Ball Valves - tidyco.co.uk Valves... · Ball Valves Degreased Ball Valves, Brass High quality 2 piece full bore ball valve with full thread, degreased for oxygen. Valves supplied

685

Sec

tio

n 7

– Va

lves

Tools, Hardware& PPE

Air Tools

Wash Down & Fuelling

Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips

Hose, Tubing & Couplings

MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves

Pneumatic & Vacuum Equipment

KELM™Pneumatics

Ind. Air Prep., Monitor & Test

PneumaticQRC

HydraulicQRC

Hydraulics

Ball Valves

Red Steel Long Handle

• Full Bore • Long Thread

• Flat Steel Handle • Seal Material PTFE

Temperature Range:-15°C to +120°C

Working Pressure:25 bar

Female x Female, BSPP

0109

2023-0439 1/4” 7.702023-0447 3/8” 7.702023-0454 1/2” 8.552023-0462 3/4” 12.252023-0470 1” 18.602023-0488 1.1/4” 28.752023-0496 1.1/2” 45.052023-0504 2” 70.002023-0512 2.1/2” 131.852023-0520 3” 202.202023-0538 4” 344.90

Tech Sheet 790

Tech Sheet 790

Tech Sheet 790

Male x Female, BSPP

0109

2024-1808 1/4” 7.902024-1816 3/8” 7.902024-1824 1/2” 8.552024-1832 3/4” 12.552024-1840 1” 18.702024-1857 1.1/4” 30.302024-1865 1.1/2” 45.952024-1873 2” 72.05

Blue Steel Long Handle


0109

2042-5336 1/4” 7.702042-5337 3/8” 7.702042-5338 1/2” 7.902042-5339 3/4” 12.252042-5340 1” 18.602042-5341 1.1/4” 28.752042-5342 1.1/2” 45.052042-5343 2” 68.602042-5344 2.1/2” 131.852042-5345 3” 202.202042-5346 4” 344.90

Male x Female, BSPP

0109

2064-7889 1/4” 7.902064-7897 3/8” 7.902064-7905 1/2” 8.552064-7913 3/4” 12.552064-7921 1” 17.752064-7939 1.1/4” 29.052064-7947 1.1/2” 33.252064-7954 2” 61.75

Green Steel Long Handle


0109

2046-1695 1/4” 7.702046-1703 3/8” 7.702046-1711 1/2” 8.552046-1729 3/4” 12.252046-1737 1” 18.602046-1745 1.1/4” 28.752046-1752 1.1/2” 43.352046-1760 2” 70.002046-1778 2.1/2” 131.852046-1786 3” 202.202046-1794 4” 344.90

Male x Female, BSPP

0109

2064-7962 1/4” 7.902064-7970 3/8” 7.902064-7988 1/2” 8.552064-7996 3/4” 12.552064-8002 1” 17.75

Tech Sheet 837

Tech Sheet 837

Tech Sheet 837

07 Valves-1.indd 685 16/02/2015 09:05

686


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Sec

tio

n 7

– Va

lves

Ball Valves

Mini Ball Valves, Brass• Polished Chrome Finish• Seal Material PTFE


Working Pressure:120 psi (8 bar)

Tech Sheet 834

Type MBV, Female x Female, Black Lever Handle, BSPP

0090

MBV18S 1/8” 5.45MBV14S 1/4” 6.00MBV38S 3/8” 5.65MBV12S 1/2” 8.50MBV34S 3/4” 12.50

• Polished Chrome Finish• Seal Material PTFE

Type MBVM, Male x Female, Black Lever Handle, BSPP

0090

MBVM18S 1/8” 5.25MBVM14S 1/4” 5.25MBVM38S 3/8” 5.55MBVM12S 1/2” 7.70MBVM34S 3/4” 9.70

Type MBV, Female x Female, Red Lever Handle, BSPP

0090

MBV18 1/8” 5.45MBV14 1/4” 6.00MBV38 3/8” 5.65MBV12 1/2” 8.50MBV34 3/4” 12.50

Type MBVM, Male x Female, Red Lever Handle, BSPP

0090

MBVM18 1/8” 5.25MBVM14 1/4” 5.25MBVM38 3/8” 5.55MBVM12 1/2” 7.70MBVM34 3/4” 9.70

Red T Handle• Full Bore• Long Thread• Seal Material PTFE



Tech Sheet 1763


0109

2024-1915 1/4” 8.002024-1923 3/8” 8.002024-1949 1/2” 8.902024-1964 3/4” 13.002024-1980 1” 18.60

Male x Female, BSPP

0109

2024-2079 1/4” 8.002024-2087 3/8” 8.002024-2095 1/2” 8.902024-2103 3/4” 13.002024-2111 1” 18.70

07 Valves-1.indd 686 16/02/2015 09:05

687

Sec

tio

n 7

– Va

lves


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Ball Valves

Degreased Ball Valves, BrassHigh quality 2 piece full bore ball valve with full thread, degreased for oxygen.Valves supplied individually bagged and heat sealed. • Body: Nickel Plated Brass/Handle Aluminium• Ball: Chromed Brass• Seals: PTFE• Stem Seal: NBR


Tech Sheet 2119

Female x Female, BSPT

0158

5940-14 1/4” 9.405940-38 3/8” 9.405940-12 1/2” 11.505940-34 3/4” 16.655940-1 1” 25.155940-114 1.1/4” 45.205940-112 1.1/2” 66.655940-2 2” 86.755940-212 2.1/2” 207.005940-3 3” 294.255940-4 4” 494.95

Light Model Brass Ball Valve, Red HandleLightweight, low pressure brass ball valve.

Suitable for domestic water services, heating, air-conditioning, & compressed air systems.

Available upto 4” on Request.

Working Temperature:-15°C to +120°C

Maximum Working Pressure:25 bar

Tech Sheet 10157


0109

LMBV-12 1/2” 7.70LMBV-34 3/4” 11.10LMBV-1 1” 17.25LMBV-114 1.1/4” 27.75LMBV-112 1.1/2” 42.20LMBV-2 2” 64.70

Full Flow Ball Valves, BrassTemperature Range:-15°C to +150°C

Tech Sheet 10023

Type BV90, Female x Female, Lever Handle, BSPP

0090

BV90-14 1/4” 7.90BV90-38 3/8” 7.90BV90-12 1/2” 8.55BV90-34 3/4” 13.25BV90-1 1” 20.00BV90-114 1.1/4” 33.15BV90-112 1.1/2” 49.35BV90-2 2” 77.55

ISO 5211 Pad, WRAS ApprovedFull BoreISO 5211 Direct Mount


Maximum Working Pressure:40 bar Tech Sheet

10291


0090

LV4500-12 1/2” 39.25LV4500-34 3/4” 50.55LV4500-1 1” 67.40LV4500-114 1.1/4” 112.70LV4500-112 1.1/2” 151.65LV4500-2 2” 224.70LV4500-212 2.1/2” 872.90

07 Valves-1.indd 687 16/02/2015 09:05

688


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Sec

tio

n 7

– Va

lves

Ball Valves

Lever Handles, Brass• Full bore• Nickel plated• BS EN331

• Full bore• Nickel plated• BS EN331

Page Tech Sheet 794

Pro-Fit - Red, Female x Female, BSPP

0230

EPS-101300 1/4” 8.45EPS-101305 3/8” 9.35EPS-101310 1/2” 10.45EPS-101315 3/4” 14.10EPS-101320 1” 24.05EPS-101325 1.1/4” 37.30EPS-101330 1.1/2” 51.90EPS-101335 2” 93.10EPS-101340 2.1/2” 226.15EPS-101345 3” 269.35EPS-101350 4” 465.55

Pro-Fit - Blue, Female x Female, BSPP

0230

EPS-101500 1/4” 8.45EPS-101505 3/8” 9.35EPS-101510 1/2” 10.25EPS-101515 3/4” 18.20EPS-101520 1” 24.05EPS-101525 1.1/4” 35.60EPS-101530 1.1/2” 49.85EPS-101535 2” 93.10EPS-101540 2.1/2” 226.15EPS-101550 4” 449.20

Pro-Fit - Yellow, Female x Female, BSPP

0230

EPS-101400 1/4” 8.45EPS-101405 3/8” 9.35EPS-101410 1/2” 10.45EPS-101415 3/4” 14.00EPS-101420 1” 24.05EPS-101425 1.1/4” 37.30EPS-101430 1.1/2” 49.85EPS-101435 2” 93.10EPS-101440 2.1/2” 226.15EPS-101445 3” 282.70EPS-101450 4” 449.20

Pro-Fit - Yellow, Female x Female, BSPT

0230

EPS-161510 1/2” 17.60EPS-161515 3/4” 24.75EPS-161520 1” 40.20EPS-161530 1.1/2” 87.30EPS-161535 2” 159.65

• Screwed BSPP Female x Female • Screwed BSPP Female x Female

Temperature Ranges:Gas: -5°C to +60°CWater/Oil: -5°C to +150°C


Working Pressure:Gas: 5 barWater/Oil: 20 bar


• Full bore• Nickel plated• BS EN331• Screwed BSPP Female x Female

• Taper threaded• Full bore• Nickel plated• BS EN331• Screwed BSPT Female x Female





07 Valves-1.indd 688 16/02/2015 09:05

689

Sec

tio

n 7

– Va

lves


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Ball Valves

Butterfl y Handles, Brass• Full bore• Nickel plated• BS EN331

• Screwed BSPP Female x Female • Full bore• Nickel plated• BS EN331

• Screwed BSPP Female x Female

Pro-Fit - Red, Female x Female, BSPP

0230

EPS-101600 1/4” 8.45EPS-101605 3/8” 7.25EPS-101610 1/2” 16.15EPS-101615 3/4” 14.80EPS-101620 1” 24.05


• Screwed BSPP Male x Female

Pro-Fit - Red, Male x Female, BSPP

0230

EPS-101625 1/4” 11.95EPS-101645 1” 24.05

Pro-Fit - Blue, Female x Female, BSPP

0230



• Screwed BSPP Female x Female

Pro-Fit - Yellow, Female x Female, BSPP

0230


Standard Lever Ball Valves

PN25, Red Handle, BSPP

0109

BVNA-14 1/4” 7.90BVNA-38 3/8” 10.55BVNA-12 1/2” 8.90BVNA-34 3/4” 11.85

0109

BVNA-1 1” 20.90BVNA-114 1.1/4” 28.50 BVNA-112 1.1/2” 42.70BVNA-2 2” 69.90

Page Tech Sheet 794









Temperature Range:Water/Oil: -5°C to +150°C

Working Pressure:Water/Oil: 20 bar

07 Valves-1.indd 689 16/02/2015 09:05

690


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Sec

tio

n 7

– Va

lves

Ball Valves

Compression Ball Valves, Brass, Lever Handles• Full bore• Nickel plated• BS EN331• Compression ended

• Full bore• Nickel plated• BS EN331• Compression ended



Page Tech Sheet 717

Pro-Comp - Red Lever

0230

EPS-102200 15 12.50EPS-102205 22 18.40EPS-102210 28 28.85EPS-102215 35 46.40EPS-102220 42 66.05EPS-102225 54 110.65

Pro-Comp - Yellow Lever

0230


Pro-Comp - Blue Lever

0230


Compression Ball Valves, Brass, Butterfl y Handles

Pro-Comp - Red Butterfl y

0230

EPS-102450 15 12.75EPS-102455 22 18.40EPS-102460 28 19.80

Pro-Comp - Yellow Butterfl y

0230

EPS-102420 15 12.40EPS-102425 22 18.90EPS-102430 28 19.80

Pro-Comp - Blue Butterfl y

0230

EPS-102470 15 13.30EPS-102475 22 18.00EPS-102480 28 19.80















07 Valves-1.indd 690 16/02/2015 09:05

691

Sec

tio

n 7

– Va

lves


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Ball Valves

Lockable, Gas Full Bore ValvesTemperature Ranges:Fluids:-20°C to +150°CGas:-20°C to +60°C

Working Pressure:25 bar (at 25°C)

BSPP

0090

2024-9553 1” 89 66.102024-9579 1.1/2” 114 169.452024-9587 2” 134 285.25

• Complete with 2 Keys.

Type BV76, Female x Female, Locking, BSPP

0090

BV76-12 1/2” 61 56 148.25BV76-34 3/4” 68 56 147.80BV76-1 1” 82 56 176.95

L L

H

Customers who bought from this page also purchased Brass Hose Tails– see page 817

Tech Sheet 10297

Tech Sheet 10296

07 Valves-1.indd 691 24/02/2015 14:54

692


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Sec

tio

n 7

– Va

lves

Ball Valves

Gas Mini Ball Valves, Brass

• Seal Material PTFE Temperature:-20°C to +80°C

Maximum Pressure:20 bar

Tech Sheet 1602

Tech Sheet 1602

Tech Sheet 1602

Tech Sheet 1602

Tech Sheet 1603

Tech Sheet 1604

Type 6300, Female x Female, BSPP

0090

6300-18 1/8” 1/8” 13.806300-14 1/4” 1/4” 12.756300-38 3/8” 3/8” 15.006300-12 1/2” 1/2” 19.00

Type 6310, BSPT Male x BSPP Female

0090

6310-18-18 1/8” 1/8” 13.806310-14-18 1/4” 1/8” 14.356310-14-14 1/4” 1/4” 14.356310-38-38 3/8” 3/8” 15.006310-12-12 1/2” 1/2” 19.006310-34-34 3/4” 3/4” 24.40

Type 6320, Male x Female, BSPP

0090

6320-18-18 1/8” 1/8” 10.956320-14-18 1/4” 1/8” 10.306320-14-14 1/4” 1/4” 14.356320-38-38 3/8” 3/8” 14.806320-12-12 1/2” 1/2” 19.00

Type 6330, Male x Male, BSPP

0090

6330-18-18 1/8” 1/8” 10.956330-18-14 1/8” 1/4” 10.956330-14-14 1/4” 1/4” 11.306330-12-12 1/2” 1/2” 13.00

Type 6340, Tube x Female, BSPP

0090

6340-6-18 6 1/8” 11.306340-8-18 8 1/8” 10.806340-8-14 8 1/4” 11.206340-10-38 10 3/8” 11.956340-15-12 15 1/2” 17.00

Type 6350, Male, BSPT x Tube

0090

6350-18-6 6 1/8” 10.606350-18-8 8 1/8” 11.056350-14-6 6 1/4” 14.356350-14-8 8 1/4” 14.806350-38-10 10 3/8” 11.656350-38-12 12 3/8” 11.756350-12-15 15 1/2” 20.90

Type 6420, Male x Male, BSPP

0090

6420-18-18 1/8” 1/8” 10.956420-18-14 1/8” 1/4” 10.306420-14-14 1/4” 1/4” 13.806420-38-14 3/8” 1/4” 13.806420-38-38 3/8” 3/8” 14.006420-12-12 1/2” 1/2” 17.60

Type 6440, Male BSPP x Tube

0090

6440-1/8-6 6 1/8” 10.656440-1/8-8 8 1/8” 10.706440-1/4-6 6 1/4” 10.556440-1/4-8 8 1/4” 11.306440-1/4-10 10 1/4” 10.956440-3/8-8 8 3/8” 10.306440-3/8-10 10 3/8” 11.206440-3/8-15 15 3/8” 12.456440-1/2-12 12 1/2” 11.656440-1/2-15 15 1/2” 19.806440-3/4-15 15 3/4” 16.25

Type 6500, Tube x Tube

0090

6500-8 8 23.20

Tech Sheet 1603

Tech Sheet 1603

Tech Sheet 1604

07 Valves-1.indd 692 16/02/2015 09:05

693

Sec

tio

n 7

– Va

lves


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Ball Valves

Mini Ball Valve Handles Tech Sheet

1606

Type 6910, Long Handle

0090

6910-A 35 0.906910-B 50 1.00

Mini Ball Valves, Brass Tech Sheet

1604

Type 6560, Push-in x Push-in

0090

6560-4 4 14.156560-6 6 20.006560-8 8 20.95

Type 6570, Push-in x BSPT

0090

6570-1/8-4 4 1/8” 15.706570-1/8-6 6 1/8” 16.156570-1/8-8 8 1/8” 13.406570-1/4-6 6 1/4” 17.756570-1/4-8 8 1/4” 14.35

Type 6700, L Port, BSPP

0090

6700-1/8 1/8” 29.456700-1/4 1/4” 30.106700-3/8 3/8” 33.05

Type 6710, T Port, BSPP

0090

6710-1/8 1/8” 22.056710-1/4 1/4” 30.106710-3/8 3/8” 24.50

Type 6720, Angle Port, BSPP

0090

6720-1/8 1/8” 26.556720-1/4 1/4” 27.256720-3/8 3/8” 29.95

Colour Coded Handle Inserts - Type 6920

For 1/8”, 1/4”, 3/8” Valves

0090

6920-A-B Blue 0.306920-A-G Green 0.306920-A-R Red 0.306920-A-W White 0.306920-A-Y Yellow 0.30

For 1/2”, 3/4” Valves

0090

6920-B-B Blue 0.306920-B-G Green 0.306920-B-R Red 0.306920-B-W White 0.306920-B-Y Yellow 0.30

L

Tech Sheet 1605

Tech Sheet 1605

Tech Sheet 1605

Tech Sheet 1605

For Brass Push-in Fittings see pages 884-888

07 Valves-1.indd 693 16/02/2015 09:05

694


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Sec

tio

n 7

– Va

lves

Valves

Compact Non-return Valves, BrassSeal Material NBR


Tech Sheet 1607

Push-in Non-return Valves

Pressure Rating:15 bar

Tech Sheet 1608

Push-in Non-return Valves

1020

6064-4 4 13.306064-6 6 15.556064-8 8 16.85

Quick Exhaust Valves, Brass Tech Sheet

552

Type 6062, Metric & BSPP

0090

6062-M5 M5 10.956062-18 1/8” 10.506062-14 1/4” 15.206062-38 3/8” 28.056062-12 1/2” 28.60

Type 6063, Male x Female, BSPP

0090

6063-18 1/8” 11.206063-14 1/4” 13.606063-38 3/8” 29.556063-12 1/2” 30.55

Type 6050, Metric & BSPP

0090

6050-M5 M5 8.556050-18 1/8” 13.606050-14 1/4” 16.756050-38 3/8” 20.206050-12 1/2” 28.056050-34 3/4” 36.55




Customers who bought from this page also purchased KELM™ Nylon Tubing – see page 577

Tech Sheet 1607

Maximum Working Pressure:115 PSI

Cracking Pressure:0.5 PSI



07 Valves-1.indd 694 16/02/2015 09:06

695

Sec

tio

n 7

– Va

lves


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Valves

Compact Non-return Valves



Ported Non-return Valves

Y Strainer, Brass• Mesh Size =1.5mm up to 2” valve

Temperature Range:0°C to +100°C

Strainers for YS Series Tech Sheet

2032

Stainless Steel AISI 304

0090

192-38-STRAINER YS-38 1.15192-12-STRAINER YS-12 1.15192-34-STRAINER YS-34 1.60192-1-STRAINER YS-1 1.75192-114-STRAINER YS-114 1.90192-112-STRAINER YS-112 2.30192-2-STRAINER YS-2 3.05192-212-STRAINER YS-212 10.20192-3-STRAINER YS-3 15.40192-4-STRAINER YS-4 29.15

Globe Valves - Gunmetal/Brass• BS 5154 PN 20 Series

B. Test Pressures (Hydraulic): Shell 30 bar. Seat 22 bar.

Tech Sheet 2031

Shut-off Valves, BrassTemperature Range:+30°C to +80°C

Working Pressure:8-10 bar

Tech Sheet 10024

Tube x Tube

0090

EVST-6 6 35.75EVST-8 8 36.50EVST-10 10 39.70

Check Valves, Brass• Minimum opening pressure 0.5psi

Tech Sheet 10025

Type CV100, Opens at 20” W.G., BSPP

0090

CV100-38 3/8” 10.00CV100-12 1/2” 10.00CV100-34 3/4” 14.00CV100-1 1” 18.55CV100-114 1.1/4” 27.35CV100-112 1.1/2” 48.15CV100-2 2” 67.20CV100-212 2.1/2” 183.95CV100-3 3” 275.25CV100-4 4” 583.00

Tech Sheet 10026

Type CV130, Swing Check Valve, BSPP

0089

CV130-38 3/8” 11.20CV130-12 1/2” 10.45CV130-34 3/4” 18.20CV130-1 1” 21.90CV130-114 1.1/4” 31.65CV130-112 1.1/2” 41.30CV130-2 2” 58.10CV130-212 2.1/2” 116.45CV130-3 3” 163.65CV130-4 4” 303.70

Type 6062, BSPP

0090

GBV-12 1/2” 75.80GBV-34 3/4” 97.80GBV-1 1” 154.90GBV-114 1.1/4” 152.70GBV-112 1.1/2” 261.55GBV-2 2” 412.25

Y Strainer, Brass, BSPP

0090

YS-38 3/8” 9.40YS-12 1/2” 10.90YS-34 3/4” 15.10YS-1 1” 21.60YS-114 1.1/4” 34.50YS-112 1.1/2” 44.45YS-2 2” 71.15YS-212 2.1/2” 148.80YS-3 3” 246.15YS-4 4” 475.85

Brass, Viton Seals, BSPP

0090

VFU8.V 1/8” 22.10VFU4.V 1/4” 25.00VFU3.V 3/8” 34.40VFU2.V 1/2” 34.40

Brass, EPDM Seals

0090

VFU8.E 1/8” 19.70VFU4.E 1/4” 21.90VFU3.E 3/8” 28.30VFU2.E 1/2” 30.90

Brass, NBR Seals, BSPP

0090

VUP8.M 1/8” 10.95VUP4.M 1/4” 13.30

Brass, Viton Seals, BSPP

0090

VUP8.VM 1/8” 9.80VUP4.VM 1/4” 15.20

Brass, EPDM Seals, BSPP

0090

VUP8.EM 1/8” 10.05VUP4.EM 1/4” 12.55






Maximum Working Pressure: 145 PSI








Maximum Working Pressure: 145 PSI


Tech Sheet 10302

07 Valves-1.indd 695 16/02/2015 09:06

696


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Sec

tio

n 7

– Va

lves

Valves

Gate Valves - Heavy Duty


Working Pressure:290 psi

Tech Sheet 10143

Type GV157, Brass, BSPP

0090

GV157-38 3/8” 14.00GV157-12 1/2” 10.25GV157-34 3/4” 13.60GV157-1 1” 19.40GV157-114 1.1/4” 31.60GV157-112 1.1/2” 40.40GV157-2 2” 61.10GV157-212 2.1/2” 138.95GV157-3 3” 140.00

Bronze Oblique Seating Stop Valves• SV73 is manufactured

in accordance with BS5154/B - PN20.

• PTFE Disc.• Cold Service: 20 bar

at -10 to 100°C.• Saturated Steam:

9 bar at 180°C.

Tech Sheet 10027

Needle Valves, BrassTemperature Range:0°C to +100°C

Tech Sheet 10028


Tech Sheet 10029

NPT Full Way Ball Valve, Brass, Unplated Tech Sheet 10030

Full Flow Locking Ball Valves• Complete with 2 Keys.

Tech Sheet 10031

High Pressure 2 Way Valves, Brass Tech Sheet 10032

Type GV160, Gunmetal/Brass, BSPP

0089

GV160-38 3/8” 18.40GV160-12 1/2” 20.40GV160-34 3/4” 28.85GV160-1 1” 36.75GV160-114 1.1/4” 54.60GV160-112 1.1/2” 74.40GV160-212 2.1/2” 189.70GV160-3 3” 257.05GV160-4 4” 390.45

Type SV73, Female x Female, BSPP

0090

SV73-12 1/2” 55.10SV73-34 3/4” 70.15SV73-1 1” 105.45SV73-2 2” 301.65


0090

EV-18 1/8” 23.40EV-14 1/4” 23.40EV-38 3/8” 25.90EV-12 1/2” 30.20

Male x Male, BSPT

0090

EVMM-18 1/8” 22.05EVMM-14 1/4” 24.10EVMM-38 3/8” 23.30EVMM-12 1/2” 30.20

Type BV50, Female x Female, Lever Handle, NPT

0090

BV50-12NPT 1/2” 32.25BV50-34NPT 3/4” 39.05

Type BV77, Female x Female, BSPP

0090

BV77-12 1/2” 166.05BV77-34 3/4” 154.40BV77-1 1” 187.50


0090

BV210-38 3/8” 64.15BV210-12 1/2” 74.30BV210-34 3/4” 113.40BV210-1 1” 150.05



Tech Sheet 10802

07 Valves-1.indd 696 16/02/2015 09:06

697

Sec

tio

n 7

– Va

lves


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Valves

Mini Ball Valves, BrassTemperature Range:-20°C to +150°C


Tech Sheet 10033

Tech Sheet 10034

Full Flow Valves, Extended Handle

Right Angled Full Flow Ball Valves Tech Sheet 10035

Full Way Ball Valves with Strainer

3 Way Diverter, Ball Valves

Panel Mounted Full Bore Ball Valves


PN 40, Female x Female, BSPP, Lever Handle

0090

2025-0916 1/4” 78.75

PN 40, Female x Female, BSPP, Butterfl y Handle

0090

2025-0940 1/4” 71.80

Slide Valves - On/Off Type, Brass


Type 6060, BSPP

0090

6060-18 1/8” 15.856060-14 1/4” 24.406060-38 3/8” 29.556060-12 1/2” 37.10

Type MVS, Female x Female, Screwdriver Slot, BSPP

0090

MVS-14 1/4” 8.85MVS-38 3/8” 15.65MVS-12 1/2” 12.50

Type MVS, Male x Female, Screwdriver Slot, BSPP

0090

MVSM-18 1/8” 10.70MVSM-14 1/4” 13.80MVSM-38 3/8” 12.45MVSM-12 1/2” 18.85


0090

BV581-38 3/8” 32.25BV581-12 1/2” 37.30BV581-34 3/4” 49.20BV581-1 1” 64.80


0090

BV07-12 1/2” 42.10BV07-34 3/4” 63.25BV07-1 1” 80.00


0090

BV620-12 1/2” 61.75BV620-34 3/4” 130.00

Type BV23, Female x Female x Female, BSPP

0090

BV23-12 1/2” 66.20BV23-34 3/4” 90.20BV23-1 1” 154.25

Tech Sheet 10298

Tech Sheet 10293

Tech Sheet 10294

Tech Sheet 10295

Tech Sheet 10295

Tech Sheet 10803

07 Valves-1.indd 697 16/02/2015 09:06

698


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Sec

tio

n 7

– Va

lves

Valves

Venting, Ball ValvesTemperature Ranges:Fluids:-10°C to +140°CGas:-10°C to +60°C


0090

VBV-14 1/4” 43.55VBV-38 3/8” 43.55VBV-12 1/2” 47.00VBV-34 3/4” 68.45VBV-1 1” 92.65

Bronze Self-Closing Lever Globe Valve• PTFE Disk• Stainless Steel Spring

Temperature Range:180°C at 10 bar


BSPP

0093

SC/LV/G1003-12 1/2” 151.75SC/LV/G1003-34 3/4” 237.25SC/LV/G1003-1 1” 311.80

Bronze Sight Glass/IndicatorSpecifi cation:Hardened single glass inspection window.

