Cabled Flexible Linear

Clipping Simple

Europe

Hong Kong & Macau

Tel: +44 (0) 20 7620 1808

Tel : +852 2607 4268

[email protected]

[email protected]

www.optiled.comOPTILED

[email protected]

PVCTPU

24V DC

TPU cover provides protection

PVC body gives an extended life for the LED and prevent degradation

PC lens for enhanced optical performance

Braided wire heat sink makes connecting easy

Cut and Insert Mark

Structure

Cut, Clip, Press.

[email protected]

Incorporating advanced LEDs to emit up to 1000lm/m and up to 50,000 hours of high qualityperformance. (Best in class among same features)

Well designed for installations in harsh environments and underwater conditions.

Uses non-soldered connetions on an unbreakable flexible material to navigate corners easily.

No degradation or discolouration in direct sunlight enhances product durability.

Weatherproof

UV Resistant Seamless & continuouslength up to 20m

Fire Retardant

Increased longevity in coastal and marine environments.

Seamless & Continuous length up to 20m with accessories allows easy installation and maintains IP rating after cut & re-connection.

Fulfilled glow wire flammability and heat test at 650C for 30 sec, the contact point ignited becomes non-combustible within seconds providing an extra level of fire safety for environments of higher fire risks.

cabLED is tested with 200N / cm2 surface pressure test to guarantee product reliability.

Robust, Safe & Reliable

Plug & Play connection system Salt Water Resistant

Superior Brightnessand Quality

Significantly less energy consumtion than traditional light sources, generates up to 40% less heat than other LED Strips. No harmful ultra violet or infrared emission. RoHS-compliant and free of mercury and other toxic substances.

Energy-efficient and Eco-friendly

[email protected]

°,

UV/IR Protected, RoHS CompliantMaterialColour White

ApplicationIndoor (IP20)/ Outdoor (IP65)/ Outdoor (IP68)* *Available as special order only

Lightsource Other Details

CabLED 2000 4W

CabLED 2000

Specification

6W

CabLED 2000 8W

LED, Life Span 50,000 hours, CRI (Ra) 80, Beam Angle 120Dimmable via 1-10v and most TRIAC systems4W Per metre / 1W Per 1 segment =250mm167mA per metre / 42mA per 1 segment =250mmLED pitch 35.7mmFlame Retardant

2700K 370Im, 92Im/ W3000K 370Im, 92Im/ W4000K 400Im, 100Im/ W6500K 400Im, 100Im/ W

LED, Life Span 50,000 hours, CRI (Ra) 80, Beam Angle 120°,

°,

Dimmable via 1-10v and most TRIAC systems6W Per metre / 1.5W Per 1 segment =250mm 250mA per metre / 62mA per 1 segment =250mm


Input Voltage 24V DC Min. Bending Radius 60mmMax. Connection Length ‘ 20mMax.Loading Force 2kgWeight 60 g/mOperating Temperature -20°C ~ +50°CStorage Temperature -25°C ~ +60°C

Input Voltage 24V DC Min. Bending Radius 60mmMax. Connection Length ‘ 12mMax.Loading Force 2kgWeight 60 g/mLED pitch 35.7mm

Flame Retardant Operating Temperature -20°C ~ +50°CStorage Temperature -25°C ~ +60°C

CabLED 2000 4W CabLED 2000 6W CabLED 2000 8W

CabLED 2000Our most energy efficient product to date with up to 100lm/W performance. A tiny profile dimension of just 12mm X 3.4mm fits almost anywhere. Built from a super flexible polymer compound that makes installation even easier.IP20- IP65 options. The 4W option can run a 20 metre length from a single driver. No soldering on connections.

LED, Life Span 50,000 hours, CRI (Ra) 80, Beam Angle 120°,Dimmable via 1-10v and most TRIAC systems 8W per metre/ 1W per segment= 175mm330mA per metre/ 54mA per segment= 175mm


Input Voltage 24V DC Min. Bending Radius 60mm Max.Loading Force 2kgMax. Connection Length 10mWeight 75 g/mLED pitch 25mm

Flame Retardant Operating Temperature -20°C ~ +50°CStorage Temperature -25°C ~ +60°C

Warm White 4142273512Bright White 4142303512Natural White 4142403512Daylight 4142653512



3.4mm

12mm

[email protected]

Accessories- Connectors Accessories- Mountings

Flexible Coupler(4” / 6” / 12” / 24”)

4” 64014069056” 640140700512” 640140710524” 6401407205

6401406805

6401406505

6401407305 6200800603

6200800403

6401500105

6200800503

6401405405

6401403905

6401406705

Connects two CabLED strips with a 10cm / 4”, 15.2cm / 6”, 30.5cm / 12”, 61cm / 24” flexible cable.

PS-Link Connector

Used in all installations. Connects CabLED strip to power supply.

4 Way PS Splitter

Connects four CabLED strips to one power supply.

I-Connector

Connects two lengths of CabLED strips in a straight line. Use to extend a length of CabLED strip.

