Upload
teagan-moreman
View
242
Download
10
Tags:
Embed Size (px)
Citation preview
Binks Smart Pump
Smart Pump Product Line
Electric Smart Pump
• E2-20: 5 GPM (260 PSI)
• E2-30: 8 GPM (260 PSI)
• E4-60: 16 GPM (260 PSI)
• E4-90: 24 GPM (203 PSI)
Accessories:• Low Shear Smart BPR
¾” to 2” Connections
• Smart Card: Automatic controls for
“Smart Circ” operation
Smart Pump Product Line
• Fluid Sections
• CV Drive Section
• 40:1 Gearbox
• 1.5 HP AC Motor
Description E2-20: 5 GPMDescription E2-20: 5 GPM
CV Cam
Cam Follower
Swivel Joint Tension Springs
Slide Rails
Description E2-20: 5 GPMDescription E2-20: 5 GPM
• AC Motor drives gear box and CV Cam.• Motor is controlled by inverter with either manual or PLC instruction.
• The motor frequency is directly proportional to the Fluid Output!
Motor Speed (HZ)
Pump CPMFluid Flow
(GPM)
20 9.8 1.23
25 12.25 1.53
30 14.7 1.84
35 17.25 2.16
40 19.8 2.48
45 22.25 2.79
50 24.7 3.09
55 27.1 3.39
60 29.5 3.69
65 31.85 3.99
70 34.2 4.28
75 36.6 4.58
80 39 4.88
Description E2-20: 5 GPMDescription E2-20: 5 GPM
Main Pump Assembly
Description E2-30: 8 GPM
Main Components
• 2 HP Motor & Gearbox
• Main Cam Shaft and Bearings
• 2 Cylinders 4 Ball Check
• Carriage and Cam Follower
• Carriage Support Shaft and Linear Ball Bearing Bushes
Description E2-30: 8 GPM
• 2 HP motor reduced through 56:1 gearbox.
• Single “constant velocity” cam & carriage assembly ensures no “hard” connections.
• (2) horizontally opposed fluid sections provide 8 GPM fluid output.
E2-30 Fluid Section
• Quick disconnect fluid section.
• Internal piston/fluid seal.
• Low pressure bellows seal.
• “Run to Failure” back up seal.
Main Components
• 5 HP Motor & Gearbox
• Main Cam Shaft and Bearings
• 4 Cylinders 8 Ball Check
• Carriage and Cam Follower
• Carriage Support Shaft and Linear Ball Bearing Bushes
Main Pump Assembly
Description E4-60 & E4-9016 & 24 GPM
Description E4-60 & E4-9016 & 24 GPM
Cam area drives (4) horizontal fluid pistons therefore providing a (4) cylinder true positive displacement operating pump.
Description E4-60: 15 GPMDescription E4-60: 15 GPM
View showing Min Max Cylinder position
Quick Disconnect Fluid Section
QD Sanitary Clamp piston
shaft connection
“Module” Designed Fluid Section
Complete fluid section can be removed by disconnecting (4) sanitary clamps and removal of (8) bolts!
Bolted connections
Bellows: “Run to Failure”
Use of secondary chevron style seal behind bellows provides a back up seal and allows for visual indication of bellows failure.
• Material flow path
• Secondary Seal (vertical piston pump style seal)
• Bellows location
Provides visual indication of bellows failure and allows operator time to repair before affecting production.
E4-60 Energy Consumption
E2-30 Energy Consumption
Binks Smart Pumps
ITW Ransburg – BinksITW Group – Finishing Division
320 Phillips Ave
Toledo OH 453612