reliable products and turnkey solutions for a wide range of power applications.

Our Businesses

> Transformers > Switchgear> Systems> Automation> Services

Streamlined manufacturing with state-of-the-art machinery.

Every CG manufacturing plant is equipped with modern machinery for fast and efficient production. Besides, each plant continually seeks to achieve the optimum balance between economical designs and quality for which our brand stands. Every effort is made to ensure total quality control.

Sales and customer service

CG is a market-driven organization, set up to ensure the shortest possible lines of communication between customers and the group divisions. The CG Power Systems sales department is supported by a network of small, efficient sales offices and local, specialist representatives with expert knowledge of local conditions and customers’ requirements.

The CG strategy is based on creating solutions for its customers, combining state-of-the-art technology and manufacturing with international systems and after-sales services, making sure that project needs are met, anywhere in the world.

CG Power Systems Belgium NV

Distribution transformers

CG Power Systems offers a wide range of standard liquid-filled distribution transformers for the distribution of electricity to customers. The standard product range also includes SLIM® transformers that are smaller, lighter, capable of handling severe overloads and safer because of the application of Class K dielectric fluids. In addition, CG offers Bio-SLIM® transformers with a fully biodegradable transformer fluid, as a result of which it can be used in environmentally sensitive locations, such as offshore wind applications.

Special distribution transformers

In addition to the standard range, CG Power Systems manufactures special transformers for industrial applications. These non-standard types are the result of extensive product development based on constant monitoring and evaluation of changing customer requirements. In some cases, special customer requirements have led to the development of a new, customized product. Special distribution transformers have specific mechanical and/or electrical characteristics. Usually, these special transformer types are designed in such a way that they can be manufactured using standard production methods, requiring few modifications in the production process.

Power transformers

CG Power Systems has extensive expertise in the design and manufacturing of high voltage power transformers – top of the range for the transmission of electrical energy. Each power transformer is individually designed to be completely in accordance with the customer’s needs, meeting the most stringent requirement and applications. CG Power Systems provides its customers with efficient and innovative solutions, always anticipating their needs. CG Power Systems has established its reputation as a manufacturer of quality power transformers. The company takes pride in manufacturing products with a safe and reliable performance, providing excellent life-cycle value.

Transformers

CG Power Systems markets and supports a wide range of HV and EHV switchgear, up to 420 kV, to meet the requirements of electrical substations for the effective measurement, control and management of power in utility, industrial, urban and rural installations.

The product range includes:

> Three-phase enclosed GIS (Gas Insulated Switchgear) up to 145 kV

> Single-phase enclosed GIS from 170 kV to 300 kV > AIS (Air Insulated Switchgear) up to 420 kV

> Surge Arresters > Instrument Transformers > SF6 Gas Circuit Breakers > Disconnectors

All AIS switchgear is manufactured at the CG state-of-the-art manufacturing plants in India, and all GIS switchgear at the CG Electric Systems manufacturing plants in Hungary.

Switchgear