Econo Mode / EcoMode | The Economymode allows up to 25%energy
saving.It operates at the highestpossible performance withthe least
power consumption.
its can be set to function ortimer clock.
and assured with the new Carriernce, each unit is equipped with
apor ts the unit's status to ensure fast
Up to three Operating Modes plus Auto Mode |There are three
operating modes in every Carrier Air Conditioner:
Cooling,Dehumidification, and Fan-Only. This ensures that you can
control roomtemperature to within thatof your comfort zone allyear
round. There is alsoAutomatic mode that allowsthe microprocessor
tochoose how to achieve yourpreferred temperaturewithout human
intervention.
sing unit has been
Single-Split Air-Con now comes in stylish, compact and
economical units loaded with powerful
and private dwellings. With its Triple Clean Filter, which
effectively kills bacteria, removes odour and
ured of clean and fresh air all the time. Enjoy the comfort you
deserve!
Room temp.-Set temp.
+4
+1
-1
Cooling Mode Louver downward
Cooling Mode
Dry Mode
Fan only Mode
+4cThermostat
Setting
RoomTemp.
COOLING
Set
+2
+1
Set temp.is changed
Set temp.is changed
Time0Hr 1Hr 2Hr
Air Quality, More Energy Saving
w Useful Features & Functions
Triple Clean Filter | Threelayers of extra protection againstthe
elements. This includes a dustcollecting filter, a static filter
forsmaller dust particles, and a carbonfilter for trapping odours
andbacteria. Our technology ensuresthat you are reminded every
40days that the filter needs cleaning.
Econo Mode / EcoMode | The Economymode allows up to 25%energy
saving.It operates at the highestpossible performance withthe least
power consumption.
12 hr On-Off Timer | Units can be set to function ordiscontinue
function via a 12-hour timer clock.
Auto Diagnosis | Feel save and assured with the new CarrierAir
Conditioner. For your convenience, each unit is equipped with
asmart auto system diagnosis that repor ts the unit's status to
ensure fastand effective repair.
Up to three Operating Modes plus Auto Mode |There are three
operating modes in every Carrier Air Conditioner:
Cooling,Dehumidification, and Fan-Only. This ensures that you can
control roomtemperature to within thatof your comfort zone allyear
round. There is alsoAutomatic mode that allowsthe microprocessor
tochoose how to achieve yourpreferred temperaturewithout human
intervention.
Continuous | Carrier condensing unit has beentested under the
strict quality control system. Especially,A compressor, key
component for air conditioners hasbeen tested over 3,500 hours as a
life test.
Carrier Pure Dew Series Single-Split Air-Con now comes in
stylish, compact and economical units loaded with powerfulfeatures,
which is ideal for HDB and private dwellings. With its Triple Clean
Filter, which effectively kills bacteria, removes odour and
prevents mould, you can be assured of clean and fresh air all
the time. Enjoy the comfort you deserve!
3 - Stage Fan Speed Control
Room temp.-Set temp.
+4
+1
-1
Cooling Mode Louver downward
Cooling Mode
Dry Mode
Fan only Mode
+4c
+2c
High Medium Low
ThermostatSetting
RoomTemp.
Fan Speed
COOLING
Set
+2
+1
Set temp.is changed
Set temp.is changed
Time0Hr 1Hr 2Hr
Better Air Quality, More Energy Saving
New Useful Features & Functions
42CJR Series42CJR Series
Washable Front Panel | An easily removable frontpanel provides
quick, effor tless cleaning.
Random Pitch Fan with Skew Blade | With our SkewBlade
technology, out-put noise has been reduced to only 26 dB.
Multi-Bending Heat Exchanger | The bends onour new Heat
Exchanger create greater surface area, whereas
heat can escape easier and the room is cooled faster with
muchless energy.
42CJR010/38CJR010Amount of output:
1 HP (2.57 - 2.62 kw.)Recommended space:12-15 square meters.
42CJR013/38CJR013Amount of output:
1.5 HP (3.60 - 3.65 kw.)Recommended space:16-20 square
meters.
