Ashtead Technology - Instrument Rental Guide - Environmental Section

Instrument rental GuIdeEnvironmEntal monitoring • non-dEstructivE tEsting • rEmotE visual inspEction • cEms & spEcialty gas

VOL 12

United StateS

1057 East Henrietta Rd. Rochester, NY 14623 Phone 585 424 2140 Fax 585 424 2166 1016 West Eighth Ave., Suite C King of Prussia, PA 19406 Phone 484 690 1001 Fax 484 690 1002 1450 Elmhurst Rd. Elk Grove Village, IL 60007 Phone 847 718 1246 Fax 847 718 1423 Park 100, 7144 Zionsville Rd., Bldg. 106 Indianapolis, IN 46268 Phone 317 328 3441 Fax 317 388 1124 2627 Metro Blvd. St. Louis, MO 63043 Phone 314 344 1079 Fax 314 344 5074

Corporate HeadqUarterS 19407 Park Row, Suite 160 Houston, TX 77084 Toll Free 800 242 3910 Phone 281 398 9533Fax 281 942 0937 offSore/SUrvey Offshore/Survey 19407 Park Row, Suite 170 Houston, TX 77084 Toll Free 866 ASHTEAD Phone 281 398 9533 Fax 281 398 3052 CeMS and SpeCialty GaS 1473 Elmhurst Rd. Elk Grove Village, IL 60007 Toll Free 877 GAS RENT Phone 847 613 0002 Fax 847 758 2089

1395 S. Marietta Parkway Building 100, Suite 122 Marietta, GA 30067 Phone 770 427 8533 Fax 770 427 8558 14141 Airline Highway, Oak Alley Building #4, Suites P/Q Baton Rouge, LA 70817 Phone 225 610 1270 Fax 225 610 1271 3311 Preston Rd. Pasadena, TX 77505 Phone 281 991 1448 Fax 281 991 1449 10665 Richmond Ave., Suite 195 Houston, TX 77042 Phone 713 331 3924 Fax 713 331 3934

23575 Cabot Blvd., Suite 203 Hayward, CA 94545 Phone 510 732 6591 Fax 510 732 6595 18195 McDurmott E., Suites A/B Irvine, CA 92614 Phone 949 955 3930 Fax 949 955 3932 883 Airport Park Rd., Suite D Glen Burnie, MD 21061 Phone 410 766 2874 Fax 410 766 2919 Canada 3505 Laird Rd., Unit 18 Mississauga, Ontario L5L 5Y7 Phone 905 607 9639 Fax 905 607 8592 3528 78 Avenue NW Edmonton, Alberta T6B 2X9 Phone 800 242 3910

If you would like more information on the product lines or services Ashtead Technology offers in addition to what you see in this catalog, please contact any of our offices listed below or visit our website at www.ashtead-technology.com.

www.ashtead-technology.com

WHo We are With offices spanning the globe, we are one of the world’s leading providers of specialist inspection, test and monitoring instruments. Our clients are found in industries as diverse as telecommunications, construction, power, manufacturing, survey, geotechnical and oil and gas, so we’re use to meeting tight deadlines and providing unique solutions to your daily challenges.

As you will find in this Instrument Rental Guide, we specialize in Environmental Monitoring, Non-Destructive Testing (NDT), Remote Visual Inspection (RVI), Specialty Gas and Offshore (Subsea Construction, Hydrographic Survey and IRM). We dedicate all of our resources to staying ahead of the ever advancing technologies these fields require for testing, sampling, monitoring, detecting or analyzing. Following a Management Buy-Out with backing from Pheonix Equity Parteners in 2008, we are not a truly independent company focusing on investment both in terms of our product offering and also our outstanding technical personnel. We know what makes the difference in giving you truly first-class rental service.

800-242-3910

tHe advantaGe of rentinGRenting is the most cost-effective way to utilize a piece of equipment without incurring all of the expenses associated with ownership, allowing your financial resources to be dedicated to core activities. Projects, deadlines and your requirements change, so it’s important to have all of the required equipment at hand. More and more organizations are switching to renting because of the economical advantages and convenience.

aSHtead teCHnoloGy’S perpetUal rental proGraMOur Perpetual Rental Program takes the benefits of renting even further by completely eliminating the return process. What is even better, this plan comes at a fraction of our standard monthly rate and still gives you continued access to our 24/7 technical support. Our PRP allows you to have all of the benefits of ownership and all of the advantages of renting.

rent-to-oWn and SaleSAshtead Technology now offers the option of rent-to-own as well as new and used equipment sales. Call us now to speak with a customer service representative about your equipment needs or visit our website for an updated list of instruments for sale.

repair and Calibration ServiCeIn order for your equipment to function properly it requires routine calibration and maintenance. This process often requires it to be sent back to the manufacturer, which can be expensive and cause you to be without your equipment for extended periods of time. Time you may not have. Let Ashtead Technology perform this service for you! Our factory trained technicians can diagnose and repair your equipment at our ISO: 9001 certified facility.


800-242-3910

2 Ambient Air Monitoring

3 Cleanroom Performance Testing

5 Confined Space Entry

8 Global Positioning

9 Hazardous Waste Investigation

11 HVAC Instruments

14 Indoor Air Quality

21 Industrial Hygiene

27 Positive Material Identification (PMI)

28 Sound, Noise & Vibration Monitoring

31 Toxic Gas Monitoring

36 Underground Location

37 Water Monitoring Instruments

44 Specialty Instruments

VTable of conTenTs

environMental MonitorinG non-deStrUCtive teStinG

reMote viSUal inSpeCtion

CeMS

68 Videoprobes

69 Thermal Cameras

70 Pipe Inspection Cameras/Tractors

74 High Speed Video Cameras & RVI Accessories

75 Borescopes

48 Coating Inspection/Ultrasonic Thickness

50 Ultrasonic Flaw Detectors

54 Hardness Testers

55 ACFM

56 Eddy Current

58 Ground Penetrating Radar

59 Concrete Testing

60 Positive Material Identification (PMI)

62 Tank Inspection

63 Leak Detection

64 Specialty Instruments

78 Ambient Air Analyzers

81 EPA Source Analyzers NO/NO2/NOX

82 EPA Source Analyzers NO/CO/SO2

84 EPA Source Analyzers O2/CO2

85 Total Hydrocarbon Analyzers (FID)

87 Combustion Analyzers

89 Probes, Conditioning Equipment & Accessories

appendixi Metric Conversions

ii SapphIRe Library

v INNOV-X Library

vii Niton Library

x Niton XLt 898 Library

xi Glossary

xxi Category Index

xxiii Product Index

ENV1

We specialize in renting a wide variety of analyzers, detectors, monitors and samplers for Environmental Protection and Industrial Hygiene applications.

The instruments in this section are ideal for performing clean room inspections, surveying confined space conditions, detecting and identifying potentially hazardous working environments, water quality analysis and ventilation studies.

As an added convenience to our customers, Ashtead now offers consumable items for sale! Should your sampling protocol require anything extra, visit our website or contact your Ashtead Technology representative for pricing details and availability.

EnvironmEntal monitoring

800-242-3910

ENV 2

Tisch Samplers Tisch PM-10 Monitor, Models 6070 • and 6070VTisch PUF High Volume Sampler • Model 1000Tisch TSP Air Sampler Models 5170 • and 5170V

The Tisch air samplers are ideal for analyzing pesticide particles, vapors and other air contaminants. Each sampler can be powered with a generator, meets EPA specifications and includes a seven day timer. Calibration kits are available. The 1000 PUF (polyurethane foam) is an easy to access sampling module with two chambers: upper for particle collection and lower for vapor entrapment. * Filters are not included with these units.

PM-10: 6070 6070V PUF 1000 TSP: 5170 5170V

Flow Rate 36 to 44cfm 40 to 44cfm (fixed orifice) 8 to 12cfm 39 to 60cfm 42 to 44cfm (fixed orifice

AMbienT AiR MoniToRing

Tisch PM-10, PUF 1000 and TSP


ENV3

Hach Particle Counters Met One 237B•Met One 2100•Met One 2400•Met One 3313•

The Hach Particle counters offer data-logging, built-in printers, six channel sizes, NIST-traceable calibration and the ability to perform Fed-Std-209E calculations. Model 237B includes four modes for ultimate flexibility. Use the 2100 for a rapid survey of multiple cleanroom points at a high flow rate, to test to filters in place, verify compliance of critical areas in electronic semiconductor applications and monitor LAF a benches and production tools. Model 2400 performs ISO 14644-1 calculations on all sizes (Model 3313 is a battery powered version of the 2400).

