(AN OVERVIEW IS NOT COMPLETED AND NOT …Branko Katalinic Curriculum Vitae Page 1 Head Professor Dr h.c.multi.Prof.h.c.Dr sc. Branko Katalinić President of DAAAM International Vienna

Branko Katalinic Curriculum Vitae Page 1

Head Professor Dr h.c.multi.Prof.h.c.Dr sc.

Branko Katalinić President of DAAAM International Vienna

President of Central European Branch - IAE TU Wien, IFT/IMS, Karlsplatz 13/311

A-1040 Vienna, Austria, EU Office: +43-1-58801-31121 Cell: +436645164606

URL: http://www.daaam.info [email protected] [email protected]

Professor at the University of Zadar, Zadar, Croatia Executive Adviser and Project Director, Company Festo

Vienna 2017-02-01

CURRICULUM VITAE

(AN OVERVIEW, IS NOT COMPLETED AND NOT UPDATED)

Birthplace: Starigrad-Paklenica, Zadar, Croatia

Date of birth: October 12, 1952

Citizenships: Honour Austrian Citizenship given for the extraordinary Results in Science and State

Interests of Republic of Austria (§ 10 Abs. 4 StbG) and Croatian

Education & Academic Background

1971-1976 (Dipl.-Ing.) Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb,

Zagreb, Croatia

1976-1969 (Mag. sci. technicae), Postgraduate studies at Faculty of Mechanical Engineering and Naval

Architecture, University of Zagreb, Zagreb, Croatia,

1980-1981 Specialization in Industrial Robotics, The Royal Institute of Technology, (prof. G. Sohlenius),

Stockholm, Sweden

1979-1983 (Dr. technicae) Doctor studies at Faculty of Mechanical Engineering and Naval Architecture,

University of Zagreb, Croatia,

1991 Venia docendi - Habilitation, Vienna University of Technology, Vienna, Austria,

("Universitäsdozent" / Associated Professor)

Languages Croatian, German, English, Russian

Special Fields of Knowledge:

Manufacturing, Flexible Automation, Robotics, Intelligent Manufacturing Systems, Self organising

Production Systems, Mechatronics, International Scientific and Academic Collaboration

Institute for Production Engineering and Laser

Technology / Intelligent Manufacturing Systems

http://www.daaam.info/

mailto:[email protected]




Present Research Interests:

Intelligent manufacturing systems / Self organising production systems / Robotics / Mechatronics /

Megatrends in Science and Technology / International scientific and academic cooperation /

Scientific Publishing

Professional Experience: Academic / Industry

2009-present Full Professor (Ordinarius) at University of Zadar (Universitas Studiorum Jadertina), Zadar,

Croatia

2008 -present Visiting Professor at University of Novi Sad, Serbia

2007-present Executive adviser and Project director for the cooperation with universities and academies

of sciences - Festo concern

1997-present Full Professor at University of Rijeka, Rijeka, Croatia

1996-2009 Full Professor at J.J. Strossmayer University of Osijek, Osijek, Croatia

1996-present First Adjunct Full Professor at University of Zagreb, Zagreb, Croatia

1995-present Visiting professor at Faculty of Economics, MBA international postgraduate studies,

University of Maribor, Maribor, Slovenia

1995 Visiting professor at Faculty of Mechanical Engineering, University of Maribor, Maribor,

Slovenia

1994-present Professor at the Vienna University of Technology, Vienna, Austria

1993-1996 Visiting professor at Faculty of Mechanical Engineering, Slavonski Brod, Croatia

1994-present Visiting professor at Slovak Technical University Bratislava, MTF Trnava, Trnava, Slovakia

1994-1997 Visiting professor at Faculty of Technical Science University of Rijeka, Rijeka, Croatia

1994 -present Founder and Chairman of "Intelligent Manufacturing System" Section at Department of

Production Engineering, Vienna University of Technology

1993-1996 Visiting professor - Euro Laser Academy, Europewide Postgraduate Studies (Aachen,

Cambridge, Oxford, Liverpool, Vienna)

1992 Visiting professor at Asian Institute of Technology, Bangkok, Thailand (Robotics / FMS)

Founding of Production Engineering Studies.

1991 University Assistant ("Universitätsassistent") at Department for Production Engineering,

Vienna University of Technology,

1991 Habilitation (venia docendi) at Vienna University of Technology (Robotics / CIM)

1986 University lecturer at Vienna University of Technology, (Course - "Robots: Design,

Calculation and Simulation")

1985-1991 Senior Researcher, Vienna University of Technology, Department of Production

Engineering, Vienna, Austria

1984-1985 Design of Flexible Transport Systems - Philips Video Plant - Vienna, Vienna

1981-1984 Scientific Assistant, Faculty of Mechanical Engineering and Naval Architecture, University of

Zagreb, Zagreb, Croatia

1980-1981 Specialization in Industrial Robotics, The Royal Institute of Technology, (prof. G. Sohlenius),

Stockholm, Sweden

1977-1980 University Assistant, Faculty of Mechanical Engineering and Naval Architecture, University

of Zagreb, Croatia

1976-1977 Power Plant Construction (Kosovo, Serbia and Negotino Macedonia), Monting Zagreb, Chief

Engineer


Honours, Prizes, and Awards

1. "University Award for Excellent Students", University of Zagreb, May 2, 1974, Zagreb, Croatia

2. "Great Medal of the Faculty of Mechanical Engineering and Naval Architecture, University of

Zagreb", University of Zagreb, February 10, 1976, Zagreb, Croatia

3. "Certificate of Appreciation, Power Plant Negotino", May 1978, Skopje, Macedonia

4. "Certificate of Appreciation, University of Maribor" for excellence in international scientific

collaboration in frame of DAAAM (Donau Adria Assoziation für Automation und Metrologie), as

founder and president of DAAAM International, University of Maribor, November 27, 1994,

