BUILT BETTER THAH IT HAS TO BE"

Owner's ManualCovering models AKT3020, AKT3630, AKT3040 and AKT3650

Electric SmoothtopCooktopKeep instructions for future reference.Be sure manual stays with cooktop.

ContentsImportant Safety Information ............. 3Utensil Recommendations ................ 5Cooking on the Smoothtop ................ 6Care and Cleaning ............................ 8Troubleshooting ................................. 9Amana Warranty ............................. 12

Part No.81 ! 1P469-60

Thank you for buying an Amana Cooktop!

Please take the time to complete the registration card and return promptly.If registration card is missing, call Amana Consumer Affairs Department.When contacting Amana, provide product information from serial plate. Theserial plate is located on the underside of the unit.

Model NumberManufacturing (P) NumberSerial Number (S/N)Purchase DateDealer NameDealer AddressDealer Phone

Keep this manual and your sales receipt together in a safe place forfuture reference or if warranty service is required.

For answers to questions or to locate an authorized servicer, call1-800-688-9900 USA or 1-800-688-2002 Canada. Warrantyservice must be performed by an authorized servicer.Amana Appliances also recommends contacting an authorizedservicer if service is required after warranty expires.

Asure TM Extended

Service PlanAmana Appliances oilers long-terlnservice protection for this new cooktop.Asure TM Extended Service Plan,covering functional parts, labor, andtravel chaNes, is specially designed tosupplement a strong warranty.Call 1-800-528-2682 t\_r information.

Parts and AccessoriesPurchase replacement parts andadditional accessories by phone.To order accessories for your Amanaproduct, call1-800-688-9900 USA or1-800-688-2002 Canada

Save Time and MoneyIf something seems unusual, pleasecheck "Troubleshooting" section,which is designed to help you solveproblems before calling service. If youhave a question, call 1-800-688-9900 USAor 1-800-688-9900 Canada or write us at:

Consumer Affairs DepartmentAmana Appliances2800 - 220th TrailAmana, Iowa 52204

Remember to include model numberof your appliance and your phonenumbel:

What You Need to Knowabout Safety InstructionsWarning and Important SafetyInstructions appearing in this manualare not meant to cover all possibleconditions and situations that mayoccur. Co1111ylonsense, caution, and caremust be exercised when installing,maintaining, or operating cooktop.

Always contact your dealer, distributor,service agent, or manufacturer aboutproblems or conditions you do notunderstand.

Recognize Safety Symbols, Words, LabelsDANGER

DANGER--Immediate hazards which WILL result in severe personalinjury or death.

WARNINGWARNING--Hazards or unsafe practices which COULD result in severe

personal injury or death.

CAUTIONCAUTION--Hazards or unsafe practices which COULD result in minor

personal injury or product or property damage.

IMPORTANT SAFETY INFORMATION

CAUTIONDO NOT TOUCH SURFACE UNITS OR AREAS NEAR UNITS--Surfaceunits may be hot though they are dark in color. Areas near surface unitsmay become hot enough to cause burns. During and after use, do nottouch, or let clothing touch or other flammable materials contact surfaceunits or areas near surface units until they have had enough time to cool.These areas include the cooktop and backguard.

CAUTIONDuring and after use, do not touch, or let clothing or other flammablematerials touch heating elements or interior surfaces of cooktop until theyhave had enough time to cool.

[ WARNING ]To avoid personal injury, do notsit, stand or lean on cooktop.

[ WARNING ]To avoid risk of electrical shock,personal injury, or death, makesure your cooktop has beenproperly grounded and alwaysdisconnect it from main powersupply before servicing.

Precautions Do not cook food directly on cooktop surface,

always use cookware. Do not mix household cleaning products. Chemical mixtures may interact

with objectionable or even hazardous results. Do not put plastic items on warm cooking areas. They may melt and stick. Do not slide rough metal objects across cooktop surface. Scratching or

metal marking can result. Do not leave fat heating unless you remain nearby. Fat can ignite if

overheated by spilling onto hot surfaces. Do not allow pots to boil dry as this can cause damage to cooking surface

and pan. Do not use cooktop surface as a cutting board. Do not use cooktop for storage or as a display counter.

In Case ofFireFires can occur as aresult of over cooking orexcessive grease.

