60
Pilot Operated Pressure Relief Valves Series 200, 400, 400 Iso-Dome, 500, 700 and 800 Series 200, 400, 400 Iso-Dome, 500, 700 and 800 Pilot Operated Pressure Relief Valves ANDERSON GREENWOOD flow control Introducing Our New Higher Capacity Main Valve Design Introducing Our New Higher Capacity Main Valve Design

Anderson Greenwood Series 200, 400, 500, 700, 900

  • Upload
    hafzi

  • View
    3.238

  • Download
    23

Embed Size (px)

DESCRIPTION

PSV datasheet normally we use for relief rate calcs

Citation preview

Page 1: Anderson Greenwood Series 200, 400, 500, 700, 900

Pilot Operated Pressure Relief ValvesSeries 200, 400, 400 Iso-Dome, 500, 700 and 800Series 200, 400, 400 Iso-Dome, 500, 700 and 800

Pilot Operated Pressure Relief Valves

ANDERSON GREENWOODflow control

Introducing

Our New Higher Capacity

Main Valve DesignIntroducing

Our New Higher Capacity

Main Valve Design

Page 2: Anderson Greenwood Series 200, 400, 500, 700, 900

Anderson Greenwood POPRV CatalogSeries 200, 400, 400 Iso-Dome, 500, 700, and 800

© 1996/rev. 1998, Anderson Greenwood reserves the right to change product designs and specifications without notice. i

In the highly specialized field of pressurerelief devices, no manufacturer can matchthe diversified products and experience of Anderson, Greenwood. With more designs than any other worldwide manu-facturer, Anderson Greenwood’s producttechnology solves applications from themost severe problem to very basic serviceconditions. These designs include a hightemperature metal seated pilot valve, pre-mium performance spring operatedvalves, API 526 flanged conventional and

balanced bellows valves and an extensiveiron and bronze product range. In additionto our well-known product quality, ISO9001 certifications have been awarded toboth our Stafford, Texas, and Manchester,England, manufacturing plants, ensuringthe ability to deliver products that meetcustomers’ precise requirements well intothe 21st century and beyond.

ANDERSON GREENWOODflow control

Page 3: Anderson Greenwood Series 200, 400, 500, 700, 900

Anderson Greenwood POPRV CatalogSeries 200, 400, 400 Iso-Dome, 500, 700, and 800

© 1996/rev. 1998, Anderson Greenwood reserves the right to change product designs and specifications without notice. iii

Contents

Features and Benefits .......................................................................... 2 – 3

How to Select a Valve Type ................................................................. 4

Application Guide ................................................................................. 4

Selection

Pilot Types

Series 200 ...................................................................................... 5 – 7Series 400 ...................................................................................... 8 – 10Series 400 Iso-Dome ..................................................................... 11 – 12Series 500 ...................................................................................... 13 – 14Series 700 ...................................................................................... 15 – 18Series 800 ...................................................................................... 19 – 21

Sizing

How to Size a Valve ......................................................................... 22

Sizing Formulas ................................................................................ 23

Sizing Factors ................................................................................... 24 – 29

Valve Orifice Areas ........................................................................... 30

Ordering

How to Order a Valve ....................................................................... 31

Standard Main Valve Materials of Construction ............................... 32 – 33

Series 200 Pilot Standard Materials of Construction ........................ 34 – 35

Series 400 Pilot Standard Materials of Construction ........................ 36 – 37

Series 500 Pilot Standard Materials of Construction ........................ 38 – 39

Series 700 Pilot Standard Materials of Construction ........................ 40 – 41

Series 800 Pilot Standard Materials of Construction ........................ 42 – 43

Inlet Flange Ratings .......................................................................... 44

Recommended Soft Goods Limits .................................................... 44

Model Numbering ............................................................................. 45

Accessories and Options .................................................................. 46 – 50

Dimensions and Weights .................................................................. 51 – 55

Outlet Flange Ratings ....................................................................... 56

I S O 9 0 0 1

NATIONALACCREDITATION

OF CERTIFICATIONBODIES

LLOY

D'S

REG

ISTER QUALITY

CO

MPA

NY

Pilot Operated Pressure Relief Valve CatalogRevised June 1998

Catalog: POPRV-US.96

Page 4: Anderson Greenwood Series 200, 400, 500, 700, 900

Anderson Greenwood POPRV CatalogSeries 200, 400, 400 Iso-Dome, 500, 700, and 800

© 1996/rev. 1998, Anderson Greenwood reserves the right to change product designs and specifications without notice. 1

Ordering (to order the valve)

Construct a ModelNumber

(Page 45)

Review Accessories and Options

(Pages 46 - 50)

ReviewDimensions and Weights

(Pages 51 - 55)

How to Use This Catalog

Anderson Greenwood is the established and consistent leader in pilotoperated, pressure relief valve technology.More than three decades of pilot valve experience enables us to produce, supply,and support safety relief valves that:

• assure leak-free system operation veryclose to PRV set pressure

• relieve consistently within code tolerances

• reseat bubble-tight after a short andstable blowdown

• operate through many relief cycleswithout maintenance

This catalog is divided into three primaryparts, which provide step-by-step instruc-tions that make it easy for you to select avalve type, determine the proper orificearea, and order the valve.

Part 1, Selection, helps you determine the type of valve that best suits your application.

Part 2, Sizing, provides the informationyou need to choose the correct valve ori-fice area. (Sizing is actually part of valveselection, but since sizing is such an im-portant factor in selection, a separatesection is provided to help you make theproper choice.)

Part 3, Ordering, explains how to selectand order the specific model number, afteryou have chosen the appropriate valvetype and size.

UseApplication Guide

(Page 4)

Selection (to narrow your choice)

UseSizing Formulas

(Page 23)

ReviewOrifice Areas

(Page 30)

ReviewSizing Factors(Pages 24 - 29)

Sizing (to identify orifice size required)

Page 5: Anderson Greenwood Series 200, 400, 500, 700, 900

Anderson Greenwood POPRV CatalogSeries 200, 400, 400 Iso-Dome, 500, 700, and 800

© 1996/rev. 1998, Anderson Greenwood reserves the right to change product designs and specifications without notice. 2

• Soft Seat Design. Provides repeatablebubble-tight performance before andafter each relief cycle.

• Metal-to-Metal Seat Design. Providespilot valve performance in high temper-ature service.

• Bubble-tight Seats Near Set Pressure.Allows higher system operating pres-sure and, therefore, maximum processoutput; not as sensitive to vibrationaland pulsating service; reduces productloss.

• Pop Action Available. No main valvethrottling, which helps prevent freeze-ups in cryogenic or refrigerant typeservices.

• Modulation Action Available.Minimized product loss per relief situa-tion; reduced environmental pollution;avoids oversizing consequences; notas sensitive to inlet pressure losses aspop action.

• Field Test Connection. Quick simpleverification of set pressure while valveremains in service.

• Balanced Design. Lift not affected byback pressure; no expensive and frag-ile bellows required as with directspring valves.

• Externally Adjustable Blowdown.Allows blowdown adjustment with valvein service; no costly removal of valve orsystem shutdown required.

• Patented, Piston Wedge Ring.Prevents resonant chatter; no resultantsevere valve damage, lost product orhazard to personnel.

• Full Lift at Set Pressure. No overpres-sure required for full lift; allows D.O.T.installation to be set higher thanMaximum Allowable OperatingPressure (MAOP) when pop action isused.

• Replaceable Soft Seats and Seals.All seats and seals are easily andquickly renewable; no expensive, time-consuming lapping required.

Why Specify PilotOperated Pressure ReliefValves?

• Reduced Installation Costs

• Reduced Product Loss

• Increased Production Levels

• Reduced Maintenance Costs

• Reduced Environmental Pollution

• Increased Operating Income

Features and Benefits

Page 6: Anderson Greenwood Series 200, 400, 500, 700, 900

Anderson Greenwood POPRV CatalogSeries 200, 400, 400 Iso-Dome, 500, 700, and 800

© 1996/rev. 1998, Anderson Greenwood reserves the right to change product designs and specifications without notice. 3

Higher Maximum Set PressuresAnderson Greenwood’s POPRVs are ableto operate at considerably higher set pres-sures than is possible with conventionalSRVs. In some cases one POPRV can re-place five conventional SRVs therebyconsiderably reducing capital and installation costs.

Lower Height ProfileBecause the Anderson GreenwoodPOPRV does not use a spring to hold the main valve seat closed, considerableheight savings are achieved in the valvedesign. The same pilot valve is used for all main valve sizes providing significantheight saving particularly on larger andhigher pressure valves. This enables thePOPRVs to be used in situations wherespace is at a premium.

Weight SavingsAs valve size and set pressure increases,a larger spring is needed to keep the seat of a conventional SRV closed — increasing the weight of the valve. Signifi-cant weight savings are provided by theAnderson Greenwood POPRV, whichuses system pressure via the pilot valve to maintain seat tightness. These weightsavings allow cost reductions on plantconstruction and, in particular, on offshoreoil and gas platforms.

Max. Set Pressure Comparison

Valve Orifice Area Direct Spring Anderson Greenwood in [mm] in2 [cm2] Operated, psig [barg] Pilot Operated, psig [barg]

8 x 10 Full Bore38.96 [251.37] N/A 1480+ [102.0+]

[200 x 250 Full Bore]

8T10 26.00 [167.75] 300 [20.7] 1480+ [102.0+]

6R8 16.00 [103.23] 300 [20.7] 1480+ [102.0+]

4P6 6.38 [41.16] 1000 [69.0] 3705+ [255.5+]

3K4 1.83 [11.86] 2220 [153.1] 3705+ [255.5+]

Height Comparison

Valve Rating Direct Spring Anderson Greenwood Heightin [mm] Operated, in [mm] Pilot Operated, in [mm] Saving

8 x 10150# 57 [1448] 30 [762] 47%

[200 x 250]

6 x 8[150 x 200]

300# 43 [1092] 26 [660] 40%

4 x 6300# 37 [940] 23 [584] 38%

[100 x 150]

3 x 4[80 x 100]

600# 34 [864] 20 [508] 41%

2 x 3600# 23 [584] 19 [483] 19%

[50 x 80]

Weight Comparison

Valve Rating Direct Spring Anderson Greenwood Weightin [mm] Operated, lb [kg] Pilot Operated, lb [kg] Saving

8 x 10150# 750 [340.9] 421 [191.4] 44%

[200 x 250]

6 x 8[150 x 200]

300# 480 [218.2] 264 [120.0] 45%

4 x 6300# 230 [104.5] 160 [72.7] 30%

[100 x 150]

3 x 4[80 x 100]

600# 160 [72.7] 92 [41.8] 42%

2 x 3600# 70 [31.8] 53 [24.1] 24%

[50 x 80]

Features and Benefits

Page 7: Anderson Greenwood Series 200, 400, 500, 700, 900

Anderson Greenwood POPRV CatalogSeries 200, 400, 400 Iso-Dome, 500, 700, and 800

© 1996/rev. 1998, Anderson Greenwood reserves the right to change product designs and specifications without notice. 4

Application Guide

Options

Set Pressure Valve Seriespsig [barg] 200 400 500 700 800

15 – 720 [1.03 – 49.64]1 X

15 – 1480 [1.03 – 101.97] X

25 – 6170 [1.72 – 413.70]3 X

50 – 1200 [3.45 – 82.74] X

1481 – 6170 [102.12 – 425.42] X

Valve Action

Pop X X

Modulating X X X

Service

Gas/Vapor X X X X X

Liquid2 X X X

Steam X X

Process Temperature, °F [°C]

Ambient to +1000 [Ambient to +538]4 X

-65 to +500 [-54 to +260] X

-423 to +500 [-252 to +260] X

-65 to +515 [-54 to +268] X

-40 to +400 [-40 to +205] X

Notes

1. 11⁄2-inch x 3-inch [40 x 80 mm] Type 546has 25 psig [1.72 barg] minimum set.

2. Use Type 249, 259, 269 for cryogenic liquid(set pressure range for this valve type is 25to 1440 psig [1.72 to 99.3 barg]).

3. Higher pressures available on special order.

4. Higher temperatures available on special order.

5. Not all valves are available for service at the extreme limits for both temperature and pressure simultaneously.

How to Select a Valve Type

To determine which pilot operated safetyrelief valve type is most appropriate foryour application, please use the followingguidelines:

1. In the Application Guide (below), notewhich valve types seem most appropri-ate for your application.

2. Read the associated descriptive andoperating information in the catalogdedicated to that type of valve (Series200, 400, 500, 700 or 800).

3. Using the formulas in Part 2, Sizing(page 25), determine the required orifice area for your service conditionsand select the orifice area that suitsyour application.

4. If you have been able to determine apilot operated valve type and orificearea that suits your application, refer to Part 3, Ordering (page 33), to selectand order a specific model number. Ifyou were not able to find a valve typeto meet your application needs, pleasecontact your Anderson Greenwoodrepresentative, or our factory direct, for assistance.

Page 8: Anderson Greenwood Series 200, 400, 500, 700, 900

Anderson Greenwood POPRV CatalogSeries 200, 400, 400 Iso-Dome, 500, 700, and 800

© 1996/rev. 1998, Anderson Greenwood reserves the right to change product designs and specifications without notice. 5

Series 200 Pop Action Safety Valve

Anderson Greenwood’s Series 200 popaction, safety valve, with non-flowing pilot,provides system overpressure protectionyou can count on. Since its 1966 introduc-tion, it has been continuously refined andremains the standard against which allother pilot operated valves are compared.This valve is well suited for gas, vapor,and most mixed phase services, includingdirty and/or wet services. The Series 200is available with effective orifice areas of0.110 through 38.96 inch2 [0.710 through251.3 cm2], valve inlet sizes 1-inchthrough 8-inch [25 mm through 200 mm],set pressures from 25 to over 6000 psig[1.72 to over 413.7 barg], and continuousservice temperatures from -423°F to+500°F [-253°C to +260°C].

Features and Benefits• Balanced Design. Proper valve opera-

tion and lift are unaffected by backpressure. Costly and fragile metal bel-lows are not required.

• Ease of Adjustment. Adjustment forset pressure allows accurate and de-pendable setting. Externally adjustableblowdown, reducing costly removal ofvalve or system downtime.

• ASME Section VIII Code Stamp.Certified National Board capacities forgas service assures user of indepen-dent third party flow rate verification.

• Reduced Maintenance Cost. Softseats greatly extend service life, mak-ing costly and time consuming metalseat lapping unnecessary.

• Suited for Dirty or Wet Service.Non-flowing pilot minimizes entrance ofdirt and formation of hydrates in thepilot. Due to low velocities within thepilot and supply tubing, most particleswill drop out upstream of pilot inletscreen. Optional cartridge type pilot fil-ter is available for extremely dirtyservices.

• Increased System Output. Becauseof total valve tightness to at least 95percent of set pressure, the systemcan be operated nearer set pressurewithout valve leakage, resulting ingreater system throughput.

• Unique Field Test Capability. Thisoption allows accurate set pressureverification with valve in service. Nosystem isolation block valve or rupturedisc required.

• Vertical Pilot Mounting. Ensures consistent set pressure and blowdown,as contrasted to erratic, horizontallymounted pilots.

• Reduced Product Loss and Pollution.Soft seats for premium tightness be-fore and after relief cycles.

• Rugged Bracket Pilot Mounting.Extremely rigid mounting protectsagainst vibration and careless han-dling. Shake table proven.

• Full Lift at Set Pressure. AllowsD.O.T. installation to be set higher than Maximum Allowable OperatingPressure (MAOP), resulting in in-creased system throughput.

Page 9: Anderson Greenwood Series 200, 400, 500, 700, 900

Anderson Greenwood POPRV CatalogSeries 200, 400, 400 Iso-Dome, 500, 700, and 800

© 1996/rev. 1998, Anderson Greenwood reserves the right to change product designs and specifications without notice. 6

Series 200 Operations

Normal Closed Position

Relieving Position

PilotDischarge

100% of set

100% of set

DomeDome

Main Valve

PilotSetPressureAdjustment

Relief Seat

BlowdownSeat

BlowdownAdjustment

Main Valve Seat

System

Piston

Piston Seal

100% of set

100% of set

Dome

System

0%

Page 10: Anderson Greenwood Series 200, 400, 500, 700, 900

Anderson Greenwood POPRV CatalogSeries 200, 400, 400 Iso-Dome, 500, 700, and 800

© 1996/rev. 1998, Anderson Greenwood reserves the right to change product designs and specifications without notice. 7

OperationIn the normal closed position, full systempressure is sensed at the pressure pick-up in the main valve inlet. This pressure is transmitted through the pilot and intothe dome (volume above the main valvepiston). Because the piston seal area isgreater than the main seat sealing area,the net force on the piston is downward,keeping the valve tightly closed. Thehigher the system pressure, the greaterthe downward force on the piston —exactly the opposite of direct spring operated valves.