237b 2100 2400/3313

Flow Rate Size Channels 0.1cfm 0.3, 0.5, 7.0, 1.0, 2.0, 5.0µm 1.0cfm 0.3, 0.5, 7.0, 1.0, 2.0, 5.0µm 1.0cmf 0.3, 0.5, 1.0, 3.0, 5.0, 10.0µm

CleAnRooM PeRFoRMAnCe TeSTing

Hach Met One 2400 and 3313

Hach Ultra Analytics Met One GT-521 Handheld Particle Counter

Hach Ultra Analytics Met One GT-521 Handheld Particle Counter

Two sizing channels•Extended data storage: 4,000 data records•Full feature laser particle counter•Also available, the AEROCET 531Handheld Particle•Handheld, battery operated, • and completely portable unit that provides both particle counts or mass PM measurements as stored data-logged values, real time networked data, or printed results

Display Particle Size Range Concentration Range Flow Rate Sample Time Hold Time Communication

16 character x 4 line lCD minimum Selectable: 0.3pm maximum Selectable: 5.0ppm in 0.1pm steps 0 - 3,000,000 particles per cubic foot 0.1cfm (2.83lpm) adjustable 6 to 999 seconds adjustable 1 to 999 seconds Selectable rS-232, rS-485 with selectable baud rate

800-242-3910

ENV 4

Clean Air Trakker 2000 DI Water Fogger

Produces a highly visible fog using only DI water •and ultrasonic energyDiagnose air disturbances•Delivers submicron-sized water particles at • a speed and fog density that are user-adjustableIdeal for v• isualizing air flow patterns, verifying toxic fume containment, identifying vortices and flow disturbances, verifying pressure differentials between clean zones, and tracing migration paths on walls and around furniture A non-contaminating fog generator is the •recommended instrument for meeting the specifications of International 300mm Initiative (I300I), Semi S2-98, Semi S6-93 and Semi E44-95

Material Continuous Use Capacity

316l electro-polished stainless steel 1.5 hours at max output 2.0 liters Di water

CleAnRooM PeRFoRMAnCe TeSTing

Clean Air Trakker 2000 DI Water Fogger

BioTest RCS Plus Handheld Microbial Air Sampler

BioTest RCS Plus Handheld Microbial Air Sampler

Push-button operation, integrated display•Use this unit to evaluate the microbiological quality •of ambient air, the functionality of air treatment equipment and systems, and the effectiveness of decontamination measuresOperation of the instrument is via a keypad with •integrated, in-handle display or remote control Can be operated in either a vertical or horizontal •positionSimple to operate: fit an agar media strip around •the rotor, turn on the sampler and send the strip to the laboratory for analysis

Collection Principle Range of Sample Air Flow Tolerance Memory Functions Power

airborne microorganisms impact onto agar media strip by centrifugal force 1 to 1,999 liters, optimal range volumes 10 to 1,000 liters 50 i/min ± 5% 7 pre-set volumes 3 positions in memory individually selectable rapid-charge niCd batteries, up to one hour operation


ENV5

Innova 2 and 4 Gas Monitor and Thermo GasTech Model GT208

2 and 4 Gas Monitors Thermo GasTech Models GT201 and GT402•Thermo GasTech CO• 2 and O2 Monitor Model GT208Innova 2 and 4 Gas Monitors•

The Thermo GasTech GT201 and GT402 measure hydrocarbons, oxygen, carbon monoxide and hydrogen sulfide levels. These units are intrinsically safe and meet federal regulations for pre-testing confined spaces and other remote areas. These units feature datalogging and are PC connectable. The Thermo GasTech GT208 measures two gases: carbon dioxide and oxygen. It is suitable for a wide range of CO2 monitoring applications including breweries, wineries, bioremediation and worker protection at industrial sites. The Innova 2 and 4 Gas Monitors are designed to detect hydrocarbons, oxygen, carbon monoxide and hydrogen sulfide in order to protect workers. Units can be configured to monitor gases in several combinations including LEL and PPM levels.

ConFineD SPACe enTRy

RKI Eagle 1 to 6 Gas Portable Monitor

RKI Eagle 1 to 6 Gas Portable Monitor

Monitor six gases simultaneously•Built-in Data-logging•Internal pump draws samples from remote areas •

Detection Principle Accuracy Safety Design Detectable gases

Catalytic combustion, electrochemical cell, galvanic cell and infrared maximum variance ± 5% of full scale intrinsically Safe, Class i, Division 1, groups a, B, C and D Hydrocarbons, oxygen, carbon monoxide, hydrogen sulfide, ammonia, arsine, carbon dioxide, chlorine, flourine, hydrogen flourine, hydrogen chloride, hydrogen cyanide, methane, nitrogen dioxide, nitric oxide, ozone, phosphine, silane, sulfur dioxide

800-242-3910

ENV 6

RAE Q-RAE 4 Gas Monitor and Multi-RAE Plus

RAE Systems Multi-Gas Monitors Q-RAE 4 Gas Monitor and Q-RAE Plus •Multi-RAE Plus with PID•

The RAE gas monitors provide protection for personnel in tight, confined spaces and are intrinsically safe. Please inquire about interchangeable toxic sensors as well as their ranges and specifications. The Multi-RAE Plus includes a VOC monitor which provides continuous display and alarms for airborne VOC levels, so that respiratory protection is worn only when necessary. Alarms can also be set for Short Term Exposure Levels (STEL), Time Weighted Average (TWA), peaks and minimums. An integral pump enables remote sampling. Also available is the RAE Multi-RAE IR model which features CO2 (0 to 50,000ppm) as one of the two toxic sensors.

All MoDelS oxygen Combustible gas Carbon monoxide Hydrogen Sulfide MUlTi-RAe PlUS voCs

Range Resolution 0 to 30% 0.1% 0 to 100% lEl 1% lEl 0 to 500ppm 1ppm 0 to 100ppm 1ppm 0 to 2000ppm 0.1ppm at 0 to 200ppm 1ppm at 200 to 2000ppm

Industrial Scientific ITX-6 Multi Gas Monitor

50ppm resolution for hydrocarbons (HC) up to the •LEL alarm set pointThe unit also includes STEL and TWA readings and •alarms as well as iButton® technology (allows the operator to input user data and site information)

Sensors operating Temp Range operating Humidity Range Sensors Measuring Ranges and Resolution Data-logging Capability

lEl, Co, H2S, Sos, no2, o2 (simultaneous) -20° to 50° C (-4° to 122° F), typical toxic/o2 0° to +40° C (32° to 104° F), for lEl sensor 15 - 95: rH, typical 0 - 99: rH, intermittent, non-condensing Combustible gases/methane: Catalytic Diffusion oxygen and toxic gases: Electrochemical Co: 999ppm 1ppm H2S: 499ppm 1ppm n02: 99.9ppm 0.1ppm S02: 99.9ppm 0.1ppm 02: 30% 0.1% Comb (% lEl) 100%lEl 1%lEl Comb (%vol) 100%lEl 0.1% vol Comb (ppm) 10,000ppm 50ppm 300 hours log time at 1 minute intervals User can configure datalogging intervals and data overwrite capability


Industrial Scientific ITX 6 Multi-Gas Monitor


ENV7

VRAE Hand Held 5 Gas Detector

RAE Systems VRAE Handheld 5 Gas Detector

Internal sample draw pump for quick response and •remote sampling48 built in correction factors for LEL sensors•4 toxic sensor version•Sensors include the RAE dual range 0-100%•Volume and 0-100% LEL, oxygen and three, smart •interchangeable toxic gas sensors Up to four smart, interchangeable toxic sensors •my be addedMonitors explosive gases in an oxygen free •environment at percent by volume levels

Detector Direct Readout Sampling Pump intrinsically Safe

Catalytic sensor for combustible gas, thermal conductivity sensor for % volume combustible gas, Electrochemical sensors for oxygen and toxic gases instantaneous up to 5 values, oxygen and combustible gas as % by volume or % of lEl, toxic gases as part per million, StEl, tWa for toxic gases, high and low values of gases, battery voltage and elapsed time internal pump, flow rate 400cc/min, automatic shut off at low flow condition Ul & cUl Class i, Division i group a, B, C D


Industrial Scientific M40 Multi-Gas Monitor

Industrial Scientific M40 Multi-Gas Monitor

Durable, user-friendly multiple gas monitor•Capable of monitoring four gas levels •simultaneouslyUtilizes Electrochemical sensors •Case is immune to radio frequency •interference (RFI)

Sensors Catalytic Diffusion Electrochemical Measuring Ranges Carbon monoxide oxygen Hydrogen Sulfide methane Alarms Data-logging

Hydrogen Sulfide and methane (Combustible gases) oxygen and Carbon monoxide (toxic gases) 0 - 999ppm in 1ppm increments 0 - 39% in 0.1% increments 0 - 500ppm in 1ppm increments 0 - 100% in 1% increments 90db audible alarm lED visual alarm vibrating alarm for alert conditions internal memory with capacity for 75 hours of exposure data

800-242-3910

ENV 8

Trimble Receivers ProXH•Pro XRS Differential GPS•

The ProXH receiver introduces a new era in GPS for GIS collection. A GPS receiver, antenna and all day battery in one, the ProXH delivers subfoot accuracy. The Pro XRS receiver offers a full range of accurate real-time correction sources and great performance in all GPS conditions. Together with your field computer and software, the Pro XRS receiver provides a two way data flow between the field and GIS, facilitating the data collection and data maintenance process.

globAl PoSiTioning

Trimble Pro XRh GPS

Trimble Geo XT and Magellan eXplorist 500 GPS

Handheld GPS Units Trimble Geo XT •Magellan eXplorist 500 GPS•

Our handheld GPS systems are ideal for electric and gas utilities, water and wastewater services, land reform projects, and other applications where on-the-spot positioning is crucial. Excavate cables and pipes without wasted effort or risk of damage to nearby assets. The Trimble Geo XT features subfoot accuracy with an internal antenna. This instrument is lightweight, handheld and includes 1GB of onboard storage. The Magellan eXplorist 500 is superior in accuracy and reliability. It features a built-in barometer, altimeter, compass and thermometer. The eXplorist includes 8MB of maps and 8MB of memory.

Call 800-242-3910 to request a rate schedule for any equipment seen in this catalog!Want to

know more?


ENV9

UltraRAE Benzene Monitor and MiniRAE 3000

RAE Systems Monitors MiniRAE 2000 Handheld VOC Monitor•MiniRAE 3000 Handheld VOC Monitor•UltraRAE Benzene Monitor Model PGM-7200•

The RAE handheld monitors are ideal for applications in industrial hygiene such as hazardous material response, headspace analysis, confined space entry and personnel/workplace monitoring. The MiniRAE 2000 is an intrinsically safe PID (photoionization detector) with correction factors for more than 100 chemicals. The MiniRAE 3000 PID is the most advanced handheld VOC (volatile organic compound) detector with a list of 350 compounds correction factors- more than any other PID. The UltraRAE is an intrinsically safe monitor used to provide highly specific measurements of benzene.

MiniRAe 2000 MiniRAe 3000 UltraRAe

Range 0 to 999ppm 100 to 10,000ppm 0 to 15,000ppm 0 to 200ppm

HAzARDoUS WASTe inVeSTigATion

Thermo Environmental TVA-1000B and 580B

Thermo Scientific Vapor Analysis

580B Organic Vapor Meter•TVA-1000B Vapor Analyzer•

These intrinsically safe vapor meters by Thermo Scientific provide fast and accurate readings of organic and inorganic vapors. Use these analyzers in applications such as detecting soil contaminants and industrial leaks or locating spills in underground storage tanks.