Though a fire is unlikely, if oneoccurs, proceed as follows:

Surface Element Fire1. Smother the fire with a

nonflammable lid or bakingsoda, or use a Class ABC or BCextinguisher. Not water. Not salt.Not flour.

2. As soon as it is safe to do so,turn the surface controls to OFF.Turn off power at main circuitbreaker or fuse box.

SAVE THESE INSTRUCTIONS

IMPORTANT SAFETY INFORMATION (cont'd)

ALL APPLIANCES1. Proper Installation--Be

sure your appliance is

Utensil Recommendations

What Should I Consider in Cookware?

SELECT AVOI D

Cookware with rounded or warpedFlat bottomed cookware. bottoms.

Pans with aluminum disk Glass, glass-ceramic, enamelbottoms, porcelain or cast iron cookware,

canners or pressure cookers.

Heavy gauge metal cookware. Light gauge metal cookware.

Handles that are secure, that are Cookware with loose or brokennot heavy enough to tilt pan. handles.

Cookware that is smaller than orProper pan size. greater than heating element size

by 1 inch.

Flat bottomed wok. Wok with a ringstand on bottom.

Flat Pan TestFor best cooking results, use a panwith a flat bottom. To determine ifpan has a flat bottom.1. Rotate a ruler along bottom of

pan. If pan is not flat, gapsbetween bottom of pan andedge of ruler can be seen.

2. A small groove or mark on apan does not affect cookingtimes. However, if a pan has agap, formed rings, or an unevenbottom, it does not cookefficiently and in some casesmay not boil liquid.

More allan1 inch overhang

Conect size

COOKWAREMATERIAL USES

Aluminum

Stainless Steel

Copper Clad /Tin Lined

Heats and cools quickly. Use for frying, braising,and roasting.Heats and cools at moderate rate. Use for soups,sauces, vegetables, general cooking.Heats and cools quickly. Use for gourmet cooking,wine sauces, egg dishes.

Can I can?

Canning is not recommended with aWof the Amana smoothtop ranges orcooktops due to the intense heat andlarge cookware required to can.

The heat generated by the canningcook_x_e overheats both the elements andthe slnoothtop of the cooktop. This maycause the slnoothtop to crack, cause thilureof the heating elements, midmay causeoverheating of the surrounding walls.

Damage incurred by canning, orattempting to can, using the smoothtopcooktop is not covered under warranty.

Cooking on the Smoothtop

If These Featuresare Different from

_ YoursThese examples are intended

to show the variety of features that areavailable in the product line. If yourcooktop does not have all the optionsthat are shmxm, it is not a mistake. Theinformation provided applies to severalof the models in the product line.

Cooking Safely withSurface Elements

WARNINGTo avoid risk of serious personalinjury, property damage, or fire,do not leave surface elementsunattended while in operation.Grease and spillovers can ignitecausing a fire.

WARNINGTo avoid risk of electrical shockor serious personal injury, never cook on a broken

smoothtop cooking surface.Spillovers can penetrate brokensurface and cause electricshock.

never clean broken cooktop.Cleaners can penetrate brokensurface and cause electricshock.

If smoothtop cooking surfacebreaks, discontinue use andcontact an authorized servicerimmediately.

WARNINGTo avoid serious personal injury,do not use a damp or wet clothto clean up spills on a hot orwarm cooktop. Moist or dampcloths on hot surfaces mayresult in burns from steam.

Setting SurfaceElement ControlsPush and turn the surface element control knobs ineither direction to turn on the surface elements. Theouter edge of your pan should always cover theelement graphic, with a maximum overhang of1 inch. Surface elements are located under theceramic cooking surface and radiate heat throughthe cooktop. The controls have infinite settingsbetween LO and HI for fine temperature control.

1. Push in and turn surface element control to desired setting. You will see the element turn on and off while you are cooking.

This is the element cycling to maintain proper temperature.2. When finished cooking, turn control to OFF position.

Dual Surface ElementsDual surface elements have an inner and outerelement that can be set according to the pan size.The outer edge of your pan should always coverthe element graphic, with a maximum overhang of1 inch. To use inner and outer elementsimultaneously, push and turn knob to double linedside of knob and desired heat setting. To use innerelement only, push and turn knob to single line side of knob and desired heatsetting. When finished, turn control to OFF position.