When the pilot senses set pressure, its re-lief seat snaps open and the blowdownseat snaps closed simultaneously, ventingthe dome pressure through the pilot reliefseat to atmosphere. This allows the mainvalve to open fully at set pressure. Theblowdown seat is held tightly closed duringthe relief cycle until the desired systemblowdown is achieved, at which time theblowdown seat snaps open and the reliefseat snaps closed simultaneously. Thisfully repressures the dome to systempressure and closes the main valve.

The valve reseat pressure is dependentupon the lift of the spindle off the reliefseat. Higher spindle lift results in morespring compression and a higher spindleclosing force stored in the pilot spring. Thehigher the lift, the shorter the blowdown(higher valve reseat pressure). The spin-dle lift and thus blowdown are externallyadjustable by raising or lowering the blow-down assembly of the pilot, thus changingthe spindle travel.

Specifications• Non-flowing pilot.

• Replaceable main valve seat locatedon piston to take wear.

• Pilot mounted on severe duty bracket.

• Vertical pilot mounting.

• Externally adjustable blowdown.

• Options, such as auxiliary filter, spikesnubber, and unloader mounted onmain valve with severe duty brackets.

• Field replaceable main valve nozzle.

Series 200 Specifications

Pressure

Pressure

Do

wn

Fo

rce

on

Mai

n V

alve

Pis

ton

0 Set

Mai

n V

alve

Pis

ton

Lif

t

0 Set

Clo

sing

Ope

ning

100% Lift

3% MinimumBlowdown

Page 11: Anderson Greenwood Series 200, 400, 500, 700, 900

Anderson Greenwood POPRV CatalogSeries 200, 400, 400 Iso-Dome, 500, 700, and 800

© 1996/rev. 1998, Anderson Greenwood reserves the right to change product designs and specifications without notice. 8

The Series 400 modulating valve, withnon-flowing pilot, incorporates an ad-vanced design in pilot operated valves.Under process conditions, both pilot andmain valve can be tight as high as 98 per-cent of set pressure. The main valve liftsproportionally, according to demand, re-stricting product loss to only that whichmust be relieved to prevent process pres-sure from exceeding the code allowance.

The Series 400 valve is well suited for gasand/or liquid services, including dirtyand/or wet services. The modulating ac-tion is strongly preferred for liquid reliefbecause it eliminates the destructive ef-fects of ‘liquid hammer.’ The Series 400valve is available with the following: effective orifice areas of 0.110 through38.96 inch2 [0.710 through 251.3 cm2]valve inlet sizes 1-inch through 8-inch [25 mm through 200 mm], set pressurebetween 15 and 1480 psig [1.03 and102.0 barg], and continuous service tem-peratures from -65°F to +500°F [-54°C to+260°C].

Features and Benefits• Unique Field Test Capability. Allows

accurate set pressure verification withvalve in service. No system isolationvalve or rupture disc required.

• Reduced Product Loss andPollution. Soft seats for premium tightness before and after relief cycles.Modulating action relieves minimumproduct to prevent overpressure.

• ASME Section VIII Code Stamp.Certified National Board capacities for both gas and liquid service assuresuser of independent third party flowrate verification.

• Suited for Dirty or Wet Service.Non-flowing pilot minimizes entranceof dirt and formation of hydrates inpilot. Due to low velocities within thepilot and supply tubing, most particleswill drop out upstream of pilot inletscreen. Optional cartridge type pilot fil-ter is available for extremely dirtyservices.

• Rugged Bracket Pilot Mounting.Extremely rigid mounting protectingagainst vibration and careless han-dling. Shake table proven.

• Reduced Noise. Modulating actionminimizes flow and resultant noise during normal system upset, reducingnoise abatement costs.

• Increased System Output. Becauseof valve tightness to 98 percent of setpressure, the system can be operatednearer set pressure without valve leak-age, resulting in greater systemthroughput.

• Reduced Maintenance Costs. Softseats greatly extend service life, mak-ing costly and time-consuming metalseat lapping unnecessary.

• Ease of Adjustment. Single adjust-ment for set pressure allows accurateand dependable setting.

• Balanced Design. Proper valve operation and lift are unaffected by back pressure. Costly and fragile metalbellows are not required.

* Patent Protected

Series 400* Modulating Valve

Page 12: Anderson Greenwood Series 200, 400, 500, 700, 900

Anderson Greenwood POPRV CatalogSeries 200, 400, 400 Iso-Dome, 500, 700, and 800

© 1996/rev. 1998, Anderson Greenwood reserves the right to change product designs and specifications without notice. 9

Series 400 Specifications

Set PressureAdjustment

Main Valve

Dome

Piston

FeedbackPiston

Sense DiaphragmInletSeat

OutletSeat

OperationWith no system pressure, the pilot inletseat is open and the outlet seat is closed.As pressure is admitted to the main valveinlet, it enters the pilot through a filterscreen. Pressure is then transmittedthrough passages in the feedback piston,past the inlet seat, into the main valvedome, which causes the main valve pistonto remain closed.

As system pressure increases and ap-proaches valve set pressure, it actsupward on the sense diaphragm, with thefeedback piston also moving upward toclose the inlet seat. This seals in the mainvalve dome pressure, since the outlet seatis also closed. A small, further increase insystem pressure opens the outlet seat,partially venting the main valve domepressure. This reduced dome pressureacts on the unbalanced feedback piston toreduce feedback piston lift, tending to‘lock in’ the dome pressure. Thus, at anystable inlet pressure, there will be no pilotflow (i.e., zero leakage).

As inlet pressure rises above set pres-sure, dome pressure reduction will providemodulating action of the main valve pistonproportional to the process upset. Thespool/feedback piston combination willmove, responding to system pressure, to alternately allow pressure in the mainvalve dome to increase or decrease. Thismoves the main valve piston to the exactlift that will keep system pressure constantat the required flow. Full main valve lift,and therefore full capacity, is achievedwith relatively little overpressure. As system pressure decreases below setpressure, the feedback piston movesdownward and opens the inlet seat to admit system pressure to the dome. Thiscloses the main valve. Due to the ex-tremely small pilot flow, the pilot ongas/vapor valves normally discharges to atmosphere through a weather and bug-proof fitting. Pilots for liquid service valveshave their discharge piped to the mainvalve outlet.

Below Set Pressure With Main Valve Closed

Pressure

Mai

n V

alve

Pis

ton

Lift

Set

Clo

sing

100% Lift

Ope

ning

Pressure

Dow

n F

orce

on

Mai

n V

alve

Pis

ton

0 Set

95% Set Pres.,Minimum

Page 13: Anderson Greenwood Series 200, 400, 500, 700, 900

Anderson Greenwood POPRV CatalogSeries 200, 400, 400 Iso-Dome, 500, 700, and 800

© 1996/rev. 1998, Anderson Greenwood reserves the right to change product designs and specifications without notice. 10

Series 400 Specifications

Above Set Pressure With Main Valve Fully Open

Specifications• Non-flowing pilot.

• Single point set pressure adjustment.

• Replaceable main valve seat, locatedon piston to take wear.

• Feedback mechanism in pilot, indepen-dent of primary pressure sensingmechanism, to ensure smooth modula-tion of main valve.

• Indicator button for field test capability.

• Field replaceable main valve nozzle.

At or Slightly Above Set Pressure Main Valve Partially Open and Modulating

Page 14: Anderson Greenwood Series 200, 400, 500, 700, 900

Anderson Greenwood POPRV CatalogSeries 200, 400, 400 Iso-Dome, 500, 700, and 800

© 1996/rev. 1998, Anderson Greenwood reserves the right to change product designs and specifications without notice. 11

The Iso-Dome accessory for the 400 pilotprovides protection of the critical pilot inter-nals from the process media. The pilot isactuated by the process fluid and is ASMESection VIII Code stamped for gas and liquidservice. The Iso-Dome 400 pilot is availablewith the following: effective orifices areas of0.110 through 38.96 inch2 [0.710 through251.3 cm2 ], valve inlet sizes 1-inch through8-inch [25 mm through 200 mm], set pres-sure between 15 and 1480 psig [1.03 and102.1 barg], and continuous service temper-ature from -65°F to +500°F [-54°C to+260°C].

Features and Benefits• Critical Pilot Internals and Main

Valve Dome Protected from ProcessMedia. Expands the application of pilotoperated valve technology.

• Valve is Fail-safe. Meets ASME coderequirements.

• Allows System Operating Pressureto be Near Set Pressure. SRV tight-ness is maintained, resulting in greatersystem throughput.

• All Adjustments are Factory Sealed.Just add the clean gas supply for simpleand inexpensive field installation.

• Modulating Action. Minimizes fugitiveemissions, product release, product loss,and noise.

• Valve Operation Insensitive to BackPressure. Costly and fragile metal bel-lows not required.

• Unique Field Test Capability. Setpressure may be verified while valve re-mains in service protecting the system.No system isolation valve or rupture discrequired.

* Patent Protected

Iso-Dome* Series 400 Valve

Page 15: Anderson Greenwood Series 200, 400, 500, 700, 900

Anderson Greenwood POPRV CatalogSeries 200, 400, 400 Iso-Dome, 500, 700, and 800

© 1996/rev. 1998, Anderson Greenwood reserves the right to change product designs and specifications without notice. 12

Dome

Main Valve Pilot

Set PressureAdjustment

SenseDiaphragm

Regulator(Supplied By Anderson

Greenwood, Mounted on PRV)

Piston

Clean Gas Supply(N2, Air, etc.) (Supplied by User)

Clean Gas Supply

Process

Iso-Dome* Series 400 Valve

Page 16: Anderson Greenwood Series 200, 400, 500, 700, 900

Anderson Greenwood POPRV CatalogSeries 200, 400, 400 Iso-Dome, 500, 700, and 800

© 1996/rev. 1998, Anderson Greenwood reserves the right to change product designs and specifications without notice. 13

The Anderson Greenwood Series 500 is aunique soft seated safety relief valve de-signed to handle higher temperatures. Itwas created with a specific design objec-tive: to decrease the leakage associatedwith metal-seated safety relief valvesunder extreme operating temperature con-ditions.

The result is a modulating, soft-seated, pilot operated valve offering premiumtightness with the ability to handle temper-atures from -65°F to 515°F [-54°C to268°C] and a set pressure range of 15 to 720 psig [1.03 to 49.6 barg].

The soft seat in the Series 500 main valveis more resistant to particulate damagethan a metal seat, has a longer servicelife, and can be quickly replaced while thevalve body remains installed in the line.

Its unique design enables the main valveto be tight at pressures up to set point.After relieving and reseating, it stays bub-ble-tight, cycle after cycle. Applications forthe Series 500 include hot water, steam(ASME section VIII Unfired PressureVessels), hot hydrocarbon vapors or liq-uids, and corrosive services.

Features and Benefits• Reduced Product Loss and

Pollution. Soft seats for premium tight-ness before and after relief cycles.

• All Teflon® Soft Goods. All seats andseals are Teflon® providing additionalchemical compatibility with the ladingfluid.

• Increased System Output. Becauseof total valve tightness to at least 95percent of set pressure, the systemcan be operated nearer to set pressurewithout valve leakage. The result isgreater system production capability.

• Reduced Maintenance Costs.Resilient seats greatly extend servicelife. Costly and time consuming metalseat lapping is unnecessary.

• Balanced Design. Proper valve opera-tion and lift are unaffected by backpressure. Costly and fragile metal bel-lows are not required.

• ASME Section VIII Stamp. CertifiedNational Board capacities for steam,gases, and liquids assures user of in-dependent third party flow rateverification.

• Unique Field Test Capability. Allowsaccurate set pressure verification withvalve in service. No system isolationvalve or rupture disc is required. Singleindicator button is available.

• Reduced Noise. Modulating actionminimizes flow and resultant noise during normal system upset reducingnoise abatement costs.

• Ease of Adjustment. Adjustment forset pressure allows accurate and de-pendable setting.

Note

1. Teflon® is a registered trademark of the E. I.duPont de Nemours Company.

Series 500 Soft Seated Valve

Page 17: Anderson Greenwood Series 200, 400, 500, 700, 900

OperationIn normal operation, the system pressureacts on the area contained by the mainvalve seat at the bottom of the free-float-ing differential area piston and on the topof the piston. Since the top of the piston is larger than the bottom (seat area), thereis a large downward net force holding thepiston closed. Under static conditions, theseating force increases as the systempressure increases and approaches setpoint.

When the set pressure is reached, the pilot opens and partially depressurizes thedome. This reduces the force on the top ofthe piston to the point where the upwardforce on the seat area can overcome thereduced downward loading. This causesthe piston to lift, resulting in modulatedflow through the main valve.

When the relief demand has been satis-fied, the pilot closes, full system pressureis diverted to the dome, and the pistonmoves downward, closing the main valve.

A patented, pressure responsive pistondrag system in the larger Series 500valves eliminates resonant chatter and the severe valve and/or piping damage it can cause. The wedge ring creates apressure-actuated sliding friction force between the piston and liner, preventingresonant chatter.

Specifications• Durable but replaceable Teflon® seat

in main valve, located on piston to takethe wear. A totally captive seat designeliminates seat extrusion at elevatedtemperatures.

• Teflon® seals throughout main valveand pilot for optimum chemical resis-tance, such as needed for variouschemicals in boiler feed water.

• Dual diaphragm pilot for minimum firstleak-to-relief pressure.

• Single point set pressure adjustment.

• Flowing style pilot for even warm-up ofpilot as system pressure approachesset pressure, resulting in consistent op-timum performance.

• Indicator button for field test capability.

• Field replaceable main valve nozzle.

Anderson Greenwood POPRV CatalogSeries 200, 400, 400 Iso-Dome, 500, 700, and 800

© 1996/rev. 1998, Anderson Greenwood reserves the right to change product designs and specifications without notice. 14

Do

wn

Fo

rce

on

Mai

n V

alve

Pis

ton

Set

Pressure

0

Pressure

Mai

n V

alve

Pis

ton

Lif

t

Set

Clo

sing

100% Lift

Ope

ning

Series 500 Specifications

Pilot

Piston Seal

Seat

Sense Pickup

Pilot DischargePiped to MainValve Outlet

Field TestConnection(optional)

Dome

DomePressure

Liner

Piston Seal

Wedge Ring

Piston

Page 18: Anderson Greenwood Series 200, 400, 500, 700, 900

Anderson Greenwood POPRV CatalogSeries 200, 400, 400 Iso-Dome, 500, 700, and 800

© 1996/rev. 1998, Anderson Greenwood reserves the right to change product designs and specifications without notice. 15

The Series 700 pilot operated safety valveis unique as an all metal seated pilot andmain valve. This extends the use of pilot technology to temperatures up to1000°F [538°C]. The valve is suitable forsteam and/or gas service. The Series 700is available with effective areas of 0.503through 26.00 in2 [3.245 through 167.7cm2].

Features and Benefits• All Metal-to-Metal Seating Surfaces.

Trim specifically designed for hightemperature service, plus enhancedchemical compatibility.

• Patented Flexible Disc. Reduces impact wear while increasing seattightness.

• Dampened Trim. Dampening cham-bers control the opening and closingresponse, increasing valve cycle life.

• Non-Flowing Pilot. Reduces seatwear and minimizes entrance of dirtand particulates in the pilot.

• Adjustable Blowdown. Blowdowncan be adjusted between 3% and 15%by turning the blowdown adjustmentsleeve. Upper and lower blowdownrings and pins are not required, savingtime, parts and costs.

• ASME Section VIII Code Stamp.Certified National Board capacities forsteam and gas service assures user ofindependent third party flow rate verifi-cation.

• Unique Field Test Capability, this op-tion allows accurate set pressureverification with valve in service. Nosystem isolation block valve or rupturedisc required.

700 Manifolded Dual Pilots*(Optional)• For maximum operating conditions, it

is recommended to use dual pilots withbuilt-in switching mechanism.

• The safety lock allows the operator toisolate only one pilot while the activepilot protects the system.

• In-service testing and replacement ofpilot under operating condition with fullsystem protection.