580b oRgAniC VAPoR MeTeR PiD TVA-1000b VAPoR AnAlyzeR PiD FiD

Range 0 to 200ppm, 200 to 2000ppm 0 to 2000ppm 0 to 50,000ppm

800-242-3910

ENV 10

Photovac MicroFID Can be used to measure non-methane total VOC •when equipped with a charcoal filterBuilt-in Datalogging •

Range Accuracy Detection limit Response limit Hydrogen Cylinder Discharge Time Approvals Analog output Serial output battery life

0.1 to 50,000ppm methane equivalent (two ranges) Within ± 0.5ppm or ± 10% actual methane concentration (0.1 to 2000ppm range) 0.5ppm methane less than 3 seconds to 90% full scale greater than 8 hours intrinsically safe Class i, Division 1, groups a, B, C, D 0 to 1v, full scale rS-232 port Up to 15 hours

HAzARDoUS WASTe inVeSTigATion

Photovac MicroFID

GasCheck 5000is

Ion Science Leak Detectors GasCheck 3000•GasCheck 5000is•

These leak detectors are ideal for search and location of non-flamable gases such as helium, CFC’s, argon, butane, hydrogen SF6 and refrigerants. The GasCheck 5000is is intrinsically safe. The following specifications are for both the GasCheck 3000 and 5000is.

Detector Sensitivity (cc/sec) Accuracy Datalogging

micro thermal conductivity detector (tCD) He 2x10(-5), CH4 1x10(-4), r12 1x10(-4), ar 2x10(-4) ±5% displayed reading ± one digit 36,000 data points with date and time stamp


ENV11

TSI VelociCheck® Models 8330 and 8340

TSI VelociCheck® Models 8330 and 8340

Small & lightweight Air Velocity Meter•NIST traceable calibration •

Air Velocity Range instrument operating Temp. Range Probe operating Temp. Range Probe Dimension battery life Approvals Time Constant Air Velocity Accuracy

Model 8330 Model 8342 25 to 200’/min 25 to 2000’/min 32° to 149°F 32° to 122°F 0° to 200°F 32° to 122°F 37” x .395” diameter 3.1” x .25” diameter 10hrs at 100’/min 20hrs at 100’/min Ul listed intrinsically safe for Class i, Divisions 1 and 2, groups C and D; Class ii, groups E, F and g; and Class iii when used with alkaline batteries Fast mode 3-second average, slow mode 12-second average 5.0% of reading or ±5 ft/min, whichever is greater

HVAC inSTRUMenTS

TSI VelociCalc® Plus Model 8386

TSI Multi-Parameter Ventilation Meters • 9555 VelociCalc®

VelociCalc® Plus Model 8386• These multi-parameter ventilation meters are ideal for applications in HVAC commissioning and troubleshooting, cleanroom certification, thermal comfort studies, IAQ investigations and process air flow testing.

VeloCiCAlC® 9555 VeloCiCAlC® PlUS 8386

Measurements air velocity, temperature, relative humidity, Co and Co2

temperature, static pressure, Pitot tube readings, humidity, volumetric flow rate, dew point, wet bulb temperature and heat flow

800-242-3910

ENV 12

TSI VelociCalc® Model 5725 Rotating Vane Anemometer

Reversible 4” (100mm) head to read supply and •exhaust flowsCalculates• volumetric flow rate when user inputs duct shape and size, or areaSampling function records multiple point •measurementsAutomatic averaging of air velocity•Simultaneously dis• plays velocity and temperatureSweep mode for one overall measurement•Applications include heating and cooling coil •analysis, diffuser and grille measurements, fume hood face velocity tests, indoor air quality tests, filter face velocity measurements

Velocity Range Accuracy Duct Size Range Volumetric Flow Rate Range

50 to 6,000’/min (0.25 to 30m/s) ±1.0% of reading ±4’/min (±0.02m/s) 0 to 173.6’2 (0 to 16 m2) actual range is a function of velocity and duct area

HVAC inSTRUMenTS

TSI VelociCalc® Model 5725 Rotating Vane Anemometer

TSI AccuBalance® Model 8371

TSI AccuBalance® Model 8371 Measures the air volume flowing through registers, •diffusers and grillsIdeal to balance an HVAC system or spot check •environments as part of indoor air quality studiesNIST traceable calibration•Input temperature and barometric pressure to •obtain an automatic conversion between actual and standard flows

Flow Range Accuracy Hood Sizes

30 to 2000cfm ± 5% of reading and ± 5cfm 24” x 24” 24” x 48” 12” x 48” 12” x 60” 36” x 36”


ENV13

Shortridge ADM-870 Electronic Micromanometer

Shortridge ADM-870 Electronic Micromanometer Designed specifically for applications with demanding air • distribution requirements such as hospitals, pharmaceutical, biological and medical research laboratories and semiconductor manufacturing cleanrooms16-point averaging VelGrid provides accurate velocity readings at HEPA filters, laminar •flow work stations, chemical exhaust hoods and coil banksCan be used in ducts as small as 2” in diameter •As accurate and sensitive • as the best laboratory micromanometerBattery powered, 2000 readings per charge •

Air Velocity Range Differential Pressure Temperature Absolute Pressure Memory

25 to 3000fpm with Pitot tube 25 to 8000fpm with Pitot tube, (accuracy ± 3% of reading) 25 to 5000fpm with airFoil probe 25 to 2500fpm with velgrid ± 2% of reading ± 0.001 in wc from 0.0500 to 50.00 in wc, (0.0001 to 60 in wc FS); 20psid safe pressure -67.0° to 250°F, resolution 0.1°F -67.0° to 32°F, (accuracy ±1°F) 32° to 158°F, (accuracy ±0.5°F) 158° to 250°F, (accuracy ±1°F) 10 to 40 in Hg, (accuracy ±2% of reading from 14 to 40 in Hg) 100 readings, sequence labeled, sum and average

HVAC inSTRUMenTS

800-242-3910

ENV 14

TSI Aerosol Monitors TSI DustTrak® Model 8520•TSI DustTrak® Model 8530•TSI SidePak®AM510 Personal Aerosol Monitor •

These laser photometers are ideal for applications in indoor air quality studies, industrial workplace monitoring, evaluation of filters and engineering controls, environmental and perimeter monitoring. The DustTrak® Model 8520 and Model 8530 are portable and battery operated. They assess aerosol concentrations of contaminants such as dust, smoke, fumes and mists by measuring particle concentrations to PM-10, PM-2.5 and PM1.0 or respirable size fractions. The SidePak®AM510 is a belt mounted, compact and quiet personal aerosol monitor. The AM510 is intrinsically safe, making it ideal for hazardous environments.

DUSTTRAk® MoDel 8520 DUSTTRAk® MoDel 8530 SiDePAk®AM510

Aerosol Concentration Range 0.0001 to 20mg/m3 0.001 to 150mg/m3 0.0001 to 20mg/m3

inDooR AiR QUAliTy

TSI DustTrak® Model 8530 and SidePak®AM510

Casella MicroDust Pro

Casella MicroDust Pro Instantly displays dust levels and trends of airborne •fumes and aerosolsReal-time graphical display•Ideal for applications in construction/demolition, •pharmaceutical manufacturing, bakeries and mills as well as general occupational health surveys

Range Sensitivity zero Stability logging intervals operating Time

- 2.5, 0 - 25, 0 - 250, 0 - 2,500mg/m3 0.001mg/m3 +/- 0.002mg/m3 adjustable from 1 to 600 seconds about 9hrs or 20hrs with alkaline cells


ENV15

IN USA Model AET-030 and Aeroqual 500

Ozone Monitors Aeroqual 500•IN USA Handheld Model AET-030 •

These highly ozone specific monitors are ideal for applications in IAQ surveys, building investigations and monitoring plant emissions. The Aeroqual 500 includes a choice of high or low level detachable ozone sensors. This instrument is capable of datalogging up to 8,000 points. The IN USA AET-030 uses a state-of-the-art thin film semiconductor sensor. The resistance of the heated semiconductor film varies significantly in the presence of ozone due to decomposition and gas absorption.

AeRoQUAl 500 range accuracy response time

0 - 2ppm (25ppm recommended maximum) <± 10% (0 - 5ppm) <± 15% (2 - 20ppm) <35 seconds

in USA MoDel AeT-030

range accuracy response time

0.01 to 10ppmv ± 0.03ppmv between 0 and 0.5ppmv, ± 30% between 0.5 and 10ppmv ~ 1 minute to 79% of value, ~ 3 minutes to 90% of value

inDooR AiR QUAliTy

N6 Microbial Sampler

Microbial Samplers N6 Single/Two Stage Microbial Sampler•Cherwell SAS 180 Microbial Sampler •

These microbial samplers are ideal for indoor air quality studies, cleanroom efficiency studies, pharmaceutical production, animal care laboratories, food processing areas or in any environment in which contamination must be controlled. The N6 Microbial Sampler meets ACGIH specifications for bioaerosol sampling and analysis. The instrument draws an air sample into a petri dish which can be forwarded to a laboratory where microorganisms can be identified. The SAS 180 Microbial Sampler samples particles as small as 1 micron. A wide range of sample volumes can be tested over 7 hours of battery life.