Maribor, Slovenia

5. "500 Years Medal of Parliament of Republic Poland 1492-1992 (Senat Rzeczypospolitej Polskiej)" for

the excellence in research and international scientific cooperation on benefit of Republic of Poland,

November 28, 1995, Cracow, Poland

6. "Medal of Technical University of Kielce, (Politechnika Swietokrzyska Kielce)" In order to mark 30th

Anniversary of University, for excellence in science and international scientific cooperation, Kielce,

November 25, 1995, Kielce, Poland

7. "Honorary Badge of the Cracow University of Technology", Cracow University of Technology,

Cracow, Poland, October 3, 1996

8. DAAAM International Gold Medal, 1996

9. Medal and Certificate of University of Zagreb, University of Zagreb, Zagreb, Croatia, 3. November

1997

10. Gold Medal of Croatian Maintenance Society, Euromaintenance 98, Dubrovnik, Croatia, October 7,

1998

11. Award of University of Split – Faculty of Economics, University of Split, Split, Croatia, December 23,

1998

12. Diploma di Honore, Technical University of Cluj-Napoca University of Cluj-Napoca, Romania, 22.

October 1998.

13. 80th Anniversary Award of Faculty of Mechanical Engineering and Naval Architecture, University of

Zagreb, Zagreb, Croatia 12. November 1999

14. DAAAM Interenational Jubilee Gold Medal, 2009

15. Acknowledgement of Faculty of Mechanical Engineering, University of Mostar, 40 Anniversary of

Faculty of Mechanical Engineering, University of Mostar, Mostar, Bosnia and Herzegovina, 25th

February 2000

16. Gold Plaque of the University of Maribor, University of Maribor, Maribor, 11. October 2001

17. Medal of Material and Technology Faculty - Trnava, Slovak Technical University Bratislava, 2001-

05-17

18. Acknowledgement of Faculty of Mechanical Engineering, University of Mostar, 50 Anniversary of

Faculty of Mechanical Engineering, University of Mostar, Mostar, Bosnia and Herzegovina, 5th

December 2009

19. Gold Plaque of the University of Novi Sad - Faculty of Technical Sciences - 50th Anniversary, 10th

October 2010

20. MIA – IAE Gold medal, 12th October 2012, Stuttgart, Germany

21. „Branko Katalinic Leadership Medal“, 25th October 2012, Zadar, Croatia

22. „Coat of Arms – Commune Starigrad-Paklenica“, Croatia, 13th August 2013

23. DAAAM International Network Honor Medal, 2014


Doctor Honoris Causa

1. Doctor honoris causa (Dr.h.c.), Technical University of Kosice, Kosice, Slovakia, September 24, 1997

2. Doctor honoris causa (Dr.h.c.), “Stankin” Moscow Technical State University, Moscow, Russia, April

1998

3. Doctor honoris causa (Dr.h.c.), Tallinn Technical University, Tallinn, Estonia, September 2002

4. Doctor honoris causa (Dr.h.c.), University of Mostar, Mostar, Bosnia and Herzegovina, 15th

December 2003

5. Doctor honoris causa (Dr.h.c.), University of Novi Sad, Novi Sad, Serbia, 30th June 2009 6. Doctor honoris caus (Dr.h.c), Baltic State Technical University, Sankt Petersburg, Russia, 17th

November 2016

Professor Honoris Causa

1. Professor honoris causa (Prof.h.c.), Far East National Technical University, Vladivostok, Russia, June

11th 2010

2. Professor honoris causa (Prof.h.c.), Omsk State Transport University, Omsk, Russia, February 26th

2016

University Network of DAAAM International

1. Initiator and founder of University Network of DAAAM International Vienna, University Network

was founded on 23rd November 1997, International Centre of Croatian Universities, (University of

Zagreb), Dubrovnik, Croatia

2. DAAAM International Network for Advanced Technology. Initiator and founder of DAAAM

International Network for Advanced Technologies, DAAAM International Network for Advanced

Technologies was founded on 25th November 2002, Austrian Society of Engineers and Architects,

Vienna, Austria

3. Danube Rectors´ Conference. Member of Permanent Committee of Danube Rectors´ Conference,

since 1996. Initiator, founder and chairman of Scientific Committee for Technical Studies of Danube

Rectors´ Conference, Founded at Danube Rectors´ Conference, University of Leoben, Leoben,

September 24, 1996, Austria

4. Initiator and founder of Synergy University Network, February 24th 2008 (Members: MEI Moscow,

BGTU Sankt Petersburg, OmskSTU Omsk, SevNTU Sevastopol, KarSTU Karganda, University Novi

Sad, Vienna University of Applied Sciences Vienna, and concern Festo)

5. Initiator and founder of DAAAM International Network for Doctoral Studies. 22 Institutions agreed

to found permanent International Network for Support of Doctoral Students under the name

„DAAAM International Doctoral School" more at www.daaam.info Founding Charter was signed on

26th October 2012.

Visiting Researcher / Faculty:

Asian Institute of Technology, Bangkok, Thailand / Cracow University of Technology, Cracow, Poland

/ Iowa State University, Faculty of Mechanical Engineering, USA / J.J. Strossmayer University

of Osijek, Osijek, Croatia / Johannes Kepler University, Linz, Austria / Kobe University, Faculty of

Mechanical Engineering, Kobe / Royal Institute of Technology, Stockholm, Sweden / RWTH

Fraunhofer Institut für Lasertechnik, Aachen, Germany / Technical University Brno, Brno, Czech

Republic / Budapest University of Technology and Economics, Budapest, Hungary / Slovak Technical

University Kosice, Bratislava, Slovakia / University of Applied Sciences – Technikum, Vienna, Austria

/ University of Novi Sad, Novi Sad, Serbia / University of Sarajevo, Sarajevo, Bosnia and Herzegovina

http://www.daaam.info/


/ Boku University Vienna, Vienna, Austria / Technical University Kosice, Kosice, Slovakia / University

of Kobe, Faculty of Mechanical Engineering, Kobe, Japan / University of Liverpool, Liverpool, United

