Ø 550 mm
Designed by Cecilie Manz 2008
The Brancusi pendant meets a wide range of technical challenges in a pure, relaxed and roun-
ded form. The smooth curves of this lamp form harmonious and organic lines in the room,
and with a little imagination they are reminiscent of a water-polished stone. The Brancusi
pendant is in its element in rooms with a high ceiling, where its superior light easily illuminates
the entire room and its large surface complements the dimensions of the room. Brancusi is
designed to illuminate rooms with a high ceiling using a large, integrated aluminium reflector.
The lamp is available in two versions. The G12 socket and metal-halogen light source is
recommended for environments in which a high level of light and lower energy consumption
is needed. This pendant is named after the Romanian sculptor Constantin Brancusi.
Shade: White polycarbonate.
Reflector: Aluminium. Bottom plate: Plexiglass
Suspension: White pvc cable 3x0,75 mm2. Ballast: Yes, intergrated.
Canopy: White. Cable and wire length: 6 m.
Diffuser: Can be ordered separately.
IP20, , Class of insulation II.
Light Years PhotoFiler/2006.01a/EULumdat 1
Type No.: Pendel, IP20, kl. II, Vandal-kl. II
Test Report: 20080820.1
Date / name: 2008-08-20/LP/Imperial Lighting Lab.
File Name: DK 500 70W.ldt
Type: G12 70W HCI-T
Nominal Flux total: 6700 lm
Colour temp: 3000
Watt total: 70 W
Dimensions Luminous Physical
Length mm 350 550
Width (Circular=0) 0 0
Heigth C0° side 0 330
Heigth C90° end 0
Heigth C180° side 0
Heigth C270° end 0
Luminaire seen from above
Curve C-plane (C)
All the planes
Light Output Ratio
Product code EAN no. Surface Light source Max light source dimensions Total weight
G12 70W HCI-T
Max length: 170 mm 5,6 kg
Lightyears A/S · Balticagade 15 · DK-8000 Aarhus C · Tel. +45 8730 1240 · Fax +45 8730 1249 · www.lightyears.dk