800-242-3910

ENV 16

TSI P-Trak Ultrafine Particle Counter Model 8525

Track a particulate problem to its source•Counts particles smaller than 0.1 micrometer•Will not overload, unlike conventional •particle countersData-logging capability •

Concentration Range Particle Size Range Sample Flow Rate battery life output

0.01 - 5x10° particles/cm³ 0.02 to greater than 1 micrometer 100cm³/min up to 6hrs operation at 70°F rS-232 port

inDooR AiR QUAliTy

TSI P-Trak Ultrafine Particle Counter Model 8525

Hach Ultra Analytics Met One 227B Particle Counter

Hach Ultra Analytics Met One 227B Particle Counter

Handheld and Battery Operated•0.3µm at 0.cfm•NIST-traceable calibration •

Size Channels Channel 1 Channel 2 Flow Rate Sample Time Hold Time location labels Data-logging output battery life

0.3µm Selctable from 0.5, 1.0,3.0,or 5.0µm 0.1cfm 1 second to 24 hours 1 second to 24 hours 100 appear on printout 200 records, rotating buffer rS-232 port Up to 8hrs


ENV17

TSI Q-Trak Model 7565 with Optional 964 VelocityProbe

TSI Q-Trak Model 7565 with Optional 964 Velocity Probe

Real-Time simultaneous display of CO• 2, temperature, relative humidity and COStores 38.9 days of data at one-minute intervals•Displays 5 measurements simultaneously•User-selectable logging intervals and •start/stop timesPerform single point tests for quick building surveys•

Co2 Sensor range accuracy Co Sensor range accuracy Temperature Sensor range accuracy Humidity Sensor range accuracy

non-Dispersive infrared (nDir) 0 to 5000ppm ± 3% of reading and ± 50ppm Electro-chemical 0 to 500ppm ± 3% of reading or 3ppm, whichever is greater thermometer 32° to 140°F ± 1.0°F thin-Film Capacitive 5 to 95% rH ± 3%

inDooR AiR QUAliTy

TSI Q-Trak Model 8551 and Q-Trak Plus Model 8554

TSI Q-Trak Model 8551 and Q-Trak Plus Model 8554

IAQ Portable Monitor with CO•Monitors Four IAQ Parameters (Carbon Dioxide, •Carbon Monoxide, Temperature and RH)Survey and Data-logging Modes•Model 8554 Q-Trak Plus has 33 days of data-logging •memory at one-minute intervals

Co2 Sensor range accuracy Co Sensor range accuracy Temperature Sensor range accuracy Humidity Sensor range accuracy

non-Dispersive infrared (nDir) 0 to 5000ppm ± 3% of reading and ± 50ppm Electro-chemical 0 to 500ppm ± 3% of reading or 3ppm, whichever is greater thermistor 32° to 122°F ± 1.0°F thin-Film Capacitive 5 to 95% rH ± 3%

800-242-3910

ENV 18

Delmhorst Model BD 2100 and Tramex Survey Encounter

Moisture Meters Delmhorst Model BD 2100•Tramex Survey Encounter Moisture Meter•Tramex Professional Pin-Type Moisture Meter•

The Delmhorst Model BD 2100 will help trace leaks, find exterior moisture intrusion and locate dry rot. Resistance technology and a clear digital readout make this instrument accurate and easy to use.The Tramex Survey Encounter Moisture Meter uses the principal of non-destructive electrical impedance to find moisture behind and underneath wood, plaster, brick, carpeting, vinyl flooring, ceramic tile and even behind drywall. This instrument contains a library of 32 wood species, three roofing types and more. The Tramex Professional Pin-Type Moisture Meter is designed to use on wood and wood products. This meter works on the principle of DC resistance to take a clear and accurate reading.

DelMHoRST MoDel bD 2100 TRAMex SURVey enCoUnTeR TRAMex PRoFeSSionAl Pin-TyPe

Range Wood: 6 to 40% gypsum: 0.2 to 50% Wood: 5 to 30% (relative readings for walls, roofing and other materials) Wood: 6 to 44% (readings above 27% are indicative only)

Vaisala Humidity and Temperature Meter Model HM34

Accurately check temperature and relative humidity •in applications such as indoor air quality surveys and industrial monitoring and inspectionsEasy to use and fast response •

Range Accuracy Resolution Response Time battery life

Temperature Relative Humidity -4° to 140°F 0 to 100% rH ± 0.5°F ±2% of 0 to 90% rH, ±3% at 90 to 100% rH 0.1°F 0.1% 15 seconds up to 50hrs operation

inDooR AiR QUAliTy

Vaisala Humidity and Temperature Meter Model HM34


ENV19

Tramex Concrete Moisture Encounter for Flooring

Tramex Concrete Moisture Encounter for Flooring

Non-invasive meter that measures moisture in •concrete, sand/cement or gypsum screedOperates on the principle of non-destructive •impedance measurementDuring operation, a low frequency signal is •transmitted into the concrete or floor screed to measure the change in impedance caused by the presence of moisture

Range

Concrete: 2 to 6% gypsum Floor Screed: 0 to 10%

inDooR AiR QUAliTy

RAE PPB PID Model PGM 7240 and PPB 3000

RAE Systems Parts-Per-Billion PID’s

PPB PID Model PGM 7240•PPB 3000•

The RAE PPB PID Model PGM 7240 uses true parts per billion detection of extremely low level, low vapor pressure and highly toxic volatile organic compounds (VOCs). This PID is perfect for the measurement of pesticide residues, low level permeation breakthrough detection, hypo-allergenic cleanroom studies or outgassing of new building materials such as carpets, fabrics or furniture. The RAE PPB 3000 is ideal for applications in HazMat detection, Homeland Security and other military protection or industrial hygiene and indoor air quality studies.

RAe PPb PiD MoDel PgM 7240

measurement range approvals RAe PPb 3000 measurement range approvals

0 to 999ppb at 1ppb resolution 10.0 to 9.99ppm at 0.01ppm resolution 100 to 199ppm at 1ppm resolution intrinsically safe, Ul and cUl Class i, Division 1, groups a, B, C, D, EEx ia iiC t4 1 to 10,000ppm iP67 unit off and without flexible probe, iP65 unit running

800-242-3910

ENV 20

RAE Systems IAQRAE Indoor Air Quality Monitor Model PGM 5210

RAE Systems IAQRAE Indoor Air Quality Monitor Model PGM 5210

Combines a PID with IAQ parameters (Temp, RH, •CO2 and user selected toxic gas sensor)Built in diaphragm pump for sampling•Continuous measurement of temperature and •relative humidity

DeTeCToR SPeCiFiCATionS

Sampling Pump Temperature Humidity

internal integrated diaphragm pump with programmable “duty-cycle” for PiD self cleaning during long continuous run time 32° to 104°F (0 to 40°C) 0% to 95% relative humidity (non-condensing)

SenSoR SPeCiFiCATionS

gas Monitor VoCs Carbon Dioxide Carbon Monoxide Hydrogen Sulfide Sulfur Dioxide nitric oxide nitrogen Dioxide Chlorine Hydrogen Cyanide Ammonia Phosphine

Range (ppm) Resolution (ppm) 0.01 to 9.99 0.01 10.0 to 99.9 0.1 100 to 500 1 0 to 20,000 10 0 to 500 1 0 to 100 1 0 to 20.0 0.1 0 to 250 1 0 to 20.0 0.1 1 to 10.0 0.1 0 to 100 1 0 to 50 1 0 to 5.0 0.1

RAE Systems AreaRAE Wireless Gas Detection System

Five-Sensor System with Built-In Modem•LEL, O2, CO, H2S, plus a PID for VOCs•Wireless communication range as far as two miles•Works with any personal computer as the •base stationExcellent for perimeter or in-plant monitoring •

Sensors oxygen Combustible gas Carbon monoxide Hydrogen sulfide Photoionization detector With 10.6 eV lamp Approvals Alarm

Range Resolution Response Time 0 to 30% 0.1% 15sec 0 to 100% lEl 1% 15sec 0 to 500ppm 1ppm 20sec 0 to 100ppm 1ppm 15sec 0 to 200ppm 0.1ppm 10sec 200 to 2000ppm 1ppm 10sec intrinsically safe model 5020: Ul, class 1 Division ii, groups a, B, C, D model 5010: Ul, Class 1 Division 1, groups, a, B, C, D, Class 2 groups E, F, g hazardous locations, temp Code t3C 100dB buzzer and flashing red lED cluster indicate exceeded preset limits, low battery or sensor failure. Separate alarm limit settings for tWa, StEl, low and high

inDooR AiR QUAliTy

RAE Systems AreaRAE Wireless Gas Detection System


ENV21

Zefon Bio-Pump

Zefon Bio-Pump Easy sampling with Air-O-Cell® and •Via-Cell® cassettesQuiet operation and easy to read LCD screen •

Flow Rate Accuracy battery life

15lPm ±5% about 30, 5 minute samples

inDUSTRiAl Hygiene

Dawson 1-300, Sensidyne GilAir 5RC and SKC AirChek 52

Sampling Pumps Sensidyne GilAir 5RC•Dawson 1-300•SKC AirChek 52 Personal Sampling Pump•

These sampling pumps are ideal for sampling airborne particulates, aerosols and toxic gases and vapors in applications in environmental testing, industrial hygiene and safety testing.