Kingdom / University of Maribor, Faculty of Economics, Maribor, Slovenia / University of Maribor,

Faculty of Mechanical Engineering, Maribor, Slovenia / University of Mostar, Mostar, Bosnia and

Herzegovina / University of Rijeka, Rijeka, Croatia / Danube University, Krems, Austria / University

of Ulsan, Ulsan Korea / University of Zadar, Zadar, Croatia / University of Zagreb, Zagreb, Croatia

Academy of Sciences

1. Croatian Academy of Sciences and Arts, Founding member of CIM-Section, Croatian Academy of

Sciences and Arts, Zagreb, Croatia, September 22, 1992

2. International Academy of Engineering, Moscow, Academicians since 2002

3. President and founder of Central European Branch of International Academy of Engineering 2011

4. Member of Armenian Academy of Engineering, Erevan, Armenia, 2015

Societies and Associations: Initiator / Founder

1. Proponent, Initiator and coordinator for founding of International JAVA Club, Vice-president, Club is

founded at International Congress object//component´97, Vienna, Imperial Palace on 25th

November 1997

2. Initiator and coordinator for founding of University Network of DAAAM International

3. Initiator, founder and chairman of Scientific Committee for Technical Studies of Danube Rectors´

Conference, Founded at Danube Rectors´ Conference, University of Leoben, Leoben, September 24,

1996, Austria; Pilot Projects: Inter University Doctoral Studies / Virtual University

4. Founding member of CIM-Section, Croatian Academy of Sciences and Arts, Zagreb, Croatia,

September 22, 1992

5. Danube Adria Association for Automation and Manufacturing, DAAAM International, Vienna,

Austria, Founder and President since 1990

6. ÖIAV -1848 Österreichischer Ingenieur- und Architekten Verein, (Austrian Society of Engineers and

Architects), Division Mechanical Engineering - Founder and Chairman section Robotics since 1990,

Vienna, Austria

References

1. Listed in "Who is who in Croatia", WHO´S WHO Verlag, Zagreb, 2012

2. Who is Who in Europe, 1st Edition, 2002, WhoEurope Int. Publishing Inc. London.U.K.

3. Yearbook of International Oragnisations, 38th Edition, 2001/2002, Bruxelles, Belgium

4. Kürschners Deutscher Gelehrten-Kalender 2003, (German Intellectials Calender 2003), 19the

Edition, Vol. 1,2 and 3, ISBN 3-598-23607-7, K.G. Saur Verlag, München, 2003

5. Who is who in Finance and Industry, Marquis Who´sWho´s, 33rd Edition, 2002-2003

6. Who is who in the World 1998-1999

7. Listed in Who is who in Science and Technology, Marquis Who is Who, 4th Edition, 1998-1999

8. Listed in Croatian Lexicon, (Hrvatski leksikon) First Edition, Vol. 1 (A-K), ISBN 953-96728-1-3, Ed. A.

Vujic, Zagreb 1996, Croatia

9. Listed in "Wissenschaftslexikon Österreich - Personen", Verlag Edition Praesens, Wien 1996

10. Listed in "Who´s who in Austria 1995 Edition", WHO´S WHO Verlag, Essen, 1996

11. Listed in "Who is who in Croatia", Golden Marketing, ISBN 953-6168-00-6, Zagreb, 1993

12. Listed in "The World Yearbook of Robotics Research and Development", "World Index of Robotics

Researchers, Kogan Page, London 1986, Second Edition


13. Listed in "World Index of Robotics Researchers", The World Yearbook of Robotics Research and

Development, Kogan Page, London 1985, First Edition


Consulting

1. Festo, Berkheim, Germany, Executive Adviser and Festo Project Director, responsible for the

international cooperation with Universities, Academies of sciences and all other institutions where

the engineering knowledge will be generated, systematized and given from individuals to group and

from generation to generation.

2. KHS GmbH, Germany

3. HSTEC High Speed Technique, Zadar, Croatia

4. Skoda Auto as, Mlada Boleslav, Czech Republic

5. UNIDO, United Nations Industrial Development Organization, UNO City, Vienna

6. Braincon Technologies, Vienna, Austria

7. Euro Laser Academy, Wien, Austria

8. DATALOGIC, Bologna - Vienna, Austria

9. BRUCK Trading, Vienna, Austria

10. BIT, Bureau for International Research and Technology Cooperation, Vienna, Austria

Scientific and Professional Societies

1. British Robot Association, BRA, Kempstone Bedford, England (since 1981)

2. Senior Member - Robot Institute of America, Robotics International, Society of Manufacturing

Engineers, Dearborn, Michigan, USA (since 1982)

3. Verein Deutscher Ingenieure, VDI, Düsseldorf, BRD (since 1984)

4. Japan Industrial Robot Association, JIRA, Tokyo, Japan (since 1985)

5. Croatian Society of Engineers, Zagreb, Croatia

6. Slovenian Society Informatica Ljubljana, Slovenia

7. American Association for Artificial Intelligence, AAAI Los Alamitos, California, USA (since 1990)

8. DAAAM International Vienna (since 1990)

9. Österreichische Gesellschaft für Artificial Intelligence, Vienna, Austria (since 1989)

10. The Society for Computer Simulation, San Diego, California, USA (since 1989)

11. Danube Adria Association for Automation and Metrology, DAAAM International, Vienna, Austria,

Founder and President since 1990

12. Österreichischer Ingenieur- und Architekten Verein, Founder and Chairman section Robotics since