* Patented

Series 700 Safety Valve

Dual Pilots

Manifold

Changeover valves

Safety lock

Field test connection

Page 19: Anderson Greenwood Series 200, 400, 500, 700, 900

Series 700 Specifications

Anderson Greenwood POPRV CatalogSeries 200, 400, 400 Iso-Dome, 500, 700, and 800

© 1996/rev. 1998, Anderson Greenwood reserves the right to change product designs and specifications without notice. 16

Class 300 Design Scope

MaterialCodePressure and Temperature Rating

1000[538]

800[427]

600[316]

400[204]

200[93]

200[13.8]

400[27.6]

600[41.4]

800[55.2]

S1WCB

S3WC6

S2WCB

S1WCB

S2WCB

S3WC6

00

Pressure, psig [barg]

Tem

per

atu

re, °

F [

°C]

Class 150 Design Scope

1000[538]

800[427]

600[316]

400[204]

200[93]

100[6.9]

200[13.8]

300[20.7]

400[27.6]

°F [

°C]

S1WCB

psig [barg]

S2WCB

MaterialCode

Pressure and Temperature Rating

S1WCB

S2WCB

00

Specifications• Non-flowing pilot.

• Vertical pilot mounting.

• Externally adjustable blowdown.

• Field replaceable nozzle.

• ANSI pressure class 150, 300 and 600.

1000[538]

800[427]

600[316]

400[204]

200[93]

S1WCB

200[13.8]

400[27.6]

600[41.4]

800[55.2]

1000[69.0]

1200[82.8]

S3WC6

S2WCB

MaterialCode

Pressure and Temperature Rating

0

S1WCB

S2WCB

S3WC6

0

Pressure, psig [barg]

Tem

per

atu

re, °

F [

°C]

Class 600 Design Scope

Page 20: Anderson Greenwood Series 200, 400, 500, 700, 900

Anderson Greenwood POPRV CatalogSeries 200, 400, 400 Iso-Dome, 500, 700, and 800

© 1996/rev. 1998, Anderson Greenwood reserves the right to change product designs and specifications without notice. 17

Series 700 Operation

OperationSteam ServiceIn the closed position, when operatingbelow set point, the valve internal pressureis equal to the system pressure and the pis-ton is pressure balanced.

System pressure is directed to three keyareas of the valve:

1. The Dome, via the dome charging ori-fice;

2. The Pilot, via the integral pressure sens-ing connection and the external pilot inletsensing line; and

3. The Unloader, via the sensing line con-nections from the pilot dome and theintegral sensing connection from thedome through the cap.

The seating force is produced by systempressure acting on the internal exposeddisc surface area. As system pressure in-creases, the seating force increasesproviding maximum seat tightness up to setpoint when the valve opens.

When system pressure reaches set pointand overcomes the pilot spring force, thepilot pops open and sets into motion fourkey reactions:

1. The normally open reseat piston movesinto full lift and closes against the blow-down seat preventing further systempressure from flowing through the pilot.This is the non-flow pilot feature.

2. Unloader dome pressure is ventedthrough the pilot vent to atmosphere. Withthe internal pilot pressure relieved, thepilot spring is now sensing system over-pressure in the pilot inlet sensing line viathe spindle-disc-spacer rod-reseat piston.

3. The venting of unloader dome pressurecreates a pressure imbalance whichopens the unloader piston. Main domepressure is now being vented into thevalve outlet, and the pressure drop back-seats the drain plunger, preventingsystem pressure from charging the dome.

Blowdown Seat (Closed)

Relief Seat(Open)

Unloader PistonUnloader Dome

Spacer

Pilot Disc

System Pressure

Piston

Pressure Sensing (Integral)Main Valve

BlowdownSeat (Open)

Relief Seat(Closed)

Pilot Vent

Disc

Nozzle

Dome

Pilot

Unloader

Dome Charging Orifice

System Pressure

Drain Plunger

Normal Closed Position

Relieving Position

Page 21: Anderson Greenwood Series 200, 400, 500, 700, 900

Anderson Greenwood POPRV CatalogSeries 200, 400, 400 Iso-Dome, 500, 700, and 800

© 1996/rev. 1998, Anderson Greenwood reserves the right to change product designs and specifications without notice. 18

4. The depressurization of the piston domepressure produces a pressure imbalancewhich moves the piston/disc assemblyoff the nozzle seat. As the media beginsto exit through the valve outlet, thedownstream disc surface area is sub-jected to system overpressure and thepiston/disc assembly goes into full lift in-stantaneously.

When system overpressure has been fullyrelieved, the pilot spring closes the pilotdisc onto the relief seat. The valve nowgoes into the blowdown phase and setsinto motion the above mentioned four keyreactions in reverse:

1.The pilot disc-spacer rod pushes the re-seat piston off the blowdown seat andthe internals of the pilot spring-spindle-disc assembly are once again sensingsystem pressure.

2.With the pilot closed and the pilot ventisolated, system pressure is now di-rected to the unloader dome.

3.Recharging the unloader dome causesthe unloader piston to close and stopsthe depressurization of the piston domepressure.

4.System pressure is now charging thepiston dome via the dome charging ori-fice. The pressure imbalance is nowclosing the piston/disc assembly.

With the main disc closed and outlet pres-sure on the disc eliminated, the systempressure acting on the internal exposedarea of the disc once again re-establishesmaximum seat tightness.

Air, Gas or Vapor ServiceFor air, gas and vapor service, the assem-bly of the main valve and pilot is modifiedas follows:

1.The unloader is deleted and the pilotdome connected directly to cap.

2.The unloader discharge port in the valveoutlet is plugged.

3.The dome charging orifice in the pistonis deleted.

4.A snubber is installed at the pilot inlet todampen system pulsations.

The operation of the main valve and pilotin air, gas and vapor service is the sameas the steam valve.

The pilot is able to vent and depressurizethe main dome with sufficient speed toprovide proper opening and closing perfor-mance without the use of an unloader.

For mixed phase flow, consult the factoryto determine if unloader is required.

Series 700 Operation

Piston

Pressure Sensing (Integral) Main Valve

Snubber

BlowdownSeat (Open)

Relief Seat(Closed)

Pilot Vent

Disc

NozzleDome

Pilot

System Pressure

Drain Plunger

Normal Closed Position

Page 22: Anderson Greenwood Series 200, 400, 500, 700, 900

Anderson Greenwood POPRV CatalogSeries 200, 400, 400 Iso-Dome, 500, 700, and 800

© 1996/rev. 1998, Anderson Greenwood reserves the right to change product designs and specifications without notice. 19

The Series 800 modulating valve utilizesthe most advanced design in pilot operatedvalves. The non-flowing, modulating pilotcan be set at pressures up to 6170 psig[425.52 barg]. Under these process condi-tions, the pilot and main valve can be tightup to 98 percent of set pressure.

Since the pilot is modulating, the mainvalve lifts proportionally according to de-mand, restricting product loss to only thatwhich needs to be relieved to prevent theprocess pressure from exceeding thecode allowance. The pilot provides stablelift even on hard liquid systems due to itsunique trim. The 800 Series can also beused in gases or mixed phase lading flu-ids, including dirty and/or wet services.

The Series 800 valve is available with thefollowing: effective orifice areas of 0.110through 9.489 in2 [0.710 through 61.21cm2], valve inlet sizes 1-inch through 4-inch [25 mm through 100 mm], set pres-sures between 1481 and 6170 psig[102.13 and 425.52 barg], and continuoustemperatures from -40°F to +400°F [-40°Cto + 205°C].

Features and Benefits• High Set Pressure Capability.

Provides modulating, non-flowing pilotvalve performance to 6170 psig[425.42 barg].

• Unique Field Test Capability. Allowsaccurate set pressure verification withvalve in service with minimal amount of test gas.

• Reduced Product Loss andPollution. Soft seats for premium tight-ness before and after relief cycles.Modulating action relieves minimumproduct to prevent overpressure.

• ASME Section VIII Code Stamp.Certified National Board capacities forboth gas and liquid service assuresuser of third party flow rate verification.

• Suited for Dirty or Wet Service.Non-flowing pilot minimizes entrance ofdirt and formation of hydrates in pilot.Due to low velocities within the pilotand supply tubing, most particles willdrop out upstream of pilot inlet screen.Optional cartridge type pilot filter isavailable for extremely dirty services.

• Rugged Bracket Pilot Mounting.Extremely rigid mounting protectsagainst vibration and careless han-dling.

• Reduced Noise. Modulating actionminimizes flow and resultant noise during normal system upset, reducingnoise abatement costs.

• Increased System Output. Becauseof valve tightness to 98 percent of setpressure, the system can be operatednearer set pressure without valve leak-age, resulting in greater systemthroughput.

• Ease of Adjustment. Single adjust-ment for set pressure allows accurateand dependable setting.

• Reduced Maintenance Costs. Softseats greatly extend service life, mak-ing costly and time-consuming metalseat lapping unnecessary.

• Balanced Design. Proper valve operation and lift are unaffected by back pressure. Costly and fragile metalbellows are not required.

Series 800 Modulating Valve

Page 23: Anderson Greenwood Series 200, 400, 500, 700, 900

Anderson Greenwood POPRV CatalogSeries 200, 400, 400 Iso-Dome, 500, 700, and 800

© 1996/rev. 1998, Anderson Greenwood reserves the right to change product designs and specifications without notice. 20

OperationWith no system pressure, the pilot inletseat is open and the outlet seat is closed.As pressure is admitted to the main valveinlet, it enters the pilot through a filterscreen. Pressure is then transmittedthrough passages in the feedback piston,past the inlet seat, into the main valvedome, which causes the main valve pistonto remain closed.

As system pressure increases and ap-proaches valve set pressure, it actsupward on the sense O-ring seal, with the feedback piston moving upward toclose the inlet seat. This seals in the mainvalve dome pressure, since the outlet seatis also closed. A small, further increase insystem pressure opens the outlet seat,partially venting the main valve domepressure. This reduced dome pressureacts on the unbalanced feedback piston to reduce feedback piston lift, tending to‘lock in’ the dome pressure. Thus, at anystable inlet pressure, there will be no pilotflow (i.e., zero leakage).

As inlet pressure rises above set pres-sure, dome pressure reduction willprovide modulating action of the mainvalve piston proportional to the processupset. The spool/feedback piston combi-nation will move, responding to systempressure, to alternately allow pressure inthe main valve dome to increase or de-crease. This moves the main valve pistonto the exact lift that will keep system pres-sure constant at the required flow. Fullmain valve lift, and therefore full capacity,is achieved with relatively little overpres-sure. As system pressure decreasesbelow set pressure, the feedback pistonmoves downward and opens the inlet seatto admit system pressure to the dome.This closes the main valve. The pilot ex-haust is always piped to the main valveoutlet.

Series 800 Operation

Main Valve

Dome

Tubed to MainValve Outlet

Sense Seal

Pilot Outlet Seal

Pilot Inlet Seal

Below Set Pressure With Main Valve Closed

Tubed to MainValve Outlet

FeedbackPiston

At or Slightly Above Set Pressure Main Valve Partially Open andModulating

Page 24: Anderson Greenwood Series 200, 400, 500, 700, 900

Anderson Greenwood POPRV CatalogSeries 200, 400, 400 Iso-Dome, 500, 700, and 800

© 1996/rev. 1998, Anderson Greenwood reserves the right to change product designs and specifications without notice. 21

Series 800 Specifications

Main Valve

Dome

Tubed to MainValve Outlet

Sense Seal

Pilot Outlet Seal

Pilot Inlet Seal

Above Set Pressure With Main Valve Fully Open

Pressure

Do

wn

Fo

rce

on

Mai

n V

alve

Pis

ton

0 Set

95% Set Pres.,Minimum

Pressure

Mai

n V

alve

Pis

ton

Lif

t

Clo

sing

100% Lift

Ope

ning

Set

Specifications• Non-flowing pilot.

• Single-point set pressure adjustment.

• Replaceable main valve seat, locatedon piston to take wear.

• Feedback mechanism in pilot, indepen-dent of primary pressure sensingmechanism, to ensure smooth modula-tion of main valve.

• Indicator button for field test capability.

• Field replaceable main valve nozzle.

Page 25: Anderson Greenwood Series 200, 400, 500, 700, 900

Anderson Greenwood POPRV CatalogSeries 200, 400, 400 Iso-Dome, 500, 700, and 800

© 1996/rev. 1998, Anderson Greenwood reserves the right to change product designs and specifications without notice. 22

Valves are selected on the basis of theirability to meet an expected relieving con-dition, flowing a sufficient amount of fluidto prevent excessive pressure increase.This means that the size of the valve orifice must be calculated taking the required flow, performance characteris-tics, lading fluid properties, and otherfactors into consideration.

The sizing procedure presented utilizesthe recommended practice of API 520Part I. The valve orifice areas and nozzledischarge coefficients shown are effectivevalues in that they are not specific to aparticular valve type. The use of theseeffective orifice areas and effectivenozzle discharge coefficients will al-ways allow for the selection of a valveorifice area that will meet or exceed therequired capacity.

The calculation of the actual certifiedvalve capacity can be performed with theAnderson Greenwood sizing software pro-gram enclosed in the catalog binder.

To select the minimum required orificearea that will flow the required capacity ofthe system you wish to protect, pleaserefer to the following information which ap-pears in this section:

1. Sizing Formulas

2. Correction Factors

3. Valve Orifice Areas

Once you have determined the requiredorifice area for your service conditions, refer to Part 3, Ordering (page 31), to select a specific valve model number.

How to Size a Valve

Page 26: Anderson Greenwood Series 200, 400, 500, 700, 900

Anderson Greenwood POPRV CatalogSeries 200, 400, 400 Iso-Dome, 500, 700, and 800

© 1996/rev. 1998, Anderson Greenwood reserves the right to change product designs and specifications without notice. 23

English Units Metric Units

A =W

A =W

––––––––– –––––––––51.5KP1KS 52.5KP1KS

Sizing Formulas

Formula Symbols

Symbol Description English Units Metric Units

A Calculated Orifice Area in 2 cm2

V Required Capacity, Gas SCFM Nm3/h

VL Required Capacity, Liquid U.S. gpm m3/h

W Required Capacity, Gas or Steam lb/h kg/h

G Specific Gravity — —

M Molecular Weight (M = 29 x specific gravity) — —

T Relief Temperature, (°R = °F + 460°; °K = °C + 273) °R °K

Z Compressibility Factor (if unknown, assume Z = 1.0) — —

Cpk Ratio of Specific heats (k= ––– ) — —

Cv

C Gas Constant (if unknown, assume C = 315) (page 25) — —

K Effective Nozzle Coefficient for 90% of Actual Capacity (page 32) — —

Ks Superheat Correction Factor (page 30, 31) — —

P Set Pressure psig barg

Inlet Flowing PressureP1 (P1 = P + Allowable Overpressure – Inlet Pressure Loss + Atmospheric Pressure)

psia bara

P2 Outlet Flowing Pressure psia bara

Kb Back Pressure Factor (page 26, 27) — —

PA

Inlet Flowing Pressurepsig barg

(PA = P + Allowable Overpressure – Inlet Pressure Loss)

PB Outlet Flowing Pressure psig barg

Steam Flow Liquid Flow

English Units Metric Units–– ––

A =VL √G

A = VL √G

–––––––––––– –––––––––––––––––––––– –––––––

38K √ PA – PB 5.094K √ PA – PB

Gas/Vapor Flow

English Units Metric Units

––– –––

A =W √TZ

A = 1.316 W √TZ

–––––––––––– –––––––––––––– ––CKP1Kb √M CKP1Kb √ M

or

––––– –––––

A =V √MTZ

A =V √MTZ

–––––––––––– ––––––––––––6.32 CKP1Kb 17.02 CKP1Kb

Page 27: Anderson Greenwood Series 200, 400, 500, 700, 900

Anderson Greenwood POPRV CatalogSeries 200, 400, 400 Iso-Dome, 500, 700, and 800

© 1996/rev. 1998, Anderson Greenwood reserves the right to change product designs and specifications without notice. 24

Values of M, k, and C For Representative Gases and Vapors

Gas or Vapor M k CMolecular Specific Gas

Weight Heat Ratio Constant

Acetylene (C2H2) 26 1.26 343

Air 29 1.40 356

Ammonia (NH3) 17 1.31 348

Argon (Ar) 40 1.67 378

Benzene (C6H6) 78 1.12 329

Butadiene (C4H6) 54 1.12 329

Carbon Dioxide (CO2) 44 1.28 345

Carbon Monoxide (CO) 28 1.40 356

Ethane (C2H6) 30 1.19 336

Ethylene (C2H4) 28 1.24 341

Freon 22 86.5 1.18 335

Helium (He) 4 1.66 377

Hexane (C6H14) 86 1.06 322

Hydrogen (H2) 2 1.41 357

Hydrogen Sulphide (H2S) 34 1.32 349

Methane (CH4) 16 1.31 348

Methyl Mercaptan (CH4S) 48.1 1.20 337

n-Butane (C4H10) 58 1.09 326

Natural Gas (SF = 0.60) 17.4 1.27 344

Nitrogen (N2) 28 1.40 356

Oxygen (O2) 32 1.40 356

Pentane (C5H12) 72 1.97 323

Propane (C3H8) 44 1.13 330

Propylene (C3H6) 42 1.15 332

Propylene Oxide (C3H6O) 58.1 1.21 338

Steam 18 1.31 348

Sulphur Dioxide (SO2) 64 1.29 346

VCM (C3H3CI) 62.5 1.18 335

Sizing

Page 28: Anderson Greenwood Series 200, 400, 500, 700, 900

Anderson Greenwood POPRV CatalogSeries 200, 400, 400 Iso-Dome, 500, 700, and 800

© 1996/rev. 1998, Anderson Greenwood reserves the right to change product designs and specifications without notice. 25

Sizing

k C

1.00 315

1.02 318

1.04 320

1.06 322

1.08 324

1.10 327

1.12 329

1.14 331

1.16 333

1.18 335

1.20 337

1.22 339

1.24 341

1.26 343

1.28 345

1.30 347

1.32 349

1.34 351

1.36 352

1.38 354

1.40 356

1.42 358

1.44 359

1.46 361

1.48 363

1.50 364

k C

1.52 366

1.54 368

1.56 369

1.58 371

1.60 372

1.62 374

1.64 376

1.66 377

1.68 379

1.70 380

1.72 382

1.74 383

1.76 384

1.78 386

1.80 387

1.82 388

1.84 390

1.86 391

1.88 392

1.90 394

1.92 395

1.94 397

1.96 398

1.98 399

2.00 400

2.02 401

Gas Constant, C

Page 29: Anderson Greenwood Series 200, 400, 500, 700, 900

Anderson Greenwood POPRV CatalogSeries 200, 400, 400 Iso-Dome, 500, 700, and 800

© 1996/rev. 1998, Anderson Greenwood reserves the right to change product designs and specifications without notice. 26

1. The curves above will vary from one size ofvalve and orifice combination to the other.The curves shown on this page represent

the most conservative back pressure correc-tion factor for all series of valves (exceptSeries 700) shown in this catalog. The sizing

software will utilize the actual back pressurecorrection factor for the valve selected.