SenSiDyne gilAiR 5RC

operating ranges: Constant High Flow Constant low Flow Constant Pressure approvals: SkC AiRCHek 52 range: Compensation range: DAWSon 1-300 Flow rate:

750 to 5000cc/min up to 38” of water 5 to 500cc/min up to 20” of water 5 to 500cc/min up to 20” of water intrinsically safe 5 to 3000ml/min 5 to 500ml/min with constant pressure controller 1000ml/min up to 25” of water 2500ml/min up to 25” of water 300ml/min up to 15” of water 3 to 20iPm

800-242-3910

ENV 22

BIOS DryCal DC-Lite Calibrator Dry Primary Standard Calibrator•Used for accurate calibration of all commercially •available industrial hygiene and environmental air sampling pumpsNIST traceable calibration•Simple push-button operation •

Flow Range DC-lite Model DCl 12k Flow Range-Medium Model DCl 40k Flow Range-High Model DCl 40k Air Flow Accuracy

10ml/min to 12 ipm 20ml/min 20 ipm 1 to 40 ipm ±2% single reading ±1% averaged reading

inDUSTRiAl Hygiene

BIOS DryCal DC-Lite Calibrator

Quest Temp 34 Area Heat Stress Monitor

Quest Temp 34 Area Heat Stress Monitor

Datalogging Thermal Environment Monitor•NIST traceable calibration •

Temperature Accuracy Relative Humidity User Programmable Data-logging intervals Data-logging Capacity output Approvals

23° to 212°F (-5° to 100° C) ± 0.9°F (± 0.5°C) 0 to 100% rH / accuracy ±5% Degrees C or F 1,2,5,10,15,30 or 60min 11 days at 1 minute intervals rS-232 port Ul/CSa intrinsically safe for Class i, groups, a, B, C, D, and Class iii, groups E, F, g, temperature Code t3


ENV23

Thermo MIE Personal DataRAM PDR 1000 AN

Thermo MIE Personal DataRAM PDR 1000 AN

Direct-Read Personal Aerosol Monitor•Measures concentrations of dust, smoke, mists •and fumes in real timeAudible alarm if user defined level is exceeded•Integral data-logging•Extremely compact and rugged •

Concentration Measurement Range Resolution Accuracy Particle Size Range of Max. Response Datalogging output

0.001 to 400mg/m³ 0.1% of reading or 0.001mg/m³ whichever is greater ± 5% of reading 0.1 to 10µm 13,000 data points, with average concentration, time/date and data point number for each, stored in 1 to 99 data sets rS-232 port

inDUSTRiAl Hygiene

Thermo MIE DataRAM 4 DR-4000

Thermo MIE DataRAM 4 DR-4000 With appropriate particle discriminators, the •DataRAM provides measurements correlated with PM10, PM2.5 and respirable fractionsVolume median particle sizes measured to 0.05µm •Continuously monitors the real-time concentration •and median particle size of airborne dust, smoke, mist, and fumes Patented two-wavelength particle detection system •provides the volume median particle diameter of the sampled aerosol, over a concentration range of up to 400mg/m3

Monitors the concentrations of fine particulates in •ambient air by a combination of aerodynamic size preselection, two-wavelength nephelometry and concurrent sensing/correction for relative humidity

Range Accuracy Particle Size Range Maximum Response (Concentration Measurements) Sample Flow Rate Datalogging output

0.0001 to 400mg/m³ (autoranging) +/-2% of reading 0.08 to 10µm 1.0 to 3.0 liters/minute 50,000 data points in up to 9 data groups rS-232/rS-485 port

800-242-3910

ENV 24

Holaday Industries Magnetic Field Monitors • Holaday Industries Low Frequency EMF System

Models 3603, 3604 and 3616Holaday Industries ELF Magnetic Field Meter •Model 3627Holaday Industries DC Magnetic Field Meter •Model 3550

The 3604 evaluates electric and magnetic fields associated with 50/6- Hertz power lines and electrically operated equipment and appliances. The 3603 radiation survey meter is designed for measuring the complex electromagnetic field emissions from computers, video display terminals, any CRT or similar devices. The ELF 3627 gathers isotropic measurements from any ELF source such as electrical circuits, VDT’s, household wiring and appliances. The DC 3550 is a portable device used to monitor static (DC) magnetic fields from medical diagnostic instruments.

eMF 3603 3604 elF 3627 DC 3550

Range E-Field: 1 to 2000v/m H-Field: 1v/m to 200 kv/m E-Field: 1 to 200kv/m H-Field: 0.1mgauss to 20 gauss 2, 20, 200mgauss, 2, 20gauss full scale 0.1 mt to 0.3t

inDUSTRiAl Hygiene

Holiday Industries DC 3550, Low Frequency EMF 3603 and DC 3550

Holaday Industries Broadband RF Field Strength Meter Model HI 4012

Holaday Industries Broadband RF Field Strength Meter Model HI 4012

Automatic self-zeroing ci• rcuitAccurate in any RF/microwave field en• vironmentDesigned for maximum accuracy and ease of •operation

Frequency Response E-Field H-Field Dynamic Range E-Field H-Field Accuracy at Calibration Frequencies Power Probe length

0.5mHz to 5gHz, ± 2dB 5mHz to 300mHz ± 2dB Probe 10² to 106v²/m² Probe .001 to 10a²/m² 0.5dB 14 C-size batteries 30” with 60” cable


ENV25

International Light Radiometer/Photometer Model 1400A

International Light Radiometer/Photometer Model 1400A

Ideal for use in phototherapy, health hazard, •environmental and R&D applications

UV Actinic Detector iR Hazard Detector illuminance Detector UVA Hazard Detector laser Power Radiometer leD Measurement Dynamic Range linearity

Sel 240/T2 ACTS- Spectrally matches the new extended Uv hazard band established by aCgiH and recommended by nioSH from 190 to 400nm, For tlv Uv hazard exposure and atmospheric ozone depletion measurements Sel 623/SCS 695/W- For aCgiH ir Hazard measurements, Spectra range is 675 to 3200nm SCl 110-measures the extremes of photometric illuminance from starlight to sunlight, Dynamic range of 200mlux to 700klux, Direct readout in foot-candles Sel 033/UVA/W- Provides fast and accurate irradiance measurements of any Uva type source (including phototherapy, nDt and entertainment- blacklight), Spectral range of 315 to 390nm SPl 024F- For simple, accurate measurement of low power continuous lasers (such as argon, Hene adn ndYag), Dynamic range of 100 nW to 300mW, Spectral range of 350 to 1060nm SPl 024y- For applications where optical coupling or directional visibility of an lED is important, Dynamic range of 5x10-7 to 1x10³ lumens 10pa to 350ma ±0.2%, ±1 digit on the low end

Holaday Industries Microwave Survey Meter Model 1600

Holaday Industries Microwave Survey Meter Model 1600

Measures microwave leakage from ovens operating •at 2450MHz and 915MHzThree survey ranges•Easy-to-read front panel analog •

Ranges Accuracy Response Time Maximum Power Density

0 to 10mW/cm² at 2450 mHz 0 to 10 and 0 to 20mW/cm² at 915 mHz ± 1 dB 1 second fast, 2.5 seconds slow, to 90% of final value for a step input 2.0W/cm²

inDUSTRiAl Hygiene

800-242-3910

ENV 26

Alpha, Beta, Gamma, X-Ray Radiation Survey S.E. International Radiation Monitor Model 4EC•Ludlum M-3 Survey meter with 44-2 Probe•Ludlum 2241 Digital Survey Meter with 44-9 Pancake Probe•Victoreen 190 Survey and Count Rate Meter•Victoreen ASM 990 Kit•

Our variety of detectors from S.E. International, Ludlum and Victoreen are ideal for measuring radiation levels in many health and medical applications such as nuclear and radiation therapy, diagnostic x-rays and research labs. Other uses outside of the medical field include observation of mines, power plants, geological surveys, HazMat and scrap metal yards.

S.e. inTeRnATionAl 4eC lUDlUM M-3 WiTH 44-2 PRobe lUDlUM 2241 WiTH 44-9 PRobe ViCToReen 190 ViCToReen ASM 990 kiT

Radiation Detected Range Sensitivity alpha, beta, gamma, X-ray 0 to 0.5, 0 to 5, 0 to 50mr/hr Detects alpha to 2.5mev, >80% efficiency 0 to 500, 0 to 5,000, 0 to 50,000CPm Detects beta at 50kev with 35% efficiency 0 to 5, 0 to 50 0 to 500µ Sv/hr Detects beta at 150kev with 75% efficiency Detects gamma and X-rays to 10kev through the end window, 40kev minimum through the case gamma 60kev to 1.25mev typically 175cpm/µr/hr (137Cs gamma) alpha, beta, gamma typically 3300cpm, mr/hr (137Cs gamma) alpha, beta, gamma, X-ray 1µr/h to 1r/h or 1CPm to 1,000,000CPm alpha, beta, gamma, neutron, X-ray 1µr/h to 1r/h or 1CPm to 5,000,000CPm

inDUSTRiAl Hygiene

S.E. International Radiation Monitor Model 4EC

Ludlum M-3 Survey Meter with 44-2 Probe

Victoreen ASM 990 Kit

Victoreen 190 Survey and Count Rate Meter

Ludlum 2241 Digital Survey Meter with 44-9 Pancake Probe


ENV27 PoSiTiVe MATeRiAl iDenTiFiCATion (PMi)

RMD XRF LPA-1 Lead Paint Analyzer •Quickly quantify lead content on painted substrates including wood and metal from 0.25 to 0.375” thick. The unit’s “Quick Mode” setting automatically adjusts the measurement time to the least time needed to make a definitive measurement.

Thermo Scientific Niton XLp Series 700 Multi-Element •This high-resolution silicon PIN diode detector system will identify many metallic components, including steel, brass, copper and titanium alloys. Ergonomic design includes touch screen data entry RS-232 port for PC integration.

Thermo Scientific Niton XLT 898D• The 898 XLT features patented high-speed electronics for unequaled performance. It is capable of analyzing multiple elements via X-ray fluorescence spectroscopy.

Innov-X Systems X-Series PMI XRF• Three testing modes are featured in the X-Series: Fast ID Mode provides rapid spectral signature matching for grade ID plus alloy chemistry, Analytical Mode provides a full chemistry analysis using the method of fundamental parameters, plus grade matching to grade table specifications and Pass/Fail Mode is a rapid sorting mode.

this XrF analyzer utilizes a rugged x-ray tube instead of radioactive isotopes, drastically reducing radiation licensing issues and may be carried and shipped without hazardous materials restrictions. regulatory requirements for Pmi instruments vary widely from state to state and certification or licensing may be required prior to rental, contact us for details. this item is available in the U.S. only.

Customers must possess a user license with Canadian nuclear Safety Commission prior to shipment of the niton Xlp radioactive source-based analyzers. license applications may be attained from the CnSC. this item is available in Canada only.

Standard grade libraries available in the Appendix for Innov-X: pg. v-vi, Niton: pg. vii-x.

Our RMD, Thermo Niton and Innov-XRF analyzers are capable of undertaking a variety of both industrial and environmental monitoring applications. Whether your job requires the analysis of alloy chemistry, grade ID, metal concentration in soil or screening of electronics and consumer goods we have an analyzer to fit your needs.

