Upload
magnus-nilsson
View
252
Download
1
Embed Size (px)
Citation preview
Hella Product Overview
Caravans and Motor Homes
Intensive SupportCustomized SolutionsInnovative TechnologiesOur Ideas,Your Success.
Ideas today forthe cars of tomorrow
2
Frontlighting
DynaView® Evo2 Page 11
Daytime running light Page 12 – 13
90 mm low beam headlights and spotlights Page 14 – 19
90 mm fog light and daytime running lights Page 20
50 mm headlights Page 21
Micro DE headlights Page 22
Indicator and position lights Page 23 – 26
Headlight cleaning systems Page 27
Rear lighting
Combination rearlights Page 29 – 39
Clearance lights Page 40 – 41
Safety stoplights Page 42 – 43
Reflectors Page 43 – 44
number plate lights Page 44 – 45
Side lighting
Side marker lights Page 47 – 48
Auxiliary indicators Page 49
Interior lighting
Ceiling lights Page 51 – 56
Orientation lights Page 57 – 59
Reading lights Page 60
Ambient lights Page 61
Accessories
Rear view camera system RVS-1 Page 63
Intelligent Battery Sensor Page 64 – 65
Switches, plugs, sockets Page 66 – 67
Battery chargers Page 66
Hazard warning lights Page 67
Hand lamps Page 67
Boxes of spare bulbs Page 67
3
Freedom without Hassle
Those who travel by caravan or motor home want to experience
independence and do their own thing.
Those who develop, design and produce these homes on
wheels have to set technological and design trends with every
new model series.
Those who have Hella on board as a partner have boundless
possibilities – as developers, manufacturers and users. Because
Hella means complete freedom – without any risky adventures.
Innovative . Modular concepts.
Technological leadership.
Hella has built up a leading global position through diligence,
creativity and precise quality. Over more than one hundred
years. Hella and modern caravanning – a permanently
successful relationship.
� More safety thanks to innovations in lighting technology e.g.
Xenon and LED.
� More effi ciency thanks to integrated electric and electronic
components.
� More equipment versions, more brand characteristics and
more trendsetting thanks to the exceptionally deep range of
products and modular systems.
� More safety in production and use thanks to Original
Equipment quality, synergies from our developments for the
international automotive industry and zero tolerance quality
management.
Local Hella support.
We don’t only see ourselves as a quality supplier, but also as a
development partner. If required, our developers and engineers
can work on the optimum solution for your application with your
0wn teams. This speeds up workfl ows and clears the way for
new standards. More technological freedom, more styling
freedom, more room for rationalisation: That is Hella.
Have a good trip to the future.
4
We are the 100% service provider for innovative individual customizing. And for 100 % reliability.
New dimensions in the lighting segment:
After decades of standard solutions, Hella continually broke new
ground – and became the Number 1 for customer-specifi c
solutions. The lead is growing. Because there are future-proof
solutions available that only Hella has to off er. We are able to
cover applications for all global brands thanks to work done in
our own lighting laboratory.
New dimensions in the fi eld of modular concepts:
Engineers, designers and controllers are equally delighted with
our modular system. It provides you with the whole spectrum of
design possibilities – from futuristic through dynamic, sporty,
business-like, elegant, classic to retro.
In our range, you will fi nd the solution no-one else can off er. At
Hella you can fall back on the entire spectrum of lighting
technology for headlights and other lights: halogen, Bi-
Halogen®, Xenon, Bi-Xenon®, LED, light guides, ellipsoid,
FreeForm FF. You tell us the installation opening and decide on
the design, we construct your module. In small series too, of
course.
New dimensions of modular speed:
We want to be faster than everyone else. An optimised Time-to-
Market process from the fi rst lines on a notebook through to
series delivery allows us to realise your individual design in no
time.
New dimensions in the fi eld of electrics and electronics:
Hella covers the whole range of possibilities. From technical
modern standard solutions to individual application
development. And we remain true to our motto “More safety and
more comfort” Hella off ers the combination of safety stoplight
and rear view camera in one solution, as well as applications for
closing and locking aids for storage compartment fl aps and
caravan doors. Also new: The switch generation with 6,000
lasering and illumination possibilities.
So take us with you on your journey to the future.
Because like you, we love real freedom.
5
1965 1973 1978 1986
Hella universal 2-chamber combination
rearlight series 1305 with lens reflectors
using bulb technology in the smallest
conceivable design.
Further development of the 3-chamber
combination rearlight series. The 1131
series is launched, in a very progressive
design for the time.
The Hella universal 3-chamber
combination rearlight series 1140 –
designed as a surface-mounted solution
for towed vehicles such as trailers –
becomes the lighting standard for
caravans.
The Hella universal 4-chamber
combination rearlight series 4460 as
surface-mounted solution with lens
pattern becomes established. The
design size increases in line with the
more stringent safety requirements for
more light output.
2002 2003 2004 2005
The Caraluna success story continues.
The first Hella-specific light with pattern-
free lens for caravans and motor homes
is launched - Caraluna II for horizontal
surface-mounting.
Customer-specific multi-function light
Fendt Caravan with chrome effect thanks
to the use of a transparent lens with
high-sheen vapour-plated reflectors.
The Caraluna II success story unfolds
further: The Caraluna II with chrome
effect, with transparent lens and high-
sheen vapour-plated reflectors is
launched on the market.
Modular light series Agroluna for
individual and combined lights with
pattern-free lenses and bulb-based
technology is launched. Customer-
specific multi-function light Bürstner
and Chateau.
Quick trip to the past
As early as in the 19th century, the fi rst “touring cars” appeared. The sometimes quite luxuriously equipped predecessors of the
modern caravan were invented in Britain. Initially they were horse-drawn, but shortly after the invention of the motor vehicle the fi rst
petrol-driven coaches were hitched to the travel cars. For more than one hundred years now, there has been a close relationship
between Hella and motor vehicles, including caravans and motor homes. Here is a quick look at our most recent past.
6
1989 1996 1998 2000
The Hella universal 3-chamber
combination rearlight series 6459 with
lens pattern finds its way into the
caravan industry. The light sweep allows
it to be flush-mounted near the outer
edges. This design effect gives a whole
new dimension to motor home and
caravan contours.
Birth of the first multi-function light for
the motor home and caravan branch. As
well as integrating all the light functions,
the triangular reflector required is also
integrated in horizontal installation
position. The Hella Caraluna I becomes a
sign of quality and brand recognition for
a whole branch.
The modular light series 122 mm for
individual and combined lights is
launched. The series undergoes
permanent further development in the
next few years through pattern-free lights
and LED lights.
The customer-specific multi-function light
with pattern-free lens adorns hobby
caravans.
2006 2008 2009 2010
Customer-specific developments for
hobby caravans and motor homes,
Hymer motor homes and Fendt caravans
and motor homes. Upgrade Caraluna
multi-function light series: Caraluna II
Plus with combined indicator/reverse
light.
Ongoing development of a success
story: The Caraluna family is extended by
the Caraluna Modular for vertical flush-
mounting. Pattern-free and coloured lens
with modular reflector inserts, which
allow a customised appearance,
realisation with bulb-based or LED
technology and horizontal flush-
mounting.
Upgrade round light 122 mm in LED and
extension of the Caraluna family:
Caraluna Vertical with chrome effect.
Hella matches the lighting technology
inside the light to the flowing body
design. A ring-shaped 3D body around
the edge which generates a “glowing
look” thanks to the use of forward-
looking LED technology takes over the
taillight function and gives the rear end of
the new Fendt Brilliant a unique and
unmistakable appearance.
7
Versatile technical possibilities through LEDs
Depending on product requirements or customer wishes, Hella uses LEDs in diff erent optical
lighting systems. Here are some examples of rear lights:
Direct light � Spot-like appearance
� No optical system necessary
� Max. distance between 2 LEDs =
15 mm
Fresnel systems � Suitable for all functions
� Homogeneous appearance
Refl ector with pattern/
lens without pattern
� Highly effi cient
� Brilliant-fi nish appearance
� Elongated appearance
� Homogeneous illumination
� Can be adapted to curved vehicle
contours
More design freedom through LEDs
The use of LEDs gives design engineers much greater freedom
in design. Ergonomic aspects can be implemented more easily.
8
LED indicators and the patented failure check
Legal requirement in all ECE states
In the case of vehicles approved for use on public roads, the
indicators must be monitored: the failure of an indicator must be
shown optically or acoustically in the vehicle. This applies in all
ECE states. This means possible indicator failure must be
monitored by the vehicle. Manufacturers use diff erent control
systems for this. The failure checks currently in use cannot
detect simple LED lights and indicate a fault. All Hella LED
indicators have integrated electronics for the failure check. The
indicators are self-monitoring. They generate an impulse that is
evaluated by the electronic ballast. This ballast simulates a 21 W
bulb, which makes operation with conventional fl asher units
possible.
As soon as one single LED fails, the light can be considered
faulty, the impulse is not generated. The ballast then switches
the bulb simulation off and the fl asher unit indicates a fault to the
vehicle driver.
Safe conversion to LED indicators is now possible using
patented Hella electronics.
Hella supplies electronic ballasts for all Hella LED indicators
which makes it possible to convert the indicator failure display
for various vehicles. This is necessary if the vehicle manufacturer
does not guarantee indicator bulb failure checking via the vehicle
electric system.
The method is patented by Hella. At the moment there are three
diff erent ballasts and several diff erent LED indicator types
available.
LED-light failure check and correct electrical connection
Operation of the LED light with AC voltage or synchronised
DC voltage is not permitted. The individual light functions
may only be operated with a vehicle fuse of max. 3 A.
On account of the low Watt power of LED lights, which
distinguishes them signifi cantly from fi lament bulb versions,
there can be problems with the bulb failure check during
operation on diff erent traction vehicles. As checking of the
indicators is required by law, we recommend operating the
light only in conjunction with the indicator control unit, Hella
part no. 5DS 009 552-... .
In addition, further lighting functions are detected by some
traction vehicles. This is a vehicle comfort function which is
not required by legislation and does not release drivers from
their obligation to see for themselves that the lighting
equipment is working. Here, too, faulty diagnosis can occur
on account of the low power levels involved (instrument
panel in the driver cab indicates light failure although the
function is working).
If faulty diagnoses such as the ones described above occur
during operation of your traction vehicle type, please contact
the vehicle manufacturer.
9
Frontlighting
DynaView® Evo2 Page 11
Daytime running light Page 12 – 13
90 mm low beam headlights and spotlights Page 14 – 19
90 mm fog light and daytime running lights Page 20
50 mm headlights Page 21
Micro DE headlights Page 22
Indicator and position lights Page 23 – 26
Headlight cleaning systems Page 27
10
DynaView® Evo2
A new lighting era
DynaView® Evo2 combines the safety functions cornering light
and fog light in compact round auxiliary lights which can be
installed on a large number of vehicles.
When the low beam is switched on, the right or left cornering
light is activated automatically and immediately when the
indicator is actuated or when the vehicle drives round a bend at
a speed of less than 40 km/h.
A yaw rate sensor measures the vehicle's angular acceleration
and triggers the turn-on signal when the car drives through a
curve. At the end of the curve, a dimmer softly fades the extra
light. If the reverse gear is engaged, both cornering lights are
switched on and ensure broad and bright illumination of the
areas along the left and right of the vehicle.
