of 6 /6
Alpha 355 S / Alpha 356 Multifunctional automatic crimping machines

Alpha 355S / Alpha 356 - unitek-elektrik.comunitek-elektrik.com/Images/Product/32/20160229125451916.pdf · THE WAY TO MAKE IT | FLEXIBLE With their open architecture, the Alpha 355S

  • Upload
    haanh

  • View
    224

  • Download
    0

Embed Size (px)

Citation preview

Alpha 355S / Alpha 356Multifunctional automatic crimping machines

THE WAY TO MAKE IT | FLEXIBLE

With their open architecture, the Alpha 355S and Alpha 356 have a wide vari-ety of applications. Besides Komax standard processing modules, many cus-tomer-specific modules can be easily integrated.

Alpha 355 SYou can mount up to five processing modules on the Alpha 355 S. In spite of its compactness, it offers excellent accessibility.

Alpha 356With its extra large mounting surface, the Alpha 356 has room for up to seven processing modules. This machine is ideal if you need increased flexibility or have complex processes.

Areas of applicationAlong with the most frequent standard processes of crimping and seal loading, you can obtain a large variety of processing modules such as: fluxing/tin-ning, twisting the ends of wires, fitting with insulating sleeves and crimping modules for ferrule crimping and MIL-crimping, ultrasonic or resistance welding modules. You can integrate customer-specific pro-cessing stations easily with the ultra-flexible TopWin software.

Alpha 356 With three crimping presses and two seal loading modules

User friendlyThe drive unit for the blade head is placed under-neath, giving the machine a neat and ergonomic layout. All processing stations have safety covers that open vertically for optimum access, and appli-cation-specific parts like applicators and contact rolls can be changed without tools. Controls are placed at decentralized positions, allowing the necessary machine functions to be triggered during setup. All setting and adjustment procedures can be cont-rolled from the TopWin graphical user interface in the operator’s choice of over 20 different languages.

Alpha 356 With crimping module and seal loading module

Maximum quality controlCrimp-height measurement and pull-out force mea-surement are integrated in the process sequence. Optional material-change detection and the optional barcode scanner help to prevent materials from getting mixed up. The processes are constantly checked against the specified values during produc-tion with functions that monitor crimp force, seals, splices, end of wire supply, and length. Any cables with processing defects are removed and an appro-priate number of cables are post-processed auto-matically to replace them.

Alpha 355 S Basic module 4m with quick-change system for tools

High productivityThe quick wire selector, quick tool-change system and other options ensure excellent productivity especially if there are frequent changeovers. With the reliable TopWin software you can record and edit jobs while the machine is running.

Conductor detector sensor ACDMiniaturization and new technologies are making the quality requirements on cable processing tougher all the time. To satisfy the current automobile crim-ping standard for solder-free electric connections, Komax has developed the fully automatic conductor detection (ACD). This product recognizes even the slightest contacts between blades and conductor strands in the course of production. ACD is based on a capacitive measuring principle and integrated in the blade holder. It uses the regular stripping blades. The work range covers the entire spectrum of cross sections, any conductor length and stripping with full strip or partial strip. There are setup parameters to set the limits of monitoring desired. Defective con-ductor ends are removed fully automatically during production.

ACD Conductor detector sensor

Choice of standard configurations

Alpha 355 S Alpha 356

Your benefit• Highly flexible with up to five or seven processing stations• Integration of standard and customer-specific processes possible• Conductor detector sensor for highest quality in cutting• Integrated quality measurements• Create the next job while the machine is running• Can be integrated in a network with WPCS interface

Stat. 5 (47°)

mci 712

mci 722

AEH-G

CM03

Stat. 3 (21°)

Double gripper module

Stat. 4 (35°)

mci 765 C

mci 792

Stat. 2 (47°)

mci 712

mci 722

AEH-G

CM03

Stat. 1 (22°)

mci 765 C

mci 792

Stat. 3 (78°)

mci 712

mci 722

AEH-G

CM03

ioc 785

Stat. 7 (51°/60°)

mci 712

mci 722

AEH-G

CM03

Stat. 8 (77°)

mci 712

mci 722

AEH-G

CM03

Stat. 4 (110°)

mci 712

mci 722

AEH-G

CM03

Stat. 5 (21°)

Double grippermodule

Stat. 2 (44°)

mci 712

mci 722

AEH-G

CM03

Stat. 1 (22°)

mci 765 C

mci 792

Stat. 6 (35°)

mci 765 C

mci 792

ioc 785

Strip Quality Check SQCThe stripping quality check (SQC) entails visually monitoring the stripping quality during the swivel mo-vement. It measures the stripping length and checks the wire for projecting or splayed wires. The use of the SQC instead of the CPS option („cut pulled strands“) boosts the output by an average up to 10 percent. The actual figure depends on conductor length and quality.Defective products are automati-cally removed.