Maximum Temperature:150°C


Tech Sheet 821

BSPP

0090

2021-1330 1/2” 175.902021-1348 3/4” 339.402021-1355 1” 237.20

2/2 Brass Lever/Spring Poppet Valves

BSPP

0090

PBBLH-3/8 3/8” 46.20

PVC Non-return ValvesWorking Pressure:10 bar

Female/Female, Threaded BSPP

0090

2020-0481 1/2” 42.702020-0499 3/4” 38.002020-0507 1” 55.052020-0515 1.1/4” 49.352020-0523 1.1/2” 59.152020-0531 2” 87.30

PVC Ball Valves with Double UnionBody: PESeal: EPDM

Female/Female, Threaded BSPP

0090

2020-0424 1/2” 35.652020-0432 3/4” 45.102020-0440 1” 52.402020-0457 1.1/4” 51.502020-0465 1.1/2” 80.902020-0473 2” 111.95

Air Pinch ValvesControl Pressure:20 to 40 psi greater than material pressure

Here’s how it works…Air or liquid pressure at the control inlet collapses the internal rubber sleeve to provide immediate & positive shut-off.The rubber sleeve closes completely, even on large particulate matter, abrasive and corrosive materials. When open the sleeve allows full, unobstructed fl ow with little turbulence.N.B: Air pinch valve sleeves can be easily and economically replaced when they wear out. Other body & sleeve material options are available on request.

Maximum Actuation Pressure: 90 psi

With Polypropylene Body & Buna Sleeve, BSPP

0030

PINCH-AP6372 1/4” 76.35PINCH-AP6304 3/8” 96.60PINCH-AP6252 5/8” 132.15

Tech Sheet 10319

Tech Sheet 10322

Tech Sheet 10323

Tech Sheet 10324

Tech Sheet 10325

For UPVC Valves see page 800

07 Valves-1.indd 698 16/02/2015 09:06

699

Sec

tio

n 7

– Va

lves


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Valves

Plastic Ball ValvesBody:Polypropylene with NBR Seal

Operating Pressure:3.5 bar

Hose Tail x Hose Tail

0270

18530-1 12 3.3018530-2 16 3.3018530-3 20 3.30

Male BSPP x Male BSPP

0270

18570-1 1/2” 2.6018570-2 1/2” x 3/4” 2.6018570-3 3/4” 2.60

Hose Tail x Female BSPP

0270

18563-1 16 1/2” 4.7518563-2 16 3/4” 4.7518563-3 20 1/2” 4.7518563-4 20 3/4” 4.75

Hose Tail x Male BSPP

0270

18560-1 12 1/2” 3.4018560-2 12 3/4” 3.4018560-3 16 1/2” 3.4018560-4 16 3/4” 3.4018560-5 20 1/2” 3.4018560-6 20 3/4” 3.40

Plastic Push-in ValvesSuitable for the use in the Food Industry. Temperature Range:

30°C to 85°CMaximum Pressure:11 bar

Tube x Tube

0270

14330606 6 10.0014331010 10 10.6514331212 12 11.00

BSPT Male x Tube

0270

14340613 6 1/4” 9.9014341017 10 3/8” 10.2014341221 12 1/2” 10.85

BSPP Female 90°

0270

14350613 6 1/4” 11.3014351017 10 3/8” 8.2014351221 12 1/2” 12.20

In-line Mini Filter

0270

14480606 6 14.7014480808 8 15.4014481010 10 16.1514481212 12 16.95

Customers who bought from this page also purchased Worm Drive Hose Clamps – see page 1268

Tech Sheet 10326

Tech Sheet 10327

Tech Sheet 10328

07 Valves-1.indd 699 16/02/2015 09:06

700


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Sec

tio

n 7

– Va

lves

Valves

Auxiliary ValvesTemperature Range:-10°C to +60°C

Maximum Working Pressure:0-10 bar

Straight Union Check Valve, Tube x Tube

0018

331.05.04 4 11.30331.05.06 6 11.75331.05.08 8 12.15331.05.10 10 25.55331.05.12 12 27.30

Conical Check Out Valve, Tube x BSPT

0018

331.01.04.18 4 1/8” 7.40331.01.06.18 6 1/8” 7.90331.01.06.14 6 1/4” 8.50331.01.08.18 8 1/8” 8.40331.01.08.14 8 1/4” 8.95331.01.10.38 10 3/8” 21.25331.01.12.38 12 3/8” 21.80331.01.12.12 12 1/2” 27.20

Conical Check In Valve, Tube x BSPT

0018

331.02.04.18 4 1/8” 7.40331.02.06.18 6 1/8” 7.60331.02.06.14 6 1/4” 8.50331.02.08.18 8 1/8” 8.40331.02.08.14 8 1/4” 8.95331.02.10.38 10 3/8” 21.25331.02.12.38 12 3/8” 21.80331.02.12.12 12 1/2” 27.20

Ball Valves• Vaccum - 750mm 1.1Hg

Union Ball Valve, Tube x Tube

0018

351.01.06.06 6 16.40351.01.08.08 8 16.60351.01.10.10 10 22.25351.01.12.12 12 22.25

Straight Ball Valves, Tube x BSPP

0018

351.03.06.18 6 1/8” 16.40351.03.06.14 6 1/4” 17.00351.03.08.18 8 1/8” 15.95351.03.08.14 8 1/4” 16.60351.03.08.38 8 3/8” 17.00351.03.10.14 10 1/4” 23.30351.03.10.38 10 3/8” 23.30351.03.10.12 10 1/2” 23.30351.03.12.38 12 3/8” 24.00351.03.12.12 12 1/2” 23.30

90° Elbow Union Ball Valves, Tube x Tube

0018

351.04.06.06 6 15.65351.04.08.08 8 16.40351.04.10.10 10 23.30351.04.12.12 12 23.95

90° Elbow Union Ball Valves, Tube x BSPP

0018

351.06.06.18 6 1/8” 15.65351.06.06.14 6 1/4” 16.25351.06.08.18 8 1/8” 16.15351.06.08.14 8 1/4” 16.40351.06.08.38 8 3/8” 16.80351.06.10.14 10 1/4” 26.00351.06.10.38 10 3/8” 26.00351.06.10.12 10 1/2” 26.00351.06.12.38 12 3/8” 26.00351.06.12.12 12 1/2” 26.80

Tech Sheet 10329

Tech Sheet 10329

Tech Sheet 10329

Tech Sheet 10330

Tech Sheet 10330

Tech Sheet 10330

Tech Sheet 10330

For Pneumatic Valves– see pages 596-601

07 Valves-1.indd 700 16/02/2015 09:06

701

Sec

tio

n 7

– Va

lves


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Bronze Valves

Ball Valves• Full bore.


Maximum Working Pressure:40 bar rated

Tech Sheet 1817

2 Piece, Lever Handle, BSPT

0205

BVBZ345-12 1/2” 22.45BVBZ345-34 3/4” 28.75BVBZ345-1 1” 36.80BVBZ345-114 1.1/4” 72.15BVBZ345-112 1.1/2” 89.80BVBZ345-2 2” 138.85

Y Type Strainers• BSP Taper F/F ends. • BSP Taper F/F ends.







Tech Sheet 1821

PN20 Y Strainer, BSPT

0205

YSBZ368-12 1/2” 30.40YSBZ368-34 3/4” 40.50YSBZ368-1 1” 63.40YSBZ368-114 1.1/4” 92.00YSBZ368-112 1.1/2” 119.75YSBZ368-2 2” 195.00

Globe Valves• BS 5154 approved BSP Taper F/F ends.• Renewable PTFE seat.



Tech Sheet 1818

PN32 Hand Wheel, BSPT

0205

GVBZ350-12 1/2” 55.55GVBZ350-34 3/4” 81.70GVBZ350-1 1” 118.25GVBZ350-114 1.1/4” 164.35GVBZ350-112 1.1/2” 245.45GVBZ350-2 2” 373.80

Swing Check Valves

Tech Sheet 1822

PN20 Swing Check Valve, BSPT

0205

CVBZ384-12 1/2” 28.60CVBZ384-34 3/4” 38.90CVBZ384-1 1” 51.70CVBZ384-114 1.1/4” 72.80CVBZ384-112 1.1/2” 95.70CVBZ384-2 2” 145.10

Gate Valves• BS 5154 approved BSP Taper F/F ends.• Handwheel operation.

Tech Sheet 1819

PN20 Hand Wheel, BSPT

0205

GVBZ375HW-12 1/2” 32.20GVBZ375HW-34 3/4” 39.75GVBZ375HW-1 1” 54.85GVBZ375HW-114 1.1/4” 74.25GVBZ375HW-112 1.1/2” 97.35GVBZ375HW-2 2” 147.80

• BS 5154 approved BSP Taper F/F lockshield.

Tech Sheet 1820

PN20 Lock Shield, BSPT

0205

GVBZ375LS-12 1/2” 33.50GVBZ375LS-34 3/4” 41.40GVBZ375LS-1 1” 57.00GVBZ375LS-114 1.1/4” 77.25GVBZ375LS-112 1.1/2” 101.15GVBZ375LS-2 2” 153.70

BS5154B Approved. P.E.D. (Pressure Equipment Directive Compliance) – Suitable for Heating & Ventilation Applications.



07 Valves-1.indd 701 16/02/2015 09:06

702

07 Valves-1.indd 702 16/02/2015 09:06

703

Sec

tio

n 7

– Va

lves


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Stainless Steel Valves

316 Stainless Steel Ball ValvesBody: 316 Stainless SteelSeal: PTFE

Body: 316 Stainless SteelSeal: PTFE



Working Pressure:1/4” to 1.1/4”- 1000 psi1.1/2” to 2”- 800 psi

1 Piece, Reduced Bore, Female, BSPP

0099


Working Pressure:1000 psi Tech Sheet

1966

2 Piece, Full Bore, Female, BSPP

0099

BV2-14 1/4” 49.70BV2-38 3/8” 49.70BV2-12 1/2” 57.90BV2-34 3/4” 77.20BV2-1 1” 102.85BV2-114 1.1/4” 145.95BV2-112 1.1/2” 191.30BV2-2 2” 286.45BV2-212 2.1/2” 537.35


Working Pressure:1/4” to 1.1/4”- 2000 psi1.1/2” to 2”- 1500 psi

Tech Sheet 1967

2 Piece, Full Bore, Female, BSPP

0099

PBV2-14 1/4” 47.90PBV2-38 3/8” 47.90PBV2-12 1/2” 53.45PBV2-34 3/4” 68.10PBV2-1 1” 97.20PBV2-114 1.1/4” 132.50PBV2-112 1.1/2” 195.80PBV2-2 2” 288.10

Body: 316 Stainless SteelSeal: PTFEContact our Technical Dept. for Seal Kits.

3 Piece, Full Bore, Female, BSPP, Lockable Handle

0099

BV3-14 1/4” 57.45BV3-38 3/8” 57.45BV3-12 1/2” 74.90BV3-34 3/4” 93.30BV3-1 1” 115.45BV3-114 1.1/4” 137.85BV3-112 1.1/2” 222.10BV3-2 2” 319.80BV3-3 3” 859.55

Tech Sheet 1969

3 Way, T Port, Reduced Bore, Female, BSPP, 360˚ Lockable Handle

0099

BV73-14T 1/4” 133.25BV73-38T 3/8” 137.20BV73-12T 1/2” 190.45BV73-34T 3/4” 222.70BV73-1T 1” 257.50

3 Way, L Port, Reduced Bore, Female, BSPP, 360˚ Lockable Handle

0099

BV73-14L 1/4” 185.20BV73-12L 1/2” 192.30BV73-34L 3/4” 191.25BV73-1L 1” 254.95








Tech Sheet 1969



Tech Sheet 1965

Tech Sheet 1968

07 Valves-2.indd 703 16/02/2015 09:09

704


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Sec

tio

n 7

– Va

lves

Stainless Steel ISO Pad Valves


3 Piece, ISO Top Mounting, Butt Weld, Female

0099

3BW-14 1/4” 46.103BW-38 3/8” 49.803BW-12 1/2” 67.253BW-34 3/4” 87.653BW-1 1” 107.103BW-114 1.1/4” 160.303BW-112 1.1/2” 224.053BW-2 2” 302.153BW-212 2.1/2” 550.703BW-3 3” 813.453BW-4 4” 2174.60

Tech Sheet 1971

3 Piece, ISO Top Mounting, Socket Weld, Female

0099

3SW-14 1/4” 58.103SW-38 3/8” 58.103SW-12 1/2” 57.203SW-34 3/4” 76.053SW-1 1” 107.103SW-114 1.1/4” 203.303SW-112 1.1/2” 224.053SW-2 2” 302.153SW-212 2.1/2” 550.703SW-3 3” 934.653SW-4 4” 1667.70

Tech Sheet 1972

3 Piece, ISO Mounting Pad, Female, BSPP

0099

IB3-14 1/4” 46.10IB3-38 3/8” 44.95IB3-12 1/2” 57.20IB3-34 3/4” 82.55IB3-1 1” 109.30IB3-114 1.1/4” 160.30IB3-112 1.1/2” 224.05IB3-2 2” 302.15IB3-212 2.1/2” 550.70IB3-3 3” 934.65IB3-4 4” 1427.20

316 Stainless Steel Ball Valves



2 Piece, ISO Mounting Pad, Female, BSPP

0099

BV2-ISO-14 1/4” 47.25BV2-ISO-38 3/8” 47.25BV2-ISO-12 1/2” 46.65BV2-ISO-34 3/4” 58.00BV2-ISO-1 1” 81.10BV2-ISO-112 1.1/4” 146.60BV2-ISO-114 1.1/2” 105.60BV2-ISO-2 2” 209.00

Tech Sheet 1970

Tech Sheet 10139

07 Valves-2.indd 704 16/02/2015 09:09

705

Sec

tio

n 7

– Va

lves


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics


316 Stainless Steel Gate Valves

Working Temperature:+200°C


Tech Sheet 553

316 Stainless Steel Globe ValvesBody: 316 St. SteelSeal: PTFE


Tech Sheet 805

316 Stainless Steel Mini Ball Valves

Viton SealsWorking Temperature:-40°C to +230°C


Hexagon Profi le Female x Female, BSPP

0099

HEXSMBV14 1/4” 31.45HEXSMBV38 3/8” 32.45HEXSMBV12 1/2” 36.65

Hexagon Profi le Male x Female, BSPP

0099

HEXSMBV14M 1/4” 31.45HEXSMBV38M 3/8” 32.45HEXSMBV12M 1/2” 36.65

316 Stainless Steel Mini ValvesSeal: PTFE



0030

980-1/4 1/4” 14.00980-3/8 3/8” 14.00980-1/2 1/2” 18.10

Male BSPP x Female BSPT

0030

981-1/4 1/4” 17.25981-3/8 3/8” 14.00981-1/2 1/2” 21.80

2 Piece Flanged Ball Valves• ISO 5211• Top Flange Mounting• 316 Stainless Steel• Firesafe & Anti-Static

DesignSizes upto 12” (DN125-DN300) are available on request.







PN16

0099

PN16BV-1 1” 25 361.90

Sizes upto 12” (DN125-DN300) are available on request.

PN40

0099

PN40BV-112 1.1/2” 40 505.20


ANSI 150

0099

ANBV-1 1” 25 235.95ANBV-4 4” 100 2078.60

2 Piece Ball Valves

NPTF

0099

BV2NP-14 1/4” 40.20BV2NP-38 3/8” 37.75BV2NP-12 1/2” 59.05BV2NP-34 3/4” 79.55BV2NP-1 1” 83.50

BSPP

0099

2018-6979 1/2” 127.552018-6987 3/4” 152.602018-6995 1” 192.302018-7001 1.1/4” 179.402018-7019 1.1/2” 266.952018-7027 2” 281.20

BSPP

0099

SGV-14 1/4” 89.90SGV-38 3/8” 85.55SGV-12 1/2” 85.55SGV-34 3/4” 105.50SGV-1 1” 133.00SGV-114 1.1/4” 166.60

• ISO 5211• Top Flange Mounting• 316 Stainless Steel• Firesafe & Anti-Static Design




Tech Sheet 10331

Tech Sheet 10332

Tech Sheet 10333

Tech Sheet 10334

Tech Sheet 10337

Tech Sheet 10336

Sizes upto 12” (DN125-DN300) are available on request.

07 Valves-2.indd 705 16/02/2015 09:09

706


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Sec

tio

n 7

– Va

lves


316 Stainless Steel Needle ValvesSeal: PTFE


Working Pressure:6000 psi (414 bar)

Tech Sheet 10036

6,000 psi Rated Imperial Needle ValvesThe ‘IB’ series of needle valves are specially designed & manufactured for use in corrosive & hazardous environments. These valves are for use in process control, instrumentation & fl ow control applications. Feature Benefi ts: One piece body construction for strength & safety. Non rotating Vee tip design, which forms a bearing joint with the stem eliminating any rotation

between the plug & seat on closure ensuring long life. Testing: All valves are 100% factory tested & complete traceability is available upon request. Material: Body, Panel Nut, Washer & Gland Nut A479-316Stem: A479-316 / 17-4PHPacking: PTFEGrub Screw: Steel PlatedHandle: Stainless SteelVee Tip: A 564-630

Max Working Temperature:-29°C to +121°C

Working Pressure:6,000 psi (400 bar)

Tech Sheet 2156

Female x Female, NPTF

0292

PNV-IB-S-2-FF 1/8” 60.15PNV-IB-S-4-FF 1/4” 69.90PNV-IB-S-6-FF 3/8” 88.45PNV-IB-S-8-FF 1/2” 116.70PNV-IB-S-12-FF 3/4” 209.25PNV-IB-S-16-FF 1” 265.55

Male x Female, NPTF

0292

PNV-IB-S-2-MF 1/8” 66.90PNV-IB-S-4-MF 1/4” 76.75PNV-IB-S-6-MF 3/8” 97.70PNV-IB-S-8-MF 1/2” 127.70PNV-IB-S-12-MF 3/4” 230.85PNV-IB-S-16-MF 1” 293.35

OD Compression

0292

NV6000-18 1/8” 55.10NV6000-14 1/4” 63.50NV6000-38 3/8” 80.25NV6000-12 1/2” 106.15NV6000-34 3/4” 237.30NV6000-1 1” 323.60

10,000 psi Rated Imperial Needle Valves

Max Working Temperature:-50°C to +93°C

Working Pressure:10,000 psi (700 bar)

Female x Female, NPTF

0292

PNV-HP-S-2-FF 1/8” 138.70PNV-HP-S-4-FF 1/4” 138.70PNV-HP-S-6-FF 3/8” 168.90PNV-HP-S-8-FF 1/2” 269.65PNV-HP-S-12-FF 3/4” 388.70PNV-HP-S-16-FF 1” 584.20

Male x Female, NPTF

0292

PNV-HP-S-2-MF 1/8” 154.45PNV-HP-S-4-MF 1/4” 154.45PNV-HP-S-6-MF 3/8” 185.55PNV-HP-S-8-MF 1/2” 297.45PNV-HP-S-12-MF 3/4” 427.15PNV-HP-S-16-MF 1” 638.60

The ‘HP’ series of needle valves are specially designed & manufactured for use in corrosive & hazardous environments. These valves are for use in process control, instrumentation & fl ow control applications. Feature Benefi ts: One piece body construction for strength & safety. Non rotating Vee tip design, which forms a bearing joint with the stem eliminating any rotation between the plug & seat on closure ensuring long life. Testing: Each valve is hydrostatically tested in accordance with MSS-SP-99. This procedure includes testing of the body

cavity. A Hydrostatic test is performed with pure water or other liquids of similar or lower viscosity at 1.5 times & seat leakage test at 1.1 times of the maximum working pressure. Each valve is also tested with Nitrogen Gas at 1000psi for seat, seal & shell leakage. Other tests like vibration, temperature, Helium are available upon request. Material: Body, Stem, Packing Washer, Lock Nut & Gland Retainer A479-316/A-105Gland Packing: Glass Filled PTFEPacking: PTFEHandle: Stainless SteelDust Cap: PlasticVee Tip: A 564-630

BSPP

0099

2018-6938 1/4” 96.352018-6946 3/8” 106.302018-6953 1/2” 135.90

NPTF

0099

2018-6904 1/4” 96.352018-6912 3/8” 94.152018-6920 1/2” 123.80

Tech Sheet 2156

Tech Sheet 2156

Tech Sheet 2157

3,000 psi Rated Mini Needle Valve

Viton Seals



Tech Sheet 10506

NPT

0292

PMV-H-S-4-FF-V 1/4” Female x Female 49.35PMV-H-S-4-MF-V 1/4” Male x Female 49.35

Tech Sheet 2157

07 Valves-2.indd 706 16/02/2015 09:09

707

Sec

tio

n 7

– Va

lves


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics


Manifold Valves2 Valve manifold pipe to pipe design for separate mounting, connection system impulse lines and transmitters, having a simple 2 valve confi guration, which allows for easy block, bleed and calibration of static pressure transmitter of gauge.

Other mounting options are available on request.


Tech Sheet 10216

2 Valve Manifold, Pipe to Pipe, NPT

0380

P2VM-SS-8-R 1/2” 89.30

2 Valve manifold remote mount fl ange to fl ange design for separate mounting, connecting system impulse lines and transmitters, having a simple 2 valve confi guration, which allows for easy block, bleed and calibration of static pressure transmitter of gauge.


2 Valve Manifold, Remote Mount, NPT

0380

P2VM-SS-8-RM 1/2” 87.55

3 Valve manifold pipe to pipe design for connecting system impulse lines and transmitters. This valve consists of 1/2” NPT female connectors on 54mm centres and 1 equalizer valve and 2 block valves.



0380

P3VM-SS-8-R 1/2” 135.85

5 Valve manifold pipe to pipe design for connecting system impulse lines and transmitters. This valve consists of 1/2” NPT female connectors on 54mm centres to suit the inlet connection. This valves provides 2 instrument isolating valves, 2 equalizer valves and 1 bleed valve (for testing).



0380

P5VM-SS-8-R 1/2” 226.20

6,000 psi, Check ValvesViton Seals



Female, NPT

0292

PCV-02-SS-FF 1/8” 58.40PCV-04-SS-FF 1/4” 61.50PCV-06-SS-FF 3/8” 69.30PCV-08-SS-FF 1/2” 102.65PCV-12-SS-FF 3/4” 241.70PCV-16-SS-FF 1” 297.15

10,000 psi Check Valves


Female, NPT.

0292

PCV-02-SS-FF-10K 1/8” 131.25PCV-04-SS-FF-10K 1/4” 138.60PCV-06-SS-FF-10K 3/8” 156.00PCV-08-SS-FF-10K 1/2” 231.00PCV-12-SS-FF-10K 3/4” 543.90PCV-16-SS-FF-10K 1” 668.65

6,000 psi Rated Ball Valves

Working Temperature:0°C to +40°C

Female, NPT

0292

PBV-2-S-02-FF 1/8” 112.75PBV-2-S-04-FF 1/4” 112.75PBV-2-S-06-FF 3/8” 123.70PBV-2-S-08-FF 1/2” 169.90PBV-2-S-12-FF 3/4” 268.80PBV-2-S-16-FF 1” 506.30



Tech Sheet 10507

Tech Sheet 10508

Cracking Pressure: 0.35 psi

Cracking Pressure: 0.35 psi

07 Valves-2.indd 707 16/02/2015 09:09

708


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Sec

tio

n 7

– Va

lves


316 Stainless Steel Swing Check Valves




316 Stainless Steel Y Strainers


Tech Sheet 797

BSPP

0099

2019-3953 1/4” 56.302019-3960 3/8” 59.752019-3967 1/2” 69.402019-3975 3/4” 82.452019-3983 1” 114.702019-3991 1.1/4” 123.752019-4031 1.1/2” 181.352019-4049 2” 312.50

Stainless Steel Screen for Y Strainers• 1.0mm per

hole, 40 holes per square inch.

0099

2024-7656 1/2” 20.402024-7664 3/4” 20.402024-7672 1” 20.402024-7680 1.1/4” 40.902024-7698 1.1/2” 68.152024-7706 2” 98.75

Hygienic valves

Valves - Weld Type

Ball Valves

0147

BLV-WT-1.0 1” 117.50BLV-WT-2.0 2” 258.55

Butterfl y Valves

0147

BFV-WT-1.5 1.1/2” 120.90BFV-WT-2.0 2” 224.30BFV-WT-2.5 2.1/2” 233.90BFV-WT-3.0 3” 310.75BFV-WT-4.0 4” 532.25

Butterfl y Valves

0147

BFV-CT-1.0 1” 147.00BFV-CT-1.5 1.1/2” 191.60BFV-CT-2.0 2” 228.65BFV-CT-3.0 3” 270.40BFV-CT-4.0 4” 388.20

BSPP

0099

2018-7028 1/4” 69.252018-7035 3/8” 73.852018-7043 1/2” 106.102018-7050 3/4” 126.402018-7068 1” 156.302018-7076 1.1/4” 167.102018-7092 1.1/2” 214.852018-7118 2” 253.40

Valves - Clamp Type

Ball Valves

0147

BLV-CT-1.0 1” 320.15BLV-CT-1.5 1.1/2” 307.50

Tech Sheet 10338

Tech Sheet 10371

Tech Sheet 10372

Tech Sheet 10372

Tech Sheet 10370

07 Valves-2.indd 708 16/02/2015 09:09

709

Sec

tio

n 7

– Va

lves


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics


Cromax Spring Check Valves304SS Body Viton Seal.Other Sizes on Request.

Max Pressure:16 bar

Tech Sheet 1871

304 Stainless Steel, BSPP

0317

VSCCRO30404 1/4” 56.35VSCCRO30406 3/8” 56.35VSCCRO30408 1/2” 52.50VSCCRO30412 3/4” 72.30VSCCRO30416 1” 83.40VSCCRO30420 1.1/4” 113.10VSCCRO30424 1.1/2” 129.55VSCCRO30432 2” 257.30

316SS Body Viton Seal.Other Sizes on Request.

316 Stainless Steel, BSPP

0317

VSCCRO31604 1/4” 103.05VSCCRO31606 3/8” 103.05VSCCRO31608 1/2” 95.90VSCCRO31612 3/4” 136.85VSCCRO31616 1” 150.55VSCCRO31620 1.1/4” 192.40VSCCRO31624 1.1/2” 220.80VSCCRO31632 2” 430.90

Flanged Check ValvesOther Sizes on Request.

Tech Sheet 1872

ANSI150

0317

VSG2024SL16 1” 326.70VSG2024SL24 1.1/2” 453.50VSG2024SL32 2” 571.85VSG2024SL48 3” 1025.35VSG2024SL64 4” 1807.65

Tech Sheet 1875

PN16

0317

VSC1624 1.1/2” 417.45VSC1632 2” 521.00VSC1640 2.1/2” 726.00VSC1648 3” 943.80VSC1664 4” 1491.90VSC1696 6” 2623.40

Flanged Gate Valves

Tech Sheet 1873

ANSI150

0317


Tech Sheet 1876

PN16

0317

VSG1624 1.1/2” 544.50VSG1632 2” 671.55VSG1640 2.1/2” 907.50VSG1648 3” 1234.20VSG1664 4” 1706.10VSG1696 6” 2778.60

Flanged Y Strainer Valves Tech Sheet

1874

ANSI150

0317


Tech Sheet 1877

PN16

0317

VSY1624 1.1/2” 344.85VSY1632 2” 453.75VSY1640 2.1/2” 653.40VSY1648 3” 826.55VSY1664 4” 1168.85VSY1696 6” 2268.75

Wafer Check ValveViton Seal.Other Sizes on Request.

Tech Sheet 1878

PN16

0317

VSCWP32 2” 100.65VSCWP40 2.1/2” 124.00VSCWP48 3” 160.60VSCWP64 4” 227.40VSCWP80 5” 328.80VSCWP96 6” 429.60VSCWP128 8” 659.70VSCWP160 10” 966.25

Other sizes on Request.