“The cornering light is
switched off during normal
driving situations on a straight
stretch of road”
“When turning a corner or
driving slowly through a curve
(at a speed less than 40
km/h), the cornering light is
turned on automatically.”
“When driving round a bend at
a speed of up to 40 km/h, the
respective headlight is
switched on automatically.”
“In foggy conditions, the
cornering light can be
switched on manually (both
sides) as a fog light.”
DynaView® Evo 2 inc. H7 bulb
with holding bracket, 12 V
Set inc. control electronics 1N0 009 295-801
individual left 1N0 009 295-011
individual right 1N0 009 295-021
Type approval 1951
Connector plug set
DynaView® Evo2
for 20 headlights 8JD 156 151-807
11
Fro
nt
lig
hti
ng
Daytime running light
LED daytime running light set, rectangular design
2 lights inc. harness, universal bracket,
3 high-performance LEDs per light, multi-voltage 9-33 V
12 V/max. 5.5 W, current consumption = 2.18 A
Set for surface-mounting 2PT 009 496-801
Individual light without bracket, DRL with PO
function
2PT 009 496-007
Type approval 2344
Advantages of daytime running light
Daytime running light provides a decisive safety advantage in
road traffi c and reduces the number of accidents which result in
serious injuries by 58%*.
For this reason, and long before the introduction of any legal
requirement, Hella has developed daytime running lights to
increase driving safety.
Daytime running lights provide more safety than low
beam.
The Hella daytime running lights generate a passively radiating
white signal light. Vehicles are seen more quickly and better by
other road users. Which means Hella makes the crucial
diff erence in increasing reaction time and creates a clear safety
lead.
* Study carried out by the SWOV-Institute for Road Safety Research on behalf of the EU.
Comparison of performance between low beam and daytime running light
Diesel-driven passenger carPetrol-driven passenger car
0.207
0.052
0.021
0.15
0.036
0.014
Saving and
4-times more light!90 %
Saving and
4-times more light!90 %
Low beam during the day
Daytime running light with bulbs
Daytime running light with LEDs
Source: BAST (Bundesanstalt für Straßenwesen - Federal Institute for Roadways)
12
Daytime running light
LED daytime running light set LEDayLine® with position light function
2 lights with five LED diodes per light and integrated relay for fully automatic
switch-on, inc. professional harness and attachment material, multi-voltage
9-32 V
12 V max. 5.5 W, current consumption = approx. 0.36 A
Set for surface-mounting 2PT 010 043-801
12 V, left 2PT 010 043-011
12 V, right 2PT 010 043-021
Type approval 2578
LED daytime running light LEDayFlex
Adaptation to the vehicle contour within the context of type-approved surface-
mounted systems, extremely flat module design height (Ø 30 mm, depth
22.3 mm), modern design combined with LED power, 30 x longer service life
than H7 bulbs, high-performance LEDs for best light output, lights up
automatically when ignition is switched on.
5 light modules daytime running light 2PT 010 458-801
5 light modules daytime running light/position light* 2PT 010 458-811
Type approval 5852
Vehicle-specific finisher, black
(only for daytime running light)
Suitable for Fiat Ducato, Citroen Jumper, Peugeot
Boxer. Inc. connection harness, installation material
and installation instructions.
2PT 010 043-811
LED daytime running lights set, round design
2 lights inc. harness, universal bracket,
3 high-performance LEDs per light, multi-voltage 9-33 V
12 V/max. 5.5 W, current consumption = 2.18 A
Set for surface-mounting 2PT 009 599-801
Individual light
without bracket, left 2PT 009 599-011
without bracket, right 2PT 009 599-021
without bracket, with PO function, left 2PT 009 599-031
without bracket, with PO function, right 2PT 009 599-041
Universal carrier frame 9AH 165 968-001
Type approval 2372
Find out more about further variants, legal requirements and fitting regulations at www.daytime-running-light.com or www.hella.com/lightshow.
* When LEDayFlex is used as a position light, the standard position light must be disabled in accordance with ECE-R 48.
13
Fro
nt
lig
hti
ng
Comparison between halogen and Xenon low beam
Product photo Description Light distribution
Ha
log
en
Classic
Halogen low beam
Page 18
Premium
Halogen and
Bi-Halogen®
Low beam
Page 16
Performance
Halogen low beam
Page 17
Xe
no
n
Classic
Xenon low beam
Page 18
Classic
Bi-Xenon® Low beam
Page 18
Premium
Bi-Xenon® Low beam
Page 16
14
Comparison between halogen and Xenon spotlight
Product photo Description Light distribution
Ha
log
en
Classic
Halogen spotlight
Page 18
Premium
Bi-Halogen® spotlight
Page 16
Performance
Halogen spotlight
Page 17
Xe
no
n
Classic
Xenon spotlight
Page 18
Classic
Bi-Xenon® spotlight
Page 18
Premium
Bi-Xenon® spotlight
Page 16
15
Fro
nt
lig
hti
ng
90 mm Premium
Bi-Xenon headlight
Low beam headlight and spotlight, 12 V
Xenon low beam headlight and spotlight in one lamp unit, Xenon low beam light
only permitted with headlight range adjustment and lens cleaning system.
Right-hand traffic, D2S, ECE
Right-hand traffic, D2S, ECE 1AL 009 997-001
Left-hand traffic, D2S, ECE 1LL 009 997-011
Right-hand traffic, D2S, SAE 1AL 009 997-021
Type approval 2484 and 2485
Bi-halogen headlight
Low beam headlight and spotlight, 12 V
Halogen low beam headlight and spotlight in one lamp unit.
Right-hand traffic, H7, ECE 1AL 009 998-001
Left-hand traffic, H7, ECE 1LL 009 998-011
Right-hand traffic, H9, SAE 1AL 009 998-021
Type approval 2484 and 2485
Halogen low beam headlight, 12 V
Metal reflectors with clear DE lens. Ideal in combination with the
matching spotlights and fog lights. Inc. light source.
Right-hand traffic, H7, ECE 1BL 009 999-001
Left-hand traffic, H7, ECE 1ML 009 999-011
Right-hand traffic, H7, SAE 1BL 009 999-021
Type approval 2486 and 2487
High-end illumination Low beam and high beam from a single headlight module, choice of Xenon or halogen technology. Pattern-free
glass cover lens. High-quality aluminium refl ector. With Xenon, waterproof ballast. Connection using 0.5 metre shielded supply cable
with detachable plug-type connection.
Would you like to combine modules of the Premium and Performance series
without having to commit yourself right at the start of the vehicle design
process?
Then use the tried-and-trusted Premium carrier frame structure as a basis.
This is compatible for the future, too.
Alongside the complete Premium range, the following modules of the
Performance series can also be used.
InformationModule attachment
90 mm spotlight with PO, 12 V bulb,
right-hand traffic
1KO 247 043-117
90 mm spotlight 12 V bulb,
right-hand traffic
1KO 247 043-127
90 mm low beam headlight with 12 V bulb,
right-hand traffic
1BL 247 042-117
Connector for H1 bulb low beam headlight 8JD 156 151-807
Connector PO for spotlight module 8JD 156 150-807
16
90 mm Performance
Optimised illumination. Modules in enhanced quality for use on long journeys.
With splashwater-proof plug-type connector.
Halogen low beam headlight, 12 V
Module headlight with aluminium reflector and clear DE lens behind pattern-free
glass cover lens
Right-hand traffic, H1 1BL 247 042-007*
1BL 247 042-001*
Left-hand traffic, H1 1BL 247 042-027*
1BL 247 042-021*
Type approval 2397
* Right-hand traffic variant can be switched from asymmetrical low beam
to symmetrical light.
Left-hand traffic variant can be switched from symmetrical to asymmetrical.
Halogen spotlight, 12 V
Module headlight with aluminium FF reflector and clear DE lens behind
pattern-free glass cover lens
with position light, H1 1K0 247 043-007
1K0 247 043-001
without position light 1K0 247 043-017
1K0 247 043-011
Type approval 2397
If you have been using Classic modules so far, you can easily upgrade these to
Performance modules.
The following Performance modules have the same module attachment as the
Classic modules and can thus be used for compatible and straightforward
replacement – without having to modify the existing Classic carrier frame
structure first.
InformationModule attachment
90 mm spotlight with PO, 12 V bulb,
right-hand traffic
1KO 247 043-157
90 mm spotlight 12 V bulb,
right-hand traffic
1KO 247 043-167
90 mm low beam headlight with 12 V bulb,
right-hand traffic
1BL 247 042-217
Connector for H1 bulb low beam headlight 8JD 156 151-807
Connector PO for spotlight module 8JD 156 150-807
17
Fro
nt
lig
hti
ng
90 mm Classic
Bi-Xenon headlight, 12 V
Low beam headlight and spotlight in one lamp unit
Module headlight with integrated ignition unit and pattern-free glass cover lens.
High-quality metal reflector. Waterproof Xenon electronic ballast. 1 metre
shielded supply cable with detachable plug-type connections.
Right-hand traffic 1AL 008 934-001*
Left-hand traffic 1LL 008 934-011*
SAE (USA) right-hand traffic 1AL 008 934-041
Type approval 1677
Accessories for Bi-Xenon
Plug for ballast 8JA 990 295-127
Plug for switching spotlight 8JD 162 211-801
* Right-hand traffic variant can be switched from asymmetrical low beam
to symmetrical light.
Left-hand traffic variant can be switched from symmetrical to asymmetrical.
Low beam headlight, 12 V
Module headlight with pattern-free glass cover lens,
magnesium reflectors and clear DE lens
Xenon low beam headlight
D2S 1BL 008 194-007
Left-hand traffic, D2S 1LL 008 194-037
D2S, USA version 1BL 008 194-047
Type approval 917
Halogen low beam headlight
H7, right-hand traffic 1BL 008 193-001
Left-hand traffic 1LL 008 193-117
H9, USA version 1BL 008 193-021
Type approval 917
Spotlight, 12 V
Module headlight with magnesium FF reflectors and pattern-free glass cover
lens
Xenon spotlight
with position light 1K0 008 192-007
without position light 1K0 008 192-017
Type approval 917
Halogen spotlight
with position light 1K0 008 191-001
without position light 1K0 008 191-017
with position light, USA version 1K0 008 191-131
without position light, USA version 1K0 008 191-051
Type approval 917
(H7)
143 (H9)
18
Actuator motors for Premium headlight range adjustment
for 12 V halogen headlights 6NM 007 282-221
for 12 V Xenon headlights 6NM 007 282-231
Classic connector plug set
H9 008 191-... and 008 193-..., for USA version
for 20 headlights 8JD 158 175-807
90 mm Accessories
Classic carrier frame
for low beam headlights
and spotlights
9AH 157 659-007
Rubber caps
for 90 mm halogen H7, Classic
Low beam headlight 008 193-..., non-ventilated
flat version for angled plugs 9GH 152 654-012
deep version for female connector housing 9GH 145 943-012
Rubber caps
for 90 mm halogen H7, Classic
Spotlight 008 191-... ventilated
flat version for angled plugs 9GH 152 654-007
deep version for female connector housing 9GH 145 943-001
Halogen H9:
Sealed through connector plug system, no cap required
Connector plug set
Performance and Classic spotlights with
position light
for position light, for
20 headlights
8JD 156 150-807
Connector plug set
Premium, Performance and Classic for Xenon
ballasts, halogen, bi-halogen and DynaView® Evo2
for 20 headlights 8JD 156 151-807
Premium carrier frame
coated black 9AH 169 580-011
Performance carrier frame
coated black 9AH 254 228-017
Actuator motors for Classic headlight range adjustment
for 12 V halogen headlights 6NM 007 282-227
for 12 V Xenon headlights 6NM 007 282-231
19
Fro
nt
lig
hti
ng
90 mm Fog and Daytime Running Light
Fog light 90 mm, 12 V
Minimum installation dimensions for a discreetly convincing lighting design.
