Embed Size (px)
Citation preview
Assembly instructions front covering lip & diffuser
Porsche 718 Cayman GT4 Clubsport MR
3
718 Cayman GT4 Clubsport MR assembly instructions
Notice
Dear customer, The following pages describe the assembly of the natural fiber components "bumper lip" and "diffuser". For transport, these components were only added to the vehicle and not mounted during final completion. Please read and follow the described steps carefully!
Contact Manthey-Racing GmbH Rudolf-Diesel-Str. 11-13 53520 Meuspath Telefon: +49 2691 9338 807 E-mail: [email protected]
5
718 Cayman GT4 Clubsport MR assembly instructions
Warning and safety instructions The classification of the warning or safety information is carried out by the respecti-ve signal word (danger, warning, caution) next to the warning symbol.
Warning of death or serious injury that will occur if not ob-served.
Warning of death or serious injury that could result if disre-garded.
Warning of minor injuries if not observed.
Warning of damage to property in case of non-compliance.
Specific Tightening torque in Nm.
NOTE
DANGER
WARNING
ATTENTION
6
718 Cayman GT4 Clubsport MR assembly instructions
Item Bezeichnung / Description M A. Teile Nr. / Part no.
1 BUGLIPPE NATURFASER SPOILER NATURAL FIBRE
1 MTH810160
2 SCHRAUBE M5X12 SCREW M5X12
6 999073268A2
The vehicle is provided with the front covering lip (Item 1) and the specific fas-tening screws (Item 2). For fixing, only the screws specified are permitted!
Assembly of the front covering lip
1
2
The components are to be checked before installation and after assembly to the ve-hicle for compliance with the valid current homologation dimensions and specifica-tions. This check for compliance is the responsi-bility of the competitor!
NOTE
NOTE
7
718 Cayman GT4 Clubsport MR assembly instructions
Step 1:
Step 1:
Attach the natural fibre lip to the front covering Observe the correct orientation from the lip to the front covering. Step 2:
Attach the lip with the supplied M5x12 screws at the shown positions.
Step 2:
6 Nm
It is recommended to dismantle the natu-ral fibre lip for the transport of the vehicle.
NOTE
8
718 Cayman GT4 Clubsport MR assembly instructions
The diffuser (item 1), the two strakes (item 2, item 3) and the fixing screws (item 5) are enclosed with the vehicle. The sheet metal nuts (item 4) have already been fitted to the vehicle as part of the vehicle's completion. Only the screws and nuts specified here are permitted for attachment!
Assembly of the diffuser
Item Bezeichnung / Description M A. Teile Nr. / Part no.
1 DIFFUSOR NATURFASER DIFFUSER NATURAL FIBRE
1 MTH811080
2 FINNE DIFFUSOR LINKS STRAKE DIFFUSER LEFT
1 MTH811081
3 FINNE DIFFUSOR RECHTS STRAKE DIFFUSER RIGHT
1 MTH811082
4 BLECHMUTTER M5 SHEET NUT M5
4 MR003398
5 LINSENKOPFSCHRAUBE M5X12 PAN HEAD SCREW M5X12
8 999073295A2
1
2
3
4
5
The illustration shows the positions of the already pre-assembled sheet metal nuts (item 4) in the rear underbody area.
The components are to be checked before installation and after assembly to the ve-hicle for compliance with the valid current homologation dimensions and specifica-tions. This check for compliance is the responsi-bility of the competitor!
NOTE
NOTE
9
718 Cayman GT4 Clubsport MR assembly instructions
6 Nm
Step 1:
Step 1:
Place the diffuser (item 1) in the position indicated on the rear subfloor. Pay attention to the correct orientation of the diffuser. As an indication serves the transition of the diffuser to the rear covering. Attach the diffuser to the positions shown with four M5x12 mounting screws (item 5).
10
718 Cayman GT4 Clubsport MR assembly instructions
It is recommended to dismantle the natu-ral fibre diffuser for the transport of the vehicle.
6 Nm
Step 2:
Step 2:
Mount the two strakes (item 2 and item 3) with two fixing screws each (item 5) to the diffuser mounted in step 1.
The strakes are page related! Part number strake left: MTH811081 Part number strake right: MTH811082 A reversed installation of the strakes does not correspond to the homologation! Only the fastening screws (item 5) spe-cified here are permitted!
MTH811081 MTH811082 NOTE
NOTE
