Bucket Elevators & Conveyors - poskliznove-linky.eu .BuckeT eleVaTorS & conVeyorS. Hinged service

  • View
    215

  • Download
    0

Embed Size (px)

Text of Bucket Elevators & Conveyors - poskliznove-linky.eu .BuckeT eleVaTorS & conVeyorS. Hinged...

  • ToTal Value. ToTal SySTemS.ToTal Value. ToTal SySTemS.

    BuckeT eleVaTorS & conVeyorS

  • Hinged service doors located on both sides of the head section provide convenient access on 42 (1066.8mm) models and larger. Doors are weather tight and flush with the inside.

    Heavy-duty, double row, pillow block, roller bearings mounted externally. (Optional fully split bearing available)

    GSIs bucket elevators & conveyors are engineered to perform and built tough to provide years of reliable service. Whether your business is industrial or agricultural, whether your requirements are for receiving or unloading, pre-processing or post processing, count on GSI for your material handling needs.

    GSIs line of bucket elevators are highly corrosion resistant and made with either a galvanized finish or a powder coat finish for lasting durability and superior appearance.

    ElEvator hEaD fEaturES inCluDE...Twopiecehoodforinterioraccessibility.Fullradiuscontouredhoodtominimizewearandimprovematerialdischargeflow.Pressurereliefpanels(largeservicedoorsarelocatedonbothsidesofthehood-

    42 (1066 mm) models and larger.)Machined,UHMWshaftseals.Heavy-duty,crownedface,doublediscdrumpulleywithSOFR(staticconductive,

    oil resistant & fire retardant) lagging.Weathertightinternallipsealbetweenheadhousingandhoodtoeliminate

    moisture problems.Bearingplateswithverticaljackboltsforfinalinstallationalignment.Fullyadjustablethroatplate.Hingedpulleylaggingservicedoorsonbothsidesoftheheadhousing.

    SEE paGE 10-11 for SpECifiCationS

    BuckeT eleVaTor HeadS

    Thejibboomisavailable in 1/2 ton, 1 ton, and 2 ton models. It features a heavy-duty bolt on design, and is a cost effective solution for your maintenance needs.

    X-Series platforms are available for all single row bucket elevators. Theplatformhasincreasedareasurrounding the drive and motor for easy serviceability. Designed to meet OSHA specifications.

    Page 2

  • ThegSielectronicdistributoristhemostadvancedanduserfriendlydistributorcontroller on the market. With an industry leading touch screen display, moving spout locations is made easy. With a 6 color screen, one can visually determine thespoutpositionwithjustaglance.ThecontrollerispoweredbyaPlcwiththeabilitytoeasilycustomizetextandlockoutspecificspoutnumbers.Thesystem uses cutting edge electronic components and an efficient and compact drive configuration that assures high reliability in even the toughest conditions.

    When using the GSI electronic distributor controller, one can easily integrate the PLC control into a larger grain network. A user can control the desired spout position from another PLC while the GSI system is responsible for moving and reportingthespoutposition.Therearemultipleprotocoloptionsforintegratingan external controller, including Ethernet and serial.

    Thesefeaturesprovidetheenduserwithareliableandeasy-to-operateunitforany GSI brand distributor, new or existing.

    fEaturES:intuitivecontrolsandmenus.Multipleprotocolsavailable.industryleadingHMitouchscreencontrols.abilitytointerfacewithmainfarm/elevatornetwork.exceptionalgraphicswiththeabilitytocustomizetext.Weatherproofcontrols(neMa4rated).UlandUl-clistedforuseinUSandcanada.directdriveconfiguration.Hightorque,400:1reductionwithhp3-phasemotor.Rotarypositionsensorforaccuratepositioning.RetrofitstoanyexistinggSidistributor.

    diSTriBuTorSDiStributor fEaturES: 3/16and12gaugebodyparts.Outletsflanged. locatedunderthedistributoristhepositivelockingstainless

    steel index plate which offers protection from dust and harsh weather conditions.

    largethroatoninternalswingspout,bottomlinedwith1/4urethane for extended wear.

    Swingspoutturnsona11/2ballbearing,heavy-dutyshaftconnects to cable control.

    Boltedinternaldesign for easy

    replacement

    Brushequippedswing spout

    to reduce dust buildup

    Hot dippedgalvanized

    body

    Urethane lining for extended life

    Hinged door for convenient access

    Spring loaded latch mechanism

    Stainless steel precise locking index plate

    GSIs line of Distributors are galvanized for long life and minimum maintenance and come in many sizes and models from which to choose.

    SEE paGE 11 for SpECifiCationS Page 3

    elecTronic diSTriBuTorS

  • BooTS

    Optional gravity take-up available on36(914.4mm),42 (1066.8mm), & 48 (1219.2mm) elevators only

    Standard belt tension take-up assembly utilizescorrosionresistantacMe threaded rods.

    StanDarD buCkEtSBucketsareconstructedofadurable non-sparking polyethylene. Optional steel, nylon or urethane buckets are also available.

    An inspection window is located on both sides of the boot.

    Hinged access door on 42 (1066.8mm) & 48 (1219.2mm) only.

