HALUL 65 M CONSTRUCTION VESSEL

Deck Machinery andConstruction Equipment

ALOKRAJ . V - NA07B004

High Pressure Water Jet Blasting Machine

One Electric driven water blasting machine 2 water jet guns, hoses 400 feet each as

minimum , a section of nozzle including the fan nozzles for cleaning the flat surface and multiple nozzles with reinforced hose for internal cleaning of pipe lines .

The discharge will include pressure monitoring indicators, relief valve, bye pass valve and rupture disc protection as minimum.

The high pressure water jetting will include dual flow splitter for 2 nos water guns to be operated at the same time.

High Pressure Water Jet Blasting Machine

Deck Power Supply. There should be two deck power supply

connections box on the working deck. Power Supply: 300 KW, 415 V, 50 Hz, 3 Phase

for each location.

Covered Fabrication Area. Approx 10M x 5 M preferably on Main deck. The fabrication area to have over head

movable lifting beam of approx 2 T SWL.

Racks. Two sets of Racks each to be provided for

storage of Scaffolding, Plates, Pipes. The Racks to be bolted on the Main Deck so

that these can be removed if required.

Breathing Air Compressor. One breathing air compressor to be provided

on board for charging the EEBD(Emergency Escape Breathing Device) and SCBA cylinders. (Self-contained breathing apparatus).

The compressor to have necessary filtration and to be certified for Breathing Air charging.

Air quality test certificate to be provided.

Breathing Air Compressor

Welding Rod Holding Oven. Temperature Range 3 to 300 deg

Celsius. Capacity 200 Kg.

Welding Rod Baking Oven. Temperature maximum 500 deg

Celsius Capacity 200 Kg

Atleast one of each are installed on the vessel

Work Dory.One work dory of below mentioned

specification to be placed on board Steel hull construction Minimum 8 meter length. The Boat to be equipped with

Proper stowage and certified lifting lugs/dedicated slings for launch / recovery by crane in to the boat cradle.

Splash proof, intrinsically safe VHF radio with extension speaker and microphone

Built in 200 Gallon fuel tank with drain cock

Demountable mast with navigational lights.

Wooden or rubber non slip flooring. Hull Anodes. All round rubber fendering and tubular

guard for the propellers. Complete safety items such as (Oars,

rowlocks, torch, flares, anchor and chain, medical kit and life vests.)

THANK YOU