SURFACE ELEMENTCONTROLSETTINGS

LO

MED

HI

WHEN TO USE SETTING

Use to prepare food at less than boilingtemperatures or to simmer.Use to maintain boiling of larger amounts of food,low temperature frying.Use to bring food to boiling temperatures. Whenfood is boiling temperature setting should bereduced to LO through MED.

Indicator LightsSurface elements are indicated by an indicator light that glows when the element isturned on. The location and number of indicator lights vary with each model. Aftera surface control is turned off\ the surface indicator light will continue to glow untilsur*:ace temperature has cooled to approximately 145F. The length of time the lightremains on will vary. If there is more than one surface element light, do not expectthe lights to shut off"at the same time.

After you cook......remember to establish a cleaning routine for your smoothtop. Cooktops can besensitive to certain cooking spillovers. Unlike conventional cooktops, smoothtopsshould not be cleaned with a wet dishcloth when wiping down other counters. Dailycare is quick, easy and can prevent damage. To purchase Alnana recommendedcleaning products, contact our Consumer Affairs departmentat (800) 843-0304.

6

Cooking on the Smoothtop (cont'd)

Using the Warming ZoneSome cooktops are equipped with a convenient warming zone. The warmingzone is designed to keep hot foods hot until serving time. When cookingsuch foods as pancakes, fried chicken, or even stir-fry the warming zone cankeep cooked foods hot as other portions are cooked.

All food placed on the warming zone should be covered with aluminum foil ora lid to maintain quality. For best results, when warming pastries or breads,cover should have a vent to allow moisture to escape. Do not use plasticwrap or plastic lids to cover food. The plastic could melt onto the surface andbe very difficult to clean.

Cookware should be restricted to utensils designed for use with a smoothtopcooktop. Cookware used on the warming zone should also not exceed thepattern of the element by more than one inch or be taller than six inches.

1. Push in and turn surface element control to desired setting. Warmingzone element approximate temperatures are: 145F on LO setting 175F on MED-LO setting 205F on MED setting 250F on MED-HI setting 325F on HI setting

2. When finished with warming zone, turn control to OFF position.

Temperature SelectionTo decrease the likelihood of food borne illness, hot foods should be kept at aminimum of 140R Use a meat thermometer to verify foods kept on thewarming zone are at this temperature. Use the chart below to approximatewhat heat setting to begin using for a particular food. Adjust as necessarydepending on the maintained temperature of the food.

Warming Zone Recommended SettingsApproximate

Temperature FFood Item Heat Setting (Element)Breads/Pastries

Casseroles

Dinner Plates with Food

Eggs

Mashed Potatoes

Hamburger Casserole

Gravies

Meats

Sauces

Cream based soups

Stews

Vegetables

Fried Foods

Hot Beverages

Soups

LO 145

LO 145

LO 145

LO 145

LO 145

MED-LO 175

MED 205

MED 205

MED 205

MED 205

MED 205

HI 325

HI 325

HI 325

HI 325

CAUTIONAlways use potholders or ovenmitts when removing food fromthe warming zone as cookwareand plates will be hot.

Warming Zone UtensilRecommendationsBecause the warming zone is a part ofthe smoothtop cooktop, it isrecommended only to use utensilsdesigned specifically fbr use on thesmoothtop (see Cookware Suggestionssection). Using cookware not designedfbr use with a smoothtop may result inpoor cooking performance, damage tothe smoothtop, or damage to thecookware. Cookware should not bewider than 8 inches around or tallerthan 6 inches in height.

Indicator LightThe wanning zone has its own indicatorlight. It turns on when the control is set.The indicator light will remain on afterthe knob is turned to an offposition ifthe surface is still warln (approximately145 F). When the glass of the cooktophas cooled down sui_ciently, theindicator light will then shut off.

Care and Cleaning

Cleaning the Cooktop

SUGGESTEDCLEANING MATERIALSPART GENERAL DIRECTIONS AND RECOMMENDATIONS

Pull off knobs. Wash gently but do not soak. Dry and return controls to cooktop,Control knobs Mild soap and water making sure to match flat area on the knob to the flat area on shaft. Do not place

in dishwasher.