Aluminium reflectors with clear lens. Ideal in combination with the matching
90 mm spotlights and low beam headlights.
Halogen fog light 1N0 008 582-007
Accessories: rubber cap
for fog lights 9GH 158 051-007
Type approval 1342
ECE R19 B series-02, B series-03
90 mm daytime running light
Module headlight with pattern-free glass cover lens, 12 V with P21W Longlife
bulb and Kartoval® LED
with daytime running light/position light 2BE 010 102-101
Type approval 2586
90 mm daytime running light
Module headlight with pattern-free glass cover lens, 12 V with H15,
55 W / 15 W bulb, with carrier frame
with daytime running light/spotlight 1F0 010 293-001
Type approval 2680
90 mm daytime running light
Module headlight with pattern-free glass cover lens, 12 V with H15,
55 W / 15 W bulb, with carrier frame
with daytime running light/fog light 1N0 010 294-001
Type approval 2681
20
50 mm Premium
Low beam headlight, 12 V
Installation frame for 3-point attachment, adjustable from the front and rear
Xenon
Right-hand traffic, D2S 1BL 009 071-047
Left-hand traffic, D2S 1ML 009 071-057
Halogen
Right-hand traffic, H7 1BL 009 071-007
Left-hand traffic, H7 1ML 009 071-017
Type approval 1903 and 1904
Spotlight, 12 V
3-point holder, adjustable using setting screw
Xenon
rear carrier frame is not included in the scope of
supply (see accessories), D2S
1F0 008 390-317
Type approval 1120
Halogen
H9 1KL 009 486-001
Type approval 2198
Fog light, 12 V
3-point holder, adjustable using setting screw, rear carrier frame is not included
in the scope of supply (see accessories)
H7 1NL 008 090-317
Type approval 877
Carrier frame (not for halogen spotlights)
a) without LWR holder 9AH 161 786-017
a) with LWR holder 9AH 161 784-017
Plastic cap
for fog lights 6NM 007 282-227
Rubber cap
a) for halogen low beam headlights 9GH 152 654-007
b) for fog lights 9GH 147 009-007
Actuator motors for headlight range adjustment
for 12 V halogen 6NM 007 282-221
for 12 V Xenon 6NM 007 282-231
Connector plug set
Rubber cap for 20 headlights 8JD 156 150-807
H9 plug for 20 headlights 8JD 158 175-807
Accessories for 50 mm headlight modules
a) b) a) b)
21
Fro
nt
lig
hti
ng
Micro DE headlights
Micro DE Premium Edition: fog light
Fog light set
with 12 V bulbs, with remote switching system and
aluminium design finisher
1NL 008 090-871
Individual fog light
with 12 V bulbs, aluminium design finisher 1NL 008 090-301
Type approval 877, ECE R19 B series 02
Micro DE Premium Edition: Xenon spotlight
Ref. 17.5, 12 V, black housing colour, inc. D2S Xenon bulb and
electronic ballast, aluminium design finisher
Set 1F0 008 390-821
Individual 1F0 008 390-301
Type approval 1120
DE Xenon
DE spotlight set, with black decorative rings, gas discharge lamps and 12 V
ballast
Spotlight set 1F0 008 390-801
Type approval 1120
Micro DE
Fog light set
with black decorative ring 1NL 008 090-821
with universal radio remote control and
black decorative ring
1NL 008 090-831
Type approval 877, ECE R19 B series 02
22
Position lights
Position light
for horizontal surface-mounting
Black housing
with 0.5 m cable, 10–33 V 2PF 959 570-401*
with 5 m cable, 10–33 V 2PF 959 570-411*
Type approval 7575 and 031721
Position light
for horizontal surface-mounting
White housing
with 0.5 m cable, 10–33 V 2PF 959 570-427*
with matching 25° adapter base, white
(order separately)
8HG 959 571-007
12 V/0.5 W, current consumption = approx. 0.04 A
Type approval 7575 and 031721
Position light
for horizontal or vertical flush mounting
with 0.5 m cable, 10–33 V 2PF 959 590-401*
with 5 m cable, 10–33 V 2PF 959 590-411*
12 V/0.5 W, current consumption = approx. 0.04 A
Type approval 7597 and 031721
Position light
for surface-mounting, 12 V, modern night-time design and high level of safety
thanks to maximum illuminated area
6.3 mm contact pin
horizontal 2PG 343 690-107
vertical 2PG 343 690-117
500 mm cable
horizontal 2PG 343 690-301
vertical 2PG 343 690-317
Type approval 5853
with cable with 6.3 mm
contact
* Please see the note on pages 8 and 9 regarding LED indicators and LED indicator failure check.
23
Fro
nt
lig
hti
ng
Position lights
Position light with reflector
for horizontal surface-mounting, with 2 LEDs
12 V/0.3 W, current consumption = approx. 0.03 A 2PG 964 295-121*
Type approval 0301
Position light with reflector
for horizontal or vertical flush-mounting,
with pre-fitted 12 V/5 W bulb and seal
12 V 2PG 964 295-011
Position light without reflector (not shown)
for horizontal or vertical flush-mounting
12 V 2PF 964 295-021
Type approval 9806 and 811
Position light
for horizontal surface-mounting,
with 20° adapter base included loose
12 V/0.3 W, current consumption = approx. 0.03 A 2PF 964 295-257*
Type approval 817
Position light with reflector
for horizontal or vertical flush-mounting,
with pre-fitted 12 V/3 W bulb
12 V 2PF 962 964-041
Seal (order separately) 9GD 963 281-001
Grommet (order separately) 9GT 963 129-001
Type approval 7499 and 3153
24
a) Chrome-plated circular finisher
for surface-mounting 8XU 008 405-031
b) Position light using LED technology
for surface-mounting
12 V/1.8 W, current consumption = approx. 0.15 A 2PF 008 405-061*
Type approval 1696
a) b)
Indicator
with fitted amber bulb 12 V/21 W 2BA 008 221-107
Position light
(not shown, design like the indicator) 2PF 008 221-011
Harness with grommet 8KA 152 134-007
Type approval 878 / 879
Indicator and position lights
Position light
for surface-mounting, clear lens, 2 x M5 fastening screws
12 V 2PF 001 259-631
Intermediate piece
for surface-mounting at 45° (order separately) 8HG 002 247-001
Type approval 21624
Position light without reflector
for flush-mounting, clear lens, black plastic housing with adhesive film for
sticking to the body. 2-pole cable, 150 mm long, open cable ends, with 2 white
LEDs
12 V/0.6 W, current consumption = approx. 0.05 A 2PF 340 825-041*
Type approval 11371
* Please see the note on pages 8 and 9 regarding LED indicators and LED indicator failure check.
� SAE type approval for vehicles < 2,032 mm width
� SAE type approval for vehicles > 2,031 width
25
Fro
nt
lig
hti
ng
Oval light series Type approval
for horizontal or vertical surface-mounting, with grommet.
Note: Depending on the installation position, the water drain
opening must be broken out.
ECE SAE
(USA)
Indicator, without bulb
12 / 24 V 2BA 343 130-057 X � �
Indicator/position light, without bulb
12 / 24 V 2BE 343 130-007 X
Type approval 6550 and 10202
Indicator and position lights
* Please see the note on pages 8 and 9 regarding LED indicators and LED indicator failure check.
� SAE type approval for vehicles < 2,032 mm width
� SAE type approval for vehicles > 2,031 width
60 mm Premium lights Type approval
with clear lens ECE SAE
(USA)
Indicator with amber bulb
12 V 2BA 009 001-071 X
12 V 2BA 009 001-091 �
with silver-coloured bulb
12 V 2BA 009 001-201 X
Position light
12 V 2PF 009 001-081 X �
Type approval 6546 and 7613
60 mm Premium LED light Type approval
Position light, for flush-mounting, with 12 LEDs ECE SAE
(USA)
12 V 2PF 009 001-421* X �
Type approval 12390
90 mm Type approval
ECE SAE
(USA)
Indicator with amber bulb
12 V 2BA 965 039-061 X � �
Position light
12 V 2PF 965 039-071 X � �
Type approval 10215
26
These headlight cleaning systems have ECE type approval for the following
series of Hella headlights when installed according to the installation instructions
provided.
Ø 50 mm Ø 90 mm Ø 100 mm
1BL 009 071-… 1KO 008 191-... 1BL 007 834-...
1ML 009 071-… 1KO 008 192-... 1KL 007 834-...
1F0 008 390-… 1BL 008 193-...
1BL 008 194-...
1AL 009 997-...
1LL 009 997-...
Headlight cleaning systems
Legislation prescribes the use of a lens cleaning system when
Xenon low beam headlights are used. (The system can also be
used for halogen headlights and spotlights.)
Hella cleaning systems work using the jet-water principle which
manages without wipers and brushes in that the kinetic energy
from large water drops blasts dirt particles from the lens and
rinses them away.
with fixed nozzles
12 V 8WS 008 549-001
as 8WS 008 549-001,
but with longer pipes
12 V 8WS 008 549-011
Ultrasonic headlight range adjustment (LWR)
The ultrasonic system is a universal headlight range adjustment
system for use as original equipment or for retrofi tting to
vehicles with Xenon headlights. The system sensor measures
the distance from the underside of the vehicle to the road
surface and forwards the signal to the central control unit,
which then achieves optimum setting of the Xenon headlights
via the setting motors.
See the installation instructions for more detailed information.
12 V, one sensor (passenger car) 8XX 010 315-001
12 V, two sensors (3.5 t) 8XX 010 315-101
with telescopic individual nozzles
12 V 8WT 008 549-101
with telescopic double nozzles
12 V 8WT 008 549-201
Ultrasonic system for headlight range adjustment – overview
Control unit
Rear sensor
Optional:
front sensor
LWR actuator
Adjustment cable
Parking light
Ground
27
Fro
nt
lig
hti
ng
Rear lighting
Combination rearlights Page 29 – 39
Clearance lights Page 40 – 41
Safety stoplights Page 42 – 43
Reflector Page 43 – 44
Number plate lights Page 44 – 45
28
Combination rearlight Caraluna II Plus Type approval
for horizontal flush-mounting, with 12 V bulbs, with combined
indicator and reverse light module, can also be used as an
upgrade of the basic version 2.. 343 419-...