Note

Back Pressure Correction Factor for Series 200, 400, 500 and 800

Sizing

1.0

0.9

0.8

0.7

0.6

0.5

0.4

0.3

0.2 0.3 0.4 0.5 0.6 0.7 0.8

k = 2.0

k = 1.8

k = 1.6

k = 1.4

k = 1.2

k = 1.0

Bac

k P

ress

ure

Fac

tor,

Kb

P2 /P1 = Absolute Pressure Ratio at Orifice

0.2

0.1

0

0.9 1.00.10

Page 30: Anderson Greenwood Series 200, 400, 500, 700, 900

Anderson Greenwood POPRV CatalogSeries 200, 400, 400 Iso-Dome, 500, 700, and 800

© 1996/rev. 1998, Anderson Greenwood reserves the right to change product designs and specifications without notice. 27

Sizing

1

0.98

0.96

0.94

0.92

0.9

0.88

0.86

0.4 0.45 0.5 0.55 0.6 0.65 .70

k = 2.0

k = 1.8

k = 1.6

k = 1.4

k = 1.2

k = 1.0

Bac

k P

ress

ure

Fac

tor,

Kb

P2/P1 = Absolute Pressure Ratio at Orifice

Back Pressure Correction Factor for Series 700 – Gas, Vapor

Note

1. When discharge piping other than the typical90 degree elbow is used, the piping and/orpressure vessel designer must determinethe maximum back pressure to properly select the outlet flange rating.

Page 31: Anderson Greenwood Series 200, 400, 500, 700, 900

Anderson Greenwood POPRV CatalogSeries 200, 400, 400 Iso-Dome, 500, 700, and 800

© 1996/rev. 1998, Anderson Greenwood reserves the right to change product designs and specifications without notice. 28

Steam Super Heat Correction Factor, KsSet Saturated Total Steam Temperature °F [°C]

Pressure Steam 280 300 320 340 360 380 400 420 440 460 480 500 520 540 560psig [barg] Temp.°F [°C] [138] [149] [160] [171] [182] [193] [205] [216] [227] [238] [249] [260] [271] [282] [293]

15 [1.03] 250 [121] 1.00 1.00 1.00 .99 .99 .98 .98 .97 .96 .95 .94 .93 .92 .91 .90

20 [1.38] 259 [126] 1.00 1.00 1.00 .99 .99 .98 .98 .97 .96 .95 .94 .93 .92 .91 .90

40 [2.76] 287 [142] 1.00 1.00 1.00 .99 .99 .98 .97 .96 .95 .94 .93 .92 .91 .90

60 [4.14] 308 [153] 1.00 1.00 .99 .99 .98 .97 .96 .95 .94 .93 .92 .91 .90

80 [5.52] 324 [162] 1.00 1.00 .99 .99 .98 .97 .96 .94 .93 .92 .91 .90

100 [6.90] 338 [170] 1.00 1.00 .99 .98 .97 .96 .95 .94 .93 .92 .91

120 [8.27] 350 [177] 1.00 1.00 .99 .98 .97 .96 .95 .94 .93 .92 .91

140 [9.65] 361 [183] 1.00 1.00 .99 .98 .96 .95 .94 .93 .92 .91

160 [11.0] 371 [188] 1.00 1.00 .99 .98 .97 .95 .94 .93 .92 .91

180 [12.4] 380 [193] 1.00 .99 .98 .97 .96 .95 .93 .92 .91

200 [13.8] 388 [198] 1.00 .99 .99 .97 .96 .95 .93 .92 .91

220 [15.2] 395 [202] 1.00 1.00 .9 .98 .96 .95 .94 .93 .92

240 [16.6] 403 [206] 1.00 .99 .98 .97 .95 .94 .93 .92

260 [17.9] 409 [210] 1.00 .99 .98 .97 .96 .94 .93 .92

280 [19.3] 416 [213] 1.00 1.00 .98 .97 .96 .95 .93 .92

300 [20.7] 422 [217] 1.00 .99 .98 .96 .95 .93 .92

350 [24.1] 436 [225] 1.00 1.00 .99 .96 .96 .94 .93

400 [27.6] 448 [231] 1.00 .99 .96 .96 .95 .93

450 [31.0] 460 [238] 1.00 .96 .96 .96 .94

500 [34.5] 470 [243] 1.00 .96 .96 .96 .94

550 [37.9] 480 [249] .97 .97 .97 .95

600 [41.4] 489 [254] .97 .97 .97 .97

650 [44.8] 497 [258] 1.00 .99 .97

700 [48.3] 506 [263] 1.00 .99 .97

750 [51.7] 513 [267] 1.00 1.00 .98

800 [55.2] 520 [271] 1.00 .99

850 [58.6] 527 [275] 1.00 .99

900 [62.1] 533 [278] 1.00 1.00

950 [65.5] 540 [282] 1.00

1000 [69.0] 546 [286] 1.00

1050 [72.4] 552 [289] 1.00

1100 [75.9] 558 [292]

1150 [79.3] 563 [295]

1200 [82.7] 569 [298]

Sizing

Page 32: Anderson Greenwood Series 200, 400, 500, 700, 900

Anderson Greenwood POPRV CatalogSeries 200, 400, 400 Iso-Dome, 500, 700, and 800

© 1996/rev. 1998, Anderson Greenwood reserves the right to change product designs and specifications without notice. 29

Sizing

Steam Super Heat Correction Factor, KsSet Saturated Total Steam Temperature °F [°C]

Pressure Steam 580 600 620 640 660 680 700 720 740 760 780 800 900 1000 1100 psig [barg] Temp.°F [°C] [305] [316] [326] [338] [349] [360] [371] [382] [393] [405] [416] [427] [482] [537] [593]

15 [1.03] 250 [121] .89 .88 .87 .86 .86 .85 .84 .83 .83 .82 .81 .81 .78 .75 .72

20 [1.38] 259 [126] .89 .88 .87 .86 .86 .85 .84 .83 .83 .82 .81 .81 .78 .75 .72

40 [2.40] 287 [142] .89 .88 .87 .87 .86 .85 .84 .84 .83 .82 .82 .81 .78 .75 .72

60 [4.14] 308 [153] .89 .88 .87 .87 .86 .85 .84 .84 .83 .82 .82 .81 .78 .75 .72

80 [5.52] 324 [162] .89 .89 .88 .87 .86 .85 .84 .84 .83 .82 .82 .81 .78 .75 .72

100 [6.90] 338 [170] .90 .89 .88 .87 .86 .85 .85 .84 .83 .82 .82 .81 .78 .75 .72

120 [8.27] 350 [177] .90 .89 .88 .87 .86 .85 .85 .84 .83 .82 .82 .81 .78 .75 .72

140 [9.65] 361 [183] .90 .89 .88 .87 .86 .85 .85 .84 .83 .82 .82 .81 .78 .75 .72

160 [11.0] 371 [188] .90 .89 .88 .87 .86 .86 .85 .84 .83 .82 .82 .81 .78 .75 .72

180 [12.4] 380 [193] .90 .89 .88 .87 .86 .86 .85 .84 .83 .82 .82 .81 .78 .75 .72

200 [13.8] 388 [198] .90 .89 .88 .87 .86 .86 .85 .84 .83 .83 .82 .81 .78 .75 .72

220 [15.2] 395 [201] .91 .90 .89 .88 .87 .86 .85 .84 .8 .83 .82 .81 .78 .75 .72

240 [16.6] 403 [206] .91 .90 .89 .88 .87 .86 .85 .84 .84 .83 .82 .81 .78 .75 .72

260 [17.9] 409 [209] .91 .90 .89 .88 .87 .86 .85 .85 .84 .83 .82 .81 .78 .75 .72

280 [19.3] 416 [213] .91 .90 .91 .88 .87 .86 .85 .85 .84 .83 .82 .82 .78 .75 .72

300 [20.7] 422 [217] .91 .90 .89 .88 .87 .86 .86 .85 .84 .83 .82 .82 .78 .75 .72

350 [24.1] 436 [224] .92 .91 .90 .89 .88 .87 .86 .85 .84 .83 .83 .82 .78 .76 .72

400 [27.6] 448 [231] .92 .91 .90 .89 .88 .87 .86 .85 .84 .84 .83 .82 .79 .76 .72

450 [31.0] 460 [238] .93 .92 .91 .89 .88 .87 .86 .86 .85 .84 .83 .82 .79 .76 .72

500 [34.5] 470 [243] .93 .92 .91 .90 .89 .88 .87 .86 .85 .84 .83 .82 .79 .76 .73

550 [37.9] 480 [249] .94 .92 .91 .90 .89 .88 .87 .86 .85 .84 .83 .82 .79 .76 .73

600 [41.4] 489 [254] .94 .93 .92 .90 .89 .88 .87 .86 .85 .84 .84 .83 .79 .76 .73

650 [44.8] 497 [258] .95 .94 .92 .91 .90 .89 .87 .86 .86 .85 .84 .83 .79 .76 .73

700 [48.3] 506 [263] .96 .94 .93 .91 .90 .89 .88 .87 .86 .85 .84 .83 .79 .76 .73

750 [51.7] 513 [267] .96 .95 .93 .92 .90 .89 .88 .87 .86 .85 .84 .83 .79 .76 .73

800 [55.2] 520 [271] .97 .95 .94 .92 .91 .90 .88 .87 .86 .85 .84 .84 .80 .76 .73

850 [58.6] 527 [275] .98 .96 .94 .93 .92 .90 .89 .88 .87 .86 .85 .84 .80 .76 .73

900 [62.1] 533 [278] .99 .97 .95 .93 .92 .90 .89 .88 .87 .86 .85 .84 .80 .77 .73

950 [65.5] 540 [282] .99 .97 .95 .94 .92 .91 .89 .88 .87 .86 .85 .84 .80 .77 .73

1000 [69.0] 546 [286] .99 .98 .96 .94 .93 .91 .90 .89 .87 .86 .85 .84 .80 .77 .73

1050 [72.4] 552 [289] 1.00 .99 .97 .95 .93 .92 .90 .89 .88 .87 .86 .85 .80 .77 .73

1100 [75.9] 558 [292] 1.00 .99 .98 .95 .94 .92 .91 .89 .88 .87 .86 .85 .81 .77 .73

1150 [79.3] 563 [295] 1.00 .99 .98 .96 .94 .92 .91 .90 .88 .87 .86 .85 .81 .77 .73

1200 [82.7] 569 [298] 1.00 .99 .98 .97 .95 .93 .91 .90 .89 .87 .86 .85 .81 .77 .73

Page 33: Anderson Greenwood Series 200, 400, 500, 700, 900

Anderson Greenwood POPRV CatalogSeries 200, 400, 400 Iso-Dome, 500, 700, and 800

© 1996/rev. 1998, Anderson Greenwood reserves the right to change product designs and specifications without notice. 30

Sizing

Effective API Orifice Area, in2 [cm2]

Valve Size Types 253, 453, 853 Types 243, 443, 843 Types 2631, 4631, 8631 Type 727in [mm] Type 259 Type 249 Type 2691

Type 546 Type 5661

1 x 2 0.110 (‘D’) [0.710][25 x 50]

0.307 (‘F’) [1.981] — —11/2 x 2 0.196 (‘E’) [1.265][40 x 50]

11/2 x 2[40 x 50]

0.503 (‘G’) [3.245]2 0.785 (‘H’) [5.065]2 1.320 [8.516] —

11/2 x 30.503 (‘G’) [3.245] 0.785 (‘H’) [5.065] — —

[40 x 80]

0.503 (‘G’) [3.245]2 x 3 0.503 (‘G’) [3.245]

1.287 (‘J’) [8.303] 2.554 [16.47] 0.785 (‘H’) [5.065][50 x 80] 0.785 (‘H’) [5.065]

1.287 (‘J’) [8.303]

3 x 4 1.287 (‘J’) [8.303]1.287 (‘J’) [8.30]

[80 x 100] 1.838 (‘K’) [11.86]2.853 (‘L’) [18.41] 5.938 [38.31] 1.838 (‘K’) [11.86]

2.853 (‘L’) [18.41]

2.853 (‘L’) [18.41]4 x 6

2.853 (‘L’) [18.41]3.600 (‘M’) [23.23]

[100 x 150] 3.600 (‘M’) [23.23] 6.380 (‘P’) [41.16] 9.489 [61.21]

4.340 (‘N’) [28.00]4.340 (‘N’) [28.00]

6.380 (‘P’) [41.16]

6 x 811.05 (‘Q’) [71.29]

[150 x 200]11.05 (‘Q’) [71.29] 16.00 (‘R’) [103.2] — 16.00 (‘R’) [103.23]

18.58 (‘RR’) [119.8]3

6 x Dual 8[150 x Dual 200]

— —- 20.57 [137.7] —

8 x Dual 8[150 x Dual 200]

— — 28.36 [182.9] —

8 x 10[200 x 250]

— 26.00 (‘T’) [167.7] 38.96 [251.3] 26.00 (‘T’) [167.74]

8 x Dual 10— — 38.96 [251.3] —

[200 x Dual 250]

Effective Nozzle Coefficient ofDischarge for 90% of Actual Capacity

Service K

Gas 0.975

Liquid 0.650

Steam 0.975

Notes

1. There are no recognized API ‘full-bore’ ori-fice areas. These effective areas arespecific to Anderson Greenwood.

2. Threaded body only.3. Series 700 is available in a non-standard

RR orifice 18.580 in2 [119.871 cm2].

Page 34: Anderson Greenwood Series 200, 400, 500, 700, 900

Anderson Greenwood POPRV CatalogSeries 200, 400, 400 Iso-Dome, 500, 700, and 800

© 1996/rev. 1998, Anderson Greenwood reserves the right to change product designs and specifications without notice. 31

Once you have determined the basic type(e.g., Series 200, 400, etc.) of valve re-quired in Part 1 and determined yourrequired orifice area in Part 2, please referto the following information to specify andorder the pressure relief valve best suitedfor your application.

Note: To ensure proper delivery and expedite processing, please include themodel number and any additional informa-tion requested below in all specifications,purchase requisitions, and orders, as applicable.

Constructing A Model NumberTo construct the model number, identifythe seven components on the ValveModel Numbering chart on page 45. Use the resulting assembled numberwhen ordering your valve.

Specifying Other Information for Your OrderThe following information might be re-quired, depending on the type of valveand other requirements:

Special RequirementsPlease specify the details of any specialprocedures you require during valve man-ufacturing.