Positive Material Identification

Thermo XLp Series 700

Thermo XLT 898D

Innov-X X-Series

RMD LPA-1

800-242-3910

ENV 28

Sound Level Meters Casella CEL-254 Type 2 with • Model 282 CalibratorCasella CEL-480 Type 1 and 2•Quest Impulse Integrating Sound Level Meters •Models 1800 Type 1 and 2800 Type 2Quest Model 2900 Integrating/Datalogging •Sound Level MeterQuest Model 2100•

The sound level meters from Casella and Quest are ideal for use in environmental and community research, noise control analysis, industrial site noise levels and traffic and transportation studies.

Casella Cel-254 Casella Cel-480 Quest 1800 Quest 2900 Quest 2100

Range Frequency 30 to 135dB(a) a, C type 2 measurement 10 to 140dB in seven a, C, Z 60dB ranges 35 to 140 dBa a, B, C, linear 20 to 140dB in seven a, C, linear 60dB ranges 30 to 140dBa, a,C 40 to 140dBC

SoUnD, noiSe & VibRATion MoniToRing

Quest 2900, Quest 2100 and Casella CEL-480

Quest OB-100 and OB-300 Octave Band Filter Sets

Quest OB-100 and OB-300 Octave Band Filter Sets

Use with 1800/2800 or 1900/2900 sound level •meters to expand capabilities to octave band analysisAuto and manual modes•

Frequency Selection Power Source Standards Ranges

Full manual control or automatic sequential stepping through each frequency band Sound level meter anSi S1.11 order 3 and iEC r225 oB-100 10 ranges with center frequencies from 31.5 Hz to 16 kHz in full octave bands oB-300 33 ranges from 12.5 Hz to 20 kHz in one-third octave bands, plus 11 full-band ranges from 16 Hz to 16 kHz


ENV29

Instantel Minimate Plus

Instantel Minimate Plus A perfect vibration monitor for construction/•demolition activity, blast-monitoring for compliance, pile driving, bridge and heavy transportation monitoring or structural monitoring and analysisCaptures full waveform records while recording in •histogram mode8 user-programmable channels available for •advanced monitoring applications

Sample Rates Datalogging

1,024 S/s to 16,384 S/s per channel, selectable up to 65,536 S/s for 8 channels 300 events

Quest Edge eg5, Quest Noise Pro DLX and Casella CEL-360

Noise Dosimeters Casella CEL-360 and CEL-460•Quest Noise Pro DLX•Quest Edge eg5•

The Casella and Quest noise dosimeters are an excellent choice for occupational hygienists to measure worker noise exposure. These dosimeters feature datalogging capabilities, a variety of available measurements and can be configured to meet specific regulatory standards such as OSHA or ISO. The Quest Noise Pro DLX and Quest Edge eg5 are intrinsically safe instruments.

CASellA Cel-360 AnD Cel-460 QUeST noiSe PRo Dlx QUeST eDge eg5

Range 35 to 140dBa 40 to 110dB rmS 70 to 140dB rmS 115 to 143dB Peak 70 to 140dB rmS 110 to 143dB Peak


800-242-3910

ENV 30

Quest Vibration Meter Model VI 100

Basic wideband vibration meter designed for use •in industrial or environmental applications such as shock or pulsation checks, basic machinery condition monitoring, quality specification checks or general engineering work Direct readings of acceleration, velocity, •displacement

Acceleration Velocity Displacement Frequency battery life

0.01 to 19.99, 0.1 to 199.9 g’s 0.01 to 19.99, 0.1 to 199.0cm/sec 0.01 to 19.99, 0.1to 199.9 meters x 10 -5 5 to 10,000Hz 40 hours operation


Quest Vibration Meter Model VI 100

Quest Havpro Vibration Monitor

Quest Havpro Vibration Monitor Excellent screening tool for quickly and simply •determining the presence and magnitude of hazardous hand-arm and whole-body vibration levelsUp to three simultaneous measurement channels•Comprehensive summary and time history data•Conforms to the requirements of the human •vibration standards

Dynamic Range Frequency Range interface Standards

60dB 0.5 to 3000Hz ± 5%, 0.3 to 5000Hz ± 10% rS-232 serial interface on 8-pin Din, up to 115kbps CE compliant, iSo 8041: 1990 and 1:1999, 2631, 5349, anSi S3.34, anSi 3.18


know more?


ENV31

Interscan Toxic Gas Analyzers 4000 Series Portables

Interscan Toxic Gas Analyzers 4000 Series Portables

Highly acute sample-draw sensor•Features include: no • cell rupture or acid damage, the elimination of undesirable sensor noise (particularly when high amplifier gain is required for low concentration measurements) and no reference electrode contamination

Accuracy Minimum Detectable Concentration linearity Analog output Approvals

±2% of reading 1.0% of full scale ± 1% of full scale 0 to 100mv full scale Ul Classified intrinsically Safe for use in hazardous locations, Class i, groups a, B, C, D

4000 Series Analyzers are available for detecting:

nitrogen Dioxide Formaldehyde Ethylene oxide

Chlorine Dioxide Chlorine Hydrogen Chloride

ToxiC gAS MoniToRing

Industrial Scientific T82, MSA Pulsar +H2S and National Draeger PAC III

Single Gas Monitors Industrial Scientific T82•National Drager PAC III •MSA Pulsar + H• 2S

Our selection of single gas monitors are perfect for use in confined space monitoring and a variety of industrial applications, even in the harshest conditions such as underground mines and oil rigs. The Industrial Scientific T82 and National Drager PAC III are intrinsically safe instruments

inDUSTRiAl SCienTiFiC T82 Carbon monoxide Hydrogen Sulfide nATionAl DRAgeR PAC iii Carbon monoxide Hydrogen Sulfide ammonia Sulfur Dioxide Hydrogen Cyanide Chlorine MSA PUlSAR + H2S oxygen Carbon monoxide Hydrogen Sulfide

Range Resolution 0 to 1500ppm 1pmm 0 to 500ppm 1ppm 0 to 200ppm 1ppm 0 to 100ppm 1ppm 0 to 300ppm 1ppm 0 to 50ppm 0.01ppm 0 to 25% 0.1% 0 to 500ppm 1ppm 0 to 200ppm 1ppm

800-242-3910

ENV 32

Mercury Vapor Analyzers Jerome 405•Jerome 431-X and 431-XC•Jerome 471•Ohio Lumex RA-915 Light •

The mercury vapor analyzers form Jerome and Ohio Lumex are ideal for use in a wide variety of mercury-related applications such as mercury surveys and spill response, industrial hygiene monitoring, hazardous waste site and landfill monitoring, indoor/outdoor air quality testing, mercury exclusion tests and exhaust duct monitoring.

JeRoMe 405 JeRoMe 431-x AnD 431-xC JeRoMe 471 oHio lUMex RA-915 ligHT

Range 0.5 to 999µg/m3 0 to 0.999µg/m3 0.030 to 250µg/m³ 0.1 to 100μg/m3


Jerome 413-X and Ohio Lumex RA-915 Light

Jerome Hydrogen Sulfide Analyzer Model 631-X

Jerome Hydrogen Sulfide Analyzer Models 631-X and 631-XC

Appropriate for odor nuisance monitoring, scrubber •efficiency testing, leak detection, regulatory compliance, corrosion control and as an accuracy check for other hydrogen sulfide monitors and control systems Offers a survey mode to pinpoint an H2S source •detection

Range Sensitivity Accuracy Response Time Flow Rate output optional

0.001ppm to 50ppm 0.003ppm ± 0.003ppm at 0.050ppm, ± 0.03ppm at 0.50ppm, ± 0.3ppm at 5.0ppm, ± 2ppm at 25ppm 3 to 30 seconds, depends on mode and concentration 150cc/min rS-232 port (model 631-XC) 431/631 Datalogger


ENV33

Zelleweger ChemKey TLD

Toxic Gas Monitors Zellweger ChemKey TLD•Scott GMD NextStep•

These toxic gas monitors from Zellweger and Scott are ideal for temporary facility monitoring, R&D projects, spill remediation and emergency response. By utilizing chemically sensitive casettes, these instruments are able to detect a wide variety of gases in concentrations of ppm or ppb.

zellWegeR CHeM key TlD SCoTT gMD nexTSTeP

Detectable gases amines, diisocyanates, hydrazines, hydrides, hydrogen cyanide, hydrogen sulfide, mineral acids, oxidizers, phosgene, sulfur dioxide arsine, CHDi, chlorine, chlorine dioxide, HDi, HmDi, iPDi, mDi, Phosgenes, velcorin, Hydrazine, mmH and more


Thermo Scientific Miran SapphlRe Ambient Air Analyzer

Thermo Scientific SapphlRe Ambient Air Analyzer

Model XL & SL Portable Gas Detection Systems •(formerly Foxboro 100E & SE30 Models)Infrared spectrophotometer system•Applications include ventilation studies, leak •detection, IAQ assessments, unknown gas detection, monitoring medical air and anesthetic gases, process maintenance, and workplace monitoring for toxic vaporsOn-board datalogging•The operator selects a compound from a library of •100 factory installed gases Automatically references the appropriate •calibration information the configures itself to measure the target compound and delivers concentration readings in about 10 secondsSapphIRe Library located on Appendix pg. ii-iv•

Measurement Range Display Pump Flow Rate Response Time output

any compound in infrared wavelength region from 7.7 to 14.1 microns ppm, ppb or percent, user selectable 22 1/min 10 sec 0 to 1v, parallel printer, rS-232

800-242-3910

ENV 34

Laurus Systems Chem-ID A parts-per-billion gas analyzer that characterizes •chemicals using two-dimensional gas chromatographyEach chemical signature contains information on •the individual compounds and concentrations of the chemicals present in the sample. Produces and records the two-dimensional •chromatograph signature of the sample, and clean itself in preparation for the next testThe two gas chromatograph columns in the •standard chem-ID use DB-1 (Dimethylpolysiloxane ) and DB-wax (Polyethylene glycol) stationary phasesAlmost any column can be installed to meet your •unique test requirements

Sensitivity Detectors Carrier Vibration emissions Approved Decon Methods

25ppb (2) thermal Conductivity Ultra-pure helium aStm D4169-04a FCC certified External high pressure wash and brush