1990, Vienna, Austria. Vice president of division Maschinenwesen since Juni 1992

13. Korema, Zagreb, Croatia (since 1991)

14. International Federation on Production Research, since 1994

15. The Union of Machine Engineers of Russia, since 2010

Important Industrial Projects

1. Design of flexible assembly system for the assembly of 8000 electrical motors á day, Flender Austria

Antriebstechnik ATB, Knittelfeld

2. Optimization of the flow of the material, Böhler Werke AG, Werk Mürzzuschlag

3. Design of Flexible production system for Kone Sowitsch Just-in-Time Lift Factory

4. Design of flexible Manufacturing System for the concern Engel, Sankt Valentin

5. Optimisation of the family of industrial robots for the concern Voest-Alpine, Linz

6. Optimisation of Flexible Assembly Transport System, Philips, Austria

7. Design of heavy industrial robot for the Simmering-Graz-Pauker company


International projects:

1. Joint European Projects: (Erasmus, Leonardo, Tempus, Comett II, CEEPUS and CEEPUS II).

2. Initiator und University Network Coordinator for CEEPUS Project "Assembly Automation" A-104 1999-2002 und "Intelligent Manufacturing & Automation" since 2002

3. International Austrian Bilateral Research Projects: (Austrian partner in the bilateral projects between Austria and: Slovak Republic / Mexico / Russia / Thailand / Japan / Romania / Italy and Ukraine)

4. Synergy Network: Fonder and international coordinator of International University Network for cooperation with Russian speaking technical universities and Company Festo. Company supports universities with high-tech equipment and knowledge from the bright fields of automation for the education of next generation of engineers in the fields of automation, mechatronics and robotics on Festo equipment. Company supports over DAAAM International partner universities in the realization of their national and international mission. Members: Festo Company, MEI Moscow, OmskGTU - Omsk, BGTU – Sank Petersburg, SevNTU – Sevastopol, KarGTU – Karaganda, FEFU – Vladivostok.

International Journals

1. International Journal of Advanced Robotic Systems, ISSN 1729-8806 (2004). One of the founders and Editor in Chief (2004-2008). Web of Science Journal - Thomson Reuters.

2. International Journal of Simulation Modelling ISSN 1726-4529 (2002). One of the founders and Editor. Web of Science Journal- Thomson Reuters.

3. DAAAM International Scientific Book ISSN 1726-9687 (2002). Founder (2003) and Editor in Chief 4. International Journal „Vallis Aurea“, ISSN 2412-5210, Founder (2015) and one of two Editor in Chief. 5. Member of Editorial Board at twelve International Journals (including: Journal of Intelligent

Manufacturing, Chapman & Hall, London, ISSN 0956-5515) 6. Reviewer at more than 20 indexed International Journals

International Conferences, Congresses, Symposiums and Workshops

1. Main organiser for more than 60 large international conferences 2. Member of International Program Committees at more than 150 conferences 3. Invited lectures more than 170 in 24 countries 4. Editor of more than 95 proceedings (many of them are indexed in ISI CPCI, Web of Science,

Thomson Reuters, Scopus), annals and books

Univ. Prof. Dipl.-Ing. Dr. techn. Dr.mult.h.c.Prof.h.c.

Branko Katalinic


LIST OF EDITED PUBLICATIONS (1990-2013) PROCEEDINGS OF INTERNATIONAL CONFERENCES, BOOKS AND ANNALS

(THE LIST IS NOT COMPLETED)

1. Proceedings of 24th DAAAM International Symposium on Intelligent Manufacturing and

Automation, Editor: B[ranko] Katalinic, published by Elsevier. The Publisher has produced the Procedia as a separate issue in Procedia Engineering ISSN 1877-7058 www.elsevier.com/locate/procedia. All papers are available online at www.sciencedirect.com with free of charge downloads.

2. DAAAM International Scientific Book 2013, Abbreviated key title: DAAAM int. sci. Book, ISSN 1726- 9687, ISBN 978-3-901509-94-0, hard cover, Publisher DAAAM International Vienna, Editor: B[ranko] Katalinic, Vienna 2013

3. Annals of DAAAM for 2012 & Proceedings of the 23rd International World DAAAM Symposium : "Intelligent Manufacturing & Automation: Power Of Knowledge And Creativity", 23-26th November 2011, Vienna, Austria, ISSN 1726-9679, ISBN 978-3-901509-83-4, Referred/indexed in Scopus, Editor: B[ranko] Katalinic, Published by DAAAM International, Vienna, Austria 2012


5. Annals of DAAAM for 2011 & Proceedings of the 22nd International World DAAAM Symposium : "Intelligent Manufacturing & Automation: Power Of Knowledge And Creativity", 23-26th November 2011, Vienna, Austria, ISSN 1726-9679, ISBN 978-3-901509-83-4, hard cover, 1608 Authors / 837 Published papers, Referred/indexed in Scopus, Editor: B[ranko] Katalinic, Published by DAAAM International, Vienna, Austria 2011


7. Annals of DAAAM for 2010 & Proceedings of the 21st International World DAAAM Symposium : "Intelligent Manufacturing & Automation: Focus on Interdisciplinary Solutions", 20-23rd October 2010, Zadar, Croatia, ISSN 1726-9679, ISBN 978-3-901509-73-5, hard cover, Referred/indexed in Conference Proceedings Citation Index / ISI Scientific Proceedings Thomson Reuters – Web of Knowledge, Editor: B[ranko] Katalinic, Published by DAAAM International, Vienna, Austria 2010


9. Proceedings of the 2nd International Conference “Vallis Aurea”: Focus on Regional Development, 3rd September 2010, Pozega, Croatia, ISBN 978-3-901509-76-6, ISBN 978-953-7744-06-9, Editor: Katalinic, B[ranko], Published by Polytechnic of Pozega and DAAAM International Vienna, 2010

10. Annals of DAAAM for 2009 & Proceedings of the 20th International World DAAAM Symposium : Theory, Practice & Education", 25-28th November 2009, Vienna, Austria, ISSN 1726-9679, ISBN 978- 3-901509-70-4, hard cover, 1922 Authors / 974 Published papers, Referred/indexed in ISI Scientific Proceedings Thomson Reuters – Web of Knowledge, Editor: B[ranko] Katalinic, Published by DAAAM International, Vienna, Austria 2009


