Battelle Ultrasonic Liquid Level Monitor. Process and Measurement Technology Battelle Ultrasonic Liquid Level Monitor Demonstration Battelle 2 This demonstration

Battelle

BattelleUltrasonic Liquid Level Monitor

2

Process and Measurement Technology

Battelle Ultrasonic Liquid Level Monitor Battelle Ultrasonic Liquid Level Monitor DemonstrationDemonstration

Battelle

• This demonstration illustrates the “Corner Reflection” approach to tank level measurement via ultrasound.

• The displays that follow contain plots derived from data collected while emptying a tank of water.

• Two ultrasound sensors were used to generate the liquid level data.

• Both sensors were mounted to the lower outside of the tank, one at a 60° angle from the horizontal, the other at a 45° angle.

3



Battelle

The upper section of each display portrays data from the 60° sensor

The lower section of each display portrays data from the 45° sensor

4



Battelle

The plots on the left-hand portion of each display portray the tank with:

• The fill level shaded in blue,

• The sound zone from the 60° sensor shaded in green, and

• The sound zone from the 45° sensor shaded in red.

5



Battelle

The plots in the upper right-hand portion of each display show signal data from the 60° sensor.

The plots in the lower right-hand portion of each display show signal data from the 45° sensor.

6



Battelle

Actual ultrasound signals with the intersections of the sound zones and the wall of the tank highlighted. These zones are where strong “corner shots” will occur.

7



Battelle

The correspondence between the colored shaded regions and the sections of the tank wall intersected by the sound zones.

8



Battelle

Enlarged views of signals as they pass through sound zones (highlighted) on tank wall.

9



Battelle

Note the strong “corner shot” signal that occurs when the fill level passes through the second sound zone along the tank wall.

10



Battelle

The enlarged views of the signal emphasize the dramatic pulse from the “corner shot”.

11



Battelle

Sequence of displaysas tank empties from 24” to 2.5”.

12



Battelle

13



Battelle

14



Battelle

15



Battelle

16



Battelle

17



Battelle

18



Battelle

19



Battelle

20



Battelle

21



Battelle

22



Battelle

23



Battelle

24



Battelle

25



Battelle

26



Battelle

27



Battelle

28



Battelle

29



Battelle

30



Battelle

31



Battelle

32



Battelle

33



Battelle

34



Battelle

35



Battelle

36



Battelle

37



Battelle

38



Battelle

39



Battelle

40



Battelle

41



Battelle

42



Battelle

43



Battelle

44



Battelle

45



Battelle

46



Battelle

47



Battelle

48



Battelle

49



Battelle

50



Battelle

51



Battelle

52



Battelle

53



Battelle

54



Battelle

55



Battelle

56



Battelle

Contact:

Walter C. Weimer, Manager


Battelle, Pacific Northwest Division

[email protected]

(509) 375-6922

Technical Contacts:

Richard Pappas [email protected]

(509) 375-4546

Scott Cooley [email protected]

(509) 375-3604

Don Daly [email protected]

(509) 375-4365

Documents

Battelle Ultrasonic Liquid Level Monitor. Process and Measurement Technology Battelle Ultrasonic Liquid Level Monitor Demonstration Battelle 2 This demonstration