Laurus Systems Chem-ID

National Drager Accuro 2000 Bellows Pump

National Drager Accuro 2000 Bellows Pump

Gas detection tube system that solves a wide •range of gas measurement problems Detecting more than 350 gases, vapors and •aerosolsFor spot checks or single-stroke sampling•Features • built-in stroke counter and end-of-stroke indicator


ENV35

Diversified Research Alpha II Radon Detector

Diversified Research Alpha II Radon Detector

Real-time measurement of radon concentration for •1 hour to 7 yearsDisplays average concentration on built in LCD •display or printed through the stand alone printer or your PC printerDesigned for environmental surveyors, building •contractors, real estate professionals and researchersThe stability of the solid state detector design does •not require frequent re-calibration Background noise (due to electrical interference) is •filtered out by the unique design of the instrument and softwareExceeds EPA Accuracy requirements•

Measurement Sensitivity Maximum Total error lower limit of Detection Measurement interval Continuous Measurement Range

radon concentration in pico Curies per liter of air (pCi/i) Bq/m3 4.5 ± 1 alpha counts/hour (pCi/i) less than ±3% <0.1 pCi/i 1 to 999 hours 1 hour to 2664 days


Radiodetection MGD-2002 Multi-Gas Leak Detector

Radiodetection MGD-2002 Multi-Gas Leak Locator

Excellent for use during soil vapor sampling using •helium as a tracerWide dynamic range•

Humidity Range Sensitivity Tracer gases Resolution battery life

10% rH to 50% rH min = 25ppm max = 1,000,000ppm (100%) Hydrogen (H) Helium (He) low range = +/ -25ppm High range = +/ -0.2% 6 to 9hrs

800-242-3910

ENV 36

Underground Location Systems Mala Geoscience CX-11 Concrete Radar•Proceq Profometer 5 Rebar Locator•

The Mala Geoxcience CX-11 combines radar and Electro-Magnetic (EM) technology to locate and identify energized power cables, rebar and post-tension cables. Rapidly scan areas for 2D locating and to mark targets or collect data on a grid mat supplied with the system for “in the box” 3D imaging. The Proceq Profometer 5 utilizes the eddy current measuring method with pulse induction to ensure a high measuring stability. The Profometer 5 is ideal for locating reinforcing bars and welded wire meshes in up to 10” of cover.

UnDeRgRoUnD loCATion

Mala Geoscience CX-11 and Proceq Profometer 5

Schonstedt Pipe and Cable Locator Model MAC51BX

Schonstedt Pipe and Cable Locator Model MAC51BX

Two active frequencies • for pipe, cable and line tracking and a magnetic mode for finding underground ferrous pipes, water meters and valves, property and survey markers or anything with a magnetic field.Passive operation for finding iron and steel targets, •energized power lines

Audio output RF output Mode

Receiver Transmitter 40 Hz idling tone from 2.58 kHz pulsed speaker, pulsing tone at 4.4Hz increases or decreases with signal intensity 82.5kHz modulated at 382Hz, pulsed at 404Hz lo and High Mode the receiver’s audio signal provides a sharp null when its tip is directly over the target Mag Mode does not use the transmitter, the audio signal peaks when the receiver’s tip is over the target.


ENV37

Masterflex 0757100, Geotech Series II and ProActiveTM Stainless Steel Mega Monsoon

Sampling Pumps Masterflex 0757100 Environmental Sampling Pump•Geotech Series II Peristaltic Pump•Gundfos Redi-Flo2 Submersible Pump•ProActive• TM Stainless Steel Mega Monsoon

The Masterflex Environmental Sampling Pump is a battery operated, portable sampling drive. This unit features easy to control pump speed, a quick load pump head and has a flow rate of 0.06 to 680ml/min, depending on tubing. The Geotech Series II is for single and multi-stage pressure or vacuum pumping. The Series II is able to operate at a depth of 27’ at sea level, so it is ideal for sample removal from shallow wells or any surface water source. The Grundfos Redi-Flo2 is ideal for a variety of environmental applications including groundwater purging or sampling and conducting aquifer tests to a depth of 250’. Adjustable flow rate from 100ml/min to 9gal/min allows for uninterrupted sampling and pumping.The ProActiveTM Stainless Steel Mega Monsoon is appropriate for low flow sampling or ground water purging of monitoring wells. Its small probe design fits easily into 2” spaces or larger.

WATeR MoniToRing inSTRUMenTS

QED Sample Pro Consultant Kit

QED Sample Pro Consultant Kit Bladder pump and low-flow controller•Available in 1.75” and .75” diameters•Compatible with the MP10 Controller and •MP20D Flow Cell

Sample Pro 1.75” Flow rates maximum lift Pump volume Sample Pro 0.75” maximum lift Pump volume maximum Pump Depth: mP10 Controller mP10H Controller

(.25” x .25” oD tubing) 1.2imP at 25’, 400ml/min at 150’ max 250’ 100ml 200’ 10ml 250’ 600’

800-242-3910

ENV 38

Flow Cell Water Quality Systems Horiba U-53G•QED MP20D and MP20DT•

Our flow cell water quality systems from Horiba and QED are ideal for measuring the water quality in lakes and rivers, around industrial waste water plants or factories and in other environmental applications. The integrated flow cell technology provides thorough mixing of samples so no “dead spots” will interfere with parameter measurements.These systems measure a variety of parameters, including:

HoRibA U-53g QeD MP20D AnD MP20DT

pH, dissolved oxygen, conductivity, orP, temperature, salinity, specific gravity of seawater, tDS, turbidity, water depth pH, dissolved oxygen, conductivity, orP, temperature, salinity


QED MP20D Water Quality Flow Cell

Horiba U-22 and YSI Multiprobe 556

Water Quality Systems Horiba U-22 •Horiba U-10•YSI Multiprobe 556•YSI 600QS and 600XL•

These water quality systems are perfect for use in applications such as factory effluent and urban drainage testing, lake and river monitoring and aquatic culture tank or agricultural water supply testing. Monitor sea, fresh, brackish, polluted or ground water with ease. These systems measure a variety of parameters, including:

Horiba U-22 Horiba U-10 ySi Multiprobe 556 ySi 600QS and 600xl

pH, dissolved oxygen, conductivity, salinity, tDS, seawater specific gravity, turbidity, oxidation reduction potential pH, dissolved oxygen, conductivity, salinity, turbidity, temperature pH, dissolved oxygen, conductivity, salinity, orP pH, dissolved oxygen, conductivity, salinity, orP, air saturation


ENV39

Myron 6P Water Quality Meter with Six Parameters

Myron 6P Six Parameter Water Quality Meter

Easy sampling: fill built-in cup with sample and •select parameter keyMemory stores and recalls up to 20 readings•Appropriate for environmental groundwater •testing, use in boilers and cooling towers, reverse osmosis, plating and parts washing, fountain solutions for printing, irrigation water, hydroponics, process verification, de-ionization and moreWaterproof to 3’•

pH oRP Conductivity TDS Resistivity Protection Rating

Range Resolution Accuracy 0 to 14pH 0.01pH ±0.01pH ±999mv ±1mv ±1mv 0 to 9,999mS, 0.01 < 100µS ±1% 10 to 200mS 0.1 < 1000µS in 5 autoranges 1.0 > 1000µS 0 to 9999ppm, 0.01 < 100ppm ±1% 10 to 200ppt 0.1 < 1000ppm in 5 autoranges 1.0 > 1000ppm 10KΩ to 30mΩ 0.01 < 100KΩ ±1% 0.1 < 1,000KΩ 0.01 > 1mΩ iP67/nEma 6


Teledyne ISCO 6712 Full-Size Portable Sampler

Teledyne ISCO 6712 Full-Size Portable Sampler

Suitable for applications in wastewater effluent, •stormwater monitoring, CSO monitoring, permit compliance and pretreatment complianceAdvanced 6712 Controller allows selection of •different program modulesFeatures vacuum formed ABS plastic shell to •withstand harsh exposure4MB for datalogging •Choice of 11 different glass and plastic bottle •configurations ranging from 24 x 1liter to 1 x 5.5 gallon (consumables available upon request)Pump revolution counter and patented liquid •detection sensor ensure accurate sample volumes and tells you when tubing should be replaced

Maximum lift Sample Frequency Sampling Modes

28’ (8.5m) 1min to 99hrs 59mins, in 1min increments, non-uniform times in minutes or clock times 1 to 9,999 flow pulses

Uniform time, non-uniform time, flow, event (flow mode is controlled by external flow meter pulses)

800-242-3910

ENV 40

Water Level Dataloggers Heron Dipper Log•Solinst 3001 Levelogger Gold•In-Situ Troll 700 and 9500•In-Situ miniTroll Water Level Meter•

The Heron Dipper Log is a single channel datalogger used for measuring continunous water levels in wells, bore holes and open bodies of water. This unit features datalogging, PC integration and a 0.72” probe. The Solinst Levelogger Gold is a self contained, high-accuracy water level and temperature datalogger. It features 0.05% FS accuracy, 10-year battery and memory for 40,000 sets of readings. This instrument is user-friendly, with intuitive software, direct read or wireline deployment and upgradeable firmware. Maintenance-free design makes this instrument ideal for long-term water level monitoring. Please ask about the Leveloader Gold, a rugged data transfer device designed for use with Solinst Leveloggers. The In-Situ Troll 700 is appropriate for precision river gauging, tidal influence studies or geothermal research. This instrument takes quick samples (0.25 seconds) and up to 4MB of datalogging.The In-Situ miniTroll monitors rivers, lakes and wells in long or short term projects. It features small diameter (0.72”) and datalogging.


Solinst Levelogger Gold and Barologger, In-Situ Troll 700 and Heron Dipper Log

Geotech ORS, Heron and Solinst Oil/Water Interface Meters

Oil and Water Interface Meters Heron Oil/Water Interface Meter•Solinst Oil/Water Interface Meter•Geotech ORS Oil/Water Interface Probe •

The oil and water interface meters by Heron, Solinst and Geotech are appropriate for monitoring and remediating oil-contaminated groundwater, wells and tanks. These instruments are intrinsically safe, portable and feature rugged narrow probes (5/8”) to fit into many narrow-gauge spaces.