Other sizes on Request.

Other Sizes on Request.



For Stainless Steel Push-in Fittings see page 541

07 Valves-2.indd 709 16/02/2015 09:10

710


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Sec

tio

n 7

– Va

lves

Ball & Check Valves

Ball Valves IDEALSuitable for domestic water services, heating and air-conditioning plants, compressed air systems.

Temperature Range:-20°C to 150°C in absence of steam

Tech Sheet 1826

Full Flow Ball Valves, BrassTemperature Range:-20°C to +150°C

Tech Sheet 1827


Suitable for domestic water services, heating & air-conditioning plants, compressed air systems.Brass nickel plated.Lever handle in steel.Thread ISO228 (DIN EN ISO 228 and BS EN ISO 228).

Full Flow Ball Valves Type 090, BSPP

0089

IT90-14 1/4” 9.25IT90-38 3/8” 9.25IT90-12 1/2” 10.65IT90-34 3/4” 14.80IT90-1 1” 22.55IT90-114 1.1/4” 32.85IT90-112 1.1/2” 51.60IT90-2 2” 76.80IT90-212 2.1/2” 179.75IT90-3 3” 278.00IT90-4 4” 443.90

Type BV91, Male x Female, Lever Handle, BSPP

0089


Type BV92, Female x Female, T Handle, BSPP

0089

BV92-14 1/4” 9.80BV92-38 3/8” 10.00BV92-12 1/2” 12.25BV92-34 3/4” 15.70BV92-1 1” 21.10

Type BV93, Male x Female, T Handle, BSPP

0089

BV93-14 1/4” 10.20BV93-38 3/8” 10.40BV93-12 1/2” 11.75BV93-34 3/4” 16.85BV93-1 1” 24.90

Male x Male, BSPT

0089

BV99-38 3/8” 9.95BV99-12 1/2” 14.25BV99-34 3/4” 18.95BV99-1 1” 29.15BV99-114 1.1/4” 55.55BV99-112 1.1/2” 60.25BV99-2 2” 95.15

Type 115, Female x Female with Drain Valve, BSPP

0089

IT115-12 1/2” 13.65IT115-34 3/4” 18.40IT115-1 1” 24.80IT115-114 1.1/4” 39.35IT115-112 1.1/2” 53.85IT115-2 2” 81.45

Tech Sheet 1826

Tech Sheet 1826

Tech Sheet 1826

Temperature Range:-20°C to +110°Cin the absence of steam.

Tech Sheet 1826

Customers who bought from this page also purchased Brass Compression Fittings – see pages 941-946

07 Valves-2.indd 710 16/02/2015 09:10

711

Sec

tio

n 7

– Va

lves


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Ball & Check Valves

3 Way Ball ValvesTemperature Range:-20°C to +150°C


Tech Sheet 1829

Type BV128, L Ported, BSPP

0089

BV128-14L 1/4” 78.80BV128-38L 3/8” 78.80BV128-12L 1/2” 81.60BV128-34L 3/4” 133.20BV128-1L 1” 194.90BV128-114L 1.1/4” 262.55BV128-112L 1.1/2” 429.70BV128-2L 2” 642.50

Type BV128, T Ported, BSPP

0089

BV128-14T 1/4” 78.80BV128-38T 3/8” 78.80BV128-12T 1/2” 81.60BV128-34T 3/4” 133.20BV128-1T 1” 194.90BV128-114T 1.1/4” 262.55BV128-112T 1.1/2” 429.70BV128-2T 2” 642.50

Mini Ball ValvesSuitable for domestic water services, heating and air-conditioning plants, compressed air systems.


Maximum Working Pressure:220 psi

Tech Sheet 1828

Female/Female, BSPP

0089

IT125-14 1/4” 6.75IT125-38 3/8” 7.10IT125-12 1/2” 8.00IT125-34 3/4” 11.75


Male/Female, BSPP

0089

IT126-14 1/4” 6.75IT126-38 3/8” 6.50IT126-12 1/2” 7.70IT126-34 3/4” 11.55

Standard Flow Ball Valves Tech Sheet

1830

Type 216, Vienna, Female x Female, BSPP

0089

IT216-14 1/4” 8.55IT216-38 3/8” 8.80IT216-12 1/2” 8.80IT216-34 3/4” 12.45IT216-1 1” 18.10IT216-114 1.1/4” 36.65IT216-112 1.1/2” 41.00IT216-2 2” 67.10

Type 217, Vienna, Male x Female, BSPP

0089



Tech Sheet 1828

For Aluminium Hose Tails see page 556

07 Valves-2.indd 711 16/02/2015 09:10

712


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Sec

tio

n 7

– Va

lves

Ball & Check Valves

Gas Full Flow Ball Valves, BrassTemperature Range: -20°C to +60°C


Tech Sheet 1831

Type BV70, Female x Female, Lever Handle, BSPP

0089


Type BV71, Male x Female, Lever Handle, BSPP

0089


Tech Sheet 1832

Type BV72, T Handle, Female x Female, BSPP

0089

BV72-14 1/4” 10.65BV72-38 3/8” 11.10BV72-12 1/2” 13.90BV72-34 3/4” 21.15BV72-1 1” 31.25

Type BV74, T Handle, Male x Female, BSPP

0089

BV74-14 1/4” 10.65BV74-38 3/8” 11.10BV74-12 1/2” 13.90BV74-34 3/4” 21.20BV74-1 1” 30.80

Bibcock, Ball Valves Tech Sheet

1833

Type BV174, Male x Hosetail, BSPP

0089

BV174-12 1/2” 13 10.55BV174-34 3/4” 19 15.20

• Lockable eyelet 7mm I.D.

Temperature Range:-20°C to 80°C

Maximum Working Pressure:217.5 PSI

Tech Sheet 1834

Brass Drain Ball Valves(DIN EN ISO 228 and BS EN ISO 228).

Temperature Range:-20°C to +110°Cin absence of steam.


Tech Sheet 1831

Tech Sheet 1832

With a Lockpad Eye & Brass Connection, BSPP

0089

IT144-12 1/2” 13 19.55IT144-34 3/4” 19 21.70

Tank Filling & Emptying Ball Cock, BSPP

0089

IT139-38 3/8” 10 11.55IT139-12 1/2” 13 11.55IT139-34 3/4” 19 22.35

For Gas Mini Ball Valves see page 692

Tech Sheet 10339

07 Valves-2.indd 712 16/02/2015 09:10

713

Sec

tio

n 7

– Va

lves


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Ball & Check Valves

Full Bore 90º Angle Valve

Type BV06, Male x Male, BSPP

0089

BV06-12 1/2” 13.70

Ball Valves for use with ManifoldsSuitable for domestic water services, heating and air-conditioning plants, compressed air systems.


Tech Sheet 1827

Full Flow Ball Valves, Straight Male/Female, BSPP

0089

IT98-12 1/2” 13.90IT98-34 3/4” 19.40IT98-1 1” 39.95IT98-114 1.1/4” 46.15


Full Flow Ball Valves, Elbow Male/Female, BSPP

0089

IT298-12 1/2” 20.75IT298-34 3/4” 26.70IT298-1 1” 50.90

Brass Hose Connector for Pumps & TanksNominal Pressure 25 bar.Thread ISO228 (DIN EN ISO 228 and BS EN ISO 228).

Male BSPT x Female BSPP

0089

IT110-1 1” 11.95

Check ValvesSuitable for domestic water services, heating and air-conditioning plants, compressed air systems. It can be installed in any position: vertical, horizontal or diagonal.


Tech Sheet 1837

Europa Check Valves, BSPP

0089

IT100-38 3/8” 11.55IT100-12 1/2” 11.50IT100-34 3/4” 14.70IT100-1 1” 20.30IT100-114 1.1/4” 31.40IT100-112 1.1/2” 42.20IT100-2 2” 65.95IT100-212 2.1/2” 152.10IT100-3 3” 229.30IT100-4 4” 370.40

Suitable for use with gasoline and fuels in general too.

Temperature Range:-15°C to 150°Cin absence of steam

Tech Sheet 1840

Roma Check Valves, BSPP

0089

IT104-38 3/8” 17.30IT104-12 1/2” 17.45IT104-34 3/4” 21.85IT104-1 1” 29.00IT104-114 1.1/4” 35.40IT104-112 1.1/2” 69.90IT104-2 2” 81.80

Tech Sheet 1837

York Check Valves, BSPP

0089


Body: Brass, Seals: NBR, Spring: Stainless Steel.Thread ISO228 (DIN EN ISO 228 & BS EN ISO 228).

Tech Sheet 1982

Block Check Valves, BSPP

0089

IT101-12 1/2” 6.95IT101-34 3/4” 9.10IT101-1 1” 11.40IT101-114 1.1/4” 16.05IT101-112 1.1/2” 21.15IT101-2 2” 28.75

StrainersTemperature Range:-15°C to 150°C

Stainless Steel, BSPP

0089


Material: Polymer.Thread ISO228 (DIN EN ISO 228 & BS EN ISO 228).

Tech Sheet 1983

Polymer, BSPP

0089

IT107-38 3/8” 1.00IT107-12 1/2” 1.10IT107-34 3/4” 1.20IT107-1 1” 1.30IT107-114 1.1/4” 2.05IT107-112 1.1/2” 3.05IT107-2 2” 4.40

Tech Sheet 1827

Tech Sheet 1840


Tech Sheet 10335

Tech Sheet 10340

07 Valves-2.indd 713 16/02/2015 09:10

714


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Sec

tio

n 7

– Va

lves

Ball & Check Valves

Y Strainers• 500µm


Tech Sheet 1840

Brass, BSPP

0089



Brass, Nickel Plated, BSPP

0089


Brass Gate ValvesTemperature Range:0°C to 120°C

Tech Sheet 1829

PN10/PN16, BSPP

0089



PN20, BSPP

0089

IT157-12 1/2” 13.70IT157-34 3/4” 19.25IT157-1 1” 26.70IT157-114 1.1/4” 37.00IT157-112 1.1/2” 49.00IT157-2 2” 69.90IT157-212 2.1/2” 116.10IT157-3 3” 147.35IT157-4 4” 264.35

Tech Sheet 1840


Temperature Range:0°C to 120°C

Tech Sheet 1829

Foot ValvesWorking Temperature:-20°C to +100°C

Tech Sheet 10197

York Brass Body, BSPP

0089

IT108-38 3/8” 12 12.70IT108-12 1/2” 12 13.10IT108-34 3/4” 12 17.40IT108-1 1” 12 21.85IT108-114 1.1/4” 10 32.15IT108-112 1.1/2” 10 47.90IT108-2 2” 10 64.40IT108-212 2.1/2” 6 124.60IT108-3 3” 6 169.45IT108-4 4” 6 292.80

Pressure Reducing Valves



Female, BSPT

0089

1430012 1/2” 48.701430034 3/4” 54.851430100 1” 78.601430114 1.1/4” 159.301430112 1.1/2” 179.301430200 2” 270.751430212 2.1/2” 458.201430300 3” 648.201430400 4” 1482.15

Male, BSPT

0089

1430012MM 1/2” 56.801430034MM 3/4” 65.651430100MM 1” 97.401430114MM 1.1/4” 188.301430112MM 1.1/2” 221.701430200MM 2” 341.00

Tech Sheet 10522

For Brass Nickel Plated Adaptors see page 557

07 Valves-2.indd 714 16/02/2015 09:10

715

Sec

tio

n 7

– Va

lves


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Ball & Check Valves

Adjustable Check Valves

Female, BSPP

1012

LE-7930 10 10 1/8” 1 to 0.10 23.00LE-7930 13 13 1/4” 1 to 0.10 24.25LE-7930 17 17 3/8” 1 to 0.15 29.00

Adjustable Check Valves, Supply Version

Male x Female, BSPP

1012

LE-7931 10 10 1/8” 1 to 0.10 26.50LE-7931 13 13 1/4” 1 to 0.10 30.10LE-7931 17 17 3/8” 1 to 0.15 34.80

Adjustable Check Valves, Exhaust Version

Male x Female, BSPP

1012

LE-7932 10 10 1/8” 1 to 0.10 26.50LE-7932 13 13 1/4” 1 to 0.10 30.10LE-7932 17 17 3/8” 1 to 0.15 34.80

Flow Control RegulatorsStainless steel fl ow control regulators control the speed of a pneumatic cylinder (models LE-7820 7822) or the speed of a chemical of food fl uid carried (model 7822: for fl uids compatible with FKM and PTFE seals) in aggressive environments or submitted to high mechanical or chemical constraints.Designed without retention zones, these models are perfectly suitable for food applications or requiring frequent washing of installations.

Working Temperature:-15°C to 120°C

Working Pressure:1 to 16 bar

Tech Sheet 10320

In-line, 1 Way Adjustment, BSPP

1012

LE-7820 00 10 1/8” 72.20LE-7820 00 13 1/4” 78.60LE-7820 00 17 3/8” 139.45LE-7820 00 21 1/2” 141.70

In-line, Bi-directional, BSPP

1012

LE-7822 00 10 1/8” 77.50LE-7822 00 13 1/4” 125.25LE-7822 00 17 3/8” 141.70LE-7822 00 21 1/2” 146.15

Non-return ValvesLegris stainless steel non-return valves allow fl uids to pass in one direction whilst blocking fl ow in the other direction. Robust and extremely compact, they are suitable for use as a safety item in all fl uids circuits. They

are ideal for use in severe conditions and in aggressive environments.Operation: A stainless steel valve blocks the fl uid passage, when the pressure differential is lower than 0.25 bar.

Working Temperature:-20°C to 180°C

Working Pressure:0.5 to 40 bar

Uni-directional, Female/Female, BSPP

1012

LE-4890 10 10 1/8” 22 53.10LE-4890 13 13 1/4” 22 70.85LE-4890 17 17 3/8” 30 86.30LE-4890 21 21 1/2” 30 95.30LE-4890 27 27 3/4” 35 97.55LE-4890 34 34 1” 42 124.50

Uni-directional, Male/Female, BSPP

1012

LE-4891 10 10 1/8” 22 60.80LE-4891 13 13 1/4” 22 64.50LE-4891 17 17 3/8” 30 72.05LE-4891 21 21 1/2” 30 79.65LE-4891 27 27 3/4” 35 102.40LE-4891 34 34 1” 42 130.40

Uni-directional, Female/Male, BSPP

1012

LE-4892 10 10 1/8” 22 60.80LE-4892 13 13 1/4” 22 64.50LE-4892 17 17 3/8” 30 72.05LE-4892 21 21 1/2” 30 79.65LE-4892 27 27 3/4” 35 102.40LE-4892 34 34 1” 42 130.40

Uni-directional, Female/Female, NPT

1012

LE-4895 11 11 1/8” 22 55.70LE-4895 14 14 1/4” 22 59.20LE-4895 18 18 3/8” 30 72.20LE-4895 22 22 1/2” 30 79.80

Brass nickel plated Brass nickel plated Brass nickel plated

Tech Sheet 10660

Tech Sheet 10320

07 Valves-2.indd 715 16/02/2015 09:10

716


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Sec

tio

n 7

– Va

lves

Ball Valves

Mini Ball ValvesTemperature Range:-20°C to +80°C

Max Working Pressure:10 bar

Push-in 3/2 with Vent

1012

LE-7913 04 00 4 11.85LE-7913 06 00 6 12.30LE-7913 08 00 8 13.10LE-7913 10 00 10 13.80LE-7913 12 00 12 15.65

Thread with 3/2 Vent, BSPP

1012

LE-7914 06 10 6 1/8” 13.10LE-7914 08 13 8 1/4” 13.80LE-7914 10 17 10 3/8” 18.90LE-7914 12 21 12 1/2” 16.40

2/2 with Push-in Connection

1012

LE-7910 04 00 4 11.85LE-7910 06 00 6 13.90LE-7910 08 00 8 14.80LE-7910 10 00 10 15.50LE-7910 12 00 12 17.70

Male Thread 2/2 with Push-in Connection, BSPP

1012

LE-7911 06 10 6 1/8” 13.10LE-7911 08 13 8 1/4” 13.80LE-7911 10 17 10 3/8” 14.90LE-7911 12 21 12 1/2” 16.40

Standard In-line Vented Ball Valves


Double Female BSPP with Threaded Exhaust

1012

LE-0489 07 13 1/4” 7 28.40LE-0489 10 17 3/8” 10 30.30LE-0489 13 21 1/2” 13 43.35LE-0489 18 27 3/4” 18 61.20LE-0489 23 34 1” 23 84.35


Double Female Panel Mountable with Threaded Exhaust, BSPP

1012

LE-0449 07 13 1/4” 7 42.90LE-0449 10 17 3/8” 10 45.60LE-0449 13 21 1/2” 13 54.40

Double Female Vented, BSPP

1012

LE-0469 04 10 1/8” 4 28.40LE-0469 07 13 1/4” 7 32.10LE-0469 10 17 3/8” 10 28.60LE-0469 13 21 1/2” 13 30.10LE-0469 18 27 3/4” 18 57.70LE-0469 23 34 1” 23 70.05

Standard In-line Ball Valves

Double Female Panel Mount, BSPP

1012

LE-0446 04 10 1/8” 4 25.00LE-0446 07 13 1/4” 7 30.70LE-0446 10 17 3/8” 10 35.00LE-0446 13 21 1/2” 13 36.40

Standard Ball Valves for Screw Fixing

Double Female, BSPP

1012

LE-6402 04 10 1/8” 4 30.30LE-6402 07 13 1/4” 7 36.10LE-6402 10 17 3/8” 10 34.45LE-6402 13 21 1/2” 13 44.95LE-6402 20 27 3/4” 20 60.60LE-6402 23 34 1” 23 102.60






Tech Sheet 10456

Tech Sheet 10450

Tech Sheet 10452

Tech Sheet 10454

Tech Sheet 10455

Tech Sheet 10451

Tech Sheet 10453

Tech Sheet 10448

Tech Sheet 10449

07 Valves-2.indd 716 16/02/2015 09:10

717

Sec

tio

n 7

– Va

lves


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Ball Valves

Standard 3 Way Ball Valves

• L Ported Closed Centre



Female Right Angled Porting, BSPP

1012

LE-0482 06 13 1/4” 6 40.40LE-0482 09 17 3/8” 9 37.75LE-0482 12 21 1/2” 12 47.20LE-0482 23 34 1” 23 105.90

Female Right Angled Porting - Panel Mountable, BSPP

1012

LE-0448 06 13 1/4” 6 31.65LE-0448 09 17 3/8” 9 44.35LE-0448 12 21 1/2” 12 64.60

• L Ported

Female Equal Plane Porting - Panel Mountable, BSPP

1012

LE-0452 04 10 1/8” 4 48.50LE-0452 06 13 1/4” 6 55.50

Female Right Angled Porting without Closed Position, BSPP

1012

LE-0483 04 10 1/8” 4 29.10LE-0483 06 13 1/4” 6 29.20LE-0483 09 17 3/8” 9 31.50LE-0483 12 21 1/2” 12 45.70

Lockable Ball Valves• Legris lockable ball valves have been developed

in order to prevent potentially dangerous consequences by unintended operation. Lockable in different positions, this range meets international safety requirements, such as ISO 4414. Lockable ball valves feature a plate fi xed to the valve body and a plate attached to the valve stem. When the plates are pad-locked together, the valve handle cannot be moved.

The valves are lockable:• In both open and closed position, by one padlock:

models 0437 and 0439.• Only in the closed position by up to three

padlocks: models 0437 and 0438.

Max Pressure:40 bar

Max Pressure:40 bar

In-line Double Female, BSPP

1012

LE-0432 10 17 3/8” 10 46.80LE-0432 13 21 1/2” 13 52.50LE-0432 20 27 3/4” 20 66.65LE-0432 23 34 1” 23 81.05

Max Pressure:40 bar

Double Female with Vent, BSPP

1012

LE-0439 07 13 1/4” 7 46.50LE-0439 10 17 3/8” 10 49.75LE-0439 13 21 1/2” 13 66.40LE-0439 18 27 3/4” 18 77.25LE-0439 23 34 1” 23 116.25

In-line Double Female with Vent, BSPP

1012

LE-0437 10 17 3/8” 10 58.50LE-0437 13 21 1/2” 13 78.20LE-0437 18 27 3/4” 18 92.45LE-0437 23 34 1” 23 105.90

Max Pressure:20 bar

Female 3 Way with Sand Blasted Nickel Plated Body, BSPP

1012

LE-0438 12 21 1/2” 12 64.95



For Brass Nickel Plated Adaptors see page 557

Tech Sheet 10461

Tech Sheet 10457

Tech Sheet 10462

Tech Sheet 10458

Tech Sheet 10460

Tech Sheet 10464

Tech Sheet 10459

Tech Sheet 10463

07 Valves-2.indd 717 16/02/2015 09:10

718


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Sec

tio

n 7

– Va

lves

Safety ValvesWith the introduction of the European Pressure Equipment Directive, which recommend relevant testing and quality assurance with appropriate certifi cation with regard to safety. This range of safety valves are manufactured and tested in accordance to the regulations (DIN 3320.AD SHEET A2/A4) which meets applicable specifi cations both nationally and internationally. Compliance with the component test report, by the identifi cation the manufacture provides a guarantee for the specifi ed setting values.Test Certifi cates come as standard.Note: This product is CE marked, to comply with legislation.

Page Tech Sheet 1762

Nominal Diameter 8mm, 1/4” BSPP

0093

2035-0773 1 40.952042-2887 1.5 40.952042-2895 2 40.952020-8860 2.5 40.952042-2903 3 40.952042-2911 3.5 40.952020-8864 4 40.952042-2929 4.5 40.952020-8872 5 40.952042-2937 5.5 40.952042-2945 6 40.952042-2952 6.5 40.952042-2960 7 40.952020-8880 7.5 40.952020-8898 8 42.002042-2978 8.5 40.952031-7020 9 40.952020-8906 10 40.952042-2986 10.5 40.952020-8914 11 40.952020-8922 11.5 42.002020-8930 12 40.952020-8948 15 42.00


0093

2020-8955 5 52.752020-8971 6 52.752020-8989 7 50.602020-8997 8 55.652020-9003 10 55.652020-9011 11 50.602020-9029 12 55.652020-9045 15 55.65


0093

2042-2994 0.5 50.602042-3000 1.5 50.602042-3018 2.5 50.602042-3026 3.5 50.602020-9052 4 52.752020-9060 5 50.602042-3034 5.5 50.602020-9086 6 50.602042-3042 6.5 52.752020-9094 7 50.602020-9102 7.5 55.652020-9110 8 50.602042-3059 8.5 50.602042-3067 9 52.752020-9128 10 50.602042-3075 10.5 52.752020-9136 11 50.602020-9144 11.5 55.652020-9151 12 50.602042-3083 12.5 50.602020-9169 15 50.602042-3091 16 50.602042-3109 30 51.80


0093

2020-9177 6 58.402020-9185 7 57.802020-9193 8 56.002020-9201 10 56.002020-9219 11 56.00

Other relief settings available on special request.

Safety Valves

07 Valves-3.indd 718 16/02/2015 09:15

719

Sec

tio

n 7

– Va

lves


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Safety Valves

Wade Safety Relief Valves - Series 6000

Specifi cation: The Series 6000 is a high lift safety relief valve with atmospheric discharge suitable for air and inert gas applications. The fl ow is de-rated and measured in accordance with BS6759 Part 2: 1984. The valve re-seats by minus 10% of set pressure.

Maximum Temperature: 140°CMinimum Temperature: -15°C

Maximum Set Pressure:12.5 bar

Series 6000 High Lift Safety Relief Valve, Male BSPT

0095

6000/06/G/5.5 1/4” 5.5 32.906000/06/H/9.0 1/4” 9 32.906000/06/J/11.0 1/4” 11 32.90

Maximum Temperature: 140°CMinimum Temperature: -15°C


0095

6200/15/G/5.5 1/2” 5.5 73.206200/15/H/9.0 1/2” 9 81.406200/20/G/5.5 3/4” 5.5 87.80

Valves for higher pressure ratings are available. Safety valves are PED approved and CE marked.


0095

6100/06/J/11.0 1/4” 11 65.806100/10/J/11.0 3/8” 11 68.356100/15/G/5.5 1/2” 5.5 69.756100/15/H/9.0 1/2” 9 69.756100/15/J/11.0 1/2” 11 69.756100/20/J/11.0 3/4” 11 76.156100/25/J/11.0 1” 11 91.00


0095

6500/15/G/5.5 1/2” 5.5 81.306500/25/G/5.5 1” 5.5 166.10

Specifi cation: The Series 6000 is a high lift safety relief valve with side outlet discharge suitable for air and inert gas applications. The fl ow is de-rated and measured in accordance with BS6759 Part 2: 1984. The valve re-seats by minus 10% of set pressure.Valves for higher pressure ratings are available.Safety valves are PED approved and CE marked.


0095

6300/15/G/5.5 1/2” 5.5 93.90

Pressure Relief ValvesAll Series 1784 Valves are factory pre-set and sealed to prevent tampering. Manufactured under regulations of The National Board of Boiler & Pressure Vessel Inspectors in accordance with Section VIII of the ASME Code covering valves for pressure vessels.Pre-set pressure relief valves are precision manufactured to protect against equipment damaged or personal injury that may result from dangerous pressure build-up.• Automatically vents at selected pressure.• Automatically resets when pressure returns to

‘normal’.• Brass body with stainless steel internal

components.

Temperature Ranges:Type 1776:0°C to +180°C(0°F to +350°F)

Tech Sheet 835

Type 1776, Male, 1/4” NPT

0090

1776K-0-05 5 12 21.601776K-0-10 10 30 14.501776K-0-15 15 43 17.801776K-0-20 20 50 19.001776K-0-25 25 56 17.651776K-0-30 30 63 19.901776K-0-40 40 82 18.801776K-0-50 50 97 17.801776K-0-60 60 110 21.601776K-0-75 75 134 21.30

Individual Test Certs to be requested at the time of order on Wade P & No’s.

Valves for higher pressure ratings are available. Safety valves are PED approved and CE marked.

Tech Sheet 10341

Tech Sheet 10341

Tech Sheet 10341

Tech Sheet 10341

No Test Certs available on the above.

Tech Sheet 10341

07 Valves-3.indd 719 16/02/2015 09:15

720


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Sec

tio

n 7

– Va

lves

Safety Valves

High Lift Safety Valve (Fig 500)Applications: The Fig 500 High Lift Safety Valve has been designed primarily for use on unvented hot water heating systems, where a high capacity, emergency steam relief capability is required. High capacity and resilient PTFE seating, also make the Fig 500 ideal for steam, air and inert gas applications. A PTFE to Viton seating design is also available where greater seal tightness is required.Construction: The Fig 500 is constructed in gunmetal, with diaphragm protected working parts and PTFE to metal seating. All wetted parts are manufactured from dezincifi cation resistant materials, approved by the Water Research Centre for use on potable water. Standard inlet and outlet connections have female threads to BS 21, with the outlet connection one size larger than the inlet. Sizes from DN20 upwards, are available with fl anged inlet connections; other thread forms are also available. For other specifi c technical requirements consult the technical department.Note: Due to pressure setting and certifi cation of this product normal delivery will be up to 5 working days, manufacturer’s stock permitting.