These might include unlisted accessories,special quality assurance, material trace-ability, non-standard plating and surfacefinishes, non-destructive test require-ments, etc. Include required levels ofinspection and the parties or organizationswho will perform the inspections, if any.Note: Special requirements can impactprice and delivery.

Valve TaggingIf paper tags are requested at the time thevalve is ordered, they will be furnished atno additional cost. Other types of taggingare offered at additional cost. If you wouldlike metallic tags, please identify the spe-cific tag material, and tag numbers whenyou place your order.

DocumentationData submittals are not furnished for or-dered products unless specified. Certainstandard drawings, test reports, and certi-fications are available at no cost, uponrequest.

Packing for ShipmentAll products are packed for normal do-mestic shipment from point of assembly orstocking. Special packaging requirements,such as export boxing, should be speci-fied in your purchase order.

Ordering InformationTo properly process your order and avoiddelay, please specify the following:

• Quantity

• Inlet Size and Flange Rating andFacing (see page 44)

• Outlet Size and Flange Rating andFacing (see page 56)

• Anderson Greenwood Type ModelNumber (see page 45)

• Orifice Size (see page 30)

• Material Requirements (see pages 32 - 43)

– Main Valve Body– Main Valve Trim– Pilot

• Soft Goods (see page 44)

• Set Pressure

• Allowable Overpressure

• Service (Gas, Vapor, Liquid, Steam)

• Temperature (Operating and Relief)

• Operating Pressure

• Back Pressure (ConstantSuperimposed, Variable Superimposedand Built-up)

• Required Relief Capacity

• Molecular Weight (Gas) or SpecificGravity (Liquid)

• Ratio of Specific Heats (Gas)

• Optional Accessories (see pages 46 -50)– Field Test Connection– Field Test Indicator– Manifold Dual Pilot– Backflow Preventer– Pilot Supply Filter– Pressure Spike Snubber– Remote Pressure Sense Connection– Pilot Discharge Tubed to Main Valve

Outlet– Remote Valve Lift Indicator– Manual Unloader– Pilot Lift Lever– Remote Unloader– NACE Option

How to Order a Valve

Page 35: Anderson Greenwood Series 200, 400, 500, 700, 900

Anderson Greenwood POPRV CatalogSeries 200, 400, 400 Iso-Dome, 500, 700, and 800

© 1996/rev. 1998, Anderson Greenwood reserves the right to change product designs and specifications without notice. 32

Series 200/400/500/800 - Standard Main Valve

Materials of Construction

Item Description /S1 /S1/NACE /S /S/NACE-20°F to +800°F1 -20°F to +800°F1 -450°F to +1500°F1 -450°F to +1500°F1

[-29°C to +427°C1] [-29°C to +427°C1] [-268°C to +816°C1] [-268°C to +816°C1]

1 BodyA216-WCC or A216-WCC or

A351-CF8M SS A351-CF8M SSA216-WCB CS A216-WCB CS

2 Cap SA516-70 SA516-70 SA240-316 A240-316

3 Cap Bolting A449/A325 CS A449/A352 CS A193-B8M SS A193-B8M SS

A479-316 or A479-316 or A479-316 or A479-316 or4 Nozzle

A351-CF8M SS A351-CF8M SS A351-CF8M SS A351-CF8M SS

5 PistonA564-630 (17-4 PH) or A564-630 (17-4 PH) or A564-630 (17-4 PH) or A564-630 (17-4 PH) orA351-CF8M SS A351-CF8M SS A351-CF8M SS A351-CF8M SS

A479-316 or A479-316 or A479-316 or A479-316 or6 Liner

A351-CF8M A351-CF8M A351-CF8M SS A351-CF8M SS

7 Dipper Tube 17-4 PH SS 17-4 PH SS 17-4 PH SS 17-4 PH SS

8 Dome Spring 316 SS Not Used 316 SS Not Used

9 Tube Fittings A576 CS2 SA182-316 SS SA182-316 SS SA182-316 SS

10 Seat see page 44 see page 44 see page 44 see page 44

11 Piston Seal see page 44 see page 44 see page 44 see page 44

Nozzle A747-CB7CU-1 A747-CB7CU-1 A747-CB7CU-1 A747-CB7CU-112

Retaining Ring (17-4 PH) SS (17-4 PH) SS (17-4 PH) SS (17-4 PH) SS

13 Seat Retainer A479-316 SS A479-316 SS A479-316 SS A479-316 SS

14 Seat Retainer Screw 316 SS 17-4 PH SS 316 SS 17-4 PH SS

11

5

29

3

8

6

10

4

9

7

1

1412

13

Notes

1. Maximum temperature relates to fire caseconditions. Continuous service temperatureis limited by the choice of seat and seal materials.

2. SS for Series 500.

Page 36: Anderson Greenwood Series 200, 400, 500, 700, 900

Anderson Greenwood POPRV CatalogSeries 200, 400, 400 Iso-Dome, 500, 700, and 800

© 1996/rev. 1998, Anderson Greenwood reserves the right to change product designs and specifications without notice. 33

921 14 15

3

105

1 8 137

6

18

2

1211

Inlet

Outlet

4

16

17

20

19

22

Materials of Construction

Item Description /S /S1 /S2 /S3Ambient to 1000°F Ambient to 600°F 601°F to 800°F 801°F to 1000°F[Ambient to 538°C] [Ambient to 316°C] [318°C to 427°C] [427°C to 538°C]

1 Body SA351-CF8M SS SA216-WCB CS SA216-WCB CS SA217-WC6 AS

2 Cap SA240-316 SA516-70 SA516-70 SA387-11

3 Nozzle A351-CF8M SS A351-CF8M SS A351-CF8M SS A351-CF8M SS

4 Piston Assembly A217CA-151 A217CA-151 A217CA-151 A217CA-151

5 Liner A479-410 A479-410 A479-410 A479-410

6 Stud A193-B7 A193-B7 A193-B7 A193-B7

7 Nut A194-2H A194-2H A194-2H A194-2H

8 Piston Damper A479-410 A479-410 A479-410 A479-410

9 Retainer Screw A574 A574 A574 A574

10 Dome Spring Inconel® Inconel® Inconel® Inconel®

11Damper Ring with

Ductile Iron Ductile Iron Ductile Iron Ductile IronCentralizer Spring

Piston Seal Ring with12

Centralizer Spring Ductile Iron Ductile Iron Ductile Iron Ductile Iron

13 Liner Seal GRAFOIL® GRAFOIL® GRAFOIL® GRAFOIL®

14 Seal Extrusion Ring 1018 1018 1018 1018

15 Nozzle Seal Thermabraid SS Thermabraid SS Thermabraid SS Thermabraid SS

16 Drain Spring 316 SS 316 SS 316 SS 316 SS

17 Drain Plunger 17-4 SS 17-4 SS 17-4 SS 17-4 SS

18 Pipe Plug, Hex HD 316 SS 316 SS 316 SS 316 SS

19 Filter Assembly 316 SS 316 SS 316 SS 316 SS

20 Pitot Tube Seal GRAFOIL® GRAFOIL® GRAFOIL® GRAFOIL®

21 Belleville Washer 17-7 SS 17-7 SS 17-7 SS 17-7 SS

22 Disc 718 Nickle Alloy 17-4 SS or 718 Nickle Alloy 718 Nickle Alloy 718 Nickle Alloy

Notes

1. Inconel® is a registered trademark ofInternational Nickel Company.

2. GRAFOIL® is a registered trademark ofUCAR Carbon.

Series 700 - Standard Main Valve

Page 37: Anderson Greenwood Series 200, 400, 500, 700, 900

Anderson Greenwood POPRV CatalogSeries 200, 400, 400 Iso-Dome, 500, 700, and 800

© 1996/rev. 1998, Anderson Greenwood reserves the right to change product designs and specifications without notice. 34

Series 200 Pilot

11

7

8

19

5

1

32

20

16

26Supply

27

25

15

22

24

9

21

23

28

18

14

13

12

10

9

6

4

17

29

Dome

Page 38: Anderson Greenwood Series 200, 400, 500, 700, 900

Anderson Greenwood POPRV CatalogSeries 200, 400, 400 Iso-Dome, 500, 700, and 800

© 1996/rev. 1998, Anderson Greenwood reserves the right to change product designs and specifications without notice. 35

Series 200 Pilot

Materials of Construction

Item Description /S1, /S, /S1/NACE, /S/NACE

1 Body A479-316 SS

2 Nozzle Seal PCTFE

3 Nozzle A479 316 SS

4 Seat See Soft Goods (page 46)

5 Seat Retainer A479 316 SS

6 Spindle A479 316 SS/CR PL

7 Guide A479 316 SS

8 Bonnet Seal See Soft Goods (page 46)

9 Spring Washer A479 316 SS

10 Spring 316 SS1

11 Bonnet A479 316 SS

12 Jam Nut 316 SS

13 Adjustable Screw A276 316 SS

14 Cap A479 316 SS2

15 Blowdown Adjustment Screw A479 316 SS

16 Blowdown Adjustment Seal See Soft Goods (page 46)

17 Seat Retainer A276 316 SS

18 Piston Seal See Soft Goods (page 46)

19 Spacer A276 316 SS

20 Reseat Seat A479 316 SS

21 Bushing Seal See Soft Goods (page 46)

22 Reseat Adjustment Bushing A479 316 SS

23 Spacer Washer 316 SS

24 Blowdown Seal Teflon® TFE

25 Jam Nut 316 SS

26 Inlet Screen 316 SS

27 Reseat Piston A276 316 SS

28 Pipe Plug A479 316 SS

29 Vent Zytel®3/316 SS

Notes

1. For NACE trim, item 10 is Inconel®.

2. A582 303 SS above 1480 psig [102.1 barg].

3. Zytel® is a registered trademark of the E.I.duPont de Nemours Company.

Page 39: Anderson Greenwood Series 200, 400, 500, 700, 900

Anderson Greenwood POPRV CatalogSeries 200, 400, 400 Iso-Dome, 500, 700, and 800

© 1996/rev. 1998, Anderson Greenwood reserves the right to change product designs and specifications without notice. 36

Series 400 Pilot (Gas Service)

28

5

19

311

16

17

18

15

610

13 38

20 and21

24

3

8

Dome

34

33

32

37

30229

11

27

7

41

14

4 and42

13

12

39

40

3522

25

12

40

22

25

35

3610

399

24

26

3

26

399

12 3

44

43

301 - 740 psig[20.8 - 51.0 barg]

741 - 1480 psig[51.1 - 102 barg]

15 - 300 psig[1.03 - 20.6 barg]

Page 40: Anderson Greenwood Series 200, 400, 500, 700, 900

Anderson Greenwood POPRV CatalogSeries 200, 400, 400 Iso-Dome, 500, 700, and 800

© 1996/rev. 1998, Anderson Greenwood reserves the right to change product designs and specifications without notice. 37

1 Body A479-316 SS A479-316 SS

2 Body Plug A479-316 SS A479-316 SS

3 Feedback Piston A479-316 SS A479-316 SS

See Soft Goods See Soft Goods 4 Sense Diaphragm

(page 44) (page 44)

5 Inlet Nozzle A479-316 SS A479-316 SS

6 Spring 17-7 SS1 17-7 SS

7 Inlet SeatSee Soft Goods (page 44)

Viton®

8 Spool Spring 302 SS Elgiloy

9 Piston Nut 316 SS 316 SS

10 Sense Washer A479-316 SS 316 SS

11 Bias Spring 316 SS Elgiloy

See Soft Goods12 Piston Seal

(page 44)Viton®

13 Spring Washer A479-316 SS A479-316 SS

14 Diaphragm Case A479-316 SS A479-316 SS

15 Spring Bonnet A351-CF8M SS A351-CF8M SS

16 Adjustment Screw A276-316 SS A276-316 SS

17 Jam Nut A479-316 SS A479-316 SS

18 Cap A582-303 SS A582-303 SS

19 Bonnet Vent Zytel® Zytel®

20 Case Bolt A193-B8M SS2 A193-B8M SS2

21 Body Bolt A193-B8M SS2 A193-B8M SS2

See Soft Goods 22 Case/Liner Seal

(page 44)Viton®

24 Piston Sleeve A479-316 SS A479-316 SS

See Soft Goods 25 Sleeve/Case Seal

(page 44)Viton®

Notes

1.316 SS for set pressure range 15 – 65 psig [1.03 – 4.48 barg].

2.302 SS for set pressure range 501–1480 psig [34.5 – 102.1 barg].

3.Viton® is a registered trademark of the E.I. duPont de NemoursCompany.

See Soft Goods 26 Piston Seal

(page 44)Viton®

See Soft Goods27 Inlet Nozzle Seal

(page 44)Viton®

A564-630 A564-630 28 Outlet Nozzle

(17-4PH) SS (17-4PH) SS

Upper Outlet See Soft Goods 29

Nozzle Seal (page 44)Viton®

See Soft Goods 30 Body Plug Seal

(page 44) Viton®

See Soft Goods 31 Spool Seal

(page 44)Viton®

Lower Outlet See Soft Goods 32

Nozzle Seal (page 44)Viton®

See Soft Goods33 Outlet Seat

(page 44)Viton®

34 Spool A479-316 SS A479-316 SS

Diaphragm35

Retainer WasherA479-316 SS A479-316 SS

Diaphragm 36

Support PlateA479-316 SS A479-316 SS

37 Body Vent Zytel® Zytel®

38 Sense Plate A479-316 SS A479-316 SS

39 Lock Washer A479-316 SS A479-316 SS

See Soft Goods 40 Diaphragm Seal

(page 44)Viton®

See Soft Goods 41 Body/Case Seal

(page 44)Viton®

42 Diaphragm Shield Teflon®-FEP Teflon®-FEP

43 Sense Piston A479-316 SS A479-316 SS

44 Piston Sense SealSee Soft Goods (page 44)

Viton®

Series 400 Pilot

Materials of Construction

Item Description /S1, /S /S1/NACE, /S/NACE Item Description /S1, /S /S1/NACE, /S/NACE

Page 41: Anderson Greenwood Series 200, 400, 500, 700, 900

Anderson Greenwood POPRV CatalogSeries 200, 400, 400 Iso-Dome, 500, 700, and 800

© 1996/rev. 1998, Anderson Greenwood reserves the right to change product designs and specifications without notice. 38

Series 500 Pilot

12

24

13

17

18

31

25

14

35and 32

16

6

9

26

4

28

2115

3

20

8

29and33

23

10

11

19

34

7

22

5

2

1

27

30

35and 32

15-275 psig[1.03 - 19.0 barg]

7

8

9

275 - 740 psig[19.0 - 51.0 barg]

Page 42: Anderson Greenwood Series 200, 400, 500, 700, 900

Anderson Greenwood POPRV CatalogSeries 200, 400, 400 Iso-Dome, 500, 700, and 800

© 1996/rev. 1998, Anderson Greenwood reserves the right to change product designs and specifications without notice. 39

Series 500 Pilot

Materials of Construction

Item Description /S1, /S, /S1/NACE , /S/NACE

1 Body A351 GR. CR8M

2 Nozzle A479-316 SS

3 Spindle A276-316 SS

4 Socket/Seat A479-316 SS

5 Diaphragm Support Plate A479-316 SS

6 Spacer Ring A479-316 SS

7 Sense Plate A479-316 SS

8 Boost Plate A479-316 SS

9 Diaphragm Shield A240-304 SS

10 Bonnet A351-CF8M SS

11 Spring Washer A479-316 SS

12 Pressure Adjustment Screw A276-316 SS

13 Bonnet Insert SA564-670 (17-4) SS

14 Bonnet Seal BUNA-N

15 Spindle Seal Teflon®-TFE1

16 Plate Boost Seal Teflon®-TFE

17 Spring 316 SS2

18 Bonnet Vent Aluminum

19 Lock Washer3 316 SS

20 Shim Washer 316 SS

21 Retainer Screw Teflon®-TFE

22 Bolt 17-4 SS PH

23 Cap A582-303 SS

24 Jam Nut A479-316 SS

25 Jam Nut A479-316 SS

26 Seal Retainer A479-316 SS

27 Seat PEEK

28 Ball 316 SS4

29 Diaphragm5 Teflon®-FEP Type L

30 Nameplate A240-304 SS

31 Drive Screw 304 SS

32 Gasket3 Teflon®-TFE

33 Diaphragm6 Hastelloy®

34 Spindle Gasket Teflon®-FEP

35 Gasket7 PEEK

Notes

1. Carbon filled Teflon®-TFE seal Hastelloy®

spring loaded.