42CJR018/38CJR018Amount of output:
2.0 HP (5.20 - 5.25 kw.)Recommended space:20-30 square
meters.
42CJR024/38CJR024Amount of output:
3.0HP (6.40 - 6.45 kw.)Recommended space:30-35 square
meters.
User friendly Remote Control | Wireless, trouble-free remote
controls for maximumease of use.
Temperature Button ( ).....The set temperature is increased up
to30oC......The set temperature is dropped down to19oC
START/STOP Button
Fan Speed Button (FAN)Press this button to select fan speed.
when youselect AUTO, the fan speed is automaticallyadjusted
according to the room temperature. Youcan also manually select the
desire fan speed fromamong four settings.
(QUIET, LOW , MED , HIGH )
ECO Button (ECO)Press this button to start the ECO
operation.
Auto Diagnosis (CHK)Service man pushes this button to check
thelocation of a problem.
Cancel Button (CLR)Press this button to cancel ON timer and
OFF
timer.
Reserve Button (SET)Press this button to reserve time
settings.
AUTO COOL DRY AUTO FAN
Infrared Signal Emitter
Set Louver Button (FIX)Press this button to adjust the air
flow
direction.
Auto Louver Button (SWING)Press this button to swing the
horizontal
louver.Press the SWING button again to stopthe louver
swinging.
Mode Select Button (MODE)Press this button to select a mode.Each
time you press the button, a mode isselected in a sequence as
following order.
Reset Button (RTS)Push this button when the batteries of
theremote control have been replaced.
On Timer Button (ON)
Off Timer Button (OFF)
Temperature Button ( ).....The set temperature is increased up
to30oC......The set temperature is dropped down to19oC
START/STOP Button
Fan Speed Button (FAN)Press this button to select fan speed.
when youselect AUTO, the fan speed is automaticallyadjusted
according to the room temperature. Youcan also manually select the
desire fan speed fromamong four settings.
(QUIET, LOW , MED , HIGH )
ECO Button (ECO)Press this button to start the ECO
operation.
Auto Diagnosis (CHK)Service man pushes this button to check
thelocation of a problem.
Cancel Button (CLR)Press this button to cancel ON timer and
OFF
timer.
Reserve Button (SET)Press this button to reserve time
settings.
AUTO COOL DRY AUTO FAN
Infrared Signal Emitter
Set Louver Button (FIX)Press this button to adjust the air
flow
direction.
Auto Louver Button (SWING)Press this button to swing the
horizontal
louver.Press the SWING button again to stopthe louver
swinging.
Mode Select Button (MODE)Press this button to select a mode.Each
time you press the button, a mode isselected in a sequence as
following order.
Reset Button (RTS)Push this button when the batteries of
theremote control have been replaced.
On Timer Button (ON)
Off Timer Button (OFF)
Washable Front Panel | An easily removable frontpanel provides
quick, effor tless cleaning.
Random Pitch Fan with Skew Blade | With our SkewBlade
technology, out-put noise has been reduced to only 26 dB.
Multi-Bending Heat Exchanger | The bends onour new Heat
Exchanger create greater surface area, whereas
heat can escape easier and the room is cooled faster with
muchless energy.
42CJR010/38CJR010Amount of output:
1 HP (2.57 - 2.62 kw.)Recommended space:12-15 square meters.
42CJR013/38CJR013Amount of output:
1.5 HP (3.60 - 3.65 kw.)Recommended space:16-20 square
meters.
42CJR018/38CJR018Amount of output:
2.0 HP (5.20 - 5.25 kw.)Recommended space:20-30 square
meters.
42CJR024/38CJR024Amount of output:
3.0HP (6.40 - 6.45 kw.)Recommended space:30-35 square
meters.
User friendly Remote Control | Wireless, trouble-free remote
controls for maximumease of use.
3 Selectable fan speeds, plus Auto mode and Quiet mode | Choose
yourdesired airflow among the three fan speeds offered by the new
Carrier 42CJR series air-conditioner orselect the Auto fan-speed
mode, which the air-conditioner choose optimal fan speed from High,
Middle andLow, depending on the room temperature condition. For
more choices, the Quiet fan-speed mode providesyou with most lowest
fan speed at very low noise: 25dB.