ECE SAE
(USA)
with triangular reflector
left 2VP 343 590-017 ����� X
right 2VP 343 590-027 ����� X
with round reflector
left 2VP 343 590-037 ���� X
right 2VP 343 590-047 ����� X
Type approval 9836
� SAE type approval for vehicles < 2,032 mm width
� SAE type approval for vehicles > 2,031 width
� Taillight � Stoplight � Indicator � Rear fog light � Reverse light
Reflector Side-marker light with reflector � Licence plate light
Combination rearlight Caraluna II Plus Chromium Type approval
for horizontal flush-mounting, with 12 V bulbs, in brilliant
finish, with combined indicator and reverse light module, can
also be used as an upgrade of the basic version 2.. 343 419-
..., without side marker reflector light
ECE SAE
(USA)
with triangular reflector
left 2VP 343 590-057 ����� X
right 2VP 343 590-067 ����� X
with round reflector
left 2VP 343 590-077 ����� X
right 2VP 343 590-087 ����� X
Type approval 10217
Combination rearlight Caraluna II Chromium Type approval
for horizontal flush-mounting, with 12 V brilliant-finish bulbs,
without side marker reflector light
ECE SAE
(USA)
with triangular reflector
left 2VA 341 419-097 ���� X
right 2VP 341 419-107 ���� X
left 2VP 341 419-157 ���� X
right 2VA 341 419-167 ���� X
with round reflector
left 2VA 341 419-077 ���� X
right 2VP 341 419-087 ���� X
left 2VP 341 419-177 ���� X X � �
right 2VA 341 419-187 ���� X X � �
Type approval 10217
Combination rearlights
29
Re
ar
lig
hti
ng
Caraluna Vertical Type approval
for vertical flush-mounting, with 12 V bulbs ECE SAE
(USA)
Right-hand traffic
left 2SD 343 440-017 ���� X
right 2SD 343 440-027 ���� X
Left-hand traffic
left 2SD 343 440-037 ���� X
right 2SD 343 440-047 ���� X
Type approval 0501
Combination rearlight Caraluna II Type approval
for horizontal flush-mounting, with 12 V bulbs ECE SAE
(USA)
with triangular reflector
left 2VA 341 419-017 ���� X
right 2VA 341 419-027 ��� X
left 2VP 341 419-037 ���� X
right 2VP 341 419-047 ���� X
right 2VA 341 419-067 ���� X
with round reflector
left 2VA 341 419-117 ���� X
right 2VA 341 419-147 ���� X
right 2VP 341 419-127 ���� X X � �
left 2VP 341 419-137 ���� X X � �
Type approval 9836
Caraluna Modular combination rearlight Type approval
for vertical flush-mounting, with 12 V bulbs ECE SAE
(USA)
with combined indicator and reverse light module, with
integrated red side marker light
Red lens
left 2VP 343 520-017 ����� X
right 2VP 343 520-027 ����� X
Clear lens
left 2VP 343 520-057 ����� X
right 2VP 343 520-067 ����� X
Type approval 12677
Combination rearlights
30
LED combination rearlight Type approval
12 V, for horizontal flush-mounting,
brilliant finish
ECE SAE
(USA)
red lens 2SB 008 982-307 �� X
clear lens 2SB 008 982-367 �� X
12 V/3 W, current consumption = approx. 0.25 A
clear lens 2BA 008 982-347* � X
12 V / 2 W, current consumption = approx. 0.17 A
* with impulse for indicator failure check
Type approval 10880
Accessories
for LED and bulb versions
Seal 8GD 159 740-007
Combination rearlight Type approval
12 V, for horizontal flush-mounting,
brilliant finish
ECE SAE
(USA)
2SA 008 805-007 � X X � �
for double attachment 2DA 008 805-017 � X X � �
for double attachment 2SB 008 805-027 �� X X � �
for double attachment,
with clear lens
2BA 008 805-057�
X
2NE 008 805-037 � X
2ZR 008 805-047 � X X � �
Type approval 10151
Combined taillight/stop light/indicator
for horizontal or vertical surface mounting, with 24 LEDs, clear lens, with ECE
and EMC type approval
Multi-voltage 9–32 V, with 200 mm cable and 4-pole
AMP plug 282 106-1, mating plug to be used AMP
282 088-1
2SD 343 910-017*
with integrated AMP plug 282 106-1 in the housing 2SD 343 910-027*
Taillight: 12 V / 0.5 W, current consumption = approx. 0.04 A
Stoplight: 12 V / 1 W, current consumption = approx. 0.08 A
Indicator: 12 V / 1.5 W, current consumption = approx. 0.125 A
Type approval 12393 and 035109
* Please see the note on pages 8 and 9 regarding LED indicators and LED indicator failure check.
� SAE type approval for vehicles < 2,032 mm width
� SAE type approval for vehicles > 2,031 width
� Taillight � Stoplight � Indicator � Rear fog light � Reverse light
Reflector Side-marker light with reflector � Licence plate light
Combination rearlights
31
Re
ar
lig
hti
ng
LED tail-stoplight Type approval
for surface-mounting ECE SAE
(USA)
with clear lens
Multi-voltage 9–32 V 2SB 344 200-027* �� X
with red lens
Multi-voltage 9–32 V 2SB 344 200-081* �� X
Taillight: 12 V/1 W, current consumption = approx. 0.08 A
Stoplight: 12 V/3 W, current consumption = approx. 0.25 A
Type approval 12658 and 03 4895
LED indicator Type approval
for rear surface-mounting, with patented electronics for
indicator failure check
ECE SAE
(USA)
with clear lens
Multi-voltage 9–32 V 2BA 344 200-037* � X
Indicator: 12 V / 3 W, current consumption = approx. 0.25 A
Type approval 12658 and 03 4895
LED rear fog light Type approval
for surface-mounting ECE SAE
(USA)
with clear lens
Multi-voltage 9–32 V 2NE 344 200-061* � X
with red lens
Multi-voltage 9–32 V 2NE 344 200-091* � X
Rear fog light: 12 V/2 W, current consumption = approx. 0.17 A
Type approval 14198 and 03 4895
= GGVS/ADR tested
LED tail-stop-indicator light Type approval
for surface-mounting, redesign of the 964 169 series, with
ECE, EMC and GGVS type approval, 24 LEDs, with patented
electronics for indicator failure check
ECE SAE
(USA)
with clear lens
Multi-voltage 9–32 V 2SD 344 200-001* ��� X
with red/transparent lens
Multi-voltage 9–32 V 2SD 344 200-071* ��� X
Indicator: 12 V / 2 W, current consumption = approx. 0.17 A
Taillight: 12 V/1 W, current consumption = approx. 0.08 A
Stoplight: 12 V/2 W, current consumption = approx. 0.17 A
Type approval 12371 and 12658 and 03 4895
Combination rearlights
32
LED reverse light Type approval
for surface-mounting ECE SAE
(USA)
with clear lens
Multi-voltage 9–32 V 2ZR 344 200-051* � X
Reverse light: 12 V/2 W, current consumption = approx. 0.17 A
Type approval 14198 and 03 4895
* Please see the note on pages 8 and 9 regarding LED indicators and LED indicator failure check.
� SAE type approval for vehicles < 2,032 mm width
� SAE type approval for vehicles > 2,031 width
� Taillight � Stoplight � Indicator � Rear fog light � Reverse light
Reflector Side-marker light with reflector � Number plate light
Combination rearlight Type approval
12 V, for surface or flush-mounting, brilliant finish ECE SAE
(USA)
2BA 964 169-507 653 � X X � �
2SB 964 169-537 816 �� X X � �
2ZR 964 169-517 2312 � X X � �
2NE 964 169-527 3809 � X
Combination rearlight Type approval
12 V, for surface or flush-mounting Depending on the
installation position, the water drain opening must be broken
out.
ECE SAE
(USA)
2DA 964 169-001 808 � X X � �
2BA 964 169-011 648 � X X � �
2NE 964 169-021 3808 � X X � �
2ZR 964 169-031 2311 � X X � �
2BA 964 169-041 9804 �� X
2BN 964 169-051 9801 �� X X �
2TA 964 169-061 9805 �� X X �
2BE 964 169-071* 9802 X
2SW 964 169-081 9803 �� X X �
2SA 964 169-091 810 � X X � �
2SD 964 169-111 9903 ��� X
2TA 964 169-137 ��� �
2TA 964 169-147 �� �
2SB 964 169-287 815 �� X X � �
* Indicator/position light
Combination rearlights
33
Re
ar
lig
hti
ng
Combination rearlights
12 V and 24 V, for flush-mounting
a) Taillight, red lens 2XA 008 221-021 �
with fitted bulb 12 V/5 W 2SA 008 221-127 �
Stoplight, red lens 2XA 008 221-021 �
with fitted bulb 12 V/21 W 2DA 008 221-167 �
Type approval 1048 and 1049
b) Indicator 12 / 24 V, grey lens 2BA 008 221-041 �
with fitted amber bulb 12 V/21 W 2BA 008 221-147 �
Type approval 1051, 878 and 879
c) Rear fog light 12 / 24 V, red lens 2NE 008 221-031 �
with fitted bulb 12 V/21 W 2NE 008 221-137 �
Type approval 1050
d) Reverse light 12 / 24 V, grey lens 2ZR 008 221-051 �
with fitted bulb 12 V/21 W 2ZR 008 221-157 �
Type approval 1052
Accessories for light series 008 221-...
Harness with grommet 8KA 152 134-007
Grommet separate 9GT 137 236-007
a, c
b, d
1) Chrome-plated circular finisher
12 V 8XU 008 405-031
2) LED circular tail-clearance light
for flush-mounting, with 12 red LEDs, clear lens, 1.8 W
12 V 2SA 008 405-021*
LED circular tail-stoplight
for flush-mounting, with 12 red LEDs, clear lens, 2.1 W
12 V 2SB 008 405-101*
3) Circular reflector
for flush-mounting 8RA 008 405-001
Type approval 1197 and 1196
Examples for combination possibilities
1) Rear lighting 2BA 008 221-041 �
and 2SA 008 405-021 �
2) Rear lighting 2XA 008 221-021 �
and 8RA 008 405-001
Accessories
Heat baffle plate
(necessary at > 50 °C ambient temperature)
9XB 161 749-007
1)
2)
3)
1)
2)
* Please see the note on pages 8 and 9 regarding LED indicators and LED indicator failure check.