BSPP

0115

500-10-1 3/8” 1/2” 1 157.90500-10-1.5 3/8” 1/2” 1.5 157.90500-10-2 3/8” 1/2” 2 157.90500-10-2.5 3/8” 1/2” 2.5 157.90500-10-3 3/8” 1/2” 3 157.90500-10-3.5 3/8” 1/2” 3.5 157.90500-10-4 3/8” 1/2” 4 157.90500-10-5 3/8” 1/2” 5 157.90500-10-5.5 3/8” 1/2” 5.5 157.90500-10-6 3/8” 1/2” 6 157.90500-10-6.5 3/8” 1/2” 6.5 157.90500-10-8 3/8” 1/2” 8 157.90500-10-9.5 3/8” 1/2” 9.5 157.90500-10-10 3/8” 1/2” 10 157.90500-10-11 3/8” 1/2” 11 157.90500-10-12 3/8” 1/2” 12 157.90500-10-12.5 3/8” 1/2” 12.5 157.90500-15-1 1/2” 3/4” 1 193.00500-15-3 1/2” 3/4” 3 193.00500-15-4 1/2” 3/4” 4 193.00500-15-5 1/2” 3/4” 5 193.00500-15-5.5 1/2” 3/4” 5.5 193.00500-15-6 1/2” 3/4” 6 193.00500-15-6.5 1/2” 3/4” 6.5 193.00500-15-7 1/2” 3/4” 7 193.00500-15-7.5 1/2” 3/4” 7.5 193.00500-15-8.5 1/2” 3/4” 8.5 193.00

Individual Test Certs to be requested at the time of order

Features:• Resilient PTFE seating designs.• High degree of seating tightness.• Suitable for hot water, steam and air.• High discharge capacity.• Diaphragm protected working parts.• Safe manual testing.

• Easy inspection and cleaning.• Pressure setting locked & sealed.• Designed and tested to BS 6759.• Capacities certifi ed by ATOC.• Approved by Water Research Centre.• UKWFBS listed.

We have listed all the popular sizes and pressure ratings, however other variations are available

0115

500-15-10 1/2” 3/4” 10 193.00500-15-10.5 1/2” 3/4” 10.5 193.00500-15-11 1/2” 3/4” 11 193.00500-15-11.5 1/2” 3/4” 11.5 193.00500-20-1.5 3/4” 1” 1.5 247.50500-20-2.5 3/4” 1” 2.5 247.50500-20-3 3/4” 1” 3 247.50500-20-3.5 3/4” 1” 3.5 247.50500-20-4 3/4” 1” 4 247.50500-20-5 3/4” 1” 5 247.50500-20-5.5 3/4” 1” 5.5 247.50500-20-6 3/4” 1” 6 247.50500-20-6.5 3/4” 1” 6.5 247.50500-20-7 3/4” 1” 7 247.50500-20-7.5 3/4” 1” 7.5 247.50500-20-8 3/4” 1” 8 247.50500-20-8.5 3/4” 1” 8.5 247.50500-20-9 3/4” 1” 9 247.50500-20-10 3/4” 1” 10 247.50500-20-11 3/4” 1” 11 247.50500-20-11.5 3/4” 1” 11.5 247.50500-20-12 3/4” 1” 12 247.50500-20-12.5 3/4” 1” 12.5 247.50500-25-1.5 1” 1.1/4” 1.5 349.60500-25-2 1” 1.1/4” 2 349.60500-25-2.5 1” 1.1/4” 2.5 349.60500-25-3 1” 1.1/4” 3 349.60

0115

500-25-3.5 1” 1.1/4” 3.5 349.60500-25-4 1” 1.1/4” 4 349.60500-25-5.5 1” 1.1/4” 5.5 349.60500-25-7 1” 1.1/4” 7 349.60500-25-7.5 1” 1.1/4” 7.5 349.60500-25-8 1” 1.1/4” 8 349.60500-25-8.5 1” 1.1/4” 8.5 349.60500-25-11 1” 1.1/4” 11 349.60500-25-12.5 1” 1.1/4” 12.5 349.60500-32-3 1.1/4” 1.1/2” 3 491.80500-32-3.5 1.1/4” 1.1/2” 3.5 491.80500-32-5 1.1/4” 1.1/2” 5 491.80500-32-7.5 1.1/4” 1.1/2” 7.5 491.80500-32-8.5 1.1/4” 1.1/2” 8.5 491.80500-32-10 1.1/4” 1.1/2” 10 491.80500-32-11 1.1/4” 1.1/2” 11 491.80500-40-1.5 1.1/2” 2” 1.5 644.80500-40-3 1.1/2” 2” 3 644.80500-40-3.5 1.1/2” 2” 3.5 644.80500-40-4 1.1/2” 2” 4 644.80500-40-7 1.1/2” 2” 7 644.80500-40-7.5 1.1/2” 2” 7.5 644.80500-40-12 1.1/2” 2” 12 644.80500-50-3.5 2” 2.1/2” 3.5 931.70500-50-7 2” 2.1/2” 7 931.70500-50-12.5 2” 2.1/2” 12.5 931.70

07 Valves-3.indd 720 16/02/2015 09:15

721

Sec

tio

n 7

– Va

lves


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Safety Valves

Safety Relief Valve (Fig 542)Applications: The Fig 542 Safety Valve is an extremely versatile valve, suitable for use on hot water, steam or air. Although designed primarily for the protection of hot water boilers, its wide range of applications make it an ideal valve for has a general purpose safety valve.Construction: The Fig 542 is of gunmetal construction, with diaphragm protected working parts and PTFE to metal seating. All wetted parts manufactured from dezincifi cation resistant materials, approved by the Water Research Centre for use on potable water. Inlet and outlet connections are of equal size, with female threads to BS 21. Sizes from DN32 upwards, are also available with fl anged inlet connections. For other specifi c technical requirement refer to drawing 705 or consult Nabic technical department.Note: Due to pressure setting and certifi cation of this product normal delivery will be up to 5 working days, manufacturer’s stock permitting.


BSPP

0115

542-15-1 1/2” 1 154.00542-15-1.5 1/2” 1.5 154.00542-15-2 1/2” 2 154.00542-15-2.5 1/2” 2.5 154.00542-15-3 1/2” 3 154.00542-15-3.5 1/2” 3.5 154.00542-15-4 1/2” 4 154.00542-15-4.5 1/2” 4.5 154.00542-15-5 1/2” 5 154.00542-15-5.5 1/2” 5.5 154.00542-15-6 1/2” 6 154.00542-15-7 1/2” 7 154.00542-15-7.5 1/2” 7.5 154.00542-15-8 1/2” 8 154.00542-15-8.5 1/2” 8.5 154.00542-15-9 1/2” 9 154.00542-15-9.5 1/2” 9.5 154.00542-15-10 1/2” 10 154.00542-15-10.5 1/2” 10.5 154.00542-20-1 3/4” 1 176.75542-20-1.5 3/4” 1.5 176.75542-20-2 3/4” 2 176.75542-20-2.5 3/4” 2.5 176.75542-20-3 3/4” 3 176.75542-20-3.5 3/4” 3.5 176.75542-20-4 3/4” 4 176.75542-20-4.5 3/4” 4.5 176.75542-20-5 3/4” 5 176.75542-20-5.5 3/4” 5.5 176.75542-20-6 3/4” 6 176.75542-20-7 3/4” 7 176.75


0115

542-20-7.5 3/4” 7.5 176.75542-20-8 3/4” 8 176.75542-20-8.5 3/4” 8.5 176.75542-20-9 3/4” 9 176.75542-20-10 3/4” 10 176.75542-20-10.5 3/4” 10.5 176.75542-25-1 1” 1 233.65542-25-1.5 1” 1.5 233.65542-25-2 1” 2 233.65542-25-2.5 1” 2.5 233.65542-25-3 1” 3 233.65542-25-3.5 1” 3.5 233.65542-25-4 1” 4 233.65542-25-4.5 1” 4.5 233.65542-25-5 1” 5 233.65542-25-6 1” 6 233.65542-25-7 1” 7 233.65542-25-7.5 1” 7.5 233.65542-25-8 1” 8 233.65542-25-8.5 1” 8.5 233.65542-25-9 1” 9 233.65542-25-9.5 1” 9.5 233.65542-25-10 1” 10 233.65542-25-10.5 1” 10.5 233.65542-32-1 1.1/4” 1 325.20542-32-2.5 1.1/4” 2.5 325.20542-32-3 1.1/4” 3 325.20542-32-3.5 1.1/4” 3.5 325.20542-32-4 1.1/4” 4 325.20542-32-4.5 1.1/4” 4.5 325.20542-32-5 1.1/4” 5 325.20

0115

542-32-6.5 1.1/4” 6.5 325.20542-32-7 1.1/4” 7 325.20542-32-8 1.1/4” 8 325.20542-32-8.5 1.1/4” 8.5 325.20542-32-9 1.1/4” 9 325.20542-32-9.5 1.1/4” 9.5 325.20542-32-10 1.1/4” 10 325.20542-40-1 1.1/2” 1 435.55542-40-1.5 1.1/2” 1.5 435.55542-40-2 1.1/2” 2 435.55542-40-3.5 1.1/2” 3.5 435.55542-40-4 1.1/2” 4 435.55542-40-5 1.1/2” 5 435.55542-40-6 1.1/2” 6 435.55542-40-7 1.1/2” 7 435.55542-40-7.5 1.1/2” 7.5 435.55542-40-8 1.1/2” 8 435.55542-40-10 1.1/2” 10 435.55542-40-10.5 1.1/2” 10.5 435.55542-50-2 2” 2 549.70542-50-3.5 2” 3.5 549.70542-50-6 2” 6 549.70542-50-7 2” 7 549.70542-50-7.5 2” 7.5 549.70542-50-8 2” 8 549.70542-50-10 2” 10 549.70542-50-10.5 2” 10.5 549.70542-65-3 2.1/2” 3 771.90542-65-4 2.1/2” 4 771.90542-65-7.5 2.1/2” 7.5 771.90

Features:• Resilient PTFE seating designs.• High degree of seat tightness.• Suitable for hot water, steam or air.• Diaphragm protected working parts.• Safe manual testing.• Easy inspection and cleaning.

• Pressure setting locked and sealed.• Designed and tested to BS 6759.• Capacities certifi ed by ATOC• Approved by Water Research Centre.• UKWFBS listed.

07 Valves-3.indd 721 16/02/2015 09:15

722


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Sec

tio

n 7

– Va

lves

Safety Valves

Liquid Relief Valve (Fig 542L)Applications: NABIC Liquid Relief Valves are intended for use where pressure tightness is required on the discharge side of the valve. They are ideal for use on pump relief and bypass relief applications, also on outside installations and where tamper proof units are required.Available options are: Stainless steel springs, high pressure versions and viton seat design.Construction: The valves are of gunmetal construction with top guided copper alloy parts, fi tted with chrome vanadium spring as standard they also incorporate the proven NABIC PTFE to metal seating design. O-Ring seals ensure pressure tightness at cover and cap joints.Note: Due to pressure setting and certifi cation of this product normal delivery will be up to 5 working days, manufacturer’s stock permitting.Request Tech-Sheet No. 1400 for Technical Information.


BSPP

0115

542L-15-1 1/2” 1 155.45542L-15-1.5 1/2” 1.5 155.45542L-15-2 1/2” 2 155.45542L-15-2.5 1/2” 2.5 155.45542L-15-3 1/2” 3 155.45542L-15-3.5 1/2” 3.5 155.45542L-15-4 1/2” 4 155.45542L-15-4.5 1/2” 4.5 155.45542L-15-5 1/2” 5 155.45542L-15-6 1/2” 6 155.45542L-15-7 1/2” 7 155.45542L-15-8.5 1/2” 8.5 155.45542L-15-10 1/2” 10 155.45542L-15-10.5 1/2” 10.5 155.45542L-20-1 3/4” 1 155.45542L-20-1.5 3/4” 1.5 178.45542L-20-2 3/4” 2 178.45542L-20-2.5 3/4” 2.5 178.45542L-20-3 3/4” 3 178.45542L-20-3.5 3/4” 3.5 178.45542L-20-5 3/4” 5 178.45542L-20-6 3/4” 6 178.45


Features:• High degree of seat tightness.• Designed and tested to BS 6759.

• WRAS approved for use on potable water.• Certifi ed discharge tables.

0115

542L-20-6.5 3/4” 6.5 178.45542L-20-7 3/4” 7 178.45542L-20-8 3/4” 8 178.45542L-20-9 3/4” 9 178.45542L-20-10 3/4” 10 178.45542L-25-1 1” 1 236.05542L-25-1.5 1” 1.5 236.05542L-25-2 1” 2 236.05542L-25-2.5 1” 2.5 236.05542L-25-3 1” 3 236.05542L-25-3.5 1” 3.5 236.05542L-25-4 1” 4 236.05542L-25-5 1” 5 236.05542L-25-6 1” 6 236.05542L-25-7 1” 7 236.05542L-25-8 1” 8 236.05542L-25-10 1” 10 236.05542L-25-10.5 1” 10.5 236.05542L-32-3 1.1/4” 3 325.20542L-32-4 1.1/4” 4 325.20542L-32-8 1.1/4” 8 325.20542L-32-10 1.1/4” 10 325.20

0115

542L-32-10.5 1.1/4” 10.5 325.20542L-40-1.5 1.1/2” 1.5 435.55542L-40-2.5 1.1/2” 2.5 435.55542L-40-5 1.1/2” 5 435.55542L-40-6 1.1/2” 6 435.55542L-40-7 1.1/2” 7 435.55542L-40-10 1.1/2” 10 435.55542L-50-1.5 2” 1.5 549.70542L-50-2 2” 2 549.70542L-50-4 2” 4 549.70542L-50-7.5 2” 7.5 549.70542L-50-8.5 2” 8.5 549.70542L-50-9.5 2” 9.5 549.70542L-50-10 2” 10 549.70542L-50-10.5 2” 10.5 549.70542L-65-2 2.1/2” 2 771.90542L-65-3 2.1/2” 3 771.90542L-65-3.5 2.1/2” 3.5 771.90542L-65-5 2.1/2” 5 771.90542L-80-4.5 3” 4.5 1105.15542L-80-7 3” 7 1105.15

07 Valves-3.indd 722 16/02/2015 09:15

723

Sec

tio

n 7

– Va

lves


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Safety Valves

Atmospheric Safety Valves, 6mm-15mmSeetru Atmospheric Discharge Safety Relief valves are compact, highly effi cient and incorporate the exclusive ‘Tutchtite’ seal technology to give repeatable bubble tight sealing performance.Suitable for Air & Gases including refrigerant.Type approved and/or manufactured in comformance with national and international standards which include BS6759 Part 2 & 3, ISO 4126 and TUV (Germany) in accordance with AD Merkblatt A2. Compliant with the requirements of the European Equipment Directive 97/23/EC and CE marked Flow rates calculated:Std Ltrs/Sec of Air @ 15°CSeals: VitonSealing: Elastomer

MaximumTemperature:180°C

Nominal Bore 6mm, 1/4” BSPT Male

0171

SEE010EA1B 25 5.5 30.80SEE0107A1B 38 9 30.80SEE0106A1B 46 11 30.80

Nominal Bore 8mm, 1/4” BSPP Male

0171

SEE9111A1B 12 1 50.15SEE9112A1B 16 1.5 50.15SEE9113A1B 19 2 50.15SEE9114A1B 22 2.5 50.15SEE9115A1B 26 3 50.15SEE911AA1B 30 3.5 50.15SEE911BA1B 34 4 50.15SEE911CA1B 37 4.5 50.15SEE911EA1B 44 5.5 50.15SEE911FA1B 47 6 50.15SEE911GA1B 51 6.5 50.15SEE911HA1B 54 7 50.15SEE9119A1B 57 7.5 50.15SEE9118A1B 61 8 50.15SEE911JA1B 64 8.5 50.15SEE9117A1B 68 9 50.15SEE911LA1B 74 10 50.15SEE911MA1B 78 10.5 50.15SEE9116A1B 81 11 50.15SEE911NA1B 85 11.5 50.15SEE911PA1B 88 12 50.15SEE911XA1B 109 15 50.15


0171



0171

SEE021DA1B 40 5 50.15SEE0216A1B 81 11 50.15SEE021PA1B 88 12 47.80


0171

SEE921FA1B 47 6 50.15SEE921HA1B 54 7 50.15SEE9218A1B 61 8 50.15SEE921LA1B 74 10 50.15SEE9216A1B 81 11 50.15SEE921PA1B 88 12 50.15SEE921XA1B 109 15 50.15


0171



0171

SEE9320A1B 12 0.5 66.65SEE9322A1B 24 1.5 66.65SEE9324A1B 36 2.5 66.65SEE932AA1B 47 3.5 66.65SEE932BA1B 52 4 66.65SEE932DA1B 63 5 66.65SEE932EA1B 68 5.5 66.65SEE932FA1B 74 6 66.65SEE932GA1B 79 6.5 66.65SEE932HA1B 84 7 66.65SEE9329A1B 90 7.5 66.65SEE9328A1B 95 8 66.65SEE932JA1B 100 8.5 66.65SEE9327A1B 106 9 66.65SEE932LA1B 116 10 66.65SEE932MA1B 122 10.5 66.65SEE9326A1B 127 11 66.65SEE932NA1B 132 11.5 66.65SEE932PA1B 138 12 66.65SEE932RA1B 143 12.5 66.65SEE932XA1B 170 15 66.65SEE932YA1B 180 16 66.65


0171

SEE942FA1B 74 6 66.65SEE942HA1B 84 7 66.65SEE9428A1B 95 8 66.65SEE9427A1B 106 9 66.65SEE9426A1B 127 11 66.65


0171

SEE0447A1B 263 9 112.50SEE0436A1B 315 11 110.80

Nominal Bore 15mm, 1” BSPT Male

0171

SEE0546A1B 315 11 110.80Individual Test Certs come as standard with above

Tech Sheet 10342

Tech Sheet 10343

Tech Sheet 10343

Tech Sheet 10343

Tech Sheet 10344

Tech Sheet 10344

Tech Sheet 10345

Tech Sheet 10345

Tech Sheet 10345

Tech Sheet 10345

07 Valves-3.indd 723 16/02/2015 09:15

724


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Sec

tio

n 7

– Va

lves

Safety Valves

Brass Enclosed Safety Valves, Liquid Duty Nominal Bore, 10mm-13mmSeetru Enclosed Discharge Safety Relief valves are compact and highly effi cient. Polymers such as Viton, Nitrile, Silicone, Neoprene and EPDM offer excellent sealing performance.These valves are suitable for for a wide range of applications. They are available is stainless steel, dezincifi cation resistant brass or a combination of dezincifi cation resistant brass with stainless steel trim. Type approved and/or designed in accordance with national & international standards which include BS6759 part 2 & 3, ISO4126-1:1991, TUV (Germany) in compliance with AD Merkblatt A2 and BAM (Germany) requirements for oxygen.Compliant with the requirements of the European Pressure Directive 97/23/EC and CE marked.Oxygen service valves are subject to degreasing at additional cost.Seals: Viton Sealing: Elastomer




10mm, 3/8” x 3/4” BSPP Male/Female

0171

SEE9221P2B 2380 1 120.85SEE9222P2B 2913 1.5 120.85SEE9223P2B 3364 2 120.85SEE9224P2B 3761 2.5 120.85SEE9225P2B 4120 3 120.85SEE922AP2B 4450 3.5 120.85SEE922BP2B 4757 4 120.85SEE922CP2B 5046 4.5 120.85SEE922DP2B 5319 5 120.85SEE922EP2B 5579 5.5 120.85SEE922FP2B 5827 6 120.85SEE922GP2B 6065 6.5 120.85SEE922HP2B 6294 7 120.85SEE9229P2B 6514 7.5 120.85SEE9228P2B 6728 8 120.85SEE922JP2B 6935 8.5 120.85SEE9227P2B 7136 9 120.85SEE922KP2B 7332 9.5 120.85SEE922MP2B 7708 10.5 120.85SEE9226P2B 7889 11 120.85SEE922NP2B 8067 11.5 120.85SEE922PP2B 8240 12 120.85SEE922RP2B 8410 12.5 120.85

10mm, 1/2” x 3/4” BSPP Male/Female

0171

SEE9321P2B 2378 1 120.85SEE9322P2B 2913 1.5 120.85SEE9323P2B 3364 2 120.85SEE9324P2B 3761 2.5 120.85SEE9325P2B 4120 3 120.85SEE932AP2B 4450 3.5 120.85SEE932BP2B 4757 4 120.85SEE932CP2B 5046 4.5 120.85SEE932DP2B 5319 5 120.85SEE932EP2B 5579 5.5 120.85SEE932FP2B 5827 6 120.85SEE932GP2B 6065 6.5 120.85SEE932HP2B 6294 7 120.85SEE9329P2B 6514 7.5 120.85SEE9328P2B 6728 8 120.85SEE932JP2B 6935 8.5 120.85SEE932KP2B 7332 9.5 120.85SEE932LP2B 7527 10 120.85SEE932MP2B 7708 10.5 120.85SEE9326P2B 7889 11 120.85SEE932NP2B 8067 11.5 120.85SEE932PP2B 8240 12 120.85SEE932RP2B 8410 12.5 120.85

13mm, 3/4” x 1” BSPP Male/Female

0171

SEE9431P2B 4780 1 170.45SEE9432P2B 5854 1.5 170.45SEE9433P2B 6759 2 170.45SEE9434P2B 7557 2.5 170.45SEE9435P2B 8279 3 170.45SEE943AP2B 8942 3.5 170.45SEE943BP2B 9559 4 170.45SEE943CP2B 10139 4.5 170.45SEE943DP2B 10687 5 170.45SEE943EP2B 11204 5.5 170.45SEE943FP2B 11707 6 170.45SEE943GP2B 12185 6.5 170.45SEE943HP2B 12645 7 170.45SEE9439P2B 13089 7.5 170.45SEE9438P2B 13518 8 170.45SEE943JP2B 13934 8.5 170.45SEE9437P2B 14338 9 170.45SEE943KP2B 14731 9.5 170.45SEE943LP2B 15114 10 170.45SEE943MP2B 15487 10.5 170.45SEE9436P2B 15852 11 170.45SEE943NP2B 16208 11.5 170.45SEE943PP2B 16557 12 170.45SEE943RP2B 16898 12.5 170.45

18, 20 and 25 nominal bore valves available in 1.1/4” & 1.1/2” sizes.

Ask our technical department for additional information.Individual Test Certs come as standard with above

Liquid Duty Only Calculated: Kg/hr Water @ 15°C



Tech Sheet 10346

Tech Sheet 10347

Tech Sheet 10347

07 Valves-3.indd 724 16/02/2015 09:15

725

Sec

tio

n 7

– Va

lves


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Automatic Air Elimination

Air EliminatorsTemperature Rating:93°C

Temperature Rating:93°C


Tech Sheet 547

BSPP

0115

AE-A Type A Vertical 1/2” 3/8” 276.45AE-B Type B Vertical Lockshield Isolator 1/2” 3/8” 275.40AE-C Type C Vertical Lockshield & Check Valve 1/2” 3/8” 344.80

Service Kits

0115

AE-SP-ABD Float Assembly for Type A, B & D Valve 179.10AE-SP-C Float Assembly for Type C Valve 144.80

Boiler Vent Valves


Tech Sheet 546

Univent Boiler Vent Valves, Fig 1688, BSPP

0115

UV-1688-025D 1” 371.05UV-1688-032D 1.1/4” 426.65UV-1688-050D 2” 814.70

Tech Sheet 548

3 Way Boiler Vent Valves, Fig 1988, BSPP

0115

VCN-1988-025 1” 222.95VCN-1988-040 1.1/2” 380.60VCN-1988-050 2” 541.80

Temperature Rating:93°C


For KELM™ Angle Seat Valves see page 586

07 Valves-3.indd 725 16/02/2015 09:15

726


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Sec

tio

n 7

– Va

lves

Sight Glasses & Flow Indicators

200 Series - All Stainless SteelA low cost, all stainless steel sight fl ow indicator straight through type.

Maximum Rating:10 bar at 200°C

Tech Sheet 10037

233 Model Through Type

0115

RHO-FIS-146410-1 1/2” BSPT 15 70 228.05RHO-FIS-146420-2 1” BSPP 25 90 288.30

A low cost, all stainless steel sight fl ow indicator fi tted with a fl ap & scale plate to give an indication of the fl ow rate.