2. 316 SS used 60 psig [4.14 barg] and below, Inconel® X750 used 121 – 180 psig [8.34 –12.4 barg] and 351 – 450 psig [24.2 – 31.0barg].

3. Used 180 psig [12.4 barg] and below.

4. Hastelloy® C for NACE.

5. Upper and lower diaphragm, 15 – 30 psig[1.03 – 2.07 barg], lower diaphragm only, 31 – 120 psig [2.14 – 8.27 barg].

6. Upper diaphragm only 31 – 120 psig [2.14 –8.27 barg], upper and lower diaphragm, 121– 720 psig [8.34 – 49.6 barg].

7. Used above 180 psig [12.4 barg].

8. Hastelloy® is a registered trademark ofHaynes International.

Page 43: Anderson Greenwood Series 200, 400, 500, 700, 900

Anderson Greenwood POPRV CatalogSeries 200, 400, 400 Iso-Dome, 500, 700, and 800

© 1996/rev. 1998, Anderson Greenwood reserves the right to change product designs and specifications without notice. 40

35

27

34

33

Optional Features

Threaded Cap

Threaded Cap and Gag

Lift Lever and Gag

25

2

26

32

29

27

30

28

27

23

10

1215

22

17

19

18

41

40

To Supply 21

42

20

16

39

1

24

Dome

13

11

9

37

36

38

14

8

31

4

7

5

4

6

3

Series 700 Pilot

Page 44: Anderson Greenwood Series 200, 400, 500, 700, 900

Anderson Greenwood POPRV CatalogSeries 200, 400, 400 Iso-Dome, 500, 700, and 800

© 1996/rev. 1998, Anderson Greenwood reserves the right to change product designs and specifications without notice. 41

Note

1. ALYMP35N® is a registered trademark ofSPS Technologies, Inc.

Series 700 Pilot

Materials of Construction

Item Description /S1, /S2, /S3, /S

1 Body SS A479-316

2 Lift Lever Bonnet SS A479-316

3 Cap SS A479-316

4 Spring Washer SS A479-316

5 Adjusting Screw SS A479-316

6 Hex Jam Nut SS 316

7 Spring Inconel® X750

8 Spindle SS 17-4

9 Disc SS 17-4

10 Nozzle SS 17-4

11 Nozzle Seal GRAFOIL®/SST

12 Reseat Seat SS 17-4

13 Spacer SS 17-4

14 Cage Guide SS A479-316

15 Reseat Piston SS 17-4

16 Blowdown Adjustment Bushing SS A479-316

17 Thread Seal GRAFOIL®

18 Blowdown Adjustment Nut SS A479-316

19 Blowdown Adjustment Packing GRAFOIL®

20 Safety Lock Screw SS 18-8

21 Blowdown Adjustment Screw SS A479-316

22 1/2 NPT Pipe Plug SS A479-316

23 Vent Aluminum

24 Shim SS 316

25 Lever SS 316

26 Torsion Spring SS 316

27 O-ring Teflon®

28 Lock Washer SS 18-8

29 Roll Pin SS 420

30 1/4-28 x 1/4 Bolt SS 18-8

31 Cam SS 316

32 Gland Nut SS A479-316

33 Gag Rod SS 300 or 4130 Alloy Steel

34 Gag Rod Lever SS 18-8

35 Bolt SS A193-B8M

36 Ball SS 440C

37 Disc Spring Washer ALYMP35N®

38 Bonnet Spring Washer SS 17-4

39 Adjustment Screw Retainer SS 17-4

40 Stop Pin SS 18-8

41 Packing Retainer SS 316

42 Blowdown Adjustment Sleeve SS 17-4

Page 45: Anderson Greenwood Series 200, 400, 500, 700, 900

Anderson Greenwood POPRV CatalogSeries 200, 400, 400 Iso-Dome, 500, 700, and 800

© 1996/rev. 1998, Anderson Greenwood reserves the right to change product designs and specifications without notice. 42

18

20

21

14

24

10

29

27

28

1

4

15

17

16

5

19

19

9

25

8

25

3

7

2

12

13

11

23

22 6

26

Series 800 Pilot

Page 46: Anderson Greenwood Series 200, 400, 500, 700, 900

Anderson Greenwood POPRV CatalogSeries 200, 400, 400 Iso-Dome, 500, 700, and 800

© 1996/rev. 1998, Anderson Greenwood reserves the right to change product designs and specifications without notice. 43

Series 800 Pilot

Materials of Construction

Item Description /S1, /S /S1/NACE, /S/NACE

1 Body A564-630 H1150 17-4 SS A564-630 H1150 17-4 SS

2 Inlet Bushing A564-630 H1150 17-4 SS A564-630 H1150 17-4 SS

3 Outlet Nozzle A564-630 H1150 17-4 SS A564-630 H1150 17-4 SS

4 Inlet Nozzle A564-630 H1150 17-4 SS A564-630 H1150 17-4 SS

5 Bonnet A351-CF8M SS A351-CF8M SS

6 Bonnet Lock Bolt 316 SS 316 SS

7 Inner Spool A564-630 H1150 17-4 SS A564-630 H1150 17-4 SS

8 Outer Spool A564-630 H1150 17-4 SS A564-630 H1150 17-4 SS

9 Spool Nut A564-630 H1150 17-4 SS A564-630 H1150 17-4 SS

10 Feedback Piston A564-630 H1150 17-4 SS A564-630 H1150 17-4 SS

11 Sense Piston A564-630 H1150 17-4 SS A564-630 H1150 17-4 SS

12 Feedback Spacer A269-316 SS A269-316 SS

13 Lock Washer 316 SS 316 SS

14 Hex Nut A194-8M SS A194-8M SS

15 Spool Spring 17-7 SS Inconel® X-750

16 Lock Nut A479-316 SS A479-316 SS

17 Screen Assembly 316 SS 316 SS

18 Cap A582-303 SS A582-303 SS

19 Spring Washer A479-316 SS A479-316 SS

20 Pressure Set Screw A564-630 H1150 17-4 SS A564-630 H1150 17-4 SS

21 Set Spring 316 SS 316 SS

22 Piston Seal Backup Ring See Soft Goods (page 44) Viton®

23 Sense Seal See Soft Goods (page 44) Viton®

24 Feedback Seal See Soft Goods (page 44) Viton®

25 Seat See Soft Goods (page 44) Viton®

26 Outer Nozzle Seal See Soft Goods (page 44) Viton®

27 Spool Seal See Soft Goods (page 44) Viton®

28 Inlet Bushing Seal See Soft Goods (page 44) Viton®

29 Inlet Nozzle Seal See Soft Goods (page 44) Viton®

Page 47: Anderson Greenwood Series 200, 400, 500, 700, 900

Anderson Greenwood POPRV CatalogSeries 200, 400, 400 Iso-Dome, 500, 700, and 800

© 1996/rev. 1998, Anderson Greenwood reserves the right to change product designs and specifications without notice. 44

Inlet Flange Ratings

1. Seals only; for seats:1-inch [25 mm] and 11⁄2-inch [40 mm] valves,600 psig [41.4 barg] maximum2-inch [50 mm] – 4-inch [100 mm] valves,400 psig [27.6 barg] maximum6-inch [150 mm] – 8-inch [200 mm] valves,275 psig [19.0 barg] maximum.

2. Broad pressure limits pertain only to thematerial. Actual limits for specific valvesizes, valve types, and operating conditionsvary. Consult factory.

3. Series 500 excepted (+515°F [268°C] maximum, 15 psig [1.03 barg] minimum,720 psig [49.6 barg] maximum).

4. Viton® maximum temperatures ratings (accumulated):3000 hours at 450°F [232°C]1000 hours at 500°F [260°C]240 hours at 550°F [288°C]48 hours at 600°F [316°C].

5. For other soft goods, please contact factory.

6. Series 500 only.

Notes

Maximum Pressure Rating, psig [barg]

Flange Material Temperature, °F [°C]Class -423 to -21 -20 to 100 200 300 400 500 600 700 800

[-253 to -30] [-29 to 38] [93] [149] [205] [260] [316] [371] [427]

CS — 285 [19.7] 260 [17.9] 230 [15.9] 200 [13.8] 170 [11.7] 140 [9.66] 110 [7.59] 80 [5.52]150#

SS 275 [19.0] 275 [19.0] 240 [16.6] 215 [14.8] 195 [13.5] 170 [11.7] 140 [9.66] 110 [7.59] 80 [5.52]

CS — 740 [51.0] 675 [46.6] 655 [45.2] 635 [43.8] 600 [41.4] 550 [37.9] 535 [36.9] 410 [28.3]300#

SS 720 [49.6] 720 [49.7] 620 [42.8] 560 [38.6] 515 [35.5] 480 [33.1] 450 [31.0] 430 [29.7] 415 [28.6]

CS — 1480 [102.1] 1350 [93.1] 1315 [90.7] 1270 [87.6] 1200 [82.8] 1095 [75.5] 1065 [73.4] 825 [56.9]600#

SS 1440 [99.3] 1440 [99.3] 1240 [85.5] 1120 [77.2] 1030 [71.0] 955 [65.9] 905 [62.4] 865 [59.7] 830 [57.2]

CS — 2220 [153.1] 2025 [139.6] 1970 [135.8] 1900 [131.0] 1795 [123.8] 1640 [113.1] 1600 [110.3] 1235 [85.2]900#

SS 2160 [149.0] 2160 [149.0] 1860 [128.3] 1680 [115.8] 1540 [106.2] 1435 [99.0] 1355 [93.5] 1275 [87.9] 1245 [85.9]

CS — 3705 [255.5] 3375 [232.7] 3280 [226.2] 3170 [218.6] 2995 [206.6] — — —1500#

SS 3600 [248.2] 3600 [248.2] 3095 [213.4] 2795 [192.7] 2570 [177.2] 2390 [164.8] — — —

CS — 6170 [425.4] 5625 [387.8] 5470 [377.2] 5280 [364.1] 4990 [344.1] — — —2500#

SS 6000 [413.7] 6000 [413.8] 5160 [355.8] 4660 [321.3] 4280 [295.1] 3980 [274.5] — — —

Recommended Soft Goods Limits5

Material Continuous Process Minimum MaximumTemperature, °F [°C] Pressure, psig [barg] Pressure, psig [barg]

Minimum Maximum Pilot Main Pilot Main

BUNA-N -65 [-54] +275 [135] 15 [1.03] 15 [1.03] 6170 [425.5] 61701 [425.5]

Viton® -20 [-29] +4004 [205] 15 [1.03] 15 [1.03] 6170 [425.5] 61701 [425.5]

Ethylene Propylene -65 [-54] +325 [163] 15 [1.03] 15 [1.03] 3600 [248.2] 61701 [425.5]

Urethane -65 [-54] +300 [149] –– 2762 [19.0] — 6170 [425.5]

Teflon®2 -423[-253] +4003 [205] 15 [1.03]6 503 [3.45] — 6003 [41.4]

Teflon®/SS2 -423[-253] +500 [260] — 276 [19.0] — 1480 [102.1]

Vespel2 -423[-253] +500 [260] — 1481 [102.1] — 6000 [413.7]

PEEK -423[-253] +515 [268] 156 [10.8]6 1481 [102.1] 7406 [51.0] 6000 [413.7]

1. CS: A216, Grade WCB.

2. SS: A351, Grade CF8M.

3. Ratings at temperatures at and above -20°F [-29°C] per ANSI B16.34.

Notes

Page 48: Anderson Greenwood Series 200, 400, 500, 700, 900

Anderson Greenwood POPRV CatalogSeries 200, 400, 400 Iso-Dome, 500, 700, and 800

© 1996/rev. 1998, Anderson Greenwood reserves the right to change product designs and specifications without notice. 45

Model Numbering

4 4 3 10 J 23 /S1

Pilot Series

2 – Series 2004 – Series 4005 – Series 5007 – Series 7008 – Series 800

Main Valve Lift1

4 – Full Lift, API Orifice5 – Restricted, API Orifice6 – Full Lift, Full Bore Orifice

Main Valve Piston Type

3 – Soft Seat/Seals6 – Teflon® Soft Seat/Seals (Types 546, 566 only)7 – Metal Seat/Seals (727 only)9 – Cryogenic Trim Soft Seat/Seals (Types 249, 259, 269 only)

Inlet Flange Rating, ANSI

05 – 150#10 – 300#12 – 600#14 – 900#16 – 1500#18 – 2500#N – FNPT

Orifice Designation

Letter – API Equivalent— – Full Bore (Largest practical orifice area for a given valve inlet size)

Inlet x Outlet, Inches

Main Valve Materials

/S – SS Body and Trim/S1 – CS Body, SS Trim/S2 – CS Body, High-temperature Trim (Series 700 only)/S3 – WC6 Alloy Steel Body, High-temperature Trim (Series 700 only)

/S1/NACE – CS Body and SS Trim Compliance With NACE MR0175S/NACE – SS Body and Trim Compliance With NACE MR0175

/SPL – Special

Note

1. For a full lift valve, the area controlling thevalve capacity is the main valve nozzle bore.For a restricted lift valve, the area controllingthe valve capacity is the ‘curtain area’ be-tween the main valve nozzle and thebottom of the lifted piston.

Page 49: Anderson Greenwood Series 200, 400, 500, 700, 900

Anderson Greenwood POPRV CatalogSeries 200, 400, 400 Iso-Dome, 500, 700, and 800

© 1996/rev. 1998, Anderson Greenwood reserves the right to change product designs and specifications without notice. 46

In addition to the beneficial features avail-able through the use of pilot operatedsafety valves, a variety of accessories andoptions are available to provide additionalfunctions. Some simplify the process ofperiodic testing, an important safety re-quirement today. Others assist in thesuccessful operation of the safety valveunder adverse or special applications.

Please refer to the options and acces-sories availability table on page 52. Onrequest, other options may be availablefor some models for special situations,such as position indicators, purge connec-tions, multiple pilots, differential pressuresensing, etc.

A. Field Test Connection:• In-service verification of set pressure.

• Simplifies the periodic testing of safetyvalves.

Anderson Greenwood pilot operatedsafety valves may be readily tested forverification of set pressure during normalsystem operation with this option. FieldTest Connection is an option on mostmodels. The customer furnishes a pres-sure source, plus a test gauge andmetering valve for the portable field test-ing system. When test pressure is slowlyadmitted through a metering valve, thepilot and the main valve dome are pres-surized, simulating an increased systempressure.

When set pressure is reached (pop actionpilots only), the pilot will actuate. This ac-tuation pressure may then be comparedwith the nameplate value. Dependingupon the current system pressure, and the characteristics of the specific pilot, the main valve may also briefly open andclose, or partially open and close, provid-ing verification that the main valve pistonis free to move.

When the Field Test Connection is usedwith the modulating type pilots, the pilotwill begin cracking at a pressure justbelow the nameplate setting. In order toaccurately establish the set pressure, an-other accessory, the Field Test Indicator,is recommended.

B. Field Test Indicator:• Simplifies verification of modulating

pilot set pressures.

• Only one test connection and pressuregauge required.

This is a mechanical indicator, availableonly for modulating pilots, allowing for the accurate verification of set pressure.Since the set pressure of all modulatingsafety valves in this catalogue are definedas the point when the dome pressure isreduced to 70 percent of set pressurewhen system pressure reaches the name-plate setting, the indicator is implemented.This gives positive verification that setpressure has been reached. The verifica-tion process for modulating pilots requiresthis option, in addition to the Field TestConnection.

C. Manifold Dual Pilot:• In-Service Replacement of Pilot.

• Extended Outage Cycle. The MDP isavailable both as an option and as aretrofit kit. The dual cartridge pilots aremanifolded in a miniature safety selec-tor valve which allows for in-servicereplacement of the pilot without shut-ting the system down while maintainingfull system overpressure protection.Also, field test connection and manualblowdown are built into the manifold.

Accessories and Options

A

C

B

Page 50: Anderson Greenwood Series 200, 400, 500, 700, 900

Anderson Greenwood POPRV CatalogSeries 200, 400, 400 Iso-Dome, 500, 700, and 800

© 1996/rev. 1998, Anderson Greenwood reserves the right to change product designs and specifications without notice. 47

D. Backflow Preventer:• Prevents accidental reverse flow

through safety valve.

This option, sometimes called a ‘vacuumblock,’ prevents a pilot operated safetyvalve from reverse flow, when sufficientvacuum is present at the inlet flange. Thebackflow preventer also prevents reverseflow when the pressure at the outlet flange(superimposed back pressure) is greaterthan the current system pressure. Reverseflow will occur with any standard type ordesign of pilot operated safety valve, whensufficient reverse differential pressure exists. Reverse flow, should it be inducedby a reverse differential pressure, will beprevented by this option.