** With impulse for indicator failure check
Combination rearlights
34
� SAE type approval for vehicles < 2,032 mm width
� SAE type approval for vehicles > 2,031 width
� Taillight � Stoplight � Indicator � Rear fog light � Reverse light
Reflector Side-marker light with reflector � number plate light
60 mm Premium lights Type approval
with pre-fitted bulbs 12 V, inc. design ring ECE SAE
(USA)
Red lens 2SA 009 001-047 � X
Red lens 2DA 009 001-057 � X
Red lens 2SB 009 001-067 �� X
Grey lens 2BA 009 001-007 � X
with Silvervision bulb 2BA 009 001-191 � X
Red lens 2NE 009 001-027 � X X
Grey lens 2ZR 009 001-017 � X X
Type approval 3917, 6546, 7613 and 23255
Macro reflector
12 V, red 8RA 009 001-037 X X
Type approval 3189
12 Power TOPLED LEDs Type approval
for surface-mounting at the front,
12 V / 3 W current consumption approx. 0.25 A
ECE SAE
(USA)
12 V, clear lens 2SB 009 001-401 �� X
12 V, clear lens 2BA 009 001-411 � X
24 V, clear lens 2BA 009 001-431** � X
Type approval 12390
Design ring Ø 71.6 mm
suitable for 60 mm light modules with Ø 71.6 mm
(part number ... 009 001-... except for LED versions), perfect high-sheen finish
with one “click”
high-sheen chrome-plated 9HB 161 122-012
silver 9HB 161 122-007
Premium silver 9HB 164 168-002
Combination example
for a combination rearlight ... 009 001-...
with design ring Ø 71.6 mm high-sheen chrome-plated 9HB 161 122-012
inc. design ring
inc. design ring
Combination rearlights
35
Re
ar
lig
hti
ng
Accessories 60 mm combination rearlights
Adapter ring for frontal screw attachment for combination rearlights
Ø 60 mm
Direct attachment and attachment in the circular module
black 9XD 161 119-007
Adapter ring
for the attachment of LED lights or the reflector in the circular module
black (not shown) 9XD 161 119-017
Circular modules Type approval
available with a choice of clear or red cover lens ECE SAE
(USA)
Circular module, 12 V
Red lens 2SB 009 362-041* �� X
Clear lens 2SB 009 362-021* �� X
Red lens 8RA 009 362-001 X
Type approval 7747 and 7748
Circular module without lighting function
for surface-mounting, light units with identical design
Red lens 8XU 009 362-101
Clear lens 8XU 009 362-111
Design ring Ø 118 mm
suitable for circular module 009 362
perfect high-sheen finish with one “click”
high-sheen chrome-plated 9HB 163 085-012
silver 9HB 163 085-001
Combined tail-stop-indicator light SAE Type approval
12 V / 4.8 W current consumption ca. 0.4 A , for rear flush-
mounting, clear lens, with 24 red LEDs, suitable for the light
series 009 362-..., 009 001-...
ECE SAE
(USA)
2SD 009 362-201* X � �
Combination rearlights
36
Combination rearlight Ø 90 mm Type approval
for flush-mounting, brilliant finish, screw heads not visible,
with fitted bulbs, reversing light and rear indicators with
smoked glass lens, also available as daytime running light
ECE SAE
(USA)
Attachment possible from the front using the
enclosed clips or from the rear using screws
12 V 2SA 965 039-001 � X X � �
12 V 2DA 965 039-011 � X X �
12 V 2BA 965 039-021/7 � X X �
12 V 2NE 965 039-031/7 � X X � �
12 V 2ZR 965 039-041/7 � X X � �
12 V 2SB 965 039-051/7 �� X X �
with mounted attachment clips
12 V 2SA 965 039-307 � X X � �
12 V 2DA 965 039-317 � X X �
12 V 2BA 965 039-347 � X X �
12 V 2NE 965 039-327 � X X � �
12 V 2ZR 965 039-337 � X X � �
12 V 2SB 965 039-357 �� X X �
Type approval 10217
* Please see the note on pages 8 and 9 regarding LED indicators and LED indicator failure check.
� SAE type approval for vehicles < 2,032 mm width
� SAE type approval for vehicles > 2,031 width
� Taillight � Stoplight � Indicator � Rear fog light � Reverse light
Reflector Side-marker light with reflector � Number plate light
EuroLED Type approval
1 Power-LED, for surface-mounting, cast in one piece with
the base plate, electrical connection through cable 2500 mm
long, multi-voltage 9–33 V
ECE SAE
(USA)
12 V/2.5 W, current consumption = approx. 0.21 A
2SB 959 821-601* �� X
2ZR 959 820-601* � X
2BA 959 822-601* � X
* with impulse for indicator failure check, SAE versions on request
12 V/4 W, current consumption = approx. 0.33 A
2NE 959 821-201* � X
Type approval 10208 and 021135
Combination rearlights
37
Re
ar
lig
hti
ng
LED tail-stop-indicator light
only for vertical flush-mounting, with 24 LEDs, 12 red LEDs for stoplight ,
with 4-pole Deutsch plug integrated in the housing, with patented electronics for
indicator failure check, with ECE and EMC type approval
9 V / 0.9 W, current consumption = approx. 0.1 A 2SD 343 390-401*
32 V / 1.2 W, current consumption = approx. 0.04 A 2SD 343 390-407*
Type approval 11785, 12381 and 034631
"Oval" combination rearlight
for horizontal and vertical surface-mounting, clear lens, 24 LEDs, can be used
on the right and left, can be turned through 180°, 2 bodywork fastening screws
(diagonal arrangement) with 100 mm harness, multi-voltage 9–32 V
Type approval
ECE SAE
(USA)
2SD 343 390-017* ��� X
12 red LEDs for stoplight:
12 V/1 W, current consumption = approx. 0.08 A
12 red LEDs for taillight (reduced power):
12 V/0.2 W, current consumption = approx. 0.02 A
12 amber LEDs for indicator (SAE version 12 red LEDs) with
patented electronics for indicator failure check:
12 V/1.5 W, current consumption = approx. 0.13 A
2BA 343 390-071* � X
12 V/1.5 W, current consumption = approx. 0.13 A
24 amber LEDs; (SAE version 24 red LEDs) with patented
electronics for indicator failure check
2SB 343 390-091* �� X
Stoplight: 12 V/1 W, current consumption = approx. 0.08 A
Taillight: 12 V/0.2 W, current consumption = approx. 0.02 A
(reduced power)
Combination rearlights
38
“Oval Light” combination rearlight Type approval
for horizontal and vertical flush-mounting, lens with stripe
pattern, housing with black edging all the way round,
completely pre-fitted, with 100 mm cable and pre-fitted
12 V bulb
ECE SAE
(USA)
left 2SA 343 400-217 823 � X
right 2SA 343 400-227 823 � X
left 2DA 343 400-237 821 � X
right 2DA 343 400-247 821 � X
left 2ZR 343 400-297 2314 � X
right 2ZR 343 400-307 2314 � X
left 2NE 343 400-277 3812 � X
right 2NE 343 400-287 3812 � X
left 2BA 343 400-257 655 � X
right 2BA 343 400-267 655 � X
left 2SB 343 400-317 822 �� X
right 2SB 343 400-327 822 �� X
“Oval” combination rearlight - brilliant-finish
appearance
Type approval
suitable for horizontal and vertical flush and surface-
mounting, right or left (= turn light through 180°), can be used
for 12 V and 24 V operation, before mounting, break out the
water drain hole and insert seal, black housing, clear cover
lens
ECE SAE
(USA)
2SB 343 130-021/7 7698 �� X � �
2BA 343 130-051/7 6550 � X � �
2NE 343 130-031/7 3919 � X
2ZR 343 130-041/7 23257 � X � �
Combination rearlights
* Please see the note on pages 8 and 9 regarding LED indicators and LED indicator failure check.
� SAE type approval for vehicles < 2,032 mm width
� SAE type approval for vehicles > 2,031 width
� Taillight � Stoplight � Indicator � Rear fog light � Reverse light
Reflector Side-marker light with reflector � Number plate light
39
Re
ar
lig
hti
ng
Clearance light
for vertical surface-mounting, red/white
with grey base plate, with 12 V bulb
left 2XS 008 479-001
right 2XS 008 479-011
red, PO function silver-coloured
left 2XS 008 479-107
right 2XS 008 479-117
left, without bulb 2XS 008 479-061
right, without bulb 2XS 008 479-071
with white base plate
left 2XS 008 479-081
right 2XS 008 479-091
Type approval 1201
Clearance light
with pre-fitted 12 V bulb and seal,
for horizontal or vertical flush-mounting
oval 2XS 964 295-031
Type approval 812
LED clearance light
for horizontal surface-mounting, 2 LEDs, 12 V
with seal and cable 5,000 mm long
oval 2TM 964 295-101*
12 V/0.5 W, current consumption = approx. 0.04 A
Type approval 0302
LED clearance light
for surface-mounting, modern night-time design and high level of safety
thanks to maximum illuminated area, 12 V
6.3 mm contact pin, horizontal 2TM 343 690-157*
6.3 mm contact pin, vertical 2PG 343 690-167*
500 mm cable, horizontal 2PG 343 690-351*
500 mm cable, vertical 2PG 343 690-361*
Type approval 7597 and 031721
with 6.3 mm
contact
with cable
Clearance lights
40
LED clearance light
for horizontal or vertical surface-mounting, with 2 LEDs and light guide strip in
red, 2 screw holes ø 5.4 mm for fastening screws
12 V 2XS 008 078-011*
12 V/1.4 W, current consumption = approx. 0.12 A
Type approval 0515
LED clearance light
for horizontal surface-mounting, 2 LEDs, 8–28 V
500 mm cable 2XA 959 560-401*
5,000 mm cable 2XA 959 560-411*
12 V/0.5 W, current consumption = approx. 0.04 A
Type approval 7574 and 031721
LED clearance light
for horizontal or vertical surface-mounting, with reflector, 12 V,
2 holes for fastening screws B 4.2
500 mm cable 2TM 008 645-081*
5,000 mm cable 2TM 008 645-091*
12 V/0.6 W, current consumption = approx. 0.05 A
* With horizontal surface-mounting, the LED field must point to the outer vehicle
edge. With vertical surface-mounting, the LED field may point upwards
or downwards. (Clearance light can also be used as a taillight with reflector.)
Type approval 1395 and 1398
LED clearance light
for horizontal surface-mounting, 2 LEDs, 8–28 V
500 mm cable 2XA 959 790-401*
5,000 mm cable 2XA 959 790-411*
12 V/0.5 W, current consumption = approx. 0.04 A
Type approval 7597 and 031721
Clearance lights
* Please see the note on pages 8 and 9 regarding LED indicators and LED indicator failure check.
41
Re
ar
lig
hti
ng
LED safety stoplight
for horizontal flush-mounting, with 12 red LEDs and connected
cable and 2-pole AMP plug
12 V, red lens 2DA 959 071-537*
12 V, clear lens 2DA 959 071-037*
12 V/2 W, current consumption = approx. 0.17 A
Type approval 7547
LED safety stoplight
for horizontal or vertical surface-mounting, with 10 red LEDs,
with 3000 mm cable, design height 9 mm
red lens
with screw attachment 2DA 343 106-007*
self-adhesive (for smooth and clean surfaces) 2DA 343 106-207*
12 V/0.7 W, current consumption = approx. 0.06 A
Type approval 7696
LED safety stoplight
for horizontal surface-mounting, with 12 red LEDs, in brilliant finish, with 3D
effect thanks to each LED being embedded in a separate reflector,
with 200 mm cable
red lens
12 V 2DA 343 800-007*
12 V, with rubber base 2DA 343 800-057*
12 V/1.8 W, current consumption = approx. 0.15 A
Type approval 7715
Safety stoplight in combination with rear view camera, page 63
Safety stoplights
LED safety stoplight
for horizontal or vertical surface-mounting, with 10 red LEDs,
with 3000 mm cable, design height 9 mm
with smoked glass lens
with screw attachment 2DA 343 106-021*
self-adhesive (for smooth and clean surfaces) 2DA 343 106-221*
12 V/0.7 W, current consumption = approx. 0.06 A
Type approval 7696
42
Safety stoplight
for horizontal flush-mounting, with pre-fitted 12 V bulbs, 2.3 W
red lens
with PE foam seal, coated on both sides
with adhesive
2DA 008 136-027
Screw attachment from the front through the lens (screws
are not included in the scope)
2DA 008 136-017
Type approval 02799
Safety stoplight
for horizontal surface-mounting, with 12 V bulbs, 2.3 W
cable 146 751-00 included loose
2DA 008 136-031
Accessories (order separately):
Cable with grommet 8KA 146 751-007
Cable without grommet 8KA 144 707-007
Grommet only 9GT 146 757-007
Type approval 02799
Reflector
self-adhesive
red 8RA 002 014-081
yellow 8RA 002 014-101
white 8RA 002 014-091
Type approval 023535
Reflector
self-adhesive
red 8RA 003 326-031
yellow 8RA 003 326-041
white 8RA 003 326-051
Type approval 0292031
Reflector
for horizontal or vertical surface-mounting,
self-adhesive
red 8RA 343 160-007
yellow 8RA 343 160-027
white 8RA 343 160-017
Type approval 3190
* Please see the note on pages 8 and 9 regarding LED indicators and LED indicator failure check.