12. Proceedings of the 14th DAAAM International Workshop “CA Systems and Technologies”, 8 – 10th December 2009, Žilina, Slovakia, ISBN 978-3-901509-82-7, Editors: Kuric I[van], Katalinic B[ranko], Published by University of Zilina, CUT Cracow, DAAAM International Vienna, 2009

http://www.elsevier.com/locate/procedia

http://www.elsevier.com/locate/procedia

http://www.sciencedirect.com/


13. Advanced Problems in Production Management, Authors: Polajnar A[ndrej]; Kalpic B[ranko]; Leber M[arjan]; Kremljak Z[vonko]; Buchmeister B[orut]; Pizmoht P[etja]; Vujica Hercog N[atasa] & Palcic I[ztok], DAAAM Publishing Series – Management Science Editor: B[ranko] Katalinic, ISBN 3-901509- 81-X, DAAAM International Vienna, Vienna, 2009

14. Annals of DAAAM for 2008 and Proceeding of the 19th International DAAAM Symposium"Intelligent Manufacturing & Automation: Focus on Next Generation of Intelligent Systems and Solutions", 22- 25th October 2008, Trnava, Slovakia, ISSN 1726-9679, ISBN 978-3-901509-68-1, 1496 Authors / 781 Published papers, Referred/indexed in ISI Scientific Proceedings Thomson Reuters – Web of Knowledge, Editor: B[ranko] Katalinic, Published by DAAAM International, Vienna, Austria 2008

15. Proceedings of the 13th DAAAM International Workshop “CA Systems and Technologies”, 6 – 8th October 2008, Cracow, Poland, ISBN 978-83-7242-481-5, Editors: Duda J[an], Kuric I[van], Katalinic B[ranko], Published by CUT Cracow, University of Zilina, DAAAM International Vienna, 2008

16. DAAAM International Scientific Book 2008, Abbreviated key title: DAAAM int. sci. Book, ISSN 1726- 9687, ISBN 978-3-901509-66-7, 1006 pages, hard cover, Publisher DAAAM International Vienna, Editor: B[ranko] Katalinic, Vienna 2008

17. Proceedings of the 1st International Conference “Vallis Aurea”:Focus on Regional Development, 19th September 2008, Pozega, Croatia, ISBN 978-3-901509-60-5, ISBN 978-953-98762-7-0, Editor: Katalinic, B[ranko], Published by Polytechnic of Pozega and DAAAM International Vienna, 2008

18. Proceedings of the 2nd International Conference on Additive Technologies, DAAAM International Specialized Conference, 17-18th September 2008, Ptuj, Slovenia, ISBN 3-901509-72-0, ISSN1992- 5085, Editors: Drstvensek I[gor] & Katalinic B[ranko] & Dolinsek S[lavko], Published by DAAAM International Vienna, Austria, 2008

19. Joze Balic & Niko Majdandzic: "Digit@l F@ctory”, DAAAM Publishing series - Manufacturing technology, Editor: B[ranko] Katalinic, ISBN 3-901509-67-4, DAAAM International Vienna, Vienna 2008

20. Annals of DAAAM for 2007 and Proceeding of the 18th International DAAAM Symposium Intelligent Manufacturing & Automation: Focus on Creativity, Responsibility, and Ethics of Engineers", 24-27th October 2007, Zadar, Croatia, ISSN 1726-9679, ISBN 3-901509-58-5, 803 Authors / 419 Published papers, Referred/indexed in ISI Scientific Proceedings Thomson Reuters – Web of Knowledge, Editor: B[ranko] Katalinic, Published by DAAAM International, Vienna, Austria 2007

21. Proceedings of the 12th DAAAM International Workshop “CA Systems and Technologies”, 17 – 19th October 2007, Žilina, Slovakia, ISBN 3-901509-56-9, Editors: Kuric I[van], Duda J[an], Katalinic B[ranko], Published by University of Zilina, CUT Cracow, DAAAM International Vienna, 2007

22. Proceedings of the 1st DAAAM International Specialized Conference on Additive Technologies, 20th April 2007, Celje, Slovenia, ISBN 3-901509-61-5, ISSN1992-5085, Editors: Drstvensek I[gor] & Katalinic B[ranko], Published by DAAAM International Vienna, Austria, 2007

23. DAAAM International Scientific Book 2007, Abbreviated key title: DAAAM int. sci. Book, ISSN 1726- 9687, ISBN 3-901509-60-7-X, 694 pages, hard cover, Publisher DAAAM International Vienna, Editor: B[ranko] Katalinic, Vienna 2007

24. Iztok Palcic: Industrial Clusters, DAAAM International, Editor: B. Katalinic, ISBN-10 3-901509-80-1; ISBN-13: 978-3-901509-80-3, DAAAM International Publishing, Vienna, 2007

25. Annals of DAAAM for 2006 and Proceeding of the 17th International DAAAM Symposium"Intelligent Manufacturing & Automation: Focus on Mechtronics and Robotics", 8-11th November 2006, Vienna, Austria, ISSN 1726-9679, ISBN 3-901509-57-7, 521 Authors / 230 Published papers, Referred/indexed in ISI Scientific Proceedings Thomson Reuters – Web of Knowledge, Editor: B[ranko] Katalinic, Published by DAAAM International, Vienna, Austria 2006

26. Proceedings of the 11th DAAAM International Workshop “CA Systems and Technologies”, 2 – 4th October 2006, Cracow, Poland, ISBN 3-901509-56-9, Editors: Duda J[an], Kuric I[van], Katalinic B[ranko], Published by CUT Cracow, University of Zilina, DAAAM International Vienna, 2006