Tech Sheet 2030

234 Model with Flap & Plate

0115

RHO-FIS-146510-1 1/2” BSPT 15 70 237.00RHO-FIS-146510-2 1/2” BSPP 15 70 254.65RHO-FIS-146515-2 3/4” BSPP 20 70 242.05RHO-FIS-146520-1 1” BSPT 25 90 323.20RHO-FIS-146530-1 1.1/2” BSPT 40 110 550.90

400 Series - Straight Through Sight Flow Indicator with Spinner/Ball



Tech Sheet 10038

With Spinner, Gun Metal

0115

RHO-FIG-170300-1 1/4” BSPT 30 200 100.60RHO-FIG-170300-2 1/4” BSPP 30 200 100.60RHO-FIG-170305-1 3/8” BSPT 50 450 99.35RHO-FIG-170305-2 3/8” BSPP 50 450 103.80RHO-FIG-170310-1 1/2” BSPT 60 600 107.05RHO-FIG-170310-2 1/2” BSPP 60 600 107.05RHO-FIG-170315-1 3/4” BSPT 120 1600 152.50RHO-FIG-170315-2 3/4” BSPP 120 1600 152.50RHO-FIG-170320-1 1” BSPT 300 1600 165.95RHO-FIG-170320-2 1” BSPP 300 1600 191.55


With Spinner, Stainless Steel

0115

RHO-FIS-140300-1 1/4” BSPT 30 200 176.70RHO-FIS-140305-1 3/8” BSPT 50 450 132.85RHO-FIS-140305-2 3/8” BSPP 50 450 176.70RHO-FIS-140310-1 1/2” BSPT 60 600 224.50RHO-FIS-140310-2 1/2” BSPP 60 600 224.50RHO-FIS-140315-1 3/4” BSPT 120 1600 224.50RHO-FIS-140320-1 1” BSPT 300 1600 280.35RHO-FIS-140320-2 1” BSPP 300 1600 280.35

With Ball, Gun Metal

0115

RHO-FIG-176600-1 1/4” BSPT 30 200 77.70RHO-FIG-176600-2 1/4” BSPP 30 200 81.20RHO-FIG-176605-1 3/8” BSPT 50 450 93.40RHO-FIG-176610-1 1/2” BSPT 60 600 96.35RHO-FIG-176610-2 1/2” BSPP 60 600 96.35RHO-FIG-176615-1 3/4” BSPT 120 1600 137.25RHO-FIG-176615-2 3/4” BSPP 120 1600 170.40RHO-FIG-176615-3 3/4” NPT 120 1600 119.90RHO-FIG-176620-1 1” BSPT 300 1600 172.35RHO-FIG-176620-2 1” BSPP 300 1600 304.85

Tech Sheet 10038

Tech Sheet 10038

For Malleable Iron Fittings see page 1061

07 Valves-3.indd 726 16/02/2015 09:15

727

Sec

tio

n 7

– Va

lves


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Commissioning Valves

Art 25, Fixed Orifi ce• EPDM Seat

Temperature Rating:-10°C to +120°C

Maximum Pressure Rating:16 bar

DZR Brass, BSPP

0205

ADRE25050 1/2” 121.00ADRE25075 3/4” 147.30ADRE25100 1” 184.10ADRE25125 1.1/4” 273.75ADRE25150 1.1/2” 361.05ADRE25200 2” 507.05

Art 28, Variable Orifi ceMaximum Pressure Rating:20 bar

DZR Brass, BSPP

0205

ADRX28050 1/2” 87.35ADRX28075 3/4” 93.10ADRX28100 1” 104.00ADRX28125 1.1/4” 165.70ADRX28150 1.1/2” 185.65ADRX28200 2” 212.40

Art 26, Double Regulating

DZR Brass, BSPP

0205

ADRF26050 1/2” 84.15ADRF26075 3/4” 106.20ADRF26100 1” 130.30ADRF26125 1.1/4” 199.80ADRF26150 1.1/2” 334.30ADRF26200 2” 437.55

Art 250, Double Regulating, Flanged• Flanged PN16

Ductile Iron, BSPP

0205

ADRD250200 2” 556.05ADRD250250 2.1/2” 567.10ADRD250300 3” 688.55ADRD250400 4” 1021.45ADRD250500 5” 1517.30ADRD250600 6” 2142.40ADRD250800 8” 3490.30ADRD2501000 10” 5399.55ADRD2501200 12” 7868.95

Art 27, Metering Station

DZR Brass, BSPP

0205

ADRF27050 1/2” 52.50ADRF27075 3/4” 58.10ADRF27100 1” 71.05ADRF27125 1.1/4” 82.50ADRF27150 1.1/2” 91.55ADRF27200 2” 124.15

Art 270, Metering Station• Wafer Pattern

Maximum Pressure Rating:16+ bar

Stainless Steel

0205

ADRC270200 2” 243.65ADRC270250 2.1/2” 278.90ADRC270300 3” 306.25ADRC270400 4” 354.10ADRC270500 5” 466.65ADRC270600 6” 556.30ADRC270800 8” 1137.20ADRC2701000 10” 1406.25ADRC2701200 12” 1761.45









Tech Sheet 10350

Tech Sheet 10352

Tech Sheet 10352

Tech Sheet 10351

Tech Sheet 10349

Tech Sheet 10348

07 Valves-3.indd 727 16/02/2015 09:15

728


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Sec

tio

n 7

– Va

lves

Weir Diaphragm Valves

Art 510, BSPTTemperature Rating:-10°C to +90°C

Ductile Iron, BSPT

0205

ADIA510050 1/2” 16 37.80ADIA510075 3/4” 16 43.25ADIA510100 1” 16 54.30ADIA510150 1.1/2” 16 82.90ADIA510250 2.1/2” 10 199.90ADIA510300 3” 10 331.55

Art 520, Flanged

Cast Iron, PN10

0205

ADIA520050 1/2” 16 67.05ADIA520075 3/4” 16 76.50ADIA520100 1” 16 86.90ADIA520150 1.1/2” 16 122.65ADIA520200 2” 16 142.40ADIA520250 2.1/2” 10 187.45ADIA520300 3” 10 253.00ADIA520400 4” 10 361.40ADIA520600 6” 10 696.50ADIA520800 8” 7 1505.35


For Rubber Flange Gasketssee page 1078

Tech Sheet 10353

Tech Sheet 10354

07 Valves-3.indd 728 16/02/2015 09:15

729

Sec

tio

n 7

– Va

lves


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Cast Iron Valves

Art 77 Full Bore Ball Valve, Flanged• ISO 5211 Direct

mounting for actuation• Brass Ball

• GG25 Cast Iron Body• PTFE Seals



ISO 5211, PN16

0205

AIVD77100LB 1” 173.20AIVD77150LB 1.1/2” 231.35AIVD77200LB 2” 261.80AIVD77250LB 2.1/2” 338.95AIVD77300LB 3” 427.65AIVD77400LB 4” 594.50AIVD77500LB 5” 1064.40AIVD77600LB 6” 1432.05AIVD77800LB 8” 3414.30

Art 235 Gate Valve, Flanged BS5150 & BS EN558-1• Stainless Steel Stem• Cast Iron Body• Bronze Seat Ring

BS EN 1092-2, PN16

0205

ACST235200 2” 326.05ACST235250 2.1/2” 427.85ACST235300 3” 498.45ACST235400 4” 734.85ACST235500 5” 969.50ACST235600 6” 1291.00ACST235800 8” 1329.50ACST2351000 10” 2310.60ACST2351200 12” 3619.50

Art 210 Gate Valves, Flanged• Brass Stem• Cast Iron Body• Bronze Seat Ring

BS 3464, BS 10 Table E & D

0205

ACST210200 2” 297.35ACST210250 2.1/2” 341.65ACST210300 3” 423.55ACST210400 4” 659.80ACST210500 5” 827.40ACST210600 6” 1227.75ACST210800 8” 1665.10

Art 170 Swing Check Valve, Flanged• Cast Iron Body• Bronze Body Seat Ring• Bronze Disc Seat Ring

BS EN 1092-2, PN16

0205


Art 121 Wafer Check Valve• Cast Iron Body• Stainless Steel Disc• EPDM Seals

Universal Flange Mounting, PN16/10 & ASA 150

0205

ACSC121200 2” 79.70ACSC121250 2.1/2” 128.85ACSC121300 3” 128.35ACSC121400 4” 226.85ACSC121500 5” 263.70ACSC121600 6” 443.35ACSC121800 8” 678.55ACSC1211000 10” 1004.55ACSC1211200 12” 1583.05

Art 185 Y Strainer, Flanged• Cast Iron Body• Stainless Steel Screen

BS EN 1092-2 PN16

0205













07 Valves-3.indd 729 16/02/2015 09:16

NAMUR Solenoid Valves VII

Standard Explosion ProofExplosion Proof ATEX Ex Instrinsically Safe

➤ For use with compressed air (lubricated or non-lubricated), instrument air and nitrogen

➤ 5/2 and 3/2 function selectable via 180º rotation of single adaptor plate for use on both single and double acting actuators

➤ Corrosion resistant construction with standard manual override

➤ Direct mounting conforms to NAMUR VDI/VDE 3845 standard

➤ Exhaust feedback - provides spring chamber with instrument air preventing corrosion

➤ Unique patented Poppet valve technology provides high fl ow, fast response, high temperature range and multi-million cycle life reliability

Features & Benefi ts➤ Control of quarter-turn

and linear process valve actuators

➤ Control of diaphragm valves

➤ General automation

➤ Compressed air, lubricated or non-lubricated

➤ Instrument air

➤ Nitrogen

Application

Media

Puretorq Solenoid Valve➤ Patented Poppet valve design minimises

friction by utilising dual static rolling diaphragm-poppet seals

➤ Advantage of this design is its suitability for cryogenic environments. Wide operating temperature range -4ºF to +140ºF (-20ºC to +60ºC) (Atex upto +122ºF)

Typical O-Ring Seal Design➤ Traditional solenoid valves

operate a spool to direct airfl ow

➤ The O-ring type seals are subject to contant abrasion, reducing their lifetime and reliability

➤ The operating temperature is usually limited to no less than -5ºC

Patented Poppet Valve DesignComparison Overview

www.puretorq.com730

07 Valves-3.indd 730 16/02/2015 09:16

731

Sec

tio

n 7

– Va

lves


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Solenoid Valves

Technical: • Corrosion resistant construction with standard manual override.• Direct mounting conforms to NAMUR VDI/VDE 3845 standard.• 5/2 and 3/2 function selectable via 180° rotation of single adaptor plate.

NAMUR Solenoid Valves VII


Standard, 1/4” BSPP

0332

VSK-NCE0-AC110 110V AC 54.10VSK-NCE0-AC220 220V AC 54.10VSK-NCE0-DC024 24V DC 54.10VSK-NCE0-AC024 24V AC 54.10

ATEX Ex, 1/4” BSPP

0332

VAK-NCN0-AC120 120V AC 186.70VAK-NCN0-AC230 230V AC 186.70VAK-NCN0-DC024 24V DC 186.70

Explosion Proof, 1/4” BSPP

0332

VEK-NCN0-AC120 120V AC 186.70VEK-NCN0-AC230 230V AC 186.70VEK-NCN0-DC024 24V DC 186.70

Instrinsically Safe, 1/4: BSPP

0332

VIK-NSN0-DC024 24V DC 197.35

07 Valves-3.indd 731 16/02/2015 09:16

ACTUATORS& ACTUATED BALL VALVES

• Double Acting & Single Acting• ISO 5211 Mounting Pad• Rack and Pinion Design• Long Life• NAMUR Interface

Temperature Range:-20ºC to +80ºC

Working Pressure:2.5 bar to 8 bar

KELM’s™ ongoing investment in technology and resource builds Trust and Confi dence in the marketplace, assuring continuity in all aspects of Engineering Distinction.

Double Acting Actuated Ball Valve Assembly

Single Acting Actuated Ball Valve Assembly

Double Acting Actuator

www.kelm-uk.com

732

07 Valves-3.indd 732 16/02/2015 09:16

DesignInnovative and patented rack and pinion pneumatic actuators, available in double acting and spring return options. Each actuator features a top mount multi-function indicator with open-close stop adjustment as standard. In addition, state-of-the-art engineering has enabled a reduction in the size of actuator without losing any torque.

Fluid Dry or Lubricated Air (to be filtered by 30 um filter element)

Operating Pressure 0.25Mpa (36psi) to 0.8Mpa (114psi)

Temperature 20°C to +80°C

Travel Adjustment ±5° at 0° & 90°

Mounting Standard

Air supply connection is designed in accordance with NAMUR standards to install solenoid valves.

The NAMUR drive pinion and the NAMUR top mounting connection permit direct installation of accessories such as limit switch boxes and positioners.

Bottom mounting connection is designed in accordance with ISO5211 and DIN3337 standards for direct mounting with valve gear boxes or mounting brackets.

Structure1 Indicator – Position indicator with NAMUR is convenient

for mounting accessories such as limit switch box, positioners, etc.

2 Pinion – The high-precision and integrative pinion is made from nickel alloy steel and fully conforms to the latest standards of ISO5211, DIN3337 NAMUR. The dimensions can be customised and stainless steel option is available.

3 Actuator body – Extruded aluminium alloy ASTM6005 body.

4 End caps – Die-casting aluminium powder polyester painted in black.

5 Pistons – The twin rack pistons are made from die casting aluminium treated with a hard anodised coating or made from cast steel with galvanisation. Features and benefits include; symmetric mounting position, long life cycle and fast operation. Rotation can be reversed by simply inverting the pistons.

6 Travel adjustment – The two independent external travel stop adjustment bolts can be altered at both open and closed directions easily and precisely.

7 High performance springs – Pre-loaded coated springs are made from a high quality marerial for improved corrosion resistance and enhanced life cycle. Can be demounted safely and conveniently to satisfy different torque requirements by changing quantity of springs.

8 Bearings and guides – Made from low friction, long-life compound material, to avoid the direct contact between metals. Maintenance and replacement is easy and convenient.

9 O-rings – NBR rubber O-rings provide trouble-free operation at standard temperature ranges. For high and low temperature, viton or silicone is used.

www.kelm-uk.com

ActuationRotary Actuators Technical InformationSpecification

733

07 Valves-3.indd 733 16/02/2015 09:16

734


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Sec

tio

n 7

– Va

lves

Rotary Actuators

Double Acting Actuators Tech Sheet 10140

Aluminium

0364

KRT007DA 32 55.90KRT012DA 40 79.80KRT020DA 52 104.85KRT035DA 63 96.35KRT050DA 75 155.60KRT075DA 83 178.40KRT110DA 92 225.45KRT160DA 105 270.00KRT255DA 125 381.80KRT435DA 140 517.20KRT665DA 160 707.00KRT1000DA 190 1128.90KRT1200DA 210 1311.05KRT1800DA 240 2199.75KRT2700DA 270 3075.25KRT3800DA 300 5194.15KRT5700DA 350 7300.10

Single Acting Actuators Tech Sheet 10141

Aluminium

0364

KRT020SRK10 52 117.70KRT035SRK10 63 148.20KRT050SRK10 75 178.40KRT075SRK10 83 211.50KRT110SRK10 92 263.00KRT160SRK10 105 318.60KRT255SRK10 125 457.20KRT435SRK10 140 665.80KRT665SRK10 160 947.25KRT1000SRK10 190 1416.95KRT1200SRK10 210 1662.70KRT1800SRK10 240 2625.80KRT2700SRK10 270 3718.30KRT3800SRK10 300 5976.95KRT5700SRK10 350 8402.95

Limit Switch Boxes

NAMUR Standard, Stainless Steel Shaft & Bracket

0364

KLS-820M 42.30

Media: Dry or lubricated compressed air, to be fi ltered by a 30µm fi lter element

Travel Adjustment: +5º on the rotation 0º and 90º


Maximum Working Pressure:2.5 to 8 bar

Captive cover boltsEasy mountingIP67

Tech Sheet 10142

For ISO Pads see page 687 & page 704

07 Valves-3.indd 734 16/02/2015 09:16

735

Sec

tio

n 7

– Va

lves


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Actuated Process Ball Valves

Nickel Plated Brass Body Ball Valves Tech Sheet 10145

Double Acting, Aluminium Actuator, BSPP

0364

2184-0000 3/8” 90.952184-0001 1/2” 94.252184-0002 3/4” 105.252184-0003 1” 121.702184-0004 1.1/4” 165.502184-0005 1.1/2” 227.802184-0006 2” 299.05

Tech Sheet 10146

Single Acting, Aluminium Actuator, BSPP

0364

2184-0007 3/8” 152.752184-0008 1/2” 156.052184-0009 3/4” 167.052184-0010 1” 183.502184-0011 1.1/4” 227.302184-0012 1.1/2” 326.352184-0013 2” 397.60

Nickel Plated Brass Body Ball Valves, WRAS Approved Tech Sheet 10147


0364

2184-0014 1/2” 94.252184-0015 3/4” 105.252184-0016 1” 121.702184-0017 1.1/4” 165.502184-0018 1.1/2” 244.302184-0019 2” 315.60

Tech Sheet 10148


0364

2184-0020 1/2” 156.052184-0021 3/4” 167.052184-0022 1” 183.502184-0023 1.1/4” 227.302184-0024 1.1/2” 326.352184-0025 2” 397.60

ActuatorMedia: Dry or lubricated compressed air, to be fi ltered by a 30µm fi lter elementTravel Adjustment: +5º on the rotation 0º and 90º

Ball ValveFull Bore

Actuator Working Temperature:-20°C to +80°CBall Valve Working Temperature:-20°C to +95°C

Actuator Working Pressure:2.5 to 8 barBall Valve Maximum Working Pressure:3/8” 16 bar1/2” to 2” 40 bar

For more Ball Valve Assemblies options, please contact our Business Development Team

07 Valves-4.indd 735 16/02/2015 09:19

736


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Sec

tio

n 7

– Va

lves


2 Piece Stainless Steel Body Ball Valves

Tech Sheet 10149


0364

2184-0026 1/4” 102.302184-0027 3/8” 102.302184-0028 1/2” 151.202184-0029 3/4” 161.752184-0030 1” 184.302184-0031 1.1/4” 208.352184-0032 1.1/2” 248.552184-0033 2” 301.30

Tech Sheet 10150


0364

2184-0034 1/4” 164.102184-0035 3/8” 164.102184-0036 1/2” 164.102184-0037 3/4” 174.652184-0038 1” 197.202184-0039 1.1/4” 251.702184-0040 1.1/2” 291.902184-0041 2” 383.30

3 Piece Stainless Steel Body Ball Valves

Tech Sheet 10151


0364

2184-0042 1/4” 117.102184-0043 3/8” 114.802184-0044 1/2” 128.252184-0045 3/4” 155.502184-0046 1” 205.002184-0047 1.1/4” 205.402184-0048 1.1/2” 236.902184-0049 2” 357.652184-0050 2.1/2” 765.402184-0051 3” 1141.752184-0052 4” 1669.20

Tech Sheet 10152


0364

2184-0053 1/4” 155.002184-0054 3/8” 152.702184-0055 1/2” 166.152184-0056 3/4” 193.402184-0057 1” 248.402184-0058 1.1/4” 248.752184-0059 1.1/2” 318.952184-0060 2” 472.802184-0061 2.1/2” 858.502184-0062 3” 1373.502184-0063 4” 1856.40


Ball ValveFull Bore


Actuator Working Pressure:2.5 to 8 barBall Valve Maximum Working Pressure:70 bar (1000psi)


07 Valves-4.indd 736 16/02/2015 09:19

737

Sec

tio

n 7

– Va

lves


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics


3 Piece Stainless Steel Body Ball Valves, Socket Weld Tech Sheet 10153

Double Acting, Aluminium Actuator

0364

2184-0064 1/4” 136.802184-0065 3/8” 136.802184-0066 1/2” 125.452184-0067 3/4” 132.352184-0068 1” 174.402184-0069 1.1/4” 304.152184-0070 1.1/2” 236.902184-0071 2” 302.002184-0072 2.1/2” 765.402184-0073 3” 1141.752184-0074 4” 1904.90

Tech Sheet 10154

Single Acting, Aluminium Actuator

0364

2184-0075 1/4” 174.702184-0076 3/8” 174.702184-0077 1/2” 163.352184-0078 3/4” 170.252184-0079 1” 217.752184-0080 1.1/4” 347.502184-0081 1.1/2” 318.952184-0082 2” 417.152184-0083 2.1/2” 858.502184-0084 3” 1373.502184-0085 4” 2092.15

3 Piece Stainless Steel Body Ball Valves, Butt Weld Tech Sheet 10155

Double Acting, Aluminium Actuator

0364

2184-0086 1/4” 114.802184-0087 3/8” 128.652184-0088 1/2” 141.402184-0089 3/4” 165.702184-0090 1” 179.002184-0091 1.1/4” 205.402184-0092 1.1/2” 236.902184-0093 2” 289.952184-0094 2.1/2” 765.402184-0095 3” 786.302184-0096 4” 2401.90

Tech Sheet 10156

Single Acting, Aluminium Actuator

0364

2184-0097 1/4” 152.702184-0098 3/8” 166.552184-0099 1/2” 179.302184-0100 3/4” 203.602184-0101 1” 222.402184-0102 1.1/4” 248.752184-0103 1.1/2” 318.952184-0104 2” 405.102184-0105 2.1/2” 858.502184-0106 3” 1018.052184-0107 4” 2589.10


Ball ValveFull Bore


Actuator Working Pressure:2.5 to 8 barBall Valve Maximum Working Pressure:70 bar (1000psi)


07 Valves-4.indd 737 16/02/2015 09:19

SOLENOID VALVES

Pilot Operated 2/2:• Normally Open• Normally Closed • DIN Connectors• Valve Timers• DC & AC Coils• Available in sizes 3/8" to 2" BSPP• Media: Oil, Air & Water

Direct Acting 2/2:• Normally Closed• DIN Connectors• DC & AC Coils• Available in sizes 1/8" to 3/8" BSPP• Available in 0-10 bar & 0 to 35 bar• High Pressure Option• Media: Oil, Air & Water

Pilot Operated 2/2 Solenoid Valve

Direct Acting 2/2 Solenoid Valve

Valve Timer

New to the KELM™ range of pneumatics, the General Purpose Brass 2/2 Solenoid Valves again show the commitment to providing Innovative and Added Value solutions to their customers

Enhanced Quality Performance

www.kelm-uk.com

738

07 Valves-4.indd 738 16/02/2015 09:19

739

Sec

tio

n 7

– Va

lves


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Pilot Operated General Purpose Solenoid Valves

Flow 55 lpmOrifi ce 13mm





Coils to Suit K225 Normally Closed Valves

Valve Timer

0366

KVT 46.35

Pressure Range:0.5 to 10 bar


Flow 540 lpm Orifi ce 50mm

Flow 400 lpm Orifi ce 38mm

2/2 Normally Closed

1/2” BSPP

0366

K225-04-230AC-NC 230/50V AC 88.00K225-04-110AC-NC 110/50V AC 88.00K225-04-24AC-NC 24/50V AC 88.00K225-04-24DC-NC 24V DC 88.00K225-04-12DC-NC 12V DC 88.00

3/4” BSPP

0366


1” BSPP

0366


1.1/4” BSPP

0366


1.1/2” BSPP

0366


2” BSPP

0366


Coil & Plug

0366

K225-230/50AC-NC 230/50V AC 26.80K225-110/50AC-NC 110/50V AC 26.80K225-24/50AC-NC 24/50V AC 26.80K225-24DC-NC 24V DC 26.80K225-12DC-NC 12V DC 26.80

3/8” BSPP

0366


07 Valves-4.indd 739 16/02/2015 09:19

740


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Sec

tio

n 7

– Va

lves

Pilot Operated General Purpose Solenoid Valves


Pressure Range:0.5 to 10 bar








Valve Timer

0366

KVT 46.35

Coils to Suit K225, Normally Open Valves

2/2 Normally Open

3/8” BSPP

0366

K225-03-230AC-NO 230/50V AC 104.50K225-03-110AC-NO 110/50V AC 104.50K225-03-24AC-NO 24/50V AC 104.50K225-03-24DC-NO 24V DC 104.50K225-03-12DC-NO 12V DC 104.50

1/2” BSPP

0366


3/4” BSPP

0366


1” BSPP

0366


1.1/4” BSPP

0366


1.1/2” BSPP

0366


2” BSPP

0366


Coil & Plug

0366

K225-230/50AC-NO 230/50V AC 26.80K225-110/50AC-NO 110/50V AC 26.80K225-24/50AC-NO 24/50V AC 26.80K225-24DC-NO 24V DC 26.80K225-12DC-NO 12V DC 26.80

07 Valves-4.indd 740 16/02/2015 09:19

741

Sec

tio

n 7

– Va

lves


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Direct Acting General Purpose Solenoid Valves

2/2 Normally Closed

Flow 3.4 lpmOrifi ce 2.5mm

Pressure Range:0 to 10 bar


1/8” BSPP

0366

K2W025-06-230AC 230/50V AC 43.35K2W025-06-110AC 110/50V AC 43.35K2W025-06-24AC 24/50V AC 43.35K2W025-06-24DC 24V DC 43.35K2W025-06-12DC 12V DC 43.35


1/4” BSPP

0366



3/8” BSPP

0366


2/2 Normally Closed, High Pressure


Pressure Range:0 to 35 bar

1/8” BSPP

0366

K2WH012-06-230AC 230/50V AC 52.00K2WH012-06-110AC 110/50V AC 52.00K2WH012-06-24AC 24/50V AC 52.00K2WH012-06-24DC 24V DC 52.00K2WH012-06-12DC 12V DC 52.00


1/4” BSPP

0366


Flow 1.7 lpmOrifi ce 2mm

3/8” BSPP

0366


Coils to Suit K2W Direct Acting Valves

Coil & Plug, Normally Closed to Suit 1/8”, 1/4” BSPP

0366

K2W-08-230/50AC 230/50V AC 26.80K2W-08-110/50AC 110/50V AC 26.80K2W-08-24/50AC 24/50V AC 26.80K2W-08-24DC 24V DC 26.80K2W-08-12DC 12V DC 26.80

Coil & Plug, Normally Closed to Suit 3/8” BSPP

0366

K2W-040-230/50AC 230/50V AC 26.80K2W-040-110/50AC 110/50V AC 26.80K2W-040-24/50AC 24/50V AC 26.80K2W-040-24DC 24V DC 26.80K2W-040-12DC 12V DC 26.80

07 Valves-4.indd 741 16/02/2015 09:19

Construction:Body: 316 Stainless SteelActuator: PA Nylon or 316 Stainless Steel

Operation:• Normally Open• Normally Closed

Features:• Maintenance free

actuator• Long life piston rings• Easy installation• 360º positional

actuator head• Leak free after fi ve

million cycles• Compact Design• Fast response• Water hammer-free• Cost effective against

other materials

Applications:• Food & Beverage Plants• Textile Factories• Pharmaceuticals

Manufacture• Laundries• Water & Sewage Plants• Petrochemical Plants• Automotive Sites

Working Pressure Range:3-16 bar

Working Temperature:Medium Temp-10°C to +180°CEnvironmental TempPA Nylon -10°C to +60°CStainless Steel 110°C to +80°C www.kelm-uk.com

ANGLE SEAT VALVESSTAINLESS STEEL BODY

07 Valves-4.indd 742 16/02/2015 09:19

743

Sec

tio

n 7

– Va

lves


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Pilot Operated Angle Seat Valves

316 Stainless Steel Valve, PA Nylon Actuator

Compact design, available in both Normally Open and Normally Closed options.Normally Closed - Closes with the fl ow.Normally Open - Closes against the fl ow.High fl ow.360° Actuator housing rotation.Single acting spring return.Suitable for use with Water, Oil, Air, Aggressive Media & Steam.