Safety stoplights and refl ectors
43
Re
ar
lig
hti
ng
Number plate light
for flush-mounting above or below the number plates 520 x 120 mm
(2 or 3 lights) and 340 x 240 mm (2 lights), 2 x M4 fastening screws, installation
depth: approx. 25 mm, clear lens
with chrome brilliant-finish edge 2KA 001 378-001
with silver-coloured edge, without fastening screws 2KA 001 378-041
with black edge and 12 V bulb 2KA 001 378-127
Type approval 12958
Number plate light
for flush-mounting above or below (2 lights) the number plate 520 x 120 mm,
2 holes for fastening screws, installation depth approx. 20 mm, clear lens
with 12 V bulb 2KA 004 331-061
Type approval 22890
Reflector
with 2 holes for fastening screws
red 8RA 343 220-017
self-adhesive, red 8RA 343 220-007
Type approval 023191
Reflector
2 holes, Ø 6 mm, for fastening screws.
red 8RA 002 020-001
Type approval 02346
Rear fog light
with integrated reflector
12 V, inc. bulb 2NE 344 610-007
12 V, without bulb 8RA 344 610-017
Type approval 5857
Refl ectors and Number plate lights
44
LED licence plate light
for surface-mounting left and right next to the licence plate 520 x 120 mm, with
2.5 m cable, bracket for mounting the light to the body, cover, fastening screws,
cover caps for screws as well as a spacer for different mounting situations,
multi-voltage 10–33 V; with 2 LEDs 0.5 W
clear lens, black housing 2KA 959 640-607*
12 V/0.55 W, current consumption = approx. 0.04 A
Type approval 4068 and 031721
LED licence plate light
12 V, for surface-mounting on the right or left next to the licence plate, with
4 LEDs, clear lens, housing made of black plastic, with CE and ECE type
approval, with flat plug 6.3 x 0.8
12 V/1 W, current consumption = approx. 0.08 A
for 520 x 120 mm licence plates, only 1 light required for
illumination
2KA 010 278-321*
Type approval 2609
for 340 x 240 und 280 x 200 mm licence plates 2KA 010 278-421*
Type approval 2911
LED licence plate light
for flush-mounting above the licence plate 520 x 120 mm, 2 lights required
for illumination, with black plastic frame, with flat plug 6.3 x 0.8
12 V/1 W, current consumption = approx. 0.08 A 2KA 010 278-311*
Type approval 2609
LED licence plate light
12 V, for flush-mounting above the licence plate, with frame, with flat plug
6.3 x 0.8
for 340 x 240 and 280 x 200 mm licence plates, only 1
light required for illumination
2KA 010 278-421*
Type approval 2911
= GGVS/ADR tested
* Please see the note on pages 8 and 9 regarding LED indicators and LED indicator failure check.
Licence plate lights
45
Re
ar
lig
hti
ng
Side lighting
Side marker lights Page 47 – 48
Auxiliary indicators Page 49
46
Side marker light
for horizontal flush-mounting, with reflector, with seal, with 12 V bulb, with ECE
and SAE type approval
12 V/5 W, amber 2PS 964 295-001
Red SMLR in accordance with SAE Page 40
Type approval 9807
* Please see the note on pages 8 and 9 regarding LED indicators and LED indicator failure check.
Side marker light
for horizontal or vertical flush-mounting, with reflector,
with 12 V bulb, with white base plate, with ECE and SAE type approval
12 V/3 W 2PS 962 964-037
Seal (order separately) 9GD 963 281-001
Grommet (order separately) 9GT 963 129-001
Type approval 0004 and 3153
LED side marker light
for horizontal surface-mounting, with 2 LEDs, with reflector,
with cable 195 mm long, with double-sided adhesive tape on the base plate and
“adapting cams”
12 V/1.0 W, current consumption = approx. 0.08 A 2PS 009 226-027*
Type approval 10236
with cable with 6.3 mm contact
LED side marker light
for surface-mounting, modern night-time design and high level of safety
thanks to maximum illuminated area, 12 V
6.3 mm contact pin, orange frame 2PS 343 690-011*
6.3 mm contact pin, white frame 2PS 343 690-001*
6.3 mm contact pin, black frame 2PS 343 690-061*
500 mm cable, white frame 2PS 343 690-201*
Rubber seal 9GD 343 697-007
Grommet 9GT 343 697-002
Type approval 5853
Further versions on request.
Side marker lights
47
Sid
e lig
hti
ng
Side marker light set Type approval
for horizontal flush-mounting, for retrofitting to passenger
cars < 6 m, 4 units each, with LED technology
ECE SAE
(USA)
Amber lenses,
silver-grey finishers
2PS 008 138-801* X X
Grey lenses,
black finishers
2PS 008 138-821* X X
Grey lenses,
silver-grey finishers
2PS 008 138-811* X X
12 V/0.7 W, current consumption = approx. 0.06 A
Type approval 9110
Side marker light set Type approval
for horizontal and vertical flush-mounting, 4 units each,
with amber 12 V / 5 W bulb
ECE SAE
(USA)
in arrow design 2PS 008 541-801* X
Type approval 1223
For vehicles < 6 m in length and/or < 3.5 t, auxiliary indicators
of category 5 are prescribed, and for vehicles > 6 m in length
and/or > 3.5 t, auxiliary indicators of category 6 are prescribed.
Information
Side marker lights
LED side marker light
for horizontal flush-mounting, with 2 LEDs, with reflector, with seal and two
cables 500 mm long, with ECE and SAE type approval
with fastening screws 2PS 964 295-067*
self-adhesive, without seal,
with caps for the screw holes
2PS 964 295-081*
12 V/0.5 W, current consumption = approx. 0.04 A
Type approval 0202
48
Auxiliary indicators
LED auxiliary indicator Type approval
for horizontal flush-mounting, category 5, simple gluing into
prepared mirror, can also be used as a universal auxiliary
indicator
ECE SAE
(USA)
2BM 008 771-007* X X
12 V/0.7 W, current consumption = approx. 0.06 A
Type approval 011423
Auxiliary indicator
Category 5 for 12 V, for flush-mounting on the side
small, space-saving 2BM 003 563-111
Type approval 42621
For vehicles < 6 m in length and/or < 3.5 t, auxiliary indicators
of category 5 are prescribed, and for vehicles > 6 m in length
and/or > 3.5 t, auxiliary indicators of category 6 are prescribed.
Information
Auxiliary indicator
Category 5 and 6 for 12 V and 24 V / 21 W, for surface-mounting at the side
left 2BM 006 692-017
right 2BM 006 692-027
Type approval 0152621
Auxiliary indicator
Category 6 for 12 V and 24 V / 21 W, extremely flat design, for surface-mounting
at the side
Harness for non splashwater-proof area 8KA 157 425-007
Amber lens 2BM 008 355-001
Type approval 1059
Clear lens 2BM 008 355-017
Type approval 1848
* Please see the note on pages 8 and 9 regarding LED indicators and LED indicator failure check.
� SAE type approval for vehicles < 2,032 mm width
� SAE type approval for vehicles > 2,031 width
49
Sid
e lig
hti
ng
Interior lighting
Ceiling lights Page 51 – 56
Orientation lights Page 57 – 59
Reading lights Page 60
Ambient lights Page 61
50
Round LED spotlight, fi xed
Voltage: multi-voltage 10 – 31 V, clear lens, 1 white Power LED Installation:
choice of screw-type or spring-clamp fastening,
Current consumption spot at 12 V / 2.5 W = approx. 0.20 A
Flush-mounting, fixed, wide illumination (40°)
Finisher colour*:
white 2JA 344 040-701
black 2JA 344 040-711
silver 2JA 344 040-721
Flush-mounting, fixed, spot-type illumination (20°)
Finisher colour*:
white 2JA 344 040-741
black 2JA 344 040-751
silver 2JA 344 040-761
Round finisher with angled edges
black 9AB 344 057-001
white 9AB 344 057-011
silver 9AB 344 057-021
chrome 9AB 344 057-061
gold 9AB 344 057-071
Round finisher with rounded edges
chrome 9AB 344 045-061
gold 9AB 344 045-071
Metal frame, stainless polished 9AB 959 505-501
Metal frame, stainless,satin finished 9AB 959 505-561
Square finisher with anqled edges
black 9AB 344 058-001
white 9AB 344 058-011
silver 9AB 344 058-021
chrome 9AB 344 058-061
gold 9AB 344 058-071
* further finisher colours (e.g. real-wood look) or ambient Celis® light guide ring
(e. g. blue, red) on request
Round LED spotlight, adjustable
Voltage: multi-voltage 10 – 31 V, clear lens, 1 white Power LED Installation:
choice of screw-type or spring-clamp fastening, Current consumption spot at
12 V / 2.5 W = approx. 0.20 A
Flush-mounting, adjustable, wide illumination (40°)
Finisher colour*
white 2JA 343 790-301
black 2JA 343 790-311
silver 2JA 343 790-341
Flush-mounting, adjustable, spot-type illumination (20°)
Finisher colour*
white 2JA 343 790-401
black 2JA 343 790-411
silver 2JA 343 790-441
additional with white, ambient Celis® light guide ring, current consumption Celis®
light guide ring at 12 V / 0.5 W = approx. 0.04 A
Flush-mounting, adjustable, wide illumination (40°)
Finisher colour*
white 2JA 343 790-701
black 2JA 343 790-711
silver 2JA 343 790-741
Flush-mounting, adjustable, spot-type illumination (20°)
Finisher colour*
white 2JA 343 790-601
black 2JA 343 790-611
silver 2JA 343 790-641
* further trim colours (e.g. real-wood look) or ambient Celis® light guide ring
(e.g. blue, red) on request
Accessories
Finisher chrome 9AB 343 792-061
Finisher gold 9AB 343 792-071
Ceiling lights
51
Inte
rio
r lig
hts
LED spots round, fl at fl ush-mounting/surface-mounting
5 V, flush-mounting version only 14 mm /surface-mounting version only 22 mm
Individual packaging
comprising 1 LED spot, 1 coloured light frame, 1 coloured installation frame,
1 sealing ring for installation
For flush mounting,
fixed
Finisher colour*:
Standard LED
spot 1.5 W
High-Power LED spot 2.6 W
(double light power with
cooling element)
without Celis®
white 2JA 344 199-001 2JA 344 599-001
black 2JA 344 199-011 2JA 344 599-011
silver 2JA 344 199-021 2JA 344 599-021
with Celis® warm-white ambient
white 2JA 344 199-101 2JA 344 599-101
black 2JA 344 199-111 2JA 344 599-111
silver 2JA 344 199-121 2JA 344 599-121
with Celis® blue ambient
white 2JA 344 199-201 2JA 344 599-201
black 2JA 344 199-211 2JA 344 599-211
silver 2JA 344 199-221 2JA 344 599-221
with Celis® red ambient
white 2JA 344 199-301 2JA 344 599-301
black 2JA 344 199-311 2JA 344 599-311
silver 2JA 344 199-321 2JA 344 599-321
with Celis® orange ambient
white 2JA 344 199-351 2JA 344 599-351
black 2JA 344 199-361 2JA 344 599-361
silver 2JA 344 199-371 2JA 344 599-371
Accessories
Installation frame, the overall height with frame is 22 mm
chrome 9AB 344 192-061
gold 9AB 344 192-071
A control unit is required for the use of more
than one spot
for 4 Standard or High-Power spots
please use ...