27. Proceedings of the 5th DAAAM International Conference on Advanced Technologies for Developing Countries, ATDC-2006, 28-30th June 2006, Rijeka, Croatia, ISBN 3-901509-54-2 (Book), ISBN3- 901509-55-0 (CD), ISBN 953-6326-45-0, Editors: Mikac T[onci] & Katalinic B[ranko], Published by University of Rijeka and DAAAM International Vienna 2006


28. Proceedings of the 11th International FMTÜ Conference for Young Researchers: Focus on IMS and Environmentally friendly technologies, 24-25th March 2006, Cluj -Napoca, Romania, ISBN 973- 82331-50-7, Editors: Gyenge C[saba] & Katalinic B[ranko], Published by DAAAM International Vienna, 2006

29. DAAAM International Scientific Book 2006, Abbreviated key title: DAAAM int. sci. Book, ISSN 1726- 9687, ISBN 3-901509-47-X, 692 pages, hard cover, Publisher DAAAM International Vienna, Editor: B[ranko] Katalinic, Vienna 2006

30. Proceedings of the 10th DAAAM International Workshop “CA Systems and Technologies”, 12 – 14th December 2005, Strecno - Zilina, Slovak Republic, ISBN 3-901509-51-8, Editors: Kuric I[van], Katalinic B[ranko], Published by University of Zilina, CUT Cracow, DAAAM International Vienna, 2005

31. Annals of DAAAM for 2005 and Proceeding of the 16th International DAAAM Symposium"Intelligent Manufacturing & Automation: Focus on Young Scientists and Researchers", 19-22nd October 2005, Opatija, Croatia, ISSN 1726-9679, ISBN 3-901509-46-1, 406 Authors / 202 Published papers, Referred/indexed in ISI Scientific Proceedings Thomson Reuters – Web of Knowledge, Editor: B[ranko] Katalinic, Published by DAAAM International, Vienna, Austria 2005

32. Proceedings of the 4th DAAAM International Conference on Advanced Technologies for Developing Countries, ATDC-2005, September, 21-24th, 2005, Slavonski Brod, Croatia, ISBN 3-901509-49-6 ISBN 953-6048-29-9, Editors: Kljain M[ilan], Katalinic B[ranko] & Budic I[van], Published by DAAAM International Vienna and J J Strossmayer University of Osijek, 2005

33. DAAAM International Scientific Book 2005, Abbreviated key title: DAAAM int. sci. Book, ISSN 1726- 9687, ISBN 3-901509-43-7, 728 pages, hard cover, Publisher DAAAM International Vienna, Editor: B[ranko] Katalinic, Vienna 2005

34. Annals of DAAAM for 2004 and Proceeding of the 15th International DAAAM Symposium"Intelligent Manufacturing & Automation: Globalisation - Technology - Men - Nature", 3-6th November 2004, Vienna, Austria, ISSN 1726-9679, ISBN 3-901509-42-9, 508 Authors / 259 Published papers, Referred/indexed in ISI Scientific Proceedings Thomson Reuters – Web of Knowledge, Editor: B[ranko] Katalinic, Published by DAAAM International, Vienna, Austria 2004

35. Proceedings of the 9th DAAAM International Workshop “CA Systems and Technologies, 5 - 6th October 2004, Cracow, Poland”, ISBN 83-7242-320-2, Editors: Duda J[an], Katalinic B[ranko], Published by CUT Cracow, University of Zilina, DAAAM International Vienna, 2004

36. Proceedings of the 3rd International Conference Business Systems Management UPS 2004, 23-24th September 2004, Mostar, Bosna and Herzegovina, ISBN 3-901509-24-0, Editors: Majstorovic V[lado], Katalinic B[ranko], Covic D[ragan], Visekruna V[ojo], Published by University of Mostar and DAAAM International Vienna, 2004

37. Proceedings of the 3rd DAAAM International Conference on Advanced Technologies for Developing Countries, ATDC-2004, June 23-26, 2004, Split, Croatia, ISBN 3-901509-41-0, Editors: Katalinic B[ranko] & Veza, I[vica] ], Published by DAAAM International Vienna and University of Split, 2004

38. Proceedings of the 4th International DAAAM Conference "Industrial Engineering – Innovations as Competitive Edge for SME", 29-30th April 2004, Tallinn Technical University, Estonia, ISBN 9985- 894-59-6, Editors: Papstel J[yri], Katalinic B[ranko], Published by Tallinn Technical University, DAAAM Estonia and DAAAM International Vienna, 2004

39. DAAAM International Scientific Book 2004, Abbreviated key title: DAAAM int. sci. Book, ISSN 1726- 9687, ISBN 3-901509-38-0, 730 pages, hard cover, Publisher DAAAM International Vienna, Editor: B[ranko] Katalinic, Vienna 2004.

40. Zvonko Kremljak: "Decision making under risk”, DAAAM International University Book, Editor: B[ranko] Katalinic, ISBN 3-901509-44-5, DAAAM International Vienna, Vienna 2004

41. Zvonko Kremljak & Borut Buchmeister: "Uncertainty and Development of Capabilities", DAAAM Publishing Series – Management Science Editor: B[ranko] Katalinic, ISBN 3-901509-55-0, DAAAM International Vienna, Vienna, 2004

42. Annals of DAAAM for 2003 and Proceeding of the 14th International DAAAM Symposium"Intelligent Manufacturing & Automation: Focus on Reconstruction and Development", 22-25th October 2003, Sarajevo, Bosnia and Herzegovina, ISSN 1726-9679, ISBN 3-901509-34-8, 504 Authors / 255


Published papers, Referred/indexed in ISI Scientific Proceedings Thomson Reuters – Web of Knowledge, Editor: B[ranko] Katalinic, Published by DAAAM International, Vienna, Austria 2003

43. Proceedings of the 8th DAAAM International Workshop “CA Systems and Technologies”, 29th September - 1st October 2003, Strecno - Zilina, Slovak Republic, ISBN 3-901509-39-9, Editors: Kuric I[van], Katalinic B[ranko], Published by University of Zilina, CUT Cracow, DAAAM International Vienna, 2003

44. Proceedings of the 2nd DAAAM International Conference on Advanced Technologies for Developing Countries, ATDC-2003, 25-28th June 2003, Tuzla, Bosnia and Herzegovina, ISBN 3-901509-35-6, Editors: Katalinic B[ranko] & Tufekcic, Dz[emo], Published by DAAAM International Vienna and University of Tuzla, 2003

45. DAAAM International Scientific Book 2003, Abbreviated key title: DAAAM int. sci. Book, ISSN 1726- 9687, ISBN 3-901509-36-4, 654 pages, hard cover, Publisher DAAAM International Vienna, Editor: B[ranko] Katalinic, Vienna 2003.