Working Pressure Range:3-16 bar


2 Way 63mm Actuator Normally Closed, BSPP

0381

KASV-SSP-38-NC 3/8” 135.95KASV-SSP-12-NC 1/2” 140.10KASV-SSP-34-NC 3/4” 148.30KASV-SSP-1-NC 1” 177.15KASV-SSP-114-NC 1.1/4” 255.45KASV-SSP-112-NC 1.1/2” 296.65KASV-SSP-2-NC 2” 424.35KASV-SSP-212-NC 2.1/2” 638.60KASV-SSP-3-NC 3” 939.35

2 Way 63mm Actuator Normally Open, BSPP

0381

KASV-SSP-38-NO 3/8” 135.95KASV-SSP-12-NO 1/2” 140.10KASV-SSP-34-NO 3/4” 148.30KASV-SSP-1-NO 1” 177.15KASV-SSP-114-NO 1.1/4” 255.45KASV-SSP-112-NO 1.1/2” 296.65KASV-SSP-2-NO 2” 424.35KASV-SSP-212-NO 2.1/2” 638.60KASV-SSP-3-NO 3” 939.35

316 Stainless Steel Valve, Stainless Steel Actuator

2 Way 63mm Actuator Normally Closed, BSPP

0381

KASV-SSSS-38-NC 3/8” 168.90KASV-SSSS-12-NC 1/2” 177.15KASV-SSSS-34-NC 3/4” 189.50KASV-SSSS-1-NC 1” 206.00KASV-SSSS-114-NC 1.1/4” 346.10KASV-SSSS-112-NC 1.1/2” 379.05KASV-SSSS-2-NC 2” 490.30KASV-SSSS-212-NC 2.1/2” 745.70

2 Way 63mm Actuator Normally Open, BSPP

0381

KASV-SSSS-38-NO 3/8” 168.90KASV-SSSS-12-NO 1/2” 177.15KASV-SSSS-34-NO 3/4” 189.50KASV-SSSS-1-NO 1” 206.00KASV-SSSS-114-NO 1.1/4” 346.10KASV-SSSS-112-NO 1.1/2” 379.05KASV-SSSS-2-NO 2” 490.30KASV-SSSS-212-NO 2.1/2” 745.70

Material:Body: 316L Stainless SteelActuator: 316L Stainless SteelSeals: PTFE

Material:Body: 316L Stainless SteelActuator: PASeals: PTFE

Working Temperature:Medium Temp-10°C to +180°CEnvironmental TempPA Nylon -10°C to +60°CStainless Steel 110°C to +80°C

07 Valves-4.indd 743 16/02/2015 09:19

744


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Sec

tio

n 7

– Va

lves

Solenoid Valves

General Purpose 2/2 N/C, Pilot Operated Solenoid Valves3/8”-1” WRAS Approved. EPDM Seal1.1/2-2” - Buna N

Tech Sheet 1977

BSPP

0030

L182D01-38-230 3/8” 230/50 6 VA 13.5 2.5 0.35 - 16 B10AA 100.40L182D01-38-110 3/8” 110/50 6 VA 13.5 2.5 0.35 - 16 B10AC 100.40L182D01-38-2450 3/8” 24/50 6 VA 13.5 2.5 0.35 - 16 B10AE 100.40L182D01-38-24 3/8” 24V DC 5.5 W 13.5 2.5 0.35 - 16 B10AL 100.40L182D01-12-230 1/2” 230/50 6 VA 13.5 3.8 0.35 - 16 B10AA 105.25L182D01-12-110 1/2” 110/50 6 VA 13.5 3.8 0.35 - 16 B10AC 105.25L182D01-12-2450 1/2” 24/50 6 VA 13.5 3.8 0.35 - 16 B10AE 105.25L182D01-12-24 1/2” 24V DC 5.5 W 13.5 3.8 0.35 - 16 B10AL 105.25L182D01-34-230 3/4” 230/50 6 VA 18 5 0.35 - 12 B10AA 133.20L182D01-34-110 3/4” 110/50 6 VA 18 5 0.35 - 12 B10AC 133.20L182D01-34-2450 3/4” 24/50 6 VA 18 5 0.35 - 12 B10AE 133.20L182D01-34-24 3/4” 24V DC 5.5 W 18 5 0.35 - 12 B10AL 133.20L182D01-1-230 1” 230/50 6 VA 24 12 0.35 - 12 B10AA 203.25L182D01-1-110 1” 110/50 6 VA 24 12 0.35 - 12 B10AC 203.25L182D01-1-2450 1” 24/50 6 VA 24 12 0.35 - 12 B10AE 203.25L182D01-1-24 1” 24V DC 5.5 W 24 12 0.35 - 12 B10AL 203.25L180B48-112-230 1.1/2” 230/50 14 VA 45 27 0.5 - 10 A30AA 408.90L180B48-112-110 1.1/2” 110/50 14 VA 45 27 0.5 - 10 A30AC 408.90L180B48-112-2450 1.1/2” 24/50 14 VA 45 27 0.5 - 10 A30AE 408.90L180B48-112-24 1.1/2” 24V DC 9 W 45 27 0.5 - 10 A30AL 408.90L180B48-2-230 2” 230/50 14 VA 45 34 0.5 - 10 A30AA 476.75L180B48-2-110 2” 110/50 14 VA 45 34 0.5 - 10 A30AC 476.75L180B48-2-2450 2” 24/50 14 VA 45 34 0.5 - 10 A30AE 476.75L180B48-2-24 2” 24V DC 9 W 45 34 0.5 - 10 A30AL 476.75

General Purpose 2/2 N/O, Pilot Operated Solenoid Valves Tech Sheet

1978

BSPP

0030

L282B01-38-230 3/8” 230/50 6 VA 13.5 2.5 0.35 - 12 B10AA 125.95L282B01-38-110 3/8” 110/50 6 VA 13.5 2.5 0.35 - 12 B10AC 125.95L282B01-38-2450 3/8” 24/50 6 VA 13.5 2.5 0.35 - 12 B10AE 125.95L282B01-38-24 3/8” 24V DC 5.5 W 13.5 2.5 0.35 - 12 C10AL 125.95L282B01-12-230 1/2” 230/50 6 VA 13.5 3.8 0.35 - 12 B10AA 127.80L282B01-12-110 1/2” 110/50 6 VA 13.5 3.8 0.35 - 12 B10AC 127.80L282B01-12-2450 1/2” 24/50 6 VA 13.5 3.8 0.35 - 12 B10AE 127.80L282B01-12-24 1/2” 24V DC 5.5 W 13.5 3.8 0.35 - 12 C10AL 127.80L282B01-34-230 3/4” 230/50 6 VA 18 5 0.35 - 12 B10AA 161.00L282B01-34-110 3/4” 110/50 6 VA 18 5 0.35 - 12 B10AC 161.00L282B01-34-2450 3/4” 24/50 6 VA 18 5 0.35 - 12 B10AE 161.00L282B01-34-24 3/4” 24V DC 5.5 W 18 5 0.35 - 12 C10AL 161.00L282B01-1-230 1” 230/50 6 VA 24 12 0.35 - 12 B10AA 222.05L282B01-1-110 1” 110/50 6 VA 24 12 0.35 - 12 B10AC 222.05L282B01-1-2450 1” 24/50 6 VA 24 12 0.35 - 12 B10AE 222.05L282B01-1-24 1” 24V DC 5.5 W 24 12 0.35 - 12 C10AL 222.05L280B48-112-230 1.1/2” 230/50 14 VA 45 27 0.5 - 10 A30AA 452.90L280B48-112-110 1.1/2” 110/50 14 VA 45 27 0.5 - 10 A30AC 452.90L280B48-112-2450 1.1/2” 24/50 14 VA 45 27 0.5 - 10 A30AE 452.90L280B48-112-24 1.1/2” 24V DC 9 W 45 27 0.5 - 10 A30AL 452.90L280B48-2-230 2” 230/50 14 VA 45 34 0.5 - 10 A30AA 511.45L280B48-2-110 2” 110/50 14 VA 45 34 0.5 - 10 A30AC 511.45L280B48-2-2450 2” 24/50 14 VA 45 34 0.5 - 10 A30AE 511.45L280B48-2-24 2” 24V DC 9 W 45 34 0.5 - 10 A30AL 511.45

For Reinforced PVC Braided Hose Type RPVC (to BS6066)see pages 1114-1115

07 Valves-4.indd 744 16/02/2015 09:19

745

Sec

tio

n 7

– Va

lves


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Solenoid Valves

General Purpose 2/2 N/C, Direct Acting Solenoid Valves

1/8”-1/4”

Tech Sheet 870, 871 & 863

BSPP

0030

L172V03-18-230 1/8” 230/50 6VA 2 0.11 0-15 B10AA 56.85L172V03-18-110 1/8” 110/50 6VA 2 0.11 0-15 B10AC 56.85L172V03-18-2450 1/8” 24/50 6VA 2 0.11 0-15 B10AE 56.85L172V03-18-24 1/8” 24V DC 5.5W 2 0.11 0-6 B10AL 56.85L121V02-14-230 1/4” 230/50 14VA 2.3 0.15 0-20 A30AA 63.40L121V02-14-110 1/4” 110/50 14VA 2.3 0.15 0-20 A30AC 63.40L121V02-14-2450 1/4” 24/50 14VA 2.3 0.15 0-20 A30AE 63.40L121V02-14-24 1/4” 24V DC 9W 2.3 0.15 0-16 A30AL 63.40L133B01-38-230 3/8” 230/50 14VA 10 1.5 0-10 530AA 95.30L133B01-38-110 3/8” 110/50 14VA 10 1.5 0-10 530AC 89.65L133B01-38-2450 3/8” 24/50 14VA 10 1.5 0-10 530AE 89.65L133B01-38-24 3/8” 24V DC 9W 10 1.5 0-3 530AL 95.30

Steam & Hot Water 2/2 N/C, Pilot Operated Solenoid Valves Tech Sheet

864

BSPP

0030

L145R2-12-230 1/2” 230/50 10VA 10 2.5 0.4-8 614AA 148.50L145R2-12-110 1/2” 110/50 10VA 10 2.5 0.4-8 614AC 143.60L145R2-12-24 1/2” 24V AC 10VA 10 2.5 0.4-8 614AE 148.50L145R4-34-230 3/4” 230/50 14VA 16 4.5 0.4-6 534AA 185.20L145R4-34-110 3/4” 110/50 14VA 16 4.5 0.4-6 534AC 185.20L145R2-1-230 1” 230/50 14VA 18.5 18.5 0.4-6 534AA 254.00L145R2-1-110 1” 110/50 14VA 18.5 18.5 0.4-6 534AC 259.55

General Purpose 3/2 N/C, Direct Acting Solenoid Valves

Tech Sheet 868 & 869

BSPP

0030

L372V03-18-230 1/8” 230/50 6VA 1.6 0.08 0-10 B10AA 66.05L372V03-18-110 1/8” 110/50 6VA 1.6 0.08 0-10 B10AC 66.05L372V03-18-2450 1/8” 24/50 6VA 1.6 0.08 0-10 B10AE 66.05L372V03-18-24 1/8” 24V DC 5.5W 1.6 0.08 0-10 B10AL 66.05L321B02C-14-230 1/4” 230/50 14VA 2.3 0.14 0-8 A30AA 77.60L321B02C-14-110 1/4” 110/50 14VA 2.3 0.14 0-8 A30AC 77.60L321B02C-14-2450 1/4” 24/50 14VA 2.3 0.14 0-8 A30AE 85.45L321B02C-14-24 1/4” 24V DC 9W 2.3 0.14 0-8 A30EL 78.40

Peter Paul Stainless Steel 2/2 N/C, Direct Acting Solenoid Valves

NPT

0030

22N9DEM-24 1/4” 24V DC 9.5W 3.2 0.214 0 7 137.30

3/8”-1

0030

L133B07-12-230 1/2” 230/50 24VA 12.5 2.1 0-10 130AA 125.75L133B07-12-110 1/2” 110/50 24VA 12.5 2.1 0-10 130AC 125.75L133B07-12-2450 1/2” 24/50 24VA 12.5 2.1 0-10 130AE 125.75L133B07-12-24 1/2” 24V DC 13W 12.5 2.1 0-3 130AL 125.75L133B07-34-230 3/4” 230/50 24VA 17 4.5 0-10 130AA 161.40L133B07-34-110 3/4” 110/50 24VA 17 4.5 0-10 130AC 119.60L133B07-34-2450 3/4” 24/50 24VA 17 4.5 0-10 130AE 119.60L133B07-34-24 3/4” 24V DC 13W 17 4.5 0-3 130AL 161.40L133B06-1-230 1” 230/50 33VA 24 9 0-10 923EA 189.65L133B06-1-110 1” 110/50 33VA 24 9 0-10 923EC 256.00L133B06-1-2450 1” 24/50 33VA 24 9 0-10 923EE 177.80L133B06-1-24 1” 24V DC 17W 24 9 0-3 923AL 256.00

07 Valves-4.indd 745 16/02/2015 09:19

746


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Sec

tio

n 7

– Va

lves

Solenoid Valves

Stainless Steel 2/2 N/C, Direct Acting Solenoid ValvesMaterials in contact with Fluids.Body: Stainless Steel AISI 316Sealing: FPMInternal Components: Stainless SteelSeat: Stainless Steel AISI 316Core Tube: Stainless SteelShading Coil: Copper

Supplied with DIN Plugs

Tech Sheet 2121, 2122 & 2123

BSPP

0030

L172V07-18-23050 1/8” 230/50 12VA 1.6 0.08 0 - 20 B12AA 92.10L172V07-18-11050 1/8” 110/50 12VA 1.6 0.08 0 - 20 B12AC 92.10L172V07-18-2450 1/8” 24/50 12VA 1.6 0.08 0 - 20 B12AE 92.10L172V07-18-24 1/8” 24V DC 5.5W 1.6 0.08 0 - 12 B12AL 92.10L176V07-14-23050 1/4” 230/50 12VA 2.4 0.16 0 - 15 C12AA 126.30L176V07-14-11050 1/4” 110/50 12VA 2.4 0.16 0 - 15 C12AC 126.30L176V07-14-2450 1/4” 24/50 12VA 2.4 0.16 0 - 8 C12AE 126.30L176V07-14-24 1/4” 24V DC 5.5W 2.4 0.16 0 - 8 C12AE 126.30L182V09-38-23050 3/8” 230/50 12VA 13.5 2.5 0.35 - 16 B12AA 347.15L182V09-38-11050 3/8” 110/50 12VA 13.5 2.5 0.35 - 16 B12AC 347.15L182V09-38-2450 3/8” 24/50 12VA 13.5 2.5 0.35 - 16 B12AE 347.15L182V09-38-24 3/8” 24V DC 5.5W 13.5 2.5 0.35 - 16 B12AL 347.15L182V09-12-23050 1/2” 230/50 12VA 13.5 3.8 0.35 - 16 B12AA 364.80L182V09-12-11050 1/2” 110/50 12VA 13.5 3.8 0.35 - 16 B12AC 364.80L182V09-12-2450 1/2” 24/50 12VA 13.5 3.8 0.35 - 16 B12AE 364.80L182V09-12-24 1/2” 24V DC 5.5W 13.5 3.8 0.35 - 16 B12AL 364.80L182V09-34-23050 3/4” 230/50 12VA 18 5 0.35 - 16 B12AA 448.85L182V09-34-11050 3/4” 110/50 12VA 18 5 0.35 - 16 B12AC 448.85L182V09-34-2450 3/4” 24/50 12VA 18 5 0.35 - 16 B12AE 448.85L182V09-34-24 3/4” 24V DC 5.5W 18 5 0.35 - 16 B12AL 448.85L182V09-1-23050 1” 230/50 12VA 24 11 0.35 - 16 B12AA 541.30L182V09-1-11050 1” 110/50 12VA 24 11 0.35 - 16 B12AC 541.30L182V09-1-2450 1” 24/50 12VA 24 11 0.35 - 16 B12AE 541.30L182V09-1-24 1” 24V DC 5.5W 24 11 0.35 - 16 B12AL 541.30

Stainless Steel 2/2 N/O, Pilot Operated Solenoid ValvesMaterials in contact with Fluids.Body: Stainless Steel AISI 316Sealing: FPMInternal Components: Stainless SteelSeat: Stainless Steel AISI 316Core Tube: Stainless SteelShading Coil: Copper

Supplied with DIN Plugs

Tech Sheet 2154

BSPP

0030

L282V09-38-23050 3/8” 230/50 12VA 13.5 2.5 0.35 - 16 B12AA 409.15L282V09-38-11050 3/8” 110/50 12VA 13.5 2.5 0.35 - 16 B12AC 409.15L282V09-38-2450 3/8” 24/50 12VA 13.5 2.5 0.35 - 16 B12AE 409.15L282V09-38-24 3/8” 24V DC 5.5W 13.5 2.5 0.35 - 16 B12AL 409.15L282V09-12-23050 1/2” 230/50 12VA 13.5 3.8 0.35 - 16 B12AA 442.20L282V09-12-11050 1/2” 110/50 12VA 13.5 3.8 0.35 - 16 B12AC 442.20L282V09-12-2450 1/2” 24/50 12VA 13.5 3.8 0.35 - 16 B12AE 442.20L282V09-12-24 1/2” 24V DC 5.5W 13.5 3.8 0.35 - 16 B12AL 442.20L282V09-34-23050 3/4” 230/50 12VA 18 5 0.35 - 16 B12AA 536.80L282V09-34-11050 3/4” 110/50 12VA 18 5 0.35 - 16 B12AC 536.80L282V09-34-2450 3/4” 24/50 12VA 18 5 0.35 - 16 B12AE 536.80L282V09-34-24 3/4” 24V DC 5.5W 18 5 0.35 - 16 B12AL 536.80L282V09-1-23050 1” 230/50 12VA 24 11 0.35 - 16 B12AA 640.85L282V09-1-11050 1” 110/50 12VA 24 11 0.35 - 16 B12AC 640.85L282V09-1-2450 1” 24/50 12VA 24 11 0.35 - 16 B12AE 640.85L282V09-1-24 1” 24V DC 5.5W 24 11 0.35 - 16 B12AL 640.85

For Stainless Steel Tube see page 134

07 Valves-4.indd 746 16/02/2015 09:19

747

Sec

tio

n 7

– Va

lves


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Solenoid Valves

Steam & Hot Water 2/2 N/C, Direct Acting Solenoid Valves Tech Sheet

865

BSPP

0030

L153D07-12-230 1/2” 230/50 12VA 11.5 2.1 0-8 134AA 212.50L153D07-12-110 1/2” 110/50 12VA 11.5 2.1 0-8 134AC 157.40L153D07-12-24 1/2” 24V AC 12VA 11.5 2.1 0-8 134AE 157.40L153D07-34-230 3/4” 230/50 12VA 17 5 0-8 134AA 248.30L153D07-34-110 3/4” 110/50 12VA 17 5 0-8 134AC 184.90L153D07-34-24 3/4” 24V AC 12VA 17 5 0-8 134AE 183.90L153D5-1-230 1” 230/50 27VA 22 8.5 0-8 934AA 293.35L153D5-1-110 1” 110/50 27VA 22 8.5 0-8 934AC 275.70L153D5-1-24 1” 24V AC 27VA 22 8.5 0-8 934AE 293.35

DIN Plug

To Suit Sirai Valves

0030

122 122 Coil 2.30182 182 Coil 2.30

Replacement Coils

To Suit Sirai Valves

0030

823AA 230/50 122 33.05823AC 110/50 122 30.00823AL 24V DC 122 36.45830AE 24/50 122 36.45A30AA 230/50 182 35.20A30AC 110/50 182 34.05A30AE 24/50 182 34.05A30AL 24V DC 182 34.05B10AA 230/50 122 35.70B10AC 110/50 122 33.05B10AE 24/50 122 30.90B10AL 24V DC 122 33.05530AA 230/50 182 42.85530AC 110/50 182 42.85530AL 24V DC 182 42.85130AA 230/50 182 59.95130AC 110/50 182 52.95130AE 24/50 182 62.05130AL 24V DC 182 52.95923EA 230/50 182 81.35923EC 110/50 182 79.10923EE 24/50 182 84.00923AL 24V DC 182 81.35614AA 230/50 122 37.90614AC 110/50 122 40.30614AE 24V AC 122 37.90534AA 230/50 182 56.80534AC 110/50 182 53.35534AE 24V AC 182 53.35134AA 230/50 182 72.90134AC 110/50 182 68.50134AE 24V AC 182 72.90934AA 230/50 182 93.70934AC 110/50 182 93.70934AE 24V AC 182 93.70610AA 230/50 122 44.25610AC 110/50 122 34.75610AE 24/50 122 36.00610AL 24V DC 122 34.75

07 Valves-4.indd 747 16/02/2015 09:19

748


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Sec

tio

n 7

– Va

lves

Process Valves

Brass Ball Valves, 2 Way Pneumatic Actuation, Low Pressure• ISO 5211 Mounting Pad

• ISO 5211 Mounting Pad



Working Temperature:Actuator:-20°C to +80°C (Dry Air)Valve:-20°C to +150°C




Tech Sheet 854

Double Acting, BSPP

0129

D100H003 3/8” 141.95D100H004 1/2” 149.35D100H005 3/4” 151.15D100H006 1” 161.00D100H007 1.1/4” 171.00D100H008 1.1/2” 189.60D100H009 2” 241.10

Tech Sheet 859

Single Acting, BSPP

0129

S100H003 3/8” 179.50S100H004 1/2” 186.80S100H005 3/4” 181.50S100H006 1” 205.30S100H007 1.1/4” 205.80S100H008 1.1/2” 247.70S100H009 2” 330.60

Brass Ball Valves, 2 Way Pneumatic Actuation, High Pressure

Tech Sheet 855

Double Acting, BSPP

0129

D101H003 3/8” 141.50D101H004 1/2” 147.60D101H005 3/4” 148.80D101H006 1” 162.65D101H007 1.1/4” 190.25D101H008 1.1/2” 223.85D101H009 2” 271.70D101H010 2.1/2” 414.20D101H011 3” 590.30

Tech Sheet 10144

Single Acting, BSPP

0129

S101H003 3/8” 178.15S101H004 1/2” 181.20S101H005 3/4” 184.30S101H006 1” 191.25S101H007 1.1/4” 241.50S101H008 1.1/2” 261.25S101H009 2” 351.15S101H010 2.1/2” 560.60S101H011 3” 802.25

07 Valves-4.indd 748 16/02/2015 09:19

749

Sec

tio

n 7

– Va

lves


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Process Valves

NAMUR Interface PlatesFor use with Omal Pneumatic valves when used in conjunction with NAMUR valves.

Aluminum

0129

KBN17030 Type 1 13.70KBN10015 Type 2 13.70KBN10008 Type 3 13.70

3/2 5/2 NAMUR Mount Solenoid ValvesTop face air connection. Screwdriver manual override. Protection to IP 65. Cv Factor 0.7.

Valve & Coil

0030

R1518A 1/4” 230/50 95.30R1519C 1/4” 110/50 82.65R1520E 1/4” 24/50 82.65R1521L 1/4” 24V DC 110.80

Stainless Steel Ball Valves, 2 Way Pneumatic Actuation, High Pressure


Tech Sheet 858

Double Acting, BSPP

0129

D400H003 3/8” 207.80D400H004 1/2” 254.00D400H005 3/4” 236.80D400H006 1” 260.25D400H007 1.1/4” 318.95D400H008 1.1/2” 389.95D400H009 2” 484.65

Single Acting, BSPP

0129

S400H003 3/8” 248.55S400H004 1/2” 255.40S400H005 3/4” 308.60S400H006 1” 332.05S400H007 1.1/4” 420.40S400H008 1.1/2” 496.55S400H009 2” 637.25


Tech Sheet 858

Tech Sheet 10373

07 Valves-4.indd 749 16/02/2015 09:19

750


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Sec

tio

n 7

– Va

lves

PVC Ball Valves, Pneumatic ActuationNote: The valve is suitable for fl uids in the food, and chemicals industries.

Working Temperature:Actuator: -20°C to +80°C (Dry Air)Valve: 0°C to +60°C

Tech Sheet 857

Double Acting, DN

0129

D613H083 DN10 321.05D613H084 DN15 323.10D613H085 DN20 348.70D613H086 DN25 367.95D613H087 DN32 423.90D613H088 DN40 459.80D613H089 DN50 514.30D613H090 DN65 731.80D613H091 DN80 916.20D613H092 DN100 1245.50

Note: The valve is suitable for fl uids in the food, and chemicals industries.

Tech Sheet 861

Single Acting, DN

0129

S613H083 DN10 361.70S613H084 DN15 363.80S613H085 DN20 389.40S613H086 DN25 408.70S613H087 DN32 486.70S613H088 DN40 522.00S613H089 DN50 576.45S613H090 DN65 872.00S613H091 DN80 1057.70S613H092 DN100 1426.35

Working Temperature:Actuator: -20°C to +80°C (Dry Air)Valve: 0°C to +60°C

Brass Ball Valves, 3 Way L Port Pneumatic Actuation, Low Pressure


Tech Sheet 856

Double Acting, BSPP

0129

D153H003 3/8” 124.90D153H004 1/2” 130.20D153H005 3/4” 164.50D153H006 1” 218.30D153H007 1.1/4” 229.20D153H008 1.1/2” 256.15D153H009 2” 364.90


Tech Sheet 860

Single Acting, BSPP

0129

S153H003 3/8” 189.85S153H004 1/2” 197.50S153H005 3/4” 244.75S153H006 1” 223.25S153H007 1.1/4” 291.30S153H008 1.1/2” 318.25S153H009 2” 474.35

Process Valves

07 Valves-4.indd 750 16/02/2015 09:20

751

Sec

tio

n 7

– Va

lves


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Process Valves

V.I.P. Axial Flow Valves with Nitrile Seals

Tech Sheet 862Applications:Nitrile:Compatible with Air, Gas, Oils, Water etc.Viton:High compatibility with the majority of fl uids, not advised for steam.

Note: The compact design of a VIP valve with it’s reduced size and weight allows it to be used in applications, where traditional actuated valve packages can not be utilised. The VIP valve has no external moving parts, which ensures their operation is quick and effi cient, with out the safety Issues of the traditional actuated valve packages.The VIP valve with the approved gas threaded connections (UN1-ISO 7/1-DIN 2999) coupled with a NAMUR mounting plate makes this valve suitable for every possible plant application.The valve can be mounted in any position. Full technical specifi cations available on request.

V.I.P. Axial Flow Valves with Viton Seals

Stainless Steel Angle Seat Valve with NAMUR InterfaceAvailable up to 2” - alternative terminations available.


Pressure Range:0-16 bar (0-10 bar for Steam)

Tech Sheet 121

Bronze Angle Seat Valve with NAMUR Interface

IP65 Actuator Signal Box Tech Sheet

637

Available up to 2” - alternative terminations available.


