Upload
dodiep
View
244
Download
5
Embed Size (px)
Citation preview
ISSUE 11.1
AUGER SPECIFICATIONS
www.augertorque.com.au
AUGER TORQUE AUSTRALIA PTY LTD
Innovation
Featureswww.augertorque.com.au2
PilotsTOUGHNESS
Earth, Tungsten, Extra Dig and Rock Pilots
Tough forged construction Easy fi tting
Pilot ExtensionsACCURACY
Allows an auger to hold its axis accurately in tough ground conditions
Improves performance on sloping ground
Simple fi tting
UNIQUE
Shallow Pitch FlightsEFFICIENCY
Piling industry technology Holds earth on fl ights on removal
Most effi cient ratio between quantity of earth removed and speed of operation
“Don’t leave your teeth
down the hole!”Patented Design
Tooth Locking SystemSIMPLE, SAFE & SECURE
Unique to Auger Torque Lessens shock vibration Prolongs tooth life Avoids tooth loss Allows fast replacement Reliable technology with 100% customer satisfaction
International Patents: British Patent: 2404935
European Patent: 1507061
German Patent: 60 2004 009 250-9
Australian Patent: 2004203825
Canadian Patent: 2478443
US Patent: 7383901
Telescopic ExtensionsADAPTABILITY
Improves effi ciency for deep hole drilling
Innovative design signifi cantly reduces swap-over time
Easy adjustment to 3 heights Available for S5, S6 and PA augers
Constant Spiral CutIMPROVED PRODUCTIVITY
Fresh cut every revolution Tooth holders angled to direct spoil onto auger fl ights effi ciently
Spoil broken up thoroughly Avoids clogging
Interchangeable Wear PartsFLEXIBILITY
Shock LockTM Augers feature Tooth Holders which can take both earth and Tungsten Teeth.
Interchangeable pilots allow for differing ground conditions
Tooth Locking System
dPatented
3
Earth Drill 1200
100mm
All F
ully
Fligh
ted
150mm 200mm 225mm 250mm 300mm
Over
all L
engt
h 0.
9M
WEAR PARTS FOR GROUND CONDITIONS
EARTH (Shock LockTM)Best suited to soft grounds like earth and clay.
HUB OPTIONS
S2 AUGERS With our patented Shock Lock™ Tooth Locking System tooth loss is now a thing of the past. Using the Shock Lock™ pin and rubber in our unique Shock Lock™ tooth holders ensures your Auger teeth are safely locked in place and protected against shock fractures.
Replacing worn teeth is a breeze with this system, simply knock out the old pin with a standard hole punch and the tooth will slide out of the holder with ease. Acclaimed as the best system on the market you will never need to worry about fi tting spare teeth due to losing them again.
UNIQUE
DON’T LEAVE YOUR TEETH DOWN THE HOLE!
Tooth Locking System
50mm Round
StihlAttchments
S2/4 Shock LockTM
Earth Tooth33-9121-KIT
S2/4 Earth Pilot33-9203-KIT
S1/2/4 Shock LockTM
Tooth Holder33-1010
Pin & Clip50 Round 42-1055-KIT
EARTH WEAR PARTS EXTRAS
MICRO EXCAVATORS 0.75 - 1 T
Full technical details of the Earth Drills can be found in the Earth Drill Specifi cations book.
www.augertorque.com.au4
With our patented Shock Lock™ Tooth Locking System tooth loss is now a thing of the past. Using the Shock Lock™ pin and rubber insert in our unique Shock Lock™ tooth holders ensures your Auger teeth are safely locked in place and protected against shock fractures.
Replacing worn teeth is a breeze with this system, simply knock out the old pin with a standard hole punch and the tooth will slide out of the holder with ease. Acclaimed as the best system on the market you will never need to worry about fi tting spare teeth due to loss again.
S4 AUGERS
Earth Drill X2000
Earth Drill ML2000
Earth Drill X1500
Earth Drill ML1500
Earth Drill X2500
Earth Drill ML2500
Earth Drill 4500MAX
Earth Drill 3000MAX
Earth Drill 3000TC
100mm
Fully
Flig
hted
950
mm
780m
m
750m
m
750m
m
700m
m
700m
m
675m
m
150mm 200mm 225mm 250mm 300mm 350mm 375mm 400mm 450mm 500mm 550mm 600mm
675m
m
625m
m
625m
m
625m
m
600m
m
600m
m
Over
all L
engt
h 1.2
M
UNIQUEDON’T LEAVE YOUR TEETH DOWN THE HOLE!