Alpha 356

Alpha 355 S

Alpha 355 S

Alpha 356

Alpha 356

Application sample Alpha 355S/356

Flat cable / Notching

Inner conductor processing

Double sheath / Coaxial

and triaxial cables

Ferrule crimping

MIL-Crimping

Wire end solidifying /

Splicing / Welding

Hot stamp marking

Ink-Jet marking

Cutting

Half strip

Full strip

Intermediate strip /

Intermediate slitting

Twisting / Tinning

Crimping

Seal insertion

Split cycle

for closed barrel

Double crimping

Sleeve insertion

Options and Accessories

Feeding systems Komax 106 | ads 117 | ads 119

Marking systems Komax 26 hot stamp marking | Komax Inkjet marking system IMS | Laser marking on request

Wire infeed Belt drive

Processing modules Crimping module mci 712 | Crimping module mci 722 (with programmed crimp heights) | Seal loading module mci 765 C (with seal position monitoring SPM) | Twisting module mci 782 | Tinning module ioc 785 | Sleeve module mci 792 | Double gripper module | Wire end ferrule module AEH | MIL-crimping module | Welding module | Ultrasonic compaction

Quality control Integrated crimp height measurement | Integrated pull-off force measurement | Conductor detector sensor ACD | Strip quality check SQC | Crimp force analyzer CFA/CFA+ | Material change detection | Material verification | Wire length correction | Splice check | Spark tester | Seal position monitoring SPM/SPA | Terminal end detection

Deposit systems Basic module 2m (78.7in.) or 4m (157.5in.) | Extension module 2m (78.7in.) or 4m (157.5in.) | Deposit gripper

Accessories Tool changer (355S) | Automatic guide tube changer (355S) | Barcodescanner

Software Networking WPCS | Data conversion TopConvert | Production control center KomaxCAO

0

1000

2000

3000

4000

5000

0 500 1000 1500 2000 2500 3000 3500 40000

1000

2000

3000

4000

5000

0 1000 2000 3000 4000 5000 6000 7000 8000

THE WAY TO MAKE IT

CC

. Alp

ha 3

55 S

& 3

56

0320

020

Vers

io n

3

Sub

ject

to c

hang

e /g

u

Mad

e in

Sw

itzer

land

Technical data

Length range 60mm–65000mm (2.36in.–213ft.)Optionally 30–60mm (1.18in.–2.36in.)

Length accuracy Repeat accuracy: ±(0.2% +1.0mm (0.04in.))

Stripping lengths 0.1mm–35mm (0.004in.–1.38in.)

Stripping lengths with partial strip

47mm (1.85in.) on side 1 | 35mm (1.35in.) on side 2Optionally up to 80mm (3.15in.)

Wire cross-sections* 0.22 mm2–6mm2 (AWG24–AWG10) Optionally 0.13mm2 (AWG26)

Wire infeed speed max. 12m/s (39ft/s)

Noise level <80dB (no crimping module)

Electrical connection 3×208–480V / 50–60Hz 5kVA

Pneumatic system 5–8bar (73–116psi) | 9m3/h (318ft3/h)

Weight incl. crimp and seal modules

Alpha 355 S: ca. 1300kg (2866lb.)Alpha 356: ca. 1400kg (3090lb.)

* Extremely hard and tough wires may not be able to be processed even if they are within the above cross section range. If you are in doubt about your wires, we are happy to process samples of them.

4125mm (162.4in.) 4125mm (162.4in.)

1485

mm

(58.

5in

.)Machine layout Alpha 355S

More information about

our products:

www.komaxwire.com

Komax Wire is a division

of Komax Holding AG,

Switzerland.

Conductor FLRY 0.50mm2 (AWG20)

Pneumatic pressure 6bar (87psi)Speed 12m/s (39ft/s)Acceleration 60m/s2 (197ft/s2)Crimping module mci 722Seal loading module mci 765 CQuality monitoring active

Reference values for piece output of Alpha 355SPieces/h

Wire length [mm]

Heigth with cover closed: 2000mm (78.7in.)Heigth with cover open: 2900mm (114.2in.)

1964

mm

(77.

3in

.)

Heigth with cover closed: 2000mm (78.7in.)Heigth with cover open: 2900mm (114.2in.)

Machine layout Alpha 356

Reference values for piece output of Alpha 356Pieces/h

Wire length [mm]

Conductor FLRY 0.75mm2 (AWG19)

Pneumatic pressure 6bar (87psi)Speed 10m/s (33ft/s)Acceleration 50m/s2 (164ft/s2)Crimping module mci 722Seal loading module mci 765 CQuality monitoring active