8
Auxiliary HVAC | RAM ProMaster ® Standard Tie-in n Extreme Climate System

Auxiliary HVAC | RAM ProMaster - Webasto · PDF fileLondon HVAC Unit Air distributor with orbital directional vents is standard. Other ducting options are available. System tie-in

  • Upload
    lethuy

  • View
    216

  • Download
    1

Embed Size (px)

Citation preview

Page 1: Auxiliary HVAC | RAM ProMaster - Webasto · PDF fileLondon HVAC Unit Air distributor with orbital directional vents is standard. Other ducting options are available. System tie-in

Auxiliary HVAC | RAM ProMaster®

Standard Tie-in n Extreme Climate System

Page 2: Auxiliary HVAC | RAM ProMaster - Webasto · PDF fileLondon HVAC Unit Air distributor with orbital directional vents is standard. Other ducting options are available. System tie-in

2

High performance aftermarket heating and cooling systems engineered for vehicle specific platforms that minimize install time and maximize reliability.

Auxiliary HVAC

Page 3: Auxiliary HVAC | RAM ProMaster - Webasto · PDF fileLondon HVAC Unit Air distributor with orbital directional vents is standard. Other ducting options are available. System tie-in

Mobile + Online Customer Support

Mobile + Online Supportn Mobile Dealer Locator available for iOS and Android devicesn webasto.com - interactive website featuring product brochures and informationn techwebasto.com - training and technical documentationn webastoliterature.com - order the latest brochures/catalogs

3

Page 4: Auxiliary HVAC | RAM ProMaster - Webasto · PDF fileLondon HVAC Unit Air distributor with orbital directional vents is standard. Other ducting options are available. System tie-in

London HVAC Unit

Air distributor with orbital directional vents is standard. Other ducting options are available.

System tie-in with Webasto

refrigerant T-Block

4

The London is a low profile, rear heating and cooling unit that packages into the driver‘s

overhead compartment designed to deliver conditioned air rearward into the cargo space.

The placement of the London offers convenience as well as minimal refrigerant, coolant and

condensate drain plumbing and wire harness routing.

Standard Tie-in HVAC | London

Page 5: Auxiliary HVAC | RAM ProMaster - Webasto · PDF fileLondon HVAC Unit Air distributor with orbital directional vents is standard. Other ducting options are available. System tie-in

Controller with on/off switch, variable fan speed and variable temperature control is standard. The controller is packaged in-dash, or can be located anywhere inside the vehicle.

Control Unit

5

Specifications London

Color Black

Cooling Capacity 32,500 BTU/h (9.5 kW)

Heating Performance 44,500 BTU/h (13.0 kW)

Refrigerant R134A

Nominal Voltage 12V

Max. Power Consumption @ 12V 21 A

Max. Air Flow Evaporator Blower 471 cfm (800 m3/h)

Dimensions L x W x H 21.7 x 15.7 x 7.1 in (550 x 400 x 180 mm)

Weight 17 lbs (7.7 kg)

Product Features:n High capacity horizontal

heating and cooling unitn Low profile for minimal space

limitationsn 12 Volt (or 24 Volt models

available upon request)n Variable temperature controln Hot water heating and cooling

functionsn Operation from one single

controller

Vehicle Integration - CoolingThe London HVAC is tied into the Ram ProMaster® OEM front HVAC for cooling and utilizes the vehicle‘s existing

in-line condenser and compressor. ProMasters have optional factory rear A/C prep kits that allow for easy

integration with the factory front HVAC. Webasto kits are also available for ProMaster® vehicles that are not

equipped with A/C prep option.

Standard Tie-in HVAC | London

Vehicle Integration - HeatingHeating is achieved by plumbing the London‘s hot water heater core to the vehicle‘s engine coolant loop. Hot

water flow is controlled by Webasto hot water valve and auxiliary pump.

Page 6: Auxiliary HVAC | RAM ProMaster - Webasto · PDF fileLondon HVAC Unit Air distributor with orbital directional vents is standard. Other ducting options are available. System tie-in

6

High-performance, twin-fan, Capri Condenser is lightweight with low noise operation

For applications that require maximum cooling capacity, the Extreme Climate Stand Alone

HVAC shares the same components as the Standard Tie-in Rear HVAC system (London), with

the addition of an auxiliary engine driven compressor, compressor mount kit and a roof

mounted/low-profile condenser (Capri).

Extreme Climate Stand Alone HVAC | Capri

Need More Cool?

Auxiliary Compressor

Optional ModulAir ducting system for optimal air distribution

Page 7: Auxiliary HVAC | RAM ProMaster - Webasto · PDF fileLondon HVAC Unit Air distributor with orbital directional vents is standard. Other ducting options are available. System tie-in

7

Specifications Capri

Color White

Performance 35,800 BTU/h (10.5 kW)

Nominal Voltage 12V

Max. Power Consumption @ 12V 18 A

Dimensions L x W x H 32 x 23.6 x 5.9”

Weight 26.5 lbs (12 kg)

Product Features:n Less than 6-inches highn Low profile for minimal space

limitationsn Twin electric fan condensern Lightweight

Vehicle Integration - CoolingLondon Rear HVAC is integrated with an independent refrigerant loop consisting of auxiliary compressor and Capri

condenser. For minimal install time and plumping routing, the Capri condenser can be mounted directly above the

London Rear HVAC system on the roof of the vehicle. Under chassis mount condensers are also available.

Extreme Climate Stand Alone Rear HVAC | Capri

Vehicle Integration - HeatingHeating integration and function is identical to Standard Tie-in Rear HVAC.

Additional HVAC Configurations | Ibiza Vertical Unit

31,000 BTU/h | 471 cfm

Page 8: Auxiliary HVAC | RAM ProMaster - Webasto · PDF fileLondon HVAC Unit Air distributor with orbital directional vents is standard. Other ducting options are available. System tie-in

webasto.com

Webasto Thermo & Comfort North America, Inc.

15083 North Road

Fenton, Michigan 48430

USA

Toll Free: 800-860-7866

Phone: 810-593-6000

Email: [email protected]

Optional low-profile (less than 2“) Webasto ModulAir, ceiling mount air ducting kit - connects to the Standard

Tie-in Rear HVAC (London) for evenly distributed air delivery. The kit is available in black or gray and sections can

be ordered individually for optimal lengths.

Universal Ducting | ModulAir

Auxiliary HVAC Kits | Ram ProMaster®

Standard Tie-in HVAC Kit n London HVAC Unitn A/C Plumbingn Hot Water Plumbing

Extreme Climate Kit

n London HVAC Unitn Capri Condensern A/C Plumbingn Hot Water Plumbing

Compressor + Mount Kitn Compressorn Mounting Hardware

ModulAir Duct Kitn Black or Greyn 4-Piece Setn Optional

n Harnessesn Controllern Brackets

n Harnessesn Controllern Brackets

Optional Accessories | Ducting + Kits