Tooth Locking System
HUB OPTIONS
2” / 50mm Hex65mm Round
57mm Square
MINI EXCAVATORS 1 - 5 T, MINI LOADERS,SKIDSTEER LOADERS UP TO 80HP ANDTRUCK CRANES UP TO 9 T / METRE
Full technical details of the Earth Drills can be found in the Earth Drill Specifi cations book.
Earth Drill 3500MAX
5
WEAR PARTS REQUIRED
FOR GROUND CONDITIONS
EARTH (Shock LockTM)Best suited to soft grounds like earth and clay.
FLAT TUNGSTEN (Shock LockTM)Best suited to soft abrasive grounds like sand, to help reduce wear.
FLAT TUNGSTEN CHISEL (Shock LockTM)Used in conjunction with standard full width Flat Tungsten Teeth. Improves cutting where low down pressure machines are being used, i.e. Mini Loaders, small Skid Steer Loaders & small Excavators. Must only be fi tted to the inside tooth holders with standard full width Flat Tungsten Teeth being fi tted on the outer most holders.
TUNGSTEN (Shock LockTM)Best used in dry, hard or medium ground conditions where fl oating rocks may be encountered. The perfect all-rounder if you are not sure about what you might encounter.
TUNGSTEN CHISEL (Shock LockTM)Used in conjunction with standard full width Tungsten Teeth. Improves cutting where low down pressure machines are being used, i.e. Mini Loaders, small Skid Steer Loaders & small Excavators. Must only be fi tted to the inside tooth holders with standard full width Tungsten Teeth being fi tted on the outer most holders.
EXTRA DIG PILOTA stronger Pilot for more demanding ground conditions.
800mm750mm700mm 900mm
525m
m
525m
m
525m
m
525m
m
500m
m
800m
m
1M
1.2M
S4 EXTENSIONS
All the Augers above are shown with
Shock LockTM Tooth Holders.
* Overall Length given includes the
auger fi tted with wear parts.
S2/4 Shock LockTM
Earth Tooth33-9121-KIT
S2/4 Earth Pilot33-9203-KIT
S4 Shock LockTM
Flat Tungsten Tooth33-9124-KIT
S4 Shock LockTM
Flat Tungsten Chisel33-9123-KIT
S4 Shock LockTM
Tungsten Tooth33-9122-KIT
S4 Shock LockTM
Tungsten Chisel33-9125-KIT
S4 Tungsten Pilot33-9204-KIT
S4Flat Tungsten Pilot33-9222-KIT
S1/2/4 Shock LockTM
Tooth Holder33-1010
Pin & Clip65 Round 30-0004-KIT
S4 Extra Dig Pilot33-9212-KIT
S4 Pilot Extension33-4106-KIT
S4 Drive Lugs33-4102 33-410533-4110
EARTH WEAR PARTS TUNGSTEN WEAR PARTS EXTRAS
Pin & Clip2” Hex 30-0003-KIT
1080
mm
977m
m
975m
m
965m
m
900m
m
900m
m
150mm 200mm 225mm 250mm 300mm 350mm 375mm 400mm 450mm 500mm 550mm
900m
m
875m
m
750m
m
750m
m
750m
m
Over
all L
engt
h 1.5
m*
600mm
750m
m
75mm Square
2.5” / 63.5mm Hex
HUB OPTIONS
S5 AUGERS
Earth Drill 5000
Earth Drill 5500MAX
Earth Drill 8000MAX
Earth Drill 7000
Earth Drill 7000MAX
Earth Drill 7000TC
Earth Drill 5000TC
www.augertorque.com.au6Full technical details of the Earth Drills can be found in the Earth Drill Specifi cations book.
EXCAVATORS FROM 4.5 - 8 T, TELEHANDLERS, HIGH FLOW SKIDSTEER LOADERS, BACKHOES AND TRUCK CRANES FROM 9 - 18 T / METRE
With our patented Shock Lock™ Tooth Locking System tooth loss is now a thing of the past. Using the Shock Lock™ pin and rubber insert in our unique Shock Lock™ tooth holders ensures your Auger teeth are safely locked in place and protected against shock fractures.