5XA 344 150-001
for 8 Standard or 5 High-Power spots
please use ...
5XA 344 150-011
* further trim colours (e.g. real-wood look) available on request
Ceiling lights
Standard LED spot High-Power LED spot
52
LED spots round, fl at fl ush-mounting/surface-mounting
5 V, flush-mounting version only 14 mm /surface-mounting version only 22 mm
Set packaging
comprising 4 LED spots, 4 coloured light frames, 4 coloured installation frames,
4 sealing rings for installation, 1 central control unit
(5XA 344 150-001)
Surface-mounted,
fixed
Finisher colour*:
Standard
LED spot 1.5 W
High-Power LED spot 2.6 W
(double light power with
cooling element)
without Celis®
white 2JA 344 190-001 2JA 344 590-001
black 2JA 344 190-011 2JA 344 590-011
silver 2JA 344 190-021 2JA 344 590-021
with Celis® warm-white ambient
white 2JA 344 190-101 2JA 344 590-101
black 2JA 344 190-111 2JA 344 590-111
silver 2JA 344 190-121 2JA 344 590-121
with Celis® blue ambient
white 2JA 344 190-201
black 2JA 344 190-211
silver 2JA 344 190-221
with Celis® red ambient
white 2JA 344 190-301
black 2JA 344 190-311
silver 2JA 344 190-321
with Celis® orange ambient
white 2JA 344 190-351
black 2JA 344 190-361
silver 2JA 344 190-371
Accessories
Installation frame, the overall height with frame is 22 mm
chrome 9AB 344 192-061
gold 9AB 344 192-071
A control unit is required for the use of more
than one spot
for 4 Standard or High-Power spots
please use ...
5XA 344 150-001
for 8 Standard or 5 High-Power spots
please use ...
5XA 344 150-011
* further trim colours (e.g. real-wood look) available on request
Ceiling lights
Standard LED spot High-Power LED spot
53
Inte
rio
r lig
hts
Ceiling lights
Bulb-type spot, round
Voltage 12 V, clear lens, with 12 V / 5 W halogen bulb
Installation: either screw-type or spring-clamp fastening
Flush-mounting, fixed (not shown), mounting: screw attachment
Finisher colour*:
white 2JA 343 985-001
black 2JA 343 985-011
silver 2JA 343 985-041
Accessories
Round finisher with rounded edges
chrome 9AB 344 045-061
gold 9AB 344 045-071
Metal frame, stainless polished 9AB 959 505-501
Metal frame, stainless,satin finished 9AB 959 505-561
Flush-mounted, adjustable
Finisher colour*:
white 2JA 343 795-001
black 2JA 343 795-011
silver 2JA 343 795-021
* further trim colours (e .g. real-wood look) available on request
Accessories
Chrome finisher 9AB 343 792-061
Gold finisher 9AB 343 792-071
EuroLED
for surface-mounting, cast in one piece with the base plate, 1 white Power-LED,
white lens, electrical connection through a cable 2,500 mm long,
multi-voltage 9 – 33 V, IP 6K6K, IP 6K7K
12 V/4 W, current consumption = approx. 0.33 A 2JA 959 820-501
EuroLED Touch
for surface-mounting, cast in one piece with the base plate, 1 white and 8 red
LEDs, white lens, electrical connection through a cable 2,500 mm long, multi-
voltage 9 – 33 V, with sensitive switch, for on/off and dimming as well as
changing between white and red light, IP 6K6K, IP 6K7K
12 V/3 W, current consumption = approx. 0.25 A
black cover trim 2JA 959 950-031
white cover trim 2JA 959 950-041
54
Ceiling lights
= ADR / GGVS tested
Mini OvalLED
for flush-mounting, 4 white LEDs, 1 ambient LED, brilliant-finish and clear lens,
black housing, ambient lighting can be switched on, illumination for the driver or
instrument area at the side, IP 6K9K (variant without switch), temperature range
–40 °C to +60 °C
12 V/3.6 W, current consumption = approx. 0.30 A
Red ambient, without frame and switch
Premium G-LED 2JA 343 570-011
Standard E-LED 2JA 343 570-031
Red ambient, with frame and switch
Premium G-LED 2JA 343 570-051
Standard E-LED 2JA 343 570-071
Blue ambient, without frame and switch
Premium G-LED 2JA 343 570-117
Blue ambient, with frame and switch
Premium G-LED 2JA 343 570-157
CargoLED, flush-mounting
for flush-mounting, 4 white Power LEDs, clear lens and aluminium installation
frame, electrical connection through a cable 310 mm long, multi-voltage
9 – 31 V, broader illumination at close range, ADR / GGVS tested, temperature
range –40 °C to +60 °C, IP 6K9K
12 V/6 W, current consumption = approx. 0.46 A
Cold white LEDs 2JB 343 227-001
Warm white LEDs 2JB 343 227-041
Accessories
Installation frame grey 9XD 344 118-101
DuraLed
for surface-mounting, cast in one piece with white base plate, 36 white LEDs,
clear lens and white housing, electrical connection through a cable 2,500 mm
long, multi-voltage 9 – 33 V, broad horizontal and narrow vertical illumination
12 V/9 W, current consumption = approx. 0.75 A 2JA 959 037-511
55
Inte
rio
r lig
hts
Ceiling lights
Transistor ceiling light
for surface-mounting, clear lens, with switch, compact fluorescent light, full
interference suppression
255 mm long, 7 W 2JA 007 373-001
285 mm long, 9 W 2JA 007 373-031
355 mm long, 11 W 2JA 007 373-061
440 mm long, 8 W 2JA 007 372-001
670 mm long, 13 W 2JA 007 372-041
LED lights
for surface-mounting, 355 mm long, with switch, lens and frame made of
impact-proof material, multi-voltage 10 – 30 V
12 LEDs 2JA 007 373-151
24 LEDs 2JA 007 373-161
56
LED step light
for flush-mounting, 1 LED, clear lens, electrical connection through a potted
cable 100 mm long, white cover cap, seal, attachment either using 2 screws or
with snap-on attachment, broad illumination at close range
12 V/0.5 W, current consumption = approx. 0.04 A
White LEDs 2JA 998 560-017
Blue LEDs 2JA 998 560-057
LED step light
for flush-mounting, cast in one piece, 10 white LEDs, clear lens, cable
2,500 mm long, with screws, screw caps, seal and cable connector
12 V/2 W, current consumption = approx. 0.17 A 2JA 959 073-001
Orientation lights
LED step light
for surface-mounting, cast in one piece with grey base plate, 10 white LEDs,
clear lens, grey cover caps, electrical connection through a cable 500 mm long,
wide illumination at close range, IP 6K9K, temperature range – 40 °C to + 60 °C
12 V/1.8 W, current consumption = approx. 0.15 A
12 V, white LEDs 2JA 343 606-007
12 V, blue LEDs 2JA 343 606-201
LED step light
for surface-mounting, cast in one piece with the base plate, clear lens, grey
housing, for horizontal or vertical surface-mounting, electrical connection
through flat plug and grommet, with prism rod as light aperture body
12 V/0.7 W, current consumption = approx. 0.08 A
12 V, 2 white LEDs 2JA 008 078-031
57
Inte
rio
r lig
hts
Orientation lights
Mini ThinLED
for surface-mounting, cast in one piece with grey base plate, clear lens,
electrical connection through a cable 170 mm long, wide illumination at close
range, temperature range – 40 °C to + 60 °C, IP 6K9K
12 V/0.7 W, current consumption = approx. 0.06 A
12 V, 5 white LEDs 2JA 343 660-101
LED entry and awning light
for surface-mounting, for 12 V, for optimum illumination of the steps and the
area in front, with 3 tubular bulbs à 5 W, housing painted silver-coloured
12 V 2XT 008 929-001
LED entry and awning light
for surface-mounting, 4 times the light intensity of the bulb-based version, multi-
voltage 9 – 31 W, clear lens, housing painted silver-coloured, 3 High-Power
LEDs, light colour 4000 K, energy consumption: 4.5 W at 12 V
2XT 008 929-011
LED step light
for flush-mounting, 2 LEDs, clear lens, seal, fastening screws and screw caps,
dust and waterproof, with inverse polarity protection, multi-voltage 10–33 V,
electrical connection through a cable 120 mm long
12 V/0.5 W, current consumption = approx. 0.04 A
White LEDs 2XT 959 510-427
Blue LEDs 2XT 959 510-657
58
Orientation lights
LED step light
Cockpit or map-reading light, emergency and night-lighting
for flush-mounting, 4 LEDs, clear lens, with white ring for covering the 3
fastening screws, with cable 120 mm long, seal and fastening screws, dust and
waterproof, with inverse polarity protection, multi-voltage 10–33 V
12 V/1 W, current consumption = approx. 0.06 A
White LEDs 2XT 959 500-677
Blue LEDs 2XT 959 500-207
Accessories
Metal frame, stainless polished 9AB 959 505-501
Metal frame, stainless,satin finished 9AB 959 505-561
LED step light
for flush-mounting, with 4 white LEDs, with polished steel frame
12 V 2XT 980 500-227
LED step light
for flush-mounting with polished steel frame, multi-voltage 10–33 V
1 blue LED 2XT 959 680-611
1 white LED 2XT 959 680-811
LED step light
for flush-mounting, with 4 white LEDs, with square white frame
12 V 2XT 980 580-051
12 V, High-Power 2XT 980 580-551
59
Inte
rio
r lig
hts
Spot reading light
for surface-mounting, powerful glare-free light source with flexible metal arm,
with bracket for permanent installation, inc. Xenon bulb 12 V/6 W
for fixed installation
500 mm 2AB 004 532-001
195 mm 2AB 004 532-011
with plug for cigarette lighter
160 mm 2AB 004 532-021
Reading lights
LED reading light, flexibly adjustable arm
for surface-mounting, 1 white Power-LED, lens with pattern, electrical
connection through a cable 150 mm long, multi-voltage 9–31 V, narrow
illumination, ideal for map-reading, 12 V/2.5 W, current consumption = approx.