L-Connector

End Cap

Used in all instsallations. Protects end of CabLED strip that is not connectedto a connector.

1M Aluminium Extrusion (Single slot channel)

1M Plastic Flat Channeling

For single straight installation.To use with adjustable tile mounting.

Channel Bracket

1M Plastic DiffuserAdjustable Tilt Mounting

It installs easily with one screw and is barely visible after CabLED strip is snapped into place.

CabLED 2000

Used with Tilt Mounting and Flat Channeling for indoor applications only. Available in packs of 2.

For angle adjustments between 0-65 degrees. Must be used with 1M Plastic Flat Channeling. Two Adjustable Tilt Mounting units recommended per metre of product.

[email protected]

°,

UV/IR Protected, RoHS CompliantMaterialColour White

ApplicationIndoor (IP20)/ Outdoor (IP65)/ Outdoor (IP68)* *Available as special order only

Lightsource Other Details

CabLED 6000

Specification

LED, Life Span 50,000 hours, CRI (Ra) 80, Beam Angle 110Dimmable via 1-10v and most TRIAC systems9.6W Per metre / 0.28W Per 1 segment =30mm400mA per metre / 12mA per 1 segment =30mmLED pitch 30mmFlame Retardant


°, Input Voltage 24V DC Min. Bending Radius 100mmMax. Connection Length ‘ 10mMax.Loading Force 6kgWeight 100g/mOperating Temperature -20°C ~ +40°CStorage Temperature -25°C ~ +50°C

CabLED 6000Performance up to 1000lm per metre, perfect for high output requirements. IP20 - IP65 options. Can run up to 10 metres from a single driver. No soldering on connections and can be cut every 25mm for precision installation.


CabLED 6000

5.5mm

12mm

[email protected]

Accessories- Connectors

Flexible Coupler(4” / 6” / 12” / 24”)

4” 64014023056” 640140200512” 640140240524” 6401402505

6401406805

6401401905

6401401405

6401403905

6401401505

6401401605 6401401705

6401401805

Connects two CabLED strips with a 10cm / 4”, 15.2cm / 6”, 30.5cm / 12”, 61cm / 24” flexible cable.

PS-Link Connector

Used in all installations. Connects CabLED strip to power supply.

4 Way PS Splitter

Connects four CabLED strips to one power supply.

I-Connector

Connects two lengths of CabLED strips in a straight line. Use to extend a length of CabLED strip.

L-Connector

End Cap

Used in all instsallations. Protects end of CabLED strip that is not connectedto a connector.

CabLED 6000Accessories- Mountings

6200800603

6200800403

6401500105

6401500305

62008005036401500205

6200800303

6401405405

1M Aluminium Extrusion (Single slot channel)

1M Plastic Flat Channeling

For single straight installation.To use with adjustable tile mounting.

Channel Bracket

1M Plastic Diffuser

Adjustable Tilt Mounting

It installs easily with one screw and is barely visible after CabLED strip is snapped into place.

U-Connector

X-Connector

T-Connector

1M Angle Channeling

Edge BracketFor flush mount installations such as along a baseboard. Suitable for sue in high traffic areas.

Bridge Bracket

Holds CabLED strip securely in place using two screws.

For angle adjustments between 0-65 degrees. Must be used with 1M Plastic Flat Channeling. Two Adjustable Tilt Mounting units recommended per metre of product.

Used with Tilt Mounting and Flat Channeling for indoor applications only. Available in packs of 2.

[email protected]

DRIVER SPECIFICATION

Input Voltage

Rated Current

Rated Frequency

Input Voltage

Output Current

Total Power Output

Efficiency

Power Factor

Operating Temperature

IP Rating

Dimensions

CabLED LENGTH

6000

2000 4W

2000 6W

2000 8W

24V DC 18W 24V DC 30W 24V DC 60W 24V DC 100W

100-240V AC 100-240V AC 100-240V AC 100-240V AC

0.3A 0.3A 0.4A 0.6A

50/60 Hz 50/60 Hz 50/60 Hz 50/60 H

24V DC 24V DC 24V DC 24V DC

18W Max. 30W Max. 60W Max. 100W Max.

80% 80% 82% 82%

> 0.8 > 0.9 > 0.9 > 0.9

-20°C ~ +50°C -20°C ~ +50°C -20°C ~ +50°C -20°C ~ +50°C

IP67 IP67 IP67 IP67

120 L x 35 W x 28mm H 148 L x 46.5 W x 35mm H 185 L x 53 W x 40mm H 185 L x 53 W x 40mm H

0.75A Max. 1.25A Max. 25A Max. 4.16A Max.

≤ 1.6m ≤ 3m ≤ 6m ≤ 10m

≤ 4m ≤ 6m ≤ 14m ≤ 20m

≤ 2.5m ≤ 4m ≤ 9m ≤ 12m

≤ 2m ≤ 3m ≤ 7m ≤ 10m

Driver Options 2000/6000

Documents

Cabled Flexible Linear