Boson NetSim for CCNP 8.0

CCNP Network Simulator & Router Simulator

NetSim for CCNP 8.0 is designed to help you learn the Cisco IOS command structure, and it supports the technologies and skills required for the recently revised CCNP certification.

NetSim for CCNP also contains all of the NetSim for CCNA labs, which makes it the best value for individuals studying for the CCNA and CCNP certification exams.

NetSim for CCNP includes new labs for the ROUTE, SWITCH and TSHOOT technologies. In addition to new content, NetSim for CCNP 8.0 contains a new and improved interface that makes completing labs, compiling new labs and designing network topologies easier than ever before. The network topology, device consoles and lab instructions can share the screen in NetSim 8.0 with easy-to-use panes. NetSim 8.0 also supports multiple monitors.

Everything you need to create and compile new labs – from the NetMap topology designer, to the device configuration window, to the saving and merging of files – are all in one easily navigable window. Completing NetSim labs and creating your own labs have never been so easy.

Etherchannel Now Supported in NetSim for CCNP 8.0NetSim for CCNP now supports Etherchannel in four new SWITCH labs and two new TSHOOT labs.

EtherChannel provides fault-tolerant high-speed links between network devices where bottlenecks are likely to occur. For example, if a link in an EtherChannel fails, traffic is redirected from the failed link to the remaining links in the channel without intervention. Port-channels can be used to increase the bandwidth between network devices, and you can deploy it anywhere in the network.

Additional ResourcesNetSim 8.0 User Manual (PDF)How to compile a lab using NetSim 8.0 (PDF)

NetSim for CCNP 8.0 Enhancements

Vastly improved user interfaceExternal lab document viewer enables the use of multiple monitorsTelnet mode enables the user to open a separate Telnet session for each device in the simulated topologyNew labs supporting ROUTE, SWITCH and TSHOOT technologiesSupports EIGRP debuggingImproved EIGRP – less processor intensiveSupport for HSRP, MHSRP and VRRP

See a full list of supported technologies.

Boson NetSim for CCNP 8.0 Network Simulator Offers

Hands-on experience without the hardwareA Network Designer that supports 42 routers and 6 switchesUp to 200 devices per networkVirtual Packet Technology: software-created packets that are routed and switched through the simulated networkThe ability to populate the WAN slots with a broad range of Network ModulesA Telnet mode that allows you to configure devices in the simulated topology using the Windows Telnet programThe functionality of a full rack of equipment on your laptopAutomatic lab-grading capabilityThe ability to load and save your network configurationsThe ability to paste real router configurations into the devicesThe ability to configure your own ISDN and Frame Relay switch mappingsThe benefit of connecting your devices over simulated WANs without expensive ISP gearSupport for IPv6 addressing

NetSim for CCNP 8.0 Devices

42 Routers (Cisco devices)

6 Switches (Cisco devices)5 PCs: TFTP, Traffic generator, AAA Server, VPN Client, workstation48 total Cisco devices54 total devices

New CCNP Labs Include

Configuring Hot Standby Router ProtocolConfiguring Virtual Router Redundancy ProtocolConfiguring Multiple Hot Standby Router ProtocolTroubleshooting Hot Standby Router ProtocolConfiguring Hot Standby Router Protocol (HSRP)Configuring Virtual Router Redundancy Protocol (VRRP)Configuring Multiple Hot Standby Router Protocol (MHSRP)EtherChannel – PAgP and LACP3EtherChannel – Layer 2 and Layer 3

About This Network Simulator:Exam Numbers: 640-802, 640-816, 640-822, 642-813,642-832, 642-902Certifications: CCENT, CCNA, CCNP

NetSim 8.0 minimum requirements – NetSim requires one of the following Operating Systems: Windows 7, Windows Vista or Windows XP.

Minimum and Recommended Requirements: ***

Supported Operating Systems: Windows 7, Windows Vista, Windows XP

.NET Framework: Microsoft .NET Framework Version 3.5

Processor: 1-GHz Pentium processor or equivalent (Minimum); 3-GHz Pentium processor or equivalent (Recommended)

RAM: 512 MB (Minimum); 2 GB (Recommended)

Hard Disk: Up to 100 MB of available space

Display: 1024 x 768, 256 colors (Minimum); 1024 x 768 high color, 32-bit (Recommended)

Active Internet connection (Not Needed)

Don't update the software.

This is the latest release.

more info:- http://www.boson.com/network-simulator/ccnp-cisco-network-simulator

Update 2013/02/01 (version 8.6)

Link :- http://rapidshare.com/files/648680760/Netsim8.rar