All backflow preventers operate by permit-ting the introduction of outlet pressure intothe dome of the main valve, thereby hold-ing the piston firmly onto the nozzle,overcoming the effect of a reverse differ-ential pressure across the safety valve.The option also includes a built-in provi-sion to prevent reverse flow through thepilot that would otherwise pass throughthe pilot supply line, back into the system.

A Backflow Preventer should be specifiedwhenever:

• A vacuum may be present at the inletconnection due to unusual operatingconditions or a temporary vacuum con-dition that may occur under startupconditions.

• The discharge of the safety valve isconnected to a downstream pressurevessel, where pressure may vary fromtime to time, in excess of the pressurein the upstream system.

• The discharge of multiple safety valvesis combined into a single manifold orvent system, creating superimposedback pressures in excess of the currentupstream system pressure.

E. Pilot Supply Filter:• Protects pilot from excessive particu-

late matter in flow stream.

This is a mechanical filter that is availablefor gas and liquid applications where thereis a possibility of large amounts of particu-late matter in the fluid stream. The filter is optional for liquid or gas service for anypilot model. The pilot supply filter will berigidly mounted to the main valve cap.

F. Pressure Spike Snubber:• Overcomes pressure ‘spikes’ in gas

systems, that would cause prematureactuation.

This option may be provided on the Series200 or 400 non-flowing type pilots, only on gas applications. The snubber is rec-ommended for use on pulsating gascompressor applications, where instanta-neous pressure values (pressure spikes)approach or exceed the set pressure andmay cause inadvertent valve actuation.The device acts as a pulsation dampener;consisting of a series of fixed orifices,combined with small volume chambersthat dampen the transient pressure rises.The average static system pressure is unaffected, so no change in set pressureis experienced with this option. The pres-sure spike snubber is compact and ismounted to the main valve cap. Pleasenote that it is to be applied only for gas applications.

For vapor applications, the Series 700non-flowing pilot is supplied with pressurespike snubber as standard.

Accessories and Options

D

E

F

Page 51: Anderson Greenwood Series 200, 400, 500, 700, 900

Anderson Greenwood POPRV CatalogSeries 200, 400, 400 Iso-Dome, 500, 700, and 800

© 1996/rev. 1998, Anderson Greenwood reserves the right to change product designs and specifications without notice. 48

G. Remote Pressure SenseConnection:

• Safety valve will respond to actual system pressure conditions.

• Eliminates undesirable cycling due to excessive inlet pressure losses.

• Improves safety, under adverse operating conditions.

This optional feature permits the pilot tosense system pressure at a location thatmost accurately reflects the actual operat-ing pressure of the protected system. A remote pressure sense connection eliminates the false system pressure indication that will occur during relievingconditions, due to pressure losses in theinlet piping to the safety valve. Most ap-plicable codes recommend that the inletpiping system be designed for a maximumanticipated pressure loss of 3 percent. Ifthis is not possible, the remote pressuresense connection should be specified.

Please note that the addition of a remotepilot sense line allows the pilot to correctlysense system pressure and to keep thevalve from rapid cycling or chattering.With remote sensing the piston type, pilotoperated safety valves described in thiscatalogue will remain stable against theeffects of high inlet pressure loss phe-nomena. However, relieving capacity willbe proportionately reduced wheneverthere is inlet pressure loss to the safetyvalve.

Please note that valves furnished for remote pilot sense, may be converted to integral sense, or vice versa, since the pressure pickup is installed in all instances, and the integral sense connec-tion is closed off with a removable 1/2-inchNPT threaded pipe plug.

H. Pilot Discharge Tubed to MainValve Outlet:

• Eliminates any local venting of fluidmedia from pilot.

This option is desirable when the safetyvalve is within a closed environment andeven the small amount of gas dischargedfrom the pilot is to be avoided. When liq-uid service is specified, the appropriatepilot should be chosen and the factorystandard will be to add this option.

I. Remote Valve Lift Indicator:• Provides remote signal to allow the

plant operator to know when a safetyvalve has operated.

This feature consists of a differential pres-sure switch, actuated when the mainvalve has been operated. The switch isadjusted to sense the difference betweenthe system pressure and the main valvedome pressure. Electrical indication isthen available to a remote location.Furnish full particulars on electrical poweravailable, the switch contact style and rat-ing, the type of enclosure and hazardrating. The switch will be mechanicallymounted to the main valve cap. Externalwiring enclosures are not normally fur-nished.

Accessories and Options

G

H

I

Page 52: Anderson Greenwood Series 200, 400, 500, 700, 900

Anderson Greenwood POPRV CatalogSeries 200, 400, 400 Iso-Dome, 500, 700, and 800

© 1996/rev. 1998, Anderson Greenwood reserves the right to change product designs and specifications without notice. 49

J. Manual Unloader:• Permits the safety valve to be opened

to depressurize the system.

• Acts as manual override to normalpressure setting, but has no effect onthe sealed pressure setting.

A manual unloader consists of a smallhand valve connected to the dome line ofthe main valve. Opening of the hand valvevents the dome pressure faster than it canbe recharged by the pilot supply. Sufficientdome pressure reduction results in pistonlift, due to unbalanced forces, simulatingpilot actuation. This option is used to allowthe safety valve to be used, along withother valves, for the emergency reductionof system pressure due to potential safetyhazards. When permitted, the manual un-loader may be substituted for a mechanicallift lever.

K. Pilot Lift Lever:• Permits manual test of safety valve

operation.

This feature is provided for those applica-tions where the mechanical lifting of thepilot is required for verification of valve operation. Lifting of the pilot spindle willpermit the main valve to lift when the sys-tem pressure is at least 75 percent ormore of set pressure. The pilot lift lever ispacked to prevent external leakage. Somesafety regulations and codes require thata lift lever be furnished for air, hot waterover 140°F [284°C] and steam applica-tions.

Remote Unloader:• Permits the safety valve to be remotely

opened to depressurize the system.

This is the same scheme as the manualunloader, except that the unloader valve isremotely operated. Either solenoid orpneumatic operation may be used. Pleasefurnish full particulars of the type of un-loader electro valve to be furnished, andthe desired valve action: normally open orclosed. For solenoid operation, specify thevoltage and current (AC or DC). Furnishthe frequency in Hertz for alternating cur-rent. The type of enclosure, such asexplosion proof, splash proof, corrosionresistant, etc., must also be specified forelectrical operators. Unless otherwisespecified, no separate wiring enclosure isfurnished.

If the remote unloader is supplied, it willbe mechanically mounted to the safetyvalve with the pressure connection to thedome line of the main valve. Venting willbe to the atmosphere through a weatherfitting.

NACE Option:• Essential option for sour gas service.

This is a material option to meet the stresscorrosion problems associated with sourgas service. The materials in both the pilotand main valve will meet the requirementsof NACE MR-01-75.

Accessories and Options

J

K

Page 53: Anderson Greenwood Series 200, 400, 500, 700, 900

Anderson Greenwood POPRV CatalogSeries 200, 400, 400 Iso-Dome, 500, 700, and 800

© 1996/rev. 1998, Anderson Greenwood reserves the right to change product designs and specifications without notice. 50

Accessories and Options

Pilot Valve Test Drum:• Simplifies field and maintenance shop

resetting and repair.

This is an option for the shop testing andresetting of the pilot, and is offered forcustomer maintenance and repair shops.It consists of a small accumulator, approx-imately 0.01 cubic meter (0.25 cubic feet)

volume, with the necessary fittings, valvesand test gauges for mounting and testingof the pilot. The test drums are made toorder for the pilot models specified.Please furnish the set pressure range and the pilot models to be tested. Thecustomer furnishes the pressure supply to the accumulator. Tools for adjustingand servicing the pilot are not included.

Supply (System)Pressure Gauge

High PressureNitrogen orAir Supply

MeteringValve

Vent Valve

Test Drum

Pilot Valve

Pilot SupplyLine

Pilot Valve test apparatus used toadjust set pressure and blowdown.

Options and Accessories Availability Table

Accessory/Option Pilot Series200 400 500 700 800

Field Test Connection O N/A O O N/A

Field Test Connection w/Indicator N/A O O1 N/A O

Backflow Preventer O O O N/A O

Remote Pressure Sense Connection O O O O O

Manual Unloader4 O O O O O

Remote Unloader2 O O O O O

Pilot Supply Filter O O O S O

Pilot Lift Lever O O O O O

Pressure Spike Snubber O O3 N/A S7 O3

NACE Trim O O O N/A O

Pilot Discharge Tubed to Main Outlet Valve N/A O5 S N/A S

Remote Valve Lift Indicator6 O O O O O

Manifolded Dual Pilots N/A N/A N/A O N/A

Notes

Option Codes: S - Standard

O - Optional: available upon request

N/A - Not available for this model valve.

Materials: Options and accessories will utilizematerials of construction consistentwith those of the main valve and pilotvalve. Consult the factory represen-tative for specific details.

1. This option is recommended wheneverField Test Connection is specified.

2. Furnish full particulars. See option descrip-tion on page 49.

3. Gas service only.

4. The effective Cv of the unloader shall be atleast 0.4 (Kv = 0.35), including any associ-ated tubing or piping.

5. When liquid service is specified, this optionis standard.

6. Furnish complete details on type of signaloutput desired and power supply available.

7. Standard for vapor service.

Page 54: Anderson Greenwood Series 200, 400, 500, 700, 900

Anderson Greenwood POPRV CatalogSeries 200, 400, 400 Iso-Dome, 500, 700, and 800

© 1996/rev. 1998, Anderson Greenwood reserves the right to change product designs and specifications without notice. 51

Notes

1. Higher rated outlet flanges available on special order.

2. Series 200 pilot only. Add 1-inch for Series400 and 800 pilots, and 7-inches for Series500 pilot.

Dimensions and Weights

B

A

C

Flanged - Types 243/249/253/259, 443/453, 546, 843/853

Size Available Inlet Flange Outlet Flange Dimensions Approximatein [mm] Equivalent RF or RJ RF1 A B C Approx.2 Weight

Flow Areas in [mm] in [mm] in [mm] lb [kg]

1 x 2 [25 x 50] D, E, F 1” – 150# 2” – 150# 4.12 [105] 4.50 [114] 17 [430] 26 [11.8]

1 x 2 [25 x 50] D, E, F 1” – 300# 2” – 150# 4.38 [111] 4.50 [114] 17 [430] 27 [12.3]

1 x 2 [25 x 50] D, E, F 1” – 600# 2” – 150# 4.38 [111] 4.50 [114] 17 [430] 28 [12.7]

1 x 2 [25 x 50] D, E, F 1” – 900# 2” – 300# 4.94 [126] 4.75 [121] 21 [534] 35 [15.9]

1 x 2 [25 x 50] D, E, F 1” – 1500# 2” – 300# 4.94 [126] 4.75 [121] 21 [534] 35 [15.9]

1 x 2 [25 x 50] D, E, F 1” – 2500# 2” – 300# 4.94 [126] 4.75 [121] 21 [534] 39 [17.7]

11⁄2 x 2 [40 x 50] D, E, F 11⁄2” – 150# 2” – 150# 4.87 [124] 4.75 [121] 18 [448] 29 [13.2]

11⁄2 x 2 [40 x 50] D, E, F 11⁄2” – 300# 2” – 150# 4.87 [124] 4.75 [121] 18 [448] 33 [15.0]

11⁄2 x 2 [40 x 50] D, E, F 11⁄2” – 600# 2” – 150# 4.87 [124] 4.75 [121] 18 [448] 33 [15.0]

11⁄2 x 2 [40 x 50] D, E, F 11⁄2” – 900# 2” – 300# 5.87 [149] 5.50 [140] 22 [557] 44 [20.0]

11⁄2 x 2 [40 x 50] D, E, F 11⁄2” – 1500# 2” – 300# 5.87 [149] 5.50 [140] 22 [557] 44 [20.0]

11⁄2 x 2 [40 x 50] D, E, F 11⁄2” – 2500# 2” – 300# 5.87 [149] 5.50 [140] 22 [557] 55 [25.0]

11⁄2 x 3 [40 x 80] G, H 11⁄2” – 150# 3” – 150# 5.12 [130] 4.87 [124] 19 [482] 38 [17.3]

11⁄2 x 3 [40 x 80] G, H 11⁄2” – 300# 3” – 150# 5.12 [130] 4.87 [124] 19 [482] 42 [19.1]

11⁄2 x 3 [40 x 80] G, H 11⁄2” – 600# 3” – 150# 5.12 [130] 4.87 [124] 19 [482] 42 [19.1]

11⁄2 x 3 [40 x 80] G, H 11⁄2” – 900# 3” – 300# 6.38 [162] 6.75 [172] 23 [584] 48 [21.8]

11⁄2 x 3 [40 x 80] G, H 11⁄2” – 1500# 3” – 300# 6.38 [162] 6.75 [172] 23 [584] 48 [21.8]

11⁄2 x 3 [40 x 80] G, H 11⁄2” – 2500# 3” – 300# 6.38 [162] 6.75 [172] 23 [584] 65 [29.5]

2 x 3 [50 x 80] G, H, J 2” – 150# 3” – 150# 5.37 [136] 4.87 [124] 19 [482] 50 [22.7]

2 x 3 [50 x 80] G, H, J 2” – 300# 3” – 150# 5.37 [136] 4.87 [124] 19 [482] 52 [23.6]

2 x 3 [50 x 80] G, H, J 2” – 600# 3” – 150# 5.37 [162] 4.87 [172] 19 [482] 53 [26.4]

2 x 3 [50 x 80] G, H, J 2” – 900# 3” – 300# 6.56 [167] 6.75 [172] 23 [591] 79 [35.9]

2 x 3 [50 x 80] G, H, J 2” – 1500# 3” – 300# 6.56 [167] 6.75 [172] 23 [591] 79 [35.9]

2 x 3 [50 x 80] G, H, J 2” – 2500# 3” – 300# 7.00 [178] 6.75 [172] 24 [601] 95 [43.2]

Page 55: Anderson Greenwood Series 200, 400, 500, 700, 900

Anderson Greenwood POPRV CatalogSeries 200, 400, 400 Iso-Dome, 500, 700, and 800

© 1996/rev. 1998, Anderson Greenwood reserves the right to change product designs and specifications without notice. 52

B

A

C

Dimensions and Weights

Flanged

B

A

C

Threaded

Flanged - Types 243/249/253/259, 443/453, 546, 843/853

Size Available Inlet Flange Outlet Flange Dimensions Approximatein [mm] Equivalent RF or RJ RF1 A B C Approx.2 Weight

Flow Areas in [mm] in [mm] in [mm] lb [kg]

3 x 4 [80 x 100] J, K, L 3” –150# 4” – 150# 6.13 [156] 6.38 [162] 20 [508] 86 [39.1]

3 x 4 [80 x 100] J, K, L 3” –300# 4” – 150# 6.13 [156] 6.38 [162] 20 [508] 90 [41.0]

3 x 4 [80 x 100] J, K, L 3” –600# 4” – 150# 6.38 [162] 6.38 [162] 20 [508] 92 [41.8]

3 x 4 [80 x 100] J, K, L 3” –900# 4” – 300# 7.50 [191] 7.12 [181] 25 [635] 121 [55.0]

3 x 4 [80 x 100] J, K, L 3” –1500# 4” – 300# 7.50 [190.5] 7.12 [181] 25 [635] 138 [62.7]

4 x 6 [100 x 150] L, M, N, P 4” –150# 6” – 150# 7.75 [197] 8.25 [210] 23 [584] 138 [62.7]

4 x 6 [100 x 150] L, M, N, P 4” –300# 6” – 150# 7.75 [197] 8.25 [210] 23 [584] 148 [69.3]

4 x 6 [100 x 150] L, M, N, P 4” –600# 6” – 150# 7.75 [197] 8.25 [210] 23 [584] 158 [71.8]

4 x 6 [100 x 150] L, M, N, P 4” –900# 6” – 300# 9.81 [249] 9.19 [233] 29 [736] 228 [103.6]

4 x 6 [100 x 150] L, M, N, P 4” –1500# 6” – 300# 9.81 [249] 9.19 [233] 29 [736] 248 [112.7]

6 x 8 [150 x 200] Q, R 6” –150# 8” – 150# 9.44 [240] 9.50 [241] 26 [660] 245 [111.4]

6 x 8 [150 x 200] Q, R 6” –300# 8” – 150# 9.44 [240] 9.50 [241] 26 [660] 264 [120.0]

6 x 8 [150 x 200] Q, R 6” –600# 8” – 150# 9.70 [246] 9.50 [241] 26 [660] 308 [140.0]