Clean cooktop trim with damp cloth and soapy water. If necessary, clean withCooktop trim Soap and water nonabrasive cleaners or pads. Dry thoroughly when finished to avoid rusting. Do

not use harsh powders, oven cleaners, scouring pads, or steel wool.

Smoothtop Smoothtop cleaner conditioner Follow cleaning directions on package and below.

Caring for the SmoothtopFor routine cleaning, allow top to cool before cleansing. Wash surface with a dampened cloth and smoothtop cleanerconditioner. Use another clean damp paper towel to wipe off the cleaner. Use a dry paper towel, buff the smoothtopto make sure all the cleaner conditioner is removed. The smoothtop cleaner conditioner provides a thin layer ofprotective polish that helps prevent scratching. Do not use a harsh cleanser or steel wool pad. For specific problems,see below.

PROBLEM CAUSE REMOVAL

Brown streaks and Cleaning with sponge or cloth containing soiled Normal cleansing (provided above).specks detergent water.

Clean area with smoothtop cleaner conditioner withclean damp paper towel, nonabrasive nylon pad, or

Blackened, burnt on Spatters or spillovers on a hot cooking area or scouring brush.spots accidental melting of plastic like a bread bag. If spot is not removed, on cool cooktop carefully scrape

area with a safety scraper held at a 30-degree angle.

Fine brown gray lines, Course particles, like salt, become embedded infine scratches or top if trapped under pan. Using abrasive Fine scratches are not removable but can be minimizedabrasions cleaning materials. Scratches from rough by daily use of smoothtop cleaner conditioner.

ceramic, glass, or ceramic coated cookware.

Using too much smoothtop cleaner conditioner Follow label instructions carefully. See RoutineSmearing or streaking or using a soiled dish cloth. Cleaning, above.

Metal or silver/gray Remove marks before top is used again. If marks aremarks, may appear to not removed by normal cleaning, use a safety scraper atbe in or under Sliding or scraping metal utensils across top. a 30 angle and cooktop cleaner conditioner to carefullysmoothop scrape off the mark.

Turn control to LOW setting long enough to softenspilled material. Wipe up excess spill with dry cloth.

Pitting or flaking Boilovers of sugar syrup on a hot smoothtop can Allow top to cool and carefully scrape area with a safetycause pitting if not removed immediately, scraper held at a 30-degree angle. Follow with routine

cleaning.

Hard water spots

Condensation from cooking can cause mineralsfound in water and acids in food to drip ontosmoothtop and cause gray deposits. Spots areoften so thin they appear to be in or undersmoothtop.

Mix smoothtop cleaner conditioner with water and applythick paste to stained area. Scrub vigorously. If stain isnot removed, reapply cleaner and repeat processORmake sure the surface is cool and put a small amount ofwhite vinegar on the spot and let it sit a few minutes.Use a nonabrasive nylon pad and gently rub the spot.Wipe off any excess with a damp paper towel, then dry.

Troubleshooting

You may save time and money by checking items below before calling for service. List includes common concernsthat are not the result of defective workmanship or materials. If your question is not explained below, call1-800-688-9900 USA or 1-800-688-2002 Canada.

Topic

OPERATION

Appliance not working

Possible Cause

Power outage

Solution

Make sure appliance has power.Verify that circuit breaker is not tripped.Replace fuse but do not change fuse capacity.

.o,s Frequent cycling off and on of surfaceunits

Cracking or popping sound

Normal

Normal

Smoothtop burners cycle on and off to maintain properheating temperature.

Wet cooking utensils or possible spillage.

APPEARANCE

Scratches

Discoloration

Gritty dirt or rough surfaceon cooking utensils

Shiny scratches

Dirt

Water spots/marks

Use recommended smoothtop cleaner conditioner.

May be a metal mark. Make sure surface is cool. Usesafety scraper to carefully scrape off the mark. Applysmoothtop cleaner conditioner and gently rub withnonabrasive nylon pad.

Use recommended smoothtop cleaner conditioner toremove dirt from smoothtop.

Make sure surface is cool. Put a small amount of whitevinegar on the spot and let sit for a few minutes. Rub withnonabrasive nylon pad. Wipe off any excess with damppaper towel.