Pressure Range:0-16 bar (0-10 bar for Steam)

Tech Sheet 121

Working Temperature:Nitrile:-20°C to +80°CViton:-20°C to +150°C

Double Acting, BSPP

0129

VDA10003 3/8” 87.35VDA10004 1/2” 99.40VDA10005 3/4” 118.85VDA10006 1” 130.25VDA10007 1.1/4” 174.00VDA10008 1.1/2” 198.10VDA10009 2” 276.10

Single Acting Spring Return Normally Closed, BSPP

0129

VNC10003 3/8” 93.40VNC10004 1/2” 132.20VNC10005 3/4” 122.00VNC10006 1” 140.25VNC10007 1.1/4” 189.90VNC10008 1.1/2” 211.90VNC10009 2” 328.10

Double Acting, BSPP

0129

VDA20003 3/8” 94.15VDA20004 1/2” 103.95VDA20005 3/4” 122.70VDA20006 1” 138.60VDA20007 1.1/4” 184.50VDA20008 1.1/2” 262.40VDA20009 2” 292.00

Single Acting Spring Return Normally Closed, BSPP

0129

VNC20003 3/8” 101.15VNC20004 1/2” 107.65VNC20005 3/4” 128.75VNC20006 1” 155.75VNC20007 1.1/4” 196.55VNC20008 1.1/2” 225.80VNC20009 2” 309.30

BSPP

0129

J4CPG1604 1/2” 244.20J4CPG1605 3/4” 255.75J4CPG1806 1” 285.40

BSPP

0129

J9CPG1603 3/8” 148.75J9CPG1604 1/2” 148.75J9CPG1605 3/4” 157.05J9CPG1806 1” 184.50

0030

PFA502 Stem Size 20-30mm 122.15PFA503 Stem Size 50mm 114.80

07 Valves-4.indd 751 16/02/2015 09:20

752


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Sec

tio

n 7

– Va

lves

Solenoid Valves

General Purpose 2/2 N/C Pilot Operated Solenoid ValvesMedia: Water, Oil, AirSeal: NBRSpeed Control Screw: Standard on 1.1/2” & 2”Body: BrassProtection Class: IP65 (with connector fi tted)

Media: Water, Oil, AirSeal: NBRSpeed Control Screw: Standard on 1.1/2” & 2”Body: BrassProtection Class: IP65 (with connector fi tted)

Media Temperature:-10°C to +90°C


BSPP

0030

F180-38-230 3/8” 230/50 10VA 13 55 0.3-16 2700 76.00F180-38-110 3/8” 110/50 10VA 13 55 0.3-16 2400 76.00F180-38-24 3/8” 24DC 7W 13 55 0.3-16 2250 76.00F180-12-230 1/2” 230/50 10VA 13 63 0.3-16 2700 100.05F180-12-110 1/2” 110/50 10VA 13 63 0.3-16 2400 100.05F180-12-24 1/2” 24DC 7W 13 63 0.3-16 2250 100.05F180-34-230 3/4” 230/50 10VA 21 183 0.3-16 2700 131.60F180-34-110 3/4” 110/50 10VA 21 183 0.3-16 2400 131.60F180-34-24 3/4” 24DC 7W 21 183 0.3-16 2250 131.60F180-1-230 1” 230/50 10VA 25 216 0.3-16 2700 159.85F180-1-110 1” 110/50 10VA 25 216 0.3-16 2400 159.85F180-1-24 1” 24DC 7W 25 216 0.3-16 2250 159.85F180-112-230 1.1/2” 230/50 18VA 40 480 0.5-16 7700 343.85F180-112-110 1.1/2” 110/50 18VA 40 480 0.5-16 7400 343.85F180-112-24 1.1/2” 24DC 14W 40 480 0.5-16 7250 343.85F180-2-230 2” 230/50 18VA 50 600 0.5-16 7700 380.80F180-2-110 2” 110/50 18VA 50 600 0.5-16 7400 380.80F180-2-24 2” 24DC 14W 50 600 0.5-16 7250 380.80

General Purpose 2/2 N/C Direct Acting Solenoid ValvesMedia: Water, Oil, AirSeal: FKMBody: BrassProtection Class: IP65 (with connector fi tted)


BSPP

0030

F133-18-230 1/8” 230/50 10VA 2 1.9 0-12 2700 49.40F133-18-110 1/8” 110/50 10VA 2 1.9 0-12 2400 49.40F133-18-24 1/8” 24DC 7W 2 1.9 0-9 2250 49.40F133-14-230 1/4” 230/50 18VA 3 4.5 0-15 7700 72.90F133-14-110 1/4” 110/50 18VA 3 4.5 0-15 7400 72.90F133-14-24 1/4” 24DC 14W 3 4.5 0-8 7250 72.90F133-38-230 3/8” 230/50 18VA 4 6 0-8 7700 76.35F133-38-110 3/8” 110/50 18VA 4 6 0-8 7400 76.35F133-38-24 3/8” 24DC 14W 4 6 0-5 7250 76.35

General Purpose 2/2 N/O Pilot Operated Solenoid Valves

BSPP

0030

F280-38-230 3/8” 230/50 10VA 13 55 0.3-16 2700 98.35F280-38-110 3/8” 110/50 10VA 13 55 0.3-16 2400 94.55F280-38-24 3/8” 24DC 7W 13 55 0.3-16 2250 94.55F280-12-230 1/2” 230/50 10VA 13 63 0.3-16 2700 126.05F280-12-110 1/2” 110/50 10VA 13 63 0.3-16 2400 126.05F280-12-24 1/2” 24DC 7W 13 63 0.3-16 2250 126.05F280-34-230 3/4” 230/50 10VA 25 183 0.3-16 2700 126.80F280-34-110 3/4” 110/50 10VA 25 183 0.3-16 2400 126.80F280-34-24 3/4” 24DC 7W 25 183 0.3-16 2250 126.80F280-1-230 1” 230/50 10VA 25 216 0.3-16 2700 161.80F280-1-110 1” 110/50 10VA 25 216 0.3-16 2400 161.80F280-1-24 1” 24DC 7W 25 216 0.3-16 2250 161.80F280-112-230 1.1/2” 230/50 18VA 40 480 0.5-16 7700 323.15F280-112-24 1.1/2” 24DC 14W 40 480 0.5-16 7250 323.15F280-2-230 2” 230/50 18VA 50 600 0.5-16 7700 373.10F280-2-110 2” 110/50 18VA 50 600 0.5-16 7400 373.10F280-2-24 2” 24DC 14W 50 600 0.5-16 7250 373.10

Steam/Water 2/2 N/C Pilot Operated Solenoid ValvesMedia: Steam & WaterSeal: EPDM (Main), PTFE (Diaphragm)Speed Control Screw: Standard on 1.1/2” & 2”Body: Brass (Stainless Steel Orifi ce)Protection Class: IP65 (with connector fi tted)


BSPP

0030

F153-38-230 3/8” 230/50 18VA 11.5 50 0.3-4.5 7701 121.90F153-38-110 3/8” 110/50 18VA 11.5 50 0.3-4.5 7401 121.90F153-38-24 3/8” 24DC 18W 11.5 50 0.3-4.5 7251 121.90F153-12-230 1/2” 230/50 18VA 11.5 55 0.3-4.5 7701 119.00F153-12-110 1/2” 110/50 18VA 11.5 55 0.3-4.5 7401 119.00F153-12-24 1/2” 24DC 14W 11.5 55 0.3-4.5 7251 119.00F153-34-230 3/4” 230/50 18VA 11.5 70 0.3-4.5 7701 131.05F153-34-110 3/4” 110/50 18VA 11.5 70 0.3-4.5 7401 131.05F153-34-24 3/4” 24DC 14W 11.5 70 0.3-4.5 7251 131.05F153-1-230 1” 230/50 18VA 11.5 75 0.3-4.5 7701 148.25F153-1-110 1” 110/50 18VA 11.5 75 0.3-4.5 7401 148.25F153-1-24 1” 24DC 14W 11.5 75 0.3-4.5 7251 148.25

Tech Sheet 10376

Tech Sheet 10374

Tech Sheet 10377

Tech Sheet 10375

07 Valves-4.indd 752 16/02/2015 09:20

753

Sec

tio

n 7

– Va

lves


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Solenoid Valves

Stainless Steel 2/2 N/C Direct Acting Solenoid ValvesMedia: Aggressive MediaSeal: FKMBody: Stainless SteelProtection Class: IP65 (with connector fi tted)



BSPP

0030

FSS-18-24 1/8” 24DC 14W 3 4.5 0-8 7250 98.70FSS-14-230 1/4” 230/50 18VA 3 4.5 0-15 7700 131.85FSS-14-110 1/4” 110/50 18VA 3 4.5 0-15 7400 131.85FSS-14-24 1/4” 24DC 14W 3 4.5 0-8 7250 131.85

General Purpose 3/2 N/C Direct Acting Solenoid ValvesMedia: Water, Oil, AirSeal: FKMBody: BrassProtection Class: IP65 (with connector fi tted)

BSPP

0030

F333-18-230 1/8” 230/50 18VA 2 2.2 0-10 7700 52.95F333-18-110 1/8” 110/50 18VA 2 2.2 0-10 7400 55.00F333-18-24 1/8” 24DC 14W 2 2.2 0-10 7250 55.00F333-14-230 1/4” 230/50 18VA 2 2.2 0-10 7700 77.95F333-14-110 1/4” 110/50 18VA 2 2.2 0-10 7400 77.95F333-14-24 1/4” 24DC 14W 2 2.2 0-10 7250 77.95

2/2 Way Pilot Operated Valve with Assisted LiftMedia: Water, Oil, AirNote:Other voltages available on request

Compact Version, BSPP

0030

D884DVU-230/50 1/4” 230/50 18VA 10.5 21 0-16 7700 73.70D884DVU-110/50 1/4” 110/50 18VA 10.5 21 0-16 7400 73.70D885DVU-230/50 3/8” 230/50 18VA 10.5 24 0-16 7700 73.70D885DVU-24 3/8” 24DC 14W 10.5 24 0-4.5 7250 73.70D886DVU-230/50 1/2” 230/50 18VA 10.5 25 0-16 7700 78.40D886DVU-110/50 1/2” 110/50 18VA 10.5 25 0-16 7400 78.40D886DVU-24 1/2” 24DC 14W 10.5 25 0-4.5 7250 78.40

High Flow Version, BSPP

0030

D288DBW-230/50 3/8” 230/50 18VA 15 60 0-16 7700 96.40D288DBW-110/50 3/8” 110/50 18VA 15 60 0-16 7400 96.40D288DBW-24 3/8” 24DC 14W 15 60 0-6 7250 98.05D289BW-230/50 1/2” 230/50 18VA 15 65 0-16 7700 98.05D289BW-110/50 1/2” 110/50 18VA 15 65 0-16 7400 98.05D289BW-24 1/2” 24DC 14W 15 65 0-6 7250 98.05D290DBW-230/50 3/4” 230/50 18VA 15 80 0-16 7700 143.20D290DBW-110/50 3/4” 110/50 18VA 15 80 0-16 7400 143.20D290DBW-24 3/4” 24DC 14W 15 80 0-6 7250 143.20D293DBY-230/50 1” 230/50 18VA 25 170 0-16 7700 161.10D293DBY-110/50 1” 110/50 18VA 25 170 0-16 7400 161.10D293DBY-24 1” 24DC 14W 25 170 0-6 7250 161.10


Tech Sheet 10251

Tech Sheet 10380

Tech Sheet 10379

Tech Sheet 10378

07 Valves-4.indd 753 16/02/2015 09:20

754


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Sec

tio

n 7

– Va

lves

Solenoid Valves

Steam 2/2 Way N/C Steam Pilot Operated Solenoid Valves

Ambient Temperature:-10°C to +70°CMedia Temperature:-10°C to +180°C

Page Tech Sheet 974

2/2 Way N/C, BSPP

0030

D634DTT24VAC 1/4” 21 0.3 10 118.35D634DTT110VAC 1/4” 21 0.3 10 118.35D634DTT240VAC 1/4” 21 0.3 10 118.35D635DTT24VAC 3/8” 24 0.3 10 118.35D635DTT110VAC 3/8” 24 0.3 10 118.35D635DTT240VAC 3/8” 24 0.3 10 118.35D636DTT24VAC 1/2” 25 0.3 10 118.35D636DTT110VAC 1/2” 25 0.3 10 118.35

DIN Connectors

Plug to Suit F133/F180/F280 (1/8”-1”)

0030

2021-7303 2.70

Plug to Suit FSS/F153/F180/F280/F333 (1/8”-2”)

0030

2021-7329 2.70

DIN Connectors with RED indicating LED

LED Plug to Suit F133/F180/F280 (1/8”-1”)

0030

2027-5384 10V - 50V 9.702027-5392 70V - 250V 9.20

LED Plug to Suit FSS/F153/F180/ F280/F333 (1/8”-2”)

0030

2027-5400 10V - 50V 9.702027-5418 70V - 250V 9.70

Valve Coils

0030

2700 230/50 17.602400 110/50 17.602250 24DC 17.607700 230/50 24.157400 110/50 24.157250 24DC 24.157701 230/50 30.307401 110/50 30.307251 24DC 30.30

0030

D636DTT240VAC 1/2” 25 0.3 10 123.10D606DTY24VAC 3/4” 120 1 10 194.55D606DTY110VAC 3/4” 120 1 10 194.55D606DTY240VAC 3/4” 120 1 10 194.55D622DTY24VAC 1” 120 1 10 194.55D622DTY110VAC 1” 120 1 10 194.55D622DTY240VAC 1” 120 1 10 194.55

07 Valves-4.indd 754 16/02/2015 09:20

755

Sec

tio

n 7

– Va

lves


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Angle Seat Piston Valves

Stainless Steel Angle Seat Piston Valves

• 45mm actuator. • 45mm actuator.



Tech Sheet 968

Compact 45mm Actuator, 2 Way N/C, BSPP

0030

PG205CTW00 1/2” 98 16 176.45PG206CTX00 3/4” 164 16 230.70

• 63mm actuator. • 63mm actuator.

63mm Actuator, 2 Way N/C, BSPP

0030

PG205STW00 1/2” 98 20 241.15PG206STX00 3/4” 164 20 254.30PG207STY00 1” 260 20 282.85PG208STZ00 1.1/4” 410 16 342.00PG209STK00 1.1/2” 700 16 374.20PG210STJ00 2” 950 11 473.60

Tech Sheet 969

Compact 45mm Actuator, 2 Way N/O, BSPP

0030

RPG205CTW00 1/2” 98 16 203.85RPG206CTX00 3/4” 164 16 216.00

63mm Actuator, 2 Way N/O, BSPP

0030

RPG205STW00 1/2” 98 20 255.10RPG206STX00 3/4” 164 20 268.80RPG207STY00 1” 260 20 301.50RPG208STZ00 1.1/4” 410 16 365.75RPG209STK00 1.1/2” 700 16 417.45RPG210STJ00 2” 950 11 510.15



For Stainless Steel Fittings see pages 554-555

07 Valves-4.indd 755 16/02/2015 09:20

756


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Sec

tio

n 7

– Va

lves

Angle Seat Piston Valves

Bronze Angle Seat Piston Valves• 45mm actuator. • 45mm actuator.

• 45mm actuator.





Tech Sheet 970

Tech Sheet 970

Compact 45mm Actuator, 2 Way N/C, BSPP

0030

CG205CTW00 1/2” 98 16 163.75CG206CTX00 3/4” 164 16 152.70CG207CTY00 1” 260 16 227.30

• 63mm actuator.

63mm Actuator, 2 Way N/C, BSPP

0030

CG205STW00 1/2” 98 20 181.50CG206STX00 3/4” 164 20 199.00CG207STY00 1” 260 20 221.40CG208STZ00 1.1/4” 410 16 316.60CG209STK00 1.1/2” 700 16 359.80CG210STJ00 2” 950 11 370.70

Tech Sheet 971

Tech Sheet 971

Compact 45mm Actuator, 2 Way N/O, BSPP

0030

RCG205CTW00 1/2” 98 16 153.35RCG206CTX00 3/4” 164 16 169.40RCG207CTY00 1” 260 16 220.15

63mm Actuator, 2 Way N/O, BSPP

0030

RCG205STW00 1/2” 98 16 199.60RCG206STX00 3/4” 164 16 210.10RCG207STY00 1” 260 16 235.95RCG208STZ00 1.1/4” 410 16 286.00RCG209STK00 1.1/2” 700 16 327.10RCG210STJ00 2” 950 12 384.35

Pilot Operated Piston ValvesAmbient Temperature:-10°C to +80°CMedia Temperature:-10°C to +90°C

Tech Sheet 973

Compact 2/2 Way N/C, BSPP

0030

BLG204DBW00 3/8” 45 10 108.30BLG205DBW00 1/2” 55 10 108.30

Banjo Solenoid Valves• Suitable for use with M&M, CG,

PG & BLG piston valves.


Tech Sheet 972

Direct Mount

0030

B356CVCMK24VDC 45 24V DC 65.55B356CVCMK24VAC 45 24V AC 65.55B356CVCMK110VAC 45 110V AC 63.05B356CVCMK240VAC 45 240V AC 65.55B326CVCMK24VDC 63 24V DC 72.70B326CVCMK24VAC 63 24V AC 75.65B326CVCMK110VAC 63 110V AC 72.70B326CVCMK240VAC 63 240V AC 72.70

07 Valves-4.indd 756 16/02/2015 09:20

757

Sec

tio

n 7

– Va

lves


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Pressure Switches

Direct Mount Pressure Switches• Body: Brass• Diaphragm: Silicone Rubber• Damper Spring: Stainless Steel• Microswitch: 10amp

• Body: Brass• Diaphragm: Silicone Rubber• Damper Spring: Stainless Steel• Microswitch: 10amp

Tech Sheet 975

Brass, Suitable for Water, Steam & Aggressive Media, BSPT

0061

XP73AE61.000 1/8” 0.2-1.2 0.20±0.1 ±0.15 27.70XP73CE61.000 1/8” 1.0-2.5 0.20±0.1 ±0.2 27.70XP73DE61.000 1/8” 1.5-4.0 0.20±0.1 ±0.2 27.70XP73EE61.000 1/8” 2.0-6.0 0.30±0.1 ±0.2 27.70

Brass, Suitable for Pumped Water Systems, Air & Low Pressure Hydraulics, BSPT

0061

GP73ME31.000 1/8” 0.2-3.0 0.25±0.1 ±0.2 21.70GP73PE31.000 1/8” 1.0-5.0 0.25±0.1 ±0.2 25.30

• Ideal for hot water, steam & semi-aggressive media.


Tech Sheet 976

Stainless Steel, Suitable for Hot Water, Steam & Semi-agressive Media, BSPT

0030

XP83FE61000 1/8” 4.0-9.0 53.65XP83GE61000 1/8” 9.0-15.0 53.65

Suitable for Pneumatic and Hydraulic Media Applications. These Pressure Switches are fi tted with a high resistance NBR rubber diaphragm and are suitable for many applications, particularly for the control of pneumatic and hydraulic pressure. They are also suited to applications where a high number of repeatable operations is required.Wetted Parts:Body: Brass Diaphragm: NBR RubberDamper Spring: Stainless Steel Microswitch: 10 amp

Male Thread, BSPP

0030

2019-4254 1/8” 0.2-3.0 35.902019-4262 1/8” 1.0-5.0 42.302019-4270 1/8” 4.0-10.0 42.30

For other pressure ranges and variations in materials, please contact our technical sales.

Direct Mount Vacuum Switches

Tech Sheet 977

Suitable for Vacuum Systems, BSPT

0061

XV73VEN1.000 1/8” -1200 150±50 ±20 35.10XV73ZEN1.000 1/8” -1150 100±50 ±20 30.80

Strainer for Condensate Drain• Strainer consisting of a ball valve with fi lter to be used together with an

automatic drain valve. In order to clean & check the fi lter it is suffi cient to close the valve to isolate it & then unscrew the plug.


Tech Sheet 978

BSPP

0030

887057000 1/2” 1/2” 22.90887058000 3/8” 1/2” 21.35887059000 1/4” 1/2” 21.35

Pressure Switches

For Galvanised Fittings see pages 1060-1070

Tech Sheet 10440

07 Valves-4.indd 757 16/02/2015 09:20

758


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Sec

tio

n 7

– Va

lves

Process Valves

Electrically Actuated, 2 Way Brass Ball ValvesFull technical specifi cations available on request.• ISO 5211 Mounting PadNote:The valve is suitable for non-aggressive fl uids. i.e. oil, gas and light applications.• Actuator and valve packages are available with integral fail-safe battery systems.• IP67 Ingress Protection.• ATEX Certifi cation also available.24V AC & 12V AC/DC available on request.

Working Temperature:Actuator: -10°C to +55°CValve: -20°C to +150°C

Tech Sheet 850 & 851

Low Pressure, High Voltage, 100-230/50Hz, BSPP

0129

E100H003HV 3/8” 361.25E100H004HV 1/2” 362.10E100H005HV 3/4” 357.15E100H006HV 1” 366.25E100H007HV 1.1/4” 386.00E100H008HV 1.1/2” 425.55E100H009HV 2” 644.20

Low Pressure, Low Voltage, 24/50Hz - 24V DC, BSPP

0129

E100H003LV 3/8” 361.25E100H004LV 1/2” 362.10E100H005LV 3/4” 357.15E100H006LV 1” 366.25E100H007LV 1.1/4” 386.00E100H008LV 1.1/2” 425.55E100H009LV 2” 644.20

High Pressure, High Voltage, 100-230/50Hz, BSPP

0129

E101H003HV 3/8” 65 353.10E101H004HV 1/2” 65 353.85E101H005HV 3/4” 50 360.40E101H006HV 1” 50 422.95E101H007HV 1.1/4” 40 408.30E101H008HV 1.1/2” 40 597.15E101H009HV 2” 25 635.85E101H010HV 2.1/2” 25 1044.45E101H011HV 3” 25 1410.85

High Pressure, Low Voltage, 24/50Hz - 24V DC, BSPP

0129

E101H003LV 3/8” 65 353.10E101H004LV 1/2” 65 353.85E101H005LV 3/4” 50 360.40E101H006LV 1” 50 422.95E101H007LV 1.1/4” 40 408.30E101H008LV 1.1/2” 40 597.15E101H009LV 2” 25 631.50E101H010LV 2.1/2” 25 1044.45E101H011LV 3” 25 1288.45

Electrically Actuated, 3 Way L Ported Brass Ball ValvesFull technical specifi cations available on request.• ISO 5211 Mounting PadNote:The valve is suitable for non-aggressive fl uids. i.e. oil, gas and light applications.• Actuator and valve packages are available with integral fail-safe battery systems.• IP67 Ingress Protection.• ATEX Certifi cation also available.24V AC & 12V AC/DC available on request.

Working Temperature:Actuator: -10°C to +55°CValve: -20°C to +150°C

Tech Sheet 852

Low Pressure, High Voltage, 100-230/50Hz, BSPP

0129

E153H003HV 3/8” 367.05E153H004HV 1/2” 367.85E153H005HV 3/4” 378.55E153H006HV 1” 415.70E153H007HV 1.1/4” 470.95E153H008HV 1.1/2” 672.20E153H009HV 2” 761.80

Low Pressure, Low Voltage, 24/50Hz - 24V DC, BSPP

0129

E153H003LV 3/8” 367.05E153H004LV 1/2” 367.85E153H005LV 3/4” 378.55E153H006LV 1” 415.70E153H007LV 1.1/4” 470.95E153H008LV 1.1/2” 672.20E153H009LV 2” 761.80

07 Valves-4.indd 758 16/02/2015 09:20

759

Sec

tio

n 7

– Va

lves


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Page Tech Sheet 836

Pneumatic Actuated Valves

Pneumatic Actuated Brass Ball ValvesActuated ball valves suitable for use in Industrial, Pneumatic, Domestic and Hydraulic situations. Suitable media include Hot Water, Dry Steam, Gasoline, Unleaded Gasoline, Fuel, Gas-oil, Oils, Compressed Air. Not suitable for Methyl Alcohol and Saturated Steam.The actuator is attached securely to the ball valve, so as to provide trouble free operation.Please contact our Technical Department for larger sizes and plastic actuator options.Valve: 2 piece full bore ball valve, brass body and ballSeats: PTFEStem Seal: VitonThreads: BS21 Female/ Female


Working Pressure:See below

Double Acting Actuation, BSPP

0030

DA-1/4E 1/4” Either 40 203.50DA-3/8E 3/8” Either 40 203.50DA-1/2E 1/2” Either 40 201.85DA-3/4E 3/4” Either 40 209.60DA-1E 1” Either 40 222.20DA-11/4E 1.1/4” Either 40 249.60DA-11/2E 1.1/2” Either 40 318.70DA-2E 2” Either 40 365.90DA-21/2E 2.1/2” Either 25 637.40DA-3E 3” Either 16 821.90DA-4E 4” Either 16 1219.80

Single Action Actuation, Spring Return, BSPP

0030

SA-1/4E 1/4” Either 40 243.90SA-3/8E 3/8” Either 40 243.90SA-1/2E 1/2” Either 40 242.20SA-3/4E 3/4” Either 40 249.95SA-1E 1” Either 40 262.60SA-11/4E 1.1/4” Either 40 289.95SA-11/2E 1.1/2” Either 40 368.10SA-2E 2” Either 40 415.30SA-21/2E 2.1/2” Either 25 732.55SA-3E 3” Either 16 888.90SA-4E 4” Either 16 1255.05

Pneumatic Actuated Stainless Steel Ball ValvesActuated stainless steel ball valves suitable for use in Industrial, Pneumatic, Domestic and Hydraulic situations. 3 piece full bore stainless steel ball valve. The actuator is attached securely to the ball valve via an ISO mounting pad.Size and material options available on request.Please contact our Technical Department for larger sizes and stainless steel actuator options.Valve: 3 piece full bore Stainless Steel ball valveSeats: PTFEBody & Ball: ASTM A351-CF8MThreads: BS21 Female/ Female

Application: Wet or Dry Media

Working Pressure:1000 psi W.O.G.


0030

DA-1/4SS 1/4” Either 69 245.85DA-3/8SS 3/8” Either 69 245.85DA-1/2SS 1/2” Either 69 229.55DA-3/4SS 3/4” Either 69 249.50DA-1SS 1” Either 69 264.00DA-11/4SS 1.1/4” Either 69 300.30DA-11/2SS 1.1/2” Either 69 395.95DA-2SS 2” Either 69 511.00

Single Acting Actuation, Spring Return, BSPP

0030

SA-1/4SS 1/4” Either 69 286.20SA-3/8SS 3/8” Either 69 286.20SA-1/2SS 1/2” Either 69 267.65SA-3/4SS 3/4” Either 69 340.10SA-1SS 1” Either 69 354.60SA-11/4SS 1.1/4” Either 69 453.60SA-11/2SS 1.1/2” Either 69 548.10SA-2SS 2” Either 69 683.60

Actuator Switch BoxSafe area options are available, please contact our technical department.

Including Stainless Bracket

0030

SB-0001 DA-1/4E, DA-3/8E, DA-1/2E, DA-3/4E, DA-1E, DA-11/4E, SA-1/4E, SA-3/8E, SA-1/2E, SA-3/4E, SA-1E, SA-11/4E, DA-1/4SS, DA-3/8SS, DA-1/2SS, DA-3/4SS, SA-1/4SS, SA-3/4SS, SA-1/2SS 100.65SB-0002 All Others 100.65

07 Valves-4.indd 759 16/02/2015 09:20

760


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Sec

tio

n 7

– Va

lves


Pneumatic Actuated Brass 3 Way ValvesBall Seal: PTFEStem Seal: VitonThreads: BSPP


Working Pressure:1/4” to 3/4” PN30, 1” PN16,1.1/4” to 2” PN10

Double Acting, L Ported, BSPP

0030

DA-1/4L 1/4” 205.90DA-3/8L 3/8” 205.90DA-1/2L 1/2” 205.90DA-3/4L 3/4” 262.65DA-1L 1” 277.95DA-11/4L 1.1/4” 387.15DA-11/2L 1.1/2” 466.10DA-2L 2” 531.20

Double Acting, T Ported, BSPP

0030

DA-1/4T 1/4” 205.90DA-3/8T 3/8” 205.90DA-1/2T 1/2” 205.90DA-3/4T 3/4” 262.65DA-1T 1” 277.95DA-11/4T 1.1/4” 387.15DA-11/2T 1.1/2” 466.10DA-2T 2” 531.20

Single Acting, L Ported, BSPP

0030

SA-1/4L 1/4” 246.25SA-3/8L 3/8” 246.25SA-1/2L 1/2” 246.25SA-3/4L 3/4” 312.00SA-1L 1” 327.00SA-11/4L 1.1/4” 436.55SA-11/2L 1.1/2” 521.20SA-2L 2” 586.30

Single Acting, T Ported, BSPP

0030

SA-1/4T 1/4” 246.25SA-3/8T 3/8” 246.25SA-1/2T 1/2” 246.25SA-3/4T 3/4” 312.00SA-1T 1” 327.00SA-11/4T 1.1/4” 436.55SA-11/2T 1.1/2” 521.20SA-2T 2” 586.30

Pneumatic Actuated PVC 2 Way ValvesSeats: PTFESeals: Viton

Working Pressure:1/2” to 2” PN16, 2.1/2” to 4” PN10


0030

DA-1/2PVC 1/2” 271.00DA-3/4PVC 3/4” 278.60DA-1PVC 1” 292.25DA-11/4PVC 1.1/4” 300.20DA-11/2PVC 1.1/2” 413.80DA-2PVC 2” 436.70DA-21/2PVC 2.1/2” 688.95DA-3PVC 3” 773.00DA-4PVC 4” 1226.60


0030

SA-1/2PVC 1/2” 287.60SA-3/4PVC 3/4” 295.20SA-1PVC 1” 412.80SA-11/4PVC 1.1/4” 420.75SA-11/2PVC 1.1/2” 541.60SA-2PVC 2” 564.50SA-21/2PVC 2.1/2” 894.00SA-3PVC 3” 963.10SA-4PVC 4” 1477.95

Pneumatic Actuated Stainless Steel Sanitary 2 WayValve: 3 piece full bore ball valve, Stainless Steel body, Cavity fi lled PTFE seals, OD Butt Weld Ends.Actuator: Rilsan Coated Aluminium Body, 1/4” BSP Female Ports.Actuator assembly based on 6 bar Pilot Air.Stainless Steel Actuator.Other End Connections on Request: RJT, IDF, Clamp.

Double Acting Actuation

0030

DA-1/2SSOD 1/2” 293.05DA-3/4SSOD 3/4” 296.70DA-1SSOD 1” 333.00DA-11/2SSOD 1.1/2” 504.85DA-2SSOD 2” 674.40DA-3SSOD 3” 1369.60DA-4SSOD 4” 1932.20

Single Acting Actuation

0030

SA-1/2SSOD 1/2” 333.40SA-3/4SSOD 3/4” 387.25SA-1SSOD 1” 486.25SA-11/2SSOD 1.1/2” 616.95SA-2SSOD 2” 769.50SA-3SSOD 3” 1577.20SA-4SSOD 4” 2139.85

For Threaded PVC Elbowssee page 803

07 Valves-5.indd 760 10/02/2015 14:36

761

Sec

tio

n 7

– Va

lves


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics


Pneumatic Actuated Stainless Steel 3 Way ValvesSeats: PTFESeals: PTFEThreads: BSPP

Working Pressure:1000 psi W.O.G.

