• Blast Hole Drill Rig Hydraulics MINING , Pall, Ultipleat are trademarks of Pall Corporation. Filtration. Separation. Solution is a service mark of Pall Corporation. ® indicates a trademark registered in the USA. © 2007, Pall Corporation. Atlas Copco is a registered trademark of Atlas Copco AB. All rights reserved. Noria is a trademark of Noria Corporation. Ref #: IMABATLASDRILLRIG_1EN • Drill Rig Contact us at www.pall.com/mining A large Indonesian copper mine was having numerous problems with premature wear and failure of many hydraulic components on their Blast Hole Drill Rigs. The problems were causing unacceptable levels of downtime, costs and lost production. An investigation by Pall under their Total Fluid Management (TFM) contract with the mine found the oil contamination levels exceeded the mines standards for such systems. The cleanliness levels improved from ISO Code 18/17/14 to ISO Code 12/10/6 as reported by an independent laboratory. Cleanliness levels now exceed OEM and mine specifications Based on estimates of component service life extension due to improved oil cleanliness, provided by Noria, the improvement in cleanliness levels would translate to an estimated life extension factor of 5. The mine installed a Pall UP319++13ZB9 Ultipleat USRT filter housing complete with a UE319AZ13Z filter element and an RC861CZ091ZYM electrical indicator to provide the operator with remote indication of the filter element blockage. • Pall Ultipleat USRT UP319 Filter In cab filter element blockage display With the ever increasing impact of the global economy slowdown, open-cast mines are very focused in looking at ways to reduce maintenance and operational costs by increased reliability and availability of their heavy mobile equipment. Today's high pressure hydraulic systems on drill rigs demand far cleaner oil than ever before to guard against premature wear and failure. ®

Blast Hole Drill Rig Hydraulics - Industrial Manufacturing Hole Drill Rig Hydraulics MINING ... Drill Rig Contact us at ... many hydraulic components on their Blast Hole Drill

Download PDF Report

Upload
vanminh
View
252
Download
10

Embed Size (px)

Citation preview

•

Blast Hole Drill Rig Hydraulics

MINING

, Pall, Ultipleat are trademarks of Pall Corporation. Filtration. Separation. Solution is a service mark of Pall Corporation. ® indicates a trademark registered in the USA. © 2007, Pall Corporation.Atlas Copco is a registered trademark of Atlas Copco AB. All rights reserved.Noria is a trademark of Noria Corporation.

Ref #: IMABATLASDRILLRIG_1EN

•

Drill Rig

A large Indonesian copper mine was havingnumerous problems with premature wear and failure ofmany hydraulic components on their Blast Hole DrillRigs. The problems were causing unacceptable levelsof downtime, costs and lost production. An investigationby Pall under their Total Fluid Management (TFM) contract with the mine found the oil contamination levels exceeded the mines standards for such systems.

The cleanliness levels improved fromISO Code 18/17/14 to ISO Code 12/10/6 as reported by an independent laboratory.Cleanliness levels now exceed OEM and minespecificationsBased on estimates of component service lifeextension due to improved oil cleanliness, providedby Noria, the improvement in cleanliness levels wouldtranslate to an estimated life extension factor of 5.

The mine installed a Pall UP319++13ZB9 UltipleatUSRT filter housing complete with a UE319AZ13Zfilter element and an RC861CZ091ZYM electricalindicator to provide the operator with remote indicationof the filter element blockage.

•

Pall Ultipleat USRT UP319 Filter

In cab filter element blockage display

With the ever increasing impact of the globaleconomy slowdown, open-cast mines are veryfocused in looking at ways to reducemaintenance and operational costs by increasedreliability and availability of their heavy mobileequipment. Today's high pressure hydraulic systems on drill rigs demand far cleaner oil than ever before to guard against premature wearand failure.