    GSi buCkEt ElEvator bootSOur elevator boots use a structural iron frame construction for solid support throughout the boot. All stiffeners and frames are powder coat finished before assembly for maximum corrosion resistance.

    boot SECtionS inCluDE...externallymountedpillowblockbearings.Belttensiontake-upscrewsutilizingcorrosionresistantacme

    threaded rod.Machined,fulllengthUHMWshaftsealattake-upplate

    bearing surface.Heavy-duty,crownfaced,doublediscdrumpulley.easyaccesscleanoutdoorsoneachend.Removablepanelatboottop,betweentrunks,canbe

    adapted to dust collection equipment.Standardbootconstructionofheavygaugesteelandbolted

    structural angle iron frame with vertical stiffeners.

    SEE paGE 10 for SpECifiCationS

    Page 4

  • Unique bolted tie angle design

    Powdercoated12gauge(2.65mm)steelconstructionand heavy-duty10gauge(3.41mm)steelwithcontinuousbuttweldseams to reduce corrosion from moisture and dust accumulation.

    Galvanized 14 gauge (1.9mm) steel bolted construction.Fixturewelded,structuralangleironflangesarecontinuously

    welded on the outside and stitch welded on the inside.Maintenancefriendly10(3048mm)inspectionsectionwith 9(2743.2mm)longopeningatbothfrontandback.Frontandbackpanelscanberemovedin3(914.4mm)increments.Theinspection door can be located in 6 different locations for ultimate flexibility.

    Uniqueboltedtieangledesignprovidesrigidity,squarenesstotrunking and is independent of flange bolts.

    durable,SOFR(staticconductive,oilresistant&fireretardant)rubber belting.

    othEr buCkEt ElEvator optionS:12gauge(2.65mm)trunkconstruction.10gauge(3.41mm)trunkconstructionon36(914.4mm)

    and larger models only.1/4(6.35mm)expandedmetalbackurethaneheadhousing

    and hood liners.Headserviceanddistributorserviceplatforms.ladderandsafetycagewithrestplatforms.Wingedselfcleaningbootpulley.Flaredboothopper.Standardboothopper.downlegbootinlethopper(fieldinstallationrequired).Urethanelinedheaddischargetransitions.guycablebrackets.Beltalignmentand

    speed monitors.Trunkingpressure

    relief vents.additional1/4(6.35mm)

    expanded metal back urethane head housing and hood liners.

    Boltonshovelpocket(field installed).

    gravitytake-ups with weight box available on 36(914.4mm)- 48 (1219.2mm) pulley models (weights not provided).

    SEE paGE 10 for SpECifiCationS

    Trunking

    Page 5

  • 12 (304.8mm), 14 (355.6mm),Tall en-maSSe conVeyorS & 20 (508mm)

    hEaD SECtionextendedmountflangebearingson12(304.8mm)and14(355.6mm)tallconveyors.

    External mount pillow block bearings on 20 (508mm) tall conveyors.Machined1/4(6.35mm)thickUHMWshaftseals.Flamecuthardenedsteelsprockets.SplithubsavailableMaintenancefriendly,boltedaccesstoallowremovaloftheshaft,sprocket,and

    bearings as an assembly.10gauge(3.41mm)housingon12(304.8mm)and14(355.6mm)conveyors, 7gauge(4.55mm)on20(508mm)conveyors.

    Head shafts are turned ground and polished.

    trouGh SECtion fEaturESDust and weather tight, heavy gauge, peaked covers on head, tail and intermediate trough.Abrasion resistant steel wear liners with recessed fasteners for removal or replacement.Boltedremovablebottomconstruction.Standard10gauge(3.41mm)intermediatetroughsides.Troughsectionsarefixtureassembledforaccuratealignmentandeaseofinstallation.Troughsectionsareflangedwithstructuralangletoproviderigidityandaccuratealignment.Standard roller chain engineered for each specific conveyor to maximize working load and expected life.UHMWflightspreventsteeltosteelcontact.UHMWreturnrollerswithshaftsboltedtotroughforeasymaintenanceandreplacementarestandard on12(304.8mm)to14(355.6mm)tallconveyors.

    Railreturnsarestandardonall20(508mm)tallconveyors.Railsarelinedwith1/4(6.35mm) abrasion resistant steel and tapered end to end to minimize flight wear and maximize cleaning.Railsoverlapatflangeconnectionsforsmoothoperation.

    SEE paGE 12-13 for SpECifiCationS

    tail SECtionextendedmountflangebearingson12(304.8)and14(355.6mm)tallconveyors.

    External mount pillow block bearings on 20 (508mm) tall conveyors.Heavy duty chain tension take-up system utilizing corrosion resistant acme

    threaded screws.Flamecuthardenedsteelsprockets.SplithubsavailableMaintenancefriendly,boltedaccesstoallowremovaloftheshaft,sprocket,and

    bearings as an assembly.10gauge(3.41mm)housingon12(304.8mm)and14(355.6mm)conveyors, 7gauge(4.55mm)on20(508mm)conveyors.

    Tailshaftsareturnedgroundandpolished.

    gSi12(304.8mm),14(355.6mm),and20(508mm)en-Masseconveyorsoffermanyfeaturestomaximizeperformanceandreduceoperationcosts.Forlargergraincapacityrequirements,gSioffersa26(660.4mm)and32(812.8mm)en-Masseconveyor.Theseconveyorsfeatureanextraheavy-dutyconstruction,easyaccesstoallvitalhardwareandapowdercoatedfinish for lasting durability. All of GSIs conveyors are highly corrosion resistant and come standard with a powder coat finish for lasting durability and superior appearance.

    en-Masseconveyorstandardfeaturesandoptions include...6 (152.4mm) pitch welded steel chain

    with v-cup flig