Replacing worn teeth is a breeze with this system, simply knock out the old pin with a standard hole punch and the tooth will slide out of the holder with ease. Acclaimed as the best system on the market you will never need to worry about fi tting spare teeth due to loss again.
UNIQUEDON’T LEAVE YOUR TEETH DOWN THE HOLE!
Tooth Locking System
800mm750mm700mm 900mm 1M 1.2M
700m
m
700m
m
700m
m
700m
m
525m
m
525m
m
S5 EXTENSIONS
S5 TELESCOPIC
WEAR PARTS REQUIRED
FOR GROUND CONDITIONS
EARTH (Shock LockTM)Best suited to soft grounds like earth and clay.TUNGSTEN (Shock LockTM)Best used in dry, hard or medium ground conditions where fl oating rocks may be encountered. The perfect all-rounder if you are not sure about what you might encounter.ROCK (Taper Lock)For very hard ground and tarmac where extra cutting is needed and high wear is expected. Most effective on machines with high down pressure.
S5/6 Shock LockTM
Earth Tooth33-9126-KIT
S5/6 Earth Pilot33-9205-KIT
S5/6 Shock LockTM
Tungsten Tooth33-9127-KIT
S5/6 Rock Tooth33-9107
S5/6 Tungsten Pilot33-9206-KIT
S5/6 Shock LockTM
Tooth Holder33-1011
Pin & Clip57/75 Square 30-0002-KIT
S5/6 Rock Pilot33-9207-KIT
S5/6 Rock Tooth Holder33-1013
S5/6 Drive Socket1 3/4” Hex33-4103
EARTH WEAR PARTS ROCK WEAR PARTSTUNGSTEN WEAR PARTS EXTRAS
1M
1.5M
2M
1.5M
2M
7
All the Augers above are
shown with Shock LockTM Tooth
Holders. Rock Teeth require a
Rock Tooth version of the Auger.
* Overall Length given includes
the auger fi tted with wear parts.
For Augers over 1M diameter please call our sales offi ce for further information.
Augers over 1M - special order up to 1.2M
875m
m
900m
m
1000
mm
700mm
1320
mm
1200
mm
1203
mm
1225
mm
1200
mm
1125
mm
150mm 200mm 225mm 250mm 300mm 350mm 375mm 400mm 450mm 500mm 600mm
1125
mm
1000
mm
1000
mm
Over
all L
engt
h 1.8
8M*
S6 AUGERS
Earth Drill 10 000
Earth Drill 25 000MAX
Earth Drill 12 000
Earth Drill 12 000MAX
Earth Drill 17 000MAX
HUB OPTIONS
75mm Square
Earth Drill 15 000
Earth Drill 15 000MAX
Earth Drill 20 000MAX
www.augertorque.com.au8Full technical details of the Earth Drills can be found in the Earth Drill Specifi cations book.
With our patented Shock Lock™ Tooth Locking System tooth loss is now a thing of the past. Using the Shock Lock™ pin and rubber insert in our unique Shock Lock™ tooth holders ensures your Auger teeth are safely locked in place and protected against shock fractures.
Replacing worn teeth is a breeze with this system, simply knock out the old pin with a standard hole punch and the tooth will slide out of the holder with ease. Acclaimed as the best system on the market you will never need to worry about fi tting spare teeth due to loss again.
UNIQUEDON’T LEAVE YOUR TEETH DOWN THE HOLE!
Tooth Locking SystemEXCAVATORS & BACKHOES FROM 8 - 22 T
875m
m
800mm750mm 900mm 1M 1.2M 1.5M
700m
m
600m
mAugers of a larger diameter and
length can be manufactured for
use with these Earth Drills, but
technical advice is required.
Call one of our main offi ces for
more details.
S5/6 Shock LockTM
Earth Tooth33-9126-KIT
S5/6 Earth Pilot33-9205-KIT
S5/6 Shock LockTM
Tungsten Tooth33-9127-KIT
S5/6 Rock Tooth33-9107
S5/6 Tungsten Pilot33-9206-KIT
S5/6 Shock LockTM
Tooth Holder33-1011
Pin & Clip57/75 Square 30-0002-KIT
S5/6 Rock Pilot33-9207-KIT
S5/6 Rock Tooth Holder33-1013
S5/6 Drive Socket1 3/4” Hex33-4103
EARTH WEAR PARTS ROCK WEAR PARTSTUNGSTEN WEAR PARTS EXTRAS
All the Augers above are shown
with Shock LockTM Tooth Holders.