46. Dragan Covic: "Inventivnost Tima – Vodic za menedzere”, (in Croatian) DAAAM International University Book, Editor: B[ranko] Katalinic, ISBN 3-901509-25-4, DAAAM International Vienna and University of Mostar, Mostar – Vienna, 2003

47. Proceedings of the 4th DAAAM Workshop "Human Factor and Environmentalist", 5th December 2002, Kosice, Slovakia, ISBN 3-901509-37-2, Editors: Katalinic B[ranko], Wessely E[mil], Published by Technical University of Kosice and DAAAM International Vienna, 2002

48. Annals of DAAAM for 2002 and Proceeding of 13th International DAAAM Symposium "Intelligent Manufacturing & Automation: Learning from Nature", 23-26th October 2002, Vienna, Austria, ISBN 3-901509-29-1, 573 Authors / 314 Published papers, Referred/indexed in ISI Scientific Proceedings Thomson Reuters – Web of Knowledge, Editor: B[ranko] Katalinic, Published by DAAAM International, Vienna, Austria 2002

49. Proceedings of the 7th DAAAM International Workshop “CA Systems and Technologies”, 8-9th October 2002, CUT Cracow, Poland, ISBN 3-901509-33-X, , Editors: Duda J[an], Katalinic B[ranko], Published by CUT Cracow, University of Zilina, DAAAM International Vienna, 2002

50. Proceedings of the 1st DAAAM International Conference on Advanced Technologies for Developing Countries, ATDC-2002, 12-14the September 2002, Slavonski Brod, Croatia, ISBN 3-901509-32-1; ISBN 953-7611-64-X, Editors: Katalinic B[ranko] & Kljajin M[ilan], Published by DAAAM International Vienna and Strossmayer University of Osijek, 2002

51. DAAAM International Scientific Book 2002, ISBN 3-901509-30-5, hard cover, 713 pages, Publisher DAAAM International Vienna, Editor: B[ranko] Katalinic, Vienna, 2002

52. Proceedings of the 3rd DAAAM Workshop "Intelligent Manufacturing Systems", 29 November 2001, Kosice, Slovakia, ISBN 3-901509-31-3, Editors: Katalinic B[ranko], Wessely E[mil], Published by Technical University of Kosice and DAAAM International Vienna, 2001

53. Annals of DAAAM for 2001 and Proceeding of 12th International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Precision Engineering", 24-27th October 2001, Jena, Germany, ISBN 3-901509-19-4, 586 Authors / 266 Published papers, Editor: B[ranko] Katalinic, Published by DAAAM International, Vienna, Austria 2001

54. Proceedings of the 6th DAAAM International Workshop “CA Systems and Technologies”, 25-26th September 2001, Sulov, Slovak Republic, ISBN 3-901509-27-5, Editors: Kuric I[van], Katalinic B[ranko], Published by University of Zilina, CUT Cracow, DAAAM International Vienna, 2001

55. Vlado Majstorovic: "Upravljanje proizvodnjom i projektima – Production and Project Management”, (in Croatian) DAAAM International University Book, Editor: B[ranko] Katalinic, ISBN 3-901509-23-2, DAAAM International Vienna and University of Mostar, Mostar – Vienna, 2001

56. Dragan Covic, Vlado Majstorovic, Vojo Visekruna: "Poslovni sustavi – Business Systems”, (in Croatian) DAAAM International University Book, Editor: B[ranko] Katalinic, ISBN 3-901509-22-4, DAAAM International Vienna and University of Mostar, Mostar – Vienna, 2001

57. Proceedings of the 2nd International Conference Business Systems Management UPS 2001, 31st May - 2nd June 2001, Mostar, Bosna and Herzegovina, ISBN 3-901509-26-7, Editors: Majstorovic V., Katalinic B[ranko], Covic D[ragan], Visekruna V[ojo], Published by University of Mostar and DAAAM International Vienna, 2001


58. Proceedings of the 2nd DAAAM Workshop "Intelligent Manufacturing Systems", 30 November 2000, Kosice, Slovakia, ISBN 3-901509-18-6, Editors: Katalinic B[ranko], Wessely E[mil], Published by Technical University of Kosice and DAAAM International Vienna, 2000

59. Annals of DAAAM for 2000 and Proceeding of 10th International DAAAM Symposium"Intelligent Manufacturing & Automation: Men – Machine - Nature", 19-21st October 2000, Opatija, Croatia, ISBN 3-901509-13-5, 517 Authors / 254 Published papers, Editor: B[ranko] Katalinic, Published by DAAAM International, Vienna, Austria 2000

60. Proceedings of the 5th DAAAM International Workshop “CA Systems and Technologies”, 28-29th September 2000, Cracow, Poland, ISBN 3-901509-16-X, Editors: Duda J[an], Kuric I[van], Katalinic B[ranko], Published by CUT Cracow, University of Zilina, DAAAM International Vienna, 2000

61. 2nd International Conference on Industrial Engineering – Activities Targeted to SME, 27 - 29th April 2000, Tallinn Technical University, Estonia, ISBN 9985-894-21-9, Editors: J[yri] Papstel / Katalinic B[ranko], Published by Tallinn Technical University and DAAAM International Vienna, 2000