ENV41

Hanna Instruments pH/Temperature Meter Model HI 9025C

Hanna Instruments pH/Temperature Meter Model HI 9025C

Simultaneous LCD display of pH or mV •and temperature5 memorized pH buffer values for easy calibration•Auto-instruction function guides the user step by •step through calibration processHoused in a rugged, waterproof case designed to •withstand rough handling and the everyday rigors of field testing

Range Resolution Accuracy Temperature Compensation operating Temperature

pH mV (oRP) Temperature 0.00 to ±1,999mv 32° to 212°F 14.00pH (0.0° to 100°C) 0.01pH 1mv 0.18° F (0.1°C) ±0.01pH ±1mv ±0.9° F (±5 °C) automatic or manual from 32° to 212°F (0° to 100° C) 32° to 122°F (0° to 50°C)


YSI Model 550A Handheld Dissolved Oxygen Instrument

YSI Model 550A Handheld Dissolved Oxygen Instrument

Easy-to-use backlit display, automatic push-button •calibration, and a weighted, quick-sinking probeExpanded DO and salinity ranges for a wider •application range

Medium Dissolved oxygen Sensor Dissolved oxygen Probe Accuracy Range Resolution Temperature Specifications

Fresh, sea or polluted water Steady state polarographic Field-replaceable module 0 to 20mg/l; ±0.3mg/l or ±2% of reading, whichever is greater 20 to 50mg/l; ±6% of reading 0 to 200%; ±2% air saturation or ±2% of reading, whichever is greater 200 to 500%; ±6% of reading 0 - 50mg/l 0-500% of air saturation -5° to 45° C temperature 0.01mg/l or 0/1 mg/l, user selectable 0.1% air saturation or 1%, user selectable 0.1° C temperature Accuracy Range Resolution ±3° C -5° to 45° C 0.1°C

800-242-3910

ENV 42

Turbidity Meters HF Scientific DRT-15CE•LaMotte 2020 •

The HF Scientific DRT-15CE is an EPA approved, self contained unit for easy field use. Three user-selectable ranges provide accuracy in a wide variety of applications, from 0 to 1000 NTU. The LaMotte 2020 is a small turbidity meter with lab accuracy measurements for regulatory monitoring, process water testing and environmental water analysis. An EPA compliance mode rounds readings to EPA reporting requirements.

HF SCienTiFiC DRT-15Ce

range accuracy resolution lAMoTTe 2020 range accuracy resolution

0 to 10, 100 or 1000 ntU ±1% of full scale (1 to 10) ±5% of full scale (0 to 100) ±10% of full scale (0 to 1000) 0.1% of selected range 0 to 1100 ntU 0.01 (0 to 11) 0.1 (11 to 110) 1 at (110 to 1100) ±2% of reading below 100 ntU ±3% above 100 ntU


HF Scientific DRT-15CE and LaMotte 2020

Turner Designs Aquafluor™ Handheld Fluorometer/ Turbidimeter

Turner Designs Aquafluor™ Handheld Fluorometer/ Turbidimeter

Dedicated dual channels: The press of one button •easily toggles between the two applicationsFloating capability and watertight design: No need •to worry when measuring samples in the field

Minimum Detection limit: Dynamic Range Detector internal Datalogging

• Ammonium: 0.10µM • Extracted chlorophyll a: 0.50µgL • in vivo chlorophyll a: 0.30 µg/L• • Cyanobacteria: 150 cells/mL• • Rhodamine WT: 0.4ppb • Fluoresein: 0.4ppb • Turbidity: 0.5 NTU 3 orders of magnitude Photodiodes with measurement capability from 300 nm to 1,000 nm Up to 1,000 data points


ENV43

Global Flow Probe, Peek DCT 7088 and Marsh McBirney Flo-Mate 2000

Velocity and Flow Meters • Global Flow Probe Digital Water Velocity Meter

Marsh McBirney Flo-Mate 2000 Portable Flowmeter•Peek DCT 7088 Digital Correlation Transit • Time Flowmeter

The Global Flow Probe measures flow in open channels and partially filled pipes and is ideal for stormwater runoff studies. The probe can be placed directly on the bottom of the channel to measure flow to 1.5” in depth. The Marsh McBirney Flo-Mate 2000 features instantaneous readout of flow velocity which is ideal for calibrating flumes, weirs, streams, sewers or mining and irrigation canals. This instrument includes two user selectable data averaging features (fixed period averaging or time constant mode) and memory storage of up to 19 points. The Peek DCT 7088 is designed for clean liquid applications. This flowmeter tolerates high concentrations of entrained solids or gas bubbles and features bidirectional flow measurements. Its flexibility makes it appropriate for HVAC, potable water, ultrapure liquids, de-ionized water, petroleum products or water and waste management studies.

WATeR QUAliTy inSTRUMenTS


know more?

800-242-3910

ENV 44

Edgetech DewPrime Hygrometer Model 2002

Primary chilled mirror technique•NIST-traceable calibration•Also measures relative humidity•Continuous monitoring •

Dew/Frost Point FH Range Accuracy Depression Sample Pressure outputs Power

58°to +212°F 1 to 95% rH ±0.36%°F dew/frost point ±0.5% rH nominal 108°F 0 to 300psia 4 to 20ma, 0 to 5vDC, rS-232 115v

SPeCiAlTy inSTRUMenTS

Edgetech DewPrime Hygrometer Model 2002

Novalynx Model 110-WS-16 and Davis Vantage Pro2 Weather Station

Weather Stations Davis Vantage Pro2 •Novalynx Model 110-WS-16•

The Davis Vantage Pro2 provides forecasting, on screen graphing, radiation protected temperature and humidity sensors and datalogging.The Novalynx Model 110-WS-16 is a PC-based modular station that can measure weather conditions at user-selected intervals from one to 99 minutes. Real-time data can be viewed instantly on a laptop or up to 30 days of measurements can be logged.

DAViS VAnTAge PRo2 noVAlynx MoDel 110-WS-16

Weather information includes: inside/outside temperature, rainfall amount, humidity levels, wind speed, wind direction/wind chill factor, barometric pressure trend, heat index, dew point, time of sunrise and sunset, moon phase forecasting icons Wind speed, wind direction, temperature, relative humidity, barometric pressure, rainfall


ENV45

Engineering Solutions OMNIGUARD 4 Differential Pressure Recorder

Engineering Solutions OMNIGUARD 4 Differential Pressure Recorder

Not position sensitive: continuous measurements if •unit is movedIncludes built-in printer and software •

operating Ranges Resolution Accuracy Pressure Calibration burst Pressure Datalogging Alarms

±/-0.250” Water Column ( -6.35mm WC, +/-62.5 Pascals) 0.001 inches Water Column (+/-0.05mm WC, +/-0.5 Pascals) +/-0.003 inches Water Column or +-1% of reading whichever is greater “WC (inches Water Column), mmWC Zero Cal function, temperature compensated 3psi 128,000 character, 30+ days of readings (over 4000 logged events) two programmable alarm set points, 95db audible alarm with flashing lED and on-screen warning indicate alarm condition


Landtec GEM 500 and GEM 2000

Landtec GEM Landfill Gas Monitors

GEM 2000 and GEM 2000 Plus•GEM 500 •

The GEM 2000 and 2000 Plus were designed to monitor landfill gas extraction systems, flares and migration control systems by sampling and analyzing the methane, carbon dioxide and oxygen content of landfill gas (the plus model also monitors CO and H2S). These intrinsically safe instruments measure gas flow rate, BTU content, relative and atmospheric pressures and CH4 LEL. The GEM 500 is used to monitor landfill gas (LFG) migration control systems, gas extraction systems, flares, migration probes, LEL levels and subsurface lines. Measurements are gathered by a self-compensating infrared gas analyzer and an internal sample pump.

geM 2000, 2000 PlUS methane Carbon Dioxide oxygen Carbon monoxide* Hydrogen Sulfide* geM 500 methane Carbon Dioxide oxygen

Sensor Range Resolution 0 to 100% 0.1% 0 to 60% 0.1% 0 to 25% 0.1% 0 to 2000ppm 0.1% 0 to 200ppm 0.1% 0 to 70% 0.1% 0 to 50% 0.1% 0 to 25% 0.1%

800-242-3910

ENV 46

AMS Basic Soil Kit This kit gives you the ability to auger in most •materials up to 12’ and then collect a soil core sample

Tools included in the kit

1 regular auger 1 mud auger 1 Sand auger 1 rubber Coated Cross Handle 1 2” x 6” Core Sampler* 1 1/2” x 6 1 Slide Hammer 1 amS 2” x 12” nylon Brush 2 Crescent Wrenches 1 Universal Slip Wrench 1 amS Deluxe Poly reinforced Case 3 4’ Extensions *Patent Pending, USa & Foreign

TSI PortaCount Plus Fit Tester Model 8020 and N95-Companion Kit

AMS Basic Soil Kit

Generators Honda 2000I•Multiquip 3600•

Power anything with our generators from Honda and Multiquip. Please ask about other available models and power ranges.

Multiquip 3600 Generator

TSI PortaCount Plus Fit Tester Model 8020 and N95-Companion Kit

Quantitative fit tester•OSHA-accepted for all fit testing regulations•Includes software and optional printer available•N-95 Companion kit rents separately•

Fit Factor Range Concentration Range Particle Size Range Fit Factor Accuracy output Compatible With:

1 to greater than 10,000 0.01 to 5 x 105 particles/cm³ 0.02 to greater than 1µm ±10% of reading rS-232 port almost any respirator, including elastometric half and full-face mask, PaPrs, Scba and Class-100 and Class-99 disposable (filter face-piece) respirators


800 242 3910 / www.ashtead-technology.com

ISO 9001 Certified

Documents

Ashtead Technology - Instrument Rental Guide - Environmental Section