Hot sugar or plastic melted to surface Spills Allow cooktop to warm slightly. Using a safety scraper,gently remove soil. Follow with routine cleaning.

Use recommended cleaner conditioner to remove buildPattern fading/wearing off Dirt/film buildup up and dirt from smoothtop.

10

11

Amana Warranty

CUSTOMER'SSOLEAND EXCLUSIVEREMEDYUNDERTHIS LIMITEDWARRANTYSHALLBE PRODUCTREPAIRAS PROVIDEDHEREIN. IMPLIEDWARRANTIES,INCLUDINGWARRANTIESOF MERCHANTABILITYORFITNESSFORA PARTICULARPURPOSE,ARELIMITEDTO ONE YEAROR THESHORTESTPERIODALLOWEDBY LAW. MAYTAGCORPORATIONSHALLNOTBE LIABLEFORINCIDENTALOR CONSEQUENTIALDAMAGES. SOMESTATESANDPROVINCESDO NOTALLOWTHEEXCLUSIONORLIMITATIONOF INCIDENTALORCONSEQUENTIALDAMAGES,ORLIMITATIONSON THEDURATIONOF IMPLIEDWARRANTIESOF MERCHANTABILITYORFITNESS,SOTHESEEXCLUSIONSORLIMITATIONSMAY NOTAPPLYTO YOU. THISWARRANTYGIVESYOU SPECIFICLEGALRIGHTSANDYOU MAYALSOHAVEOTHERRIGHTS,WHICHVARY STATETO STATEORPROVINCETO PROVINCE.

What is NotCoveredBy TheseWarranties1. Conditionsanddamagesresultingfromany of the following:

a. Improperinstallation,delivery,or maintenance.b. Any repair,modification,alteration,or adjustmentnot authorizedby the

manufactureror an authorizedservicer.c. Misuse,abuse,accidents,or unreasonableuse,or acts of God.d. Incorrectelectriccurrent,voltage,electricaland/or gas supply.e. Impropersettingof anycontrol.

2 Warrantiesarevoid if the originalserialnumbershavebeenremoved,altered,or cannotbe readilydetermined.

3. Lightbulbs,water filtersand air filters.

4. Productspurchasedfor commercialor industrialuse.5. The costof serviceor servicecall to:

a. Correctinstallationerrors.For productsrequiringventilation,rigidmetalductingmustbe used.

b. Instructthe user onthe properuse of the product.c. Transportthe applianceto andfrom the servicer.

6. Anyfood lossdueto refrigeratoror freezerproductfailures.

7. Expensesfor travelandtransportationfor productservicein remotelocations.

8. Outsideof the UnitedStatesandCanadathiswarrantydoes not apply. Contactyourdealerto determineif anotherwarrantyapplies.

9. Consequentialor incidentaldamagessustainedby any personas a resultof any breachof thesewarranties.Somestatesdo not allowthe exclusionor limitationof consequentialor incidentaldamages,so the aboveexclusionmaynot apply.

If You Need ServiceFirstsee the Troubleshootingsectionin your UseandCare Guideorcall the dealerfromwhomyour appliancewaspurchasedorcall MaytagServices,LLC,CustomerAssistanceat1-800-688-9900USAand 1-800-688-2002Canadato locatean authorizedservicer.

, Besureto retain proofof purchaseto verifywarrantystatus. Referto WARRANTYforfurther informationonowner's responsibilitiesfor warrantyservice.

, If the dealeror servicecompanycannotresolvethe problem,write to MaytagServices,LLC,Attn: CAIRCenter,P.O.Box 2370,Cleveland,TN 37320-2370,or call 1-800-688-9900 USAand 1-800-688-2002Canada.U.S.customersusingTTYfor deaf,hearingimpairedor speechimpaired,call 1-800-888-2080.

, User'sguides,servicemanualsandparts informationare availablefrom MaytagServices,LLC,CustomerAssistance.

Notes: Whenwritingorcalling abouta serviceproblem,pleaseinclude:

a. Yourname,addressandtelephonenumber;b. Modelnumberandserial number;c. Nameand addressof your dealerorservicer;d. A cleardescriptionof the problemyou are having;e. Proofof purchase(salesreceipt).

Form No A/O1/06 Part No 8113P469-60 _)2006 Maytag Appliances Sales Co Litho USA.