62. Borut Buchmeister: "English-Slovene Glossary of Terms used in Production Engineering and Production Management", DAAAM Publishing series - Manufacturing technology, Editor: B[ranko] Katalinic, ISBN 3-901509-17-8, DAAAM International Vienna, Vienna 2000

63. Annals of DAAAM for 1999 and Proceeding of 10th International DAAAM Symposium"Intelligent Manufacturing & Automation: Past – Present - Future", 21-23rd October 1999, Vienna, ISBN 3- 901509-10-0, 619 Authors / 311 Published papers, Editor: B[ranko] Katalinic, Published by DAAAM International, Vienna, Austria 1999

64. Proceedings of the 4th DAAAM International Workshop “CA Systems and Technologies: Advanced Methodology of Process Planning”, 12-13th October 1999, Zilina, Slovak Republic, ISBN 3-901509- 12-7, Editors: Kuric I[van], Katalinic B[ranko], Published by University of Zilina, CUT Cracow, DAAAM International Vienna, 1999

65. Joze Balic: "Contribution to Integrated Manufacturing", DAAAM Publishing series - Manufacturing technology, Editor: B[ranko] Katalinic, ISBN 3-901509-03-8, DAAAM International Vienna, Vienna 1999

66. Joze Balic: "FMS: Development Structure, Operation, Handling, Tooling", DAAAM Publishing series - Manufacturing technology, Editor: B[ranko] Katalinic, ISBN 3-901509-20-8, DAAAM International Vienna, Vienna 1999

67. Proceedings of the 9th International DAAAM Symposium "Intelligent Manufacturing, Automation & Networking", 22-24th October 1998, Napoca, Cluj - Napoca, Romania, ISBN 3-901509-08-9, 515 Authors / 257 Published papers, Editor: B[ranko] Katalinic, Published by DAAAM International, Vienna, Austria 1998

68. Proceedings of the 8th International DAAAM Symposium "Intelligent Manufacturing & Automation", 23-25th October 1997, Dubrovnik, Croatia, ISBN 3-901509-04-6, 346 Authors / 192 Published papers, Editor: B[ranko] Katalinic, Published by DAAAM International, Vienna, Austria 1997

69. Proceedings of the 1st International Conference Business Systems Management UPS 1997, 26-27th September 1997, Mostar, Bosna and Herzegovina, ISBN 3-901509-06-02-X, Editors: Majstorovic V., Katalinic B[ranko], Covic D[ragan], Visekruna V[ojo], Published by University of Mostar and DAAAM International Vienna, 1997

70. Proceedings of the 1st International Conference "Industrial Engineering - Actual Activities", 25-27th September 1997, Tallinn Technical University, Tallinn, Estonia, ISBN 3-901509-07-0, Editors: Papstel J[yri], Katalinic B[ranko], Published by Tallinn Technical University and DAAAM International Vienna, 1997

71. Proceedings of the 7th International DAAAM Symposium "Product & Manufacturing: Flexibility, Integration, Intelligence“, 17-19th October 1996, Vienna, Austria, ISBN 3-901509-02-X, 440 Authors / 250 Published papers, Editor: B[ranko] Katalinic, Published by DAAAM International, Vienna, Austria 1996

72. Proceedings of the 6th International DAAAM Symposium "Intelligent Manufacturing Systems", 26 - 28th October 1995, Cracow, Poland, ISBN 3-901509-01-1, 297 Authors / 212 Published papers, Editor: B[ranko] Katalinic, Co-Editors: Osanna H[erbert] P[eter], Gawlik J[ozef], Published by DAAAM International, Vienna, Austria 1995


73. Proceedings of the 5th International DAAAM Symposium "Automation and Metrology: Challenge and Chance", 27-28th October 1994, Maribor, Slovenia, ISBN 3-901509-00-3, ISBN 86-435-0084-4, 391 Authors / 259 Published papers, Editors: Katalinic B[ranko], Osanna H[erbert] P[eter], Balic J[oze], Cus F[ranci], Published by DAAAM International, Vienna, Austria 1994

74. Proceedings of the 4th International DAAAM Symposium "Automation and Metrology: Man, Technology, Environment", 16-18th September 1993, Brno, Czechia, Czechoslovakia, 299 Authors / 177 Published papers, Editors: Katalinic B[ranko], Osanna H[erbert] P[eter], Published by DAAAM International, Vienna, Austria 1993

75. Proceedings of the 3rd International DAAAM Symposium "Flexible and Intelligent Automation", 4- 6th November 1992, Budapest, Hungary, 157 Authors / 99 Published papers, Editor: B[ranko] Katalinic, Published by DAAAM International, Vienna, Austria 1992

76. Proceedings of the 2nd International DAAAM Symposium "Flexible Automation", 9-13th December 1991, Strbske Pleso, Slovakia, Czechoslovakia, ISBN 80-233-0225-6, 153 Authors / 92 Published papers, Editors: Sebo D[usan], Wessely E[mil], Kovacik J[an], Katalinic B[ranko], Published by House of Technology, Bratislava, Slovakia, Czechoslovakia, 1991

77. Proceedings of the 1st International DAAAM Symposium „Automatization and Measurement Technique“, 5th November 1990, Vienna, Austria, 132 Authors / 77 Published papers, Editor: B[ranko] Katalinic, Published by DAAAM International, Vienna, Austria 1990

Univ. Prof. Dipl.-Ing. Dr. techn. Dr.mult.h.c.Prof.h.c.

Branko Katalinic

Documents

(AN OVERVIEW IS NOT COMPLETED AND NOT …Branko Katalinic Curriculum Vitae Page 1 Head Professor Dr h.c.multi.Prof.h.c.Dr sc. Branko Katalinić President of DAAAM International Vienna