Rock Teeth require a Rock Tooth
version of the Auger.
* Overall Length given includes the
auger fi tted with wear parts.
9
EARTH (Shock LockTM)Best suited to soft grounds like earth and clay.
WEAR PARTS FOR GROUND CONDITIONS
TUNGSTEN (Shock LockTM)Best used in dry, hard or medium ground conditions where fl oating rocks may be encountered. The perfect all-rounder if you are not sure about what you might encounter.
S6 EXTENSIONS
S6 TELESCOPIC
1.5M
2M
1.5M
2M
2.5M
3M
ROCK (Taper Lock)For very hard ground and tarmac where extra cutting is needed and high wear is expected. Most effective on machines with high down pressure.
PA Augers are available
in 2.3 metre or 3.3 metre
lengths as standard -
Please specify when
ordering
800mm750mm700mm 900mm
Fully
Flig
hted
1558
mm
1527
mm
300mm 350mm 400mm 450mm 500mm 600mm
1446
mm
1446
mm
1446
mm
1433
mm
1321
mm
1321
mm
1321
mm
1321
mm
Over
all L
engt
h 2.
3M /
3.3M
*
www.augertorque.com.au10
PA AUGERS The PA Range of Augers are the most heavy-duty units available and are available in 2.3 metre and 3.3 metre lengths as standard. Fully fl ighted versions are available also.
Our standard PA Auger range has a maximum diameter of 1.5m however Augers with a diameter of up to 2.4m can be manufactured on request. Contact our sales offi ce for further information.
HUB OPTIONS
100mm Square and 130mm Square options are also available.
110mm Square
EXCAVATORS 17 - 45 T
Full technical details of the Earth Drills can be found in the Earth Drill Specifi cations book.
Earth Drill 30 000
Earth Drill 30 000MAX
Earth Drill 35 000MAX
Earth Drill 42 000MAX
Earth Drill 40 000 (Augers start from 700mm Diameter)
Earth Drill 50 000MAX
1M 1.2M 1.5M
971m
m
908m
m
750m
m
PA EXTENSIONS PA TELESCOPIC
2M
3M
2M
3M
11
PA Earth Tooth33-9108
PA RockTooth Holder33-1012
PA Rock Tooth33-9109
EARTH WEAR PARTS EXTRASROCK WEAR PARTS
PA Earth Pilot33-9208-KIT
PA Drive Socket33-4104
33-9209-1
33-9209-3
33-9209-2PA Rock Pilot33-9209-KIT
Pin & Clip110 Square 23-3900-KIT
LARGER AUGERSAugers of a larger
diameter and length can
be manufactured for use
with these Earth Drills, but
technical advice is required.
Call one of our main offi ces
for more details.
* Overall Length given includes the auger fi tted with wear parts.
For Augers over 1.5 metres diameter please call one of our main offi ces for further information.
The PA Rock Pilot can be purchased in separate sections or as a whole assembly when buying replacement parts.
Augers over 1.5m - special order up to 2.4m
Augers over 1.5m - special order up to 2.2m
Augers over 1.5m - special order up to 1.8m
WEAR PARTS FOR GROUND CONDITIONS
EARTH (Taper Lock)Best suited to soft grounds like earth and clay.ROCK (Taper Lock)For very hard ground and tarmac where extra cutting is needed and high wear is expected. Most effective on machines with high down pressure.
TAHITI
NINGBO
BRISBANE
MELBOURNE
CHELTENHAM
FORT WAYNE
SYDNEY
YOUR NEAREST DEALER IS
Products and specifications subject to change without prior notice.
Some products may not be available in your country or region.
AUGER TORQUE, SHOCK LOCK™, NDS™ and the AUGER TORQUE LOGO are trademarks of Auger Torque Australia Pyt Ltd © 2013 Auger Torque Australia Pyt Ltd. All Rights Reserved.
Auger Torque Australasia / Pacific Region
Auger Torque Australia Pty LtdBrisbane - Australia
Tel: +61 (0)7 3274 2077 Fax: +61 (0)7 3274 5077Email: [email protected]
16071499-97111