Embed Size (px)
Citation preview
Bio Data of Dr. Pradeep Kumar Mahanta, Professor, Mechanical Engineering Department, Jorhat Engineering College, Jorhat
1. NAME : DR. Pradeep Kumar Mahanta
2. FATHER’S NAME : Late Maheswar Mahanta
3. DATE OF BIRTH : 1st April 1960 4. ADDRESS
a) Permanent : 2 FA, Probodh Mansion, Jorpukhuri, Uzanbazar, Guwahati-781001
b) Residential : Flat No. 5E, Naina Apartment, Dohabora Road,
Jorhat-785001 c) Office & Mailing : Professor Mechanical Engineering Department Jorhat Engineering College Garmur, Jorhat, Assam – 785 007 India d) Phone Number : 9435041405 (M), 8638276641 (M)
e) Email :[email protected], [email protected]
5. PRESENT POSITION HELD : Professor Mechanical Engineering Department Jorhat Engineering College Garmur, Jorhat, Assam – 785 007
India
6. AREAS OF INTEREST : Mechanical System Design, Energy
7. COURSES TAUGHT:
UG Level PG Level 1. Fluid Machinery 1. Flexible Manufacturing
Systems 2. Advances Solid Mechanics
2. Engineering Mechanics 3. Machine Design 4. Mechanics of Materials 5. CAD/CAM
8. EDUCATIONAL PROFILE:
Examination Institution/Board/
University
Year % of Marks Division/ Class
HSLC
Examination
Cotton Collegiate
H.S.School Board of
Secondary
Education, Assam
1976 69 1st Division
Pre-
University
Examination
Cotton College
1978 77 1st Division
B. Sc. Engg
(Hons) (Mechanical
Engineering)
REC, Rourkela 1983 76.5 1st Class (Hons.)
M. E. (Mechanical
Engineering)
Indian Institute of
Science, Bangalore
1989 CGPA : 8.00 1st Class
PhD Sambalpur
University
2002 Title of Thesis: Investigation into Contact
& Bending Stress Characteristics under
Dynamic Loading in Spur Gear Teeth
9. SHORT TERM COURSES ATTENDED:
Name of the Course/
Summer School
Place Duration Sponsoring
Agency
Engineering Noise and
Vibration Control
IISc Bangalore 13-24 July, 2009,2 Weeks Science &
Engineering
Research
Council, DST,
New Delhi
Nanotechnology:
Opportunity &
Challenges
NITTTR, Chandigarh 4-8 May, 2009, 1 Week Applied
Science Dept.,
NITTTR,
Chandigarh
Environmental
Management & ISO
14000
NITTR Guwahati 21-25 Nov, 2005,1 Week
NITTTR
Energy Conservation
Practises
IIT Guwahati 12-17 July, 2004,1 Week Dept of
Mechanical
Engg under
QIP
Industrial Design IIT Guwahati 6-10 Sept, 2004, 1 week IIT
Guwahati
Finite Element Analysis
& Identification in Rotor
Bearing Systems
IIT Guwahati
29-11-2004 to 11-12-2004, 2
Weeks
Dept of
Mechanical
Engg under
QIP
Recent Trends in
Industrial Tribology and
Maintenance
NIT Rourkela 29/11/2010 to 03/12/2010,
1 week
AICTE-ISTE
Short term
Training
Program
Induction Program NITTTR Kolkata (at JEC, Jorhat)
07/05/2018 to 17/05/2018
2 weeks TEQIP III
Induction Program on OBE
IIT Chennai 9/07/2018 to 13/07/2018, 1
week TEQIP III
10. RESEARCH PAPERS PUBLICATION DETAILS IN CONFERENCES/
JOURNALS
1. Mahanta, P K and Nayak, L, ‘Prediction of Contact Pressure Distribution in Involute
Spur Gears in Contact’, 43rd
Congress of Indian Society of Theoretical and Applied
Mechanics, Coimbatore, Dec 1998.
2. Mahanta, P K and Nayak, L, ‘Non-Hertzian Approach to Predict Pressure Distribution
in Gear Tooth Contact Problem’, Journal of Scientific & Industrial Research, Vol. 59,
May 2000, pp. 400-406.
3. Mahanta, P K and Kavi, N, ‘Determination of Deflection of Spur Gear Tooth by
Finite Element Method’, Journal of Institution of Engineers (India), Mechanical
Engineering Division, Vol. 81, Oct 2000, pp. 105-107.
4. P K Mahanta and N Kavi, ‘A Finite Element Approach for Assessment of Bending
Stresses Induced in involute Spur Gears’, 45th Indian Society of Theoretical and
Applied Mechanics, Sivakashi, Dec 2000.
5. P K Mahanta, V K Roy and S K Acharya, ‘Wear Characteristics of Aluminum Fly-ash
Composite’, 41st Annual Technical Session, Jan 2000, Orissa State Centre, Institution
of Engineers (India), awarded Institution prize.
6. S K Acharya and P K Mahanta ‘Friction and Wear Behaviour of Aluminum Fly-ash
Composites’, 16th International Conference on Solid Waste Technology &
Management, Dec 2000, Philadelphia, USA.
7. P K Mahanta, ‘Bio Gasification: Application to North Eastern States of India’,
Proceedings of short term training on Renewable Energy Applications in North
Eastern Region, Oct 21-26, 2002
8. Dr. S. K. Acharya, P. K. Mahanta, P. K Pattanaik, ‘Wear behaviour of Aluminium
flyash composite’, Journal of Institution of Engineers (India), Metallurgical and
Materials Engineering Division, Vol. 83, Oct 2002, pp 50-53.
11. IMPORTANT CONTRIBUTIONS TO THE UNIVERSITY/ COLLEGE/
DEPARTMENT LEVELS APART FROM TEACHING
1. Conducting 5th
sem BE (comp) Examination
2. Organizing one day talk on Rural Development under TEQIP III on 6June 2018
3. Appointed as a member of steering committee for CEE, 2018
4. Attended 2nd
BOS meeting of 1st and 2
nd semester under graduate engineering course
of ASTU
5. Act as external examiner of Master Degree Project at M. E. Dept., Assam Engineering
College, Guwahati on 21st July 2018
6. Selected as a member of Board of Studies for Mechanical Engineering under ASTU.