8 x 10 [200 x 250] T 8” –150# 10” – 150# 10.88 [276] 11.00 [279] 30 [762] 516 [234.5]

8 x 10 [200 x 250] T 8” –300# 10” – 150# 10.88 [276] 11.00 [279] 30 [762] 544 [247.3]

8 x 10 [200 x 250] T 8” –600# 10” – 150# 11.68 [297] 11.00 [279] 30 [762] 585 [265.9]

Threaded - Types 243/253, 443/453, 546, 843/853

Size Available Inlet Outlet Dimensions Approximatein [mm] Equivalent A B C Approx.2 Weight

in [mm] in [mm] in [mm] in [mm] in [mm] lb [kg]

1 x 2 [25 x 50] D, E, F 1” [25] 2” [50] 3.57 [91] 2.88 [73] 17 [431] 22 [10.0]

11⁄2 x 2 [40 x 50] D, E, F 11⁄2” [40] 2” [50] 3.57 [91] 2.88 [73] 17 [431] 22 [10.0]

11⁄2 x 2 [40 x 50] G, H 11⁄2” [40] 2” [50] 3.75 [95] 3.75 [95] 17 [431] 27 [12.3]

Notes

1. Higher rated outlet flanges available on special order.

2. Series 200 pilot only. Add 1-inch for Series400 and 800 pilots, and 7-inches for Series500 pilot.

Page 56: Anderson Greenwood Series 200, 400, 500, 700, 900

Anderson Greenwood POPRV CatalogSeries 200, 400, 400 Iso-Dome, 500, 700, and 800

© 1996/rev. 1998, Anderson Greenwood reserves the right to change product designs and specifications without notice. 53

Dimensions and Weights

B B

A

C

Notes

1. Higher rated outlet flanges available.Consult factory.

2. Also available 2 x 3 x 3-inch [50 x 80 x 80 mm].

3. Also available 3 x 4 x 4-inch [80 x 100 x 100 mm].

4. Also available 4 x 6 x 6-inch [100 x 150 x 150 mm].

5. Series 200 pilot only. Add 1-inch for Series400 and 800 pilots, and 7-inches for Series500 pilot.

Type 263/269, 463, 566, 863

Size Slip-On Outlet Dimensions Approximatein [mm] Inlet Flange Flange1 A B C Weight

RF RTJ RF Approx.5 Single Dualin [mm] in [mm] in [mm] in [mm] lb [kg] lb [kg]

11⁄2 x 2 [40 x 50] 150# RF or RTJ 150# RF 3.62 [92] 3.87 [98] 4.50 [114] 18 [457] 31 [14.1] —

11⁄2 x 2 [40 x 50] 300# RF or RTJ 150# RF 3.75 [95] 4.00 [102] 4.50 [114] 18 [457] 34 [15.5] —

11⁄2 x 2 [40 x 50] 600# RF or RTJ 300# RF 4.06 [103] 4.06 [103] 5.24 [133] 18 [457] 38 [17.3] —

11⁄2 x 2 [40 x 50] 900# RF or RTJ 300# RF 4.43 [113] 4.43 [113] 5.24 [133] 22 [558] 48 [21.8] —

11⁄2 x 2 [40 x 50] 1500# RF or RTJ 300# RF 4.43 [113] 4.43 [113] 5.24 [133] 22 [558] 48 [21.8] —

2 x 32 [50 x 802] 150# RF or RTJ 150# RF 4.56 [115] 4.81 [122] 5.31 [135] 19 [482] 55 [25.0] 75 [34.1]

2 x 32 [50 x 802] 300# RF or RTJ 150# RF 4.69 [119] 5.00 [127] 5.31 [135] 19 [482] 57 [26.0] 77 [35.0]

2 x 32 [50 x 802] 600# RF or RTJ 150# RF 5.06 [129] 5.12 [130] 5.31 [135] 19 [482] 58 [26.0] 78 [35.0]

2 x 3 x 3 [50 x 80] 900# RF or RTJ 300# RF 5.69 [145] 5.75 [146] 6.38 [162] 24 [619] — 108 [49.1]

2 x 3 x 3 [50 x 80] 1500# RF or RTJ 300# RF 5.69 [145] 5.75 [146] 6.38 [162] 24 [619] — 108 [49.1]

3 x 43 [80 x 1003] 150# RF or RTJ 150# RF 5.56 [141] 5.81 [148] 7.00 [178] 22 [558] 115 [52.3] 128 [58.2]

3 x 43 [80 x 1003] 300# RF or RTJ 150# RF 5.81 [148] 6.12 [155] 7.00 [178] 23 [584] 120 [54.5] 133 [60.5]

3 x 43 [80 x 1003] 600# RF or RTJ 150# RF 6.12 [155] 6.19 [157] 7.00 [178] 23 [584] 130 [59.1] 135 [61.4]

3 x 4 x 4 [80 x 100 x 100] 900# RF or RTJ 300# RF 6.37 [162] 6.44 [164] 7.50 [191] 27 [685] — 175 [79.5]

3 x 4 x 4 [80 x 100 x 100] 1500# RF or RTJ 300# RF 7.66 [195] 7.72 [196] 7.50 [191] 29 [736] — 190 [86.4]

4 x 64 [100 x 1504] 150# RF or RTJ 150# RF 6.90 [175] 7.06 [179] 7.38 [188] 23 [584] 140 [63.6] 155 [70.5]

4 x 64 [100 x 1504] 300# RF or RTJ 150# RF 7.43 [189] 7.74 [197] 7.38 [188] 23 [584] 150 [68.2] 165 [75.0]

4 x 64 [100 x 1504] 600# RF or RTJ 150# RF 7.93 [201] 7.99 [203] 7.38 [188] 24 [619] 160 [72.7] 175 [79.5]

4 x 6 x 6 [100 x 150 x 150] 900# RF or RTJ 150# RF 9.21 [234] 9.27 [236] 7.38 [188] 28 [711] — 190 [86.4]

6 x 8 x 8 [150 x 200 x 200] 150# RF or RTJ 150# RF 8.87 [225] 9.12 [232] 8.25 [210] 27 [685] — 245 [111]

6 x 8 x 8 [150 x 200 x 200] 300# RF or RTJ 150# RF 9.31 [237] 9.62 [244] 8.25 [210] 27 [685] — 265 [120]

6 x 8 x 8 [150 x 200 x 200] 600# RF or RTJ 150# RF 10.00 [254] 10.06 [256] 8.25 [210] 28 [711] — 310 [141]

8 x 8 x 8 [200 x 200 x 200] 150# RF or RTJ 150# RF 10.44 [265] 10.69 [272] 11.44 [291] 31 [762] — 520 [236]

8 x 8 x 8 [200 x 200 x 200] 300# RF or RTJ 150# RF 10.94 [278] 11.25 [286] 11.44 [291] 32 [787] — 545 [247]

8 x 8 x 8 [200 x 200 x 200] 600# RF or RTJ 150# RF 11.12 [282] 11.25 [286] 11.44 [291] 32 [787] — 585 [265]

8 x 10 or [200 x 250] or8 x 10 x 10 [200 x 250 x 250]

150# RF or RTJ 150# RF 10.25 [260] 10.50 [267] 11.06 [281] 33 [838] 594 [270] 625 [284]

8 x 10 or [200 x 250] or8 x 10 x 10 [200 x 250 x 250]

300# RF or RTJ 150# RF 10.93 [278] 11.25 [286] 11.06 [281] 33 [838] 617 [280] 650 [295]

8 x 10 x 10 [200 x 250 x 250] 600# or RF or RTJ 150# RF 11.75 [299] 11.81 [300] 11.06 [281] 33 [838] 655 [297] 690 [313]

Page 57: Anderson Greenwood Series 200, 400, 500, 700, 900

Anderson Greenwood POPRV CatalogSeries 200, 400, 400 Iso-Dome, 500, 700, and 800

© 1996/rev. 1998, Anderson Greenwood reserves the right to change product designs and specifications without notice. 54

Series 700 Dimensions and Weights

Class 150

Valve BasicDimensions

WeightSize Model

A B C (max.) Dlb [kg]

in [mm] in [mm] in [mm] in [mm]

2G3 72705G23 5.12 [130] 4.88 [124] 15.90 [404] 11.87 [301] 90 [40.9]

2H3 72705H23 5.12 [130] 4.88 [124] 15.90 [404] 11.87 [301] 90 [40.9]

2J3 72705J23 5.38 [137] 4.88 [124] 16.16 [420] 11.87 [301] 90 [40.9]

3J4 72705J34 6.12 [155] 6.38 [162] 16.88 [429] 13.64 [346] 135 [61.4]

3K4 72705K34 6.12 [155] 6.38 [162] 16.88 [429] 13.64 [346] 135 [61.4]

3L4 72705L34 6.12 [155] 6.50 [165] 16.88 [429] 13.64 [346] 135 [61.4]

4L6 72705L46 7.75 [197] 8.75 [222] 18.34 [466] 12.47 [317] 220 [100.0]

4M6 72705M46 7.75 [197] 8.75 [222] 18.34 [466] 12.47 [317] 220 [100.0]

4N6 72705N46 7.75 [197] 8.75 [222] 18.34 [466] 12.47 [317] 220 [100.0]

4P6 72705P46 7.75 [197] 8.75 [222] 18.34 [466] 12.47 [317] 220 [100.0]

6Q8 72705Q68 9.44 [240] 9.50 [241] 19.56 [497] 13.78 [350] 350 [159.1]

6R8 72705R68 9.44 [240] 9.50 [241] 19.56 [497] 13.78 [350] 350 [159.1]

6RR8 72705RR68 9.44 [240] 9.50 [241] 19.56 [497] 13.78 [350] 350 [159.1]

8T10 72705T810 10.88 [276] 11.00 [279] 22.50 [572] 16.34 [415] 750 [340.9]

Class 300

Valve BasicDimensions

WeightSize Model

A B C (max.) Dlb [kg]

in [mm] in [mm] in [mm] in [mm]

2G3 72710G23 5.12 [130] 4.88 [124] 15.90 [404] 11.87 [301] 92 [41.8]

2H3 72710H23 5.12 [130] 4.88 [124] 15.90 [404] 11.87 [301] 92 [41.8]

2J3 72710J23 5.38 [137] 4.88 [124] 16.16 [420] 11.87 [301] 92 [41.8]

3J4 72710J34 6.12 [155] 6.38 [162] 16.88 [429] 13.64 [346] 139 [63.2]

3K4 72710K34 6.12 [155] 6.38 [162] 16.88 [429] 13.64 [346] 139 [63.2]

3L4 72710L34 6.12 [155] 6.50 [165] 16.88 [429] 13.64 [346] 139 [63.2]

4L6 72710L46 7.75 [197] 8.75 [222] 18.34 [466] 12.47 [317] 228 [103.6]

4M6 72710M46 7.75 [197] 8.75 [222] 18.34 [466] 12.47 [317] 228 [103.6]

4N6 72710N46 7.75 [197] 8.75 [222] 18.34 [466] 12.47 [317] 228 [103.6]

4P6 72710P46 7.75 [197] 8.75 [222] 18.34 [466] 12.47 [317] 228 [103.6]

6Q8 72710Q68 9.44 [240] 9.50 [241] 19.56 [497] 13.78 [350] 365 [165.9]

6R8 72710R68 9.44 [240] 9.50 [241] 19.56 [497] 13.78 [350] 365 [165.9]

6RR8 72710RR68 9.44 [240] 9.50 [241] 19.56 [497] 13.78 [350] 365 [165.9]

8T10 72710T810 10.88 [276] 11.00 [279] 22.50 [572] 16.34 [415] 770 [350.0]

1. All weight and dimensions are approximatedepending on the size and accessories.

2. When specifying MDP Manifold Dual Pilot in-crease the valve weight by 40 lb [18.2 kg].

Notes

Page 58: Anderson Greenwood Series 200, 400, 500, 700, 900

Anderson Greenwood POPRV CatalogSeries 200, 400, 400 Iso-Dome, 500, 700, and 800

© 1996/rev. 1998, Anderson Greenwood reserves the right to change product designs and specifications without notice. 55

Series 700 Dimensions and Weights

Class 600

Valve BasicDimensions

WeightSize Model

A B C (max.) Dlb [kg]

in [mm] in [mm] in [mm] in [mm]

2G3 72712G23 6.06 [154] 6.38 [162] 16.84 [428] 11.87 [302] 93 [42.3]

2H3 72712H23 6.06 [154] 6.38 [162] 16.84 [428] 11.87 [302] 93 [42.3]

2J3 72712J23 6.06 [154] 6.38 [162] 16.84 [428] 11.87 [302] 93 [42.3]

3J4 72712J34 7.25 [184] 7.12 [181] 18.01 [458] 13.64 [347] 141 [64.1]

3K4 72712K34 7.25 [184] 7.12 [181] 18.01 [458] 13.64 [347] 141 [64.1]

3L4 72712L34 7.25 [184] 7.12 [181] 18.01 [458] 13.64 [347] 141 [64.1]

4L6 72712L46 7.75 [197] 8.75 [222] 18.34 [466] 12.47 [317] 235 [106.8]

4M6 72712M46 7.75 [197] 8.75 [222] 18.34 [466] 12.47 [317] 235 [106.8]

4N6 72712N46 7.75 [197] 8.75 [222] 18.34 [466] 12.47 [317] 235 [106.8]

4P6 72712P46 7.75 [197] 8.75 [222] 17.59 [467] 12.47 [317] 235 [106.8]

6Q8 72712Q68 9.44 [240] 10.50 [267] 19.62 [498] 13.78 [350] 380 [172.7]

6R8 72712R68 9.44 [240] 10.50 [267] 19.62 [498] 13.78 [350] 380 [172.7]

6RR8 72712RR68 9.44 [240] 10.50 [267] 19.62 [498] 13.78 [350] 380 [172.7]

8T10 72712T810 11.50 [292] 12.00 [305] 23.12 [587] 16.84 [428] 800 [363.6]

Notes

1. All weights and dimensions are approximate depending on size and accessories.

2. When specifying MDP Manifold Dual Pilot in-crease the valve weight by 40 lb [18.1 kg].

D

C

A

B

A

B

C

Page 59: Anderson Greenwood Series 200, 400, 500, 700, 900

Anderson Greenwood POPRV CatalogSeries 200, 400, 400 Iso-Dome, 500, 700, and 800

© 1996/rev. 1998, Anderson Greenwood reserves the right to change product designs and specifications without notice. 56

Valve Outlet Flange Rating1 Maximum Set Pressurepsig [barg]

API Orifice 2J3 300# 5475 [377.5]

API Orifice 6R8 150# 1200 [82.7]

API Orifice 8T10 150# 1175 [81.0]

Full Bore 11⁄2FB2 300# 2500 [172.4]

Full Bore 2FB3 150# 1150 [79.3]

Full Bore 3FB4 150# 723 [49.9]

Full Bore 4FB6 150# 1225 [84.5]

Full Bore 8FB8 x 8 150# 1400 [96.5]

Full Bore 8FB10 150# 4502 [31.0]

Outlet Flange Ratings

When pressure relief valves are used with discharge tailpipes or are piped todischarge headers, the PRV outlet flangerating must be selected based on thepressure at the flange during a relief cycleor other worst-case condition.

The valves listed in this catalogue showinlet/outlet flange combinations suitable

for valves discharging direct to the atmos-phere through a tailpipe with an L⁄D ratio of 15, set at the maximum, 100°F [38°C],inlet flange pressure rating or the pressure limits shown below. A tailpipe with a longradius, 90 degree elbow and 12-inch ofstraight pipe has a L⁄D ratio of approxi-mately 15.

1. Higher rated outlet flanges are available forhigher set pressures.

2. This limit is for steam only. Otherwise, themaximum set pressure is the same as forthe inlet flange rating.

Note: Pressure limits are for CS bodied valves.SS valve ratings are 97% of those shown.

Notes

Page 60: Anderson Greenwood Series 200, 400, 500, 700, 900

Pilot Operated Pressure Relief Valve CatalogRevised July 1998Catalog: POPRV-US.96

© 1996/rev. 1998 Anderson Greenwood Printed in USA

Anderson GreenwoodP.O. Box 944Stafford, Texas 77497, USATel: (281) 274-4400 Fax: (281) 240-1800International Tel: +1 281 274-4400International Fax: +1 281 240-1800

Anderson GreenwoodCorrie Way, Bredbury Industrial Estate,Stockport, Cheshire SK6 2ST, UKTel: 0161 494 5363 Fax: 0161 494 5672 International Tel: +44 161 494 5363International Fax: +44 161 494 5672