Auto Restart | The indoor unit is equipped with an automatic
restarting function which allows theunit to restart operating with
the set operating conditions in the event of power supply being
accidentallyshut down. The operation will resume without warning
three minutes after power is restored.
Temperature Button ( ).....The set temperature is increased up
to30oC......The set temperature is dropped down to19oC
START/STOP Button
Fan Speed Button (FAN)Press this button to select fan speed.
when youselect AUTO, the fan speed is automaticallyadjusted
according to the room temperature. Youcan also manually select the
desire fan speed fromamong four settings.
(QUIET, LOW , MED , HIGH )
ECO Button (ECO)Press this button to start the ECO
operation.
Auto Diagnosis (CHK)Service man pushes this button to check
thelocation of a problem.
Cancel Button (CLR)Press this button to cancel ON timer and
OFF
timer.
Reserve Button (SET)Press this button to reserve time
settings.
AUTO COOL DRY AUTO FAN
Infrared Signal Emitter
Set Louver Button (FIX)Press this button to adjust the air
flow
direction.
Auto Louver Button (SWING)Press this button to swing the
horizontal
louver.Press the SWING button again to stopthe louver
swinging.
Mode Select Button (MODE)Press this button to select a mode.Each
time you press the button, a mode isselected in a sequence as
following order.
Reset Button (RTS)Push this button when the batteries of
theremote control have been replaced.
On Timer Button (ON)
Off Timer Button (OFF)
Temperature Button ( ).....The set temperature is increased up
to30oC......The set temperature is dropped down to19oC
START/STOP Button
Fan Speed Button (FAN)Press this button to select fan speed.
when youselect AUTO, the fan speed is automaticallyadjusted
according to the room temperature. Youcan also manually select the
desire fan speed fromamong four settings.
(QUIET, LOW , MED , HIGH )
ECO Button (ECO)Press this button to start the ECO
operation.
Auto Diagnosis (CHK)Service man pushes this button to check
thelocation of a problem.
Cancel Button (CLR)Press this button to cancel ON timer and
OFF
timer.
Reserve Button (SET)Press this button to reserve time
settings.
AUTO COOL DRY AUTO FAN
Infrared Signal Emitter
Set Louver Button (FIX)Press this button to adjust the air
flow
direction.
Auto Louver Button (SWING)Press this button to swing the
horizontal
louver.Press the SWING button again to stopthe louver
swinging.
Mode Select Button (MODE)Press this button to select a mode.Each
time you press the button, a mode isselected in a sequence as
following order.
Reset Button (RTS)Push this button when the batteries of
theremote control have been replaced.
On Timer Button (ON)
Off Timer Button (OFF)
Temperature Button ( ).....The set temperature is increased up
to30oC......The set temperature is dropped down to19oC
START/STOP Button
Fan Speed Button (FAN)Press this button to select fan speed.
when youselect AUTO, the fan speed is automaticallyadjusted
according to the room temperature. Youcan also manually select the
desire fan speed fromamong four settings.
(QUIET, LOW , MED , HIGH )
ECO Button (ECO)Press this button to start the ECO
operation.
Auto Diagnosis (CHK)Service man pushes this button to check
thelocation of a problem.
Cancel Button (CLR)Press this button to cancel ON timer and
OFF
timer.
Reserve Button (SET)Press this button to reserve time
settings.
AUTO COOL DRY AUTO FAN
Infrared Signal Emitter
Set Louver Button (FIX)Press this button to adjust the air
flow
direction.
Auto Louver Button (SWING)Press this button to swing the
horizontal
louver.Press the SWING button again to stopthe louver
swinging.
Mode Select Button (MODE)Press this button to select a mode.Each
time you press the button, a mode isselected in a sequence as
following order.
Reset Button (RTS)Push this button when the batteries of
theremote control have been replaced.
On Timer Button (ON)
Off Timer Button (OFF)
38CJR010,013 38CJR018,024