0.20 A
Finisher colour white*
150 mm 2JA 343 720-011
400 mm 2JA 343 720-111
Finisher colour black*
150 mm 2JA 343 720-021
400 mm 2JA 343 720-121
Finisher colour silver*
150 mm 2JA 343 720-291
400 mm 2JA 343 720-191
with plug for cigarette lighter
Finisher colour white 2JA 343 720-071
Finisher colour black 2JA 343 720-081
Finisher colour silver 2JA 343 720-091
* further finisher colours on request
Reading light
for surface-mounting, halogen bulb, white lens, black housing, integrated on/off
switch in light head, rotatable (340°), pivotable (330°), cable 250 mm long, with
replaceable red lens
12 V/5 W, current consumption = approx. 0.42 A 2AB 004 532-102
60
Ambient lights
LED reading lamp
12 V, with 1 LED, clear lens, installation through fastening element, there are
3 frames (white, grey and black) for installation included in the scope of supply
LED red 2JA 344 170-001
LED blue 2JA 344 170-011
LED white 2JA 344 170-021
LED amber 2JA 344 170-031
Variant LED white with silver instead of grey frame 2JA 344 170-201
61
Inte
rio
r lig
hts
Accessories
Rear view camera system RVS-1 Page 63
Intelligent Battery Sensor Page 64 – 65
Switches, plugs, sockets Page 66 – 67
Battery chargers Page 66
Hazard warning lights Page 67
Hand lamps Page 67
Boxes of spare bulbs Page 67
You will find more accessories, relays, normally open relays, changeover
relays, sensors, actuators and worklights in our main catalogues and on the
internet.
62
Rear view camera system RVS-1 ... see what is behind
Rear view camera system RVS-1
Scope of supply: High-quality rear view camera RVC-1, inc. 5-inch TFT monitor
of the very best quality, 10 m professional harness and installation material.*
Set 5BD 009 690-001
Monitor: 034873
� High temperature resistance: -40° to
+85° C
� Variable attachment possibilities (e .g.
on tailgates, spoilers, handle strips)
� Compact TFT monitor with 12.6 cm
diagonal screen size. Also suitable for
connection to other video sources
(DVD, DVB-T etc.).
� High-grade digital image recording
1/3 inch CMOS with 250,000 pixel
� The camera can also be connected to
displays already in the vehicle
� Image signal: NTSC
� Minimum dimensions
(W x H x D with bracket:
56 x 47 x 38 mm)
� Is automatically activated when reverse
gear is engaged
� Very large visible range
92° vertical and 120° horizontal
� High night vision ability
� Extremely high vibration resistance
Representation of the situation behind the vehicle For motor homes For mobile home extensions
Surface-mounting housing
RVC-1 solo 9BG 169 974-001
RVC-1 in combination with safety stoplight 9BG 169 975-001
Rear view camera RVC-1
inc. installation material 5BD 166 175-001
Camera: 034874
* Optionally available: cinch cable adapter
for camera 8KB 169 080-001
for monitor 8KB 169 079-001
10 m supplementary cable set 8KB 166 530-001
63
Ac
ce
sso
rie
s
IBScontrol: Intelligent Battery Sensor with colour displayWhich motor home or caravan enthusiast hasn’t experienced
the problem? Shortly before the holiday starts, the caravan or
motor home battery is completely charged. The fi rst few days of
the holiday are OK, but then the battery suddenly gives up the
ghost. That's the end of it! There are a multitude of possible
reasons. For one thing, vehicles contain more and more
consumers. In addition, as batteries get older, they are no longer
able to be charged up to 100% of their nominal capacity. Hella’s
IBScontrol measures the actual battery capacity still available
and shows it clearly on a colour display.
The IBScontrol reduces battery risk to a minimum:
� Permanent monitoring of the battery
� The most important information at a glance
� Precision due to battery-specifi c adjustment
� Energy management of consumers
� Intuitive control
� Very simple mounting thanks to plug-and-play installation
1. Remaining running time
Shows the remaining running
time with current
consumption value
2. Current display
Red = discharging
Green = charging
3. Current as numerical value
Example: Current drain 0.1 A
4. Battery aging
(SOH = State of Health)
Example: The original battery
capacity has already been
reduced by 2 %
5. Charge state
(SOC = State of charge)
Current state of charge
of the battery
Example: Charge state 88 %
IBScontrol: the detailsIBScontrol: the details
� Intelligent battery sensor with colour display for
12 V vehicle electric systems
� Connection of one or two batteries possible
� Precise determination and representation of battery capacity,
aging and remaining running time.
� Convenient retrofi t energy management
� Extremely low current consumption thanks to automatic
switch-off feature
� Four switch outputs and buzzer can be programmed
individually, including hysteresis
� Battery-specifi c adjustment of the system by selecting the
respective battery characteristic curves (standard starter, gel
and AGM)
� Data logging on SD-card with simple evaluation possibility
� Surface-mounted or fl ush-mounted version
1 4
23 5
64
IBScontrol: the variants
IBScontrol Set with display for surface-mounting variant
IBScontrol display (high-sheen, black), battery sensor IBS, battery pole adapter,
completely pre-fitted harness, operating/mounting instructions (CD-ROM),
installation material (screw, cable tie, support plates depending on variant)
Surface-mounting version 6PY 178 103-811
IBScontrol Set with display for flush-mounting variant
IBScontrol display (high-sheen, black), battery sensor IBS, battery pole adapter,
completely pre-fitted harness, operating/mounting instructions (CD-ROM),
installation material (screw, cable tie, support plates depending on variant)
Flush-mounting version 6PY 178 103-831
IBScontrol extension set
Extension set to monitor second battery, battery sensor IBS, battery pole
adapter, completely pre-fitted harness
Set 6PY 178 103-841
65
Ac
ce
sso
rie
s
Accessories
Battery circuit-breaker
for flush or surface-mounting, removable side wall –
several switches can be connected together, cable
connection: 2 x M10 screws, protective rating IP 56
according to DIN 40 050, load capacity: 225 A
(permanent load) at 12 V / 24 V, max. 1000 A (10 s) at
12 V / 24 V, central contact (58L / 7) with contact pin,
load capacity: 20 A at 12 V
6EK 002 843-071
Battery circuit-breaker
max. load: 1000 A at 12 V (10 s), 500 A at 24 V
(10 s) , max. permanent load: 50 A with connected
35 mm cable
Type of protection DIN 40050, IP X2 6EK 002 843-002
Series of rocker switches
without illumination, with
orientation lighting or with
functional lighting
6EH 007 832-…
Switch with symbol for steps 6EH 354 100-…
The entire range of switches can be found in the
main Hella Electrics catalogue.
Door-contact switch
Load capacity: 0.4 A at 12 V
6ZF 007 239-001
Socket/plug
7-pole in accordance with ISO 1724, plastic
version, screw connections, 12 V
Connector socket 8JB 001 943-003
Connector 8JA 001 930-003
Cable adapter
from 13-pole socket (ISO 11 446) on the traction
vehicle to 7-pole connector (ISO 11 446) on the
trailer, with cable 250 mm long
12 V 8JA 005 952-001
Super-short adapter
from 13-pole socket (ISO 11 446) on the traction
vehicle to 7-pole connector (ISO 11 446) on the
trailer
12 V 8JA 008 969-001
Connector socket
13-pole in accordance with ISO 11 446, plastic
version, screw connections, 12 V
with rubber grommet
and rubber seal in
hinged cover
8JB 005 949-001
with rear fog light switch-
off
8JB 005 949-011
Mini-short adapter
from 7-pole socket (ISO 1724) on the traction
vehicle to 13-pole connector (ISO 11 446) on the
trailer
12 V 8JA 008 981-001
Socket
2-pole in accordance with ISO 4165, 6.3 mm male
spade connectors, load capacity:
max. 16 A, 6-24 V
a) with spring-loaded
cover
8JB 001 946-082
b) with arresting cover 8JB 001 946-092
Socket
2-pole in accordance with ISO 4165, without
cover, 6.3 mm male spade connectors, load
capacity: max. 16 A
6 – 24 V 8JB 001 946-072
Connector
13-pole in accordance with ISO 11 446, plastic
version,
screw connections, with rubber grommet
12 V 8JA 005 951-001
a) b)
66
Accessories
Hazard warning light
model 3003 ACCU
when the engine is running, the rechargeable
battery is charged through contacts in the charging
bracket. Automatic voltage switchover to match
vehicle electric system 12/24 V, operating time in
flashing mode 40 hours or 7 hours as worklight,
charging bracket and lead-gel rechargeable battery
included in the scope of supply
type-tested 2XW 007 146-011
Hand lamp
with 11 Watt PL-tube, impact-proof protective
tube, handle and cap made of oil and petrol-
resistant rubber, length 44 cm, protective rating
IP 64
Protection class II 2XM 001 974-051
Universal connector
2-pole with screwed tension relief and 8A fuse,
suitable for cigarette lighters and standard sockets
(ISO 4165), screw connection up to 2.5 mm
6 – 24 V 8JA 007 589-001
Power socket
2-pole with cover and clamping sleeve, suitable for
cigarette lighter socket, 6.3 mm male space
connectors, load capacity: max. 16 A
6 – 24 V 8JB 008 023-001
Connector
2-pole in accordance with ISO 4165
6 – 24 V 8JA 002 262-001
Hazard warning light
model 3003 ACCU
with attachment bracket (for battery operation
through 5 mono cells, not included in the scope of
supply)
type-tested 2XW 007 146-001
Surface-mounted socket
2-pole in accordance with ISO 4165, screw
connections,
load capacity: max. 16 A
6 – 24 V 8JB 004 123-001
Battery charger Turbo-Charger
CE-tested, 230 V / 50 Hz / 350 W,
normal charge 9 A, fast charge 17 A,
safe operation thanks to overload protection
8ES 004 417-031
Battery charger Power-Charger
10 automatic
CE-tested, 230 V / 50 Hz / 130 W,
normal charge 7 A, fast charge 10 A,
automatic switch-off, safe operation thanks to
overload protection
8ES 004 417-041
Battery charger Mini-Charger
automatic 6/12 V
CE-tested, 230 V / 50 Hz / 10 W, charging current at
6 V = 0.8 A or at 12 V = 0.6 A, automatic switch-
off, suitable for gel batteries, with inverse polarity
protection
8ES 006 266-011
LE'D hand lamps
Cable length 5000 mm
42 LEDs, 220 V 2XM 001 974-201
30 LEDs, 12 V 2XM 001 974-211
60 LEDs, 12 V 2XM 001 974-221
Boxes of spare bulbs
A must for every responsible camper. The
assortment contains one bulb each for the most
common lighting functions as well as various spare
fuses.
H4, 12 V 8GJ 002 525-913
H9, 12 V (not shown) 8GH 007 157-901
67
Ac
ce
sso
rie
s
© Hella KGaA Hueck & Co., Lippstadt 9Z2 999 130-037 Sch/09.10/1.7 Printed in Germany
Ideas today forthe cars of tomorrow
Hella KGaA Hueck & Co.Rixbecker Straße 7559552 Lippstadt, Germany
Tel.: +49 2941 38-0Fax: +49 2941 38-7133Internet: www.hella.com