Double Acting, L Ported, BSPP

0030

DA-1/4LSS 1/4” 276.65DA-3/8LSS 3/8” 276.65DA-1/2LSS 1/2” 287.50DA-3/4LSS 3/4” 385.95DA-1LSS 1” 415.00DA-11/4LSS 1.1/4” 484.00DA-11/2LSS 1.1/2” 646.25DA-2LSS 2” 798.70

Double Acting, T Ported, BSPP

0030

DA-1/4TSS 1/4” 276.65DA-3/8TSS 3/8” 276.65DA-1/2TSS 1/2” 287.50DA-3/4TSS 3/4” 385.95DA-1TSS 1” 447.30DA-11/4TSS 1.1/4” 484.00DA-11/2TSS 1.1/2” 646.25DA-2TSS 2” 798.70

Single Acting, L Ported, BSPP

0030

SA-1/4LSS 1/4” 317.00SA-3/8LSS 3/8” 317.00SA-1/2LSS 1/2” 327.90SA-3/4LSS 3/4” 435.35SA-1LSS 1” 464.40SA-11/4LSS 1.1/4” 533.35SA-11/2LSS 1.1/2” 701.30SA-2LSS 2” 853.80

Single Acting, T Ported, BSPP

0030

SA-1/4TSS 1/4” 317.00SA-3/8TSS 3/8” 317.00SA-1/2TSS 1/2” 327.90SA-3/4TSS 3/4” 435.35SA-1TSS 1” 480.80SA-11/4TSS 1.1/4” 533.35SA-11/2TSS 1.1/2” 701.30SA-2TSS 2” 853.80

Pneumatic Actuated Stainless Steel 2 Piece, 2 Way Ball ValvesValve: 2 piece full bore ball valve, stainless steel body BSP female threads.Actuator: Rilsan coated aluminium body, 1/4” BSP female ports.Suitable Media: Hot Water, Gasoline, Unleaded Gasoline, Fuel, Gas-Oil, Oils, Compressed Air.Not suitable for methyl alcohol & saturated steam.Actuator assembly based on 6 bar pilot air.Other end connections on request: Socket Weld, Butt Weld, NPT.Stainless Actuator available on request.



0030

DA-1/4SS2 1/4” 242.25DA-3/8SS2 3/8” 242.25DA-1/2SS2 1/2” 224.10DA-3/4SS2 3/4” 231.35DA-1SS2 1” 253.10DA-11/4SS2 1.1/4” 282.15DA-11/2SS2 1.1/2” 377.80DA-2SS2 2” 482.00

Single Acting Actuation, BSPP

0030

SA-1/4SS2 1/4” 282.60SA-3/8SS2 3/8” 282.60SA-1/2SS2 1/2” 264.45SA-3/4SS2 3/4” 321.90SA-1SS2 1” 343.70SA-11/4SS2 1.1/4” 435.45SA-11/2SS2 1.1/2” 489.90SA-2SS2 2” 577.10

Pneumatic Actuated Stainless Steel High Pressure ValvesSeats: PTFE/PVDFSeals: RTFEThreads: BSPP (others available on request)

Working Pressure:6000 psi/408 bar


0030

DA-1/4SSHP 1/4” 460.60DA-3/8SSHP 3/8” 464.10DA-1/2SSHP 1/2” 468.70DA-3/4SSHP 3/4” 531.80DA-1SSHP 1” 667.75


0030

SA-1/4SSHP 1/4” 495.70SA-3/8SSHP 3/8” 499.20SA-1/2SSHP 1/2” 503.80SA-3/4SSHP 3/4” 610.55SA-1SSHP 1” 765.20

For ISO 5211 Ball Valve see page 687

07 Valves-5.indd 761 10/02/2015 14:36

762


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Sec

tio

n 7

– Va

lves

Butterfl y Wafer Pattern Valves

Cast Iron Body, Ductile Iron Disc, EPDM LinerSuitable for Flanges: BS10 Table E, PN10/16, ANSI150.

Suitable for Flanges: BS10 Table E, PN10/16, ANSI150.




Tech Sheet 14

Gear Operated

0030

GEAR/50DIEP 2” 112.65GEAR/65DIEP 2.1/2” 117.40GEAR/80DIEP 3” 125.35GEAR/100DIEP 4” 149.10GEAR/125DIEP 5” 172.90GEAR/150DIEP 6” 202.70GEAR/200DIEP 8” 298.25GEAR/250DIEP 10” 444.25GEAR/300DIEP 12” 625.10

Tech Sheet 15

Pneumatic Single Acting

0030

SA/50DIEP 2” 360.05SA/65DIEP 2.1/2” 409.50SA/80DIEP 3” 493.50SA/100DIEP 4” 588.70SA/125DIEP 5” 841.40SA/150DIEP 6” 1186.20SA/200DIEP 8” 2308.50SA/250DIEP 10” 2409.80SA/300DIEP 12” 4341.90

Actuator: Rilsan Coated Aluminium Body, 1/4” BSP Female Ports.Suitable for Flanges: BS10 Table E, PN10/16,

ANSI150.Actuator assembly based on 6 bar Pilot Air.

Tech Sheet 16

Pneumatic Double Acting

0030

DA/50DIEP 2” 247.95DA/65DIEP 2.1/2” 314.40DA/80DIEP 3” 320.90DA/100DIEP 4” 381.00DA/125DIEP 5” 479.10DA/150DIEP 6” 537.95DA/200DIEP 8” 779.20DA/250DIEP 10” 1109.90DA/300DIEP 12” 2278.60

Electric Actuator Safe Area 85 - 240V AC or DC single Phase (10” and 12” 230V AC Only).Suitable for Flanges: PN16 (ANSI150 on request).

Battery Backup Failsafe and Modulating (4-20mA or 0-10V) on request.ATEX Approved Actuator on request.

Tech Sheet 17

Electric Actuated, High Voltage

0030

E/50DIEP-HV 2” 494.35E/65DIEP-HV 2.1/2” 602.80E/80DIEP-HV 3” 774.30E/100DIEP-HV 4” 1021.65E/125DIEP-HV 5” 1456.90E/150DIEP-HV 6” 1466.70E/200DIEP-HV 8” 1696.60E/250DIEP-HV 10” 2895.95E/300DIEP-HV 12” 4425.75

Electric Actuated, Low Voltage

0030

E/50DIEP-LV 2” 494.35E/65DIEP-LV 2.1/2” 602.80E/80DIEP-LV 3” 774.30E/100DIEP-LV 4” 1021.65E/125DIEP-LV 5” 1456.90E/150DIEP-LV 6” 1466.70E/200DIEP-LV 8” 1696.60




Tech Sheet 14



Tech Sheet 17

For Stainless Steel Ball Valvessee page 703

Lever Operated

0030

LEVER/50DIEP 2” 58.70LEVER/65DIEP 2.1/2” 66.60LEVER/80DIEP 3” 74.60LEVER/100DIEP 4” 98.35LEVER/125DIEP 5” 122.20LEVER/150DIEP 6” 158.65LEVER/200DIEP 8” 218.95LEVER/250DIEP 10” 364.90

07 Valves-5.indd 762 10/02/2015 14:36

763

Sec

tio

n 7

– Va

lves


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics


Cast Iron Body, Stainless Steel Disc, EPDM LinerSuitable for Flanges: BS10 Table E, PN10/16, ANSI150.





Tech Sheet 14

Lever Operated

0030

LEVER/40SSEP 1.1/2” 63.70LEVER/50SSEP 2” 64.80LEVER/65SSEP 2.1/2” 67.10LEVER/80SSEP 3” 76.55LEVER/100SSEP 4” 102.35LEVER/125SSEP 5” 154.10LEVER/150SSEP 6” 184.70LEVER/200SSEP 8” 297.00LEVER/250SSEP 10” 497.15

Gear Operated

0030

GEAR/50SSEP 2” 127.10GEAR/65SSEP 2.1/2” 139.70GEAR/80SSEP 3” 148.30GEAR/100SSEP 4” 180.20GEAR/125SSEP 5” 223.30GEAR/150SSEP 6” 279.10GEAR/200SSEP 8” 467.25GEAR/250SSEP 10” 694.90GEAR/300SSEP 12” 987.00GEAR/350SSEP 14” 1303.50GEAR/400SSEP 16” 2326.50


0030

SA/50SSEP 2” 494.80SA/65SSEP 2.1/2” 550.10SA/80SSEP 3” 668.30SA/100SSEP 4” 761.90SA/125SSEP 5” 1089.40SA/150SSEP 6” 1556.35SA/200SSEP 8” 3084.55SA/250SSEP 10” 3210.00SA/300SSEP 12” 6001.25

Tech Sheet 16


0030

DA/50SSEP 2” 247.95DA/65SSEP 2.1/2” 314.40DA/80SSEP 3” 320.90DA/100SSEP 4” 381.00DA/125SSEP 5” 479.10DA/150SSEP 6” 537.95DA/200SSEP 8” 779.20DA/250SSEP 10” 1109.90DA/300SSEP 12” 2278.60



Tech Sheet 17


0030

E/50SSEP-HV 2” 494.35E/65SSEP-HV 2.1/2” 602.80E/80SSEP-HV 3” 774.30E/100SSEP-HV 4” 1021.65E/125SSEP-HV 5” 1456.90E/150SSEP-HV 6” 1466.70E/200SSEP-HV 8” 1696.60E/250SSEP-HV 10” 2895.95E/300SSEP-HV 12” 4425.75


0030

E/50SSEP-LV 2” 494.35E/65SSEP-LV 2.1/2” 602.80E/80SSEP-LV 3” 774.30E/100SSEP-LV 4” 1021.65E/125SSEP-LV 5” 1456.90E/150SSEP-LV 6” 1466.70E/200SSEP-LV 8” 1696.60







Tech Sheet 14

Tech Sheet 17

Tech Sheet 15

For Galvanised Tubingsee page 1071

07 Valves-5.indd 763 10/02/2015 14:36

764


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Sec

tio

n 7

– Va

lves


Cast Iron Body, Stainless Steel Disc, PTFE on EPDM LinerSuitable for Flanges: BS10 Table E, PN10/16, ANSI150.




Tech Sheet 14

Lever Operated

0030

LEVER/50SSPT 2” 80.95LEVER/65SSPT 2.1/2” 112.15LEVER/80SSPT 3” 121.45LEVER/100SSPT 4” 187.55LEVER/125SSPT 5” 275.00


Gear Operated

0030

GEAR/50SSPT 2” 125.50GEAR/65SSPT 2.1/2” 156.70GEAR/80SSPT 3” 166.00GEAR/100SSPT 4” 232.10GEAR/125SSPT 5” 319.55GEAR/150SSPT 6” 403.25GEAR/200SSPT 8” 544.50GEAR/250SSPT 10” 1232.00GEAR/300SSPT 12” 1712.15

Tech Sheet 15


0030

SA/50SSPT 2” 520.90SA/65SSPT 2.1/2” 614.40SA/80SSPT 3” 848.45SA/100SSPT 4” 1407.05SA/125SSPT 5” 2545.10SA/150SSPT 6” 2673.35SA/200SSPT 8” 4388.40SA/250SSPT 10” 7902.50SA/300SSPT 12” 11285.95

Actuator: Rilsan Coated Aluminium Body, 1/4” BSP Female Ports.Suitable for Flanges: BS10 Table E, PN10/16,

ANSI150.Actuator assembly based on 6 bar Pilot Air.

Tech Sheet 16


0030

DA/50SSPT 2” 348.30DA/65SSPT 2.1/2” 406.80DA/80SSPT 3” 479.40DA/100SSPT 4” 594.60DA/125SSPT 5” 865.10DA/150SSPT 6” 1222.70DA/200SSPT 8” 2167.60DA/250SSPT 10” 2855.05DA/300SSPT 12” 4803.10

Electric Actuator Safe Area 85 - 240V AC or DC single Phase (10” and 12” 230V AC Only).Suitable for Flanges: PN10/16, ANSI150 &

BS10 Table E.Battery Backup Failsafe and Modulating (4-20mA or 0-10V) on request.ATEX Approved Actuator on request.

Tech Sheet 17


0030

E/50SSPT-HV 2” 812.95E/65SSPT-HV 2.1/2” 1058.65E/80SSPT-HV 3” 1067.95E/100SSPT-HV 4” 1530.10E/125SSPT-HV 5” 1782.50E/150SSPT-HV 6” 2999.75E/200SSPT-HV 8” 3141.00E/250SSPT-HV 10” 5000.00


0030

E/50SSPT-LV 2” 907.10E/65SSPT-LV 2.1/2” 1163.25E/80SSPT-LV 3” 1186.60E/100SSPT-LV 4” 1645.70E/125SSPT-LV 5” 1906.10


Tech Sheet 14


Tech Sheet 17




For Carbon Steel Flangessee page 1079

07 Valves-5.indd 764 10/02/2015 14:36

765

Sec

tio

n 7

– Va

lves


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics


Cast Iron Body, Stainless Steel Disc, NBR LinerSuitable for Flanges: BS10 Table E, PN10/16, ANSI150.





Tech Sheet 14

Lever Operated

0030

LEVER/40SSNBR 1.1/2” 63.70LEVER/50SSNBR 2” 64.80LEVER/65SSNBR 2.1/2” 67.10LEVER/80SSNBR 3” 76.55LEVER/100SSNBR 4” 102.35LEVER/125SSNBR 5” 154.10LEVER/150SSNBR 6” 184.70LEVER/200SSNBR 8” 297.00LEVER/250SSNBR 10” 496.50

Gear Operated

0030

GEAR/50SSNBR 2” 127.10GEAR/65SSNBR 2.1/2” 139.70GEAR/80SSNBR 3” 148.30GEAR/100SSNBR 4” 180.20GEAR/125SSNBR 5” 223.30GEAR/150SSNBR 6” 279.10GEAR/200SSNBR 8” 467.25GEAR/250SSNBR 10” 694.90GEAR/300SSNBR 12” 987.00GEAR/350SSNBR 14” 1303.50GEAR/400SSNBR 16” 2326.50


0030

SA/50SSNBR 2” 494.80SA/65SSNBR 2.1/2” 550.10SA/80SSNBR 3” 668.30SA/100SSNBR 4” 761.90SA/125SSNBR 5” 1089.40SA/150SSNBR 6” 1556.35SA/200SSNBR 8” 3084.55SA/250SSNBR 10” 3210.00SA/300SSNBR 12” 6001.25

Tech Sheet 16



Tech Sheet 17


0030

E/50SSNBR-HV 2” 677.95E/65SSNBR-HV 2.1/2” 813.60E/80SSNBR-HV 3” 1051.25E/100SSNBR-HV 4” 1352.35E/125SSNBR-HV 5” 1928.70E/150SSNBR-HV 6” 1938.85E/200SSNBR-HV 8” 2252.65E/250SSNBR-HV 10” 3872.10E/300SSNBR-HV 12” 6114.75

Electric Actuator Safe Area 12-24V AC or DC single Phase (10” and 12” 24V AC/DC Only).Suitable for Flanges: PN16 (ANSI150 on request).

Battery Backup Failsafe and Modulating (4-20mA or 0-10V) on request. ATEX Approved Actuator on request.


0030

E/50SSNBR-LV 2” 490.05E/65SSNBR-LV 2.1/2” 654.30E/80SSNBR-LV 3” 857.30E/100SSNBR-LV 4” 1108.10E/125SSNBR-LV 5” 1605.35E/150SSNBR-LV 6” 1635.90E/200SSNBR-LV 8” 1928.25



Tech Sheet 14


Tech Sheet 17



For KELM™ Air Preparationsee pages 460-470


0030

DA/50SSNBR 2” 255.40DA/65SSNBR 2.1/2” 323.80DA/80SSNBR 3” 330.50DA/100SSNBR 4” 392.40DA/125SSNBR 5” 493.45DA/150SSNBR 6” 554.10DA/200SSNBR 8” 802.60DA/250SSNBR 10” 1143.20DA/300SSNBR 12” 2346.95

Tech Sheet 15

07 Valves-5.indd 765 10/02/2015 14:37

766


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Sec

tio

n 7

– Va

lves


Cast Iron Body, Stainless Steel Disc, Silicon LinerSuitable for Flanges: BS10 Table E, PN10/16, ANSI150.





Tech Sheet 14

Lever Operated

0030

LEVER/50SSSIL 2” 467.95LEVER/65SSSIL 2.1/2” 512.80LEVER/80SSSIL 3” 649.70LEVER/100SSSIL 4” 1067.40LEVER/125SSSIL 5” 1463.95LEVER/150SSSIL 6” 1564.05LEVER/200SSSIL 8” 1921.45LEVER/250SSSIL 10” 3463.25

Gear Operated

0030

GEAR/50SSSIL 2” 467.95GEAR/65SSSIL 2.1/2” 512.80GEAR/80SSSIL 3” 649.70GEAR/100SSSIL 4” 1067.40GEAR/125SSSIL 5” 1463.95GEAR/150SSSIL 6” 1564.05GEAR/200SSSIL 8” 1921.45GEAR/250SSSIL 10” 3463.25GEAR/300SSSIL 12” 4086.95

Tech Sheet 15


0030

SA/50SSSIL 2” 467.95SA/65SSSIL 2.1/2” 512.80SA/80SSSIL 3” 649.70SA/100SSSIL 4” 1067.40SA/125SSSIL 5” 1463.95SA/150SSSIL 6” 1564.05SA/200SSSIL 8” 1921.45SA/250SSSIL 10” 3463.25SA/300SSSIL 12” 4086.95

Actuator: Rilsan Coated Aluminium Body, 1/4” BSP Female Ports.

Suitable for Flanges:

BS10 Table E, PN10/16, ANSI150Actuator assembly based on 6 bar Pilot Air.

Tech Sheet 16


0030

DA/50SSSIL 2” 374.25DA/65SSSIL 2.1/2” 463.35DA/80SSSIL 3” 516.95DA/100SSSIL 4” 645.20DA/125SSSIL 5” 851.20DA/150SSSIL 6” 1008.15DA/200SSSIL 8” 1486.45DA/250SSSIL 10” 2199.00DA/300SSSIL 12” 3466.00

Electric Actuator Safe Area 85 - 240V AC or DC single Phase (10” and 12” 230V AC Only).Suitable for Flanges: PN10/16, ANSI150 & BS10 Table E.


Tech Sheet 17


0030

E/50SSSIL-HV 2” 620.65E/65SSSIL-HV 2.1/2” 751.75E/80SSSIL-HV 3” 970.40E/100SSSIL-HV 4” 1285.80E/125SSSIL-HV 5” 1829.05E/150SSSIL-HV 6” 1936.90E/200SSSIL-HV 8” 2403.85E/250SSSIL-HV 10” 3985.05


0030

E/50SSSIL-LV 2” 467.95E/65SSSIL-LV 2.1/2” 512.80E/80SSSIL-LV 3” 649.70E/100SSSIL-LV 4” 1067.40E/125SSSIL-LV 5” 1463.95E/150SSSIL-LV 6” 1564.05E/200SSSIL-LV 8” 1921.45



Tech Sheet 14



Tech Sheet 17


For Plastic Hose Reels see page 1193

07 Valves-5.indd 766 10/02/2015 14:37

767

Sec

tio

n 7

– Va

lves


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics


Cast Iron Body Stainless Steel Disc, EPDM LinerSuitable for Flanges: PN16 (ANSI150 on request).• Gear box on request.


Tech Sheet 14

Lever Operated

0030

L/LEVER/40SSEP 1.1/2” 77.65L/LEVER/50SSEP 2” 78.30L/LEVER/65SSEP 2.1/2” 92.40L/LEVER/80SSEP 3” 104.85L/LEVER/100SSEP 4” 145.20L/LEVER/125SSEP 5” 193.15L/LEVER/150SSEP 6” 224.40L/LEVER/200SSEP 8” 402.25L/LEVER/250SSEP 10” 662.45

Actuator: Rilsan Coated Aluminium Body, 1/4” BSP Female Ports.Suitable for Flanges: PN16 (ANSI150 on request).

Actuator assembly based on 6 bar Pilot Air.

Tech Sheet 15


0030

L/SA/50SSEP 2” 395.80L/SA/65SSEP 2.1/2” 449.95L/SA/80SSEP 3” 539.85L/SA/100SSEP 4” 642.50L/SA/125SSEP 5” 908.10L/SA/150SSEP 6” 1274.40L/SA/200SSEP 8” 2509.15L/SA/250SSEP 10” 2769.35L/SA/300SSEP 12” 4940.50

Tech Sheet 16


0030

L/DA/50SSEP 2” 283.70L/DA/65SSEP 2.1/2” 354.80L/DA/80SSEP 3” 367.25L/DA/100SSEP 4” 434.85L/DA/125SSEP 5” 546.10L/DA/150SSEP 6” 626.45L/DA/200SSEP 8” 980.30L/DA/250SSEP 10” 1469.90L/DA/300SSEP 12” 2877.20

Electric Actuator Safe Area 85 - 240V AC or DC single Phase (10” and 12” 230V AC Only).Suitable for Flanges: PN16 (ANSI150 on

request).Battery Backup Failsafe and Modulating (4-20mA or 0-10V) on request. ATEX Approved Actuator on request.

Tech Sheet 17


0030

L/E/50SSEP-HV 2” 530.10L/E/65SSEP-HV 2.1/2” 643.20L/E/80SSEP-HV 3” 820.65L/E/100SSEP-HV 4” 1075.50L/E/125SSEP-HV 5” 1523.65L/E/150SSEP-HV 6” 1554.90L/E/200SSEP-HV 8” 1897.75L/E/250SSEP-HV 10” 3255.35L/E/300SSEP-HV 12” 5024.20


Actuator assembly based on 6 bar Pilot Air.Battery Backup Failsafe and Modulating (4-20mA or 0-10V) on request. ATEX Approved Actuator on request.


0030

L/E/50SSEP-LV 2” 530.10L/E/65SSEP-LV 2.1/2” 643.20L/E/80SSEP-LV 3” 820.65L/E/100SSEP-LV 4” 1075.50L/E/125SSEP-LV 5” 1523.65L/E/150SSEP-LV 6” 1554.90L/E/200SSEP-LV 8” 1897.75



Actuator: Rilsan Coated Aluminium Body, 1/4” BSP Female Ports.Suitable for Flanges: PN16 (ANSI150 on request).

Actuator assembly based on 6 bar Pilot Air.


Tech Sheet 17


For Layfl at Delivery Hose see page 1156

07 Valves-5.indd 767 10/02/2015 14:37

768


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Sec

tio

n 7

– Va

lves


Cast Iron Body Stainless Steel Disc, NBR LinerCast Iron Body, Stainless Steel Disc, NBR LinerSuitable for Flanges:

BS10 Table E, PN10/16, ANSI150.• Gear box on request.

Temperature Range:-12°C to +80°C Temperature Range:

-12°C to +80°CTemperature Range:-12°C to +80°C

Tech Sheet 14

Lever Operated

0030

L/LEVER/40SSNBR 1.1/2” 77.65L/LEVER/50SSNBR 2” 78.30L/LEVER/65SSNBR 2.1/2” 92.40L/LEVER/80SSNBR 3” 104.85L/LEVER/100SSNBR 4” 145.20L/LEVER/125SSNBR 5” 193.15L/LEVER/150SSNBR 6” 224.40L/LEVER/200SSNBR 8” 402.25L/LEVER/250SSNBR 10” 662.45

Actuator: Rilsan Coated Aluminium Body, 1/4” BSP Female Ports.Suitable for Flanges:

PN16 (ANSI150 on request).Actuator assembly based on 6 bar Pilot Air.

Tech Sheet 15


0030

L/SA/50SSNBR 2” 395.80L/SA/65SSNBR 2.1/2” 449.95L/SA/80SSNBR 3” 539.85L/SA/100SSNBR 4” 642.50L/SA/125SSNBR 5” 908.10L/SA/150SSNBR 6” 1274.40L/SA/200SSNBR 8” 2509.15L/SA/250SSNBR 10” 2769.35L/SA/300SSNBR 12” 4940.50

Tech Sheet 16


0030

L/DA/50SSNBR 2” 283.70L/DA/65SSNBR 2.1/2” 354.80L/DA/80SSNBR 3” 367.25L/DA/100SSNBR 4” 434.85L/DA/125SSNBR 5” 546.10L/DA/150SSNBR 6” 626.45L/DA/200SSNBR 8” 980.30L/DA/250SSNBR 10” 1469.90L/DA/300SSNBR 12” 2877.20



Tech Sheet 17


0030

L/E/50SSNBR-HV 2” 530.10L/E/65SSNBR-HV 2.1/2” 643.20L/E/80SSNBR-HV 3” 820.65L/E/100SSNBR-HV 4” 1075.50L/E/125SSNBR-HV 5” 1523.65L/E/150SSNBR-HV 6” 1554.90L/E/200SSNBR-HV 8” 1897.75L/E/250SSNBR-HV 10” 3255.35L/E/300SSNBR-HV 12” 5024.20




0030

L/E/50SSNBR-LV 2” 530.10L/E/65SSNBR-LV 2.1/2” 643.20L/E/80SSNBR-LV 3” 820.65L/E/100SSNBR-LV 4” 1075.50L/E/125SSNBR-LV 5” 1523.65L/E/150SSNBR-LV 6” 1554.90L/E/200SSNBR-LV 8” 1897.75


Tech Sheet 17


Actuator: Rilsan Coated Aluminium Body, 1/4” BSP Female Ports.Suitable for Flanges:

PN16 (ANSI150 on request).Actuator assembly based on 6 bar Pilot Air.

For 1620 Test Point Kits see page 155

07 Valves-5.indd 768 10/02/2015 14:37

769

Sec

tio

n 7

– Va

lves


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Unidirectional Knife Gate Valves

Manual Handwheel Knife Gate ValvesTechnical Data:Designed to handle water & abrasive slurries.Suitable for industries such as: Mining, power , chemical & waste water treatment plants.Connectons are PN10 fl anges.Please contact our technical department if you require other options.

Maximum Working Pressure:2” to 10” = 10 bar12” = 6 bar

Cast Iron Body

0030

KGVCIM50 50 328.65KGVCIM65 65 337.40KGVCIM80 80 371.20KGVCIM100 100 386.60KGVCIM125 125 459.70KGVCIM150 150 520.60KGVCIM200 200 772.55KGVCIM250 250 1040.15KGVCIM300 300 1349.00

Pneumatic Double Acting Knife Gate ValvesTechnical Data:Designed to handle water & abrasive slurries.Suitable for industries such as: Mining, power , chemical & waste water treatment plants.Connections are PN10 fl anges.Please contact our technical department if you require other options.

Cast Iron Body

0030

KGVCIP50 50 528.20KGVCIP65 65 575.90KGVCIP80 80 699.75KGVCIP100 100 704.75KGVCIP125 125 842.95KGVCIP150 150 1047.10KGVCIP200 200 1394.40KGVCIP250 250 1980.60KGVCIP300 300 2636.70

The Full PerformanceCompressed Air Pipe System

For AIRpipe Ringmain System see pages 772-783


Maximum Working Pressure:2” to 10” = 10 bar12” = 6 bar

07 Valves-5.indd 769 10/02/2015 14:37

Documents

Ball Valves - tidyco.co.uk Valves... · Ball Valves Degreased Ball Valves, Brass High quality 2 piece full bore ball valve with full thread, degreased for oxygen. Valves supplied